Refine
Has Fulltext
- yes (21) (remove)
Year of publication
- 2014 (21) (remove)
Document Type
- Doctoral Thesis (15)
- Postprint (6)
Language
- English (21) (remove)
Is part of the Bibliography
- yes (21) (remove)
Keywords
- Datenanalyse (3)
- Gammastrahlungsastronomie (3)
- data analysis (3)
- gamma-ray astronomy (3)
- Crab Nebula (2)
- Krebsnebel (2)
- Rekonstruktionsmethoden (2)
- Simulationen (2)
- anomalous diffusion (2)
- nonergodicity (2)
Institute
- Institut für Physik und Astronomie (21) (remove)
Herein, we report the chain-growth tin-free room temperature polymerization method to synthesize n-type perylene diimide-dithiophene-based conjugated polymers (PPDIT2s) suitable for solar cell and transistor applications. The palladium/electron-rich tri-tert-butylphosphine catalyst is effective to enable the chain-growth polymerization of anion-radical monomer Br-TPDIT-Br/Zn to PPDIT2 with a molecular weight up to Mw ≈ 50 kg mol−1 and moderate polydispersity. This is the second example of the polymerization of unusual anion-radical aromatic complexes formed in a reaction of active Zn and electron-deficient diimide-based aryl halides. As such, the discovered polymerization method is not a specific reactivity feature of the naphthalene-diimide derivatives but is rather a general polymerization tool. This is an important finding, given the significantly higher maximum external quantum efficiency that can be reached with PDI-based copolymers (32–45%) in all-polymer solar cells compared to NDI-based materials (15–30%). Our studies revealed that PPDIT2 synthesized by the new method and the previously published polymer prepared by step-growth Stille polycondensation show similar electron mobility and all-polymer solar cell performance. At the same time, the polymerization reported herein has several technological advantages as it proceeds relatively fast at room temperature and does not involve toxic tin-based compounds. Because several chain-growth polymerization reactions are well-suited for the preparation of well-defined multi-functional polymer architectures, the next target is to explore the utility of the discovered polymerization in the synthesis of end-functionalized polymers and block copolymers. Such materials would be helpful to improve the nanoscale morphology of polymer blends in all-polymer solar cells.
The atmosphere over the Arctic Ocean is strongly influenced by the distribution of sea ice and open water. Leads in the sea ice produce strong convective fluxes of sensible and latent heat and release aerosol particles into the atmosphere. They increase the occurrence of clouds and modify the structure and characteristics of the atmospheric boundary layer (ABL) and thereby influence the Arctic climate.
In the course of this study aircraft measurements were performed over the western Arctic Ocean as part of the campaign PAMARCMIP 2012 of the Alfred Wegener Institute for Polar and Marine Research (AWI). Backscatter from aerosols and clouds within the lower troposphere and the ABL were measured with the nadir pointing Airborne Mobile Aerosol Lidar (AMALi) and dropsondes were launched to obtain profiles of meteorological variables. Furthermore, in situ measurements of aerosol properties, meteorological variables and turbulence were part of the campaign. The measurements covered a broad range of atmospheric and sea ice conditions.
In this thesis, properties of the ABL over Arctic sea ice with a focus on the influence of open leads are studied based on the data from the PAMARCMIP campaign. The height of the ABL is determined by different methods that are applied to dropsonde and AMALi backscatter profiles. ABL heights are compared for different flights representing different conditions of the atmosphere and of sea ice and open water influence. The different criteria for ABL height that are applied show large variation in terms of agreement among each other, depending on the characteristics of the ABL and its history. It is shown that ABL height determination from lidar backscatter by methods commonly used under mid-latitude conditions is applicable to the Arctic ABL only under certain conditions. Aerosol or clouds within the ABL are needed as a tracer for ABL height detection from backscatter. Hence an aerosol source close to the surface is necessary, that is typically found under the present influence of open water and therefore convective conditions. However it is not always possible to distinguish residual layers from the actual ABL. Stable boundary layers are generally difficult to detect.
To illustrate the complexity of the Arctic ABL and processes therein, four case studies are analyzed each of which represents a snapshot of the interplay between atmosphere and underlying sea ice or water surface. Influences of leads and open water on the aerosol and clouds within the ABL are identified and discussed. Leads are observed to cause the formation of fog and cloud layers within the ABL by humidity emission. Furthermore they decrease the stability and increase the height of the ABL and consequently facilitate entrainment of air and aerosol layers from the free troposphere.
