Refine
Has Fulltext
- yes (714) (remove)
Year of publication
Document Type
- Doctoral Thesis (406)
- Postprint (136)
- Article (88)
- Preprint (35)
- Habilitation Thesis (21)
- Conference Proceeding (11)
- Master's Thesis (11)
- Monograph/Edited Volume (3)
- Course Material (2)
- Bachelor Thesis (1)
Keywords
- Synchronisation (19)
- diffusion (19)
- data analysis (13)
- synchronization (13)
- Datenanalyse (12)
- Klimawandel (10)
- Nichtlineare Dynamik (10)
- anomalous diffusion (10)
- Spektroskopie (9)
- Synchronization (9)
Institute
- Institut für Physik und Astronomie (714) (remove)
In a network with a mixture of different electrophysiological types of neurons linked by excitatory and inhibitory connections, temporal evolution leads through repeated epochs of intensive global activity separated by intervals with low activity level. This behavior mimics "up" and "down" states, experimentally observed in cortical tissues in absence of external stimuli. We interpret global dynamical features in terms of individual dynamics of the neurons. In particular, we observe that the crucial role both in interruption and in resumption of global activity is played by distributions of the membrane recovery variable within the network. We also demonstrate that the behavior of neurons is more influenced by their presynaptic environment in the network than by their formal types, assigned in accordance with their response to constant current.
To understand the evolution and morphology of planetary nebulae, a detailed knowledge of their central stars is required. Central stars that exhibit emission lines in their spectra, indicating stellar mass-loss allow to study the evolution of planetary nebulae in action. Emission line central stars constitute about 10 % of all central stars. Half of them are practically hydrogen-free Wolf-Rayet type central stars of the carbon sequence, [WC], that show strong emission lines of carbon and oxygen in their spectra. In this contribution we address the weak emission-lines central stars (wels). These stars are poorly analyzed and their hydrogen content is mostly unknown. We obtained optical spectra, that include the important Balmer lines of hydrogen, for four weak emission line central stars. We present the results of our analysis, provide spectral classification and discuss possible explanations for their formation and evolution.
While there is strong evidence for clumping in the winds of massive hot stars, very little is known about clumping in the winds from Central Stars. We have checked [WC]-type CSPN winds for clumping by inspecting the electron-scattering line wings. At least for three stars we found indications for wind inhomogeneities.
A significant number of the central stars of planetary nebulae (CSPNe) are hydrogen-deficient, showing a chemical composition of helium, carbon, and oxygen. Most of them exhibit Wolf-Rayet-like emission line spectra, similar to those of the massive WC Pop I stars, and are therefore classified as of spectral type [WC]. In the last years, CSPNe of other Wolf-Rayet spectral subtypes have been identified, namely PB 8, which is of spectral type [WN/C], and IC 4663 and Abell 48, which are of spectral type [WN]. We review spectral analyses of Wolf-Rayet type central stars of different evolutionary stages and discuss the results in the context of stellar evolution. Especially we consider the question of a common evolutionary channel for [WC] stars. The constraints on the formation of [WN] or [WC/N] subtype stars will also be addressed.
Central stars of planetary nebulae are low-mass stars on the brink of their final evolution towards white dwarfs. Because of their surface temperature of above 25,000 K their UV radiation ionizes the surrounding material, which was ejected in an earlier phase of their evolution. Such fluorescent circumstellar gas is called a "Planetary Nebula". About one-tenth of the Galactic central stars are hydrogen-deficient. Generally, the surface of these central stars is a mixture of helium, carbon, and oxygen resulting from partial helium burning. Moreover, most of them have a strong stellar wind, similar to massive Pop-I Wolf-Rayet stars, and are in analogy classified as [WC]. The brackets distinguish the special type from the massive WC stars. Qualitative spectral analyses of [WC] stars lead to the assumption of an evolutionary sequence from the cooler, so-called late-type [WCL] stars to the very hot, early-type [WCE] stars. Quantitative analyses of the winds of [WC] stars became possible by means of computer programs that solve the radiative transfer in the co-moving frame, together with the statistical equilibrium equations for the population numbers. First analyses employing models without iron-line blanketing resulted in systematically different abundances for [WCL] and [WCE] stars. While the mass ratio of He:C is roughly 40:50 for [WCL] stars, it is 60:30 in average for [WCE] stars. The postulated evolution from [WCL] to [WCE] however could only lead to an increase of carbon, since heavier elements are built up by nuclear fusion. In the present work, improved models are used to re-analyze the [WCE] stars and to confirm their He:C abundance ratio. Refined models, calculated with the Potsdam WR model atmosphere code (PoWR), account now for line-blanketing due to iron group elements, small scale wind inhomogeneities, and complex model atoms for He, C, O, H, P, N, and Ne. Referring to stellar evolutionary models for the hydrogen-deficient [WC] stars, Ne and N abundances are of particular interest. Only one out of three different evolutionary channels, the VLTP scenario, leads to a Ne and N overabundance of a few percent by mass. A VLTP, a very late thermal pulse, is a rapid increase of the energy production of the helium-burning shell, while hydrogen burning has already ceased. Subsequently, the hydrogen envelope is mixed with deeper layers and completely burnt in the presence of C, He, and O. This results in the formation of N and Ne. A sample of eleven [WCE] stars has been analyzed. For three of them, PB 6, NGC 5189, and [S71d]3, a N overabundance of 1.5% has been found, while for three other [WCE] stars such high abundances of N can be excluded. In the case of NGC 5189, strong spectral lines of Ne can be reproduced qualitatively by our models. At present, the Ne mass fraction can only be roughly estimated from the Ne emission lines and seems to be in the order of a few percent by mass. Furthermore, using a diagnostic He-C line pair, the He:C abundance ratio of 60:30 for [WCE] stars is confirmed. Within the framework of the analysis, a new class of hydrogen-deficient central stars has been discovered, with PB 8 as its first member. Its atmospheric mixture resembles rather that of the massive WNL stars than of the [WC] stars. The determined mass fractions H:He:C:N:O are 40:55:1.3:2:1.3. As the wind of PB 8 contains significant amounts of O and C, in contrast to WN stars, a classification as [WN/WC] is suggested.
We discuss our most recent findings on the diffuse X-ray emission within Wolf-Rayet (WR) nebulae. The best-quality X-ray observations of these objects are those performed by XMM- Newton and Chandra towards S 308, NGC 2359, and NGC 6888. Even though these three WR nebulae might have different formation scenarios, they all share similar characteristics: i) the main plasma temperatures of the X-ray-emitting gas is found to be T =[1–2]×^K, ii) the diffuse X-ray emission is confined inside the [O iii] shell, and iii) their X-ray luminosities and electron densities in the 0.3–2.0 keV energy range are LX ≈10^33–10^34 erg s-1 and ne ≈0.1–1 cm^-3 . These properties and the nebular-like abundances of the hot gas suggest mixing and/or thermal conduction is taking an important rôle reducing the temperature of the hot bubble.
It is known that the efficiency of organic light-emitting devices (OLEDs) is strongly influenced by the ’quality′ of the thin films [1]. On the basis of this conviction, the work presented in this thesis aimed to obtain a better understanding of the structure of organic thin films of general interest in the field of organic light emitting devices by using scanning probe microscopies (SPMs). A not yet reported crystal structure of quaterthiophene film grown on potassium hydrogen (KHP) is determined by optical measurements, a simulation program, diffraction at both normal incidence and grazing angle and AFM. The crystal cell is triclinic with parameters a = 0.721 nm, b = 0.632 nm, c = 0.956 nm and a = 91°, b = 91.4°, g = 91° [2]. The morphologies of four organic thin films deposited on gold are characterized by ultra high vacuum scanning tunneling microscopy (UHV-STM). Terraces in an hexanethiol monolayer, lamellar structures in an azobenzenethiol monolayer, rods in a a poly(paraphenylenevinylene) oligomer film and a granular morphology in an oxadiazole film are shown. The topographies of a series of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) films deposited on indium-tin oxide (ITO) and gold obtained from dispersions with PEDOT:PSS weight ratios of 1:20, 1:6 and 1:1 are investigated by AFM. It is demonstrated that the films show the same topography on gold and on ITO. It is shown that the PEDOT films eliminate the spike features of ITO. It is reported that PEDOT 1:20 and 1:6 appear indistinguishable between each other but different from PEDOT 1:1 (the most conductive). Coupling STM and I-d measurements, a not yet reported structural model of PEDOT 1:1 on gold is obtained [3]. In this model the surface presents grains and the bulk particles/domains rich in PEDOT embedded in a PEDOT-poor matrix. The equation of conductivity is derived. A STM investigation of four PEDOT films deposited on ITO obtained from dispersions with the same PEDOT:PSS weight ratio of 1:1 is carried out [4]. The films differ either for the presence of sorbitol or for a different synthetic route (and they present different conductivities). For the first time a quantitative and qualitative correlation between the nanometer-scale morphology of PEDOT films with and without sorbitol and their conductivity is established.
Cosmic rays (CRs) are a ubiquitous and an important component of astrophysical environments such as the interstellar medium (ISM) and intracluster medium (ICM). Their plasma physical interactions with electromagnetic fields strongly influence their transport properties. Effective models which incorporate the microphysics of CR transport are needed to study the effects of CRs on their surrounding macrophysical media. Developing such models is challenging because of the conceptional, length-scale, and time-scale separation between the microscales of plasma physics and the macroscales of the environment. Hydrodynamical theories of CR transport achieve this by capturing the evolution of CR population in terms of statistical moments. In the well-established one-moment hydrodynamical model for CR transport, the dynamics of the entire CR population are described by a single statistical quantity such as the commonly used CR energy density. In this work, I develop a new hydrodynamical two-moment theory for CR transport that expands the well-established hydrodynamical model by including the CR energy flux as a second independent hydrodynamical quantity. I detail how this model accounts for the interaction between CRs and gyroresonant Alfvén waves. The small-scale magnetic fields associated with these Alfvén waves scatter CRs which fundamentally alters CR transport along large-scale magnetic field lines. This leads to the effects of CR streaming and diffusion which are both captured within the presented hydrodynamical theory. I use an Eddington-like approximation to close the hydrodynamical equations and investigate the accuracy of this closure-relation by comparing it to high-order approximations of CR transport. In addition, I develop a finite-volume scheme for the new hydrodynamical model and adapt it to the moving-mesh code Arepo. This scheme is applied using a simulation of a CR-driven galactic wind. I investigate how CRs launch the wind and perform a statistical analysis of CR transport properties inside the simulated circumgalactic medium (CGM). I show that the new hydrodynamical model can be used to explain the morphological appearance of a particular type of radio filamentary structures found inside the central molecular zone (CMZ). I argue that these harp-like features are synchrotron-radiating CRs which are injected into braided magnetic field lines by a point-like source such as a stellar wind of a massive star or a pulsar. Lastly, I present the finite-volume code Blinc that uses adaptive mesh refinement (AMR) techniques to perform simulations of radiation and magnetohydrodynamics (MHD). The mesh of Blinc is block-structured and represented in computer memory using a graph-based approach. I describe the implementation of the mesh graph and how a diffusion process is employed to achieve load balancing in parallel computing environments. Various test problems are used to verify the accuracy and robustness of the employed numerical algorithms.
The Voyager 2 Photopolarimeter experiment has yielded the highest resolved data of Saturn's rings, exhibiting a wide variety of features. The B-ring region between 105000 km and 110000 km distance from Saturn has been investigated. It has a high matter density and contains no significance features visible by eye. Analysis with statistical methods has let us to the detection of two significant events. These features are correlated with the inner 3:2 resonances of the F-ring shepherd satellites Pandora and Prometheus, and may be evidence of large ring paricles caught in the corotation resonances.
Approaching physical limits in speed and size of today's magnetic storage and processing technologies demands new concepts for controlling magnetization and moves researches on optically induced magnetic dynamics. Studies on photoinduced magnetization dynamics and their underlying mechanisms have been primarily performed on ferromagnetic metals. Ferromagnetic dynamics bases on transfer of the conserved angular momentum connected with atomic magnetic moments out of the parallel aligned magnetic system into other degrees of freedom.
In this thesis the so far rarely studied response of antiferromagnetic order to ultra-short optical laser pulses in a metal is investigated. The experiments were performed at the FemtoSpex slicing facility at the storage ring BESSY II, an unique source for ultra-short elliptically polarized x-ray pulses. Laser-induced changes of the 4f-magnetic order parameter in ferro- and antiferromagnetic dysprosium (Dy), were studied by x-ray methods, which yield directly comparable quantities. The discovered fundamental differences in the temporal and spatial behavior of ferro- and antiferrmagnetic dynamics are assinged to an additional channel for angular momentum transfer, which reduces the antiferromagnetic order by redistributing angular momentum within the non-parallel aligned magnetic system, and hence conserves the zero net magnetization. It is shown that antiferromagnetic dynamics proceeds considerably faster and more energy-efficient than demagnetization in ferromagnets. By probing antiferromagnetic order in time and space, it is found to be affected along the whole sample depth of an in situ grown 73 nm tick Dy film. Interatomic transfer of angular momentum via fast diffusion of laser-excited 5d electrons is held responsible for the out-most long-ranging effect. Ultrafast ferromagnetic dynamics can be expected to base on the same origin, which however leads to demagnetization only in regions close to interfaces caused by super-diffusive spin transport. Dynamics due to local scattering processes of excited but less mobile electrons, occur in both magnetic alignments only in directly excited regions of the sample and on slower pisosecond timescales. The thesis provides fundamental insights into photoinduced magnetic dynamics by directly comparing ferro- and antiferromagnetic dynamics in the same material and by consideration of the laser-induced magnetic depth profile.
