Filtern
Volltext vorhanden
- ja (15) (entfernen)
Erscheinungsjahr
- 2019 (15) (entfernen)
Dokumenttyp
- Dissertation (9)
- Postprint (2)
- Arbeitspapier (2)
- Monographie/Sammelband (1)
- Sonstiges (1)
Sprache
- Englisch (10)
- Deutsch (4)
- Portugiesisch (1)
Schlagworte
- Anden (1)
- Andes (1)
- Arctic tundra (1)
- Argentina (1)
- Argentinien (1)
- Astronomie (1)
- Aussterbeschuld (1)
- Biochemie (1)
- Biodiversität (1)
- Botanik (1)
Institut
- Extern (15) (entfernen)
The knowledge of transformation pathways and identification of transformation products (TPs) of veterinary drugs is important for animal health, food, and environmental matters. The active agent Monensin (MON) belongs to the ionophore antibiotics and is widely used as a veterinary drug against coccidiosis in broiler farming. However, no electrochemically (EC) generated TPs of MON have been described so far. In this study, the online coupling of EC and mass spectrometry (MS) was used for the generation of oxidative TPs. EC-conditions were optimized with respect to working electrode material, solvent, modifier, and potential polarity. Subsequent LC/HRMS (liquid+ chromatography/high resolution mass spectrometry) and MS/MS experiments were performed to identify the structures of derived TPs by a suspected target analysis. The obtained EC-results were compared to TPs observed in metabolism tests with microsomes and hydrolysis experiments of MON. Five previously undescribed TPs of MON were identified in our EC/MS based study and one TP, which was already known from literature and found by a microsomal assay, could be confirmed. Two and three further TPs were found as products in microsomal tests and following hydrolysis, respectively. We found decarboxylation, O-demethylation and acid-catalyzed ring-opening reactions to be the major mechanisms of MON transformation
Dermal Delivery of the High-Molecular-Weight Drug Tacrolimus by Means of Polyglycerol-Based Nanogels
(2019)
Polyglycerol-based thermoresponsive nanogels (tNGs) have been shown to have excellent skin hydration properties and to be valuable delivery systems for sustained release of drugs into skin. In this study, we compared the skin penetration of tacrolimus formulated in tNGs with a commercial 0.1% tacrolimus ointment. The penetration of the drug was investigated in ex vivo abdominal and breast skin, while different methods for skin barrier disruption were investigated to improve skin permeability or simulate inflammatory conditions with compromised skin barrier. The amount of penetrated tacrolimus was measured in skin extracts by liquid chromatography tandem-mass spectrometry (LC-MS/MS), whereas the inflammatory markers IL-6 and IL-8 were detected by enzyme-linked immunosorbent assay (ELISA). Higher amounts of tacrolimus penetrated in breast as compared to abdominal skin or in barrier-disrupted as compared to intact skin, confirming that the stratum corneum is the main barrier for tacrolimus skin penetration. The anti-proliferative effect of the penetrated drug was measured in skin tissue/Jurkat cells co-cultures. Interestingly, tNGs exhibited similar anti-proliferative effects as the 0.1% tacrolimus ointment. We conclude that polyglycerol-based nanogels represent an interesting alternative to paraffin-based formulations for the treatment of inflammatory skin conditions.
Most of the matter in the universe consists of hydrogen. The hydrogen in the intergalactic medium (IGM), the matter between the galaxies, underwent a change of its ionisation state at the epoch of reionisation, at a redshift roughly between 6>z>10, or ~10^8 years after the Big Bang. At this time, the mostly neutral hydrogen in the IGM was ionised but the source of the responsible hydrogen ionising emission remains unclear. In this thesis I discuss the most likely candidates for the emission of this ionising radiation, which are a type of galaxy called Lyman alpha emitters (LAEs). As implied by their name, they emit Lyman alpha radiation, produced after a hydrogen atom has been ionised and recombines with a free electron. The ionising radiation itself (also called Lyman continuum emission) which is needed for this process inside the LAEs could also be responsible for ionising the IGM around those galaxies at the epoch of reionisation, given that enough Lyman continuum escapes. Through this mechanism, Lyman alpha and Lyman continuum radiation are closely linked and are both studied to better understand the properties of high redshift galaxies and the reionisation state of the universe.
