Refine
Has Fulltext
- no (67) (remove)
Year of publication
- 2005 (67) (remove)
Document Type
- Article (67) (remove)
Language
- English (67)
Is part of the Bibliography
- yes (67)
Institute
- Institut für Geowissenschaften (67) (remove)
This study concerns the Quantitative Phase Analysis (QPA) of historical bricks coming from the complex of the Great Palace of the Byzantine Emperors in Istanbul. The studied samples are characterised by different chemical compositions (low and high calcium content), variable firing temperatures and different amounts of soluble salts as damage products. In the low-Ca samples, the decrease of the phyllosilicate content (from 23.4 to 6.9 wt%) is associated to the increase of the amorphous fraction (from 24 to 48%). This clear negative correlation between the phyllosilicate content and the amorphous fraction indicates that in low-Ca systems vitrification processes are overwhelming with respect to nucleation and recrystallisation processes. By contrast, high-Ca samples present newly formed Ca(Mg) silicates (diopside from 5.7 to 27.2%; anorthite from 1.4 to 8.7%) and aluminium silicates (gehlenite only in two samples, 6.2 and 7.7%) associated to the decrease of quartz (from 27.7 to 11.5%), phyllosilicate (from 6.5% until complete break down) and amorphous (from 30 to 14%) phase fractions. These findings support the role played by the CaO(MgO) content deriving from carbonates decomposition which reacts with Al2O3 and SiO2 oxides from dehydroxylated clay minerals and quartz grains. The above results have been obtained by X-ray powder diffraction data using the combined Rietveld refinement - internal standard method in order to estimate both the crystalline and the amorphous phase fractions. In addition, the coexistence of two distinct plagioclases in high-Ca samples was modelled as follows: a primary albite, which tends to incorporate Ca during the firing process as demonstrated by the increasing of gamma crystallographic angle, and a newly formed anorthite. Finally, by difference between the X-ray fluorescence data and the chemical compositions inferred by QPA, it proved possible to roughly estimate the residual chemical composition attributable to the amorphous fraction. On the basis of our data, we believe that Rietveld refinement combined with the internal standard method represent a powerful tool to better characterise complex polycrystalline and amorphous mixture as in the case of historical bricks
Stable isotope paleoaltimetry makes use of systematic trends in the distribution and isotopic composition of modern precipitation with climate and topography, and of the potential to estimate the isotopic composition of paleoprecipitation from authigenic (in-situ formed) minerals. To illustrate the usefulness as well as potential limitations of this method, we review (1) processes controlling the isotopic composition of modem precipitation, (2) stable isotope data from modern precipitation across regions of high topography, and (3) stable isotope data from authigenic minerals that have been used to infer paleotopography. From this we conclude that stable isotope studies of authigenic minerals can permit useful inferences on paleotopography, with uncertainties that critically depend on a detailed understanding of local- to global-scale paleoclimate during the time interval of interest
The up to similar to4 km high southern Patagonian Andes form a pronounced topographic barrier to atmospheric circulation in the southern hemisphere westerlies, and cause one of the most drastic orographic rain shadows on earth. Geologic data imply that this climatic pattern has been established or significantly enhanced during Miocene surface uplift of this Andean segment. We report evidence for important climatic and ecologic changes in the eastern foreland of the Patagonian Andes that appear to be the result of this uplift. To provide constraints on Miocene plant ecosystems and precipitation in the eastern (leeward) foreland of the Patagonian Andes, we determined carbon and oxygen isotope values of pedogenic carbonate nodules from a similar to500 m thick section of the continental Santa Cruz Formation. The age of these deposits was constrained by Ar/Ar dating of intercalated tuffs, which range from similar to22 to 14 Ma. At similar to16.5 Ma, the delta(13)C values increase by similar to3parts per thousand, the delta(18)O values decrease by >2parts per thousand, and the scatter in the oxygen isotope data increases significantly. We interpret these changes as the consequence of >1 km surface uplift in this Andean segment (from the delta(18)O values), and increased aridity to its east (from the delta(13)C values and the increased scatter in the delta(18)O values). Sediments overlying the Santa Cruz Formation are very limited in extent and volume, and dominated by coarse conglomerates related to Pleistocene and older glaciations. It thus seems that, by similar to14 Ma, deposition in the eastern foreland of the Southern Patagonian Andes had essentially ceased as the result of rain shadow formation. (C) 2004 Elsevier B.V. All rights reserved
