Refine
Year of publication
- 2019 (257) (remove)
Document Type
- Doctoral Thesis (257) (remove)
Keywords
- Klimawandel (4)
- Spektroskopie (4)
- climate change (4)
- Biodiversität (3)
- adaptation (3)
- machine learning (3)
- movement ecology (3)
- spectroscopy (3)
- Anden (2)
- Andes (2)
Institute
- Institut für Biochemie und Biologie (54)
- Institut für Chemie (25)
- Institut für Geowissenschaften (24)
- Institut für Physik und Astronomie (21)
- Hasso-Plattner-Institut für Digital Engineering GmbH (13)
- Extern (12)
- Sozialwissenschaften (11)
- Wirtschaftswissenschaften (11)
- Historisches Institut (10)
- Department Linguistik (9)
Electrosynthesis and characterization of molecularly imprinted polymers for peptides and proteins
(2019)
This thesis covers the synthesis of conjugates of 2-Deoxy-D-ribose-5-phosphate aldolase (DERA) with suitable polymers and the subsequent immobilization of these conjugates in thin films via two different approaches.
2-Deoxy-D-ribose-5-phosphate aldolase (DERA) is a biocatalyst that is capable of converting acetaldehyde and a second aldehyde as acceptor into enantiomerically pure mono- and diyhydroxyaldehydes, which are important structural motifs in a number of pharmaceutically active compounds. Conjugation and immobilization renders the enzyme applicable for utilization in a continuously run biocatalytic process which avoids the common problem of product inhibition. Within this thesis, conjugates of DERA and poly(N-isopropylacrylamide) (PNIPAm) for immobilization via a self-assembly approach were synthesized and isolated, as well as conjugates with poly(N,N-dimethylacrylamide) (PDMAA) for a simplified and scalable spray-coating approach. For the DERA/PNIPAm-conjugates different synthesis routes were tested, including grafting-from and grafting-to, both being common methods for the conjugation. Furthermore, both lysines and cysteines were addressed for the conjugation in order to find optimum conjugation conditions. It turned out that conjugation via lysine causes severe activity loss as one lysine plays a key role in the catalyzing mechanism. The conjugation via the cysteines by a grafting-to approach using pyridyl disulfide (PDS) end-group functionalized polymers led to high conjugation efficiencies in the presence of polymer solubilizing NaSCN. The resulting conjugates maintained enzymatic activity and also gained high acetaldehyde tolerance which is necessary for their use later on in an industrial relevant process after their immobilization.
The resulting DERA/PNIPAm conjugates exhibited enhanced interfacial activity at the air/water interface compared to the single components, which is an important pre-requisite for the immobilization via the self-assembly approach. Conjugates with longer polymer chains formed homogeneous films on silicon wafers and glass slides while the ones with short chains could only form isolated aggregates. On top of that, long chain conjugates showed better activity maintenance upon the immobilization.
The crosslinking of conjugates, as well as their fixation on the support materials, are important for the mechanical stability of the films obtained from the self-assembly process. Therefore, in a second step, we introduced the UV-crosslinkable monomer DMMIBA to the PNIPAm polymers to be used for conjugation. The introduction of DMMIBA reduced the lower critical solution temperature (LCST) of the polymer and thus the water solubility at ambient conditions, resulting in lower conjugation efficiencies and in turn slightly poorer acetaldehyde tolerance of the resulting conjugates. Unlike the DERA/PNIPAm, the conjugates from the copolymer P(NIPAM-co-DMMIBA) formed continuous, homogenous films only after the crosslinking step via UV-treatment. For a firm binding of the crosslinked films, a functionalization protocol for the model support material cyclic olefin copolymer (COC) and the final target support, PAN based membranes, was developed that introduces analogue UV-reactive groups to the support surface. The conjugates immobilized on the modified COC films maintained enzymatic activity and showed good mechanical stability after several cycles of activity assessment. Conjugates with longer polymer chains, however, showed a higher degree of crosslinking after the UV-treatment leading to a pronounced loss of activity. A porous PAN membrane onto which the conjugates were immobilized as well, was finally transferred to a dead end filtration membrane module to catalyze the aldol reaction of the industrially relevant mixture of acetaldehyde and hexanal in a continuous mode. Mono aldol product was detectable, but yields were comparably low and the operational stability needs to be further improved
Another approach towards immobilization of DERA conjugates that was followed, was to generate the conjugates in situ by simply mixing enzyme and polymer and spray coat the mixture onto the membrane support. Compared to the previous approach, the focus was more put on simplicity and a possible scalability of the immobilization. Conjugates were thus only generated in-situ and not further isolated and characterized. For the conjugation, PDMAA equipped with N-2-thiolactone acrylamide (TlaAm) side chains was used, an amine-reactive comonomer that can react with the lysine residues of DERA, as well as with amino groups introduced to a desired support surface. Furthermore disulfide formation after hydrolysis of the Tla groups causes a crosslinking effect. The synthesized copolymer poly(N,N-Dimethylacrylamide-co-N-2-thiolactone acrylamide) (P(DMAA-co-TlaAm)) thus serves a multiple purpose including protein binding, crosslinking and binding to support materials. The mixture of DERA and polymer could be immobilized on the PAN support by spray-coating under partial maintenance of enzymatic activity. To improve the acetaldehyde tolerance, the polymer in used was further equipped with cysteine reactive PDS end-groups that had been used for the conjugation as described in the first part of the thesis. The generated conjugates indeed showed good acetaldehyde tolerance and were thus used to be coated onto PAN membrane supports. Post treatment with a basic aqueous solution of H2O2 was supposed to further crosslink the spray-coated film hydrolysis and oxidation of the thiolactone groups. However, a washing off of the material was observed. Optimization is thus still necessary.
Die funktionelle Charakterisierung von therapeutisch relevanten Proteinen kann bereits durch die Bereitstellung des Zielproteins in adäquaten Mengen limitierend sein. Dies trifft besonders auf Membranproteine zu, die aufgrund von zytotoxischen Effekten auf die Produktionszelllinie und der Tendenz Aggregate zu bilden, in niedrigen Ausbeuten an aktivem Protein resultieren können. Der lebende Organismus kann durch die Verwendung von translationsaktiven Zelllysaten umgangen werden- die Grundlage der zellfreien Proteinsynthese. Zu Beginn der Arbeit wurde die ATP-abhängige Translation eines Lysates auf der Basis von kultivierten Insektenzellen (Sf21) analysiert. Für diesen Zweck wurde ein ATP-bindendes Aptamer eingesetzt, durch welches die Translation der Nanoluziferase reguliert werden konnte. Durch die dargestellte Applizierung von Aptameren, könnten diese zukünftig in zellfreien Systemen für die Visualisierung der Transkription und Translation eingesetzt werden, wodurch zum Beispiel komplexe Prozesse validiert werden können.
Neben der reinen Proteinherstellung können Faktoren wie posttranslationale Modifikationen sowie eine Integration in eine lipidische Membran essentiell für die Funktionalität des Membranproteins sein. Im zweiten Abschnitt konnte, im zellfreien Sf21-System, für den G-Protein-gekoppelten Rezeptor Endothelin B sowohl eine Integration in die endogen vorhandenen Endoplasmatisch Retikulum-basierten Membranstrukturen als auch Glykosylierungen, identifiziert werden.
Auf der Grundlage der erfolgreichen Synthese des ET-B-Rezeptors wurden verschiedene Methoden zur Fluoreszenzmarkierung des Adenosin-Rezeptors A2a (Adora2a) angewandt und optimiert. Im dritten Abschnitt wurde der Adora2a mit Hilfe einer vorbeladenen tRNA, welche an eine fluoreszierende Aminosäure gekoppelt war, im zellfreien Chinesischen Zwerghamster Ovarien (CHO)-System markiert. Zusätzlich konnte durch den Einsatz eines modifizierten tRNA/Aminoacyl-tRNA-Synthetase-Paares eine nicht-kanonische Aminosäure an Position eines integrierten Amber-Stopcodon in die Polypeptidkette eingebaut und die funktionelle Gruppe im Anschluss an einen Fluoreszenzfarbstoff gekoppelt werden. Aufgrund des offenen Charakters eignen sich zellfreie Proteinsynthesesysteme besonders für eine Integration von exogenen Komponenten in den Translationsprozess. Mit Hilfe der Fluoreszenzmarkierung wurde eine ligandvermittelte Konformationsänderung im Adora2a über einen Biolumineszenz-Resonanzenergietransfer detektiert. Durch die Etablierung der Amber-Suppression wurde darüber hinaus das Hormon Erythropoetin pegyliert, wodurch Eigenschaften wie Stabilität und Halbwertszeit des Proteins verändert wurden.
Zu guter Letzt wurde ein neues tRNA/Aminoacyl-tRNA-Synthetase-Paar auf Basis der Methanosarcina mazei Pyrrolysin-Synthetase etabliert, um das Repertoire an nicht-kanonischen Aminosäuren und den damit verbundenen Kopplungsreaktionen zu erweitern. Zusammenfassend wurden die Potenziale zellfreier Systeme in Bezug auf der Herstellung von komplexen Membranproteinen und der Charakterisierung dieser durch die Einbringung einer positionsspezifischen Fluoreszenzmarkierung verdeutlicht, wodurch neue Möglichkeiten für die Analyse und Funktionalisierung von komplexen Proteinen geschaffen wurden.
Interactions and feedbacks between tectonics, climate, and upper plate architecture control basin geometry, relief, and depositional systems. The Andes is part of a longlived continental margin characterized by multiple tectonic cycles which have strongly modified the Andean upper plate architecture. In the Andean retroarc, spatiotemporal variations in the structure of the upper plate and tectonic regimes have resulted in marked along-strike variations in basin geometry, stratigraphy, deformational style, and mountain belt morphology. These along-strike variations include high-elevation plateaus (Altiplano and Puna) associated with a thin-skin fold-and-thrust-belt and thick-skin deformation in broken foreland basins such as the Santa Barbara system and the Sierras Pampeanas. At the confluence of the Puna Plateau, the Santa Barbara system and the Sierras Pampeanas, major along-strike changes in upper plate architecture, mountain belt morphology, basement exhumation, and deformation style can be recognized. I have used a source to sink approach to unravel the spatiotemporal tectonic evolution of the Andean retroarc between 26 and 28°S. I obtained a large low-temperature thermochronology data set from basement units which includes apatite fission track, apatite U-Th-Sm/He, and zircon U-Th/He (ZHe) cooling ages. Stratigraphic descriptions of Miocene units were temporally constrained by U-Pb LA-ICP-MS zircon ages from interbedded pyroclastic material.
