Refine
Has Fulltext
- yes (28) (remove)
Year of publication
- 2021 (28) (remove)
Document Type
- Doctoral Thesis (20)
- Postprint (8)
Is part of the Bibliography
- yes (28)
Keywords
- dye removal (2)
- methyl orange (2)
- methylene blue (2)
- organic chemistry (2)
- synthetic biology (2)
- thermoresponsiv (2)
- thermoresponsive (2)
- water treatment (2)
- 1-Arylnaphthalen-Lignane (1)
- 1-arylnaphthalene lignanes (1)
Institute
- Institut für Chemie (28) (remove)
The incorporation of proteins in artificial materials such as membranes offers great opportunities to avail oneself the miscellaneous qualities of proteins and enzymes perfected by nature over millions of years. One possibility to leverage proteins is the modification with artificial polymers. To obtain such protein-polymer conjugates, either a polymer can be grown from the protein surface (grafting-from) or a pre-synthesized polymer attached to the protein (grafting-to). Both techniques were used to synthesize conjugates of different proteins with thermo-responsive polymers in this thesis.
First, conjugates were analyzed by protein NMR spectroscopy. Typical characterization techniques for conjugates can verify the successful conjugation and give hints on the secondary structure of the protein. However, the 3-dimensional structure, being highly important for the protein function, cannot be probed by standard techniques. NMR spectroscopy is a unique method allowing to follow even small alterations in the protein structure. A mutant of the carbohydrate binding module 3b (CBM3bN126W) was used as model protein and functionalized with poly(N-isopropylacrylamide). Analysis of conjugates prepared by grafting-to or grafting-from revealed a strong impact of conjugation type on protein folding. Whereas conjugates prepared by grafting a pre-formed polymer to the protein resulted in complete preservation of protein folding, grafting the polymer from the protein surface led to (partial) disruption of the protein structure.
Next, conjugates of bovine serum albumin (BSA) as cheap and easily accessible protein were synthesized with PNIPAm and different oligoethylene glycol (meth)acrylates. The obtained protein-polymer conjugates were analyzed by an in-line combination of size exclusion chromatography and multi-angle laser light scattering (SEC-MALS). This technique is particular advantageous to determine molar masses, as no external calibration of the system is needed. Different SEC column materials and operation conditions were tested to evaluate the applicability of this system to determine absolute molar masses and hydrodynamic properties of heterogeneous conjugates prepared by grafting-from and grafting-to. Hydrophobic and non-covalent interactions of conjugates lead to error-prone values not in accordance to expected molar masses based on conversions and extents of modifications.
As alternative to this method, conjugates were analyzed by sedimentation velocity analytical ultracentrifugation (SV-AUC) to gain insights in the hydrodynamic properties and how they change after conjugation. Within a centrifugal field, a sample moves and fractionates according to the mass, density, and shape of its individual components. Conjugates of BSA with PNIPAm were analyzed below and above the cloud point temperature of the thermo-responsive polymer component. It was identified that the polymer characteristics were transferred to the conjugate molecule which than showed a decreased ideality – defined as increased deviation from a perfect sphere model – below and increased ideality above the cloud point temperature. This effect can be attributed to an arrangement of the polymer chain pointing towards the solvent (expanded state) or snuggling around the protein surface depending on the applied temperature.
The last project dealt with the synthesis of ferric hydroxamate uptake protein component A (FhuA)-polymer conjugates as building blocks for novel membrane materials. The shape of FhuA can be described as barrel and removal of a cork domain inside the protein results in a passive channel aimed to be utilized as pores in the membrane system. The polymer matrix surrounding the membrane protein is composed of a thermo-responsive and a UV-crosslinkable part. Therefore, an external trigger for covalent immobilization of these building blocks in the membrane and switchability of the membrane between different states was incorporated. The overall performance of membranes prepared by a drying-mediated self-assembly approach was evaluated by permeability and size exclusion experiments. The obtained membranes displayed an insufficiency in interchain crosslinking and therefore a lack in performance. Furthermore, the aimed switch between a hydrophilic and hydrophobic state of the polymer matrix did not occur. Correspondingly, size exclusion experiments did not result in a retention of analytes larger than the pores defined by the dimension of the used FhuA variant.
