Refine
Has Fulltext
- yes (15) (remove)
Year of publication
- 2004 (15) (remove)
Document Type
- Doctoral Thesis (11)
- Postprint (4)
Keywords
- Diodenlaserspektroskopie (2)
- Isotopenverhältnis (2)
- Kohlendioxid (2)
- Miniemulsion (2)
- Nanopartikel (2)
- miniemulsion (2)
- polymerization (2)
- water (2)
- Anisotropie (1)
- Anthrazen (1)
- Azobenzen (1)
- Bindung (1)
- Bodengas (1)
- Calcium (1)
- Chitosan (1)
- Ellipsometrie (1)
- Emulsion (1)
- Ethen (1)
- Ferrofluid (1)
- Fluoreszenz (1)
- Gadolinium (1)
- Grenzfläche (1)
- Grenzflächenpolarierung (1)
- Hofmeister (1)
- Hydroxyapatit (1)
- Ion mobility spectrometry (1)
- Ionen (1)
- Ionenverteilung (1)
- Isothermal Titration Calorimetry (1)
- Isotherme Titrationskalorimetrie (1)
- Isotope ratio (1)
- Kolloid (1)
- Kolloide (1)
- Kompositmaterial (1)
- Kompositpolymer (1)
- Lanthano (1)
- Laser (1)
- Lichtstreuung (1)
- Lipide (1)
- Magnetic (1)
- Magnetisch (1)
- Maxwell-Wagner (1)
- Membran (1)
- Micr (1)
- Mikrowelle (1)
- PAH (1)
- POF; Reliabilität; Abbau; Chemilumineszenz (1)
- POF; reliability; degradation; chemiluminescence (1)
- Polyelektrolyt (1)
- Polyelektrolyte (1)
- Polymerisation (1)
- RAFT (1)
- REMPI (1)
- Rohrreaktor (1)
- Salz (1)
- Stilben (1)
- Struktur (1)
- Stäbchen-Knäul; amphiphile Blockcopolymere; ; Polypeptide; Festphasen; Struktur; Morphologie; Kolloide; Selbstorganisation; Vesikel; schaltbare Aggr (1)
- Vesikel (1)
- Wasser (1)
- Zimtsäureester (1)
- anisotropy (1)
- anthracene (1)
- azobenzene (1)
- binding (1)
- blockcopolymer (1)
- blockcopolymere (1)
- calcium (1)
- carbon dioxide (1)
- carbon monoxide (1)
- casting (1)
- catalytic application (1)
- cinnamic ester (1)
- colloid (1)
- colloids (1)
- composite (1)
- composites (1)
- diode laser spectroscopy (1)
- ellipsometry (1)
- ethylene (1)
- ferrofluid (1)
- fluorescence (1)
- flüssigkristallin (1)
- gadolinium (1)
- hydroxyapatite (1)
- interface (1)
- ion distribution (1)
- ion selective electrode (1)
- ionenselektive Elektrode (1)
- ions (1)
- isotope ratios (1)
- kolloidale Stabilität (1)
- lanthanide (1)
- light scattering (1)
- lipids (1)
- liquid crystalline (1)
- meso (1)
- metal oxides (1)
- micro (1)
- multifunctional polymers (1)
- multifunktionale Polymere (1)
- nano (1)
- nanoparticles (1)
- nanostructured composite (1)
- op (1)
- optis (1)
- paramagnetic (1)
- paramagnetisch (1)
- photosensitiv (1)
- photosensitive (1)
- polyelectrolyte (1)
- polyelectrolytes (1)
- porous (1)
- porous materials (1)
- porös (1)
- radical (1)
- radikalische Polymerisation (1)
- rod-coil; amphiphilic block copolymers; polypeptide; solid state; structure; morphology; kolloids; self assembly; vesicles; switchable aggregates (1)
- salt (1)
- silica (1)
- silikat (1)
- soil gas (1)
- stilbene (1)
- stimuli-sensitive (1)
- structure (1)
- superparamagnetic (1)
- superparamagnetisch (1)
- tunable diode laser (TDL) (1)
- vesicle (1)
- wasser (1)
- Überstrukturierte Komposite (1)
- überlebende Radikale (1)
Institute
- Institut für Chemie (15) (remove)
The drift time spectra of polycyclic aromatic hydrocarbons (PAH), alkylbenzenes and alkylphenylethers were recorded with a laser-based ion mobility (IM) spectrometer. The ion mobilities of all compounds were determined in helium as drift gas. This allows the calculation of the diffusion cross sections (Omegacalc) on the basis of the exact hard sphere scattering model (EHSSM) and their comparison with the experimentally determined diffusion cross sections (Omegaexp). These Omegaexp/Omegacalc-correlations are presented for molecules with a rigid structure like PAH and prove the reliability of the theoretical model and experimental method. The increase of the selectivity of IM spectrometry is demonstrated using resonance enhanced multiphoton ionisation (REMPI) at atmospheric pressure, realized by tuneable lasers. The REMPI spectra of nine alkylbenzenes and alkylphenylethers are investigated. On the basis of these spectra, the complete qualitative distinction of eight compounds in a mixture is shown. These experiments are extended to alkylbenzene isomer mixtures.