In this paper we present an approach to recover the dynamics from recurrences of a system and then generate (multivariate) twin surrogate (TS) trajectories. In contrast to other approaches, such as the linear-like surrogates, this technique produces surrogates which correspond to an independent copy of the underlying system, i. e. they induce a trajectory of the underlying system visiting the attractor in a different way. We show that these surrogates are well suited to test for complex synchronization, which makes it possible to systematically assess the reliability of synchronization analyses. We then apply the TS to study binocular fixational movements and find strong indications that the fixational movements of the left and right eye are phase synchronized. This result indicates that there might be one centre only in the brain that produces the fixational movements in both eyes or a close link between two centres.
We present an approach to generate (multivariate) twin surrogates (TS) based on recurrence properties. This technique generates surrogates which correspond to an independent copy of the underlying system, i. e. they induce a trajectory of the underlying system starting at different initial conditions. We show that these surrogates are well suited to test for complex synchronisation and exemplify this for the paradigmatic system of R¨ossler oscillators. The proposed test enables to assess the statistical relevance of a synchronisation analysis from passive experiments which are typical in natural systems.
Recurrence plots, a rather promising tool of data analysis, have been introduced by Eckman et al. in 1987. They visualise recurrences in phase space and give an overview about the system's dynamics. Two features have made the method rather popular. Firstly they are rather simple to compute and secondly they are putatively easy to interpret. However, the straightforward interpretation of recurrence plots for some systems yields rather surprising results. For example indications of low dimensional chaos have been reported for stock marked data, based on recurrence plots. In this work we exploit recurrences or ``naturally occurring analogues'' as they were termed by E. Lorenz, to obtain three key results. One of which is that the most striking structures which are found in recurrence plots are hinged to the correlation entropy and the correlation dimension of the underlying system. Even though an eventual embedding changes the structures in recurrence plots considerably these dynamical invariants can be estimated independently of the special parameters used for the computation. The second key result is that the attractor can be reconstructed from the recurrence plot. This means that it contains all topological information of the system under question in the limit of long time series. The graphical representation of the recurrences can also help to develop new algorithms and exploit specific structures. This feature has helped to obtain the third key result of this study. Based on recurrences to points which have the same ``recurrence structure'', it is possible to generate surrogates of the system which capture all relevant dynamical characteristics, such as entropies, dimensions and characteristic frequencies of the system. These so generated surrogates are shadowed by a trajectory of the system which starts at different initial conditions than the time series in question. They can be used then to test for complex synchronisation.
Additive Manufacturing (AM) in terms of laser powder-bed fusion (L-PBF) offers new prospects regarding the design of parts and enables therefore the production of lattice structures. These lattice structures shall be implemented in various industrial applications (e.g. gas turbines) for reasons of material savings or cooling channels. However, internal defects, residual stress, and structural deviations from the nominal geometry are unavoidable.
In this work, the structural integrity of lattice structures manufactured by means of L-PBF was non-destructively investigated on a multiscale approach.
A workflow for quantitative 3D powder analysis in terms of particle size, particle shape, particle porosity, inter-particle distance and packing density was established. Synchrotron computed tomography (CT) was used to correlate the packing density with the particle size and particle shape. It was also observed that at least about 50% of the powder porosity was released during production of the struts.
Struts are the component of lattice structures and were investigated by means of laboratory CT. The focus was on the influence of the build angle on part porosity and surface quality. The surface topography analysis was advanced by the quantitative characterisation of re-entrant surface features. This characterisation was compared with conventional surface parameters showing their complementary information, but also the need for AM specific surface parameters.
The mechanical behaviour of the lattice structure was investigated with in-situ CT under compression and successive digital volume correlation (DVC). The deformation was found to be knot-dominated, and therefore the lattice folds unit cell layer wise.
The residual stress was determined experimentally for the first time in such lattice structures. Neutron diffraction was used for the non-destructive 3D stress investigation. The principal stress directions and values were determined in dependence of the number of measured directions. While a significant uni-axial stress state was found in the strut, a more hydrostatic stress state was found in the knot. In both cases, strut and knot, seven directions were at least needed to find reliable principal stress directions.
In the presence of a solid-liquid or liquid-air interface, bacteria can choose between a planktonic and a sessile lifestyle. Depending on environmental conditions, cells swimming in close proximity to the interface can irreversibly attach to the surface and grow into three-dimensional aggregates where the majority of cells is sessile and embedded in an extracellular polymer matrix (biofilm). We used microfluidic tools and time lapse microscopy to perform experiments with the polarly flagellated soil bacterium Pseudomonas putida (P. putida), a bacterial species that is able to form biofilms. We analyzed individual trajectories of swimming cells, both in the bulk fluid and in close proximity to a glass-liquid interface. Additionally, surface related growth during the early phase of biofilm formation was investigated. In the bulk fluid, P.putida shows a typical bacterial swimming pattern of alternating periods of persistent displacement along a line (runs) and fast reorientation events (turns) and cells swim with an average speed around 24 micrometer per second. We found that the distribution of turning angles is bimodal with a dominating peak around 180 degrees. In approximately six out of ten turning events, the cell reverses its swimming direction. In addition, our analysis revealed that upon a reversal, the cell systematically changes its swimming speed by a factor of two on average. Based on the experimentally observed values of mean runtime and rotational diffusion, we presented a model to describe the spreading of a population of cells by a run-reverse random walker with alternating speeds. We successfully recover the mean square displacement and, by an extended version of the model, also the negative dip in the directional autocorrelation function as observed in the experiments. The analytical solution of the model demonstrates that alternating speeds enhance a cells ability to explore its environment as compared to a bacterium moving at a constant intermediate speed. As compared to the bulk fluid, for cells swimming near a solid boundary we observed an increase in swimming speed at distances below d= 5 micrometer and an increase in average angular velocity at distances below d= 4 micrometer. While the average speed was maximal with an increase around 15% at a distance of d= 3 micrometer, the angular velocity was highest in closest proximity to the boundary at d=1 micrometer with an increase around 90% as compared to the bulk fluid. To investigate the swimming behavior in a confinement between two solid boundaries, we developed an experimental setup to acquire three-dimensional trajectories using a piezo driven objective mount coupled to a high speed camera. Results on speed and angular velocity were consistent with motility statistics in the presence of a single boundary. Additionally, an analysis of the probability density revealed that a majority of cells accumulated near the upper and lower boundaries of the microchannel. The increase in angular velocity is consistent with previous studies, where bacteria near a solid boundary were shown to swim on circular trajectories, an effect which can be attributed to a wall induced torque. The increase in speed at a distance of several times the size of the cell body, however, cannot be explained by existing theories which either consider the drag increase on cell body and flagellum near a boundary (resistive force theory) or model the swimming microorganism by a multipole expansion to account for the flow field interaction between cell and boundary. An accumulation of swimming bacteria near solid boundaries has been observed in similar experiments. Our results confirm that collisions with the surface play an important role and hydrodynamic interactions alone cannot explain the steady-state accumulation of cells near the channel walls. Furthermore, we monitored the number growth of cells in the microchannel under medium rich conditions. We observed that, after a lag time, initially isolated cells at the surface started to grow by division into colonies of increasing size, while coexisting with a comparable smaller number of swimming cells. After 5:50 hours, we observed a sudden jump in the number of swimming cells, which was accompanied by a breakup of bigger clusters on the surface. After approximately 30 minutes where planktonic cells dominated in the microchannel, individual swimming cells reattached to the surface. We interpret this process as an emigration and recolonization event. A number of complementary experiments were performed to investigate the influence of collective effects or a depletion of the growth medium on the transition. Similar to earlier observations on another bacterium from the same family we found that the release of cells to the swimming phase is most likely the result of an individual adaption process, where syntheses of proteins for flagellar motility are upregulated after a number of division cycles at the surface.
Die vorliegende Arbeit versammelt zwei einleitende Kapitel und zehn Essays, die sich als kritisch-konstruktive Beiträge zu einem "erlebenden Verstehen" (Buck) von Physik lesen lassen. Die traditionelle Anlage von Schulphysik zielt auf eine systematische Darstellung naturwissenschaftlichen Wissens, das dann an ausgewählten Beispielen angewendet wird: Schulexperimente beweisen die Aussagen der Systematik (oder machen sie wenigstens plausibel), ausgewählte Phänomene werden erklärt. In einem solchen Rahmen besteht jedoch leicht die Gefahr, den Bezug zur Lebenswirklichkeit oder den Interessen der Schüler zu verlieren. Diese Problematik ist seit mindestens 90 Jahren bekannt, didaktische Antworten - untersuchendes Lernen, Kontextualisierung, Schülerexperimente etc. - adressieren allerdings eher Symptome als Ursachen. Naturwissenschaft wird dadurch spannend, dass sie ein spezifisch investigatives Weltverhältnis stiftet: man müsste gleichsam nicht Wissen, sondern "Fragen lernen" (und natürlich auch, wie Antworten gefunden werden...). Doch wie kann dergleichen auf dem Niveau von Schulphysik aussehen, was für einen theoretischen Rahmen kann es hier geben? In den gesammelten Arbeiten wird einigen dieser Spuren nachgegangen: Der Absage an das zu modellhafte Denken in der phänomenologischen Optik, der Abgrenzung formal-mathematischen Denkens gegen wirklichkeitsnähere Formen naturwissenschaftlicher Denkbewegungen und Evidenz, dem Potential alternativer Interpretationen von "Physikunterricht", der Frage nach dem "Verstehen" u.a. Dabei werden nicht nur Bezüge zum modernen bildungstheoretischen Paradigma der Kompetenz sichtbar, sondern es wird auch versucht, eine ganze Reihe konkrete (schul-)physikalische Beispiele dafür zu geben, was passiert, wenn nicht schon gewusste Antworten Thema werden, sondern Expeditionen, die sich der physischen Welt widmen: Die Schlüsselbegriffe des Fachs, die Methoden der Datenerhebung und Interpretation, die Such- und Denkbewegungen kommen dabei auf eine Weise zur Sprache, die sich nicht auf die Fachsystematik abstützen möchte, sondern diese motivieren, konturieren und verständlich machen will.
Supermassive black holes reside in the hearts of almost all massive galaxies. Their evolutionary path seems to be strongly linked to the evolution of their host galaxies, as implied by several empirical relations between the black hole mass (M BH ) and different host galaxy properties. The physical driver of this co-evolution is, however, still not understood. More mass measurements over homogeneous samples and a detailed understanding of systematic uncertainties are required to fathom the origin of the scaling relations.
In this thesis, I present the mass estimations of supermassive black holes in the nuclei of one late-type and thirteen early-type galaxies. Our SMASHING sample extends from the intermediate to the massive galaxy mass regime and was selected to fill in gaps in number of galaxies along the scaling relations. All galaxies were observed at high spatial resolution, making use of the adaptive-optics mode of integral field unit (IFU) instruments on state-of-the-art telescopes (SINFONI, NIFS, MUSE). I extracted the stellar kinematics from these observations and constructed dynamical Jeans and Schwarzschild models to estimate the mass of the central black holes robustly. My new mass estimates increase the number of early-type galaxies with measured black hole masses by 15%. The seven measured galaxies with nuclear light deficits (’cores’) augment the sample of cored galaxies with measured black holes by 40%. Next to determining massive black hole masses, evaluating the accuracy of black hole masses is crucial for understanding the intrinsic scatter of the black hole- host galaxy scaling relations. I tested various sources of systematic uncertainty on my derived mass estimates.
The M BH estimate of the single late-type galaxy of the sample yielded an upper limit, which I could constrain very robustly. I tested the effects of dust, mass-to-light ratio (M/L) variation, and dark matter on my measured M BH . Based on these tests, the typically assumed constant M/L ratio can be an adequate assumption to account for the small amounts of dark matter in the center of that galaxy. I also tested the effect of a variable M/L variation on the M BH measurement on a second galaxy. By considering stellar M/L variations in the dynamical modeling, the measured M BH decreased by 30%. In the future, this test should be performed on additional galaxies to learn how an as constant assumed M/L flaws the estimated black hole masses.