Overall, different paths to generate protein-polymer conjugates by either grafting-from or grafting-to the protein surface were presented paving the way to the generation of new hybrid materials. Different analytical methods were utilized to describe the folding and hydrodynamic properties of conjugates providing a deeper insight in the overall characteristics of these seminal building blocks.
Die vorliegende Dissertation behandelt drei thematische Schwerpunkte. Im Ergebnisteil steht die chemische Synthese von sogenannten (1,7)-Naphthalenophanen im Vordergrund, die zur Substanzklasse von Cyclophanen gehören. Während zahlreiche Synthesemethoden Strategien zum Aufbau von Ringsystemen (wie z. B. von Naphthalenophanen) verfolgen, die Teil einer bereits existierenden aromatischen Struktur der Ausgangsverbindung sind, nutzen nur wenige Ansätze Reaktionen, die einen Ringschluss zum gewünschten Produkt erst im Zuge der Synthese etablieren. Eine Benzanellierung, die eine besondere Aufmerksamkeit im Arbeitskreis erfahren hat, ist die Dehydro-DIELS-ALDER-Reaktion (DDA-Reaktion). Im Rahmen dieser Arbeit konnte gezeigt werden, dass zwölf ausgewählte (1,7)-Naphthalenophane, die teilweise ringgespannt und makrozyklisch aufgebaut waren, mithilfe einer photochemischen Variante der DDA-Reaktion (PDDA-Reaktion) zugänglich gemacht werden können. Die Versuche, auf thermischem Wege (TDDA-Reaktion) (1,7)-Naphthalenophane herzustellen, misslangen. Die außergewöhnliche Reaktivität der Photoreaktanten konnte mithilfe quantenchemischer Berechnungen durch eine gefaltete Grundzustandsgeometrie erklärt werden. Darüber hinaus wurden Ringspannungen und strukturelle Spannungsindikatoren der relevanten Photoprodukte ermittelt und Trends in Abhängigkeit der Linkerlänge in den NMR-Spektren der Zielverbindungen ermittelt sowie diskutiert. Zudem zeigte eine Variation am Chromophor (Acyl-, Carbonsäure- und Carbonsäureester) der Photoreaktanten bei der Bestrahlung in Dichlormethan eine vergleichbare Photokinetik und -reaktivität. Der zweite Abschnitt dieser Dissertation ist dem Design und der Entwicklung zweier Photoreaktoren für UV-Anwendungen im kontinuierlichen Durchfluss gewidmet, da photochemische Transformationen bekanntermaßen in ihrer Skalierbarkeit limitiert sind. Im ersten Prototyp konnten mittels effizienter Parallelschaltung mit bis zu drei UV-Lampen (𝜆𝜆 = 254, 310 und 355 nm) Produktmaterialmengen von bis zu n = 188 mmol anhand eines ausgewählten Fallbeispiels erreicht werden. Im konstruktionstechnisch stark vereinfachten zweiten Photoreaktor wurden alle quarzhaltigen Elemente gegen günstigeres PLEXIGLAS® ersetzt. Das Resultat waren identische Raum-Zeit-Ausbeuten in Bezug auf das zuvor gewählte Synthesebeispiel. Demnach bietet die UV-Photochemie im kontinuierlichen Durchfluss Vorteile gegenüber der traditionellen Bestrahlung im Tauchreaktor. Hinsichtlich Reaktionszeit, Produktausbeuten und Lösemittelverbrauch ist sie synthetisch weit überlegen. Im letzten Abschnitt der Arbeit wurden diese Erkenntnisse genutzt, um biomedizinisch und pharmakologisch vielversprechende 1-Arylnaphthalen-Lignane mittels einer intramolekularen PDDA-Reaktion (IMPDDA-Reaktion) als Schlüsselschritt herzustellen. Hierzu wurden drei Konzepte erarbeitet und in der Totalsynthese von drei ausgewählten Zielstrukturen auf Basis des 1-Arylnaphthalengrundgerüsts realisiert.
