Refine
Has Fulltext
- yes (9) (remove)
Year of publication
- 2004 (9) (remove)
Document Type
- Doctoral Thesis (6)
- Postprint (3)
Language
- English (9) (remove)
Keywords
- Diodenlaserspektroskopie (2)
- Isotopenverhältnis (2)
- Kohlendioxid (2)
- water (2)
- Bindung (1)
- Bodengas (1)
- Calcium (1)
- Chitosan (1)
- Ferrofluid (1)
- Gadolinium (1)
Institute
- Institut für Chemie (9) (remove)
New chain transfer agents based on dithiobenzoate and trithiocarbonate for free radical polymerization via Reversible Addition-Fragmentation chain Transfer (RAFT) were synthesized. The new compounds bear permanently hydrophilic sulfonate moieties which provide solubility in water independent of the pH. One of them bears a fluorophore, enabling unsymmetrical double end group labelling as well as the preparation of fluorescent labeled polymers. Their stability against hydrolysis in water was studied, and compared with the most frequently employed water-soluble RAFT agent 4-cyano-4-thiobenzoylsulfanylpentanoic acid dithiobenzoate, using UV-Vis and 1H-NMR spectroscopy. An improved resistance to hydrolysis was found for the new RAFT agents, providing good stabilities in the pH range between 1 and 8, and up to temperatures of 70°C. Subsequently, a series of non-ionic, anionic and cationic water-soluble monomers were polymerized via RAFT in water. In these experiments, polymerizations were conducted either at 48°C or 55°C, that are lower than the conventionally employed temperatures (>60°C) for RAFT in organic solvents, in order to minimize hydrolysis of the active chain ends (e.g. dithioester and trithiocarbonate), and thus to obtain good control over the polymerization. Under these conditions, controlled polymerization in aqueous solution was possible with styrenic, acrylic and methacrylic monomers: molar masses increase with conversion, polydispersities are low, and the degree of end group functionalization is high. But polymerizations of methacrylamides were slow at temperatures below 60°C, and showed only moderate control. The RAFT process in water was also proved to be a powerful method to synthesize di- and triblock copolymers including the preparation of functional polymers with complex structure, such as amphiphilic and stimuli-sensitive block copolymers. These include polymers containing one or even two stimuli-sensitive hydrophilic blocks. The hydrophilic character of a single or of several blocks was switched by changing the pH, the temperature or the salt content, to demonstrate the variability of the molecular designs suited for stimuli-sensitive polymeric amphiphiles, and to exemplify the concept of multiple-sensitive systems. Furthermore, stable colloidal block ionomer complexes were prepared by mixing anionic surfactants in aqueous media with a double hydrophilic block copolymer synthesized via RAFT in water. The block copolymer is composed of a noncharged hydrophilic block based on polyethyleneglycol and a cationic block. The complexes prepared with perfluoro decanoate were found so stable that they even withstand dialysis; notably they do not denaturate proteins. So, they are potentially useful for biomedical applications in vivo.
Combining the magnetic properties of a given material with the tremendous advantages of colloids can exponentially increase the advantages of both systems. This thesis deals with the field of magnetic nanotechnology. Thus, the design and characterization of new magnetic colloids with fascinating properties compared with the bulk materials is presented. Ferrofluids are referred to either as water or organic stable dispersions of superparamagnetic nanoparticles which respond to the application of an external magnetic field but lose their magnetization in the absence of a magnetic field. In the first part of this thesis, a three-step synthesis for the fabrication of a novel water-based ferrofluid is presented. The encapsulation of high amounts of magnetite into polystyrene particles can efficiently be achieved by a new process including two miniemulsion processes. The ferrofluids consist of novel magnetite polystyrene nanoparticles dispersed in water which are obtained by three-step process including coprecipitation of magnetite, its hydrophobization and further surfactant coating to enable the redispersion in water and the posterior encapsulation into polystyrene by miniemulsion polymerization. It is a desire to take advantage of a potential thermodynamic control for the design of nanoparticles, and the concept of "nanoreactors" where the essential ingredients for the formation of the nanoparticles are already in the beginning. The formulation and application of polymer particles and hybrid particles composed of polymeric and magnetic material is of high interest for biomedical applications. Ferrofluids can for instance be used in medicine for cancer therapy and magnetic resonance imaging. Superparamagnetic or paramagnetic colloids containing iron or gadolinium are also used as magnetic resonance imaging contrast agent, for example as a important tool in the diagnosis of cancer, since they enhance the relaxation of the water of the neighbouring zones. New nanostructured composites by the thermal decomposition of iron pentacarbonyl in the monomer phase and thereafter the formation of paramagnetic nanocomposites by miniemulsion polymerization are discussed in the second part of this thesis. In order to obtain the confined paramagnetic nanocomposites a two-step process was used. In the first step, the thermal decomposition of the iron pentacarbonyl was obtained in the monomer phase using oleic acid as stabilizer. In the second step, this iron-containing monomer dispersion was used for making a miniemulsion polymerization thereof. The addition of lanthanide complexes to ester-containing monomers such as butyl acrylate and subsequent polymerization leading to the spontaneous formation of highly organized layered nanocomposites is presented in the final part of this thesis. By an one-step miniemulsion process, the formation of a lamellar structure within the polymer nanoparticles is achieved. The magnetization and the NMR relaxation measurements have shown these new layered nanocomposites to be very apt for application as contrast agent in magnetic resonance imaging.