Before I can analyse their Lyman alpha emission lines and the escape of Lyman continuum emission from them, the first step is the detection and correct classification of LAEs in integral field spectroscopic data, specifically taken with the Multi-Unit Spectroscopic Explorer (MUSE). After detecting emission line objects in the MUSE data, the task of classifying them and determining their redshift is performed with the graphical user interface QtClassify, which I developed during the work on this thesis. It uses the strength of the combination of spectroscopic and photometric information that integral field spectroscopy offers to enable the user to quickly identify the nature of the detected emission lines. The reliable classification of LAEs and determination of their redshifts is a crucial first step towards an analysis of their properties.
Through radiative transfer processes, the properties of the neutral hydrogen clouds in and around LAEs are imprinted on the shape of the Lyman alpha line. Thus after identifying the LAEs in the MUSE data, I analyse the properties of the Lyman alpha emission line, such as the equivalent width (EW) distribution, the asymmetry and width of the line as well as the double peak fraction. I challenge the common method of displaying EW distributions as histograms without taking the limits of the survey into account and construct a more independent EW distribution function that better reflects the properties of the underlying population of galaxies. I illustrate this by comparing the fraction of high EW objects between the two surveys MUSE-Wide and MUSE-Deep, both consisting of MUSE pointings (each with the size of one square arcminute) of different depths. In the 60 MUSE-Wide fields of one hour exposure time I find a fraction of objects with extreme EWs above EW_0>240A of ~20%, while in the MUSE-Deep fields (9 fields with an exposure time of 10 hours and one with an exposure time of 31 hours) I find a fraction of only ~1%, which is due to the differences in the limiting line flux of the surveys. The highest EW I measure is EW_0 = 600.63 +- 110A, which hints at an unusual underlying stellar population, possibly with a very low metallicity.
With the knowledge of the redshifts and positions of the LAEs detected in the MUSE-Wide survey, I also look for Lyman continuum emission coming from these galaxies and analyse the connection between Lyman continuum emission and Lyman alpha emission. I use ancillary Hubble Space Telescope (HST) broadband photometry in the bands that contain the Lyman continuum and find six Lyman continuum leaker candidates. To test whether the Lyman continuum emission of LAEs is coming only from those individual objects or the whole population, I select LAEs that are most promising for the detection of Lyman continuum emission, based on their rest-frame UV continuum and Lyman alpha line shape properties. After this selection, I stack the broadband data of the resulting sample and detect a signal in Lyman continuum with a significance of S/N = 5.5, pointing towards a Lyman continuum escape fraction of ~80%. If the signal is reliable, it strongly favours LAEs as the providers of the hydrogen ionising emission at the epoch of reionisation and beyond.
Die Herausgeber der „Potsdamer Beiträge zur Sorabistik/Podstupimske pśinoski k Sorbistice“ sind erfreut, nach längerer Pause einen neuen Band veröffentlichen zu können. Gemeinschaftlich legen der Kulturwissenschaftler Tobias Preßler, welcher hier debütiert, und der ausgewiesene Denkmalpfleger i. R. Alfred Roggan, vier Artikel zur niedersorbischen Kulturgeschichte vor. Die Autoren widmen sich der sorbischen Sprache im Norden der Niederlausitz, ihrer ehemaligen Verbreitung und den Umständen ihres Verschwindens. Alle Beiträge nähern sich aus unterschiedlicher Perspektive diesem Thema, wobei die Schwerpunkte auf verschiedenen Zeiten und Regionen liegen. Mit Paul Thol wird sich einem Restaurator und Künstler zugewandt, dessen Werk und Schaffen in die bewegte 1. Hälfte des 20. Jahrhunderts fällt. Diese Zeit bildet gleichsam den Abschluss einer epochenübergreifenden Darstellung zur Politik gegenüber den Sorben und ihrer Sprache, welche ein weiterer Artikel skizziert. In den beiden Herzstücken des Bandes wird der Leser in die frühe Neuzeit entführt. Es wird ein bisher wenig beachtetes Druckwerk aus dem Jahre 1694 vorgestellt, das seinerzeit bewusst in zwölf Sprachen herausgegeben wurde. Als wahres Kleinod der sorbischen Sprachgeschichte findet sich dieses Werk – ein Gedicht – überliefert, das in einem nunmehr ausgestorbenen Dialektzweig verfasst ist. Neben dem Gedicht selbst, werden auch dessen bisherige literarische Bearbeitungen sowie der Entstehungshintergrund des Druckes eingehender beschrieben. Der vierte Beitrag widmet sich einer Region, in welcher wohl der gleiche Dialekt wie der des Gedichtes gesprochen wurde. Bis zum Verklingen der Sprache im 18. Jahrhundert war sie hier genauso lebendig wie sie es heute noch in ihrem Kerngebiet ist.