Die vorliegende Arbeit thematisiert die Synthese und Charakterisierung von neuen funktionalisierten ionischen Flüssigkeiten und deren Polymerisation. Die ionischen Flüssigkeiten wurden dabei sowohl mit polymerisierbaren Kationen als auch Anionen hergestellt. Zum einen wurden bei thermisch initiierten Polymerisationen Azobis(isobutyronitril) (AIBN) verwendet und zum anderen dienten bei photochemisch initiierten Polymerisationen Bis-4-(methoxybenzoyl)diethylgermanium (Ivocerin®) als Radikalstarter.
Mittels Gelpermeationschromatographie konnte das Homopolymer Polydimethylaminoethylmethacrylat untersucht werden, welches erst im Anschluss an die GPC-Messungen polymeranalog modifiziert wurde. Dabei wurden nach einer Quaternisierung und anschließender Anionenmetathese bei diesen Polymeren die Grenzviskositäten bestimmt und mit den Grenzviskositäten der direkt polymerisierten ionischen Flüssigkeiten verglichen. Bei der direkten Polymerisation von Poly(N-[2-(Methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammoniumbis(trifluormethylsulfonyl)imid) lag [η_Huggins] bei 100 mL/g und bei dem polymeranalog hergestellten Polymer betrug [η_Huggins] = 40 mL/g.
Die ionischen Flüssigkeiten mit polymerisierbaren funktionellen Gruppen wurden mittels Photo-DSC hinsichtlich der maximalen Polymerisationsgeschwindigkeit (Rpmax), der Zeit, in der dieses Maximum erreicht wurde, tmax, ihrer Glasüberganstemperatur (Tg) und des Umsatzes an Vinylprotonen untersucht. Bei diesen Messungen wurde zum einen der Einfluss der unterschiedlichen Alkylkettenlänge am Ammoniumion und der Einfluss von verschiedenen Anionen bei gleichbleibender Kationenstruktur analysiert. So polymerisierte das ethylsubstituierte Kation mit einer tmax von 21 Sekunden am langsamsten. Die maximale Polymerisationsgeschwindigkeit (Rpmax) betrug 3.3∙10-2 s-1. Die tmax Werte der übrigen alkylsubstituierten ionischen Flüssigkeiten mit einer polymerisierbaren funktionellen Gruppe hingegen lagen zwischen 10 und 15 Sekunden. Die Glasübergangstemperaturen der mittels photoinduzierter Polymerisation hergestellten Polymere lagen mit 44 bis 55 °C nahe beieinander. Alle Monomere zeigten einen hohen Umsatz der Vinylprotonen; er betrug zwischen 93 und 100%.
Mithilfe einer Bandanlage, ausgerüstet mit einer LED (λ = 395 nm), konnten Polymerfilme hergestellt werden. Der Umsatz an Doppelbindungsäquivalenten dieser Filme wurde anhand der 1H-NMR Spektroskopie bestimmt. Bei der dynamisch-mechanischen Analyse wurden die Polymerfilme mit einer konstanten Heizrate und Frequenz periodisch wechselnden Beanspruchungen ausgesetzt, um die Glasübergangstemperaturen zu bestimmen. Die niedrigste Tg mit 26 °C besaß das butylsubstituierte N-[2-(Methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammoniumbis(trifluormethylsulfonyl)imid, welches als Polymerfilm mit Ivocerin® als Initiator hergestellt wurde, wohingegen die höchste Tg bei dem gleichen Polymer, welches direkt durch freie radikalische Polymerisation der ionischen Flüssigkeit in Masse mit AIBN hergestellt wurde, 51 °C betrug. Zusätzlich wurden die Filme unter dem Aspekt der Topographie mit einem Rasterkraftmikroskop untersucht, welches eine Domänenstruktur des Polymers N-[2-(methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammonium tris(pentafluorethyl)trifluorphosphat offenbarte.