Modeled ZHe ages suggest that the basement of the study area was exhumed during the Famatinian orogeny (550-450 Ma), followed by a period of relative tectonic quiescence during the Paleozoic and the Triassic. The basement experienced horst exhumation during the Cretaceous development of the Salta rift. After initial exhumation, deposition of thick Cretaceous syn-rift strata caused reheating of several basement blocks within the Santa Barbara system. During the Eocene-Oligocene, the Andean compressional setting was responsible for the exhumation of several disconnected basement blocks. These exhumed blocks were separated by areas of low relief, in which humid climate and low erosion rates facilitated the development of etchplains on the crystalline basement. The exhumed basement blocks formed an Eocene to Oligocene broken foreland basin in the back-bulge depozone of the Andean foreland. During the Early Miocene, foreland basin strata filled up the preexisting Paleogene topography. The basement blocks in lower relief positions were reheated; associated geothermal gradients were higher than 25°C/km. Miocene volcanism was responsible for lateral variations on the amount of reheating along the Campo-Arenal basin. Around 12 Ma, a new deformational phase modified the drainage network and fragmented the lacustrine system. As deformation and rock uplift continued, the easily eroded sedimentary cover was efficiently removed and reworked by an ephemeral fluvial system, preventing the development of significant relief. After ~6 Ma, the low erodibility of the basement blocks which began to be exposed caused relief increase, leading to the development of stable fluvial systems. Progressive relief development modified atmospheric circulation, creating a rainfall gradient. After 3 Ma, orographic rainfall and high relief lead to the development of proximal fluvial-gravitational depositional systems in the surrounding basins.
Supercapacitors are electrochemical energy storage devices with rapid charge/discharge rate and long cycle life. Their biggest challenge is the inferior energy density compared to other electrochemical energy storage devices such as batteries. Being the most widely spread type of supercapacitors, electrochemical double-layer capacitors (EDLCs) store energy by electrosorption of electrolyte ions on the surface of charged electrodes. As a more recent development, Na-ion capacitors (NICs) are expected to be a more promising tactic to tackle the inferior energy density due to their higher-capacity electrodes and larger operating voltage. The charges are simultaneously stored by ion adsorption on the capacitive-type cathode surface and via faradic process in the battery-type anode, respectively. Porous carbon electrodes are of great importance in these devices, but the paramount problems are the facile synthetic routes for high-performance carbons and the lack of fundamental understanding of the energy storage mechanisms. Therefore, the aim of the present dissertation is to develop novel synthetic methods for (nitrogen-doped) porous carbon materials with superior performance, and to reveal a deeper understanding energy storage mechanisms of EDLCs and NICs.
The first part introduces a novel synthetic method towards hierarchical ordered meso-microporous carbon electrode materials for EDLCs. The large amount of micropores and highly ordered mesopores endow abundant sites for charge storage and efficient electrolyte transport, respectively, giving rise to superior EDLC performance in different electrolytes. More importantly, the controversial energy storage mechanism of EDLCs employing ionic liquid (IL) electrolytes is investigated by employing a series of porous model carbons as electrodes. The results not only allow to conclude on the relations between the porosity and ion transport dynamics, but also deliver deeper insights into the energy storage mechanism of IL-based EDLCs which is different from the one usually dominating in solvent-based electrolytes leading to compression double-layers.
The other part focuses on anodes of NICs, where novel synthesis of nitrogen-rich porous carbon electrodes and their sodium storage mechanism are investigated. Free-standing fibrous nitrogen-doped carbon materials are synthesized by electrospinning using the nitrogen-rich monomer (hexaazatriphenylene-hexacarbonitrile, C18N12) as the precursor followed by condensation at high temperature. These fibers provide superior capacity and desirable charge/discharge rate for sodium storage. This work also allows insights into the sodium storage mechanism in nitrogen-doped carbons. Based on this mechanism, further optimization is done by designing a composite material composed of nitrogen-rich carbon nanoparticles embedded in conductive carbon matrix for a better charge/discharge rate. The energy density of the assembled NICs significantly prevails that of common EDLCs while maintaining the high power density and long cycle life.
Modern health care systems are characterized by pronounced prevention and cost-optimized treatments. This dissertation offers novel empirical evidence on how useful such measures can be. The first chapter analyzes how radiation, a main pollutant in health care, can negatively affect cognitive health. The second chapter focuses on the effect of Low Emission Zones on public heath, as air quality is the major external source of health problems. Both chapters point out potentials for preventive measures. Finally, chapter three studies how changes in treatment prices affect the reallocation of hospital resources. In the following, I briefly summarize each chapter and discuss implications for health care systems as well as other policy areas. Based on the National Educational Panel Study that is linked to data on radiation, chapter one shows that radiation can have negative long-term effects on cognitive skills, even at subclinical doses. Exploiting arguably exogenous variation in soil contamination in Germany due to the Chernobyl disaster in 1986, the findings show that people exposed to higher radiation perform significantly worse in cognitive tests 25 years later. Identification is ensured by abnormal rainfall within a critical period of ten days. The results show that the effect is stronger among older cohorts than younger cohorts, which is consistent with radiation accelerating cognitive decline as people get older. On average, a one-standarddeviation increase in the initial level of CS137 (around 30 chest x-rays) is associated with a decrease in the cognitive skills by 4.1 percent of a standard deviation (around 0.05 school years). Chapter one shows that sub-clinical levels of radiation can have negative consequences even after early childhood. This is of particular importance because most of the literature focuses on exposure very early in life, often during pregnancy. However, population exposed after birth is over 100 times larger. These results point to substantial external human capital costs of radiation which can be reduced by choices of medical procedures. There is a large potential for reductions because about one-third of all CT scans are assumed to be not medically justified (Brenner and Hall, 2007). If people receive unnecessary CT scans because of economic incentives, this chapter points to additional external costs of health care policies. Furthermore, the results can inform the cost-benefit trade-off for medically indicated procedures. Chapter two provides evidence about the effectiveness of Low Emission Zones. Low Emission Zones are typically justified by improvements in population health. However, there is little evidence about the potential health benefits from policy interventions aiming at improving air quality in inner-cities. The chapter ask how the coverage of Low Emission Zones air pollution and hospitalization, by exploiting variation in the roll out of Low Emission Zones in Germany. It combines information on the geographic coverage of Low Emission Zones with rich panel data on the universe of German hospitals over the period from 2006 to 2016 with precise information on hospital locations and the annual frequency of detailed diagnoses. In order to establish that our estimates of Low Emission Zones’ health impacts can indeed be attributed to improvements in local air quality, we use data from Germany’s official air pollution monitoring system and assign monitor locations to Low Emission Zones and test whether measures of air pollution are affected by the coverage of a Low Emission Zone. Results in chapter two confirm former results showing that the introduction of Low Emission Zones improved air quality significantly by reducing NO2 and PM10 concentrations. Furthermore, the chapter shows that hospitals which catchment areas are covered by a Low Emission Zone, diagnose significantly less air pollution related diseases, in particular by reducing the incidents of chronic diseases of the circulatory and the respiratory system. The effect is stronger before 2012, which is consistent with a general improvement in the vehicle fleet’s emission standards. Depending on the disease, a one-standard-deviation increase in the coverage of a hospitals catchment area covered by a Low Emission Zone reduces the yearly number of diagnoses up to 5 percent. These findings have strong implications for policy makers. In 2015, overall costs for health care in Germany were around 340 billion euros, of which 46 billion euros for diseases of the circulatory system, making it the most expensive type of disease caused by 2.9 million cases (Statistisches Bundesamt, 2017b). Hence, reductions in the incidence of diseases of the circulatory system may directly reduce society’s health care costs. Whereas chapter one and two study the demand-side in health care markets and thus preventive potential, chapter three analyzes the supply-side. By exploiting the same hospital panel data set as in chapter two, chapter three studies the effect of treatment price shocks on the reallocation of hospital resources in Germany. Starting in 2005, the implementation of the German-DRG-System led to general idiosyncratic treatment price shocks for individual hospitals. Thus far there is little evidence of the impact of general price shocks on the reallocation of hospital resources. Additionally, I add to the exiting literature by showing that price shocks can have persistent effects on hospital resources even when these shocks vanish. However, simple OLS regressions would underestimate the true effect, due to endogenous treatment price shocks. I implement a novel instrument variable strategy that exploits the exogenous variation in the number of days of snow in hospital catchment areas. A peculiarity of the reform allowed variation in days of snow to have a persistent impact on treatment prices. I find that treatment price increases lead to increases in input factors such as nursing staff, physicians and the range of treatments offered but to decreases in the treatment volume. This indicates supplier-induced demand. Furthermore, the probability of hospital mergers and privatization decreases. Structural differences in pre-treatment characteristics between hospitals enhance these effects. For instance, private and larger hospitals are more affected. IV estimates reveal that OLS results are biased towards zero in almost all dimensions because structural hospital differences are correlated with the reallocation of hospital resources. These results are important for several reasons. The G-DRG-Reform led to a persistent polarization of hospital resources, as some hospitals were exposed to treatment price increases, while others experienced reductions. If hospitals increase the treatment volume as a response to price reductions by offering unnecessary therapies, it has a negative impact on population wellbeing and public spending. However, results show a decrease in the range of treatments if prices decrease. Hospitals might specialize more, thus attracting more patients. From a policy perspective it is important to evaluate if such changes in the range of treatments jeopardize an adequate nationwide provision of treatments. Furthermore, the results show a decrease in the number of nurses and physicians if prices decrease. This could partly explain the nursing crisis in German hospitals. However, since hospitals specialize more they might be able to realize efficiency gains which justify reductions in input factors without loses in quality. Further research is necessary to provide evidence for the impact of the G-DRG-Reform on health care quality. Another important aspect are changes in the organizational structure. Many public hospitals have been privatized or merged. The findings show that this is at least partly driven by the G-DRG-Reform. This can again lead to a lack in services offered in some regions if merged hospitals specialize more or if hospitals are taken over by ecclesiastical organizations which do not provide all treatments due to moral conviction. Overall, this dissertation reveals large potential for preventive health care measures and helps to explain reallocation processes in the hospital sector if treatment prices change. Furthermore, its findings have potentially relevant implications for other areas of public policy. Chapter one identifies an effect of low dose radiation on cognitive health. As mankind is searching for new energy sources, nuclear power is becoming popular again. However, results of chapter one point to substantial costs of nuclear energy which have not been accounted yet. Chapter two finds strong evidence that air quality improvements by Low Emission Zones translate into health improvements, even at relatively low levels of air pollution. These findings may, for instance, be of relevance to design further policies targeted at air pollution such as diesel bans. As pointed out in chapter three, the implementation of DRG-Systems may have unintended side-effects on the reallocation of hospital resources. This may also apply to other providers in the health care sector such as resident doctors.
