Refine
Year of publication
Document Type
- Doctoral Thesis (95) (remove)
Language
- German (95) (remove)
Keywords
- Geochemie (3)
- Ostantarktis (2)
- carbon dioxide (2)
- climate change (2)
- 3D numerical models (1)
- 3D numerische Modelle (1)
- AMOC (1)
- Absorptionseigenschaften (1)
- Aeromagnetik (1)
- Amery Oasis (1)
Institute
- Institut für Geowissenschaften (95) (remove)
Im Rahmen der Dissertation wurden an Wässern und freien Gasen aus Thermalquellen sowie an weniger als 5 Millionen Jahre alten basischen Vulkaniten des zentralandinen Puna-Hochplateaus (NE-Argentinien) umfangreiche element- und isotopengeochemische Untersuchungen durchgeführt und die Edelgasgehalte und -isotopensignaturen in diesen Medien bestimmt. Damit soll ein Beitrag zum besseren Verständnis der jüngeren Subduktionsgeschichte im Bereich der südlichen Zentralanden geleistet, die Wechselwirkungen zwischen ozeanischer Unter- und kontinentaler Oberplatte sichtbar gemacht und die Edelgassystematik verbessert werden. Wie die Ergebnisse der Untersuchungen an Gasen aus den Thermalquellen der Puna-Region zeigen, ist der Anteil an Mantel-Helium in den Thermalquellen dieser Region mit bis zu 67 % wesentlich höher als in der westlich gelegenen vulkanisch aktiven Westkordillere und den anderen angrenzenden Gebieten. In einigen Quellen konnten sogar Anteile an Mantel-Neon nachgewiesen werden, was aufgrund von Überlagerungen mit Neon atmosphärischen und krustalen Ursprungs weltweit bisher nur vereinzelt gelungen ist. Für kontinentale Bereiche mit großer Krustendicke ist ein solch starker Mantelgasfluss äußerst ungewöhnlich und bedeutet, dass Mantelschmelzen bis in die Kruste aufgedrungen sind und tief reichende Wegsamkeiten existieren, so dass die Mantelgase aufsteigen können, ohne stark krustal beeinflusst zu werden. Dass im Bereich der Puna rezent Mantelmaterial in die Kruste aufsteigt, zu diesem Ergebnis kommen auch aktuelle seismologische Untersuchungen. Zudem wurden junge, vorwiegend monogenetische Basalte bis basaltische Andesite geochemisch auf ihre Haupt-, Neben- und Spurenbestandteile sowie ihre Gehalte an Seltenenerdenelementen hin untersucht. Auch wurden die Isotopenverhältnisse von Sr, Nd und Pb in den Gesteinen bestimmt und petrographisch-mineralogische Analysen der darin enthaltenen Olivine und Pyroxene durchgeführt. Wie die Resultate belegen, haben die Magmen bei ihrem Aufstieg durch die Erdkruste insbesondere Material aus der Oberkruste assimiliert und sind zudem durch Fluide aus der abtauchenden Platte beeinflusst worden. Damit konnte gezeigt werden, dass einfache geochemische Methoden allein nicht ausreichen, um die Mantelquelle der Magmen ermitteln oder Aussagen über die Asthenosphärendynamik in der Region machen zu können. Im Gegensatz dazu zeigen die Messungen der Edelgasisotopenverhältnisse in den Fluideinschlüssen der Olivine und Pyroxene, dass deren Edelgaszusammensetzung nicht durch Krustenkontamination beeinflusst wurde, weil die Magmen erst nach der Olivin- bzw. Pyroxen-Kristallisation Schmelzen aus der Oberkruste assimiliert haben. Darüber hinaus konnten durch die Edelgasisotopenmessungen die bisher höchsten magmatischen He- und Ne-Isotopenverhältnisse von ganz Südamerika nachgewiesen werden. Aus der unterschiedlichen Höhe der Messwerte ist zu schließen, dass die im Osten der Puna vorkommenden älteren Laven aus einem nichtkonvektiven (lithosphärischen) Mantel stammen, während die am vulkanischen Bogen und Westrand der Puna gelegenen jüngeren Laven, ihren Ursprung in einer konvektiven (asthenosphärischen) Mantelquelle haben. Zudem konnte gezeigt werden, dass der Mantelgasfluss in der Region in den letzten 5 Millionen Jahren stark zunahm und sich die Eruption von mantelstämmigen basischen Laven in dieser Zeit kontinuierlich in westliche Richtung zum aktiven Vulkanbogen hin verlagerte. Im daraus abgeleiteten Modell beruht dieser Prozess (1) auf einer an die Kontinentalverschiebung gekoppelten W-Drift des Kontinents und (2) auf einem mit der Versteilung der Unterplatte verbundenen Vordringen des subkontinentalen asthenosphärischen Mantels nach W, nach dem Ende der Subduktion des unterseeischen aseismischen Juan Fernández-Rückens in der Region. Zudem gibt es starke Argumente dafür, dass die asthenosphärischen Magmen aus einer fluidreichen Zone in 500 – 600 km Tiefe parallel zur subduzierten Platte aufsteigen und nicht, wie bisher angenommen, durch Schmelzbildung in Bereichen unter 200 km Tiefe, allein durch Entwässerung der abtauchenden Platte erzeugt werden. Zu diesem Resultat führt vor allem die Kombination der He-Isotopenverhältnisse mit Ergebnissen seismologischer Untersuchungen.