Zusammenfassung zur Dissertation „Neuartige DBD-Fluoreszenzfarbstoffe: Synthese, Untersuchungen und Anwendungen“ von Leonard John
In dieser Arbeit konnten auf Basis der etablierten [1,3]-Dioxolo[4,5-f][1,3]benzodioxol (DBD) Fluoreszenzfarbstoffe zwei neue Konzepte zur Darstellung unsymmetrisch funktionalisierter DBD-Fluorophore entwickelt werden. Die Variation der elektronenziehenden Reste führte zu einer Erweiterung des Farbspektrums an DBD-Fluorophoren, wobei alle weiteren spektroskopischen Parameter (Fluoreszenzlebenszeit, -quantenausbeute und STOKES-Verschiebung) unverändert hohe Werte aufweisen. Neben der Variation der elektronenziehenden Reste wurde das "pi"-System des DBD-Farbstoffs mit der Einführung von Stilben-, und Tolan-Derivaten vergrößert. Stilben-Derivate zeigten ähnlich gute spektroskopische Eigenschaften wie die bereits etablierten DBD-Farbstoffe.
Fluorophore mit langwelliger Emission sind auf Grund der großen Gewebe-Eindringtiefe besonders interessant für biologische Anwendungen. Da der langwelligste Vertreter der O4-DBD-Farbstoffe in polaren Medien nur schwer löslich ist, wurde ein Weg zur Einführung löslichkeitsvermittelnder Gruppen gesucht. Hierbei fiel die Wahl auf eine Carbonsäure-Gruppe zur Steigerung der Hydrophilie. Eine von vier untersuchten Methoden erwies sich als zielführend, sodass das gewünschte Molekül isoliert werden konnte. Eine erhöhte Wasserlöslichkeit wurde allerdings nicht beobachtet.
Zur Erforschung von Fettstoffwechselkrankheiten wie der ALZHEIMER-Krankheit werden fluoreszenzmarkierte Lipide benötigt. Um unterschiedliche Bereiche einer Membran zu untersuchen, war das Ziel, den Fluorophor an unterschiedlichen Stellen innerhalb der Fettsäure zu lokalisieren. Hierbei sollte die Gesamtkettenlänge des DBD-Lipids einer C18-Kette, analog der Stearinsäure, entsprechen. Durch die stufenweise Einführung der Reste gelang es, drei DBD-Lipide herzustellen, wobei sich der Fluorophor an unterschiedlichen Positionen innerhalb der Kette befindet. Die photophysikalischen Eigenschaften der Lipide weichen nur marginal von denen der reinen Fluorophore ab. Eine Einlagerung in giant unilamellar vesicles (GUVs) konnte für zwei Derivate beobachtet werden, wobei keine domänenspezifisch war.
Ein weiteres Ziel dieser Arbeit war es, die vier Sauerstoffatome im DBD-Grundkörper stufenweise durch Schwefelatome zu ersetzen und die Ringgrößen des DBD-Fluorophors zu variieren. Für die Ringgröße zeigte der 1,2-S2-DBD mit jeweils zwei Fünfringen die besten spektroskopischen Eigenschaften. Durch die Synthese von zwei weiteren schwefelhaltigen DBD-Grundkörpern (S1- und 1,4-S2-DBD) konnten insgesamt drei neue Farbstoffklassen zugänglich gemacht werden. Für alle neuen Chromophore wurden elektronenziehende Reste (Aldehyd, Acyl, Ester, Carboxy) eingeführt und die jeweiligen Derivate spektroskopisch untersucht. Mit steigender Anzahl an Schwefel-Atomen im Grundkörper zeigt sich eine bathochrome Verschiebung der Emission,
wobei die Werte für die Fluoreszenzlebenszeit- und -quantenausbeute abnehmen. Die optimalen spektroskopischen Eigenschaften aus langwelliger Emission, hoher Fluoreszenzlebenszeit und -quantenausbeute zeigt das 1,4-S2-Dialdehyd-Derivat. Für die S1- und 1,2-S2-Dialdehyd-
Derivate wurden Konzepte entwickelt, um bioreaktive Reste (Alkin, HOSu, Maleimid) einzuführen und die Fluorophore in biologischen Systemen anwenden zu können.
