Refine
Has Fulltext
- no (140)
Year of publication
- 2013 (140) (remove)
Document Type
- Article (140) (remove)
Language
- English (140)
Is part of the Bibliography
- yes (140)
Keywords
- Climate change (4)
- Land use change (4)
- Iran (3)
- exhumation (3)
- Alborz Mountains (2)
- Asian monsoon (2)
- Earthquake source observations (2)
- Geostatistics (2)
- Holocene (2)
- Mountain basins (2)
Institute
- Institut für Geowissenschaften (140) (remove)
Pseudotachylyte veins frequently associated with mylonites and ultramylonites occur within migmatitic paragneisses, metamonzodiorites, as well as felsic and mafic granulites at the base of the section of the Hercynian lower crust exposed in Calabria (Southern Italy). The crustal section is tectonically superposed on lower grade units. Ultramylonites and pseudotachylytes are particularly well developed in migmatitic paragneisses, whereas sparse fault-related pseudotachylytes and thin mylonite/ultramylonite bands occur in granulite-facies rocks. The presence of sillimanite and clinopyroxene in ultramylonites and mylonites indicates that relatively high-temperature conditions preceded the formation of pseudotachylytes. We have analysed pseudotachylytes from different rock types to ascertain their deep crustal origin and to better understand the relationships between brittle and ductile processes during deformation of the deeper crust. Different protoliths were selected to test how lithology controls pseudotachylyte composition and textures. In migmatites and felsic granulites, euhedral or cauliflower-shaped garnets directly crystallized from pseudotachylyte melts of near andesitic composition. This indicates that pseudotachylytes originated at deep crustal conditions (> 0.75 GPa). In mafic protoliths, quenched needle-to-feather-shaped high-alumina orthopyroxene occurs in contact with newly crystallized plagioclase. The pyroxene crystallizes in garnet-free and garnet-bearing veins. The simultaneous growth of orthopyroxene and plagioclase as well as almandine, suggests lower crustal origin, with pressures in excess of 0.85 GPa. The existence of melts of different composition in the same vein indicates the stepwise, non-equilibrium conditions of frictional melting. Melt formed and intruded into pre-existing anisotropies. In mafic granulites, brittle faulting is localized in a previously formed thin high-temperature mylonite bands. migmatitic gneisses are deformed into ultramylonite domains characterized by s-c fabric. Small grain size and fluids lowered the effective stress on the c planes favouring a seismic event and the consequent melt generation. Microstructures and ductile deformation of pseudotachylytes suggest continuous ductile flow punctuated by episodes of high-strain rate, leading to seismic events and melting.
Considerable effort has been devoted to the development of simulation algorithms for facies modeling, whereas a discussion of how to combine those techniques has not existed. The integration of multiple geologic data into a three-dimensional model, which requires the combination of simulation techniques, is yet a current challenge for reservoir modeling. This article presents a thought process that guides the acquisition and modeling of geologic data at various scales. Our work is based on outcrop data collected from a Jurassic carbonate ramp located in the High Atlas mountain range of Morocco. The study window is 1 km (0.6 mi) wide and 100 m (328.1 ft) thick. We describe and model the spatial and hierarchical arrangement of carbonate bodies spanning from largest to smallest: (1) stacking pattern of high-frequency depositional sequences, (2) facies association, and (3) lithofacies. Five sequence boundaries were modeled using differential global position system mapping and light detection and ranging data. The surface-based model shows a low-angle profile with modest paleotopographic relief at the inner-to-middle ramp transition. Facies associations were populated using truncated Gaussian simulation to preserve ordered trends between the inner, middle, and outer ramps. At the lithofacies scale, field observations and statistical analysis show a mosaiclike distribution that was simulated using a fully stochastic approach with sequential indicator simulation.
This study observes that the use of one single simulation technique is unlikely to correctly model the natural patterns and variability of carbonate rocks. The selection and implementation of different techniques customized for each level of the stratigraphic hierarchy will provide the essential computing flexibility to model carbonate settings. This study demonstrates that a scale-dependent modeling approach should be a common procedure when building subsurface and outcrop models.