Deuteration effects on the vibronic structure of the emission and excitation spectra of triangular [4]phenylene (D3h[4]phenylene) were studied using laser-excited Shpolskii spectroscopy (LESS) in an octane matrix at 4.2 K. For correct assignment of the vibrational modes, the experimental results were compared with calculated frequencies (B3LYP/6-31G*). CH vibrations were identified by their characteristic isotopic shifts in the spectra of deuterated triangular [4]phenylenes. Two CC stretching modes, at 100 cm–1 and 1176 cm–1, suitable as probes for bond strength changes in the excited state, were identified. The isotope effect on the internal conversion rates of triangular [4]phenylene was evaluated from measurements of temperature dependent lifetime. Isotope dependency and the magnitude of the internal conversion rates indicate that internal conversion in triangular [4]phenylene is most likely induced by CH vibrations. The results obtained by LESS and lifetime measurements were compared with PM3 PECI calculations of the excited state structure. The theoretical results and the relation between ground and excited state vibration energies of the 1176 cm–1 probe vibration indicate a reduction of bond alternation of the central cyclohexatriene ring in the excited state.
The performance of a home-built tunable diode laser (TDL) spectrometer, aimed at multi-line detection of carbon dioxide, has been evaluated and optimized. In the regime of the (30<SUP>0</SUP>1)<SUB>III</SUB> / (000) band of <SUP>12</SUP>CO<SUB>2</SUB> around 1.6 μm, the dominating isotope species <SUP>12</SUP>CO<SUB>2</SUB>, <SUP>13</SUP>CO<SUB>2</SUB>, and <SUP>12</SUP>C<SUP>18</SUP>O<SUP>16</SUP>O were detected simultaneously without interference by water vapor. Detection limits in the range of few ppmv were obtained for each species utilizing wavelength modulation (WM) spectroscopy with balanced detection in a long-path absorption cell set-up. High sensitivity in conjunction with high precision —typically ±1‰ and ±6‰ for 3% and 0.7% of CO<SUB>2</SUB>, respectively— renders this experimental approach a promising analytical concept for isotope-ratio determination of carbon dioxide in soil and breath gas. For a moderate <SUP>12</SUP>CO<SUB>2</SUB> line, the pressure dependence of the line profile was characterized in detail, to account for pressure effects on sensitive measurements.
The performance of a home-built tunable diode laser (TDL) spectrometer has been optimized regarding multi-line detection of carbon dioxide in natural gases. In the regime of the (30<SUP>0</SUP>1)<SUB>III</SUB> ← (000) band of <SUP>12</SUP>CO<SUB>2</SUB> around 1.6 μm, the dominating isotope species <SUP>12</SUP>CO<SUB>2</SUB>, <SUP>13</SUP>CO<SUB>2</SUB>, and <SUP>12</SUP>C<SUP>18</SUP>O<SUP>16</SUP>O were detected simultaneously. In contrast to most established techniques, selective measurements are performed without any sample preparation. This is possible since the CO<SUB>2</SUB> detection is free of interference from water, ubiquitous in natural gases. Detection limits in the range of a few ppmv were obtained for each species utilizing wavelength modulation (WM) spectroscopy with balanced detection in a long-path absorption cell set-up. Linear calibration plots cover a dynamic range of four orders of magnitude, allowing for quantitative CO<SUB>2</SUB> detection in various samples, like soil and breath gas. High isotopic resolution enables the excellent selectivity, sensitivity, and stability of the chosen analytical concept. The obtained isotopic resolution of typically ± 1.0 ‰ and ± 1.5 ‰ (for 3 vol. % and 0.7 vol. % of CO<SUB>2</SUB>, respectively) offers a promising analytical tool for isotope-ratio determination of carbon dioxide in soil gas. Preliminary experiments on soil respiration for the first time combine the on-line quantification of the overall carbon dioxide content with an optode sensor and isotopic determination (TDL system) of natural gas species.