In dieser Arbeit wird das regionale Klimamodell HIRHAM mit einer horizontalen Auflösung von 50 km und 19 vertikalen Schichten erstmals auf den asiatischen Kontinent angewendet, um die indische Monsunzirkulation unter rezenten und paläoklimatischen Bedingungen zu simulieren. Das Integrationsgebiet des Modells erstreckt sich von etwa 0ºN - 50ºN und 42ºE - 110ºE und bedeckt dabei sowohl die hohe Topographie des Himalajas und Tibet Plateaus als auch den nördlichen Indischen Ozean. Das Ziel besteht in der Beschreibung der regionalen Kopplung zwischen der Monsunzirkulation und den orographischen sowie diabatischen Antriebsmechanismen. Eine 44-jährige Modellsimulation von 1958-2001, die am seitlichen und unteren Rand von ECMWF Reanalysen (ERA40) angetrieben wird, bildet die Grundlage für die Validierung der Modellergebnisse mit Beobachtungen auf der Basis von Stations- und Gitterdatensätzen. Der Fokus liegt dabei auf der atmosphärischen Zirkulation, der Temperatur und dem Niederschlag im Sommer- und Wintermonsun, wobei die Qualität des Modells sowohl in Bezug zur langfristigen und dekadischen Klimatologie als auch zur interannuellen Variabilität evaluiert wird. Im Zusammenhang mit einer realistischen Reproduktion der Modelltopographie kann für die Muster der Zirkulation und Temperatur eine gute Übereinstimmung zwischen Modell und Daten nachgewiesen werden. Der simulierte Niederschlag zeigt eine bessere Übereinstimmung mit einem hoch aufgelösten Gitterdatensatz über der Landoberfläche Zentralindiens und in den Hochgebirgsregionen, der den Vorteil des Regionalmodells gegenüber der antreibenden Reanalyse hervorhebt. In verschiedenen Fall- und Sensitivitätsstudien werden die wesentlichen Antriebsfaktoren des indischen Monsuns (Meeresoberflächentemperaturen, Stärke des winterlichen Sibirischen Hochs und Anomalien der Bodenfeuchte) untersucht. Die Ergebnisse machen deutlich, dass die Simulation dieser Mechanismen auch mit einem Regionalmodell sehr schwierig ist, da die Komplexität des Monsunsystems hochgradig nichtlinear ist und die vor allem subgridskalig wirkenden Prozesse im Modell noch nicht ausreichend parametrisiert und verstanden sind. Ein paläoklimatisches Experiment für eine 44-jährige Zeitscheibe im mittleren Holozän (etwa 6000 Jahre vor heute), die am Rand von einer globalen ECHAM5 Simulation angetrieben wird, zeigt markante Veränderungen in der Intensität des Monsuns durch die unterschiedliche solare Einstrahlung, die wiederum Einflüsse auf die SST, die Zirkulation und damit auf die Niederschlagsmuster hat.
Veränderungen im thermalen Regime des Permafrosts verursachen Störungen der Erdoberfläche. Diese Veränderungen werden durch die in der Arktis seit Jahrzehnten ansteigenden Temperaturen verstärkt. Thermokarst ist ein Prozess, welcher die Erdoberfläche durch Schmelzen von Grundeis, oder Auftauen von Permafrost absacken lässt, wodurch charakteristische Landformen entstehen. Thermokarst ist vor allem entlang von Hängen weit verbreitet und die Anzahl der damit verbundenen Landformen in der Arktis steigt stetig an. Dieser Prozess mobilisiert große Mengen an Material, welche in Richtung Meer transportiert oder entlang von Hängen akkumuliert werden. Während entlang von Hängen auftretender Thermokarst terrestrische sowie aquatische Ökosysteme stark verändert, ist dessen Einfluss auf regionaler Skala zurzeit noch Gegenstand der Forschung.