The foreland of the Andes in South America is characterised by distinct along strike changes in surface deformational styles. These styles are classified into two end-members, the thin-skinned and the thick-skinned style. The superficial expression of thin-skinned deformation is a succession of narrowly spaced hills and valleys, that form laterally continuous ranges on the foreland facing side of the orogen. Each of the hills is defined by a reverse fault that roots in a basal décollement surface within the sedimentary cover, and acted as thrusting ramp to stack the sedimentary pile. Thick-skinned deformation is morphologically characterised by spatially disparate, basement-cored mountain ranges. These mountain ranges are uplifted along reactivated high-angle crustal-scale discontinuities, such as suture zones between different tectonic terranes.
Amongst proposed causes for the observed variation are variations in the dip angle of the Nazca plate, variation in sediment thickness, lithospheric thickening, volcanism or compositional differences. The proposed mechanisms are predominantly based on geological observations or numerical thermomechanical modelling, but there has been no attempt to understand the mechanisms from a point of data-integrative 3D modelling. The aim of this dissertation is therefore to understand how lithospheric structure controls the deformational behaviour. The integration of independent data into a consistent model of the lithosphere allows to obtain additional evidence that helps to understand the causes for the different deformational styles. Northern Argentina encompasses the transition from the thin-skinned fold-and-thrust belt in Bolivia, to the thick-skinned Sierras Pampeanas province, which makes this area a well suited location for such a study. The general workflow followed in this study first involves data-constrained structural- and density-modelling in order to obtain a model of the study area. This model was then used to predict the steady-state thermal field, which was then used to assess the present-day rheological state in northern Argentina.
The structural configuration of the lithosphere in northern Argentina was determined by means of data-integrative, 3D density modelling verified by Bouguer gravity. The model delineates the first-order density contrasts in the lithosphere in the uppermost 200 km, and discriminates bodies for the sediments, the crystalline crust, the lithospheric mantle and the subducting Nazca plate. To obtain the intra-crustal density structure, an automated inversion approach was developed and applied to a starting structural model that assumed a homogeneously dense crust. The resulting final structural model indicates that the crustal structure can be represented by an upper crust with a density of 2800 kg/m³, and a lower crust of 3100 kg/m³. The Transbrazilian Lineament, which separates the Pampia terrane from the Río de la Plata craton, is expressed as a zone of low average crustal densities.
In an excursion, we demonstrate in another study, that the gravity inversion method developed to obtain intra-crustal density structures, is also applicable to obtain density variations in the uppermost lithospheric mantle. Densities in such sub-crustal depths are difficult to constrain from seismic tomographic models due to smearing of crustal velocities. With the application to the uppermost lithospheric mantle in the north Atlantic, we demonstrate in Tan et al. (2018) that lateral density trends of at least 125\,km width are robustly recovered by the inversion method, thereby providing an important tool for the delineation of subcrustal density trends.
Due to the genetic link between subduction, orogenesis and retroarc foreland basins the question rises whether the steady-state assumption is valid in such a dynamic setting. To answer this question, I analysed (i) the impact of subduction on the conductive thermal field of the overlying continental plate, (ii) the differences between the transient and steady-state thermal fields of a geodynamic coupled model. Both studies indicate that the assumption of a thermal steady-state is applicable in most parts of the study area. Within the orogenic wedge, where the assumption cannot be applied, I estimated the transient thermal field based on the results of the conducted analyses.