Based on our upper limit mass measurement, I confirm previous suggestions that resolving the predicted BH sphere-of-influence is not a strict condition to measure black hole masses. Instead, it is only a rough guide for the detection of the black hole if high-quality, and high signal-to-noise IFU data are used for the measurement. About half of our sample consists of massive early-type galaxies which show nuclear surface brightness cores and signs of triaxiality. While these types of galaxies are typically modeled with axisymmetric modeling methods, the effects on M BH are not well studied yet. The massive galaxies of our presented galaxy sample are well suited to test the effect of different stellar dynamical models on the measured black hole mass in evidently triaxial galaxies. I have compared spherical Jeans and axisymmetric Schwarzschild models and will add triaxial Schwarzschild models to this comparison in the future. The constructed Jeans and Schwarzschild models mostly disagree with each other and cannot reproduce many of the triaxial features of the galaxies (e.g., nuclear sub-components, prolate rotation). The consequence of the axisymmetric-triaxial assumption on the accuracy of M BH and its impact on the black hole - host galaxy relation needs to be carefully examined in the future.
In the sample of galaxies with published M BH , we find measurements based on different dynamical tracers, requiring different observations, assumptions, and methods. Crucially, different tracers do not always give consistent results. I have used two independent tracers (cold molecular gas and stars) to estimate M BH in a regular galaxy of our sample. While the two estimates are consistent within their errors, the stellar-based measurement is twice as high as the gas-based. Similar trends have also been found in the literature. Therefore, a rigorous test of the systematics associated with the different modeling methods is required in the future. I caution to take the effects of different tracers (and methods) into account when discussing the scaling relations.
I conclude this thesis by comparing my galaxy sample with the compilation of galaxies with measured black holes from the literature, also adding six SMASHING galaxies, which were published outside of this thesis. None of the SMASHING galaxies deviates significantly from the literature measurements. Their inclusion to the published early-type galaxies causes a change towards a shallower slope for the M BH - effective velocity dispersion relation, which is mainly driven by the massive galaxies of our sample. More unbiased and homogenous measurements are needed in the future to determine the shape of the relation and understand its physical origin.
Leveraging large-deviation statistics to decipher the stochastic properties of measured trajectories
(2021)
Extensive time-series encoding the position of particles such as viruses, vesicles, or individualproteins are routinely garnered insingle-particle tracking experiments or supercomputing studies.They contain vital clues on how viruses spread or drugs may be delivered in biological cells.Similar time-series are being recorded of stock values in financial markets and of climate data.Such time-series are most typically evaluated in terms of time-averaged mean-squareddisplacements (TAMSDs), which remain random variables for finite measurement times. Theirstatistical properties are different for differentphysical stochastic processes, thus allowing us toextract valuable information on the stochastic process itself. To exploit the full potential of thestatistical information encoded in measured time-series we here propose an easy-to-implementand computationally inexpensive new methodology, based on deviations of the TAMSD from itsensemble average counterpart. Specifically, we use the upper bound of these deviations forBrownian motion (BM) to check the applicability of this approach to simulated and real data sets.By comparing the probability of deviations fordifferent data sets, we demonstrate how thetheoretical bound for BM reveals additional information about observed stochastic processes. Weapply the large-deviation method to data sets of tracer beads tracked in aqueous solution, tracerbeads measured in mucin hydrogels, and of geographic surface temperature anomalies. Ouranalysis shows how the large-deviation properties can be efficiently used as a simple yet effectiveroutine test to reject the BM hypothesis and unveil relevant information on statistical propertiessuch as ergodicity breaking and short-time correlations.
In dieser Arbeit wurden zwei Themenbereiche bearbeitet: 1. Ellipsometrie an Adsorpionsschichten niedermolekularer Tenside an der Wasser/Luft-Grenzfläche (Ellipsometrie ist geeignet, adsorbierte Mengen von nicht- und zwitterionischen Tensiden zu messen, bei ionischen werden zusätzlich die Gegenionen mit erfaßt; Ellipsometrie mißt sich ändernde Gegenionenverteilung). 2. Ellipsometrische Untersuchung von endadsorbierten Polymerbürsten an der Wasser/Öl-Grenzfläche (Ellipsometrie ist nicht in der Lage, verschiedene Segmentkonzentrationsprofile innerhalb der Bürste aufzulösen, ist aber sehr wohl geeignet, Skalengesetze für Dicken und Drücke in Abhängigkeit von Ankerdichte und Kettenlänge der Polymere zu überprüfen; für in Heptan gequollene Poly-isobuten-Bürsten konnte gezeigt werden, daß sie sich entsprechend den theoretischen Vorhersagen für Bürsten in einem theta-Lösungsmittel verhalten)
There is a large variety of goals instructors have for laboratory courses, with different courses focusing on different subsets of goals. An often implicit, but crucial, goal is to develop students’ attitudes, views, and expectations about experimental physics to align with practicing experimental physicists. The assessment of laboratory courses upon this one dimension of learning has been intensively studied in U.S. institutions using the Colorado Learning Attitudes about Science Survey for Experimental Physics (E-CLASS). However, there is no such an instrument available to use in Germany, and the influence of laboratory courses on students views about the nature of experimental physics is still unexplored at German-speaking institutions. Motivated by the lack of an assessment tool to investigate this goal in laboratory courses at German-speaking institutions, we present a translated version of the E-CLASS adapted to the context at German-speaking institutions. We call the German version of the E-CLASS, the GE-CLASS. We describe the translation process and the creation of an automated web-based system for instructors to assess their laboratory courses. We also present first results using GE-CLASS obtained at the University of Potsdam. A first comparison between E-CLASS and GE-CLASS results shows clear differences between University of Potsdam and U.S. students’ views and beliefs about experimental physics.
Partial synchronous states exist in systems of coupled oscillators between full synchrony and asynchrony. They are an important research topic because of their variety of different dynamical states. Frequently, they are studied using phase dynamics. This is a caveat, as phase dynamics are generally obtained in the weak coupling limit of a first-order approximation in the coupling strength. The generalization to higher orders in the coupling strength is an open problem. Of particular interest in the research of partial synchrony are systems containing both attractive and repulsive coupling between the units. Such a mix of coupling yields very specific dynamical states that may help understand the transition between full synchrony and asynchrony. This thesis investigates partial synchronous states in mixed-coupling systems. First, a method for higher-order phase reduction is introduced to observe interactions beyond the pairwise one in the first-order phase description, hoping that these may apply to mixed-coupling systems. This new method for coupled systems with known phase dynamics of the units gives correct results but, like most comparable methods, is computationally expensive. It is applied to three Stuart-Landau oscillators coupled in a line with a uniform coupling strength. A numerical method is derived to verify the analytical results. These results are interesting but give importance to simpler phase models that still exhibit exotic states. Such simple models that are rarely considered are Kuramoto oscillators with attractive and repulsive interactions. Depending on how the units are coupled and the frequency difference between the units, it is possible to achieve many different states. Rich synchronization dynamics, such as a Bellerophon state, are observed when considering a Kuramoto model with attractive interaction in two subpopulations (groups) and repulsive interactions between groups. In two groups, one attractive and one repulsive, of identical oscillators with a frequency difference, an interesting solitary state appears directly between full and partial synchrony. This system can be described very well analytically.
Variationen der stratosphärischen Residualzirkulation und ihr Einfluss auf die Ozonverteilung
(2006)
Die Residualzirkulation entspricht der mittleren Massenzirkulation und beschreibt die im zonalen Mittel stattfindenden meridionalen Transportprozesse. Die Variationen der Residualzirkulation bestimmen gemeinsam mit dem anthropogen verursachten Ozonabbau die jährlichen Schwankungen der Ozongesamtsäule im arktischen Frühling. In der vorliegenden Arbeit wird die Geschwindigkeit des arktischen Astes der Residualzirkulation aus atmosphärischen Daten gewonnen. Zu diesem Zweck wird das diabatische Absinken im Polarwirbel mit Hilfe von Trajektorienrechnungen bestimmt. Die vertikalen Bewegungen der Luftpakete können mit vertikalen Windfeldern oder entsprechend einem neuen Ansatz mit diabatischen Heizraten angetrieben werden. Die Eingabedaten stammen aus dem 45 Jahre langen Reanalyse-Datensatz des "European Centre for Medium Range Weather Forecast" (ECMWF). Außerdem kann für die Jahre ab 1984 die operationelle ECMWF-Analyse verwendet werden. Die Qualität und Robustheit der Heizraten- und Trajektorienrechnungen werden durch Sensitivitätsstudien und Vergleiche mit anderen Modellen untermauert. Anschließend werden umfangreiche Trajektorienensemble statistisch ausgewertet, um ein detailliertes, zeit- und höhenaufgelöstes Bild des diabatischen Absinkens zu ermitteln. In diesem Zusammenhang werden zwei Methoden entwickelt, um das Absinken gemittelt im Polarwirbel oder als Funktion der äquivalenten Breite zu bestimmen. Es wird gezeigt, dass es notwendig ist den Lagrangeschen auf Trajektorienrechnungen basierenden Ansatz zu verfolgen, da die einfachen Eulerschen Mittel Abweichungen zu den Lagrangeschen Vertikalgeschwindigkeiten aufweisen. Das wirbelgemittelte Absinken wird für einzelne Winter mit dem beobachteten Absinken langlebiger Spurengase und anderen Modellstudien verglichen. Der Vergleich zeigt, dass das Absinken basierend auf den vertikalen Windfeldern der ECMWF-Datensätze den Nettoluftmassentransport durch die Residualzirkulation sehr stark überschätzt. Der neue Ansatz basierend auf den Heizraten ergibt hingegen realistische Ergebnisse und wird aus diesem Grund für alle Rechnungen verwendet. Es wird erstmalig eine Klimatologie des diabatischen Absinkens über einen fast fünf Jahrzehnte umfassenden Zeitraum erstellt. Die Klimatologie beinhaltet das vertikal und zeitlich aufgelöste diabatische Absinken gemittelt über den gesamten Polarwirbel und Informationen über die räumliche Struktur des vertikalen Absinkens. Die natürliche Jahr-zu-Jahr Variabilität des diabatischen Absinkens ist sehr stark ausgeprägt. Es wird gezeigt, dass zwischen der ECMWF-Zeitreihe des diabatischen Absinkens und der Zeitreihe aus einem unabhängig analysierten Temperaturdatensatz hohe Korrelationen bestehen. Erstmals wird der Einfluss von Transportprozessen auf die Ozongesamtsäule im arktischen Frühling direkt quantifiziert. Es wird gezeigt, dass die Jahr-zu-Jahr Variabilität der Ozongesamtsäule im arktischen Frühling zu gleichen Anteilen durch die Variabilität der dynamischen Komponente und durch die Variabilität der chemischen Komponente beeinflusst wird. Die gefundenen Variabilitäten von diabatischem Absinken und Ozoneintrag in hohen Breiten werden mit der vertikalen Ausbreitung planetarer Wellen aus der Troposphäre in die Stratosphäre in Beziehung gesetzt.
Ferroic materials have attracted a lot of attention over the years due to their wide range of applications in sensors, actuators, and memory devices. Their technological applications originate from their unique properties such as ferroelectricity and piezoelectricity. In order to optimize these materials, it is necessary to understand the coupling between their nanoscale structure and transient response, which are related to the atomic structure of the unit cell.
In this thesis, synchrotron X-ray diffraction is used to investigate the structure of ferroelectric thin film capacitors during application of a periodic electric field. Combining electrical measurements with time-resolved X-ray diffraction on a working device allows for visualization of the interplay between charge flow and structural motion. This constitutes the core of this work. The first part of this thesis discusses the electrical and structural dynamics of a ferroelectric Pt/Pb(Zr0.2,Ti0.8)O3/SrRuO3 heterostructure during charging, discharging, and polarization reversal. After polarization reversal a non-linear piezoelectric response develops on a much longer time scale than the RC time constant of the device. The reversal process is inhomogeneous and induces a transient disordered domain state. The structural dynamics under sub-coercive field conditions show that this disordered domain state can be remanent and can be erased with an appropriate voltage pulse sequence. The frequency-dependent dynamic characterization of a Pb(Zr0.52,Ti0.48)O3 layer, at the morphotropic phase boundary, shows that at high frequency, the limited domain wall velocity causes a phase lag between the applied field and both the structural and electrical responses. An external modification of the RC time constant of the measurement delays the switching current and widens the electromechanical hysteresis loop while achieving a higher compressive piezoelectric strain within the crystal.
In the second part of this thesis, time-resolved reciprocal space maps of multiferroic BiFeO3 thin films were measured to identify the domain structure and investigate the development of an inhomogeneous piezoelectric response during the polarization reversal. The presence of 109° domains is evidenced by the splitting of the Bragg peak.
The last part of this work investigates the effect of an optically excited ultrafast strain or heat pulse propagating through a ferroelectric BaTiO3 layer, where we observed an additional current response due to the laser pulse excitation of the metallic bottom electrode of the heterostructure.
