Refine
Has Fulltext
- no (14) (remove)
Year of publication
Document Type
- Article (14)
Language
- English (14)
Is part of the Bibliography
- yes (14) (remove)
Keywords
- Laser resonators (1)
- incoherent light (1)
- incoherent radiation (1)
- nonlinear frequency conversion (1)
- optical feedback (1)
- periodically poled material (1)
- photon statistics (1)
- semiconductor lasers (1)
- superluminescent diodes (1)
- waveguides (1)
Institute
Stabilized multi-wavelength emission from a single emitter broad area diode laser (BAL) is realized by utilizing an external cavity with a spectral beam combining architecture. Self-organized emitters that are equidistantly spaced across the slow axis are enforced by the spatially distributed wavelength selectivity of the external cavity. This resulted in an array like near-field emission although the BAL is physically a single emitter without any epitaxial sub-structuring and only one electrical contact. Each of the self-organized emitters is operated at a different wavelength and the emission is multiplexed into one spatial mode with near-diffraction limited beam quality. With this setup, multi-line emission of 31 individual spectral lines centered around and a total spectral width of 3.6 nm is realized with a 1000 mu m wide BAL just above threshold. To the best of our knowledge, this is the first demonstration of such a self-organization of emitters by optical feedback utilizing a spectral beam combining architecture.
The emission characteristics of a novel, specially designed broad area diode laser (BAL) with on-chip transversal Bragg resonance (TBR) grating in lateral direction were investigated in an off-axis external cavity setup. The internal TBR grating defines a low loss transversal mode at a specific angle of incidence and a certain wavelength. By providing feedback at this specific angle with an external mirror, it is possible to select this low loss transverse mode and stabilize the BAL. Near diffraction limited emission with an almost single lobed far field pattern could be realized, in contrast to the double lobed far field pattern of similar setups using standard BALs or phase-locked diode laser arrays. Furthermore, we could achieve a narrow bandwidth emission with a simplified setup without external frequency selective elements. (C) 2014 Optical Society of America
Quasi-monolithic ring resonator for efficient frequency doubling of an external cavity diode laser
(2010)
A quasi-monolithic second-harmonic-generation ring resonator assembled with miniaturized components is presented. The ring contains a 10-mm-long bulk periodically poled lithium niobate crystal for second-harmonic generation, four plane mirrors and two gradient-index lenses. All parts are mounted on a glass substrate with an overall size of 19.5 mmx8.5 mmx4 mm. As pump source a broad-area laser diode operated in an external resonator with Littrow arrangement is utilized. This external cavity diode laser provides near diffraction limited, narrow-bandwidth emission with an optical output power of 450 mW at a wavelength of 976 nm. Locking of the diode laser emission to the resonance frequency of the ring cavity was achieved by an optical self-injection locking technique. With this setup more than 126 mW of diffraction-limited blue light at 488 nm could be generated. The opto-optical conversion efficiency was 28% and a wall plug efficiency better than 5.5% could be achieved.
A new approach for efficient second-harmonic generation using diode lasers is presented. The experimental setup is based on a tapered amplifier operated in a ring resonator that is coupled to a miniaturized enhancement ring resonator containing a periodically poled lithium niobate crystal. Frequency locking of the diode laser emission to the resonance frequency of the enhancement cavity is realized purely optically, resulting in stable, single-frequency operation. Blue light at 488 nm with an output power of 310 mW is generated with an optical-to-optical conversion efficiency of 18%.