The performance of a home-built tunable diode laser (TDL) spectrometer has been optimized regarding multi-line detection of carbon dioxide in natural gases. In the regime of the (30<SUP>0</SUP>1)<SUB>III</SUB> ← (000) band of <SUP>12</SUP>CO<SUB>2</SUB> around 1.6 μm, the dominating isotope species <SUP>12</SUP>CO<SUB>2</SUB>, <SUP>13</SUP>CO<SUB>2</SUB>, and <SUP>12</SUP>C<SUP>18</SUP>O<SUP>16</SUP>O were detected simultaneously. In contrast to most established techniques, selective measurements are performed without any sample preparation. This is possible since the CO<SUB>2</SUB> detection is free of interference from water, ubiquitous in natural gases. Detection limits in the range of a few ppmv were obtained for each species utilizing wavelength modulation (WM) spectroscopy with balanced detection in a long-path absorption cell set-up. Linear calibration plots cover a dynamic range of four orders of magnitude, allowing for quantitative CO<SUB>2</SUB> detection in various samples, like soil and breath gas. High isotopic resolution enables the excellent selectivity, sensitivity, and stability of the chosen analytical concept. The obtained isotopic resolution of typically ± 1.0 ‰ and ± 1.5 ‰ (for 3 vol. % and 0.7 vol. % of CO<SUB>2</SUB>, respectively) offers a promising analytical tool for isotope-ratio determination of carbon dioxide in soil gas. Preliminary experiments on soil respiration for the first time combine the on-line quantification of the overall carbon dioxide content with an optode sensor and isotopic determination (TDL system) of natural gas species.
The drift time spectra of polycyclic aromatic hydrocarbons (PAH), alkylbenzenes and alkylphenylethers were recorded with a laser-based ion mobility (IM) spectrometer. The ion mobilities of all compounds were determined in helium as drift gas. This allows the calculation of the diffusion cross sections (Omegacalc) on the basis of the exact hard sphere scattering model (EHSSM) and their comparison with the experimentally determined diffusion cross sections (Omegaexp). These Omegaexp/Omegacalc-correlations are presented for molecules with a rigid structure like PAH and prove the reliability of the theoretical model and experimental method. The increase of the selectivity of IM spectrometry is demonstrated using resonance enhanced multiphoton ionisation (REMPI) at atmospheric pressure, realized by tuneable lasers. The REMPI spectra of nine alkylbenzenes and alkylphenylethers are investigated. On the basis of these spectra, the complete qualitative distinction of eight compounds in a mixture is shown. These experiments are extended to alkylbenzene isomer mixtures.
The performance of a home-built tunable diode laser (TDL) spectrometer, aimed at multi-line detection of carbon dioxide, has been evaluated and optimized. In the regime of the (30<SUP>0</SUP>1)<SUB>III</SUB> / (000) band of <SUP>12</SUP>CO<SUB>2</SUB> around 1.6 μm, the dominating isotope species <SUP>12</SUP>CO<SUB>2</SUB>, <SUP>13</SUP>CO<SUB>2</SUB>, and <SUP>12</SUP>C<SUP>18</SUP>O<SUP>16</SUP>O were detected simultaneously without interference by water vapor. Detection limits in the range of few ppmv were obtained for each species utilizing wavelength modulation (WM) spectroscopy with balanced detection in a long-path absorption cell set-up. High sensitivity in conjunction with high precision —typically ±1‰ and ±6‰ for 3% and 0.7% of CO<SUB>2</SUB>, respectively— renders this experimental approach a promising analytical concept for isotope-ratio determination of carbon dioxide in soil and breath gas. For a moderate <SUP>12</SUP>CO<SUB>2</SUB> line, the pressure dependence of the line profile was characterized in detail, to account for pressure effects on sensitive measurements.