Stereoselective [4+2] Cycloaddition of Singlet Oxygen to Naphthalenes Controlled by Carbohydrates
(2021)
Stereoselective reactions of singlet oxygen are of current interest. Since enantioselective photooxygenations have not been realized efficiently, auxiliary control is an attractive alternative. However, the obtained peroxides are often too labile for isolation or further transformations into enantiomerically pure products. Herein, we describe the oxidation of naphthalenes by singlet oxygen, where the face selectivity is controlled by carbohydrates for the first time. The synthesis of the precursors is easily achieved starting from naphthoquinone and a protected glucose derivative in only two steps. Photooxygenations proceed smoothly at low temperature, and we detected the corresponding endoperoxides as sole products by NMR. They are labile and can thermally react back to the parent naphthalenes and singlet oxygen. However, we could isolate and characterize two enantiomerically pure peroxides, which are sufficiently stable at room temperature. An interesting influence of substituents on the stereoselectivities of the photooxygenations has been found, ranging from 51:49 to up to 91:9 dr (diastereomeric ratio). We explain this by a hindered rotation of the carbohydrate substituents, substantiated by a combination of NOESY measurements and theoretical calculations. Finally, we could transfer the chiral information from a pure endoperoxide to an epoxide, which was isolated after cleavage of the sugar chiral auxiliary in enantiomerically pure form.
Natural products have proved to be a major resource in the discovery and development of many pharmaceuticals that are in use today. There is a wide variety of biologically active natural products that contain conjugated polyenes or benzofuran structures. Therefore, new synthetic methods for the construction of such building blocks are of great interest to synthetic chemists. The recently developed one-pot tethered ring-closing metathesis approach allows for the formation of Z,E-dienoates in high stereoselectivity. The extension of this method with a Julia-Kocienski olefination protocol would allow for the formation of conjugated trienes in a stereoselective manner. This strategy was applied in the total synthesis of conjugated triene containing (+)-bretonin B. Additionally, investigations of cross metathesis using methyl substituted olefins were pursued. This methodology was applied, as a one-pot cross metathesis/ring-closing metathesis sequence, in the total synthesis of benzofuran containing 7-methoxywutaifuranal. Finally, the design and synthesis of a catalyst for stereoretentive metathesis in aqueous media was investigated.
Janus droplets were prepared by vortex mixing of three non-mixable liquids, i.e., olive oil, silicone oil and water, in the presence of gold nanoparticles (AuNPs) in the aqueous phase and magnetite nanoparticles (MNPs) in the olive oil. The resulting Pickering emulsions were stabilized by a red-colored AuNP layer at the olive oil/water interface and MNPs at the oil/oil interface. The core–shell droplets can be stimulated by an external magnetic field. Surprisingly, an inner rotation of the silicon droplet is observed when MNPs are fixed at the inner silicon droplet interface. This is the first example of a controlled movement of the inner parts of complex double emulsions by magnetic manipulation via interfacially confined magnetic nanoparticles.
The numerous applications of rare earth elements (REE) has lead to a growing global demand and to the search for new REE deposits. One promising technique for exploration of these deposits is laser-induced breakdown spectroscopy (LIBS). Among a number of advantages of the technique is the possibility to perform on-site measurements without sample preparation. Since the exploration of a deposit is based on the analysis of various geological compartments of the surrounding area, REE-bearing rock and soil samples were analyzed in this work. The field samples are from three European REE deposits in Sweden and Norway. The focus is on the REE cerium, lanthanum, neodymium and yttrium. Two different approaches of data analysis were used for the evaluation. The first approach is univariate regression (UVR). While this approach was successful for the analysis of synthetic REE samples, the quantitative analysis of field samples from different sites was influenced by matrix effects. Principal component analysis (PCA) can be used to determine the origin of the samples from the three deposits. The second approach is based on multivariate regression methods, in particular interval PLS (iPLS) regression. In comparison to UVR, this method is better suited for the determination of REE contents in heterogeneous field samples. View Full-Text
The present work focuses on minimising the usage of toxic chemicals by integration of the biobased monomers, derived from fatty acid esters, to photopolymerization processes, which are known to be nature friendly. Internal double bond present in the oleic acid was converted to more reactive (meth)acrylate or epoxy group. Biobased starting materials, functionalized by different pendant groups, were used for photopolymerizing formulations to design of new polymeric structures by using ultraviolet light emitting diode (UV-LED) (395 nm) via free radical polymerization or cationic polymerization.