In dieser Arbeit quantifizieren wir die Auswirkungen von Thermokarstprozessen entlang von Hängen auf die umliegenden Ökosysteme der küstennahen Täler und Nahküstenbereiche entlang der Yukon Küste in Kanada. Mittels überwachtem maschinellen Lernen haben wir geomorphische Faktoren identifiziert, welche die Entwicklung von retrogressiven Auftaurutschungen (RTS) begünstigen. RTS sind eine Erscheinungsform von Thermokarst entlang von Hängen. Die Küstengeomorphologie, sowie der Grundeistyp und -inhalt sind die wesentlichen bestimmenden Faktoren für das Auftreten von RTS. Wir haben Luftbildaufnahmen und Satellitenbilder genutzt, um die Evolution von RTS im Zeitraum von 1952 bis 2011 zu verfolgen. Während dieser Zeit ist die Anzahl und Ausdehnung von RTS linear angestiegen. Wir zeigen, dass 56% der RTS welche entlang der Küste in 2011 identifiziert wurden, 16.6 × 106 m3 an Material erodiert haben. Hiervon wurden 45% durch Küstenprozesse entlang der Küste transportiert. RTS tragen wesentlich zu dem Kohlenstoff-Budget des Nahküstenbereiches bei: 17% der in 2011 identifizierten RTS, haben 0.6% des organischen Kohlenstoffes transportiert, welcher durch Küstenerosion entlang der Yukon Küste jährlich freigesetzt wird. Um den Einfluss von Thermokarst entlang von Hängen auf das terrestrische Ökosystem zu beurteilen, haben wir die räumliche Verteilung von organischem Bodenkohlenstoff und Stickstoff (SOC, TN) entlang von Hangprofilen in drei arktischen Tälern analysiert.Wir weisen auf eine hohe räumliche Variabilität in der Verteilung von SOC und TN hin, welche auf komplexe Bodenprozesse zurückzuführen ist, welche entlang von Hängen auftreten. Thermokarst entlang von Hängen hat einen großen Einfluss auf die Degradierung von organischem Material und die Speicherung von SOC und TN.
Die Elbe und ihr Einzugsgebiet sind vom Klimawandel betroffen. Um die Wirkkette von projizierten Klimaveränderungen auf den Wasserhaushalt und die daraus resultierenden Nährstoffeinträge und -frachten für große Einzugsgebiete wie das der Elbe zu analysieren, können integrierte Umweltmodellsysteme eingesetzt werden. Fallstudien, die mit diesen Modellsystemen ad hoc durchgeführt werden, repräsentieren den Istzustand von Modellentwicklungen und -unsicherheiten und sind damit statisch.
Diese Arbeit beschreibt den Einstieg in die Dynamisierung von Klimafolgenanalysen im Elbegebiet. Dies umfasst zum einen eine Plausibilitätsprüfung von Auswirkungsrechnungen, die mit Szenarien des statistischen Szenariengenerators STARS durchgeführt wurden, durch den Vergleich mit den Auswirkungen neuerer Klimaszenarien aus dem ISI-MIP Projekt, die dem letzten Stand der Klimamodellierung entsprechen. Hierfür wird ein integriertes Modellsystem mit "eingefrorenem Entwicklungsstand" verwendet. Die Klimawirkungsmodelle bleiben dabei unverändert. Zum anderen wird ein Bestandteil des integrierten Modellsystems – das ökohydrologische Modell SWIM – zu einer "live"-Version weiterentwickelt. Diese wird durch punktuelle Testung an langjährigen Versuchsreihen eines Lysimeterstandorts sowie an aktuellen Abflussreihen validiert und verbessert.
Folgende Forschungsfragen werden bearbeitet: (i) Welche Effekte haben unterschiedliche Klimaszenarien auf den Wasserhaushalt im Elbegebiet und ist eine Neubewertung der Auswirkung des Klimawandels auf den Wasserhaushalt notwendig?, (ii) Was sind die Auswirkungen des Klimawandels auf die Nährstoffeinträge und -frachten im Elbegebiet sowie die Wirksamkeit von Maßnahmen zur Reduktion der Nährstoffeinträge?, (iii) Ist unter der Nutzung (selbst einer sehr geringen Anzahl) verfügbarer tagesaktueller Witterungsdaten in einem stark heterogenen Einzugsgebiet eine valide Ansprache der aktuellen ökohydrologischen Situation des Elbeeinzugsgebiets möglich?
