Refine
Has Fulltext
- no (24) (remove)
Year of publication
Language
- English (24)
Is part of the Bibliography
- yes (24)
Keywords
- exhumation (5)
- Pamir (4)
- thermochronology (4)
- Himalaya (3)
- Cosmogenic nuclides (1)
- ELA (1)
- Glacial buzzsaw (1)
- Glaciation (1)
- Haimantas (1)
- Indian Summer Monsoon (1)
Institute
The potential link between erosion rates at the Earth’s surface and changes in global climate has intrigued geoscientists for decades1,2 because such a coupling has implications for the influence of silicate weathering3,4 and organic-carbon burial5 on climate and for the role of Quaternary glaciations in landscape evolution1,6. A global increase in late-Cenozoic erosion rates in response to a cooling, more variable climate has been proposed on the basis of worldwide sedimentation rates7. Other studies have indicated, however, that global erosion rates may have remained steady, suggesting that the reported increases in sediment-accumulation rates are due to preservation biases, depositional hiatuses and varying measurement intervals8,9,10. More recently, a global compilation of thermochronology data has been used to infer a nearly twofold increase in the erosion rate in mountainous landscapes over late-Cenozoic times6. It has been contended that this result is free of the biases that affect sedimentary records11, although others have argued that it contains biases related to how thermochronological data are averaged12 and to erosion hiatuses in glaciated landscapes13. Here we investigate the 30 locations with reported accelerated erosion during the late Cenozoic6. Our analysis shows that in 23 of these locations, the reported increases are a result of a spatial correlation bias—that is, combining data with disparate exhumation histories, thereby converting spatial erosion-rate variations into temporal increases. In four locations, the increases can be explained by changes in tectonic boundary conditions. In three cases, climatically induced accelerations are recorded, driven by localized glacial valley incision. Our findings suggest that thermochronology data currently have insufficient resolution to assess whether late-Cenozoic climate change affected erosion rates on a global scale. We suggest that a synthesis of local findings that include location-specific information may help to further investigate drivers of global erosion rates.
Despite remarkable tectonostratigraphic similarities along the Himalayan arc, pronounced topographic and exhumational variability exists in different morphotectonic segments. The processes responsible for this segmentation are debated. Of particular interest is a 30- to 40-km-wide orogen-parallel belt of rapid exhumation that extends from central Nepal to the western Himalaya and its possible linkage to a midcrustal ramp in the basal decollement, and the related growth of Lesser Himalayan duplex structures. Here we present 26 new apatite fission track cooling ages from the Beas-Lahul region, at the transition from the Central to the Western Himalaya (77 degrees-78 degrees E) to investigate segmentation in the Himalayan arc from a thermochronologic perspective. Together with previously published data from this part of the orogen, we document significant lateral changes in exhumation between the Dhauladar Range to the west, the Beas-Lahul region, and the Sutlej area to the east of the study area. In contrast to the Himalayan front farther east, exhumation in the far western sectors is focused at the frontal parts of the mountain range and associated with the hanging wall of the Main Boundary Thrust fault ramp. Our results allow us to spatially correlate the termination of the rapid exhumation belt with a midcrustal ramp to the west. We suggest that a plunging anticline at the northwestern edge of the Larji-Kullu-Rampur window represents the termination of the Central Himalayan segment, which is related to the evolution of the Lesser Himalayan duplex. Key Points
Competing hypotheses suggest that Himalayan topography is sustained and the plate convergence is accommodated either solely along the basal decollement, the Main Himalayan thrust (MHT), or more broadly, across multiple thrust faults. In the past, structural, geomorphic, and geodetic data of the Nepalese Himalaya have been used to constrain the geometry of the MHT and its shallow frontal thrust fault, known as Main Frontal thrust (MFT). The MHT flattens at depth and connects to a hinterland mid-crustal, steeper thrust ramp, located similar to 100 km north of the deformation front. There, the present-day convergence across the Himalaya is mostly accommodated by slip along the MFT. Despite a general agreement that in Nepal most of the shortening is accommodated along the MHT, some researchers have suggested the occurrence of persistent out-of-sequence shortening on interior faults near the Main Central thrust (MCT). Along the northwest Himalaya, in contrast, some of these characteristics of central Nepal are missing, suggesting along-strike variation of wedge deformation and MHT fault geometry. Here we present new field observations and seven zircon (U-Th)/He (ZHe) cooling ages combined with existing low-temperature data sets. In agreement with our previous findings, we suggest that the transect of cooling age patterns across the frontal Dhauladhar Range reveals that the Main Boundary thrust (MBT) is a primary fault, which has uplifted and sustained this spectacular mountain front since at least the late Miocene. Our results suggest that the MBT forms an similar to 40-km-long fault ramp before it soles into the MHT, and motion along it has exhumed rocks from depth of similar to 8-10 km. New three-dimensional thermokinematic modeling (using Pecube finite-element code) reveals that the observed ZHe and apatite fission track cooling ages can only be explained by sustained mean MBT slip rates between similar to 2.6 and 3.5 mm a(-1) since at least 8 Ma, which corresponds to a horizontal shortening rate of similar to 1.7-2.4 mm a(-1). We propose that the MBT is active today, despite a lack of definitive field or seismogenic evidence, and continues to accommodate crustal shorting by out-of-sequence faulting. Assuming that present-day geodetic shorting rates (similar to 14 +/- 2 mm a(-1)) across the northwest Himalaya have been sustained over geologic time scales, this implies that the MBT accommodated similar to 15% of the total Himalayan convergence since its onset. Furthermore, our modeling results imply that the MHT is missing a hinterland mid-crustal ramp further north.