Probably no other field of statistical physics at the borderline of soft matter and biological physics has caused such a flurry of papers as polymer translocation since the 1994 landmark paper by Bezrukov, Vodyanoy, and Parsegian and the study of Kasianowicz in 1996. Experiments, simulations, and theoretical approaches are still contributing novel insights to date, while no universal consensus on the statistical understanding of polymer translocation has been reached. We here collect the published results, in particular, the famous–infamous debate on the scaling exponents governing the translocation process. We put these results into perspective and discuss where the field is going. In particular, we argue that the phenomenon of polymer translocation is non-universal and highly sensitive to the exact specifications of the models and experiments used towards its analysis.
Scientific inquiry requires that we formulate not only what we know, but also what we do not know and by how much. In climate data analysis, this involves an accurate specification of measured quantities and a consequent analysis that consciously propagates the measurement errors at each step. The dissertation presents a thorough analytical method to quantify errors of measurement inherent in paleoclimate data. An additional focus are the uncertainties in assessing the coupling between different factors that influence the global mean temperature (GMT).
Paleoclimate studies critically rely on `proxy variables' that record climatic signals in natural archives. However, such proxy records inherently involve uncertainties in determining the age of the signal. We present a generic Bayesian approach to analytically determine the proxy record along with its associated uncertainty, resulting in a time-ordered sequence of correlated probability distributions rather than a precise time series. We further develop a recurrence based method to detect dynamical events from the proxy probability distributions. The methods are validated with synthetic examples and
demonstrated with real-world proxy records. The proxy estimation step reveals the interrelations between proxy variability and uncertainty. The recurrence analysis of the East Asian Summer Monsoon during the last 9000 years confirms the well-known `dry' events at 8200 and 4400 BP, plus an additional significantly dry event at 6900 BP.
We also analyze the network of dependencies surrounding GMT. We find an intricate, directed network with multiple links between the different factors at multiple time delays. We further uncover a significant feedback from the GMT to the El Niño Southern Oscillation at quasi-biennial timescales. The analysis highlights the need of a more nuanced formulation of influences between different climatic factors, as well as the limitations in trying to estimate such dependencies.
It is generally agreed upon that stars typically form in open clusters and stellar associations, but little is known about the structure of the open cluster system. Do open clusters and stellar associations form isolated or do they prefer to form in groups and complexes? Open cluster groups and complexes could verify star forming regions to be larger than expected, which would explain the chemical homogeneity over large areas in the Galactic disk. They would also define an additional level in the hierarchy of star formation and could be used as tracers for the scales of fragmentation in giant molecular clouds? Furthermore, open cluster groups and complexes could affect Galactic dynamics and should be considered in investigations and simulations on the dynamical processes, such as radial migration, disc heating, differential rotation, kinematic resonances, and spiral structure.
In the past decade there were a few studies on open cluster pairs (de La Fuente Marcos & de La Fuente Marcos 2009a,b,c) and on open cluster groups and complexes (Piskunov et al. 2006). The former only considered spatial proximity for the identification of the pairs, while the latter also required tangential velocities to be similar for the members. In this work I used the full set of 6D phase-space information to draw a more detailed picture on these structures. For this purpose I utilised the most homogeneous cluster catalogue available, namely the Catalogue of Open Cluster Data (COCD; Kharchenko et al. 2005a,b), which contains parameters for 650 open clusters and compact associations, as well as for their uniformly selected members. Additional radial velocity (RV) and metallicity ([M/H]) information on the members were obtained from the RAdial Velocity Experiment (RAVE; Steinmetz et al. 2006; Kordopatis et al. 2013) for 110 and 81 clusters, respectively. The RAVE sample was cleaned considering quality parameters and flags provided by RAVE (Matijevič et al. 2012; Kordopatis et al. 2013). To ensure that only real members were included for the mean values, also the cluster membership, as provided by Kharchenko et al. (2005a,b), was considered for the stars cross-matched in RAVE.
6D phase-space information could be derived for 432 out of the 650 COCD objects and I used an adaption of the Friends-of-Friends algorithm, as used in cosmology, to identify potential groupings. The vast majority of the 19 identified groupings were pairs, but I also found four groups of 4-5 members and one complex with 15 members. For the verification of the identified structures, I compared the results to a randomly selected subsample of the catalogue for the Milky Way global survey of Star Clusters (MWSC; Kharchenko et al. 2013), which became available recently, and was used as reference sample. Furthermore, I implemented Monte-Carlo simulations with randomised samples created from two distinguished input distributions for the spatial and velocity parameters. On the one hand, assuming a uniform distribution in the Galactic disc and, on the other hand, assuming the COCD data distributions to be representative for the whole open cluster population.
