Refine
Year of publication
- 2004 (208) (remove)
Document Type
- Article (166)
- Doctoral Thesis (29)
- Monograph/Edited Volume (6)
- Habilitation Thesis (4)
- Postprint (3)
Keywords
- Chaos (3)
- Synchronisation (3)
- 3D (2)
- Anisotropie (2)
- Biophysik (2)
- Displays (2)
- Ellipsometrie (2)
- Fluoreszenz (2)
- Kompensatoren (2)
- Photoalignment (2)
Institute
- Institut für Physik und Astronomie (208) (remove)
When exposed to sufficiently high electric fields, polymer-foam electret materials with closed cells exhibit ferroelectric-like behavior and may therefore be called ferroelectrets. In cellular ferroelectrets, the influence of the cell size and shape distributions on the application-relevant properties is not yet understood. Therefore, controlled inflation experiments were carried out on cellular polypropylene films, and the resulting elastical and electromechanical parameters were determined. The elastic modulus in the thickness direction shows a minimum with a corresponding maximum in the electromechanical transducer coefficient. The resonance frequency shifts as a function of the elastic modulus and the relative density of the inflated cellular films. Therefore, the transducer properties of cellular ferroelectrets can be optimized by means of controlled inflation. (C) 2004 American Institute of Physics
We have undertaken a thorough dynamical investigation of five extrasolar planetary systems using extensive numerical experiments. The systems Gl 777 A, HD 72659, Gl 614, 47 Uma and HD 4208 were examined concerning the question of whether they could host terrestrial-like planets in their habitable zones (HZ). First we investigated the mean motion resonances between fictitious terrestrial planets and the existing gas giants in these five extrasolar systems. Then a fine grid of initial conditions for a potential terrestrial planet within the HZ was chosen for each system, from which the stability of orbits was then assessed by direct integrations over a time interval of 1 million years. For each of the five systems the 2-dimensional grid of initial conditions contained 80 eccentricity points for the Jovian planet and up to 160 semimajor axis points for the fictitious planet. The computations were carried out using a Lie-series integration method with an adaptive step size control. This integration method achieves machine precision accuracy in a highly efficient and robust way, requiring no special adjustments when the orbits have large eccentricities. The stability of orbits was examined with a determination of the Renyi entropy, estimated from recurrence plots, and with a more straightforward method based on the maximum eccentricity achieved by the planet over the 1 million year integration. Additionally, the eccentricity is an indication of the habitability of a terrestrial planet in the HZ; any value of e > 0.2 produces a significant temperature difference on a planet's surface between apoapse and periapse. The results for possible stable orbits for terrestrial planets in habitable zones for the five systems are: for Gl 777 A nearly the entire HZ is stable, for 47 Uma, HD 72659 and HD 4208 terrestrial planets can survive for a sufficiently long time, while for Gl 614 our results exclude terrestrial planets moving in stable orbits within the HZ. Studies such as this one are of primary interest to future space missions dedicated to finding habitable terrestrial planets in other stellar systems. Assessing the likelihood of other habitable planets, and more generally the possibility of other life, is the central question of astrobiology today. Our investigation indicates that, from the dynamical point of view, habitable terrestrial planets seem to be compatible with many of the currently discovered extrasolar systems
It has been found in recent measurements that the singlet-to-triplet exciton ratio in organic light-emitting diodes (OLEDs) is larger than expected from spin degeneracy, and that singlet excitons form at a larger rate than triplets. We employed the technique of optically detected magnetic resonance to measure the spin-dependent exciton formation rates in films of a polymer and corresponding monomer, and explore the relation between the formation rates and the actual singlet-to-triplet ratio measured previously in OLEDs. We found that the spin-dependent exciton formation rates can indeed quantitatively explain the observed exciton yields, and that singlet formation rates and yields are significantly enhanced only in polymer OLEDs, but not in OLEDs made from the corresponding monomer
Suppression of the keto-emission in polyfluorene light-emitting diodes : Experiments and models
(2004)
The spectral characteristics of polyfluorene (PF)-based light-emitting diodes (LEDs) containing a defined low concentration of either keto-defects or of the polymer poly(9.9-octylfuorene-co-benzothiadiazole) (F8BT) are preseneted. Both types of blend layers were tested in different device configurations with respect to the relative and absolute intensities of green blue emission components. It is shown that blending hole-transporting molecules into the emission layer at low concentration or incorporation of a suitable hole-transport layer reduces the green emission contribution in the electroluminescence (EL) spectrum of the PF:F8BT blend, which is similar to what is observed for the keto- containing PF layer. We conclude that the keto-defects in PF homopolymer layers mainly constitute weakly emissive electron traps, in agreement with the results of quantum-mechanical calculations