The goal of this work was to study the binding of ions to polymers and lipid bilayer membranes in aqueous solutions. In the first part of this work, the influence of various inorganic salts and polyelectrolytes on the structure of water was studied using Isothermal Titration Calorimetry (ITC). The heat of dilution of the salts was used as a scale of water structure making and breaking of the ions. The heats of dilution could be attributed to the Hofmeister Series. Following this, the binding of Ca2+ to poly(sodium acrylate) (NaPAA) was studied. ITC and a Ca2+ Ion Selective Electrode were used to measure the reaction enthalpy and binding isotherm. Binding of Ca2+ ions to PAA, was found to be highly endothermic and therefore solely driven by entropy. We then compared the binding of ions to the one-dimensional PAA polymer chain to the binding to lipid vesicles with the same functional groups. As for the polymer, Ca2+ binding was found to be endothermic. Binding of calcium to the lipid bilayer was found to be weaker than to the polymer. In the context of these experiments, it was shown that Ca2+ not only binds to charged but also to zwitterionic lipid vesicles. Finally, we studied the interaction of two salts, KCl and NaCl, to a neutral polymer gel, PNIPAAM, and to the ionic polymer PAA. Combining calorimetry and a potassium selective electrode we observed that the ions interact with both polymers, whether containing charges or not.
Nanostructured materials are the materials having structural features on the scale of nanometers i.e. 10-9 m. the structural features can enhance the natural properties of the materials or induce additional properties, which are useful for day to technology as well as the future technologies One way to synthesize nanostructured materials is using templating techniques. The templating process involves use of a certain “mould” or “scaffold” to generate the structure. The mould is called as the template, can be a single molecule or assembly of molecule or a larger object, which has its own structure. The product material can be obtained by filling the space around the template with a “precursor”, transformation of precursor into the desired material and then removal of template to get product. The precursor can be any chemical moiety that can be easily transformed in to the desired material. Alternatively the desired material is processed into very tiny bricks or “nano building blocks (NBB)” and the product is obtained by arrangement of the NBB by using a scaffold. We synthesized porous metal oxide spheres of namely TiO2-M2O3: titanium dioxide- M-oxide (M = aluminum, gallium and indium) TiO2-M2O3 and cerium oxide-zirconium oxide solid solution. We used porous polymeric beads as templates. These beads used for chromatographic purposes. For the synthesis of TiO2-M2O3 we used metal- alkoxides as precursor. The pore of beads were filled with precursor and then reacted with water to give transformation of the precursor to amorphous oxide network. The network is crystallized and template is removed by heat treatment at high temperatures. In a similar way we obtained porous spheres of CexZr1-xO2. For this we synthesized nanoparticle of CexZr1-xO2 and used then for the templating process to obtain porous CexZr1-xO2 spheres. Additionally, using the same nanoparticles we synthesized nano-porous powder using self-assembly process between a block-copolymers scaffold and nanoparticles. Morphological and physico-chemical properties of these materials were studies systematically by using various analytical techniques TiO2-M2O3 material were tested for photocatalytic degradation of 2-Chlorophenol a poisonous pollutant. While CexZr1-xO2 spheres were tested for methanol steam reforming reaction to generate hydrogen, which is a fuel for future generation power sources like fuel cells. All the materials showed good catalytic performance.
Taking inspiration from nature, where composite materials made of a polymer matrix and inorganic fillers are often found, e.g. bone, shell of crustaceans, shell of eggs, etc., the feasibility on making composite materials containing chitosan and nanosized hydroxyapatite were investigated. A new preparation approach based on a co-precipitation method has been developed. In its earlier stage of formation, the composite occurs as hydrogel as suspended in aqueous alkaline solution. In order to get solid composites various drying procedures including freeze-drying technique, air-drying at room temperature and at moderate temperatures, between 50oC and 100oC were used. Physicochemical studies showed that the composites exhibit different properties with respect to their structure and composition. IR and Raman spectroscopy probed the presence of both chitosan and hydroxyapatite in the composites. Hydroxyapatite as dispersed in the chitosan matrix was found to be in the nanosize range (15-50 nm) and occurs in a bimodal distribution with respect to its crystallite length. Two types of distribution domains of hydroxyapatite crystallites in the composite matrix such as cluster-like (200-400 nm) and scattered-like domains were identified by the transmission electron microscopy (TEM), X-ray diffraction (XRD) and by confocal scanning laser microscopy (CSLM) measurements. Relaxation NMR experiments on composite hydrogels showed the presence of two types of water sites in their gel networks, such as free and bound water. Mechanical tests showed that the mechanical properties of composites are one order of magnitude less than those of compact bone but comparable to those of porous bone. The enzymatic degradation rates of composites showed slow degradation processes. The yields of degradation were estimated to be less than 10% by loss of mass, after incubation with lysozyme, for a period of 50 days. Since the composite materials were found biocompatible by the in vivo tests, the simple mode of their fabrication and their properties recommend them as potential candidates for the non-load bearing bone substitute materials.