In dieser Arbeit wird ein chemisches Abgussverfahren für selbstorganisierte Strukturen in Lösung verwendet, das es ermöglicht definierte poröse Materialien mit Strukturierung auf der Nanometerskala herzustellen. Ähnlich wie beim Gussverfahren von Werkstücken wird die Vorlage durch ein geeignetes Material abgebildet. Durch Entfernen dieser Vorlage erhält man ein poröses (mit Hohlräumen durchsetztes) Negativ derselben. Die auf diese Weise erhaltenen Materialien sind in mehrerer Hinsicht interessant: So lassen sich aus ihrer Morphologie Rückschlüsse über die Natur der selbstorganisierten Strukturen erhalten, da der hier verwendete Abbildungsprozess selbst kleinste strukturelle Details erfasst. Die Hohlräume der synthetisierten porösen Stoffe hingegen können als winzige Reaktionsgefäße, sogenannte "Nano-Reaktoren" verwendet werden. Dies ermöglicht sowohl die Synthese von Nano-Partikeln, die auf anderem Wege nicht zugänglich sind, als auch die Möglichkeit Einflüsse der räumlichen Restriktion auf die Reaktion zu untersuchen. Besonders räumlich ausgedehnte Strukturen sollten hierbei Auffälligkeiten zeigen. Somit ist die Gliederung der Arbeit vorgegeben: - Die Herstellung und Charakterisierung von porösen Stoffen und selbstorganisierten Strukturen - Ihre Verwendung als "Nano-Reaktor"
Neue Einflüsse und Anwendungen von Mikrowellenstrahlung auf Miniemulsionen und ihre Kompositpolymere
(2004)
Miniemulsionen bestehen aus zwei miteinander nicht mischbaren Flüssigkeiten, von der die eine in Form kleiner Tröpfchen fein in der anderen verteilt (dispergiert) ist. Miniemulsionströpfchen sind mit Durchmessern von ungefähr 0,1 Mikrometer kleiner als herkömmliche Emulsionen und können u. a. als voneinander unabhängige Nanoreaktoren für chemische Reaktionen verwendet werden. Man unterteilt sie in direkte Miniemulsionen, in denen ein Öl in Wasser dispergiert ist, und inverse Miniemulsionen, in denen Wasser in Öl dispergiert wird. In dieser Arbeit wird das besondere chemische und physikalische Verhalten solcher Miniemulsionen unter dem Einfluß von Mikrowellenstrahlung untersucht. Dabei werden sowohl für Öl-in-Wasser als auch für Wasser-in-Öl-Miniemulsionen grundlagenwissenschaftliche Entdeckungen beschrieben und durch neue Modelle erklärt. Der praktische Nutzen dieser bislang unbeschriebenen Effekte wird durch ingenieurwissenschaftliche Anwendungsbeispiele im Bereich der Polymerchemie verdeutlicht. 1. Polymerisation mit "überlebenden Radikalen" (Surviving Radical Polymerization) Für die Herstellung von sog. Polymerlatizes (Kunststoffdispersionen, wie sie u. a. für Farben verwendet werden) aus direkten Styrol-in-Wasser Miniemulsionen werden die Styroltröpfchen als Nanoreaktoren verwendet: Sie werden mit Hilfe von Radikalen durch eine Kettenreaktion zu winzigen Polymerpartikeln umgesetzt, die im Wasser dispergiert sind. Ihre Materialeigenschaften hängen stark von der Kettenlänge