Partial melting is a first order process for the chemical differentiation of the crust (Vielzeuf et al., 1990). Redistribution of chemical elements during melt generation crucially influences the composition of the lower and upper crust and provides a mechanism to concentrate and transport chemical elements that may also be of economic interest. Understanding of the diverse processes and their controlling factors is therefore not only of scientific interest but also of high economic importance to cover the demand for rare metals.
The redistribution of major and trace elements during partial melting represents a central step for the understanding how granite-bound mineralization develops (Hedenquist and Lowenstern, 1994). The partial melt generation and mobilization of ore elements (e.g. Sn, W, Nb, Ta) into the melt depends on the composition of the sedimentary source and melting conditions. Distinct source rocks have different compositions reflecting their deposition and alteration histories. This specific chemical “memory” results in different mineral assemblages and melting reactions for different protolith compositions during prograde metamorphism (Brown and Fyfe, 1970; Thompson, 1982; Vielzeuf and Holloway, 1988). These factors do not only exert an important influence on the distribution of chemical elements during melt generation, they also influence the volume of melt that is produced, extraction of the melt from its source, and its ascent through the crust (Le Breton and Thompson, 1988). On a larger scale, protolith distribution and chemical alteration (weathering), prograde metamorphism with partial melting, melt extraction, and granite emplacement are ultimately depending on a (plate-)tectonic control (Romer and Kroner, 2016). Comprehension of the individual stages and their interaction is crucial in understanding how granite-related mineralization forms, thereby allowing estimation of the mineralization potential of certain areas. Partial melting also influences the isotope systematics of melt and restite. Radiogenic and stable isotopes of magmatic rocks are commonly used to trace back the source of intrusions or to quantify mixing of magmas from different sources with distinct isotopic signatures (DePaolo and Wasserburg, 1979; Lesher, 1990; Chappell, 1996). These applications are based on the fundamental requirement that the isotopic signature in the melt reflects that of the bulk source from which it is derived. Different minerals in a protolith may have isotopic compositions of radiogenic isotopes that deviate from their whole rock signature (Ayres and Harris, 1997; Knesel and Davidson, 2002). In particular, old minerals with a distinct parent-to-daughter (P/D) ratio are expected to have a specific radiogenic isotope signature. As the partial melting reaction only involves selective phases in a protolith, the isotopic signature of the melt reflects that of the minerals involved in the melting reaction and, therefore, should be different from the bulk source signature. Similar considerations hold true for stable isotopes.
Ultrafast magnetisation dynamics have been investigated intensely for two decades. The recovery process after demagnetisation, however, was rarely studied experimentally and discussed in detail. The focus of this work lies on the investigation of the magnetisation on long timescales after laser excitation. It combines two ultrafast time resolved methods to study the relaxation of the magnetic and lattice system after excitation with a high fluence ultrashort laser pulse. The magnetic system is investigated by time resolved measurements of the magneto-optical Kerr effect. The experimental setup has been implemented in the scope of this work. The lattice dynamics were obtained with ultrafast X-ray diffraction. The combination of both techniques leads to a better understanding of the mechanisms involved in magnetisation recovery from a non-equilibrium condition. Three different groups of samples are investigated in this work: Thin Nickel layers capped with nonmagnetic materials, a continuous sample of the ordered L10 phase of Iron Platinum and a sample consisting of Iron Platinum nanoparticles embedded in a carbon matrix. The study of the remagnetisation reveals a general trend for all of the samples: The remagnetisation process can be described by two time dependences. A first exponential recovery that slows down with an increasing amount of energy absorbed in the system until an approximately linear time dependence is observed. This is followed by a second exponential recovery. In case of low fluence excitation, the first recovery is faster than the second. With increasing fluence the first recovery is slowed down and can be described as a linear function. If the pump-induced temperature increase in the sample is sufficiently high, a phase transition to a paramagnetic state is observed. In the remagnetisation process, the transition into the ferromagnetic state is characterised by a distinct transition between the linear and exponential recovery. From the combination of the transient lattice temperature Tp(t) obtained from ultrafast X-ray measurements and magnetisation M(t) gained from magneto-optical measurements we construct the transient magnetisation versus temperature relations M(Tp). If the lattice temperature remains below the Curie temperature the remagnetisation curve M(Tp) is linear and stays below the M(T) curve in equilibrium in the continuous transition metal layers. When the sample is heated above phase transition, the remagnetisation converges towards the static temperature dependence. For the granular Iron Platinum sample the M(Tp) curves for different fluences coincide, i.e. the remagnetisation follows a similar path irrespective of the initial laser-induced temperature jump.
Der Betrieb gewerblicher Art
(2019)
Die Arbeit untersucht die Grundlagen der Besteuerung der öffentlichen Hand, hier insbesondere die geschichtliche Entwicklung des Betriebs gewerblicher Art und die seit 2009 geltende Querverbundsystematik. Es wird die Entwicklung der einzelnen Tatbestände bis hin zur tatbestandsmäßigen Zusammenfassung einzelner Betriebe gewerblicher Art untersucht. Dabei stehen immer wieder die Wettbewerbssystematik und der steuerliche Gleichbehandlungsgrundsatz im Diskussionsmittelpunkt. Nachstehend schließt sich ein Vergleich zwischen dem horizontalen und vertikalen Querverbund an, der die grundlegenden Rechtsfolgen und die dauerdefizitären Betätigungen umfasst. Das Ergebnis zeigt auf, dass die öffentliche Hand mit ihrem wahlweisen horizontalen Querverbund und der fehlenden Gewinnerzielungsabsicht erhebliche Vorteile gegenüber privatrechtlich geführten Unternehmensformen genießt und somit erhebliches Steuersparpotential generiert.
Deutschland und Frankreich benötigen stetige Metallimporte, um ihr Wirtschaftsmodell aufrechtzuerhalten. Internationale Kooperation ist unerlässlich, damit diese Importe zuverlässig und nachhaltig verlaufen. Doch welche Potenziale bieten sich in diesem Bereich, welche Grenzen sind dabei zu erkennen? Dieser Frage geht Yann Wernert durch einen Fallstudienvergleich mit prozessanalytischen Methoden und auf der theoretischen Grundlage des neoliberalen Institutionalismus nach. Er zeigt, dass beide Länder ihre Bemühungen als reaktive Mittelmächte gestalten. Sie wollen durch staatliche Rohstoffstrategien wirtschaftliche, strategische und Nachhaltigkeitsziele erreichen. Während die Analyse durchaus Kooperationspotenziale ausmacht, fallen diese je nach Ländergruppe und Politikbereich sehr unterschiedlich aus.
The present dissertation investigates profit-maximizing behavior in different phases of the negotiation process. Over the last decades, research dealt in detail with behavior of negotiation actors with the aim of identifying performance enhancing factors. The majority of those studies focused on behavior within the main negotiation phase. This work, however, considers phases which are, so far, underrepresented in research but show an impact on the negotiation process and outcome. Those phases are the pre-negotiation, the first offer, and the main negotiation phase which is further divided by breaks into several rounds. Within these phases, traits of behavior are analyzed that can be used strategically in order to impact the negotiation outcome. The dissertation contains three papers, each one dealing with a specific strategy within one phase. The first paper investigates communication behavior in the pre-negotiation phase. Content analysis of a negotiation experiment shows that the employment of positive communication elements such as the generation of enthusiasm for an upcoming project results in an increase of agreements on entering a negotiation and also leads to a higher willingness to make concessions. The second paper explores the impact of a semantic first anchor, which does not contain a specific number but only gives a numerical direction, on the opponent’s concession behavior and the final outcome. By means of two scenario-based questionnaires and a negotiation experiment it is demonstrated that semantic offers reveal an anchoring effect and lead to better negotiation outcomes. The third paper deals with the introduction of breaks and their effect on the following negotiation process. Therefore, content and outcome of another negotiation experiment are investigated. The analysis shows that breaks evoke a dominant impression but can negatively impact the atmosphere and thereby also the outcome. Finally, the gathered insights are brought together and discussed. The dissertation closes with implications for practice, limitations of the work, and ideas for future research.
Berlin, Leipziger Straße 3-4
(2019)
In der Leipziger Straße 3–4 in Berlin, in der seit Herbst 2000 der Deutsche Bundesrat residiert, waren seit jeher bedeutende Institutionen angesiedelt.
1904 errichtet für das Preußische Herrenhaus, wurde das Gebäude nach dem Ersten Weltkrieg von den Arbeiter- und Soldatenräten genutzt. In der Weimarer Republik teilten sich der Preußische Staatsrat und das Preußische Wohlfahrtsministerium das Haus. Im Nationalsozialismus arbeiteten hier u. a. das Reichskirchenministerium und die Reichsstelle für Raumordnung.
Bartek Wardecki bietet eine vollständige Darstellung der Geschichte dieser berühmten Adresse sowie eine Übersicht über annähernd 1000 Veranstaltungen, die hier ausgerichtet wurden.