Logic trees are widely used in probabilistic seismic hazard analysis as a tool to capture the epistemic uncertainty associated with the seismogenic sources and the ground-motion prediction models used in estimating the hazard. Combining two or more ground-motion relations within a logic tree will generally require several conversions to be made, because there are several definitions available for both the predicted ground-motion parameters and the explanatory parameters within the predictive ground-motion relations. Procedures for making conversions for each of these factors are presented, using a suite of predictive equations in current use for illustration. The sensitivity of the resulting ground-motion models to these conversions is shown to be pronounced for some of the parameters, especially the measure of source-to-site distance, highlighting the need to take into account any incompatibilities among the selected equations. Procedures are also presented for assigning weights to the branches in the ground-motion section of the logic tree in a transparent fashion, considering both intrinsic merits of the individual equations and their degree of applicability to the particular application
The interplay between topography and Indian summer monsoon circulation profoundly controls precipitation distribution, sediment transport, and river discharge along the Southern Himalayan Mountain Front (SHF). The Higher Himalayas form a major orographic barrier that separates humid sectors to the south and and regions to the north. During the Indian summer monsoon, vortices transport moisture from the Bay of Bengal, swirl along the SHF to the northwest, and cause heavy rainfall when colliding with the mountain front. In the eastern and central parts of the Himalaya, precipitation measurements derived from passive microwave analysis (SSM/I) show a strong gradient, with high values at medium elevations and extensive penetration of moisture along major river valleys into the orogen. The end of the monsoonal conveyer belt is near the Sutlej Valley in the NW Himalaya, where precipitation is lower and rainfall maxima move to lower elevations. This region thus comprises a climatic transition zone that is very sensitive to changes in Indian summer monsoon strength. To constrain magnitude, temporal, and spatial distribution of precipitation, we analyzed high-resolution passive microwave data from the last decade and identified an abnormal monsoon year (AMY) in 2002. During the 2002 AMY, violent rainstorms conquered orographic barriers and penetrated far into otherwise and regions in the northwest Himalaya at elevations in excess of 3 km asl. While precipitation in these regions was significantly increased and triggered extensive erosional processes (i.e., debris flows) on sparsely vegetated, steep hillslopes, mean rainfall along the low to medium elevations was not significantly greater in magnitude. This shift may thus play an important role in the overall sediment flux toward the Himalayan foreland. Using extended precipitation and sediment flux records for the last century, we show that these events have a decadal recurrence interval during the present-day monsoon circulation. Hence, episodically occurring AMYs control geomorphic processes primarily in the high-elevation and sectors of the orogen, while annual recurring monsoonal rainfall distribution dominates erosion in the low- to medium- elevation parts along the SHF. (C) 2004 Elsevier B.V. All rights reserved
Late Quaternary intensified monsoon phases control landscape evolution in the northwest Himalaya
(2005)
The intensity of the Asian summer-monsoon circulation varies over decadal to millennial time scales and is reflected in changes in surface processes, terrestrial environments, and marine sediment records. However, the mechanisms of long-lived (2-5 k.y.) intensified monsoon phases, the related changes in precipitation distribution, and their effect on landscape evolution and sedimentation rates are not yet well understood. The and high-elevation sectors of the orogen correspond to a climatically sensitive zone that currently receives rain only during abnormal (i.e., strengthened) monsoon seasons. Analogous to present-day rainfall anomalies, enhanced precipitation during an intensified monsoon phase is expected to have penetrated far into these geomorphic threshold regions where hillslopes are close to the angle of failure. We associate landslide triggering during intensified monsoon phases with enhanced precipitation, discharge, and sediment flux leading to an increase in pore-water pressure, lateral scouring of rivers, and over- steepening of hillslopes, eventually resulting in failure of slopes and exceptionally large mass movements. Here we use lacustrine deposits related to spatially and temporally clustered large landslides (>0.5 km(3)) in the Sutlej Valley region of the northwest Himalaya to calculate sedimentation rates and to infer rainfall patterns during late Pleistocene (29-24 ka) and Holocene (10-4 ka) intensified monsoon phases. Compared to present-day sediment-flux measurements, a fivefold increase in sediment-transport rates recorded by sediments in landslide-dammed lakes characterized these episodes of high climatic variability. These changes thus emphasize the pronounced imprint of millennial-scale climate change on surface processes and landscape evolution
The effect of water activity on the oxidation and structural state of Fe in a ferro-basaltic melt