Despite a large number of dated glacial landforms in the Himalaya, the ice extent during the global Last Glacial Maximum (LGM) from 19 to 23 ka is only known to first order. New cosmogenic Be-10 exposure ages from well-preserved glacially polished surfaces, combined with published data, and an improved production rate scaling model allow reconstruction of the LGM ice extent and subsequent deglaciation in the Chandra Valley of NW India. We show that a >1000 m thick valley glacier retreated >150 km within a few thousand years after the onset of LGM deglaciation. By comparing the recession of the Chandra Valley Glacier and other Himalayan glaciers with those of Northern and Southern Hemisphere glaciers, we demonstrate that post-LGM deglaciation was similar and nearly finished prior to the Bolling/Allerod interstadial. Our study supports the view that many Himalayan glaciers advanced during the LGM, likely in response to global variations in temperature.
Deciphering the response of sediment routing systems to climatic forcing is fundamental for understanding the impacts of climate change on landscape evolution. In the Kangra Basin (northwest Sub-Himalaya, India), upper Pleistocene to Holocene alluvial fills and fluvial terraces record periodic fluctuations of sediment supply and transport capacity on timescales of 10(3) to 10(5) yr. To evaluate the potential influence of climate change on these fluctuations, we compare the timing of aggradation and incision phases recorded within remnant alluvial fans and terraces with climate archives. New surface-exposure dating of six terrace levels with in-situ cosmogenic Be-10 indicates the onset of incision phases. Two terrace surfaces from the highest level (T1) sculpted into the oldest preserved alluvial fan (AF1) date back to 53.4 +/- 3.2 ka and 43.0 +/- 2.7 ka (1 sigma). T2 surfaces sculpted into the remnants of AF1 have exposure ages of 18.6 +/- 1.2 ka and 15.3 +/- 0.9 ka, while terraces sculpted into the upper Pleistocene-Holocene fan (AF2) provide ages of 9.3 +/- 0.4 ka (T3), 7.1 +/- 0.4 ka (T4), 5.2 +/- 0.4 ka (T5) and 3.6 +/- 0.2 ka (T6). Together with previously published OSL ages yielding the timing of aggradation, we find a correlation between variations in sediment transport with oxygen-isotope records from regions affected by the Indian Summer Monsoon. During periods of increased monsoon intensity and post-Last Glacial Maximum glacial retreat, aggradation occurred in the Kangra Basin, likely due to high sediment flux, whereas periods of weakened monsoon intensity or lower sediment supply coincide with incision. (C) 2016 Elsevier B.V. All rights reserved.