Galaxy clusters are the largest known gravitationally bound objects, their study is important for both an intrinsic understanding of their systems and an investigation of the large scale structure of the universe. The multi- component nature of galaxy clusters offers multiple observable signals across the electromagnetic spectrum. At X-ray wavelengths, galaxy clusters are simply identified as X-ray luminous, spatially extended, and extragalactic sources. X-ray observations offer the most powerful technique for constructing cluster catalogues. The main advantages of the X-ray cluster surveys are their excellent purity and completeness and the X-ray observables are tightly correlated with mass, which is indeed the most fundamental parameter of clusters. In my thesis I have conducted the 2XMMi/SDSS galaxy cluster survey, which is a serendipitous search for galaxy clusters based on the X-ray extended sources in the XMM-Newton Serendipitous Source Catalogue (2XMMi-DR3). The main aims of the survey are to identify new X-ray galaxy clusters, investigate their X-ray scaling relations, identify distant cluster candidates, and study the correlation of the X-ray and optical properties. The survey is constrained to those extended sources that are in the footprint of the Sloan Digital Sky Survey (SDSS) in order to be able to identify the optical counterparts as well as to measure their redshifts that are mandatory to measure their physical properties. The overlap area be- tween the XMM-Newton fields and the SDSS-DR7 imaging, the latest SDSS data release at the starting of the survey, is 210 deg^2. The survey comprises 1180 X-ray cluster candidates with at least 80 background-subtracted photon counts, which passed the quality control process. To measure the optical redshifts of the X-ray cluster candidates, I used three procedures; (i) cross-matching these candidates with the recent and largest optically selected cluster catalogues in the literature, which yielded the photometric redshifts of about a quarter of the X-ray cluster candidates. (ii) I developed a finding algorithm to search for overdensities of galaxies at the positions of the X-ray cluster candidates in the photometric redshift space and to measure their redshifts from the SDSS-DR8 data, which provided the photometric redshifts of 530 groups/clusters. (iii) I developed an algorithm to identify the cluster candidates associated with spectroscopically targeted Luminous Red Galaxies (LRGs) in the SDSS-DR9 and to measure the cluster spectroscopic redshift, which provided 324 groups and clusters with spectroscopic confirmation based on spectroscopic redshift of at least one LRG. In total, the optically confirmed cluster sample comprises 574 groups and clusters with redshifts (0.03 ≤ z ≤ 0.77), which is the largest X-ray selected cluster catalogue to date based on observations from the current X-ray observatories (XMM-Newton, Chandra, Suzaku, and Swift/XRT). Among the cluster sample, about 75 percent are newly X-ray discovered groups/clusters and 40 percent are new systems to the literature. To determine the X-ray properties of the optically confirmed cluster sample, I reduced and analysed their X-ray data in an automated way following the standard pipelines of processing the XMM-Newton data. In this analysis, I extracted the cluster spectra from EPIC(PN, MOS1, MOS2) images within an optimal aperture chosen to maximise the signal-to-noise ratio. The spectral fitting procedure provided the X-ray temperatures kT (0.5 - 7.5 keV) for 345 systems that have good quality X-ray data. For all the optically confirmed cluster sample, I measured the physical properties L500 (0.5 x 10^42 – 1.2 x 10^45 erg s-1 ) and M500 (1.1 x 10^13 – 4.9 x 10^14 M⊙) from an iterative procedure using published scaling relations. The present X-ray detected groups and clusters are in the low and intermediate luminosity regimes apart from few luminous systems, thanks to the XMM-Newton sensitivity and the available XMM-Newton deep fields The optically confirmed cluster sample with measurements of redshift and X-ray properties can be used for various astrophysical applications. As a first application, I investigated the LX - T relation for the first time based on a large cluster sample of 345 systems with X-ray spectroscopic parameters drawn from a single survey. The current sample includes groups and clusters with wide ranges of redshifts, temperatures, and luminosities. The slope of the relation is consistent with the published ones of nearby clusters with higher temperatures and luminosities. The derived relation is still much steeper than that predicted by self-similar evolution. I also investigated the evolution of the slope and the scatter of the LX - T relation with the cluster redshift. After excluding the low luminosity groups, I found no significant changes of the slope and the intrinsic scatter of the relation with redshift when dividing the sample into three redshift bins. When including the low luminosity groups in the low redshift subsample, I found its LX - T relation becomes after than the relation of the intermediate and high redshift subsamples. As a second application of the optically confirmed cluster sample from our ongoing survey, I investigated the correlation between the cluster X-ray and the optical parameters that have been determined in a homogenous way. Firstly, I investigated the correlations between the BCG properties (absolute magnitude and optical luminosity) and the cluster global proper- ties (redshift and mass). Secondly, I computed the richness and the optical luminosity within R500 of a nearby subsample (z ≤ 0.42, with a complete membership detection from the SDSS data) with measured X-ray temperatures from our survey. The relation between the estimated optical luminosity and richness is also presented. Finally, the correlation between the cluster optical properties (richness and luminosity) and the cluster global properties (X-ray luminosity, temperature, mass) are investigated.
This thesis is focused on the electronic, spin-dependent and dynamical properties of thin magnetic systems. Photoemission-related techniques are combined with synchrotron radiation to study the spin-dependent properties of these systems in the energy and time domains. In the first part of this thesis, the strength of electron correlation effects in the spin-dependent electronic structure of ferromagnetic bcc Fe(110) and hcp Co(0001) is investigated by means of spin- and angle-resolved photoemission spectroscopy. The experimental results are compared to theoretical calculations within the three-body scattering approximation and within the dynamical mean-field theory, together with one-step model calculations of the photoemission process. From this comparison it is demonstrated that the present state of the art many-body calculations, although improving the description of correlation effects in Fe and Co, give too small mass renormalizations and scattering rates thus demanding more refined many-body theories including nonlocal fluctuations. In the second part, it is shown in detail monitoring by photoelectron spectroscopy how graphene can be grown by chemical vapour deposition on the transition-metal surfaces Ni(111) and Co(0001) and intercalated by a monoatomic layer of Au. For both systems, a linear E(k) dispersion of massless Dirac fermions is observed in the graphene pi-band in the vicinity of the Fermi energy. Spin-resolved photoemission from the graphene pi-band shows that the ferromagnetic polarization of graphene/Ni(111) and graphene/Co(0001) is negligible and that graphene on Ni(111) is after intercalation of Au spin-orbit split by the Rashba effect. In the last part, a time-resolved x-ray magnetic circular dichroic-photoelectron emission microscopy study of a permalloy platelet comprising three cross-tie domain walls is presented. It is shown how a fast picosecond magnetic response in the precessional motion of the magnetization can be induced by means of a laser-excited photoswitch. From a comparision to micromagnetic calculations it is demonstrated that the relatively high precessional frequency observed in the experiments is directly linked to the nature of the vortex/antivortex dynamics and its response to the magnetic perturbation. This includes the time-dependent reversal of the vortex core polarization, a process which is beyond the limit of detection in the present experiments.
The evolution of massive stars is strongly influenced by their initial chemical composition. We have computed rapidly-rotating massive star models with low metallicity (∼1/50 Z⊙) that evolve chemically homogeneously and have optically-thin winds during the main sequence evolution. These luminous and hot stars are predicted to emit intense mid- and far-UV radiation, but without the broad emission lines that characterize WR stars with optically-thick winds. We show that such Transparent Wind UV-Intense (TWUIN) stars may be responsible for the high number of He ii ionizing photons observed in metal-poor dwarf galaxies, such as IZw 18. We find that these TWUIN stars are possible long-duration gamma-ray burst progenitors.
Magnetorotational instability (MRI) is one of the most important and most common instabilities in astrophysics. Today it is widely accepted that it serves as a major source of turbulent viscosity in accretion disks, the most energy efficient objects in the universe. The importance of the MRI for astrophysics has been realized only in recent fifteen years. However, originally it was discovered much earlier, in 1959, in a very different context. Theoretical flow of a conducting liquid confined between differentially rotating cylinders in the presence of an external magnetic field was analyzed. The central conclusion is that the additional magnetic field parallel to the axis of rotation can destabilize otherwise stable flow. Theory of non-magnetized fluid motion between rotating cylinders has much longer history, though. It has been studied already in 1888 and today such setup is usually referred as a Taylor-Couette flow. To prove experimentally the existence of MRI in a magnetized Taylor-Couette flow is a demanding task and different MHD groups around the world try to achieve it. The main problem lies in the fact that laboratory liquid metals which are used in such experiments are characterized by small magnetic Prandtl number. Consequently rotation rates of the cylinders must be extremely large and vast amount of technical problems emerge. One of the most important difficulties is an influence of plates enclosing the cylinders in any experiment. For fast rotation the plates tend to dominate the whole flow and the MRI can not be observed. In this thesis we discuss a special helical configuration of the applied magnetic field which allows the critical rotation rates to be much smaller. If only the axial magnetic field is present, the cylinders must rotate with angular velocities corresponding to Reynolds numbers of order Re ≈ 10^6. With the helical field this number is dramatically reduced to Re ≈ 10^3. The azimuthal component of the magnetic field can be easily generated by letting an electric current through the axis of rotation, In a Taylor-Couette flow the (primary) instability manifests itself as Taylor vortices. The specific geometry of the helical magnetic field leads to a traveling wave solution and the vortices are drifting in a direction determined by rotation and the magnetic field. In an idealized study for infinitely long cylinders this is not a problem. However, if the cylinders have finite length and are bounded vertically by the plates the situation is different. In this dissertation it is shown, with use of numerical methods, that the traveling wave solution also exists for MHD Taylor-Couette flow at finite aspect ratio H/D, H being height of the cylinders, D width of the gap between them. The nonlinear simulations provide amplitudes of fluid velocity which are helpful in designing an experiment. Although the plates disturb the flow, parameters like the drift velocity indicate that the helical MRI operates in this case. The idea of the helical MRI was implemented in a very recent experiment PROMISE. The results provided, for the first time, an evidence that the (helical) MRI indeed exists. Nevertheless, the influence of the vertical endplates was evident and the experiment can be, in principle, improved. Exemplary methods of reduction of the end-effect are here proposed. Near the vertical boundaries develops an Ekman-Hartmann layer. Study of this layer for the MHD Taylor-Couette system as well as its impact on the global flow properties is presented. It is shown that the plates, especially if they are conducting, can disturb the flow far more then previously thought also for relatively slow rotation rates.
We calculate the additional carbon emissions as a result of the conversion of natural land in a process of urbanisation; and the change of carbon flows by “urbanised” ecosystems, when the atmospheric carbon is exported to the neighboring territories, from 1980 till 2050 for the eight regions of the world. As a scenario we use combined UN and demographic model′s prognoses for regional total and urban population growth. The calculations of urban areas dynamics are based on two models: the regression model and the Gamma-model. The urbanised area is sub-divided on built-up, „green“ (parks, etc.) and informal settlements (favelas) areas. The next step is to calculate the regional and world dynamics of carbon emission and export, and the annual total carbon balance. Both models give similar results with some quantitative differences. In the first model, the world annual emissions attain a maximum of 205 MtC/year between 2020-2030. Emissions will then slowly decrease. The maximum contributions are given by China and the Asia and Pacific regions. In the second model, world annual emissions increase to 1.25 GtC in 2005, beginning to decrease afterwards. If we compare the emission maximum with the annual emission caused by deforestation, 1.36GtC per year, then we can say that the role of urbanised territories (UT) is of a comparable magnitude. Regarding the world annual export of carbon by UT, we observe its monotonous growth by three times, from 24 MtC to 66 MtC in the first model, and from 249 MtC to 505 MtC in the second one. The latter, is therefore comparable to the amount of carbon transported by rivers into the ocean (196-537 MtC). By estimating the total balance we find that urbanisation shifts the total balance towards a “sink” state. The urbanisation is inhibited in the interval 2020-2030, and by 2050 the growth of urbanised areas would almost stop. Hence, the total emission of natural carbon at that stage will stabilise at the level of the 1980s (80 MtC per year). As estimated by the second model, the total balance, being almost constant until 2000, then starts to decrease at an almost constant rate. We can say that by the end of the XXI century, the total carbon balance will be equal to zero, when the exchange flows are fully balanced, and may even be negative, when the system begins to take up carbon from the atmosphere, i.e., becomes a “sink”.
Organic solar cells (OSCs) represent a new generation of solar cells with a range of captivating attributes including low-cost, light-weight, aesthetically pleasing appearance, and flexibility. Different from traditional silicon solar cells, the photon-electron conversion in OSCs is usually accomplished in an active layer formed by blending two kinds of organic molecules (donor and acceptor) with different energy levels together.
The first part of this thesis focuses on a better understanding of the role of the energetic offset and each recombination channel on the performance of these low-offset OSCs. By combining advanced experimental techniques with optical and electrical simulation, the energetic offsets between CT and excitons, several important insights were achieved: 1. The short circuit current density and fill-factor of low-offset systems are largely determined by field-dependent charge generation in such low-offset OSCs. Interestingly, it is strongly evident that such field-dependent charge generation originates from a field-dependent exciton dissociation yield. 2. The reduced energetic offset was found to be accompanied by strongly enhanced bimolecular recombination coefficient, which cannot be explained solely by exciton repopulation from CT states. This implies the existence of another dark decay channel apart from CT.
The second focus of the thesis was on the technical perspective. In this thesis, the influence of optical artifacts in differential absorption spectroscopy upon the change of sample configuration and active layer thickness was studied. It is exemplified and discussed thoroughly and systematically in terms of optical simulations and experiments, how optical artifacts originated from non-uniform carrier profile and interference can manipulate not only the measured spectra, but also the decay dynamics in various measurement conditions. In the end of this study, a generalized methodology based on an inverse optical transfer matrix formalism was provided to correct the spectra and decay dynamics manipulated by optical artifacts.