The growing energy demand of the modern economies leads to the increased consumption of fossil fuels in form of coal, oil, and natural gases, as the mains sources. The combustion of these carbon-based fossil fuels is inevitably producing greenhouse gases, especially CO2. Approaches to tackle the CO2 problem are to capture it from the combustion sources or directly from air, as well as to avoid CO2 production in energy consuming sources (e.g., in the refrigeration sector). In the former, relatively low CO2 concentrations and competitive adsorption of other gases is often leading to low CO2 capacities and selectivities. In both approaches, the interaction of gas molecules with porous materials plays a key role. Porous carbon materials possess unique properties including electric conductivity, tunable porosity, as well as thermal and chemical stability. Nevertheless, pristine carbon materials offer weak polarity and thus low CO2 affinity. This can be overcome by nitrogen doping, which enhances the affinity of carbon materials towards acidic or polar guest molecules (e.g., CO2, H2O, or NH3). In contrast to heteroatom-free materials, such carbon materials are in most cases “noble”, that is, they oxidize other matter rather than being oxidized due to the very positive working potential of their electrons. The challenging task here is to achieve homogenous distribution of significant nitrogen content with similar bonding motives throughout the carbon framework and a uniform pore size/distribution to maximize host-guest interactions. The aim of this thesis is the development of novel synthesis pathways towards nitrogen-doped nanoporous noble carbon materials with precise design on a molecular level and understanding of their structure-related performance in energy and environmental applications, namely gas adsorption and electrochemical energy storage.
A template-free synthesis approach towards nitrogen-doped noble microporous carbon materials with high pyrazinic nitrogen content and C2N-type stoichiometry was established via thermal condensation of a hexaazatriphenylene derivative. The materials exhibited high uptake of guest molecules, such as H2O and CO2 at low concentrations, as well as moderate CO2/N2 selectivities. In the following step, the CO2/N2 selectivity was enhanced towards molecular sieving of CO2 via kinetic size exclusion of N2. The precise control over the condensation degree, and thus, atomic construction and porosity of the resulting materials led to remarkable CO2/N2 selectivities, CO2 capacities, and heat of CO2 adsorption. The ultrahydrophilic nature of the pore walls and the narrow microporosity of these carbon materials served as ideal basis for the investigation of interface effects with more polar guest molecules than CO2, namely H2O and NH3.
H2O vapor physisorption measurements, as well as NH3-temperature programmed desorption and thermal response measurements showed exceptionally high affinity towards H2O vapor and NH3 gas. Another series of nitrogen-doped carbon materials was synthesized by direct condensation of a pyrazine-fused conjugated microporous polymer and their structure-related performance in electrochemical energy storage, namely as anode materials for sodium-ion battery, was investigated.
All in all, the findings in this thesis exemplify the value of molecularly designed nitrogen-doped carbon materials with remarkable heteroatom content implemented as well-defined structure motives. The simultaneous adjustment of the porosity renders these materials suitable candidates for fundamental studies about the interactions between nitrogen-doped carbon materials and different guest species.
Hepcidin-25 (Hep-25) plays a crucial role in the control of iron homeostasis. Since the dysfunction of the hepcidin pathway leads to multiple diseases as a result of iron imbalance, hepcidin represents a potential target for the diagnosis and treatment of disorders of iron metabolism. Despite intense research in the last decade targeted at developing a selective immunoassay for iron disorder diagnosis and treatment and better understanding the ferroportin-hepcidin interaction, questions remain. The key to resolving these underlying questions is acquiring exact knowledge of the 3D structure of native Hep-25. Since it was determined that the N-terminus, which is responsible for the bioactivity of Hep-25, contains a small Cu(II)-binding site known as the ATCUN motif, it was assumed that the Hep-25-Cu(II) complex is the native, bioactive form of the hepcidin. This structure has thus far not been elucidated in detail. Owing to the lack of structural information on metal-bound Hep-25, little is known about its possible biological role in iron metabolism. Therefore, this work is focused on structurally characterizing the metal-bound Hep-25 by NMR spectroscopy and molecular dynamics simulations. For the present work, a protocol was developed to prepare and purify properly folded Hep-25 in high quantities. In order to overcome the low solubility of Hep-25 at neutral pH, we introduced the C-terminal DEDEDE solubility tag. The metal binding was investigated through a series of NMR spectroscopic experiments to identify the most affected amino acids that mediate metal coordination. Based on the obtained NMR data, a structural calculation was performed in order to generate a model structure of the Hep-25-Ni(II) complex. The DEDEDE tag was excluded from the structural calculation due to a lack of NMR restraints. The dynamic nature and fast exchange of some of the amide protons with solvent reduced the overall number of NMR restraints needed for a high-quality structure. The NMR data revealed that the 20 Cterminal Hep-25 amino acids experienced no significant conformational changes, compared to published results, as a result of a pH change from pH 3 to pH 7 and metal binding. A 3D model of the Hep-25-Ni(II) complex was constructed from NMR data recorded for the hexapeptideNi(II) complex and Hep-25-DEDEDE-Ni(II) complex in combination with the fixed conformation of 19 C-terminal amino acids. The NMR data of the Hep-25-DEDEDE-Ni(II) complex indicates that the ATCUN motif moves independently from the rest of the structure. The 3D model structure of the metal-bound Hep-25 allows for future works to elucidate hepcidin’s interaction with its receptor ferroportin and should serve as a starting point for the development of antibodies with improved selectivity.
Seit 2003 hat sich das politische Bild des Irak stark verändert. Dadurch begann der Prozess der Neugestaltung der irakischen Rechtsordnung. Die irakische Verfassung von 2005 legt erstmalig in der Geschichte des Irak den Islam und die Demokratie als zwei nebeneinander zu beachtende Grundprinzipien bei der Gesetzgebung fest. Trotz dieser signifikanten Veränderung im irakischen Rechtssystem und erheblicher Entwicklungen im internationalen Privat- und Zivilverfahrensrecht (IPR/IZVR) im internationalen Vergleich gilt die hauptsächlich im irakischen Zivilgesetzbuch (ZGB) von 1951 enthaltene gesetzliche Regelung des IPR/IZVR im Irak weiterhin. Deshalb entstand diese Arbeit für eine Reformierung des irakischen IPR/IZVR.
Die Arbeit gilt als erste umfassende wissenschaftliche Untersuchung, die sich mit dem jetzigen Inhalt und der zukünftigen Reformierung des irakischen internationalen Privatrecht- und Zivilverfahrensrechts (IPR/IZVR) beschäftigt.
Die Verfasserin vermittelt einen Gesamtüberblick über das jetzt geltende irakische internationale Privat- und Zivilverfahrensrecht mit gelegentlicher punktueller und stichwortartiger Heranziehung des deutschen, islamischen, türkischen und tunesischen Rechts, zeigt dessen Schwachstellen auf und unterbreitet entsprechende Reformvorschläge.
Wegen der besonderen Bedeutung des internationalen Vertragsrechts für die Wirtschaft im Irak und auch zum Teil für Deutschland gibt die Verfasserin einen genaueren Überblick über das irakische internationale Vertragsrecht und bekräftigt gleichzeitig dessen Reformbedürftigkeit.
Die Darstellung der wichtigen Entwicklungen im deutsch-europäischen, im traditionellen islamischen Recht und im türkischen und tunesischen internationalen Privat- und Zivilverfahrensrecht im zweiten Kapitel dienen als Grundlage, auf die bei der Reformierung des irakischen IPR/ IZVR zurück gegriffen werden kann. Da die Kenntnisse des islamischen Rechts nicht zwingend zum Rechtsstudium gehören, wird das islamische Recht dazu in Bezug auf seine Entstehung und die Rechtsquellen dargestellt.
Am Ende der Arbeit wird ein Entwurf eines föderalen Gesetzes zum internationalen Privatrecht im Irak katalogisiert, der sich im Rahmen der irakischen Verfassung gleichzeitig mit dem Islam und der Demokratie vereinbaren lässt.
Die deutschen Wirtschaftsverbände geraten zunehmend unter Konkurrenzdruck. Immer mehr Verbände werben um dieselbe Mitgliederklientel und haben einen ähnlichen Themenzuschnitt. Darüber hinaus betreiben immer mehr Mitgliedsunternehmen eigene politische Interessenvertretung. Die vorliegende Studie untersucht auf der Grundlage des aus der Evolutionsbiologie stammenden Population Ecology-Ansatzes, wie die Verbände mit dieser Konkurrenz umgehen.
In light of the debate on the consequences of competitive contracting out of traditionally public services, this research compares two mechanisms used to allocate funds in development cooperation—direct awarding and competitive contracting out—aiming to identify their potential advantages and disadvantages.
The agency theory is applied within the framework of rational-choice institutionalism to study the institutional arrangements that surround two different money allocation mechanisms, identify the incentives they create for the behavior of individual actors in the field, and examine how these then transfer into measurable differences in managerial quality of development aid projects. In this work, project management quality is seen as an important determinant of the overall project success.
For data-gathering purposes, the German development agency, the Gesellschaft für Internationale Zusammenarbeit (GIZ), is used due to its unique way of work. Whereas the majority of projects receive funds via direct-award mechanism, there is a commercial department, GIZ International Services (GIZ IS) that has to compete for project funds.
The data concerning project management practices on the GIZ and GIZ IS projects was gathered via a web-based, self-administered survey of project team leaders. Principal component analysis was applied to reduce the dimensionality of the independent variable to total of five components of project management. Furthermore, multiple regression analysis identified the differences between the separate components on these two project types. Enriched by qualitative data gathered via interviews, this thesis offers insights into everyday managerial practices in development cooperation and identifies the advantages and disadvantages of the two allocation mechanisms.
The thesis first reiterates the responsibility of donors and implementers for overall aid effectiveness. It shows that the mechanism of competitive contracting out leads to better oversight and control of implementers, fosters deeper cooperation between the implementers and beneficiaries, and has a potential to strengthen ownership of recipient countries. On the other hand, it shows that the evaluation quality does not tremendously benefit from the competitive allocation mechanism and that the quality of the component knowledge management and learning is better when direct-award mechanisms are used. This raises questions about the lacking possibilities of actors in the field to learn about past mistakes and incorporate the finings into the future interventions, which is one of the fundamental issues of aid effectiveness. Finally, the findings show immense deficiencies in regard to oversight and control of individual projects in German development cooperation.