New (meth)acrylates (2,3 and 4) consisting of two isomers, methyl 9-((meth)acryloyloxy)-10-hydroxyoctadecanoate / methyl 9-hydroxy-10-((meth)acryloyloxy)octadecanoate (2 and 3) and methyl 9-(1H-imidazol-1-yl)-10-(methacryloyloxy)octadecanoate / methyl 9-(methacryloyloxy)-10-(1H-imidazol-1-yl)octadecanoate (4), modified from oleic acid mix, and ionic liquid monomers (1a and 1b) bearing long alkyl chain were polymerized photochemically. New (meth)acrylates are based on vegetable oil, and ionic liquids (ILs) have nonvolatile behaviour. Therefore, both monomer types have green approach. Photoinitiated polymerization of new (meth)acrylates and ionic liquids was investigated in the presence of ethyl (2,4,6-trimethylbenzoyl) phenylphosphinate (Irgacure® TPO−L) or di(4-methoxybenzoyl)diethylgermane (Ivocerin®) as photoinitiator (PI). Additionally, the results were discussed in comparison with those obtained from commercial 1,6-hexanediol di(meth)acrylate (5 and 6) for deeper investigation of biobased monomer’s potential to substitute petroleum derived materials with renewable resources for possible coating applications. Kinetic study shows that methyl 9-(1H-imidazol-1-yl)-10-(methacryloyloxy)octadecanoate / methyl 9-(methacryloyloxy)-10-(1H-imidazol-1-yl)octadecanoate (4) and ionic liquids (1a and 1b) have quantitative conversion after irradiation process which is important for practical applications. On the other hand, heat generation occurs in a longer time during the polymerization of biobased systems or ILs.
The poly(meth)acrylates modified from (meth)acrylated fatty acid methyl ester monomers generally show a low glass transition temperature because of the presence of long aliphatic chain in the polymer structure. However, poly(meth)acrylates containing aromatic group have higher glass transition temperature. Therefore, new 4-(4-methacryloyloxyphenyl)-butan-2-one (7) was synthesized which can be a promising candidate for the green techniques, such as light induced polymerization. Photokinetic investigation of the new monomer, 4-(4-methacryloyloxyphenyl)-butan-2-one (7), was discussed using Irgacure® TPO−L or Ivocerin® as photoinitiator. The reactivity of that monomer was compared to commercial 2-phenoxyethyl methacrylate (8) and phenyl methacrylate (9) basis of the differences on monomer structures. The photopolymer of 4-(4-methacryloyloxyphenyl)-butan-2-one (7) might be an interesting candidate for the coating application with the properties of quantitative conversion and high molecular weight. It also shows higher glass transition temperature.
In addition to the linear systems based on renewable materials, new crosslinked polymers were also designed in this thesis. Therefore, isomer mixture consisting of ethane-1,2-diyl bis(9-methacryloyloxy-10-hydroxy octadecanoate), ethane-1,2-diyl 9-hydroxy-10-methacryloyloxy-9’-methacryloyloxy10’-hydroxy octadecanoate and ethane-1,2-diyl bis(9-hydroxy-10-methacryloyloxy octadecanoate) (10) was synthesized by derivation of the oleic acid which has not been previously described in the literature. Crosslinked material based on this biobased monomer was produced by photoinitiated free radical polymerization using Irgacure® TPO−L or Ivocerin® as photoinitiator. Furthermore, material properties were diversified by copolymerization of 10 with 4-(4-methacryloyloxyphenyl)-butan-2-one (7) or methyl 9-(1H-imidazol-1-yl)-10-(methacryloyloxy)octadecanoate / methyl 9-(methacryloyloxy)-10-(1H-imidazol-1-yl)octadecanoate (4). In addition to this, influence of comonomer with different chemical structure on the network system was investigated by analysis of thermo-mechanical properties, crosslink density and molecular weight between two crosslink junctions. An increase in the glass transition temperature caused by copolymerization of biobased monomer 10 with the excess amount of 4-(4-methacryloyloxyphenyl)-butan-2-one (7) was confirmed by both techniques, differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). On the other hand, crosslink density decreased as a result of copolymerization reactions due to the reduction in the mean functionality of the system. Furthermore, surface characterization has been tested by contact angle measurements using solvents with different polarity.