Palaeoenvironmental implications of evaporative gaylussite crystals from Lonar Lake, central India
(2013)
We have undertaken petrographic, mineralogical, geochemical and isotopic investigations on carbonate minerals found within a 10-m-long core from Lonar Lake, central India, with the aim of evaluating their potential as palaeoenvironmental proxies. The core encompasses the entire Holocene and is the first well-dated high-resolution record from central India. While calcite and/or aragonite were found throughout the core, the mineral gaylussite was found only in two specific intervals (46303890 and 2040560 cal a BP). Hydrochemical and isotope data from inflowing streams and lake waters indicate that evaporitic processes play a dominant role in the precipitation of carbonates within this lake. Isotopic (18O and 13C) studies on the evaporative gaylussite crystals and residual bulk carbonates (calcite) from the long core show that evaporation is the major control on 18O enrichment in both the minerals. However, in case of 13C additional mechanisms, for example methanogenesis (gaylussite) and phytoplankton productivity (calcium carbonate), play an additional important role in some intervals. We also discuss the relevance of our investigation for palaeoclimate reconstruction and late Holocene monsoon variability.
We have undertaken a high resolution palaeoclimate reconstruction on radiocarbon dated palaeolake sediments from the Spiti valley, NW Himalaya. This site lies in the climatically sensitive winter westerlies and Indian Summer Monsoon (ISM) transitional regime and provides an opportunity to reconstruct the precipitation seasonality, and extreme precipitation events that are characterised by intensified erosion. The lake sediments reveal distinct lithofacies that provide evidence of changes in depositional environment and climate during early to mid Holocene (8.7-6.1 cal ka BP). We have identified three stages during the period of lake's existence: the Stage I (8.7-7.6 cal ka BP) is marked by lake establishment; Stage II (similar to 7.6-6.8 cal ka BP) by sustained cooler periods and weakened summer monsoon, and Stage III (similar to 6.8-6.1 cal ka BP) by a shift from colder to warmer climate with stronger ISM. We have identified several short term cooler periods at ca. 8.7, 8.5, 8.3 and 7.2-6.9 cal ka BP. Based on an overview of regional climate records we show that there is an abrupt switch in precipitation seasonality ca. 6.8 cal ka BP that is followed by the onset of the intensified monsoon in the NW Himalaya. (C) 2013 Elsevier Ltd and INQUA. All rights reserved.
With this paper, we assess the present-day conductive thermal field of the Glueckstadt Graben in NW Germany that is characterized by large salt walls and diapirs structuring the graben fill. We use a finite element method to calculate the 3D steady-state conductive thermal field based on a lithosphere-scale 3D structural model that resolves the first-order structural characteristics of the graben and its underlying lithosphere. Model predictions are validated against measured temperatures in six deep wells. Our investigations show that the interaction of thickness distributions and thermal rock properties of the different geological layers is of major importance for the distribution of temperatures in the deep subsurface of the Glueckstadt Graben. However, the local temperatures may result from the superposed effects of different controlling factors. Especially, the upper sedimentary part of the model exhibits huge lateral temperature variations, which correlate spatially with the shape of the thermally highly conductive Permian salt layer. Variations in thickness and geometry of the salt cause two major effects, which provoke considerable lateral temperature variations for a given depth. (1) The "chimney effect" causes more efficient heat transport within salt diapirs. As a consequence positive thermal anomalies develop in the upper part and above salt structures, where the latter are covered by much less conductive sediments. In contrast, negative thermal anomalies are noticeable underneath salt structures. (2) The "thermal blanketing effect" is caused by thermally low conductive sediments that provoke the local storage of heat where these insulating sediments are present. The latter effect leads to both local and regional thermal anomalies. Locally, this translates to higher temperatures where salt margin synclines are filled with thick insulating clastic sediments. For the regional anomalies the cumulative insulating effects of the entire sediment fill results in a long-wavelength variation of temperatures in response to heat refraction effects caused by the contrast between insulating sediments and highly conductive crystalline crust. Finally, the longest wavelength of temperature variations is caused by the depth position of the isothermal lithosphere-asthenosphere boundary defining the regional variations of the overall geothermal gradient. We find that a conductive thermal model predicts observed temperatures reasonably well for five of the six available wells, whereas the steady-state conductive approach appears not to be valid for the sixth well.