Accordingly, the structural model that had been obtained in the first step, could be used to obtain a 3D conductive steady-state thermal field. The rheological assessment based on this thermal field indicates that the lithosphere of the thin-skinned Subandean ranges is characterised by a relatively strong crust and a weak mantle. Contrarily, the adjacent foreland basin consists of a fully coupled, very strong lithosphere. Thus, shortening in northern Argentina can only be accommodated within the weak lithosphere of the orogen and the Subandean ranges. The analysis suggests that the décollements of the fold-and-thrust belt are the shallow continuation of shear zones that reside in the ductile sections of the orogenic crust. Furthermore, the localisation of the faults that provide strain transfer between the deeper ductile crust and the shallower décollement is strongly influenced by crustal weak zones such as foliation. In contrast to the northern foreland, the lithosphere of the thick-skinned Sierras Pampeanas is fully coupled and characterised by a strong crust and mantle. The high overall strength prevents the generation of crustal-scale faults by tectonic stresses. Even inherited crustal-scale discontinuities, such as sutures, cannot sufficiently reduce the strength of the lithosphere in order to be reactivated. Therefore, magmatism that had been identified to be a precursor of basement uplift in the Sierras Pampeanas, is the key factor that leads to the broken foreland of this province. Due to thermal weakening, and potentially lubrication of the inherited discontinuities, the lithosphere is locally weakened such that tectonic stresses can uplift the basement blocks. This hypothesis explains both the spatially disparate character of the broken foreland, as well as the observed temporal delay between volcanism and basement block uplift.
This dissertation provides for the first time a data-driven 3D model that is consistent with geophysical data and geological observations, and that is able to causally link the thermo-rheological structure of the lithosphere to the observed variation of surface deformation styles in the retroarc foreland of northern Argentina.
Over the last years there is an increasing awareness that historical land cover changes and associated land use legacies may be important drivers for present-day species richness and biodiversity due to time-delayed extinctions or colonizations in response to historical environmental changes. Historically altered habitat patches may therefore exhibit an extinction debt or colonization credit and can be expected to lose or gain species in the future. However, extinction debts and colonization credits are difficult to detect and their actual magnitudes or payments have rarely been quantified because species richness patterns and dynamics are also shaped by recent environmental conditions and recent environmental changes.
In this thesis we aimed to determine patterns of herb-layer species richness and recent species richness dynamics of forest herb layer plants and link those patterns and dynamics to historical land cover changes and associated land use legacies. The study was conducted in the Prignitz, NE-Germany, where the forest distribution remained stable for the last ca. 100 years but where a) the deciduous forest area had declined by more than 90 per cent (leaving only remnants of "ancient forests"), b) small new forests had been established on former agricultural land ("post-agricultural forests"). Here, we analyzed the relative importance of land use history and associated historical land cover changes for herb layer species richness compared to recent environmental factors and determined magnitudes of extinction debt and colonization credit and their payment in ancient and post-agricultural forests, respectively.
We showed that present-day species richness patterns were still shaped by historical land cover changes that ranged back to more than a century. Although recent environmental conditions were largely comparable we found significantly more forest specialists, species with short-distance dispersal capabilities and clonals in ancient forests than in post-agricultural forests. Those species richness differences were largely contingent to a colonization credit in post-agricultural forests that ranged up to 9 species (average 4.7), while the extinction debt in ancient forests had almost completely been paid. Environmental legacies from historical agricultural land use played a minor role for species richness differences. Instead, patch connectivity was most important. Species richness in ancient forests was still dependent on historical connectivity, indicating a last glimpse of an extinction debt, and the colonization credit was highest in isolated post-agricultural forests. In post-agricultural forests that were better connected or directly adjacent to ancient forest patches the colonization credit was way smaller and we were able to verify a gradual payment of the colonization credit from 2.7 species to 1.5 species over the last six decades.
Thermoresponsive Zellkultursubstrate für zeitlich-räumlich gesteuertes Auswachsen neuronaler Zellen
(2019)
Ein wichtiges Ziel der Neurowissenschaften ist das Verständnis der komplexen und zugleich faszinierenden, hochgeordneten Vernetzung der Neurone im Gehirn, welche neuronalen Prozessen, wie zum Beispiel dem Wahrnehmen oder Lernen wie auch Neuropathologien zu Grunde liegt. Für verbesserte neuronale Zellkulturmodelle zur detaillierten Untersuchung dieser Prozesse ist daher die Rekonstruktion von geordneten neuronalen Verbindungen dringend erforderlich. Mit Oberflächenstrukturen aus zellattraktiven und zellabweisenden Beschichtungen können neuronale Zellen und ihre Neuriten in vitro strukturiert werden. Zur Kontrolle der neuronalen Verbindungsrichtung muss das Auswachsen der Axone zu benachbarten Zellen dynamisch gesteuert werden, zum Beispiel über eine veränderliche Zugänglichkeit der Oberfläche.