Polymer optical fibers (POFs) are a rather new tool for high-speed data transfer by modulated light. They allow the transport of high amounts of data over distances up to about 100 m without be influenced by external electromagnetic fields. Due to organic chemical nature of POFs, they are sensitive to the climate of their environment and therefore the optical fiber properties are as well. Hence, the optical stability is a key issue for long-term applications of POFs. The causes for a loss of optical transmission due to climatic exposures (aging/degradation) are researched by means of chemical analytical tools such as chemiluminescence (CL) and Fourier transform infrared (FTIR) spectroscopy for five different (with respect to manufacturers) step-index multimode PMMA based POFs and for seven different climatic conditions. Three of the five POF samples are studied more in detail to realize the effects of individual parameters and for forecasting longterm optical stability by short-term exposure tests. At first, the unexposed POF components (core, cladding, and bare POF as combination of core and cladding) are characterized with respect to important physical and chemical properties. The glass transition temperature Tg, and the melting temperature Tm are in the region of 120 °C to 140 °C, the molecular weight (Mw) of cores is in the order of 105 g mol-1. POFs are found to have different chemical compositions of their claddings as could be detected by FTIR, but identical compositions of their cores. Two of the POFs are exposed as cables (core, cladding and jacket) for about 3300 hours to the climate 92 °C / 95 % relative humidity (RH) resulting in a different transmission decrease. Investigating the related unexposed and exposed bare POFs for degradation using CL, FTIR, thermogravimetry (TG), UV/visible transmittance and gel permeation chromatography (GPC) suggest that claddings of POFs are more affected than cores. Probably the observed loss of transmission is mainly due to increased light absorption and imperfections at the core-cladding boundary caused by a large degradation of claddings. Hence, it is highly possible that the optical transmission stability of POFs is governed mainly by the thermo-oxidative stability of the cladding and minor of the core. Three bare POFs (core and cladding only) are exposed for different duration of exposure time (30 hours to 4500 hours) to 92 °C / 95 %RH, 92 °C / 50 %RH, 50 °C / 95 %RH, 90 °C / low humidity, 100 °C / low humidity, 110 °C / low humidity and 120 °C / low humidity. In these climates their transmission variations are found to be different from each other, too. The outcomes strongly inform that under high temperature and high humid climates physical changes such as volume expansion, are the main sources for the loss of optical transmission. Also, the optical transmission stability of POFs is found to be dependent on chemical compositions of claddings. Under high temperature and low humid conditions, a loss of transmission at the early stages of the exposure is mainly caused by physical changes, presumable by corecladding interface imperfections. For the later stages of exposures it is proposed to an additional increase of light absorption by core and cladding owes to degradation. Optical simulation results obtained parallel by Mr. L. Jankowski (a PhD student of BAM) are found to confirm these results. For bare POFs, too, the optical stability of POFs seems to depend on their thermo-oxidative stability. Some short-term exposure tests are conducted to realize influences of individual climatic parameters on the transmission property of POFs. It is found that at stationary high temperature and variable humidity conditions POFs display to a certain amount a reversible transmission loss due to physically absorbed water. But in the case of varying temperature and constant high humidity such reversibility is hardly noticeable. However, at room temperature and varying humidity, POFs display fully reversible transmission loss. The whole research described above has to be regarded as a starting point for further investigations. The restricted distribution of fundamental POF data by the manufacturers and the time consuming aging by climatic exposures restrict the results more or less to the samples, investigated here. Significant general statements require for example additional information concerning the variation of POF properties due to production. Nevertheless the tests, described here, have the capability for approximating and forecasting the long-term optical transmission stability of POFs. -------------- Auch im Druck erschienen: Appajaiah, Anilkumar: Climatic stability of polymer optical fibers (POF) / Anilkumar Appajaiah. - Bremerhaven : Wirtschaftsverl. NW, Verl. für neue Wiss., 2005. - Getr. Zählung [ca. 175 S.]. : Ill., graph. Darst. - (BAM-Dissertationsreihe ; 9) ISBN 3-86509-302-7