Overall, this thesis paves the way for a deeper understanding of the keys toward higher PCEs in low-offset OSC devices, from the perspectives of both device physics and characterization techniques.
The solar tachocline is a thin transition layer between the solar radiative zone rotating uniformly and the solar convection zone, which has a mainly latitudinal differential rotation profile. This layer has a thickness of less than $0.05R_{\sun}$ and is subject to extreme radial as well as latitudinal shears. Helioseismological estimates put this layer at roughly $0.7R_{\sun}$. The tachocline mostly resides in the sub-adiabatic, non-turbulent radiative interior, except for a small overlap with the convection zone on the top. Many proposed dynamo mechanisms involve strong toroidal magnetic fields in this transition region. The exact mechanisms behind the formation of such a thin layer is still disputed. A very plausible mechanism is the one involving a weak, relic poloidal magnetic field trapped inside the radiative zone, which is responsible for expelling differential rotation outwards. This was first proposed by \citet{RK97}. The present work develops this idea with numerical simulations including additional effects like meridional circulation. It is shown that a relic field of 1~Gauss or smaller would be sufficient to explain the observed thickness of the tachocline. The stability of the solar tachocline is addressed as the next part of the problem. It is shown that the tachocline is stable up to a differential rotation of 52\% in the absence of magnetic fields. This is a new finding as compared to the earlier two dimensional models which estimated the solar differential rotation (about 28\%) to be marginally stable or even unstable. The changed stability limit is attributed to the changed stability criterion of the 3-dimensional model which also involves radial gradients of the angular velocity. In the presence of toroidal magnetic field belts, the lowest non-axisymmetric mode is shown to be the most unstable one for the radiative part of the tachocline. It is estimated that the tachocline would become unstable for toroidal fields exceeding about 100~Gauss. With both formation and stability questions satisfactorily addressed, this work presents the most comprehensive analysis of the physical processes in the solar tachocline to date.
The X-ray observations of the colliding wind binary WR 21a is reported. The first monitoring performed by Swift/XRT in order to reveal the phase-locked variation. Our observations cover 201 different epochs from 2013 October 1 to 2015 January 30 for a total exposure of about 306 ks. It is found for the first time that the luminosity varies roughly in inverse proportion to the separation of the two stars before the X-ray maximum but later drops rapidly toward periastron.
Wasserdampf in der Stratosphäre und Troposphäre ist eines der wichtigsten atmosphärischen Treibhausgase. Neben seiner Bedeutung für das Klima hat es großen Einfluss auf die Bildung von polaren stratosphärischen Wolken sowie auf die atmosphärische Chemie. Weltweit erstmalig soll innerhalb eines Forscherverbundes in Deutschland ein leistungsstarkes, mobiles, abtastendes Wasserdampf-DIAL zur dreidimensional hochaufgelösten Messung des atmosphärischen Wasserdampfs entwickelt werden. Mit dem Wasserdampf-DIAL können Wasserdampfkonzentrationen in der Atmosphäre mit hoher zeitlicher und räumlicher Auflösung gemessen werden. Das DIAL basiert auf einem Titan-Saphir-Laser oder einem dazu alternativen OPO-Laser (optisch parametrischer Oszillator). Der für das optische Pumpen dieser Laser nötige Pumplaser wurde im Rahmen dieser Arbeit in der Arbeitsgruppe Nichtlineare Optik des Instituts für Physik der Universität Potsdam entwickelt. Ein hochauflösendes, mobiles DIAL erfordert einen Pumplaser mit großen Pulsenergien, guter Strahlqualität und einer hohen Effizienz. Um diese Ziele zu erreichen, wurde ein MOPA-System (Master Oscillator Power Amplifier) mit Frequenzstabilisierung auf der Basis von doppelbrechungskompensierten, transversal diodengepumpten Laserstäben entwickelt und untersucht. Auf dem Weg dahin wurden unterschiedliche Realisierungsmöglichkeiten des MOPA-Systems geprüft. Im Rahmen dessen wurden die Festkörperlasermaterialien Yb:YAG [1], kerndotierte Nd:YAG-Keramik [2] und herkömmliches Nd:YAG vorgestellt und hinsichtlich ihrer Eignung für dieses MOPA-System untersucht. Nachdem die Entscheidung für Nd:YAG als laseraktives Material gefallen war, konnte darauf aufbauend die Konzeptionierung des Lasersystems auf der Basis von Verstärkungsrechnungen vorgenommen werden. Die entwickelte Verstärkungsrechnung trägt den Tatbeständen von realen Systemen Rechnung, indem radiusabhängige Intensitäten und eine radiale, nicht homogene Inversionsdichte berücksichtigt werden. Die Frequenzstabilisierung des gepulsten Oszillators (Frequenzstabilität von 1 MHz) wurde mittels des Pound-Drever-Hall-Verfahrens vorgenommen. Mit der Heterodynmethode wird die Frequenzstabilität des Oszillators gemessen. Nach Untersuchungen über verschiedene Konfigurationen für lineare und ringförmige Oszillatoren, wurde ein Ringoszillator mit zwei Laserköpfen aufgebaut, in welchen von außen mit einem Laser fester Frequenz eingestrahlt wird. Dieser emittiert bei einer Wiederholrate von 400 Hz eine Pulsenergie von Eout = 21 mJ bei nahezu beugungsbegrenzter Strahlqualität (M2 < 1,2). Die Verstärkung dieser Laserpulse erfolgte zunächst durch eine Vorverstärkerstufe und anschließend durch zwei doppelbrechungskompensierte Hauptverstärker im Doppeldurchgang. Eine gute Strahlqualität (M2 = 1,75) konnte unter anderem erzielt werden, indem der Doppeldurchgang durch die Hauptverstärker mit einem phasenkonjugierenden Spiegel (SF6), auf der Basis der stimulierten Brillouin Streuung, realisiert wurde. Der entwickelte Laser emittiert Pulse mit einer Länge von 25 ns und einer Energie von 250 mJ. Insgesamt wurde ein bisher einmaliges Lasersystem entwickelt. In der Literatur sind die erreichte Frequenzstabilität, Strahlqualität und Leistung in dieser Kombination bisher nicht dokumentiert. In der Zukunft soll durch den Einsatz von kerndotierten, keramischen Lasermaterialien, höheren Pumpleistungen der Hauptverstärker und phasenkonjugierenden Spiegeln aus Quarz die Pulsenergie des Systems weiter erhöht werden. [1] M. Ostermeyer, A. Straesser, “Theoretical investigation of Yb:YAG as laser material for nanosecond pulse emission with large energies in the joule range”, Optics Communications, Vol. 274, pp. 422-428 (2007) [2] A. Sträßer and M. Ostermeyer, “Improving the brightness of side pumped power amplifiers by using core doped ceramic rods”, Optics Express, Vol. 14, pp. 6687- 6693 (2006)
In this thesis we utilize resolved stellar populations to improve our understanding of galaxy formation and evolution. In the first part we improve a method for metallicity determination of faint old stellar systems, in the second and third part we analyze the individual history of six nearby disk galaxies outside the Local Group.
A New Calibration of the Color Metallicity Relation of Red Giants for HST data:
It is well known, that the color distribution of stars on the the Red Giant Branch (RGB) can be used to determine metallicities of old stellar populations that have only shallow photometry. Based on the largest sample of globular clusters ever used for such studies, we quantify the relation between metallicity and color in the widely used HST ACS filters F606W and F814W.
We use a sample of globular clusters from the ACS Globular Cluster Survey and measure their RGB color at given absolute magnitudes to derive the color-metallicity relation. We find a clear relation between metallicity and RGB color; we investigate the scatter and the uncertainties in this relation and show its limitations. A comparison with isochrones shows reasonably good agreement with BaSTI models, a small offset to Dartmouth models, and a larger offset to Padua models.
Even for the best globular cluster data available, the metallicity of a simple stellar population can be determined from the RGB alone only with an accuracy of 0.3 dex for [M/H]<-1, and 0.15 dex for [M/H]>-1. For mixed populations, as they are observed in external galaxies, the uncertainties will be even larger due to uncertainties in extinction, age, etc. Therefore caution is necessary when interpreting photometric metallicities.
The Structural History of Nearby Low Mass Disk Galaxies:
We study the individual evolution histories of three nearby, low-mass, edge-on galaxies (IC5052, NGC4244, NGC5023).
Using the color magnitude diagrams of resolved stellar populations, we construct star count density maps for populations of different ages and analyze the change of structural parameters with stellar age within each galaxy.
The three galaxies show low vertical heating rates, which are much lower than the heating rate of the Milky Way. This indicates that heating agents, as giant molecular clouds and spiral structure are weak in low mass galaxies.
We do not detect a separate thick disk in any of the three galaxies, even though our observations cover a larger range in equivalent surface brightness than any integrated light study. While scaleheights increase with age, each population can be well described by a single disk. Only two of the galaxies contain a very weak additional component, which we identify as the faint halo. The mass of these faint halos is less than 1% of the mass of the disk.
All populations in the three galaxies exhibit no or only little flaring. While this finding is consistent with previous integrated light studies, it poses strong constraints on galaxy formation models, because most theoretical simulations often find strong flaring due to interactions or radial migration.
Furthermore, we find breaks in the radial profiles of all three galaxies. The radii of these breaks are independent of age, and the break strength is decreasing with age in two of the galaxies (NGC4244 and NGC5023). This is consistent with break formation models, that combine a star formation cutoff with radial migration. The differing behavior of IC5052 can be explained by a recent interaction or minor merger.
The Structural History of Massive Disk Galaxies:
We extend the structural analysis of stellar populations with distinct ages to three massive galaxies, NGC891, NGC4565 and NGC7814. While confusion effects due to the high stellar number densities in their central region, and the prominent dust lanes inhibit an detailed analysis of the radial profiles, we can study their vertical structure.
These massive galaxies also have a slower heating than the Milky Way, comparable to the low mass galaxies. This can be traced back to their already thick young populations and thick layers of their interstellar medium.
We do not find a clear separate thick disk in any of these three galaxies; all populations can be described by a single disk plus a S\'ersic bulge/halo component. In contrast to the low mass galaxies, we cannot rule out the presence of thick disks in the massive galaxies, because of the strong influence of the halo, that might hide the possible contribution of the thick disk to the vertical star count profiles. However, the faintness of the possible thick disks still points to problems in the earlier ubiquitous findings of thick disks in external galaxies.
Bestimmung von Ozonabbauraten über der Arktis und Antarktis mittels Ozonsonden- und Satellitendaten
(2005)
Diese Arbeit beschäftigt sich mit der chemischen Ozonzerstörung im arktischen und antarktischen stratosphärischen Polarwirbel. Diese wird durch Abbauprodukte von anthropogen emittierten Fluorchlorkohlenwasserstoffen und Halonen, Chlor- und Bromradikale, verursacht. Studien in denen der gemessene und modellierte Ozonabbau verglichen wird zeigen, dass die Prozeße bekannt sind, der quantitative Verlauf allerdings nicht vollständig verstanden ist. Die Prozesse, die zur Ozonzerstörung führen sind in beiden Polarwirbeln ähnlich. Allerdings fällt als Konsequenz unterschiedlicher meteorologischer Bedingungen der chemische Ozonabbau im arktischen Polarwirbel weniger drastisch aus als über der Antarktis. Der arktische Polarwirbel ist im Mittel stärker dynamisch gestört als der antarktische und weist eine stärkere Jahr-zu-Jahr Variabilität auf. Das erschwert die Messung des chemischen Ozonabbaus. Zur Trennung des chemischen Ozonabbaus von der dynamischen Umverteilung des Ozons im arktischen Polarwirbel wurde die Matchmethode entwickelt. Bei dieser Methode werden Luftpakete innerhalb des Polarwirbels mehrfach beprobt, um den chemischen Anteil der Ozonänderung zu quantifizieren. Zur Identifizierung von doppelt beprobten Luftpaketen werden Trajektorien aus Windfeldern berechnet. Können zwei Messungen im Rahmen bestimmter Qualitätskriterien durch eine Trajektorie verbunden werden, kann die Ozondifferenz zwischen beiden Sondierungen berechnet und als chemischer Ozonabbau interpretiert werden. Eine solche Koinzidenz wird Match genannt. Der Matchmethode liegt ein statistischer Ansatz zugrunde, so dass eine Vielzahl solcher doppelt beprobter Luftmassen vorliegen muss, um gesicherte Aussagen über die Ozonzerstörung gewinnen zu können. So erhält man die Ozonzerstörung in einem bestimmten Zeitintervall, also Ozonabbauraten. Um die Anzahl an doppelt beprobten Luftpackten zu erhöhen wurde eine aktive Koordinierung der Ozonsondenaufstiege entwickelt. Im Rahmen dieser Arbeit wurden Matchkampagnen während des arktischen Winters 2002/2003 und zum ersten Mal während eines antarktischen Winter (2003) durchgeführt. Aus den gewonnenen Daten wurden Ozonabbauraten in beiden Polarwirbeln bestimmt. Diese Abbauraten dienen zum einen der Evaluierung von Modellen, ermöglichen aber auch den direkten Vergleich von Ozonabbauraten in beiden Polarwirbeln. Der Winter 2002/2003 war zu Beginn durch sehr tiefe Temperaturen in der mittleren und unteren Stratosphäre charakterisiert, so dass die Matchkampagne Ende November gestartet wurde. Ab Januar war der Polarwirbel zeitweise stark dynamisch gestört. Die Kampagne ging bis Mitte März. Für den Höhenbereich von 400 bis 550 K potentieller Temperatur (15-23 km) konnten Ozonabbauraten und der Verlust in der Gesamtsäule berechnet werden. Die Ozonabbauraten wurden in verschiedenen Tests auf ihre Stabilität überprüft. Der antarktische Polarwirbel war vom Beginn des Winters bis Mitte Oktober 2003 sehr kalt und stellte Ende September kurzzeitig den Rekord für die größte bisher aufgetretene Ozonloch-Fläche ein. Es konnten für den Kampagnenzeitraum, Anfang Juni bis Anfang Oktober, Ozonabbauraten im Höhenbereich von 400 bis 550 K potentieller Temperatur ermittelt werden. Der zeitliche Verlauf des Ozonabbaus war dabei auf fast allen Höhenniveaus identisch. Die Zunahme des Sonnenlichtes im Polarwirbel mit der Zeit führt zu einem starken Anwachsen der Ozonabbauraten. Ab Mitte September gingen die Ozonabbauraten auf Null zurück, da bis zu diesem Zeitpunkt das gesamte Ozon zwischen ca. 14 und 21 km zerstört wurde. Im letzten Teil der Arbeit wird ein neuer Algorithmus auf Basis der multivariaten Regression vorgestellt, mit dem Ozonabbauraten aus Ozonprofilen verschiedener Sensoren gleichzeitig berechnet werden können. Dabei können neben der Ozonabbaurate die systematischen Fehler zwischen den einzelnen Sensoren bestimmt werden. Dies wurde exemplarisch am antarktischen Winter 2003 für das 475 K potentielle Temperatur Niveau gezeigt. Neben den Ozonprofilen der Sonden wurden Daten von zwei Satellitenexperimenten verwendet. Die mit der multivariaten Matchtechnik berechneten Ozonabbauraten stimmen gut mit den Ozonabbauraten der Einzelsensor-Matchansätze überein.