In dieser Arbeit wurde untersucht, ob mit thermoresponsiven Polymeren (TRP) beschichtete Zellkultursubstrate für eine dynamische Kontrolle des Auswachsens neuronaler Zellen geeignet sind. TRP können über die Temperatur von einem zellabweisenden in einen zellattraktiven Zustand geschaltet werden, womit die Zugänglichkeit der Oberfläche für Zellen dynamisch gesteuert werden kann. Die TRP-Beschichtung wurde mikrostrukturiert, um einzelne oder wenige neuronale Zellen zunächst auf der Oberfläche anzuordnen und das Auswachsen der Zellen und Neuriten über definierte TRP-Bereiche in Abhängigkeit der Temperatur zeitlich und räumlich zu kontrollieren. Das Protokoll wurde mit der neuronalen Zelllinie SH-SY5Y etabliert und auf humane induzierte Neurone übertragen. Die Anordnung der Zellen konnte bei Kultivierung im zellabweisenden Zustand des TRPs für bis zu 7 Tage aufrecht erhalten werden. Durch Schalten des TRPs in den zellattraktiven Zustand konnte das Auswachsen der Neuriten und Zellen zeitlich und räumlich induziert werden. Immunozytochemische Färbungen und Patch-Clamp-Ableitungen der Neurone demonstrierten die einfache Anwendbarkeit und Zellkompatibilität der TRP-Substrate.
Eine präzisere räumliche Kontrolle des Auswachsens der Zellen sollte durch lokales Schalten der TRP-Beschichtung erreicht werden. Dafür wurden Mikroheizchips mit Mikroelektroden zur lokalen Jouleschen Erwärmung der Substratoberfläche entwickelt. Zur Evaluierung der generierten Temperaturprofile wurde eine Temperaturmessmethode entwickelt und die erhobenen Messwerte mit numerisch simulierten Werten abgeglichen. Die Temperaturmessmethode basiert auf einfach zu applizierenden Sol-Gel-Schichten, die den temperatursensitiven Fluoreszenzfarbstoff Rhodamin B enthalten. Sie ermöglicht oberflächennahe Temperaturmessungen in trockener und wässriger Umgebung mit hoher Orts- und Temperaturauflösung. Numerische Simulationen der Temperaturprofile korrelierten gut mit den experimentellen Daten. Auf dieser Basis konnten Geometrie und Material der Mikroelektroden hinsichtlich einer lokal stark begrenzten Temperierung optimiert werden. Ferner wurden für die Kultvierung der Zellen auf den Mikroheizchips eine Zellkulturkammer und Kontaktboard für die elektrische Kontaktierung der Mikroelektroden geschaffen.
Die vorgestellten Ergebnisse demonstrieren erstmalig das enorme Potential thermoresponsiver Zellkultursubstrate für die zeitlich und räumlich gesteuerte Formation geordneter neuronaler Verbindungen in vitro. Zukünftig könnte dies detaillierte Studien zur neuronalen Informationsverarbeitung oder zu Neuropathologien an relevanten, humanen Zellmodellen ermöglichen.
Vom Monomer zum Glykopolymer
(2019)
Glykopolymere sind synthetische und natürlich vorkommende Polymere, die eine Glykaneinheit in der Seitenkette des Polymers tragen. Glykane sind durch die Glykan-Protein-Wechselwirkung verantwortlich für viele biologische Prozesse. Die Beteiligung der Glykanen in diesen biologischen Prozessen ermöglicht das Imitieren und Analysieren der Wechselwirkungen durch geeignete Modellverbindungen, z.B. der Glykopolymere. Dieses System der Glykan-Protein-Wechselwirkung soll durch die Glykopolymere untersucht und studiert werden, um die spezifische und selektive Bindung der Proteine an die Glykopolymere nachzuweisen. Die Proteine, die in der Lage sind, Kohlenhydratstrukturen selektiv zu binden, werden Lektine genannt.
In dieser Dissertationsarbeit wurden verschiedene Glykopolymere synthetisiert. Dabei sollte auf einen effizienten und kostengünstigen Syntheseweg geachtet werden.
Verschiedene Glykopolymere wurden durch funktionalisierte Monomere mit verschiedenen Zuckern, wie z.B. Mannose, Laktose, Galaktose oder N-Acetyl-Glukosamin als funktionelle Gruppe, hergestellt. Aus diesen funktionalisierten Glykomonomeren wurden über ATRP und RAFT-Polymerisation Glykopolymere synthetisiert.