der Polymermoleküle ab. In dieser Arbeit konnten durch den Einsatz von Mikrowellenstrahlung erstmals große Mengen an Radikalen erzeugt werden, die jeweils einzeln in Tröpfchen (Nanoreaktoren) auch noch lange Zeit nach dem Verlassen der Mikrowelle überleben und eine Polymerisationskettenreaktion ausführen können. Diese Methode ermöglicht nicht nur die Herstellung von Polymeren in technisch zuvor unerreichbaren Kettenlängen, mit ihr sind auch enorm hohe Umsätze nach sehr kurzen Verweilzeiten in der Mikrowelle möglich – denn die eigentliche Reaktion findet außerhalb statt. Es konnte gezeigt werden, dass durch Einsatz von Zusatzstoffen bei unvermindert hohem Umsatz die Polymerkettenlänge variiert werden kann. Die technischen Vorzüge dieses Verfahrens konnten in einer kontinuierlich betriebenen Pilotanlage nachgewiesen werden. 2. Aufheizverhalten inverser Miniemulsionen in Mikrowellenöfen Das Aufheizverhalen von Wasser-in-Öl Miniemulsionen mit kleinen Durchmessern durch Mikrowellen ist überaus träge, da sich nur das wenige Wasser in den Tröpfchen mit Mikrowellen aufheizen lässt, das Öl jedoch kaum. Solche Systeme verhalten sich gemäß der "Theorie des effektiven Mediums". Werden aber etwas größere Tröpfchen im Mikrometerbereich Mikrowellen ausgesetzt, so konnte eine wesentlich schnellere Aufheizung beobachtet werden, die auf eine Maxwell-Wagner-Grenzflächenpolarisation zurückgeführt werden kann. Die Größenabhängigkeit dieses Effekts wurde mit Hilfe der dielektrischen Spektroskopie quantifiziert und ist bislang in der Literatur nie beschrieben worden. Zur genauen Messung dieses Effekts und zu seiner technischen Nutzung wurde ein neuartiges Membranverfahren für die Herstellung von großen Miniemulsionströpfchen im Mikrometerbereich entwickelt. 3. Herstellung von Kompositpolymeren für Mikrowellenanwendungen Um die untersuchte Maxwell-Wagner-Grenzflächenpolarisation technisch nutzen zu können, wurden als dafür geeignete Materialien Kompositpolymere hergestellt. Das sind Kunststoffe, in denen winzige Wassertropfen oder Keramikpartikel eingeschlossen sind. Dazu wurden neuartige Synthesewege auf der Grundlage der Miniemulsionstechnik entwickelt. Ihr gemeinsames Ziel ist die Einschränkung der üblicherweise bei Polymerisation auftretenden Entmischung: In einem Verfahren wurde durch Gelierung die Beweglichkeit der emulgierten Wassertröpfchen eingeschränkt, in einem anderen wurde durch das Einschließen von Keramikpartikeln in Miniemulsionströpfchen die Entmischung auf deren Größe beschränkt. Anwendungen solcher Kompositpolymere könnten künstliche Muskeln, die Absorption von Radarstrahlung, z. B. für Tarnkappenflugzeuge, oder kratzfeste Lacke sein.Bei diesen Experimenten wurde beobachtet, daß sich u. U. in der Miniemulsion große Tröpfchen bilden. Ihr Ursprung wird mit einer neuen Modellvorstellung erklärt, die die Einflüsse auf die Stabilität von Miniemulsionen beschreibt.