The Himalayas are a region that is most dependent, but also frequently prone to hazards from changing meltwater resources. This mountain belt hosts the highest mountain peaks on earth, has the largest reserve of ice outside the polar regions, and is home to a rapidly growing population in recent decades. One source of hazard has attracted scientific research in particular in the past two decades: glacial lake outburst floods (GLOFs) occurred rarely, but mostly with fatal and catastrophic consequences for downstream communities and infrastructure. Such GLOFs can suddenly release several million cubic meters of water from naturally impounded meltwater lakes. Glacial lakes have grown in number and size by ongoing glacial mass losses in the Himalayas. Theory holds that enhanced meltwater production may increase GLOF frequency, but has never been tested so far. The key challenge to test this notion are the high altitudes of >4000 m, at which lakes occur, making field work impractical. Moreover, flood waves can attenuate rapidly in mountain channels downstream, so that many GLOFs have likely gone unnoticed in past decades. Our knowledge on GLOFs is hence likely biased towards larger, destructive cases, which challenges a detailed quantification of their frequency and their response to atmospheric warming. Robustly quantifying the magnitude and frequency of GLOFs is essential for risk assessment and management along mountain rivers, not least to implement their return periods in building design codes.
Motivated by this limited knowledge of GLOF frequency and hazard, I developed an algorithm that efficiently detects GLOFs from satellite images. In essence, this algorithm classifies land cover in 30 years (~1988–2017) of continuously recorded Landsat images over the Himalayas, and calculates likelihoods for rapidly shrinking water bodies in the stack of land cover images. I visually assessed such detected tell-tale sites for sediment fans in the river channel downstream, a second key diagnostic of GLOFs. Rigorous tests and validation with known cases from roughly 10% of the Himalayas suggested that this algorithm is robust against frequent image noise, and hence capable to identify previously unknown GLOFs. Extending the search radius to the entire Himalayan mountain range revealed some 22 newly detected GLOFs. I thus more than doubled the existing GLOF count from 16 previously known cases since 1988, and found a dominant cluster of GLOFs in the Central and Eastern Himalayas (Bhutan and Eastern Nepal), compared to the rarer affected ranges in the North. Yet, the total of 38 GLOFs showed no change in the annual frequency, so that the activity of GLOFs per unit glacial lake area has decreased in the past 30 years. I discussed possible drivers for this finding, but left a further attribution to distinct GLOF-triggering mechanisms open to future research.
This updated GLOF frequency was the key input for assessing GLOF hazard for the entire Himalayan mountain belt and several subregions. I used standard definitions in flood hydrology, describing hazard as the annual exceedance probability of a given flood peak discharge [m3 s-1] or larger at the breach location. I coupled the empirical frequency of GLOFs per region to simulations of physically plausible peak discharges from all existing ~5,000 lakes in the Himalayas. Using an extreme-value model, I could hence calculate flood return periods. I found that the contemporary 100-year GLOF discharge (the flood level that is reached or exceeded on average once in 100 years) is 20,600+2,200/–2,300 m3 s-1 for the entire Himalayas. Given the spatial and temporal distribution of historic GLOFs, contemporary GLOF hazard is highest in the Eastern Himalayas, and lower for regions with rarer GLOF abundance. I also calculated GLOF hazard for some 9,500 overdeepenings, which could expose and fill with water, if all Himalayan glaciers have melted eventually. Assuming that the current GLOF rate remains unchanged, the 100-year GLOF discharge could double (41,700+5,500/–4,700 m3 s-1), while the regional GLOF hazard may increase largest in the Karakoram.
To conclude, these three stages–from GLOF detection, to analysing their frequency and estimating regional GLOF hazard–provide a framework for modern GLOF hazard assessment. Given the rapidly growing population, infrastructure, and hydropower projects in the Himalayas, this thesis assists in quantifying the purely climate-driven contribution to hazard and risk from GLOFs.
The individual’s mental lexicon comprises all known words as well related infor-mation on semantics, orthography and phonology. Moreover, entries connect due to simi-larities in these language domains building a large network structure. The access to lexical information is crucial for processing of words and sentences. Thus, a lack of information in-hibits the retrieval and can cause language processing difficulties. Hence, the composition of the mental lexicon is essential for language skills and its assessment is a central topic of lin-guistic and educational research.
In early childhood, measurement of the mental lexicon is uncomplicated, for example through parental questionnaires or the analysis of speech samples. However, with growing content the measurement becomes more challenging: With more and more words in the mental lexicon, the inclusion of all possible known words into a test or questionnaire be-comes impossible. That is why there is a lack of methods to assess the mental lexicon for school children and adults. For the same reason, there are only few findings on the courses of lexical development during school years as well as its specific effect on other language skills. This dissertation is supposed to close this gap by pursuing two major goals: First, I wanted to develop a method to assess lexical features, namely lexicon size and lexical struc-ture, for children of different age groups. Second, I aimed to describe the results of this method in terms of lexical development of size and structure. Findings were intended to help understanding mechanisms of lexical acquisition and inform theories on vocabulary growth.
The approach is based on the dictionary method where a sample of words out of a dictionary is tested and results are projected on the whole dictionary to determine an indi-vidual’s lexicon size. In the present study, the childLex corpus, a written language corpus for children in German, served as the basis for lexicon size estimation. The corpus is assumed to comprise all words children attending primary school could know. Testing a sample of words out of the corpus enables projection of the results on the whole corpus. For this purpose, a vocabulary test based on the corpus was developed. Afterwards, test performance of virtual participants was simulated by drawing different lexicon sizes from the corpus and comparing whether the test items were included in the lexicon or not. This allowed determination of the relation between test performance and total lexicon size and thus could be transferred to a sample of real participants. Besides lexicon size, lexical content could be approximated with this approach and analyzed in terms of lexical structure.
To pursue the presented aims and establish the sampling method, I conducted three consecutive studies. Study 1 includes the development of a vocabulary test based on the childLex corpus. The testing was based on the yes/no format and included three versions for different age groups. The validation grounded on the Rasch Model shows that it is a valid instrument to measure vocabulary for primary school children in German. In Study 2, I estab-lished the method to estimate lexicon sizes and present results on lexical development dur-ing primary school. Plausible results demonstrate that lexical growth follows a quadratic function starting with about 6,000 words at the beginning of school and about 73,000 words on average for young adults. Moreover, the study revealed large interindividual differences. Study 3 focused on the analysis of network structures and their development in the mental lexicon due to orthographic similarities. It demonstrates that networks possess small-word characteristics and decrease in interconnectivity with age.
Taken together, this dissertation provides an innovative approach for the assessment and description of the development of the mental lexicon from primary school onwards. The studies determine recent results on lexical acquisition in different age groups that were miss-ing before. They impressively show the importance of this period and display the existence of extensive interindividual differences in lexical development. One central aim of future research needs to address the causes and prevention of these differences. In addition, the application of the method for further research (e.g. the adaptation for other target groups) and teaching purposes (e.g. adaptation of texts for different target groups) appears to be promising.
Determining the relationship between genotype and phenotype is the key to understand the plasticity and robustness of phenotypes in nature. While the directly observable plant phenotypes (e.g. agronomic, yield and stress resistance traits) have been well-investigated, there is still a lack in our knowledge about the genetic basis of intermediate phenotypes, such as metabolic phenotypes. Dissecting the links between genotype and phenotype depends on suitable statistical models. The state-of-the-art models are developed for directly observable phenotypes, regardless the characteristics of intermediate phenotypes. This thesis aims to fill the gaps in understanding genetic architecture of intermediate phenotypes, and how they tie to composite traits, namely plant growth. The metabolite levels and reaction fluxes, as two aspects of metabolic phenotypes, are shaped by the interrelated chemical reactions formed in genome-scale metabolic network. Here, I attempt to answer the question: Can the knowledge of underlying genome-scale metabolic network improve the model performance for prediction of metabolic phenotypes and associated plant growth? To this end, two projects are investigated in this thesis. Firstly, we propose an approach that couples genomic selection with genome-scale metabolic network and metabolic profiles in Arabidopsis thaliana to predict growth. This project is the first integration of genomic data with fluxes predicted based on constraint-based modeling framework and data on biomass composition. We demonstrate that our approach leads to a considerable increase of prediction accuracy in comparison to the state-of-the-art methods in both within and across environment predictions. Therefore, our work paves the way for combining knowledge on metabolic mechanisms in the statistical approach underlying genomic selection to increase the efficiency of future plant breeding approaches. Secondly, we investigate how reliable is genomic selection for metabolite levels, and which single nucleotide polymorphisms (SNPs), obtained from different neighborhoods of a given metabolic network, contribute most to the accuracy of prediction. The results show that the local structure of first and second neighborhoods are not sufficient for predicting the genetic basis of metabolite levels in Zea mays. Furthermore, we find that the enzymatic SNPs can capture most the genetic variance and the contribution of non-enzymatic SNPs is in fact small. To comprehensively understand the genetic architecture of metabolic phenotypes, I extend my study to a local Arabidopsis thaliana population and their hybrids. We analyze the genetic architecture in primary and secondary metabolism as well as in growth. In comparison to primary metabolites, compounds from secondary metabolism were more variable and show more non-additive inheritance patterns which could be attributed to epistasis. Therefore, our study demonstrates that heterozygosity in local Arabidopsis thaliana population generates metabolic variation and may impact several tasks directly linked to metabolism. The studies in this thesis improve the knowledge of genetic architecture of metabolic phenotypes in both inbreed and hybrid population. The approaches I proposed to integrate genome-scale metabolic network with genomic data provide the opportunity to obtain mechanistic insights about the determinants of agronomically important polygenic traits.
The usage of mobile devices is rapidly growing with Android being the most prevalent mobile operating system. Thanks to the vast variety of mobile applications, users are preferring smartphones over desktops for day to day tasks like Internet surfing. Consequently, smartphones store a plenitude of sensitive data. This data together with the high values of smartphones make them an attractive target for device/data theft (thieves/malicious applications).
Unfortunately, state-of-the-art anti-theft solutions do not work if they do not have an active network connection, e.g., if the SIM card was removed from the device. In the majority of these cases, device owners permanently lose their smartphone together with their personal data, which is even worse.
Apart from that malevolent applications perform malicious activities to steal sensitive information from smartphones. Recent research considered static program analysis to detect dangerous data leaks. These analyses work well for data leaks due to inter-component communication, but suffer from shortcomings for inter-app communication with respect to precision, soundness, and scalability.