The southernmost thrust of the Himalayan orogenic wedge that separates the foreland from the orogen, the Main Frontal Thrust, is thought to accommodate most of the ongoing crustal shortening in the Sub-Himalaya. Steepened longitudinal river profile segments, terrace offsets, and back-tilted fluvial terraces within the Kangra reentrant of the NW Sub-Himalaya suggest Holocene activity of the Jwalamukhi Thrust (JMT) and other thrust faults that may be associated with strain partitioning along the toe of the Himalayan wedge. To assess the shortening accommodated by the JMT, we combine morphometric terrain analyses with in situ Be-10-based surface-exposure dating of the deformed terraces. Incision into upper Pleistocene sediments within the Kangra Basin created two late Pleistocene terrace levels (T1 and T2). Subsequent early Holocene aggradation shortly before similar to 10ka was followed by episodic reincision, which created four cut-and-fill terrace levels, the oldest of which (T3) was formed at 10.10.9ka. A vertical offset of 445m of terrace T3 across the JMT indicates a shortening rate of 5.60.8 to 7.51.1mma(-1) over the last similar to 10ka. This result suggests that thrusting along the JMT accommodates 40-60% of the total Sub-Himalayan shortening in the Kangra reentrant over the Holocene. We speculate that this out-of-sequence shortening may have been triggered or at least enhanced by late Pleistocene and Holocene erosion of sediments from the Kangra Basin.
Modification of the landscape by glacial erosion reflects the dynamic interplay of climate through temperature, precipitation, and prevailing wind direction, and tectonics through rock uplift and exhumation rate, lithology, and range and fault geometry. We investigate these relationships in the northeast Pamir Mountains using mapping and dating of moraines and terraces to determine the glacial history. We analyze modem glacial morphology to determine glacier area, spacing, headwall relief, debris cover, and equilibrium line altitude (ELA) using the area x altitude balance ratio (AABR), toe-to-headwall altitude ratio (THAR) and toe-to-summit altitude method (TSAM) for 156 glaciers and compare this to lithologic, tectonic, and climatic data We observe a pronounced asymmetry in glacial ELA, area, debris cover, and headwall relief that we interpret to reflect both structural and climatic control: glaciers on the downwind (eastern) side of the range are larger, more debris covered, have steeper headwalls, and tend to erode headward, truncating the smaller glaciers of the upwind, fault-controlled side of the range. We explain this by the transfer of moisture deep into the range as wind-blown or avalanched snow and by limitations imposed on glacial area on the upwind side of the range by the geometry of the Kongur extensional system (KES). The correspondence between rapid exhumation along the KES and maxima in glacier debris cover and headwall relief and minimums in all measures of ELA suggest that taller glacier headwalls develop in a response to more rapid exhumation rates. However, we find that glaciers in the Muji valley did not extend beyond the range front until at least 43 ka, in contrast to extensive glaciation since 300 ka in the south around the high peaks, a pattern which does not clearly reflect uplift rate. Instead, the difference in glacial history and the presence of large peaks (Muztagh Ata and Kongur Shan) with flanking glaciers likely reflects lithologic control (i.e., the location of crustal gneiss domes) and the formation of peaks that rise above the ELA and escape the glacial buzzsaw. (C) 2014 Elsevier B.V. All rights reserved.
The timing of the late Cenozoic collision between the Pamir salient and the Tien Shan as well as changes in the relative motion between the Pamir and Tarim are poorly constrained. The northern margin of the Pamir salient indented northward by similar to 300 km during the late Cenozoic, accommodated by south-dipping intracontinental subduction along the Main Pamir Thrust (MPT) coupled to strike-slip faults on the eastern flank of the orogen and both strike-slip and thrust faults on the western margin. The Kashgar-Yecheng transfer system (KYTS) is the main dextral slip shear zone separating Tarim from the Eastern Pamir, with an estimated cumulative offset of similar to 280 km at an average late Cenozoic dextral slip rate of 11-15 mm/a (Cowgill, 2010). In order to better constrain the slip history of the KYTS, we collected thermochronologic samples along the eastward-flowing, deeply incised, antecedent Tashkorgan-Yarkand River, which crosses the fault system on the eastern flank of the orogen. We present 29 new biotite (40)Ar/(39)Ar ages, apatite and zircon (U-Th-Sm)/He ages, and apatite fission track (AFT) analysis, combined with published muscovite and biotite (40)Ar/(39)Ar and AFT data, to create a unique thermochronologic dataset in this poorly studied and remote region. We constrain the timing of four major N-trending faults: the latter three are strands of the KYTS. The westernmost, the Kuke fault, experienced significant dip-slip, west-side-up displacement between > 12 and 6 Ma. To the east, within the KYTS, our new thermochronologic data and geomorphic observations suggest that the Kumtag and Kusilaf dextral slip faults have been inactive since at least 3-5 Ma. Long-term incision rates across the Aertashi dextral slip fault, the easternmost strand of the KYTS, are compatible with slow horizontal slip rates of 1.7-5.3 mm/a over the past 3 to 5 Ma. In summary, these data show that the slip rate of the KYTS decreased substantially during the late Miocene or Pliocene. Furthermore, Miocene-present regional kinematic reconstructions suggest that this deceleration reflects the substantial increase of northward motion of Tarim rather than a significant decrease of the northward velocity of the Pamir. (C) 2011 Elsevier B.V. All rights reserved.
