Refine
Year of publication
- 2021 (28) (remove)
Document Type
- Doctoral Thesis (28) (remove)
Language
- English (28) (remove)
Is part of the Bibliography
- yes (28)
Keywords
- Agrarökologie (2)
- Arabidopsis thaliana (2)
- Cyanobakterien (2)
- Influenza (2)
- Nahrungsnetze (2)
- Photosynthese (2)
- atomic force microscopy (2)
- cell wall (2)
- 13CO2 labeling (1)
- 2-oxoglutarat / FeII- abhängige Dioxygenases (1)
Institute
- Institut für Biochemie und Biologie (28) (remove)
Water-deficits can cause lethal damage to organisms, which is rooted in cellular dehydration. Many plant species, but also other organisms have developed mechanisms to tolerate such stresses, such as the expression of LEA proteins. Many studies report on physiological protective functions of LEA proteins but lack information about their precise mechanisms on a molecular level. Most LEA proteins are intrinsically disordered in dilute solution but may adopt a distinct secondary structure upon changes in solvent conditions. Understanding the molecular mechanism of how LEA proteins contribute to the counteraction of cellular damage during water-deficits may in the long-term pave the way for breeding crops that are resistant to the effects of global warming. The objective of the work at hand is to improve the biophysical understanding of the sequencestructure-function relationship of LEA proteins as membrane stabilizers, based on the LEA_4 family of the model plant A. thaliana. This is pursued by using a combination of spectroscopic and scattering techniques, supported by bioinformatics and computational analyses. Eight out of the 18 LEA_4 proteins are experimentally assessed revealing that a coil-helix transition in response to water-deficit is a common feature, as predicted for the entire family. In addition, they all stabilize simple membrane models during a freeze/ thaw cycle. Three-dimensional structure prediction of representative members suggests that their completely folded states are represented by a sequential arrangement of alpha-helical segments connected by unstructured linkers, which is experimentally verified for the LEA_4 protein COR15A. The unstructured linker region of COR15A represents a conserved motif among its closest homologs and is, therefore, of particular interest. Facilitating a set of seven designed and investigated COR15A mutants uncovers a complex interplay of transient interactions between the amphipathic alpha-helical segments, mediated by the linker, which fine-tunes folding transitions and structural ensembles upon reduced water-availability. Finally, alpha-helicity is also induced in COR15A upon temperature decrease, which is enhanced in the presence of osmolytes. In addition, high solution osmolarity induced secondary structure is followed by oligomerization of COR15A. Interestingly, the functionality of COR15A, in terms of liposome stabilization, strongly correlates with its alpha-helix ratio in the folded state. The present work significantly improves the understanding of the sequence-structure-function relationship for LEA_4 proteins and offers novel findings on folding mechanisms and oligomerization of COR15A.
The prevalence of diseases associated with misfolded proteins increases with age. When cellular defense mechanisms become limited, misfolded proteins form aggregates and may also develop more stable cross-β structures ultimately forming amyloid aggregates. Amyloid aggregates are associated with neurodegenerative diseases such as Alzheimer’s disease and Huntington’s disease. The formation of amyloid deposits, their toxicity and cellular defense mechanisms have been intensively studied. However, surprisingly little is known about the effects of protein aggregates on cellular signal transduction. It is also not understood whether the presence of aggregation-prone, but still soluble proteins affect signal transduction.
In this study, the still soluble aggregation-prone HttExon1Q74 and its amyloid aggregates were used to analyze the effect of amyloid aggregates on internalization and receptor activation of G protein-coupled receptors (GPCRs), the largest protein family of mammalian cell surface receptors involved in signal transduction. The aggregated HttExon1Q74, but not its soluble form, could inhibit ligand-induced clathrin-mediated endocytosis (CME) of various GPCRs. Most likely this inhibitory effect is based on a terminal sequestration of the HSC70 chaperone to the aggregates which is necessary for CME. Using the vasopressinV1a receptor (V1aR) and the corticotropin-releasing factor receptor 1 (CRF1R) as a model, it could be shown that the presence of HttExon1Q74 aggregates and the inhibition of ligand-induced CME leads to an accumulation of desensitized receptors at the plasma membrane. In turn, this disrupts Gq-mediated Ca2+ signaling and Gs-mediated cAMP signaling of the V1aR and the CRF1R respectively. In contrast to HttExon1Q74 amyloid aggregates, soluble HttExon1Q74 as well as amorphous aggregates did not inhibit GPCR internalization and signaling demonstrating that cellular signal transduction mechanisms are specifically impaired in response to the formation of amyloid aggregates.