Soil moisture dynamics are affected by complex interactions among several factors. Understanding the relative importance of these factors is still an important challenge in the study of water fluxes and solute transport in unsaturated media. In this study, the spatio-temporal variability of surface soil moisture was investigated in a 10 ha flat cropped field located in northern Italy. Soil moisture was measured on a regular 50 x 50 m grid on seven dates during the growing season. For each measurement campaign, the spatial variability of the soil moisture was compared with the spatial variability of the soil texture and crop properties. In particular, to better understand the role of the vegetation, the spatio-temporal variability of two different parameters - leaf area index and crop height - was monitored on eight dates at different crop development stages. Statistical and geostatistical analysis was then applied to explore the interactions between these variables. In agreement with other studies, the results show that the soil moisture variability changes according to the average value within the field, with the standard deviation reaching a maximum value under intermediate mean soil moisture conditions and the coefficient of variation decreasing exponentially with increasing mean soil moisture. The controls of soil moisture variability change according to the average soil moisture within the field. Under wet conditions, the spatial distribution of the soil moisture reflects the variability of the soil texture. Under dry conditions, the spatial distribution of the soil moisture is affected mostly by the spatial variability of the vegetation. The interaction between these two factors is more important under intermediate soil moisture conditions. These results confirm the importance of considering the average soil moisture conditions within a field when investigating the controls affecting the spatial variability of soil moisture. This study highlights the importance of considering the spatio-temporal variability of the vegetation in investigating soil moisture dynamics, especially under intermediate and dry soil moisture conditions. The results of this study have important implications in different hydrological applications, such as for sampling design, ranking stability application, indirect measurements of soil properties and model parameterisation.
The spatial distribution of soil types is controlled by a set of environmental factors such as climate, organisms, parent material and topography as well as time and space. A change of these factors will lead to a change in the spatial distribution of soil types. In this study, we use a digital soil mapping approach to improve our knowledge about major soil type distributing factors in the steppe regions of Inner Mongolia (China) which currently undergo tremendous environmental change, e.g. climate and land use change. We use Random Forests in an effort to map Reference Soil Groups according to the World Reference Base for Soil Resources (WRB) in the Xilin River catchment. We benefit from the superior prediction capabilities of RF and additional interpretive results in order to identify the major environmental factors that control spatial patterns of soil types. The nine WRB soil groups that were identified and spatially predicted for the study area are Arenosol, Calcisol, Cambisol, Chernozem, Cryosol, Gleysol, Kastanozem, Phaeozem and Regosol.
Model and prediction performances of the RF model are high with an Out-of-Bag error of 51.6% for the model and a misclassification error for the predicted map of 28.9%. The main controlling factors of soil type distribution are land use, a set of topographic variables, geology and climate. However, land use and climate are of major importance and topography and geology are of minor importance. The visualizations of the predictions, the variable importance measures as result of RF and the comparisons of these with the spatial distribution of the environmental factors delivered additional, quantitative information of these controlling factors and revealed that intensively grazed areas are subjected to soil degradation. However, most of the area is still governed by natural soil forming processes which are driven by climate, topography and geology. Most importantly though, our study revealed that a shift towards warmer temperatures and lower precipitation regimes will lead to a change of the spatial distribution of RSGs towards steppe soils that store less carbon, i.e. a decrease of spatial extent of Phaeozems and an increase of spatial extent of Chernozems and Kastanozems.