The results suggested that the majority of identified pairs are rather by chance alignments, but the groups and the complex seemed to be genuine. A comparison of my results to the pairs, groups and complexes proposed in the literature yielded a partial overlap, which was most likely because of selection effects and different parameters considered. This is another verification for the existence of such structures.
The characteristics of the found groupings favour that members of an open cluster grouping originate from a common giant molecular cloud and formed in a single, but possibly sequential, star formation event. Moreover, the fact that the young open cluster population showed smaller spatial separations between nearest neighbours than the old cluster population indicated that the lifetime of open cluster groupings is most likely comparable to that of the Galactic open cluster population itself. Still even among the old open clusters I could identify groupings, which suggested that the detected structure could be in some cases more long lived as one might think.
In this thesis I could only present a pilot study on structures in the Galactic open cluster population, since the data sample used was highly incomplete. For further investigations a far more complete sample would be required. One step in this direction would be to use data from large current surveys, like SDSS, RAVE, Gaia-ESO and VVV, as well as including results from studies on individual clusters. Later the sample can be completed by data from upcoming missions, like Gaia and 4MOST. Future studies using this more complete open cluster sample will reveal the effect of open cluster groupings on star formation theory and their significance for the kinematics, dynamics and evolution of the Milky Way, and thereby of spiral galaxies.
The H.E.S.S. array is a third generation Imaging Atmospheric Cherenkov Telescope (IACT) array. It is located in the Khomas Highland in Namibia, and measures very high energy (VHE) gamma-rays. In Phase I, the array started data taking in 2004 with its four identical 13 m telescopes. Since then, H.E.S.S. has emerged as the most successful IACT experiment to date. Among the almost 150 sources of VHE gamma-ray radiation found so far, even the oldest detection, the Crab Nebula, keeps surprising the scientific community with unexplained phenomena such as the recently discovered very energetic flares of high energy gamma-ray radiation. During its most recent flare, which was detected by the Fermi satellite in March 2013, the Crab Nebula was simultaneously observed with the H.E.S.S. array for six nights. The results of the observations will be discussed in detail during the course of this work. During the nights of the flare, the new 24 m × 32 m H.E.S.S. II telescope was still being commissioned, but participated in the data taking for one night. To be able to reconstruct and analyze the data of the H.E.S.S. Phase II array, the algorithms and software used by the H.E.S.S. Phase I array had to be adapted. The most prominent advanced shower reconstruction technique developed by de Naurois and Rolland, the template-based model analysis, compares real shower images taken by the Cherenkov telescope cameras with shower templates obtained using a semi-analytical model. To find the best fitting image, and, therefore, the relevant parameters that describe the air shower best, a pixel-wise log-likelihood fit is done. The adaptation of this advanced shower reconstruction technique to the heterogeneous H.E.S.S. Phase II array for stereo events (i.e. air showers seen by at least two telescopes of any kind), its performance using MonteCarlo simulations as well as its application to real data will be described.
In the presented thesis, the most advanced photon reconstruction technique of ground-based γ-ray astronomy is adapted to the H.E.S.S. 28 m telescope. The method is based on a semi-analytical model of electromagnetic particle showers in the atmosphere. The properties of cosmic γ-rays are reconstructed by comparing the camera image of the telescope with the Cherenkov emission that is expected from the shower model. To suppress the dominant background from charged cosmic rays, events are selected based on several criteria. The performance of the analysis is evaluated with simulated events. The method is then applied to two sources that are known to emit γ-rays. The first of these is the Crab Nebula, the standard candle of ground-based γ-ray astronomy. The results of this source confirm the expected performance of the reconstruction method, where the much lower energy threshold compared to H.E.S.S. I is of particular importance. A second analysis is performed on the region around the Galactic Centre. The analysis results emphasise the capabilities of the new telescope to measure γ-rays in an energy range that is interesting for both theoretical and experimental astrophysics. The presented analysis features the lowest energy threshold that has ever been reached in ground-based γ-ray astronomy, opening a new window to the precise measurement of the physical properties of time-variable sources at energies of several tens of GeV.
During this work I built a four wave mixing setup for the time-resolved femtosecond spectroscopy of Raman-active lattice modes. This setup enables to study the selective excitation of phonon polaritons. These quasi-particles arise from the coupling of electro-magnetic waves and transverse optical lattice modes, the so-called phonons. The phonon polaritons were investigated in the optically non-linear, ferroelectric crystals LiNbO₃ and LiTaO₃.