We study the behavior of time-periodic three-dimensional incompressible flows modelled by three-dimensional volume-preserving maps in the presence of a leakage. The distribution of residence times, and the chaotic saddle together with its stable and unstable invariant manifolds are described and characterized. They shed light. on typical filamentation of chaotic flows whose local stable and unstable manifolds are always of different, character (plane or line). We point out that leaking is a useful method which sheds light on typical filamentation of chaotic flows. In particular; the topology depends on the number of local expanding directions, and is the same in the leaked system as in the closed flow
Optical, structural and morphological properties of thin films of polyparaphenylenevinylene (PPV) formed by an alkyl sulfinyl precursor route have been studied. Thin films were fabricated on an optical glass and on quartz glass either by spin-coating of the precursor solution or by layer-by-layer deposition using Langmuir-Blodgett technique. PPV precursor films were also spin-coated on gold-coated glass in order to study thin-film optical parameters by surface plasmon spectroscopy. We have been successful in forming about 40 precursor mono layers on quartz glass by Langmuir- Blodgett technique using optimized surface pressure and dipping conditions. After thermal conversion of the precursor layers good quality fluorescent PPV films of yellow colour have been obtained. Optical characterization of the films was carried out by linear absorption and emission spectroscopy, ellipsometry, and surface plasmon spectroscopy. Structural and morphological studies on the thin films were carried out by using X-ray scattering and atomic force microscopy. Wave- guided travelling-wave laser action has been achieved in a PPV film on quartz glass. The sample was transversally pumped with picosecond laser pulses (wavelength 347.15 nm, duration 35 ps). Laser emission occurred at 550 nm for pump pulse energy densities above 1 x 10(-4) J cm(-2). (C) 2004 Elsevier B.V. All rights reserved
We suggest a method for suppression of synchrony in a globally coupled oscillator network, based on the time- delayed feedback via the mean field. Having in mind possible applications for suppression of pathological rhythms in neural ensembles, we present numerical results for different models of coupled bursting neurons. A theory is developed based on the consideration of the synchronization transition as a Hopf bifurcation
We investigate noise-controlled resonant response of active media to weak periodic forcing, both in excitable and oscillatory regimes. In the excitable regime, we find that noise-induced irregular wave structures can be reorganized into frequency-locked resonant patterns by weak signals with suitable frequencies. The resonance occurs due to a matching condition between the signal frequency and the noise-induced inherent time scale of the media. m:1 resonant regions similar to the Arnold tongues in frequency locking of self-sustained oscillatory media are observed. In the self-sustained oscillatory regime, noise also controls the oscillation frequency and reshapes significantly the Arnold tongues. The combination of noise and weak signal thus could provide an efficient tool to manipulate active extended systems in experiments
A statistical model describing the propensity for protein aggregation is presented. Only amino-acid hydrophobicity values and calculated net charge are used for the model. The combined effects of hydrophobic patterns as computed by the signal analysis technique, recurrence quantification, plus calculated net charge were included in a function emphasizing the effect of singular hydrophobic patches which were found to be statistically significant for predicting aggregation propensity as quantified by fluorescence studies obtained from the literature. These results suggest preliminary evidence for a mesoscopic principle for protein folding/aggregation. (C) 2004 Elsevier B.V. All rights reserved
We investigate the effects of rotation on the behavior of the helium-burning shell source in accreting carbon- oxygen white dwarfs, in the context of the single degenerate Chandrasekhar mass progenitor scenario for type la supernovae (SNe Ia). We model the evolution of helium-accreting white dwarfs of initially 1 M-circle dot, assuming four different constant accretion rates (2, 3, 5 and 10 x 10(-7) M-circle dot/yr). In a one-dimensional approximation, we compute the mass accretion and subsequent nuclear fusion of helium into carbon and oxygen, as well as angular momentum accretion, angular momentum transport inside the white dwarf, and rotationally induced chemical mixing. Our models show two major effects of rotation: a) The helium-burning nuclear shell source in the rotating models is much more stable than in corresponding non-rotating models - which increases the likelihood that accreting white dwarfs reach the stage of central carbon ignition. This effect is mainly due to rotationally induced mixing at the CO/He interface which widens the shell source, and due to the centrifugal force lowering the density and degeneracy at the shell source location. b) The C/O-ratio in the layers which experience helium shell burning - which may affect the energy of an SN Ia explosion - is strongly decreased by the rotationally induced mixing of a-particles into the carbon-rich layers. We discuss implications of our results for the evolution of SNe la progenitors