New chain transfer agents based on dithiobenzoate and trithiocarbonate for free radical polymerization via Reversible Addition-Fragmentation chain Transfer (RAFT) were synthesized. The new compounds bear permanently hydrophilic sulfonate moieties which provide solubility in water independent of the pH. One of them bears a fluorophore, enabling unsymmetrical double end group labelling as well as the preparation of fluorescent labeled polymers. Their stability against hydrolysis in water was studied, and compared with the most frequently employed water-soluble RAFT agent 4-cyano-4-thiobenzoylsulfanylpentanoic acid dithiobenzoate, using UV-Vis and 1H-NMR spectroscopy. An improved resistance to hydrolysis was found for the new RAFT agents, providing good stabilities in the pH range between 1 and 8, and up to temperatures of 70°C. Subsequently, a series of non-ionic, anionic and cationic water-soluble monomers were polymerized via RAFT in water. In these experiments, polymerizations were conducted either at 48°C or 55°C, that are lower than the conventionally employed temperatures (>60°C) for RAFT in organic solvents, in order to minimize hydrolysis of the active chain ends (e.g. dithioester and trithiocarbonate), and thus to obtain good control over the polymerization. Under these conditions, controlled polymerization in aqueous solution was possible with styrenic, acrylic and methacrylic monomers: molar masses increase with conversion, polydispersities are low, and the degree of end group functionalization is high. But polymerizations of methacrylamides were slow at temperatures below 60°C, and showed only moderate control. The RAFT process in water was also proved to be a powerful method to synthesize di- and triblock copolymers including the preparation of functional polymers with complex structure, such as amphiphilic and stimuli-sensitive block copolymers. These include polymers containing one or even two stimuli-sensitive hydrophilic blocks. The hydrophilic character of a single or of several blocks was switched by changing the pH, the temperature or the salt content, to demonstrate the variability of the molecular designs suited for stimuli-sensitive polymeric amphiphiles, and to exemplify the concept of multiple-sensitive systems. Furthermore, stable colloidal block ionomer complexes were prepared by mixing anionic surfactants in aqueous media with a double hydrophilic block copolymer synthesized via RAFT in water. The block copolymer is composed of a noncharged hydrophilic block based on polyethyleneglycol and a cationic block. The complexes prepared with perfluoro decanoate were found so stable that they even withstand dialysis; notably they do not denaturate proteins. So, they are potentially useful for biomedical applications in vivo.
Taking inspiration from nature, where composite materials made of a polymer matrix and inorganic fillers are often found, e.g. bone, shell of crustaceans, shell of eggs, etc., the feasibility on making composite materials containing chitosan and nanosized hydroxyapatite were investigated. A new preparation approach based on a co-precipitation method has been developed. In its earlier stage of formation, the composite occurs as hydrogel as suspended in aqueous alkaline solution. In order to get solid composites various drying procedures including freeze-drying technique, air-drying at room temperature and at moderate temperatures, between 50oC and 100oC were used. Physicochemical studies showed that the composites exhibit different properties with respect to their structure and composition. IR and Raman spectroscopy probed the presence of both chitosan and hydroxyapatite in the composites. Hydroxyapatite as dispersed in the chitosan matrix was found to be in the nanosize range (15-50 nm) and occurs in a bimodal distribution with respect to its crystallite length. Two types of distribution domains of hydroxyapatite crystallites in the composite matrix such as cluster-like (200-400 nm) and scattered-like domains were identified by the transmission electron microscopy (TEM), X-ray diffraction (XRD) and by confocal scanning laser microscopy (CSLM) measurements. Relaxation NMR experiments on composite hydrogels showed the presence of two types of water sites in their gel networks, such as free and bound water. Mechanical tests showed that the mechanical properties of composites are one order of magnitude less than those of compact bone but comparable to those of porous bone. The enzymatic degradation rates of composites showed slow degradation processes. The yields of degradation were estimated to be less than 10% by loss of mass, after incubation with lysozyme, for a period of 50 days. Since the composite materials were found biocompatible by the in vivo tests, the simple mode of their fabrication and their properties recommend them as potential candidates for the non-load bearing bone substitute materials.