Beta diversity is a conceptual link between diversity at local and regional scales. Various additional methodologies of quantifying this and related phenomena have been applied. Among them, measures of pairwise (dis)similarity of sites are particularly popular. Undersampling, i.e. not recording all taxa present at a site, is a common situation in ecological data. Bias in many metrics related to beta diversity must be expected, but only few studies have explicitly investigated the properties of various measures under undersampling conditions. On the basis of an empirical data set, representing near-complete local inventories of the Lepidoptera from an isolated Pacific island, as well as simulated communities with varying properties, we mimicked different levels of undersampling. We used 14 different approaches to quantify beta diversity, among them dataset-wide multiplicative partitioning (i.e. true beta diversity') and pairwise site x site dissimilarities. We compared their values from incomplete samples to true results from the full data. We used these comparisons to quantify undersampling bias and we calculated correlations of the dissimilarity measures of undersampled data with complete data of sites. Almost all tested metrics showed bias and low correlations under moderate to severe undersampling conditions (as well as deteriorating precision, i.e. large chance effects on results). Measures that used only species incidence were very sensitive to undersampling, while abundance-based metrics with high dependency on the distribution of the most common taxa were particularly robust. Simulated data showed sensitivity of results to the abundance distribution, confirming that data sets of high evenness and/or the application of metrics that are strongly affected by rare species are particularly sensitive to undersampling. The class of beta measure to be used should depend on the research question being asked as different metrics can lead to quite different conclusions even without undersampling effects. For each class of metric, there is a trade-off between robustness to undersampling and sensitivity to rare species. In consequence, using incidence-based metrics carries a particular risk of false conclusions when undersampled data are involved. Developing bias corrections for such metrics would be desirable.
The Acheulean technological tradition, characterized by a large (>10 cm) flake-based component, represents a significant technological advance over the Oldowan. Although stone tool assemblages attributed to the Acheulean have been reported from as early as circa 1.6-1.75 Ma, the characteristics of these earliest occurrences and comparisons with later assemblages have not been reported in detail. Here, we provide a newly established chronometric calibration for the Acheulean assemblages of the Konso Formation, southern Ethiopia, which span the time period similar to 1.75 to <1.0 Ma. The earliest Konso Acheulean is chronologically indistinguishable from the assemblage recently published as the world's earliest with an age of similar to 1.75 Ma at Kokiselei, west of Lake Turkana, Kenya. This Konso assemblage is characterized by a combination of large picks and crude bifaces/unifaces made predominantly on large flake blanks. An increase in the number of flake scars was observed within the Konso Formation handaxe assemblages through time, but this was less so with picks. The Konso evidence suggests that both picks and handaxes were essential components of the Acheulean from its initial stages and that the two probably differed in function. The temporal refinement seen, especially in the handaxe forms at Konso, implies enhanced function through time, perhaps in processing carcasses with long and stable cutting edges. The documentation of the earliest Acheulean at similar to 1.75 Ma in both northern Kenya and southern Ethiopia suggests that behavioral novelties were being established in a regional scale at that time, paralleling the emergence of Homo erectus-like hominid morphology.
Any understanding of sediment routing from mountain belts to their forelands and offshore sinks remains incomplete without estimates of intermediate storage that decisively buffers sediment yields from erosion rates, attenuates water and sediment fluxes, and protects underlying bedrock from incision. We quantify for the first time the sediment stored in > 38000 mainly postglacial Himalayan valley fills, based on an empirical volume-area scaling of valley-fill outlines automatically extracted from digital topographic data. The estimated total volume of 690(+452/-242) km(3) is mostly contained in few large valley fills > 1 km(3), while catastrophic mass wasting adds another 177(31) km(3). Sediment storage volumes are highly disparate along the strike of the orogen. Much of the Himalaya's stock of sediment is sequestered in glacially scoured valleys that provide accommodation space for similar to 44% of the total volume upstream of the rapidly exhuming and incising syntaxes. Conversely, the step-like long-wave topography of the central Himalayas limits glacier extent, and thus any significant glacier-derived storage of sediment away from tectonic basins. We show that exclusive removal of Himalayan valley fills could nourish contemporary sediment flux from the Indus and Brahmaputra basins for > 1 kyr, though individual fills may attain residence times of > 100 kyr. These millennial lag times in the Himalayan sediment routing system may sufficiently buffer signals of short-term seismic as well as climatic disturbances, thus complicating simple correlation and interpretation of sedimentary archives from the Himalayan orogen, its foreland, and its submarine fan systems. (C) 2013 Elsevier B.V. All rights reserved.