Soft nanocomposites with enhanced electromechanical response for dielectric elastomer actuators
(2011)
Electromechanical transducers based on elastomer capacitors are presently considered for many soft actuation applications, due to their large reversible deformation in response to electric field induced electrostatic pressure. The high operating voltage of such devices is currently a large drawback, hindering their use in applications such as biomedical devices and biomimetic robots, however, they could be improved with a careful design of their material properties. The main targets for improving their properties are increasing the relative permittivity of the active material, while maintaining high electric breakdown strength and low stiffness, which would lead to enhanced electrostatic storage ability and hence, reduced operating voltage. Improvement of the functional properties is possible through the use of nanocomposites. These exploit the high surface-to-volume ratio of the nanoscale filler, resulting in large effects on macroscale properties. This thesis explores several strategies for nanomaterials design. The resulting nanocomposites are fully characterized with respect to their electrical and mechanical properties, by use of dielectric spectroscopy, tensile mechanical analysis, and electric breakdown tests. First, nanocomposites consisting of high permittivity rutile TiO2 nanoparticles dispersed in thermoplastic block copolymer SEBS (poly-styrene-coethylene-co-butylene-co-styrene) are shown to exhibit permittivity increases of up to 3.7 times, leading to 5.6 times improvement in electrostatic energy density, but with a trade-off in mechanical properties (an 8-fold increase in stiffness). The variation in both electrical and mechanical properties still allows for electromechanical improvement, such that a 27 % reduction of the electric field is found compared to the pure elastomer. Second, it is shown that the use of nanofiller conductive particles (carbon black (CB)) can lead to a strong increase of relative permittivity through percolation, however, with detrimental side effects. These are due to localized enhancement of the electric field within the composite, which leads to sharp reductions in electric field strength. Hence, the increase in permittivity does not make up for the reduction in breakdown strength in relation to stored electrical energy, which may prohibit their practical use. Third, a completely new approach for increasing the relative permittivity and electrostatic energy density of a polymer based on 'molecular composites' is presented, relying on chemically grafting soft π-conjugated macromolecules to a flexible elastomer backbone. Polarization caused by charge displacement along the conjugated backbone is found to induce a large and controlled permittivity enhancement (470 % over the elastomer matrix), while chemical bonding, encapsulates the PANI chains manifesting in hardly any reduction in electric breakdown strength, and hence resulting in a large increase in stored electrostatic energy. This is shown to lead to an improvement in the sensitivity of the measured electromechanical response (83 % reduction of the driving electric field) as well as in the maximum actuation strain (250 %). These results represent a large step forward in the understanding of the strategies which can be employed to obtain high permittivity polymer materials with practical use for electro-elastomer actuation.
Perovskite photovoltaic (PV) cells have demonstrated power conversion efficiencies (PCE) that are close to those of monocrystalline silicon cells; however, in contrast to silicon PV, perovskites are not limited by Auger recombination under 1-sun illumination. Nevertheless, compared to GaAs and monocrystalline silicon PV, perovskite cells have significantly lower fill factors due to a combination of resistive and non-radiative recombination losses. This necessitates a deeper understanding of the underlying loss mechanisms and in particular the ideality factor of the cell. By measuring the intensity dependence of the external open-circuit voltage and the internal quasi-Fermi level splitting (QFLS), the transport resistance-free efficiency of the complete cell as well as the efficiency potential of any neat perovskite film with or without attached transport layers are quantified. Moreover, intensity-dependent QFLS measurements on different perovskite compositions allows for disentangling of the impact of the interfaces and the perovskite surface on the non-radiative fill factor and open-circuit voltage loss. It is found that potassium-passivated triple cation perovskite films stand out by their exceptionally high implied PCEs > 28%, which could be achieved with ideal transport layers. Finally, strategies are presented to reduce both the ideality factor and transport losses to push the efficiency to the thermodynamic limit.
Auf der Grundlage von Sonnenphotometermessungen an drei Messstationen (AWIPEV/ Koldewey in Ny-Ålesund (78.923 °N, 11.923 °O) 1995–2008, 35. Nordpol Driftstation – NP-35 (84.3–85.5 °N, 41.7–56.6 °O) März/April 2008, Sodankylä (67.37 °N, 26.65 °O) 2004–2007) wird die Aerosolvariabilität in der europäischen Arktis und deren Ursachen untersucht. Der Schwerpunkt liegt dabei auf der Frage des Zusammenhanges zwischen den an den Stationen gemessenen Aerosolparametern (Aerosol optische Dicke, Angström Koeffizient, usw.) und dem Transport des Aerosols sowohl auf kurzen Zeitskalen (Tagen) als auch auf langen Zeitskalen (Monate, Jahre). Um diesen Zusammenhang herzustellen, werden für die kurzen Zeitskalen mit dem Trajektorienmodell PEP-Tracer 5-Tage Rückwärtstrajektorien in drei Starthöhen (850 hPa, 700 hPa, 500 hPa) für die Uhrzeiten 00, 06, 12 und 18 Uhr berechnet. Mit Hilfe der nicht-hierarchischen Clustermethode k-means werden die berechneten Rückwärtstrajektorien dann zu Gruppen zusammengefasst und bestimmten Quellgebieten und den gemessenen Aerosol optischen Dicken zugeordnet. Die Zuordnung von Aerosol optischer Dicke und Quellregion ergibt keinen eindeutigen Zusammenhang zwischen dem Transport verschmutzter Luftmassen aus Europa oder Russland bzw. Asien und erhöhter Aerosol optischer Dicke. Dennoch ist für einen konkreten Einzelfall (März 2008) ein direkter Zusammenhang von Aerosoltransport und hohen Aerosol optischen Dicken nachweisbar. In diesem Fall gelangte Waldbrandaerosol aus Südwestrussland in die Arktis und konnte sowohl auf der NP-35 als auch in Ny-Ålesund beobachtet werden. In einem weiteren Schritt wird mit Hilfe der EOF-Analyse untersucht, inwieweit großskalige atmosphärische Zirkulationsmuster für die Aerosolvariabilität in der europäischen Arktis verantwortlich sind. Ähnlich wie bei der Trajektorienanalyse ist auch die Verbindung der atmosphärischen Zirkulation zu den Photometermessungen an den Stationen in der Regel nur schwach ausgeprägt. Eine Ausnahme findet sich bei der Betrachtung des Jahresganges des Bodendruckes und der Aerosol optischen Dicke. Hohe Aerosol optische Dicken treten im Frühjahr zum einen dann auf, wenn durch das Islandtief und das sibirische Hochdruckgebiet Luftmassen aus Europa oder Russland/Asien in die Arktis gelangen, und zum anderen, wenn sich ein kräftiges Hochdruckgebiet über Grönland und weiten Teilen der Arktis befindet. Ebenso zeigt sich, dass der Übergang zwischen Frühjahr und Sommer zumindest teilweise bedingt ist durch denWechsel vom stabilen Polarhoch im Winter und Frühjahr zu einer stärker von Tiefdruckgebieten bestimmten arktischen Atmosphäre im Sommer. Die geringere Aerosolkonzentration im Sommer kann zum Teil mit einer Zunahme der nassen Deposition als Aerosolsenke begründet werden. Für Ny-Ålesund wird neben den Transportmustern auch die chemische Zusammensetzung des Aerosols mit Hilfe von Impaktormessungen an der Zeppelinstation auf dem Zeppelinberg (474m ü.NN) nahe Ny-Ålesund abgeleitet. Dabei ist die positive Korrelation der Aerosoloptischen Dicke mit der Konzentration von Sulfationen und Ruß sehr deutlich. Beide Stoffe gelangen zu einem Großteil durch anthropogene Emissionen in die Atmosphäre. Die damit nachweisbar anthropogen geprägte Zusammensetzung des arktischen Aerosols steht im Widerspruch zum nicht eindeutig herstellbaren Zusammenhang mit dem Transport des Aerosols aus Industrieregionen. Dies kann nur durch einen oder mehrere gleichzeitig stattfindende Transformationsprozesse (z. B. Nukleation von Schwefelsäurepartikeln) während des Transportes aus den Quellregionen (Europa, Russland) erklärt werden.
Organische Halbleiter besitzen neue, bemerkenswerte Materialeigenschaften, die sie für die grundlegende Forschung wie auch aktuelle technologische Entwicklung (bsw. org. Leuchtdioden, org. Solarzellen) interessant werden lassen. Aufgrund der starken konformative Freiheit der konjugierten Polymerketten führt die Vielzahl der möglichen Anordnungen und die schwache intermolekulare Wechselwirkung für gewöhnlich zu geringer struktureller Ordnung im Festkörper. Die Morphologie hat gleichzeitig direkten Einfluss auf die elektronische Struktur der organischen Halbleiter, welches sich meistens in einer deutlichen Reduktion der Ladungsträgerbeweglichkeit gegenüber den anorganischen Verwandten zeigt. So stellt die Beweglichkeit der Ladungen im Halbleiter einen der limitierenden Faktoren für die Leistungsfähigkeit bzw. den Wirkungsgrad von funktionellen organischen Bauteilen dar. Im Jahr 2009 wurde ein neues auf Naphthalindiimid und Bithiophen basierendes Dornor/Akzeptor Copolymer vorgestellt [P(NDI2OD‑T2)], welches sich durch seine außergewöhnlich hohe Ladungsträgermobilität auszeichnet. In dieser Arbeit wird die Ladungsträgermobilität in P(NDI2OD‑T2) bestimmt, und der Transport durch eine geringe energetischer Unordnung charakterisiert. Obwohl dieses Material zunächst als amorph beschrieben wurde zeigt eine detaillierte Analyse der optischen Eigenschaften von P(NDI2OD‑T2), dass bereits in Lösung geordnete Vorstufen supramolekularer Strukturen (Aggregate) existieren. Quantenchemische Berechnungen belegen die beobachteten spektralen Änderungen. Mithilfe der NMR-Spektroskopie kann die Bildung der Aggregate unabhängig von optischer Spektroskopie bestätigt werden. Die Analytische Ultrazentrifugation an P(NDI2OD‑T2) Lösungen legt nahe, dass sich die Aggregation innerhalb der einzelnen Ketten unter Reduktion des hydrodynamischen Radius vollzieht. Die Ausbildung supramolekularen Strukturen nimmt auch eine signifikante Rolle bei der Filmbildung ein und verhindert gleichzeitig die Herstellung amorpher P(NDI2OD‑T2) Filme. Durch chemische Modifikation der P(NDI2OD‑T2)-Kette und verschiedener Prozessierungs-Methoden wurde eine Änderung des Kristallinitätsgrades und gleichzeitig der Orientierung der kristallinen Domänen erreicht und mittels Röntgenbeugung quantifiziert. In hochauflösenden Elektronenmikroskopie-Messungen werden die Netzebenen und deren Einbettung in die semikristallinen Strukturen direkt abgebildet. Aus der Kombination der verschiedenen Methoden erschließt sich ein Gesamtbild der Nah- und Fernordnung in P(NDI2OD‑T2). Über die Messung der Elektronenmobilität dieser Schichten wird die Anisotropie des Ladungstransports in den kristallographischen Raumrichtungen von P(NDI2OD‑T2) charakterisiert und die Bedeutung der intramolekularen Wechselwirkung für effizienten Ladungstransport herausgearbeitet. Gleichzeitig wird deutlich, wie die Verwendung von größeren und planaren funktionellen Gruppen zu höheren Ladungsträgermobilitäten führt, welche im Vergleich zu klassischen semikristallinen Polymeren weniger sensitiv auf die strukturelle Unordnung im Film sind.