(2005)
Experimental investigations have been performed at T = 1200 degrees C, P = 200 MPa and fH(2) corresponding to H2O-MnO-Mn3O4 and H2O-QFM redox buffers to study the effect of H2O activity on the oxidation and structural state of Fe in an iron-rich basaltic melt. The analysis of Mossbauer and Fe K-edge X-ray absorption nearedge structure (XANES) spectra of the quenched hydrous ferrobasaltic glasses shows that the Fe3+/Sigma Fe ratio of the glass is directly related to aH(2)O in a H-2-buffered system and, consequently, to the prevailing oxygen fugacity (through the reaction of water dissociation H2O <-> H-2 + 1/2 O-2). However, water as a chemical component of the silicate melt has an indistinguishable effect on the redox state of iron at studied conditions. The experimentally obtained relationship between fO(2) and Fe3+/Fe2+ in the hydrous ferrobasaltic melt can be adequately predicted in the investigated range by the existing empiric and thermodynamic models. The ratio of ferric and ferrous Fe is proportional to the oxygen fugacity to the power of similar to 0.25 which agrees with the theoretical value from the stoichiometry of the Fe redox reaction (FeO + 1/4 O-2 = FeO1.5). The mean centre shifts for Fe2+ and Fe3+ absorption doublets in Mossbauer spectra show little change with increasing Fe3+/Sigma Fe, suggesting no significant change in the type of iron coordination. Similarly, XANES preedge spectra indicate a mixed (C3h, Td, and Oh, i.e., 5-, 4-, and sixfold) coordination of Fe in hydrous basaltic glasses. Copyright (c) 2005 Elsevier Ltd
Subduction factory : 1. Theoretical mineralogy, densities, seismic wave speeds, and H2O contents
(2005)
Carpholite+chloritoid+pyrophyllite association occurs widely in the Triassic metaclastic rocks of the Afyon Zone in west-central Turkey. Fe-Mg-carpholite is associated with rare aragonite pseudomorphs and glaucophane in marbles and metabasites, respectively. The Afyon Zone consists stratigraphically of a Pan-African basement and an overlying Mesozoic cover sequence. The Pan-African basement, which shows Barrovian-type amphibolite-facies metamorphism, comprises garnet-mica schists, intruded by sodic amphibole-bearing metagabbros and leucocratic metagranites. It is unconformably overlain by a continuous metasedimentary sequence extending from Triassic to early Palaeocene. This cover sequence begins with metaconglomerates, which pass upwards into phyllites. Fe-Mg-carpholite occurs within this metaclastic sequence as rosette-like crystals in metapelites and fibres in quartz segregations. The metaclastic rocks are succeeded by metamorphosed platform carbonates, grading into Latest Mesozoic metamorphosed pelagic limestones, which in turn progress up to a Late Mesozoic-Early Tertiary olistostrome. This sequence is tectonically overlain by the blueschists of the Tavsanh Zone. Fe-Mg-carpholite-bearing assemblages imply temperatures of about 350 degrees C and minimum pressures of 6-9 kbar, corresponding to burial depths of about 30 km for the Mesozoic passive continental margin sediments and the underlying Pan-African supracrustal metasediments and metaintrusives. The metamorphic rocks of the Afyon Zone are unconformably overlain by Upper Palaeocene-Lower Eocene sedimentary rocks, indicating a Paleocene age for the regional HP/LT metamorphism. This implies continuous younging of HP/LT metamorphism in the Anatolides related to northward subduction of the Anatolide-Tauride platform beneath the Sakarya Zone. From north to south this involved the Tavsanh Zone (Campanian, 80 +/- 5 Ma), the Afyon Zone (Palaeocene?), the Menderes Massif (Middle Eocene) and the Lycian Nappes (Late Cretaceous-Eocene?), all of which were probably derived from the frontal part of the Anatolide-Tauride platform. (c) 2005 Elsevier B.V. All rights reserved
[1] The Puna-Altiplano plateau in South America is a high-elevation, low internal relief landform that is characterized by internal drainage and hyperaridity. Thermochronologic and sedimentologic observations from the Sierra de Calalaste region in the southwestern Puna plateau, Argentina, place new constraints on early plateau evolution by resolving the timing of uplift of mountain ranges that bound present-day basins and the filling pattern of these basins during late Eocene-Miocene time. Paleocurrent indicators, sedimentary provenance analyses, and apatite fission track thermochronology indicate that the original paleodrainage setting was disrupted by exhumation and uplift of the Sierra de Calalaste range between 24 and 29 Ma. This event was responsible for basin reorganization and the disruption of the regional fluvial system that has ultimately led to the formation of internal drainage conditions, which, in the Salar de Antofalla, were established not later than late Miocene. Upper Eocene-Oligocene sedimentary rocks flanking the range contain features that suggest an arid environment existed prior to and during its uplift. Provenance data indicate a common similar source located to the west for both the southern Puna and the Altiplano of Bolivia during the late Eocene- Oligocene with sporadic local sources. This suggests the existence of an extensive, longitudinally oriented foreland basin along the central Andes during this time