Gegenstand der Arbeit ist die lichtinduzierte Orientierung von multifunktionalen Polymeren, die u.a. für die Herstellung von optischen Schichten in Flüssigkristalldisplays verwendet werden können. Dafür wurden Polymere entwickelt, die wenigstens eine mesogene und eine lichtsensitive Gruppe enthalten. Diese Gruppen zeigen Eigenschaften, die für die Orientierung der kompletten Polymerfilme verantwortlich sind. Das Material wird dafür zunächst in einem ersten Schritt kurz mit linear polarisiertem Licht bestrahlt, wobei richtungsabhängig eine photochemische Reaktion an der lichtsensitiven Gruppe erfolgt und dadurch ein "Orientierungskeim" gelegt wird. Durch die thermische Ausrichtung der mesogenen Gruppen an den photochemisch generierten "Orientierungskeimen" erfolgt die komplette Orientierung des Filmes in einem zweiten Schritt. Dadurch wird eine hohe optische Anisotropie erhalten. Dieses Verfahren wurde als Zwei-Stufen-Bulk-Orientierungsprozess bezeichnet. In der vorliegenden Arbeit wurden die Photoreaktionen verschiedener lichtsensitiver Gruppen, wie z. B. Azobenzen, Stilben und Zimtsäureester und deren Orientierungsfähigkeit in flüssigkristallinen Polymeren untersucht. Der Orientierungsprozess wurde durch die Wahl geeigneter Bestrahlungsbedingungen optimiert. Die Effizienz der Orientierung wurde anhand der sich verändernden winkelabhängigen Absorptionseigenschaften und der Doppelbrechung des Materials analysiert. Es wurde gezeigt, dass eine effiziente lichtinduzierte Orientierung bei einer Vielzahl von flüssigkristallinen Polymeren realisierbar ist. So wurde z. B. erstmalig gefunden, dass durch eine Photo-Fries-Orientierung eine hohe optische Anisotropie erhalten werden kann. Außerdem wurde eine neue lichtsensitive Gruppe auf der Basis von Donor-Akzeptor-substituiertem Ethen entwickelt, die farbneutral ist und durch polarisiertes UV-Licht sowohl orientiert als auch re-orientiert werden kann. Es wurden weiterhin Polymere entwickelt, die zusätzlich zu den photosensitiven und flüssigkristallinen Einheiten, fluoreszierende Gruppen enthalten. Die Auswahl geeigneter Fluoreszenzverbindungen erfolgte aufgrund ihrer anisometrischen Form, ihrer Ordnungsparameter in einer niedermolekularen Flüssigkristallmischung und ihrer Photostabilität. Das Orientierungsverhalten von ausgewählten Fluorophoren wurde in sechs Ter- und zwei Copolymeren untersucht. Das Prinzip der Orientierung beruht auf einer kooperativen Ausrichtung der Seitengruppen. Aus diesem Grund kommt dem Nachweis der Kooperativität in der vorliegenden Arbeit eine besondere Stellung zu. Durch lichtinduzierte Bulk-Orientierung wurden Filme erhalten, welche durch eine richtungsabhängige Fluoreszenz und Absorption im sichtbaren- oder UV-Bereich charakterisiert sind. Die Fluoreszenz wird durch einige lichtsensitive Verbindungen komplett gelöscht. Die wahlweise erhaltenen anisotropen Filme von farbigen, fluoreszierenden oder farbneutralen Verbindungen, die zudem in kleinen Pixeln von wenigen Mikrometern orientiert werden können, eröffnen vielfältige Möglichkeiten für den Einsatz von multi-funktionalen Polymeren als optische Schichten in Flüssigkristalldisplays.
The goal of this work was to study the binding of ions to polymers and lipid bilayer membranes in aqueous solutions. In the first part of this work, the influence of various inorganic salts and polyelectrolytes on the structure of water was studied using Isothermal Titration Calorimetry (ITC). The heat of dilution of the salts was used as a scale of water structure making and breaking of the ions. The heats of dilution could be attributed to the Hofmeister Series. Following this, the binding of Ca2+ to poly(sodium acrylate) (NaPAA) was studied. ITC and a Ca2+ Ion Selective Electrode were used to measure the reaction enthalpy and binding isotherm. Binding of Ca2+ ions to PAA, was found to be highly endothermic and therefore solely driven by entropy. We then compared the binding of ions to the one-dimensional PAA polymer chain to the binding to lipid vesicles with the same functional groups. As for the polymer, Ca2+ binding was found to be endothermic. Binding of calcium to the lipid bilayer was found to be weaker than to the polymer. In the context of these experiments, it was shown that Ca2+ not only binds to charged but also to zwitterionic lipid vesicles. Finally, we studied the interaction of two salts, KCl and NaCl, to a neutral polymer gel, PNIPAAM, and to the ionic polymer PAA. Combining calorimetry and a potassium selective electrode we observed that the ions interact with both polymers, whether containing charges or not.