This work also contributes to the limited data reported about cationic photopolymerization of the epoxidized vegetable oils in the literature in contrast to the widely investigation of thermal curing of the biorenewable epoxy monomers. In addition to the 9,10-epoxystearic acid methyl ester (11), a new monomer of bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) has been synthesized from oleic acid. These two biobased epoxies have been polymerized via cationic photoinitiated polymerization in the presence of bis(t-butyl)-iodonium-tetrakis(perfluoro-t-butoxy)aluminate ([Al(O-t-C4F9)4]-) and isopropylthioxanthone (ITX) as photinitiating system. Polymerization kinetic of 9,10-epoxystearic acid methyl ester (11) and bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) was investigated and compared with the kinetic of commercial monomers being 3,4-epoxycyclohexylmethyl-3’,4’-epoxycyclohexane carboxylate (13), 1,4-butanediol diglycidyl ether (14), and diglycidylether of bisphenol-A (15). Both biobased epoxies (11 and 12) showed higher conversion than cycloaliphatic epoxy (13), and lower reactivity than 1,4-butanediol diglycidyl ether (14). Additional network systems were designed by copolymerization of bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) and diglycidylether of bisphenol-A (15) in different molar ratios (1:1; 1:5; 1:9). It addresses that, final conversion is dependent on polymerization rate as well as physical processes such as vitrification during polymerization. Moreover, low glass transition temperature of homopolymer derived from bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) was successfully increased by copolymerization with diglycidylether bisphenol-A (15). On the other hand, the surface produced from bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) shows hydrophobic character. Higher concentration of biobased diepoxy (12) in the copolymerizing mixture decreases surface free energy. Network systems were also investigated according to the rubber elasticity theory. Crosslinked polymer derived from the mixture of bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) and diglycidylether of bisphenol-A (15) (molar ratio=1:5) exhibits almost ideal polymer network.
The optical properties of chromophores, especially organic dyes and optically active inorganic molecules, are determined by their chemical structures, surrounding media, and excited state behaviors. The classical optical go-to techniques for spectroscopic investigations are absorption and luminescence spectroscopy. While both techniques are powerful and easy to apply spectroscopic methods, the limited time resolution of luminescence spectroscopy and its reliance on luminescent properties can make its application, in certain cases, complex, or even impossible. This can be the case when the investigated molecules do not luminesce anymore due to quenching effects, or when they were never luminescent in the first place. In those cases, transient absorption spectroscopy is an excellent and much more sophisticated technique to investigate such systems. This pump-probe laser-spectroscopic method is excellent for mechanistic investigations of luminescence quenching phenomena and photoreactions. This is due to its extremely high time resolution in the femto- and picosecond ranges, where many intermediate or transient species of a reaction can be identified and their kinetic evolution can be observed. Furthermore, it does not rely on the samples being luminescent, due to the active sample probing after excitation. In this work it is shown, that with transient absorption spectroscopy it was possible to identify the luminescence quenching mechanisms and thus luminescence quantum yield losses of the organic dye classes O4-DBD, S4-DBD, and pyridylanthracenes. Hence, the population of their triplet states could be identified as the competitive mechanism to their luminescence. While the good luminophores O4-DBD showed minor losses, the S4-DBD dye luminescence was almost entirely quenched by this process. However, for pyridylanthracenes, this phenomenon is present in both the protonated and unprotonated forms and moderately effects the luminescence quantum yield. Also, the majority of the quenching losses in the protonated forms are caused by additional non-radiative processes introduced by the protonation of the pyridyl rings. Furthermore, transient absorption spectroscopy can be applied to investigate the quenching mechanisms of uranyl(VI) luminescence by chloride and bromide. The reduction of the halides by excited uranyl(VI) leads to the formation of dihalide radicals X^(·−2). This excited state redox process is thus identified as the quenching mechanism for both halides, and this process, being diffusion-limited, can be suppressed by cryogenically freezing the samples or by observing these interactions in media with a lower dielectric constant, such as ACN and acetone.