Die erhaltenen Glykopolymere wurden in Diblockcopolymeren als hydrophiler Block angewendet und die Selbstassemblierung in wässriger Lösung untersucht. Die Polymere formten in wässriger Lösung Mizellen, bei denen der Zuckerblock an der Oberfläche der Mizellen sitzt. Die Mizellen wurden mit einem hydrophoben Fluoreszenzfarbstoff beladen, wodurch die CMC der Mizellenbildung bestimmt werden konnte.
Außerdem wurden die Glykopolymere als Oberflächenbeschichtung über „Grafting from“ mit SI-ATRP oder über „Grafting to“ auf verschiedene Oberflächen gebunden. Durch die glykopolymerbschichteten Oberflächen konnte die Glykan Protein Wechselwirkung über spektroskopische Messmethoden, wie SPR- und Mikroring Resonatoren untersucht werden. Hierbei wurde die spezifische und selektive Bindung der Lektine an die Glykopolymere nachgewiesen und die Bindungsstärke untersucht.
Die synthetisierten Glykopolymere könnten durch Austausch der Glykaneinheit für andere Lektine adressierbar werden und damit ein weites Feld an anderen Proteinen erschließen. Die bioverträglichen Glykopolymere wären alternativen für den Einsatz in biologischen Prozessen als Transporter von Medikamenten oder Farbstoffe in den Körper. Außerdem könnten die funktionalisierten Oberflächen in der Diagnostik zum Erkennen von Lektinen eingesetzt werden. Die Glykane, die keine selektive und spezifische Bindung zu Proteinen eingehen, könnten als antiadsorptive Oberflächenbeschichtung z.B. in der Zellbiologie eingesetzt werden.
Topologische Datenanalyse
(2019)
Bei der Analyse von höherdimensionalen Daten kann deren Gestalt wichtige Informationen über den Datensatz liefern. Bei einer gegebenen Punktwolke, die aus einem unbekannten topologischen Raum ausgewählt wurde, versucht die Topologische Datenanalyse (TDA) den ursprünglichen Raum zu rekonstruieren. Dieser Beitrag soll eine Einführung in die Topologische Datenanalyse geben und konzentriert sich dabei auf zwei wichtige Aspekte: die Persistente Homologie und den Mapper. Dabei werden zuerst die notwendigen theoretischen Grundlagen vorgestellt und anschließend wird die Methodik bei der Visualisierung von Daten eingesetzt.
Die Persistente Homologie ist eines der Standardwerkzeuge in der TDA. Sie findet ihre Anwendung beispielsweise in den Bereichen Formerkennung und -beschreibung. Der Mapper als zweites wichtiges Konzept der TDA wandelt umfangreiche, höherdimensionale Datensätze in Simplizialkomplexe um und kann dadurch geometrische und topologische Eigenschaften der Daten bestimmen. Des Weiteren ist die Mapper-Methode ein brauchbares Werkzeug zur Visualisierungen von mehrdimensionalen Daten, woran statistische Verfahren scheitern.
The natural abundance of Coiled Coil (CC) motifs in cytoskeleton and extracellular matrix proteins suggests that CCs play an important role as passive (structural) and active (regulatory) mechanical building blocks. CCs are self-assembled superhelical structures consisting of 2-7 α-helices. Self-assembly is driven by hydrophobic and ionic interactions, while the helix propensity of the individual helices contributes additional stability to the structure. As a direct result of this simple sequence-structure relationship, CCs serve as templates for protein design and sequences with a pre-defined thermodynamic stability have been synthesized de novo. Despite this quickly increasing knowledge and the vast number of possible CC applications, the mechanical function of CCs has been largely overlooked and little is known about how different CC design parameters determine the mechanical stability of CCs. Once available, this knowledge will open up new applications for CCs as nanomechanical building blocks, e.g. in biomaterials and nanobiotechnology.