We demonstrate efficient single-layer polymer phosphorescent light-emitting devices based on a green-emitting iridium complex and a polymer host co-doped with electron-transporting and hole-transporting molecules. These devices can be operated at relatively low voltages, resulting in a power conversion efficiency of up to 24 lm/W at luminous efficiencies exceeding 30 cd/A. The overall performances of these devices suggest that efficient electrophosphorescent devices with acceptable operating voltages can be achieved in very simple device structures fabricated by spin coating. (C) 2004 American Institute of Physics
Various authors have investigated the problem of light deflection by radially moving gravitational lenses, but the results presented so far do not appear to agree on the expected deflection angles. Some publications claim a scaling of deflection angles with 1-v to first order in the radial lens velocity v, while others obtained a scaling with 1-2 v. In this paper we generalize the calculations for arbitrary lens velocities and show that the first result is the correct one. We discuss the seeming inconsistency of relativistic light deflection with the classical picture of moving test particles by generalizing the lens effect to test particles of arbitrary velocity, including light as a limiting case. We show that the effect of radial motion of the lens is very different for slowly moving test particles and light and that a critical test particle velocity exists for which the motion of the lens has no effect on the deflection angle to first order. An interesting and not immediately intuitive result is obtained in the limit of a highly relativistic motion of the lens towards the observer, where the deflection angle of light reduces to zero. This phenomenon is elucidated in terms of moving refractive media. Furthermore, we discuss the dragging of inertial frames in the field of a moving lens and the corresponding Lense-Thirring precession. in order to shed more light on the geometrical effects in the surroundings of a moving mass. In a second part we discuss the effect of transversal motion on the observed redshift of lensed sources. We demonstrate how a simple kinematic calculation explains the effects for arbitrary velocities of the lens and test particles. Additionally we include the transversal motion of the source and observer to show that all three velocities can be combined into an effective relative transversal velocity similar to the approach used in microlensing studies
B0218 + 357 is one of the most promising systems to determine the Hubble constant from time-delays in gravitational lenses. Consisting of two bright images, which are well resolved in very long baseline interferometry (VLBI) observations, plus one of the most richly structured Einstein rings, it potentially provides better constraints for the mass model than most other systems. The main problem left until now was the very poorly determined position of the lensing galaxy. After presenting detailed results from classical lens modelling, we apply our improved version of the LENSCLEAN algorithm which for the first time utilizes the beautiful Einstein ring for lens modelling purposes. The primary result using isothermal lens models is a now very well defined lens position of (255 +/- 6, 119 +/- 4) mas relative to the A image, which allows the first reliable measurement of the Hubble constant from the time-delay of this system. The result of H-0 = (78 +/- 6) km s(-1) Mpc(-1) (2sigma) is very high compared with other lenses. It is, however, compatible with local estimates from the Hubble Space Telescope (HST) key project and with WMAP results, but less prone to systematic errors. We furthermore discuss possible changes of these results for different radial mass profiles and find that the final values cannot be very different from the isothermal expectations. The power-law exponent of the potential is constrained by VLBI data of the compact images and the inner jet to be beta = 1.04 +/- 0.02, which confirms that the mass distribution is approximately isothermal (corresponding to beta = 1), but slightly shallower. The effect on H-0 is reduced from the expected 4 per cent decrease by an estimated shift of the best galaxy position of circa 4 mas to at most 2 per cent. Maps of the unlensed source plane produced from the best LENSCLEAN brightness model show a typical jet structure and allow us to identify the parts which are distorted by the lens to produce the radio ring. We also present a composite map which for the first time shows the rich structure of B0218 + 357 on scales ranging from mas to arcsec, both in the image plane and in the reconstructed source plane. Finally, we use a comparison of observations at different frequencies to investigate the question of possible weakening of one of the images by propagation effects and/or source shifts with frequency. The data clearly favour the model of significant 'extinction' without noticeable source position shifts. The technical details of our variant of the LENSCLEAN method are presented in the accompanying Paper I.