In addition, preliminary experiments could show that HttExon1Q74 aggregates provoke an increase in membrane expression of a protein from a structurally and functionally unrelated membrane protein family, namely the serotonin transporter SERT. As SERT is the main pharmacological target to treat depression this could shed light on this commonly occurring comorbidity in neurodegenerative diseases, in particular in early disease states.
Due to global climate change providing food security for an increasing world population is a big challenge. Especially abiotic stressors have a strong negative effect on crop yield. To develop climate-adapted crops a comprehensive understanding of molecular alterations in the response of varying levels of environmental stresses is required. High throughput or ‘omics’ technologies can help to identify key-regulators and pathways of abiotic stress responses. In addition to obtain omics data also tools and statistical analyses need to be designed and evaluated to get reliable biological results.
To address these issues, I have conducted three different studies covering two omics technologies. In the first study, I used transcriptomic data from the two polymorphic Arabidopsis thaliana accessions, namely Col-0 and N14, to evaluate seven computational tools for their ability to map and quantify Illumina single-end reads. Between 92% and 99% of the reads were mapped against the reference sequence. The raw count distributions obtained from the different tools were highly correlated. Performing a differential gene expression analysis between plants exposed to 20 °C or 4°C (cold acclimation), a large pairwise overlap between the mappers was obtained. In the second study, I obtained transcript data from ten different Oryza sativa (rice) cultivars by PacBio Isoform sequencing that can capture full-length transcripts. De novo reference transcriptomes were reconstructed resulting in 38,900 to 54,500 high-quality isoforms per cultivar. Isoforms were collapsed to reduce sequence redundancy and evaluated, e.g. for protein completeness level (BUSCO), transcript length, and number of unique transcripts per gene loci. For the heat and drought tolerant aus cultivar N22, I identified around 650 unique and novel transcripts of which 56 were significantly differentially expressed in developing seeds during combined drought and heat stress. In the last study, I measured and analyzed the changes in metabolite profiles of eight rice cultivars exposed to high night temperature (HNT) stress and grown during the dry and wet season on the field in the Philippines. Season-specific changes in metabolite levels, as well as for agronomic parameters, were identified and metabolic pathways causing a yield decline at HNT conditions suggested.
In conclusion, the comparison of mapper performances can help plant scientists to decide on the right tool for their data. The de novo reconstruction of rice cultivars without a genome sequence provides a targeted, cost-efficient approach to identify novel genes responding to stress conditions for any organism. With the metabolomics approach for HNT stress in rice, I identified stress and season-specific metabolites which might be used as molecular markers for crop improvement in the future.
Bottom-up synthetic biology is used for the understanding of how a cell works. It is achieved through developing techniques to produce lipid-based vesicular structures as cellular mimics. The most common techniques used to produce cellular mimics or synthetic cells is through electroformation and swelling method. However, the abovementioned techniques cannot efficiently encapsulate macromolecules such as proteins, enzymes, DNA and even liposomes as synthetic organelles. This urges the need to develop new techniques that can circumvent this issue and make the artificial cell a reality where it is possible to imitate a eukaryotic cell through encapsulating macromolecules. In this thesis, the aim to construct a cell system using giant unilamellar vesicles (GUVs) to reconstitute the mitochondrial molybdenum cofactor biosynthetic pathway. This pathway is highly conserved among all life forms, and therefore is known for its biological significance in disorders induced through its malfunctioning. Furthermore, the pathway itself is a multi-step enzymatic reaction that takes place in different compartments. Initially, GTP in the mitochondrial matrix is converted to cPMP in the presence of cPMP synthase. Further, produced cPMP is transported across the membrane to the cytosol, to be converted by MPT synthase into MPT. This pathway provides a possibility to address the general challenges faced in the development of a synthetic cell, to encapsulate large biomolecules with good efficiency and greater control and to evaluate the enzymatic reactions involved in the process.