An external volume Bragg grating (VBG) is used for transverse and longitudinal mode stabilization of a broad area diode laser (BAL) with an on-chip transverse Bragg resonance (TBR) grating. The internal TBR grating defines a transverse low-loss mode at a specific propagation angle inside the BAL. Selection of the TBR mode was realized via the angular geometry of an external resonator assembly consisting of the TBR BAL and a feedback element. A feedback mirror provides near diffraction limited and spectral narrow output in the TBR mode albeit requiring an intricate alignment procedure. If feedback is provided via a VBG, adjustment proves to be far less critical and higher output powers were achieved. Moreover, additional modulation in the far field distribution became discernible allowing for a better study of the TBR concept. (C) 2015 Optical Society of America
The amplified spontaneous emission from a superluminescent diode was frequency doubled in a periodically poled lithium niobate waveguide crystal. The temporally incoherent radiation of such a superluminescent diode is characterized by a relatively broad spectral bandwidth and thermal-like photon statistics, as the measured degree of second order coherence, g((2))(0)= 1.9 +/- 0.1, indicates. Despite the non-optimized scenario in the spectral domain, we achieve six orders of magnitude higher conversion efficiency than previously reported with truly incoherent light. This is possible by using single spatial mode radiation and quasi phase matched material with a waveguide architecture. This work is a principle step towards efficient frequency conversion of temporally incoherent radiation in one spatial mode to access wavelengths where no radiation from superluminescent diodes is available, especially with tailored quasi phase matched crystals. The frequency doubled light might find application in imaging, metrology and quantum optics experiments.
We study the degree of second-order coherence of the emission of a high-power multi-quantum well superluminescent diode with a lateral tapered amplifier section with and without optical feedback. When operated in an external cavity, the degree of second-order coherence changed from the almost thermal case of g((2))(0)approximate to 1.9 towards the mostly coherent case of g((2)) (0) approximate to 1.2 when the injection current at the tapered section was increased. We found good agreement with semi-classical laser theory near and below threshold while above laser threshold a slightly higher g((2))(0) was observed. As a free running device, the superluminescent diode yielded more than 400 mW of optical output power with good spatial beam quality of M-slow(2) < 1.6. In this case, the degree of second-order coherence dropped only slightly from 1.9 at low powers to 1.6 at the maximum output power. To our knowledge, this is the first investigation of a high-power tapered superluminescent diode concerning the degree of second-order coherence. Such a device might be useful for real-world applications probing the second order coherence function, such as ghost imaging.
Two-photon excited fluorescence (TPEF) is a standard technique in modern microscopy(1), but is still affected by photodamage to the probe. It has been proposed that TPEF can be enhanced using entangled photons(2,3), but this has proven challenging. Recently, it was shown that some features of entangled photons can be mimicked with thermal light, which finds application in ghost imaging(4), subwavelength lithography(5) and metrology(6). Here, we use true thermal light from a superluminescent diode to demonstrate TPEF that is enhanced compared to coherent light, using two common fluorophores and luminescent quantum dots, which suit applications in imaging and microscopy. We find that the TPEF rate is directly proportional to the measured(7) degree of second-order coherence, as predicted by theory. Our results show that photon bunching in thermal light can be exploited in two-photon microscopy, with the photon statistic providing a new degree of freedom.
High cw power using an external cavity for spectral beam combining of diode laser-bar emission
(2006)
In extension to known concepts of wavelength-multiplexing diode laser arrays, a new external cavity is presented. The setup simultaneously improves the beam quality of each single emitter of a standard 25 emitter broad-area stripe laser bar and spectrally superimposes the 25 beams into one. By using this external resonator in an "off-axis" arrangement, beam qualities of M-slow(2) < 14 and M-fast(2) < 3 with optical powers in excess of 10 W in cw operation are obtained.
Fundamental optics such as lenses and prisms work by applying phase shifts of several radians to incoming light, and rapid control of such phase shifts is crucial to telecommunications. However, large, controllable optical phase shifts have remained elusive for isolated quantum systems. We have used a single trapped atomic ion to induce and measure a large optical phase shift of 1.3 +/- 0.1 radians in light scattered by the atom. Spatial interferometry between the scattered light and unscattered illumination light enables us to isolate the phase shift in the scattered component. The phase shift achieves the maximum value allowed by atomic theory over the accessible range of laser frequencies, pointing out new opportunities in microscopy and nanophotonics. Single-atom phase shifts of this magnitude open up new quantum information protocols, in particular long-range quantum phase-shift-keying cryptography. DOI: 10.1103/PhysRevLett.110.113605