This thesis focuses on enhancing users' privacy on Android against physical device loss/theft and (un)intentional data leaks. It presents three novel frameworks: (1) ThiefTrap, an anti-theft framework for Android, (2) IIFA, a modular inter-app intent information flow analysis of Android applications, and (3) PIAnalyzer, a precise approach for PendingIntent vulnerability analysis.
ThiefTrap is based on a novel concept of an anti-theft honeypot account that protects the owner's data while preventing a thief from resetting the device.
We implemented the proposed scheme and evaluated it through an empirical user study with 35 participants. In this study, the owner's data could be protected, recovered, and anti-theft functionality could be performed unnoticed from the thief in all cases.
IIFA proposes a novel approach for Android's inter-component/inter-app communication (ICC/IAC) analysis. Our main contribution is the first fully automatic, sound, and precise ICC/IAC information flow analysis that is scalable for realistic apps due to modularity, avoiding combinatorial explosion: Our approach determines communicating apps using short summaries rather than inlining intent calls between components and apps, which requires simultaneously analyzing all apps installed on a device.
We evaluate IIFA in terms of precision, recall, and demonstrate its scalability to a large corpus of real-world apps. IIFA reports 62 problematic ICC-/IAC-related information flows via two or more apps/components.
PIAnalyzer proposes a novel approach to analyze PendingIntent related vulnerabilities. PendingIntents are a powerful and universal feature of Android for inter-component communication. We empirically evaluate PIAnalyzer on a set of 1000 randomly selected applications and find 1358 insecure usages of PendingIntents, including 70 severe vulnerabilities.
Bei der Arbeit mit literarischen Texten spielen Kontexte für das Verstehen naturgemäß eine herausgehobene Rolle. Lehrerinnen und Lehrer sind dabei mit vielfältigen Problemen konfrontiert: Welche Kontexte sind in welchen Jahrgangsstufen sinnvoll und ergiebig? Wann überfrachtet die Anreicherung mit Kontexten einen Verstehensprozess, wann ist sie unumgänglich? Wie gelingt es, dass Lernende Kontexte nicht nur schematisch, sondern flexibel für das Verstehen einsetzen? Wie können die Forderungen der Bildungsstandards und Lehrpläne nach einer intensiven Kontextualisierung im Unterricht konkret umgesetzt werden? Der vorliegende Band gibt auf diese Fragen anwendungsorientierte Antworten. Dies geschieht auf drei Ebenen: Zum einen wird über einen analytischen Zugang der Kontextbegriff systematisiert (mit den Kontextbereichen Gattung, Literaturgeschichte, Autorbiografie und Intertextualität), zum anderen wird in einer empirischen Studie die Wirksamkeit reflektierter Kontextnutzung für das Textverstehen verdeutlicht. Drittens werden erprobte Modelle für den konkreten Einsatz im Unterricht vorgestellt und diskutiert. So können Kontexte als ein ergiebiges Werkzeug für den Unterricht bereitgestellt werden.
Additive Manufacturing (AM) in terms of laser powder-bed fusion (L-PBF) offers new prospects regarding the design of parts and enables therefore the production of lattice structures. These lattice structures shall be implemented in various industrial applications (e.g. gas turbines) for reasons of material savings or cooling channels. However, internal defects, residual stress, and structural deviations from the nominal geometry are unavoidable.
In this work, the structural integrity of lattice structures manufactured by means of L-PBF was non-destructively investigated on a multiscale approach.
A workflow for quantitative 3D powder analysis in terms of particle size, particle shape, particle porosity, inter-particle distance and packing density was established. Synchrotron computed tomography (CT) was used to correlate the packing density with the particle size and particle shape. It was also observed that at least about 50% of the powder porosity was released during production of the struts.
Struts are the component of lattice structures and were investigated by means of laboratory CT. The focus was on the influence of the build angle on part porosity and surface quality. The surface topography analysis was advanced by the quantitative characterisation of re-entrant surface features. This characterisation was compared with conventional surface parameters showing their complementary information, but also the need for AM specific surface parameters.
The mechanical behaviour of the lattice structure was investigated with in-situ CT under compression and successive digital volume correlation (DVC). The deformation was found to be knot-dominated, and therefore the lattice folds unit cell layer wise.
The residual stress was determined experimentally for the first time in such lattice structures. Neutron diffraction was used for the non-destructive 3D stress investigation. The principal stress directions and values were determined in dependence of the number of measured directions. While a significant uni-axial stress state was found in the strut, a more hydrostatic stress state was found in the knot. In both cases, strut and knot, seven directions were at least needed to find reliable principal stress directions.
Supermassive black holes reside in the hearts of almost all massive galaxies. Their evolutionary path seems to be strongly linked to the evolution of their host galaxies, as implied by several empirical relations between the black hole mass (M BH ) and different host galaxy properties. The physical driver of this co-evolution is, however, still not understood. More mass measurements over homogeneous samples and a detailed understanding of systematic uncertainties are required to fathom the origin of the scaling relations.
In this thesis, I present the mass estimations of supermassive black holes in the nuclei of one late-type and thirteen early-type galaxies. Our SMASHING sample extends from the intermediate to the massive galaxy mass regime and was selected to fill in gaps in number of galaxies along the scaling relations. All galaxies were observed at high spatial resolution, making use of the adaptive-optics mode of integral field unit (IFU) instruments on state-of-the-art telescopes (SINFONI, NIFS, MUSE). I extracted the stellar kinematics from these observations and constructed dynamical Jeans and Schwarzschild models to estimate the mass of the central black holes robustly. My new mass estimates increase the number of early-type galaxies with measured black hole masses by 15%. The seven measured galaxies with nuclear light deficits (’cores’) augment the sample of cored galaxies with measured black holes by 40%. Next to determining massive black hole masses, evaluating the accuracy of black hole masses is crucial for understanding the intrinsic scatter of the black hole- host galaxy scaling relations. I tested various sources of systematic uncertainty on my derived mass estimates.
The M BH estimate of the single late-type galaxy of the sample yielded an upper limit, which I could constrain very robustly. I tested the effects of dust, mass-to-light ratio (M/L) variation, and dark matter on my measured M BH . Based on these tests, the typically assumed constant M/L ratio can be an adequate assumption to account for the small amounts of dark matter in the center of that galaxy. I also tested the effect of a variable M/L variation on the M BH measurement on a second galaxy. By considering stellar M/L variations in the dynamical modeling, the measured M BH decreased by 30%. In the future, this test should be performed on additional galaxies to learn how an as constant assumed M/L flaws the estimated black hole masses.
Based on our upper limit mass measurement, I confirm previous suggestions that resolving the predicted BH sphere-of-influence is not a strict condition to measure black hole masses. Instead, it is only a rough guide for the detection of the black hole if high-quality, and high signal-to-noise IFU data are used for the measurement. About half of our sample consists of massive early-type galaxies which show nuclear surface brightness cores and signs of triaxiality. While these types of galaxies are typically modeled with axisymmetric modeling methods, the effects on M BH are not well studied yet. The massive galaxies of our presented galaxy sample are well suited to test the effect of different stellar dynamical models on the measured black hole mass in evidently triaxial galaxies. I have compared spherical Jeans and axisymmetric Schwarzschild models and will add triaxial Schwarzschild models to this comparison in the future. The constructed Jeans and Schwarzschild models mostly disagree with each other and cannot reproduce many of the triaxial features of the galaxies (e.g., nuclear sub-components, prolate rotation). The consequence of the axisymmetric-triaxial assumption on the accuracy of M BH and its impact on the black hole - host galaxy relation needs to be carefully examined in the future.
In the sample of galaxies with published M BH , we find measurements based on different dynamical tracers, requiring different observations, assumptions, and methods. Crucially, different tracers do not always give consistent results. I have used two independent tracers (cold molecular gas and stars) to estimate M BH in a regular galaxy of our sample. While the two estimates are consistent within their errors, the stellar-based measurement is twice as high as the gas-based. Similar trends have also been found in the literature. Therefore, a rigorous test of the systematics associated with the different modeling methods is required in the future. I caution to take the effects of different tracers (and methods) into account when discussing the scaling relations.
I conclude this thesis by comparing my galaxy sample with the compilation of galaxies with measured black holes from the literature, also adding six SMASHING galaxies, which were published outside of this thesis. None of the SMASHING galaxies deviates significantly from the literature measurements. Their inclusion to the published early-type galaxies causes a change towards a shallower slope for the M BH - effective velocity dispersion relation, which is mainly driven by the massive galaxies of our sample. More unbiased and homogenous measurements are needed in the future to determine the shape of the relation and understand its physical origin.
Predators can have numerical and behavioral effects on prey animals. While numerical effects are well explored, the impact of behavioral effects is unclear. Furthermore, behavioral effects are generally either analyzed with a focus on single individuals or with a focus on consequences for other trophic levels. Thereby, the impact of fear on the level of prey communities is overlooked, despite potential consequences for conservation and nature management. In order to improve our understanding of predator-prey interactions, an assessment of the consequences of fear in shaping prey community structures is crucial.
In this thesis, I evaluated how fear alters prey space use, community structure and composition, focusing on terrestrial mammals. By integrating landscapes of fear in an existing individual-based and spatially-explicit model, I simulated community assembly of prey animals via individual home range formation. The model comprises multiple hierarchical levels from individual home range behavior to patterns of prey community structure and composition. The mechanistic approach of the model allowed for the identification of underlying mechanism driving prey community responses under fear.
My results show that fear modified prey space use and community patterns. Under fear, prey animals shifted their home ranges towards safer areas of the landscape. Furthermore, fear decreased the total biomass and the diversity of the prey community and reinforced shifts in community composition towards smaller animals. These effects could be mediated by an increasing availability of refuges in the landscape. Under landscape changes, such as habitat loss and fragmentation, fear intensified negative effects on prey communities. Prey communities in risky environments were subject to a non-proportional diversity loss of up to 30% if fear was taken into account. Regarding habitat properties, I found that well-connected, large safe patches can reduce the negative consequences of habitat loss and fragmentation on prey communities. Including variation in risk perception between prey animals had consequences on prey space use. Animals with a high risk perception predominantly used safe areas of the landscape, while animals with a low risk perception preferred areas with a high food availability. On the community level, prey diversity was higher in heterogeneous landscapes of fear if individuals varied in their risk perception compared to scenarios in which all individuals had the same risk perception.