In the Himalaya of Chamba, NW India, a major orographic barrier in front of the Greater Himalayan Range extracts a high proportion of the monsoonal rainfall along its southern slopes and effectively shields the orogen interior from moisture-bearing winds. Along a similar to 100-km-long orogen perpendicular transect, 28 new apatite fission track (AFT) and 30 new zircon (U-Th)/He (ZHe) cooling ages reveal marked variations in age distributions and long-term exhumation rates between the humid frontal range and the semi-arid orogen interior. On the southern topographic front, very young, elevation-invariant AFT ages of <4 Ma have been obtained that are concentrated in a similar to 30-km-wide zone; 1-D-thermal modeling suggests a Plio-Pleistocene mean erosion rate of 0.8-1.9 mm yr(-1). In contrast, AFT and ZHe ages within the orogen interior are older (4-9 and 7-18 Ma, respectively), are positively correlated with sample elevation, and yield lower mean erosion rates (0.3-0.9 mm yr(-1)). Protracted low exhumation rates within the orogen interior over the last similar to 15 Myr prevailed contemporaneously with overall humid conditions and an effective erosional regime within the southern Himalaya. This suggests that the frontal Dhauladar Range was sufficiently high during this time to form an orographic barrier, focusing climatically enhanced erosional processes and tectonic deformation there. Thrusting along the two frontal range-bounding thrust, the Main Central Thrust and the Main Boundary Thrusts, was initiated at least similar to 15 Ma ago and has remained localized since then. The lack of evidence for localized uplift farther north indicates either a rather flat decollement with no ramp or the absence of active duplex systems beneath the interior of Chamba. Exhumational variability within Chamba is best explained as the result of continuous thrusting along a major basal decollement, with a flat beneath the slowly exhuming internal compartments and a steep frontal ramp at the rapidly exhuming frontal range. The pattern in Chamba contrasts with what is observed elsewhere along the Himalaya, where exhumation is focused in a zone similar to 150 km north of the orogenic front. In the NW Himalaya, preserved High Himalayan Crystalline nappes and Lesser Himalayan windows alternate on a relatively small scale of <100 km; these alternations are closely correlated with the pattern of exhumation. Although the spatial distribution of high-exhumation zones varies considerably between individual Himalayan sectors, all of these zones are closely correlated with locally higher rock-uplift rates, sharp topographic discontinuities, and focused orographic precipitation, suggesting strong feedbacks between tectonically driven rock uplift, orographically enhanced precipitation, and erosional processes.
Synorogenic extension has been recognized as an integral structural constituent of mountain belts and high-elevation plateaus during their evolution. In the Himalaya, both orogen-parallel and orogen-normal extension has been recognized. However, the underlying driving forces for extension and their timing are still a matter of debate. Here we present new fault kinematic data based on systematic measurements of hundreds of outcrop-scale brittle fault planes in the NW Indian Himalaya. This new data set, as well as field observations including crosscutting relationships, mineral fibers on fault planes, and correlations with deformation structures in lake sediments, allows us to distinguish different deformation styles. The overall strain pattern derived from our data reflects the large regional contractional deformation pattern very well but also reveals significant extensional deformation in a region, which is dominated by shortening. In total, we were able to identify six deformation styles, most of which are temporally and spatially linked, representing protracted shortening. Our observations also furnish the basis for a detailed overview of the younger deformation history in the NW Himalaya, which has been characterized by extension overprinting previously generated structures related to shortening. The four dominant deformation styles are (1) shortening parallel to the regional convergence direction; (2) arc-normal extension; (3) arc-parallel extension; and finally, (4) E-W extension. This is the first data set where a succession of both arc-normal and E-W extension has been documented in the Himalaya. Importantly, our observations help differentiate E-W extension triggered by processes within the Tibetan Plateau from arc-parallel and arc-normal extension originating from the curvature of the Himalayan orogen.