LensClean revisited
(2004)
We discuss the LENSCLEAN algorithm which for a given gravitational lens model fits a source brightness distribution to interferometric radio data in a similar way as standard CLEAN does in the unlensed case. The lens model parameters can then be varied in order to minimize the residuals and determine the best model for the lens mass distribution. Our variant of this method is improved in order to be useful and stable even for high dynamic range systems with nearly degenerated lens model parameters. Our test case B0218 + 357 is dominated by two bright images but the information needed to constrain the unknown parameters is provided only by the relatively smooth and weak Einstein ring. The new variant of LENSCLEAN is able to fit lens models even in this difficult case. In order to allow the use of general mass models with LENSCLEAN, we develop the new method LENTIL which inverts the lens equation much more reliably than any other method. This high reliability is essential for the use as part of LENSCLEAN. Finally a new method is developed to produce source plane maps of the unlensed source from the best LENSCLEAN brightness models. This method is based on the new concept of 'dirty beams' in the source plane. The application to the lens B0218 + 357 leads to the first useful constraints for the lens position and thus to a result for the Hubble constant. These results are presented in the accompanying Paper II, together with a discussion of classical lens modelling for this system
In cellular, electromechanically active polymer films, the so-called ferroelectrets, the cell size and shape distributions can be varied through a controlled inflation process. Up to now, high-pressure treatments were usually performed at elevated temperatures. There are, however, significant experimental limitations and complications if the pressure and temperature treatments are performed at the same time. Here, we demonstrate the controlled inflation of cellular polypropylene films by means of sepal-ate pressure and temperature treatments. Separate procedures are Much easier to implement. Excellent electromechanical properties were achieved with Such a two-step inflation process. The technique has significant potential for inflating large-area transducer films for electromechanical and electroacoustical applications
Piezo-, pyro- and ferroelectricity in poly (vinylidene fluoride-hexafluoropropylene) copolymer films
(2004)
Thin films of poly(vinylidene fluoride-hexafluoropropylene) P(VDF-HFP) show significant electroactive properties, such as piezoelectricity, pyroelectricity and electrostriction. Suitable polar P(VDF-HFP) copolymer films can be prepared by melt-pressing or solution-casting. Dipolar orientation causes the macroscopic polarization and thus also the symmetry breaking necessary for electroactive properties. We discuss the polarization build-up in thin, stretched and non-stretched, films of P(VDF-HFP) copolymer with a HFP content of 15%. Poling currents measured in-situ during electric poling are analyzed and the polarization is calculated. Suitable electric poling leads to hysteresis phenomena of the polarization as a function of the electric field as well as to significant polarization during switching experiments. Our results indicate dipolar orientation also in non-stretched P(VDF-HFP) films
We review the problem of estimating parameters and unobserved trajectory components from noisy time series measurements of continuous nonlinear dynamical systems. It is first shown that in parameter estimation techniques that do not take the measurement errors explicitly into account, like regression approaches, noisy measurements can produce inaccurate parameter estimates. Another problem is that for chaotic systems the cost functions that have to be minimized to estimate states and parameters are so complex that common optimization routines may fail. We show that the inclusion of information about the time-continuous nature of the underlying trajectories can improve parameter estimation considerably. Two approaches, which take into account both the errors-in-variables problem and the problem of complex cost functions, are described in detail: shooting approaches and recursive estimation techniques. Both are demonstrated on numerical examples
The quasar HE 0047-1756, at z = 1.67, is found to be split into two images 1."144 apart by an intervening galaxy acting as a gravitational lens. The flux ratio for the two components is roughly 3.5:1, depending slightly upon wavelength. The lensing galaxy is seen on images obtained in the i (800 nm) and K-s bands (2.1 mum); there is also a nearby faint object which may be responsible for some shear. The spectra of the two quasar images are nearly identical, but the emission line ratio between the two components scale differently from the continuum. Moreover, the fainter component has a bluer continuum slope than the brighter one. We argue that these small differences are probably due to microlensing. There is evidence for a partial Einstein ring emanating from the brighter image toward the fainter one