For this purpose, the emulsion-based technique was developed and optimised to allow rapid production of GUVs (~18 min) with high encapsulation efficiency (80%). This was made possible by optimizing various parameters such as density, type of oil, the impact of centrifugation speed/time, lipid concentration, pH, temperature, and emulsion droplet volume. Furthermore, the method was optimised in microtiter plates for direct experimentation and visualization after the GUV formation. Using this technique, the two steps - formation of cPMP from GTP and the formation of MPT from cPMP were encapsulated in different sets of GUVs to mimic the two compartments. Two independent fluorescence-based detection systems were established to confirm the successful encapsulation and conversion of the reactants. Alternatively, the enzymes produced using bacterial expression and measured. Following the successful encapsulation and evaluation of enzymatic reactions, cPMP transport across mitochondrial membrane has been mimicked using GUVs using a complex mitochondrial lipid composition. It was found that the cPMP interaction with the lipid bilayer results in transient pore-formation and leakage of internal contents.
Overall, it can be concluded that in this thesis a novel technique has been optimised for fast production of functional synthetic cells. The individual enzymatic steps of the Moco biosynthetic pathway have successfully implemented and quantified within these cellular mimics.
There is a general consensus that diverse ecological communities are better equipped to adapt to changes in their environment, but our understanding of the mechanisms by which they do so remains incomplete. Accurately predicting how the global biodiversity crisis affects the functioning of ecosystems, and the services they provide, requires extensive knowledge about these mechanisms.
Mathematical models of food webs have been successful in uncovering many aspects of the link between diversity and ecosystem functioning in small food web modules, containing at most two adaptive trophic levels. Meaningful extrapolation of this understanding to the functioning of natural food webs remains difficult, due to the presence of complex interactions that are not always accurately captured by bitrophic descriptions of food webs. In this dissertation, we expand this approach to tritrophic food web models by including the third trophic level. Using a functional trait approach, coexistence of all species is ensured using fitness-balancing trade-offs. For example, the defense-growth trade-off implies that species may be defended against predation, but this defense comes at the cost of a lower maximal growth rate. In these food webs, the functional diversity on a given trophic level can be varied by modifying the trait differences between the species on that level.
In the first project, we find that functional diversity promotes high biomass on the top level, which, in turn, leads to a reduction in the temporal variability due to compensatory dynamical patterns governed by the top level. Next, these results are generalized by investigating the average behavior of tritrophic food webs, for wide intervals of all parameters describing species interactions in the food web. We find that the diversity on the top level is most important for determining the biomass and temporal variability of all other trophic levels, and show how biomass is only transferred efficiently to the top level when diversity is high everywhere in the food web. In the third project, we compare the response of a simple food chain against a nutrient pulse perturbation, to that of a food web with diversity on every trophic level. By joint consideration of the resistance, resilience, and elasticity, we uncover that the response is efficiently buffered when biomass on the top level is high, which is facilitated by functional diversity on every trophic level in the food web. Finally, in the fourth project, we show that even in a simple consumer-resource model without any diversity, top-down control on the intermediate level frequently causes the phase difference between the intermediate and basal level to deviate from the quarter-cycle lag rule. By adding a top predator, we show that these deviations become even more likely, and anti-phase cycles are often observed.
The combined results of these projects show how the properties of the top trophic level, including its functional diversity, have a decisive influence on the functioning of tritrophic food webs from a mechanistic perspective. Because top species are often among the most vulnerable to extinction, our results emphasize the importance of their conservation in ecosystem management and restoration strategies.