Gold at the nanoscale
(2020)
In this cumulative dissertation, I want to present my contributions to the field of plasmonic nanoparticle science. Plasmonic nanoparticles are characterised by resonances of the free electron gas around the spectral range of visible light. In recent years, they have evolved as promising components for light based nanocircuits, light harvesting, nanosensors, cancer therapies, and many more.
This work exhibits the articles I authored or co-authored in my time as PhD student at the University of Potsdam. The main focus lies on the coupling between localised plasmons and excitons in organic dyes. Plasmon–exciton coupling brings light–matter coupling to the nanoscale. This size reduction is accompanied by strong enhancements of the light field which can, among others, be utilised to enhance the spectroscopic footprint of molecules down to single molecule detection, improve the efficiency of solar cells, or establish lasing on the nanoscale. When the coupling exceeds all decay channels, the system enters the strong coupling regime. In this case, hybrid light–matter modes emerge utilisable as optical switches, in quantum networks, or as thresholdless lasers. The present work investigates plasmon–exciton coupling in gold–dye core–shell geometries and contains both fundamental insights and technical novelties. It presents a technique which reveals the anticrossing in coupled systems without manipulating the particles themselves. The method is used to investigate the relation between coupling strength and particle size. Additionally, the work demonstrates that pure extinction measurements can be insufficient when trying to assess the coupling regime. Moreover, the fundamental quantum electrodynamic effect of vacuum induced saturation is introduced. This effect causes the vacuum fluctuations to diminish the polarisability of molecules and has not yet been considered in the plasmonic context.
The work additionally discusses the reaction of gold nanoparticles to optical heating. Such knowledge is of great importance for all potential optical applications utilising plasmonic nanoparticles since optical excitation always generates heat. This heat can induce a change in the optical properties, but also mechanical changes up to melting can occur. Here, the change of spectra in coupled plasmon–exciton particles is discussed and explained with a precise model. Moreover, the work discusses the behaviour of gold nanotriangles exposed to optical heating. In a pump–probe measurement, X-ray probe pulses directly monitored the particles’ breathing modes. In another experiment, the triangles were exposed to cw laser radiation with varying intensities and illumination areas. X-ray diffraction directly measured the particles’ temperature. Particle melting was investigated with surface enhanced Raman spectroscopy and SEM imaging demonstrating that larger illumination areas can cause melting at lower intensities. An elaborate methodological and theoretical introduction precedes the articles. This way, also readers without specialist’s knowledge get a concise and detailed overview of the theory and methods used in the articles. I introduce localised plasmons in metal nanoparticles of different shapes. For this work, the plasmons were mostly coupled to excitons in J-aggregates. Therefore, I discuss these aggregates of organic dyes with sharp and intense resonances and establish an understanding of the coupling between the two systems. For ab initio simulations of the coupled systems, models for the systems’ permittivites are presented, too. Moreover, the route to the sample fabrication – the dye coating of gold nanoparticles, their subsequent deposition on substrates, and the covering with polyelectrolytes – is presented together with the measurement methods that were used for the articles.
The current generation of ground-based instruments has rapidly extended the limits of the range accessible to us with very-high-energy (VHE) gamma-rays, and more than a hundred sources have now been detected in the Milky Way. These sources represent only the tip of the iceberg, but their number has reached a level that allows population studies. In this work, a model of the global population of VHE gamma-ray sources based on the most comprehensive census of Galactic sources in this energy regime, the H.E.S.S. Galactic plane survey (HGPS), will be presented. A population synthesis approach was followed in the construction of the model. Particular attention was paid to correcting for the strong observational bias inherent in the sample of detected sources. The methods developed for estimating the model parameters have been validated with extensive Monte Carlo simulations and will be shown to provide unbiased estimates of the model parameters. With these methods, five models for different spatial distributions of sources have been constructed. To test the validity of these models, their predictions for the composition of sources within the sensitivity range of the HGPS are compared with the observed sample. With one exception, similar results are obtained for all spatial distributions, showing that the observed longitude profile and the source distribution over photon flux are in fair agreement with observation. Regarding the latitude profile and the source distribution over angular extent, it becomes apparent that the model needs to be further adjusted to bring its predictions in agreement with observation. Based on the model, predictions of the global properties of the Galactic population of VHE gamma-ray sources and the prospects of the Cherenkov Telescope Array (CTA) will be presented.
CTA will significantly increase our knowledge of VHE gamma-ray sources by lowering the threshold for source detection, primarily through a larger detection area compared to current-generation instruments. In ground-based gamma-ray astronomy, the sensitivity of an instrument depends strongly, in addition to the detection area, on the ability to distinguish images of air showers produced by gamma-rays from those produced by cosmic rays, which are a strong background. This means that the number of detectable sources depends on the background rejection algorithm used and therefore may also be increased by improving the performance of such algorithms. In this context, in addition to the population model, this work presents a study on the application of deep-learning techniques to the task of gamma-hadron separation in the analysis of data from ground-based gamma-ray instruments. Based on a systematic survey of different neural-network architectures, it is shown that robust classifiers can be constructed with competitive performance compared to the best existing algorithms. Despite the broad coverage of neural-network architectures discussed, only part of the potential offered by the
application of deep-learning techniques to the analysis of gamma-ray data is exploited in the context of this study. Nevertheless, it provides an important basis for further research on this topic.
Ziel dieser Arbeit ist die phänomenologische Untersuchung der Feuchteempfindlichkeit der elektrischen Eigenschaften dünner Polymerschichten. Diese Untersuchungen stellen gleichzeitig Vorarbeiten zur Entwicklung von Prototypen von zwei polymeren Dünnschicht-Feuchtesensoren dar, die sich durch die spezielle Auswahl der feuchtesensitiven Materialien jeweils durch eine besondere Eigenschaft gegenüber kommerziellen Massenprodukten auszeichnen. Ziel der Entwicklungsarbeiten für den ersten Prototypen war die Konstruktion eines schnellen Feuchtesensors, der plötzliche und sprunghafte Feuchteänderungen in der umgebenden Atmosphäre möglichst rasch detektieren kann. Dafür wurden dünne Schichten von Poly-DADMAC auf Interdigitalstrukturen aufgebracht, die einen möglichst direkten Kontakt zwischen feuchtesensitiver Schicht und umgebender, feuchter Atmosphäre gewährleisten. Als Messgrößen dienten die Wechselstromgrößen Widerstand und Kapazität der Schichten. Die Feuchtekennlinien der Schichten zeigen gute Konstanz und hohe Reproduzierbarkeit. Der Widerstand der Schichten ändert sich durch den Einfluss von Feuchte je nach Schichtdicke um 3 bis 5 Größenordnungen und eignet sich als Messgröße für die Feuchtigkeit im gesamten Feuchtebereich. Die Hysterese der Filme konnte auf kleiner als 2,5% r.F. bestimmt werden, die Reproduzierbarkeit auf besser als 1% r.F. Die Ansprechzeit der Schichten lässt sich schichtdickenabhängig zu 1 bis 10 Sekunden bestimmen. Hierbei zeigen besonders die dünnen Schichten kurze Ansprechzeiten. Zielstellung für den zweiten Feuchtesensor war die Entwicklung eines Prototypen, dessen sensitive Schicht sich biostatisch und biozid verhält, so dass er in biotischen Umgebungen eingesetzt werden kann. Es wurden fünf Polysulfobetaine synthetisiert, deren Biozidität und Biostatik mit dem Kontakttest nach Rönnpagel, dem ISO846-Test und Abbautests bestimmt wurde. Zwei Polymere – Poly-DMMAAPS (BT2) und Poly-[MSA-Styren-Sulfobetain] (BT5) – erwiesen sich als ausreichend biozid und biostatisch. Schichten dieser Polymere wurden auf Interdigitalstrukturen aufgezogen, anschließend wurden die Kennlinien dieser Proben aufgenommen. Die Messwerte zeigen für beide Polymere gute Konstanz und eine hohe Reproduzierbarkeit. BT2-Proben sind zwischen 20% und 80% r.F. besonders empfindlich und zeigen über einen Monat keine Langzeitdrift. Vernetzte Proben zeigen bis 50°C keinen temperaturbedingten Abfall der Feuchteempfindlichkeit. Der Einsatz vernetzter BT5-Schichten als kapazitiver Feuchtesensor ist bis etwa 70°C möglich, die Schichten sind selbst nach Lagerung im Hochvakuum und mehrfacher Betauung stabil. Damit liegen zwei funktionsfähige Prototypen von Feuchtesensoren vor, für die die meisten Kennwerte denen von vergleichbaren kommerziellen Feuchtesensoren entsprechen. Gleichzeitig zeichnen sie sich aber durch eine sehr niedrige Ansprechzeit bzw. eine ausreichende Lebensdauer unter biotischen Bedingungen aus.
While the majority of very massive stars is clearly found in clusters, there are also very massive objects not associated with any cluster, suggesting they may have been born in isolation. In order to gain more insights, we studied the regions around two WR stars in the Galactic Center region. To understand the nature of the potential cluster around massive stars, photometry alone is not sufficient. We therefore used the ESO VLT/SINFONI integral field spectrograph to obtain photometry and spectra for the whole region around our two candidate stars. In total, more than 60 stars have been found and assigned a spectral type.
Despite remarkable progress made in the past century, which has revolutionized our understanding of the universe, there are numerous open questions left in theoretical physics. Particularly important is the fact that the theories describing the fundamental interactions of nature are incompatible. Einstein's theory of general relative describes gravity as a dynamical spacetime, which is curved by matter and whose curvature determines the motion of matter. On the other hand we have quantum field theory, in form of the standard model of particle physics, where particles interact via the remaining interactions - electromagnetic, weak and strong interaction - on a flat, static spacetime without gravity. A theory of quantum gravity is hoped to cure this incompatibility by heuristically replacing classical spacetime by quantum spacetime'. Several approaches exist attempting to define such a theory with differing underlying premises and ideas, where it is not clear which is to be preferred. Yet a minimal requirement is the compatibility with the classical theory, they attempt to generalize. Interestingly many of these models rely on discrete structures in their definition or postulate discreteness of spacetime to be fundamental. Besides the direct advantages discretisations provide, e.g. permitting numerical simulations, they come with serious caveats requiring thorough investigation: In general discretisations break fundamental diffeomorphism symmetry of gravity and are generically not unique. Both complicates establishing the connection to the classical continuum theory. The main focus of this thesis lies in the investigation of this relation for spin foam models. This is done on different levels of the discretisation / triangulation, ranging from few simplices up to the continuum limit. In the regime of very few simplices we confirm and deepen the connection of spin foam models to discrete gravity. Moreover, we discuss dynamical, e.g. diffeomorphism invariance in the discrete, to fix the ambiguities of the models. In order to satisfy these conditions, the discrete models have to be improved in a renormalisation procedure, which also allows us to study their continuum dynamics. Applied to simplified spin foam models, we uncover a rich, non--trivial fixed point structure, which we summarize in a phase diagram. Inspired by these methods, we propose a method to consistently construct the continuum theory, which comes with a unique vacuum state.
The forcing from the anthropogenic heat flux (AHF), i.e. the dissipation of primary energy consumed by the human civilisation, produces a direct climate warming. Today, the globally averaged AHF is negligibly small compared to the indirect forcing from greenhouse gas emissions. Locally or regionally, though, it has a significant impact. Historical observations show a constant exponential growth of worldwide energy production. A continuation of this trend might be fueled or even amplified by the exploration of new carbon-free energy sources like fusion power. In such a scenario, the impacts of the AHF become a relevant factor for anthropogenic post-greenhouse gas climate change on the global scale, as well.
This master thesis aims at estimating the climate impacts of such a growing AHF forcing. In the first part of this work, the AHF is built into simple and conceptual, zero- and one-dimensional Energy Balance Models (EBMs), providing quick order of magnitude estimations of the temperature impact. In the one-dimensional EBM, the ice-albedo feedback from enhanced ice melting due to the AHF increases the temperature impact significantly compared to the zero-dimensional EBM.
Additionally, the forcing is built into a climate model of intermediate complexity, CLIMBER-3α. This allows for the investigation of the effect of localised AHF and gives further insights into the impact of the AHF on processes like the ocean heat uptake, sea ice and snow pattern changes
and the ocean circulation.