Overall, my findings give a first, comprehensive assessment of the role of fear in shaping prey communities. The linkage between individual home range behavior and patterns at the community level allows for a mechanistic understanding of the underlying processes. My results underline the importance of the structure of the landscape of fear as a key driver of prey community responses, especially if the habitat is threatened by landscape changes. Furthermore, I show that individual landscapes of fear can improve our understanding of the consequences of trait variation on community structures. Regarding conservation and nature management, my results support calls for modern conservation approaches that go beyond single species and address the protection of biotic interactions.
This thesis investigates whether multilingual speakers’ use of grammatical constraints in an additional language (La) is affected by the native (L1) and non-native grammars (L2) of their linguistic repertoire.
Previous studies have used untimed measures of grammatical performance to show that L1 and L2 grammars affect the initial stages of La acquisition. This thesis extends this work by examining whether speakers at intermediate levels of La proficiency, who demonstrate mature untimed/offline knowledge of the target La constraints, are differentially affected by their L1 and L2 knowledge when they comprehend sentences under processing pressure. With this purpose, several groups of La German speakers were tested on word order and agreement phenomena using online/timed measures of grammatical knowledge. Participants had mirror distributions of their prior languages and they were either L1English/L2Spanish speakers or L1Spanish/L2English speakers. Crucially, in half of the phenomena the target La constraint aligned with English but not with Spanish, while in the other half it aligned with Spanish but not with English. Results show that the L1 grammar plays a major role in the use of La constraints under processing pressure, as participants displayed increased sensitivity to La constraints when they aligned with their L1, and reduced sensitivity when they did not. Further, in specific phenomena in which the L2 and La constraints aligned, increased L2 proficiency resulted in an enhanced sensitivity to the La constraint. These findings suggest that both native and non-native grammars affect how speakers use La grammatical constraints under processing pressure. However, L1 and L2 grammars differentially influence on participants’ performance: While L1 constraints seem to be reliably recruited to cope with the processing demands of real-time La use, proficiency in an L2 can enhance sensitivity to La constraints only in specific circumstances, namely when L2 and La constraints align.
Dieses Buch befasst sich mit der Anteilsübertragung von Kommanditanteilen, die von der Rechtsprechung zwar längst anerkannt ist, jedoch vom Gesetzgeber bislang nicht geregelt wurde. Bei der Eintragung einer solchen Anteilsübertragung in das Handelsregister unterlaufen in der Praxis häufig Fehler, deren jeweilige haftungsrechtliche Konsequenz die Autorin eingehend untersucht. Im Zentrum der Arbeit steht die These, dass die Nichteintragung des Sonderrechtsnachfolgevermerkes zu keiner doppelten Haftung von Neu- und Altkommanditist führt.
Giuseppe Prezzolini
(2019)
Der Journalist Giuseppe Prezzolini (1882–1982) gehört zu den prägenden italienischen Intellektuellen des 20. Jahrhunderts. Die von ihm begründete Kulturzeitschrift »La Voce« bot einflussreichen Stimmen der Zeit eine Bühne, darunter Giovanni Gentile, Benedetto Croce oder Benito Mussolini. Durch seine publizistische Arbeit avancierte er zu einem festen intellektuellen Bezugspunkt konservativer Kreise Italiens. Seine Forderungen u. a. nach einer Neugründung des italienischen Konservatismus abseits neofaschistischer Ideen begründeten seinen umstrittenen Ruf als Antikonformist.
On a planetary scale human populations need to adapt to both socio-economic and environmental problems amidst rapid global change. This holds true for coupled human-environment (socio-ecological) systems in rural and urban settings alike. Two examples are drylands and urban coasts. Such socio-ecological systems have a global distribution. Therefore, advancing the knowledge base for identifying socio-ecological adaptation needs with local vulnerability assessments alone is infeasible: The systems cover vast areas, while funding, time, and human resources for local assessments are limited. They are lacking in low an middle-income countries (LICs and MICs) in particular.
But places in a specific socio-ecological system are not only unique and complex – they also exhibit similarities. A global patchwork of local rural drylands vulnerability assessments of human populations to socio-ecological and environmental problems has already been reduced to a limited number of problem structures, which typically cause vulnerability. However, the question arises whether this is also possible in urban socio-ecological systems. The question also arises whether these typologies provide added value in research beyond global change. Finally, the methodology employed for drylands needs refining and standardizing to increase its uptake in the scientific community. In this dissertation, I set out to fill these three gaps in research.
The geographical focus in my dissertation is on LICs and MICs, which generally have lower capacities to adapt, and greater adaptation needs, regarding rapid global change. Using a spatially explicit indicator-based methodology, I combine geospatial and clustering methods to identify typical configurations of key factors in case studies causing vulnerability to human populations in two specific socio-ecological systems. Then I use statistical and analytical methods to interpret and appraise both the typical configurations and the global typologies they constitute.
First, I improve the indicator-based methodology and then reanalyze typical global problem structures of socio-ecological drylands vulnerability with seven indicator datasets. The reanalysis confirms the key tenets and produces a more realistic and nuanced typology of eight spatially explicit problem structures, or vulnerability profiles: Two new profiles with typically high natural resource endowment emerge, in which overpopulation has led to medium or high soil erosion. Second, I determine whether the new drylands typology and its socio-ecological vulnerability concept advance a thematically linked scientific debate in human security studies: what drives violent conflict in drylands? The typology is a much better predictor for conflict distribution and incidence in drylands than regression models typically used in peace research. Third, I analyze global problem structures typically causing vulnerability in an urban socio-ecological system - the rapidly urbanizing coastal fringe (RUCF) – with eleven indicator datasets. The RUCF also shows a robust typology, and its seven profiles show huge asymmetries in vulnerability and adaptive capacity. The fastest population increase, lowest income, most ineffective governments, most prevalent poverty, and lowest adaptive capacity are all typically stacked in two profiles in LICs. This shows that beyond local case studies tropical cyclones and/or coastal flooding are neither stalling rapid population growth, nor urban expansion, in the RUCF. I propose entry points for scaling up successful vulnerability reduction strategies in coastal cities within the same vulnerability profile.
This dissertation shows that patchworks of local vulnerability assessments can be generalized to structure global socio-ecological vulnerabilities in both rural and urban socio-ecological systems according to typical problems. In terms of climate-related extreme events in the RUCF, conflicting problem structures and means to deal with them are threatening to widen the development gap between LICs and high-income countries unless successful vulnerability reduction measures are comprehensively scaled up. The explanatory power for human security in drylands warrants further applications of the methodology beyond global environmental change research in the future. Thus, analyzing spatially explicit global typologies of socio-ecological vulnerability is a useful complement to local assessments: The typologies provide entry points for where to consider which generic measures to reduce typical problem structures – including the countless places without local assessments. This can save limited time and financial resources for adaptation under rapid global change.
This dissertation is concerned with the relation between qualitative phonological organization in the form of syllabic structure and continuous phonetics, that is, the spatial and temporal dimensions of vocal tract action that express syllabic structure. The main claim of the dissertation is twofold. First, we argue that syllabic organization exerts multiple effects on the spatio-temporal properties of the segments that partake in that organization. That is, there is no unique or privileged exponent of syllabic organization. Rather, syllabic organization is expressed in a pleiotropy of phonetic indices. Second, we claim that a better understanding of the relation between qualitative phonological organization and continuous phonetics is reached when one considers how the string of segments (over which the nature of the phonological organization is assessed) responds to perturbations (scaling of phonetic variables) of localized properties (such as durations) within that string. Specifically, variation in phonetic variables and more specifically prosodic variation is a crucial key to understanding the nature of the link between (phonological) syllabic organization and the phonetic spatio-temporal manifestation of that organization. The effects of prosodic variation on segmental properties and on the overlap between the segments, we argue, offer the right pathway to discover patterns related to syllabic organization. In our approach, to uncover evidence for global organization, the sequence of segments partaking in that organization as well as properties of these segments or their relations with one another must be somehow locally varied. The consequences of such variation on the rest of the sequence can then be used to unveil the span of organization. When local perturbations to segments or relations between adjacent segments have effects that ripple through the rest of the sequence, this is evidence that organization is global. If instead local perturbations stay local with no consequences for the rest of the whole, this indicates that organization is local.
In this work we investigated ultrafast demagnetization in a Heusler-alloy. This material belongs to the halfmetal and exists in a ferromagnetic phase. A special feature of investigated alloy is a structure of electronic bands. The last leads to the specific density of the states. Majority electrons form a metallic like structure while minority electrons form a gap near the Fermi-level, like in semiconductor. This particularity offers a good possibility to use this material as model-like structure and to make some proof of principles concerning demagnetization. Using pump-probe experiments we carried out time-resolved measurements to figure out the times of demagnetization. For the pumping we used ultrashort laser pulses with duration around 100 fs. Simultaneously we used two excitation regimes with two different wavelengths namely 400 nm and 1240 nm. Decreasing the energy of photons to the gap size of the minority electrons we explored the effect of the gap on the demagnetization dynamics. During this work we used for the first time OPA (Optical Parametrical Amplifier) for the generation of the laser irradiation in a long-wave regime. We tested it on the FETOSPEX-beamline in BASSYII electron storage ring. With this new technique we measured wavelength dependent demagnetization dynamics. We estimated that the demagnetization time is in a correlation with photon energy of the excitation pulse. Higher photon energy leads to the faster demagnetization in our material. We associate this result with the existence of the energy-gap for minority electrons and explained it with Elliot-Yaffet-scattering events. Additionally we applied new probe-method for magnetization state in this work and verified their effectivity. It is about the well-known XMCD (X-ray magnetic circular dichroism) which we adopted for the measurements in reflection geometry. Static experiments confirmed that the pure electronic dynamics can be separated from the magnetic one. We used photon energy fixed on the L3 of the corresponding elements with circular polarization. Appropriate incidence angel was estimated from static measurements. Using this probe method in dynamic measurements we explored electronic and magnetic dynamics in this alloy.