As the ongoing trend of developing smart materials that can reversibly switch geometry stimulated by environmental control addressed increasing attention in many research fields, especially for biomedical or soft robotic applications. Shape-memory polymers (SMPs), which can change shape, stiffness, size, and structure when exposed to an external stimulus, are intensively explored as encouraging material candidates for achieving multifunctionality, and for miniaturizing into micro-components to expand the applications. Besides, the geometrical design has gained growing attention for creating engineering applications, such as bi-stable mechanisms, and has the potential to be explored by implementing SMP for new functions. In this context, this thesis aimed to develop smart micro-/nano-objects based on SMP and explore new functions by geometrical design using SMP. Here, two types of stimuli-responsive objects capable of one-way temperature-memory effect (TME) or free-standing reversible actuation e.g., micro/nanofibers (i) and microcuboids (ii) at different aspects were explored. At first, it was hypothesized that the advanced atomic force microscopy (AFM) platform can be established to study individual polymeric micro-/nanofibers (i) in terms of incorporation and characterization of a reversible shape-memory actuation capability. Crystallizable material was chosen for preparing the fibers and the molecular alignment within the fibers among different diameters will influence the crystallization-induced elongation during cooling that determined the reversible effect. For the second type, microcuboids (ii), it was hypothesized that a programming and quantification approach can be developed to enable the realization and characterization of a one-way micro-TME and micro-shape-memory polymer actuation (SMPA) in microcuboids. The responsive temperature of one-way shape transformation can be tuned by programming temperature (Tp) and the separation temperature (Tsep) for post-programming can influence the actuation. Finally, a geometrical design with bi-stability was combined with SME to create new functions of shape actuation. It was hypothesized that the predicted bi-stable or mono-stable structures can be achieved with the aid of digital fabrication methods. Using shape-memory effect (SME), the alteration of bi-stable and mono-stable can initiate shape transformation with a larger magnitude and higher energy output.
In the first part, the method to quantify the reversible SMPA of a single micro/nano crystallizable fiber with geometry change during the actuation was explored. Electrospinning was used to prepare poly (ε-caprolactone) (PCL) micro/nanofiber with different diameters, which were fixed by UV glue and crosslinked on the structured silicon wafer. Using AFM, the programming, as well as the observation of recovery and reversible displacement of the fiber, were performed by vertical three-point bending at the free suspended part. A plateau tip was chosen to achieve stable contact and longer working distance for performing larger deformation, enabling intensified reversible SMPA of single fibers. In this way, programming strains of 39 ± 1% or 46 ± 1% were realized for fiber with a diameter of 1 ± 0.2 µm and 300 ± 50 nm, which were bent at 80 °C and fixed at 10 °C. Values for the reversible elongation of εrev = 3.4 ± 0.1% and 10.5 ± 0.1% were obtained for a single micro and nanofiber respectively between 10 and 60 °C. The higher actuation effect observed for nanofiber demonstrated that the highly compact and oriented crystallites in nanofibers, which determined the pronounced εrev compared to the thick microfibers. Besides, a stable reversible actuation of a nanofiber can be tracked by AFM tip up to 10 cycles, indicating a sustainable application can be achieved on the fiber actuators. The findings obtained for cPCL micro-/nano-fibers will help design and evaluate the next generation polymeric microactuators or micromanipulators.
The second part of the thesis studies the shape-memory effect (SME) of a single individual SMP micro-object by controlling deformation temperatures during programming and actuation temperatures during reversible change. In this work, microcuboids of crosslinked poly[ethylene-co-(vinyl acetate)] (cPEVA) elastomers with 18 wt% vinyl acetate (VA) contents were successfully prepared by template-based replication from polydimethylsiloxane (PDMS) mold. The micro-TME and micro-SMPA were observed and studied based on micro-geometry change using optical microscopy (OM) and AFM. Different switching temperatures of shape recovery were achieved from 55 °C to 86 °C by tuning Tp from 55 °C to 100 °C, indicating a successful implementation of micro-TME on individual microcuboid. For micro-SMPA functionalization, microcuboids were deformed by compression at 100 °C and the change in single particle height was monitored during cyclic heating and cooling between various Tseps from 60 °C to 85 °C and 20 °C. The micro-SMPA on a single microcuboid was achieved with a reversible strain in the range of 2 to 7%, whereby higher compression ratio CR and Tsep induced prominent reversible strain. The results achieved in this work demonstrated the successful functionalization of microcuboids with different SMEs by controlling temperatures during programming and actuation processes. Based on these achievements, such micro-objects can be further designed as on demand switchable microactuators or release systems with adjustable working temperatures.