The global mean temperature response from the AHF today is of the order of 0.010 − 0.016 K in all reasonable model configurations tested. A transient tenfold increase of this forcing heats up the Earth System additionally by roughly 0.1 − 0.2 K in the presented models. Further growth
can also affect the tipping probability of certain climate elements.
Most renewable energy sources do not or only partially contribute to the AHF forcing as the energy from these sources dissipates anyway. Hence, the transition to a (carbon-free) renewable energy mix, which, in particular, does not rely on nuclear power, eliminates the local and global climate impacts from the increasing AHF forcing, independent of the growth of energy production.
Gasausströmungen, oft in der Form hoch kollimierter Jets, sind ein allgegenwärtiges Phänomen bei der Geburt neuer Sterne. Emission von stossangeregtem molekularem Wasserstoff bei Wellenlängen im nahen Infrarotbereich ist ein Merkmal ihrer Existenz und auch in eingebetteten, im Optischen obskurierten Ausströmungen generell gut zu beobachten. In dieser Arbeit werden die Resultate einer von Auswahleffekten freien, empfindlichen, grossflächigen Suche nach solchen Ausströmungen von Protosternen in der v=1-0 S(1) Linie molekularen Wasserstoffs bei einer Wellenlänge von 2.12 µm vorgestellt. Die Durchmusterung umfasst eine Fläche von etwa einem Quadratgrad in der Orion A Riesenmolekülwolke. Weitere Daten aus einem grossen Wellenlängenbereich werden benutzt, um die Quellen der Ausströmungen zu identifizieren. Das Ziel dieser Arbeit ist es, eine Stichprobe von Ausströmungen zu bekommen, die so weit wie möglich frei von Auswahleffekten ist, um die typischen Eigenschaften protostellarer Ausströmungen und deren Entwicklung festzustellen, sowie um die Rückwirkung der Ausströmungen auf die umgebende Wolke zu untersuchen. Das erste Ergebnis ist, dass Ausströmungen in Sternentstehungsgebieten tatsächlich sehr häufig sind: mehr als 70 Jet-Kandidaten werden identifiziert. Die meisten zeigen eine sehr irreguläre Morphologie anstelle regulärer oder symmetrischer Strukturen. Dies ist auf das turbulente, klumpige Medium zurückzuführen, in das sich die Jets hineinbewegen. Die Ausrichtung der Jets ist zufällig verteilt. Insbesondere gibt es keine bevorzugte Ausrichtung der Jets parallel zum grossräumigen Magnetfeld in der Wolke. Das legt nahe, dass die Rotations- und Symmetrieachse in einem protostellaren System durch zufällige, turbulente Bewegung in der Wolke bestimmt wird. Mögliche Ausströmungsquellen werden für 49 Jets identifiziert; für diese wird der Entwicklungsstand und die bolometrische Leuchtkraft abgeschätzt. Die Jetlänge und die H2 Leuchtkraft entwickeln sich gemeinsam mit der Ausströmungsquelle. Von null startend, dehnen sich die Jets schnell bis auf eine Länge von einigen Parsec aus und werden dann langsam wieder kürzer. Sie sind zuerst sehr leuchtkräftig, die H2 Helligkeit nimmt aber im Lauf der protostellaren Entwicklung ab. Die Längen- und H2 Leuchtkraftentwicklung lässt sich im Wesentlichen durch eine zuerst sehr hohe, dann niedriger werdende Massenausflussrate erklären, die auf eine zuerst sehr hohe, dann niedriger werdende Gasakkretionsrate auf den Protostern schliessen lässt (Akkretion und Ejektion sind eng verknüpft!). Die Längenabnahme der Jets erfordert eine ständig wirkende Abbremsung der Jets. Ein einfaches Modell einer simultanen Entwicklung eines Protosterns, seiner zirkumstellaren Umgebung und seiner Ausströmung (Smith 2000) kann die gemessenen H2- und bolometrischen Leuchtkräfte der Jets und ihrer Quellen reproduzieren, unter der Annahme, dass die starke Akkretionsaktivität zu Beginn der protostellaren Entwicklung mit einer überproportional hohen Massenausflussrate verbunden ist. Im Durchmusterungsgebiet sind 125 dichte Molekülwolkenkerne bekannt (Tatematsu et al. 1993). Jets (bzw. Sterne) entstehen in ruhigen Wolkenkernen, d.h. solchen mit einem niedrigen Verhältnis von interner kinetischer Energie zu gravitativer potentieller Energie; dies sind die Wolkenkerne höherer Masse. Die Wolkenkerne mit Jets haben im Mittel grössere Linienbreiten als die ohne Jets. Dies ist darauf zurückzuführen, dass sie bevorzugt in den massereicheren Wolkenkernen zu finden sind, welche generell eine grössere Linienbreite haben. Es gibt keinen Hinweis auf stärkere interne Bewegungen in Wolkenkernen mit Jets, die durch eine Wechselwirkung der Jets mit den Wolkenkernen erzeugt sein könnte. Es gibt, wie von der Theorie vorausgesagt, eine Beziehung zwischen der Linienbreite der Wolkenkerne und der H2 Leuchtkraft der Jets, wenn Jets von Klasse 0 und Klasse I Protosternen separat betrachtet werden; dabei sind Klasse 0 Jets leuchtkräftiger als Klasse I Jets, was ebenfalls auf eine zeitabhängige Akkretionsrate mit einer frühzeitigen Spitze und einem darauffolgenden Abklingen hinweist. Schliesslich wird die Rückwirkung der Jetpopulation auf eine Molekülwolke unter der Annahme strikter Vorwärtsimpulserhaltung betrachtet. Die Jets können auf der Skala einer ganzen Riesenmolekülwolke und auf den Skalen von Molekülwolkenkernen nicht genügend Impuls liefern, um die abklingende Turbulenz wieder anzuregen. Auf der mittleren Skala von molekularen Klumpen, mit einer Grösse von einigen parsec und Massen von einigen hundert Sonnenmassen liefern die Jets jedoch genügend Impuls in hinreichend kurzer Zeit, um die Turbulenz “am Leben zu erhalten” und können damit helfen, einen Klumpen gegen seinen Kollaps zu stabilisieren.
Actin is one of the most highly conserved proteins in eukaryotes and distinct actin-related proteins with filament-forming properties are even found in prokaryotes. Due to these commonalities, actin-modulating proteins of many species share similar structural properties and proposed functions. The polymerization and depolymerization of actin are critical processes for a cell as they can contribute to shape changes to adapt to its environment and to move and distribute nutrients and cellular components within the cell. However, to what extent functions of actin-binding proteins are conserved between distantly related species, has only been addressed in a few cases. In this work, functions of Coronin-A (CorA) and Actin-interacting protein 1 (Aip1), two proteins involved in actin dynamics, were characterized. In addition, the interchangeability and function of Aip1 were investigated in two phylogenetically distant model organisms. The flowering plant Arabidopsis thaliana (encoding two homologs, AIP1-1 and AIP1-2) and in the amoeba Dictyostelium discoideum (encoding one homolog, DdAip1) were chosen because the functions of their actin cytoskeletons may differ in many aspects. Functional analyses between species were conducted for AIP1 homologs as flowering plants do not harbor a CorA gene.
In the first part of the study, the effect of four different mutation methods on the function of Coronin-A protein and the resulting phenotype in D. discoideum was revealed in two genetic knockouts, one RNAi knockdown and a sudden loss-of-function mutant created by chemical-induced dislocation (CID). The advantages and disadvantages of the different mutation methods on the motility, appearance and development of the amoebae were investigated, and the results showed that not all observed properties were affected with the same intensity. Remarkably, a new combination of Selection-Linked Integration and CID could be established.
In the second and third parts of the thesis, the exchange of Aip1 between plant and amoeba was carried out. For A. thaliana, the two homologs (AIP1-1 and AIP1-2) were analyzed for functionality as well as in D. discoideum. In the Aip1-deficient amoeba, rescue with AIP1-1 was more effective than with AIP1-2. The main results in the plant showed that in the aip1-2 mutant background, reintroduced AIP1-2 displayed the most efficient rescue and A. thaliana AIP1-1 rescued better than DdAip1. The choice of the tagging site was important for the function of Aip1 as steric hindrance is a problem. The DdAip1 was less effective when tagged at the C-terminus, while the plant AIP1s showed mixed results depending on the tag position. In conclusion, the foreign proteins partially rescued phenotypes of mutant plants and mutant amoebae, despite the organisms only being very distantly related in evolutionary terms.
Investigation of tropospheric arctic aerosol and mixed-phase clouds using airborne lidar technique
(2005)
An Airborne Mobile Aerosol Lidar (AMALi) was constructed and built at Alfred-Wegener-Institute for Polar and Marine Research (AWI) in Potsdam, Germany for the lower tropospheric aerosol and cloud research under tough arctic conditions. The system was successfully used during two AWI airborne field campaigns, ASTAR 2004 and SVALEX 2005, performed in vicinity of Spitsbergen in the Arctic. The novel evaluation schemes, the Two-Stream Inversion and the Iterative Airborne Inversion, were applied to the obtained lidar data. Thereby, calculation of the particle extinction and backscatter coefficient profiles with corresponding lidar ratio profiles characteristic for the arctic air was possible. The comparison of these lidar results with the results of other in-situ and remote instrumentation (ground based Koldewey Aerosol Raman Lidar (KARL), sunphotometer, radiosounding, satellite imagery) allowed to provided clean contra polluted (Arctic Haze) characteristics of the arctic aerosols. Moreover, the data interpretation by means of the ECMWF Operational Analyses and small-scale dispersion model EULAG allowed studying the effects of the Spitsbergens orography on the aerosol load in the Planetary Boundary Layer. With respect to the cloud studies a new methodology of alternated remote AMALi measurements with the airborne in-situ cloud optical and microphysical parameters measurements was proved feasible for the low density mixed-phase cloud studies. An example of such approach during observation of the natural cloud seeding (feeder-seeder phenomenon) with ice crystals precipitating into the lower supercooled stratocumulus deck were discussed in terms of the lidar signal intensity profiles and corresponding depolarisation ratio profiles. For parts of the cloud system characterised by almost negligible multiple scattering the calculation of the particle backscatter coefficient profiles was possible using the lidar ratio information obtained from the in-situ measurements in ice-crystal cloud and water cloud.
The main objective of this work is to investigate the evolution of massive stars, and the interplay between them and the ionized gas for a sample of local metal-poor Wolf-Rayet galaxies.
Optical integral field spectrocopy was used in combination with multi-wavelength radio data.
Combining optical and radio data, we locate Wolf-Rayet stars and supernova remnants across the Wolf-Rayet galaxies to study the spatial correlation between them. This study will shed light on the massive star formation and its feedback, and will help us to better understand
distant star-forming galaxies.
Astandard approach to study time-dependent stochastic processes is the power spectral density (PSD), an ensemble-averaged property defined as the Fourier transform of the autocorrelation function of the process in the asymptotic limit of long observation times, T → ∞. In many experimental situations one is able to garner only relatively few stochastic time series of finite T, such that practically neither an ensemble average nor the asymptotic limit T → ∞ can be achieved. To accommodate for a meaningful analysis of such finite-length data we here develop the framework of single-trajectory spectral analysis for one of the standard models of anomalous diffusion, scaled Brownian motion.Wedemonstrate that the frequency dependence of the single-trajectory PSD is exactly the same as for standard Brownian motion, which may lead one to the erroneous conclusion that the observed motion is normal-diffusive. However, a distinctive feature is shown to be provided by the explicit dependence on the measurement time T, and this ageing phenomenon can be used to deduce the anomalous diffusion exponent.Wealso compare our results to the single-trajectory PSD behaviour of another standard anomalous diffusion process, fractional Brownian motion, and work out the commonalities and differences. Our results represent an important step in establishing singletrajectory PSDs as an alternative (or complement) to analyses based on the time-averaged mean squared displacement.
Anomalous-diffusion, the departure of the spreading dynamics of diffusing particles from the traditional law of Brownian-motion, is a signature feature of a large number of complex soft-matter and biological systems. Anomalous-diffusion emerges due to a variety of physical mechanisms, e.g., trapping interactions or the viscoelasticity of the environment. However, sometimes systems dynamics are erroneously claimed to be anomalous, despite the fact that the true motion is Brownian—or vice versa. This ambiguity in establishing whether the dynamics as normal or anomalous can have far-reaching consequences, e.g., in predictions for reaction- or relaxation-laws. Demonstrating that a system exhibits normal- or anomalous-diffusion is highly desirable for a vast host of applications. Here, we present a criterion for anomalous-diffusion based on the method of power-spectral analysis of single trajectories. The robustness of this criterion is studied for trajectories of fractional-Brownian-motion, a ubiquitous stochastic process for the description of anomalous-diffusion, in the presence of two types of measurement errors. In particular, we find that our criterion is very robust for subdiffusion. Various tests on surrogate data in absence or presence of additional positional noise demonstrate the efficacy of this method in practical contexts. Finally, we provide a proof-of-concept based on diverse experiments exhibiting both normal and anomalous-diffusion.