The direct observation of the frequency shift of the scattered narrow bandwidth probe pulses proofs the role of the Raman interaction during the probe and excitation process of phonon polaritons. I compare this experimental method with the measurement where ultra-short laser pulses are used. The frequency shift remains obscured by the relative broad bandwidth of these laser pulses. In an experiment with narrow bandwidth probe pulses, the Stokes and anti-Stokes intensities are spectrally separated. They are assigned to the corresponding counter-propagating wavepackets of phonon polaritons. Thus, the dynamics of these wavepackets was separately studied. Based on these findings, I develop the mathematical description of the so-called homodyne detection of light for the case of light scattering from counter propagating phonon polaritons.
Further, I modified the broad bandwidth of the ultra-short pump pulses using bandpass filters to generate two pump pulses with non-overlapping spectra. This enables the frequency-selective excitation of polariton modes in the sample, which allows me to observe even very weak polariton modes in LiNbO₃ or LiTaO₃ that belong to the higher branches of the dispersion relation of phonon polaritons. The experimentally determined dispersion relation of the phonon polaritons could therefore be extended and compared to theoretical models. In addition, I determined the frequency-dependent damping of phonon polaritons.
In processing and data storage mainly ferromagnetic (FM) materials are being used. Approaching physical limits, new concepts have to be found for faster, smaller switches, for higher data densities and more energy efficiency. Some of the discussed new concepts involve the material classes of correlated oxides and materials with antiferromagnetic coupling. Their applicability depends critically on their switching behavior, i.e., how fast and how energy efficient material properties can be manipulated. This thesis presents investigations of ultrafast non-equilibrium phase transitions on such new materials. In transition metal oxides (TMOs) the coupling of different degrees of freedom and resulting low energy excitation spectrum often result in spectacular changes of macroscopic properties (colossal magneto resistance, superconductivity, metal-to-insulator transitions) often accompanied by nanoscale order of spins, charges, orbital occupation and by lattice distortions, which make these material attractive. Magnetite served as a prototype for functional TMOs showing a metal-to-insulator-transition (MIT) at T = 123 K. By probing the charge and orbital order as well as the structure after an optical excitation we found that the electronic order and the structural distortion, characteristics of the insulating phase in thermal equilibrium, are destroyed within the experimental resolution of 300 fs. The MIT itself occurs on a 1.5 ps timescale. It shows that MITs in functional materials are several thousand times faster than switching processes in semiconductors. Recently ferrimagnetic and antiferromagnetic (AFM) materials have become interesting. It was shown in ferrimagnetic GdFeCo, that the transfer of angular momentum between two opposed FM subsystems with different time constants leads to a switching of the magnetization after laser pulse excitation. In addition it was theoretically predicted that demagnetization dynamics in AFM should occur faster than in FM materials as no net angular momentum has to be transferred out of the spin system. We investigated two different AFM materials in order to learn more about their ultrafast dynamics. In Ho, a metallic AFM below T ≈ 130 K, we found that the AFM Ho can not only be faster but also ten times more energy efficiently destroyed as order in FM comparable metals. In EuTe, an AFM semiconductor below T ≈ 10 K, we compared the loss of magnetization and laser-induced structural distortion in one and the same experiment. Our experiment shows that they are effectively disentangled. An exception is an ultrafast release of lattice dynamics, which we assign to the release of magnetostriction. The results presented here were obtained with time-resolved resonant soft x-ray diffraction at the Femtoslicing source of the Helmholtz-Zentrum Berlin and at the free-electron laser in Stanford (LCLS). In addition the development and setup of a new UHV-diffractometer for these experiments will be reported.
Anomalous diffusion is frequently described by scaled Brownian motion (SBM){,} a Gaussian process with a power-law time dependent diffusion coefficient. Its mean squared displacement is ?x2(t)? [similar{,} equals] 2K(t)t with K(t) [similar{,} equals] t[small alpha]-1 for 0 < [small alpha] < 2. SBM may provide a seemingly adequate description in the case of unbounded diffusion{,} for which its probability density function coincides with that of fractional Brownian motion. Here we show that free SBM is weakly non-ergodic but does not exhibit a significant amplitude scatter of the time averaged mean squared displacement. More severely{,} we demonstrate that under confinement{,} the dynamics encoded by SBM is fundamentally different from both fractional Brownian motion and continuous time random walks. SBM is highly non-stationary and cannot provide a physical description for particles in a thermalised stationary system. Our findings have direct impact on the modelling of single particle tracking experiments{,} in particular{,} under confinement inside cellular compartments or when optical tweezers tracking methods are used.