In the last part of the work, a new function of shape-memory polymeric bi-stable 3D structured film was designed and fabricated. The SME and geometrical design of compliant mechanics were merged to enable switching between bi-stable and mono-stable states, which generate snap movement that mimics the Venus flytrap. A truncated tetrahedron structure with a slope angle as a tunable parameter to alter the bi-stability was chosen for the study to combine with
SME. It was anticipated that the structured film designed with a slope angle of 30° exhibited mono-stable behavior, and such a structure with a slope angle of 45° exhibited bi-stable behavior. Then the structured SMP film of designed mono-stable shape was successfully fabricated using soft lithography based on 3D printed master molds supported from digital manufacturing. The structured mold was also used in programming the SMP film into the structure with a higher slope angle to attain bi-stability. Finally, the switching between bi-stable and mono-stable states was successfully realized using SME, which introduces snapping movement triggered by heat. The implementation of compliant mechanisms by the SME increased the magnitude of thermally induced reconfiguration without additional external force.
To sum up, the results of the thesis support the development of smart objects capable of one-way micro-TME, free-standing reversible actuation, or bi-stability mediated shape-memory reconfiguration. Electrospinning and template-based method were used for fabrication with good control of geometry and low size dispersity. Microscopy methods especially the AFM platform with decent sensitivity was developed for implementation as well as characterization of SME on individual micro-/nanoobjects. Implementation of bi-stability improves the shape transformation amplitude of thermally triggered SMP. These findings can give novel insights for designing polymer-based actuators or soft robotics.
In C3 plants, CO2 diffuses into the leaf and is assimilated by the Calvin-Benson cycle in the mesophyll cells. It leaves Rubisco open to its side reaction with O2, resulting in a wasteful cycle known as photorespiration. A sharp fall in atmospheric CO2 levels about 30 million years ago have further increased the side reaction with O2. The pressure to reduce photorespiration led, in over 60 plant genera, to the evolution of a CO2-concentrating mechanism called C4 photosynthesis; in this mode, CO2 is initially incorporated into 4-carbon organic acids, which diffuse to the bundle sheath and are decarboxylated to provide CO2 to Rubisco. Some genera, like Flaveria, contain several species that represent different steps in this complex evolutionary process. However, the majority of terrestrial plant species did not evolve a CO2-concentrating mechanism and perform C3 photosynthesis.
This thesis compares photosynthetic metabolism in several species with C3, C4 and intermediate modes of photosynthesis. Metabolite profiling and stable isotope labelling were performed to detect inter-specific differences changes in metabolite profile and, hence, how a pathway operates. The results obtained were subjected to integrative data analyses like hierarchical clustering and principal component analysis, and were deepened by correlation analyses to uncover specific metabolic features and reaction steps that were conserved or differed between species.
The main findings are that Calvin-Benson cycle metabolite profiles differ between C3 and C4 species and between different C3 species, including a very different response to rising irradiance in Arabidopsis and rice. These findings confirm Calvin-Benson cycle operation diverged between C3 and C4 species and, most unexpectedly, even between different C3 species. Moreover, primary metabolic profiles supported the current C4 evolutionary model in the genus Flaveria and also provided new insights and opened up new questions. Metabolite profiles also point toward a progressive adjustment of the Calvin-Benson cycle during the evolution of C4 photosynthesis. Overall, this thesis point out the importance of a metabolite-centric approach to uncover underlying differences in species apparently sharing the same photosynthetic routes and as a valid method to investigate evolutionary transition between C3 and C4 photosynthesis.