The immense popularity of online communication services in the last decade has not only upended our lives (with news spreading like wildfire on the Web, presidents announcing their decisions on Twitter, and the outcome of political elections being determined on Facebook) but also dramatically increased the amount of data exchanged on these platforms. Therefore, if we wish to understand the needs of modern society better and want to protect it from new threats, we urgently need more robust, higher-quality natural language processing (NLP) applications that can recognize such necessities and menaces automatically, by analyzing uncensored texts. Unfortunately, most NLP programs today have been created for standard language, as we know it from newspapers, or, in the best case, adapted to the specifics of English social media.
This thesis reduces the existing deficit by entering the new frontier of German online communication and addressing one of its most prolific forms—users’ conversations on Twitter. In particular, it explores the ways and means by how people express their opinions on this service, examines current approaches to automatic mining of these feelings, and proposes novel methods, which outperform state-of-the-art techniques. For this purpose, I introduce a new corpus of German tweets that have been manually annotated with sentiments, their targets and holders, as well as lexical polarity items and their contextual modifiers. Using these data, I explore four major areas of sentiment research: (i) generation of sentiment lexicons, (ii) fine-grained opinion mining, (iii) message-level polarity classification, and (iv) discourse-aware sentiment analysis. In the first task, I compare three popular groups of lexicon generation methods: dictionary-, corpus-, and word-embedding–based ones, finding that dictionary-based systems generally yield better polarity lists than the last two groups. Apart from this, I propose a linear projection algorithm, whose results surpass many existing automatically-generated lexicons. Afterwords, in the second task, I examine two common approaches to automatic prediction of sentiment spans, their sources, and targets: conditional random fields (CRFs) and recurrent neural networks, obtaining higher scores with the former model and improving these results even further by redefining the structure of CRF graphs. When dealing with message-level polarity classification, I juxtapose three major sentiment paradigms: lexicon-, machine-learning–, and deep-learning–based systems, and try to unite the first and last of these method groups by introducing a bidirectional neural network with lexicon-based attention. Finally, in order to make the new classifier aware of microblogs' discourse structure, I let it separately analyze the elementary discourse units of each tweet and infer the overall polarity of a message from the scores of its EDUs with the help of two new approaches: latent-marginalized CRFs and Recursive Dirichlet Process.
Dieses Buch liefert überblicksartig Befunde einer Wirkungsforschung im Fach Sport und behandelt Determinanten und Konsequenzen von Leistungen von Schülern und Schülerinnen im Sportunterricht. Ausgehend vom Angebot-Nutzen-Modell (nach Helmke, 2010) analysiert Sara Seiler distale und proximale Merkmale des Lehr-Lern-Prozesses in ihrer Einflussnahme auf Lernleistungen von Schülern und Schülerinnen in einem Mehrebenenmodell. Entgegen einer Reduzierung auf kognitive Lernleistungen werden motorische, motivationale, volitionale und personale Aspekte als Lernleistungen im Sport diskutiert.
The Italian Army’s participation in Hitler’s war against the Soviet Union has remained unrecognized and understudied. Bastian Matteo Scianna offers a wide-ranging, in-depth corrective. Mining Italian, German and Russian sources, he examines the history of the Italian campaign in the East between 1941 and 1943, as well as how the campaign was remembered and memorialized in the domestic and international arena during the Cold War. Linking operational military history with memory studies, this book revises our understanding of the Italian Army in the Second World War.
The fabrication of 1D nanostrands composed of stimuli responsive microgels has been shown in this work. Microgels are well known materials able to respond to various stimuli from outer environment. Since these microgels respond via a volume change to an external stimulus, a targeted mechanical response can be achieved. Through carefully choosing the right composition of the polymer matrix, microgels can be designed to react precisely to the targeted stimuli (e.g. drug delivery via pH and temperature changes, or selective contractions through changes in electrical current125).
In this work, it was aimed to create flexible nano-filaments which are capable of fast anisotropic contractions similar to muscle filaments. For the fabrication of such filaments or strands, nanostructured templates (PDMS wrinkles) were chosen due to a facile and low-cost fabrication and versatile tunability of their dimensions. Additionally, wrinkling is a well-known lithography-free method which enables the fabrication of nanostructures in a reproducible manner and with a high long-range periodicity.
In Chapter 2.1, it was shown for the first time that microgels as soft matter particles can be aligned to densely packed microgel arrays of various lateral dimensions. The alignment of microgels with different compositions (e.g. VCL/AAEM, NIPAAm, NIPAAm/VCL and charged microgels) was shown by using different assembly techniques (e.g. spin-coating, template confined molding). It was chosen to set one experimental parameter constant which was the SiOx surface composition of the templates and substrates (e.g. oxidized PDMS wrinkles, Si-wafers and glass slides). It was shown that the fabrication of nanoarrays was feasible with all tested microgel types. Although the microgels exhibited different deformability when aligned on a flat surface, they retained their thermo-responsivity and swelling behavior.
Towards the fabrication of 1D microgel strands interparticle connectivity was aspired. This was achieved via different cross-linking methods (i.e. cross-linking via UV-irradiation and host-guest complexation) discussed in Chapter 2.2. The microgel arrays created by different assembly methods and microgel types were tested for their cross-linking suitability. It was observed that NIPAAm based microgels cannot be cross-linked with UV light. Furthermore, it was found that these microgels exhibit a strong surface-particle-interaction and therefore could not be detached from the given substrates. In contrast to the latter, with VCL/AAEM based microgels it was possible to both UV cross-link them based on the keto-enol tautomerism of the AAEM copolymer, and to detach them from the substrate due to the lower adhesion energy towards SiOx surfaces. With VCL/AAEM microgels long, one-dimensional microgel strands could be re-dispersed in water for further analysis. It has also been shown that at least one lateral dimension of the free dispersed 1D microgel strands is easily controllable by adjusting the wavelength of the wrinkled template. For further work, only VCL/AAEM based microgels were used to focus on the main aim of this work, i.e. the fabrication of 1D microgel nanostrands.
As an alternative to the unspecific and harsh UV cross-linking, the host-guest complexation via diazobenzene cross-linkers and cyclodextrin hosts was explored. The idea behind this approach was to give means to a future construction kit-like approach by incorporation of cyclodextrin comonomers in a broad variety of particle systems (e.g. microgels, nanoparticles). For this purpose, VCL/AAEM microgels were copolymerized with different amounts of mono-acrylate functionalized β-cyclodextrin (CD). After successfully testing the cross-linking capability in solution, the cross-linking of aligned VCL/AAEM/CD microgels was tried. Although the cross-linking worked well, once the single arrays came into contact to each other, they agglomerated. As a reason for this behavior residual amounts of mono-complexed diazobenzene linkers were suspected. Thus, end-capping strategies were tried out (e.g. excess amounts of β-cyclodextrin and coverage with azobenzene functionalized AuNPs) but were unsuccessful. With deeper thought, entropy effects were taken into consideration which favor the release of complexed diazobenzene linker leading to agglomerations. To circumvent this entropy driven effect, a multifunctional polymer with 50% azobenzene groups (Harada polymer) was used. First experiments with this polymer showed promising results regarding a less pronounced agglomeration (Figure 77). Thus, this approach could be pursued in the future. In this chapter it was found out that in contrast to pearl necklace and ribbon like formations, particle alignment in zigzag formation provided the best compromise in terms of stability in dispersion (see Figure 44a and Figure 51) while maintaining sufficient flexibility.
For this reason, microgel strands in zigzag formation were used for the motion analysis described in Chapter 2.3. The aim was to observe the properties of unrestrained microgel strands in solution (e.g. diffusion behavior, rotational properties and ideally, anisotropic contraction after temperature increase). Initially, 1D microgel strands were manipulated via AFM in a liquid cell setup. It could be observed that the strands required a higher load force compared to single microgels to be detached from the surface. However, with the AFM it was not possible to detach the strands in a controllable manner but resulted in a complete removal of single microgel particles and a tearing off the strands from the surface, respectively. For this reason, to observe the motion behavior of unrestrained microgel strands in solution, confocal microscopy was used. Furthermore, to hinder an adsorption of the strands, it was found out that coating the surface of the substrates with a repulsive polymer film was beneficial. Confocal and wide-field microscopy videos showed that the microgel strands exhibit translational and rotational diffusive motion in solution without perceptible bending. Unfortunately, with these methods the detection of the anisotropic stimuli responsive contraction of the free moving microgel strands was not possible. To summarize, the flexibility of microgel strands is more comparable to the mechanical behavior of a semi flexible cable than to a yarn. The strands studied here consist of dozens or even hundreds of discrete submicron units strung together by cross-linking, having few parallels in nanotechnology.
With the insights gained in this work on microgel-surface interactions, in the future, a targeted functionalization of the template and substrate surfaces can be conducted to actively prevent unwanted microgel adsorption for a given microgel system (e.g. PVCL and polystyrene coating235). This measure would make the discussed alignment methods more diverse. As shown herein, the assembly methods enable a versatile microgel alignment (e.g. microgel meshes, double and triple strands). To go further, one could use more complex templates (e.g. ceramic rhombs and star shaped wrinkles (Figure 14) to expand the possibilities of microgel alignment and to precisely control their aspect ratios (e.g. microgel rods with homogeneous size distributions).
This is a publication-based dissertation comprising three original research stud-ies (one published, one submitted and one ready for submission; status March 2019). The dissertation introduces a generic computer model as a tool to investigate the behaviour and population dynamics of animals in cyclic environments. The model is further employed for analysing how migratory birds respond to various scenarios of altered food supply under global change. Here, ecological and evolutionary time-scales are considered, as well as the biological constraints and trade-offs the individual faces, which ultimately shape response dynamics at the population level. Further, the effect of fine-scale temporal patterns in re-source supply are studied, which is challenging to achieve experimentally. My findings predict population declines, altered behavioural timing and negative carry-over effects arising in migratory birds under global change. They thus stress the need for intensified research on how ecological mechanisms are affected by global change and for effective conservation measures for migratory birds. The open-source modelling software created for this dissertation can now be used for other taxa and related research questions. Overall, this thesis improves our mechanistic understanding of the impacts of global change on migratory birds as one prerequisite to comprehend ongoing global biodiversity loss. The research results are discussed in a broader ecological and scientific context in a concluding synthesis chapter.