With the goal of shedding light on the sequence-structure-mechanics relationship of CCs, a well-characterized heterodimeric CC was utilized as a model system. The sequence of this model system was systematically modified to investigate how different design parameters affect the CC response when the force is applied to opposing termini in a shear geometry or separated in a zipper-like fashion from the same termini (unzip geometry). The force was applied using an atomic force microscope set-up and dynamic single-molecule force spectroscopy was performed to determine the rupture forces and energy landscape properties of the CC heterodimers under study. Using force as a denaturant, CC chain separation is initiated by helix uncoiling from the force application points. In the shear geometry, this allows uncoiling-assisted sliding parallel to the force vector or dissociation perpendicular to the force vector. Both competing processes involve the opening of stabilizing hydrophobic (and ionic) interactions. Also in the unzip geometry, helix uncoiling precedes the rupture of hydrophobic contacts.
In a first series of experiments, the focus was placed on canonical modifications in the hydrophobic core and the helix propensity. Using the shear geometry, it was shown that both a reduced core packing and helix propensity lower the thermodynamic and mechanical stability of the CC; however, with different effects on the energy landscape of the system. A less tightly packed hydrophobic core increases the distance to the transition state, with only a small effect on the barrier height. This originates from a more dynamic and less tightly packed core, which provides more degrees of freedom to respond to the applied force in the direction of the force vector. In contrast, a reduced helix propensity decreases both the distance to the transition state and the barrier height. The helices are ‘easier’ to unfold and the remaining structure is less thermodynamically stable so that dissociation perpendicular to the force axis can occur at smaller deformations.
Having elucidated how canonical sequence modifications influence CC mechanics, the pulling geometry was investigated in the next step. Using one and the same sequence, the force application points were exchanged and two different shear and one unzipping geometry were compared. It was shown that the pulling geometry determines the mechanical stability of the CC. Different rupture forces were observed in the different shear as well as in the unzipping geometries, suggesting that chain separation follows different pathways on the energy landscape. Whereas the difference between CC shearing and unzipping was anticipated and has also been observed for other biological structures, the observed difference for the two shear geometries was less expected. It can be explained with the structural asymmetry of the CC heterodimer. It is proposed that the direction of the α-helices, the different local helix propensities and the position of a polar asparagine in the hydrophobic core are responsible for the observed difference in the chain separation pathways. In combination, these factors are considered to influence the interplay between processes parallel and perpendicular to the force axis.
To obtain more detailed insights into the role of helix stability, helical turns were reinforced locally using artificial constraints in the form of covalent and dynamic ‘staples’. A covalent staple bridges to adjacent helical turns, thus protecting them against uncoiling. The staple was inserted directly at the point of force application in one helix or in the same terminus of the other helix, which did not experience the force directly. It was shown that preventing helix uncoiling at the point of force application reduces the distance to the transition state while slightly increasing the barrier height. This confirms that helix uncoiling is critically important for CC chain separation. When inserted into the second helix, this stabilizing effect is transferred across the hydrophobic core and protects the force-loaded turns against uncoiling. If both helices were stapled, no additional increase in mechanical stability was observed. When replacing the covalent staple with a dynamic metal-coordination bond, a smaller decrease in the distance to the transition was observed, suggesting that the staple opens up while the CC is under load.
Using fluorinated amino acids as another type of non-natural modification, it was investigated how the enhanced hydrophobicity and the altered packing at the interface influences CC mechanics. The fluorinated amino acid was inserted into one central heptad of one or both α-helices. It was shown that this substitution destabilized the CC thermodynamically and mechanically. Specifically, the barrier height was decreased and the distance to the transition state increased. This suggests that a possible stabilizing effect of the increased hydrophobicity is overruled by a disturbed packing, which originates from a bad fit of the fluorinated amino acid into the local environment. This in turn increases the flexibility at the interface, as also observed for the hydrophobic core substitution described above. In combination, this confirms that the arrangement of the hydrophobic side chains is an additional crucial factor determining the mechanical stability of CCs.
In conclusion, this work shows that knowledge of the thermodynamic stability alone is not sufficient to predict the mechanical stability of CCs. It is the interplay between helix propensity and hydrophobic core packing that defines the sequence-structure-mechanics relationship. In combination, both parameters determine the relative contribution of processes parallel and perpendicular to the force axis, i.e. helix uncoiling and uncoiling-assisted sliding as well as dissociation. This new mechanistic knowledge provides insight into the mechanical function of CCs in tissues and opens up the road for designing CCs with pre-defined mechanical properties. The library of mechanically characterized CCs developed in this work is a powerful starting point for a wide spectrum of applications, ranging from molecular force sensors to mechanosensitive crosslinks in protein nanostructures and synthetic extracellular matrix mimics.