Die aktuellen Szenarien bestätigen die Richtung, jedoch nicht das Ausmaß der Klimafolgen: Die Rückgänge des mittleren jährlichen Gesamtabflusses und der monatlichen Abflüsse an den Pegeln bis Mitte des Jahrhunderts betragen für das STARS-Szenario ca. 30 %. Die Rückgänge bei den auf dem ISI-MIP-Szenario basierenden Modellstudien liegen hingegen nur bei ca. 10 %. Hauptursachen für diese Divergenz sind die Unterschiede in den Niederschlagsprojektionen sowie die Unterschiede in der jahreszeitlichen Verteilung der Erwärmung. Im STARS-Szenario gehen methodisch bedingt die Niederschläge zurück und der Winter erwärmt sich stärker als der Sommer. In dem ISI-MIP-Szenario bleiben die Niederschläge nahezu stabil und die Erwärmung im Sommer und Winter unterscheidet sich nur geringfügig.
Generell nehmen die Nährstoffeinträge und -frachten mit den Abflüssen in beiden Szenarien unterproportional ab, wobei die Frachten jeweils stärker als die Einträge zurückgehen. Die konkreten Effekte der Abflussänderungen sind gering und liegen im einstelligen Prozentbereich. Gleiches gilt für die Unterschiede zwischen den Szenarien. Der Effekt von zwei ausgewählten Maßnahmen zur Reduktion der Nährstoffeinträge und -frachten unterscheidet sich bei verschiedenen Abflussverhältnissen, repräsentiert durch unterschiedliche Klimaszenarien in unterschiedlich feuchter Ausprägung, ebenfalls nur geringfügig.
Die Beantwortung der ersten beiden Forschungsfragen zeigt, dass die Aktualisierung von Klimaszenarien in einem ansonsten "eingefrorenen" Verbund von ökohydrologischen Daten und Modellen eine wichtige Prüfoption für die Plausibilisierung von Klimafolgenanalysen darstellt. Sie bildet die methodische Grundlage für die Schlussfolgerung, dass bei der Wassermenge eine Neubewertung der Klimafolgen notwendig ist, während dies bei den Nährstoffeinträgen und -frachten nicht der Fall ist.
Die zur Beantwortung der dritten Forschungsfrage mit SWIM-live durchgeführten Validierungsstudien ergeben Diskrepanzen am Lysimeterstandort und bei den Abflüssen aus den Teilgebieten Saale und Spree. Sie lassen sich zum Teil mit der notwendigen Interpolationsweite der Witterungsdaten und dem Einfluss von Wasserbewirtschaftungsmaßnahmen erklären. Insgesamt zeigen die Validierungsergebnisse, dass schon die Pilotversion von SWIM-live für eine ökohydrologische Ansprache des Gebietswasserhaushaltes im Elbeeinzugsgebiet genutzt werden kann. SWIM-live ermöglicht eine unmittelbare Betrachtung und Beurteilung simulierter Daten. Dadurch werden Unsicherheiten bei der Modellierung direkt offengelegt und können infolge dessen reduziert werden. Zum einen führte die Verdichtung der meteorologischen Eingangsdaten durch die Verwendung von nun ca. 700 anstatt 19 Klima- bzw. Niederschlagstationen zu einer Verbesserung der Ergebnisse. Zum anderen wurde SWIM-live beispielhaft für einen Zyklus aus punktueller Modellverbesserung und flächiger Überprüfung der Simulationsergebnisse genutzt.
Die einzelnen Teilarbeiten tragen jeweils zur Dynamisierung von Klimafolgenanalysen im Elbegebiet bei. Der Anlass hierfür war durch die fehlerhaften methodischen Grundlagen von STARS gegeben. Die Sinnfälligkeit der Dynamisierung ist jedoch nicht an diesen konkreten Anlass gebunden, sondern beruht auf der grundlegenden Einsicht, dass Ad-hoc-Szenarienanalysen immer auch pragmatische Vereinfachungen zugrunde liegen, die fortlaufend überprüft werden müssen.
Low molecular weight organic acids (LMWOAs) are important nutrients for microbes. However, most LMWOAs do not exist freely in the environment but are bound to macromolecular organic matter, e.g. kerogen, lignite and coal. During burial and geological maturation of sedimentary macromolecular organic matter biological and abiological processes promote the liberation of LMWOAs into the surrounding sediment. Through this process, microbes in sedimentary subsurface environments are supplied with essential nutrients. To estimate the feedstock potential of buried macromolecular organic matter to many environments it is important to determine the amount of LMWOAs that are bound to such a matrix. However, high-pressure and high temperature are a key feature of deep subsurface environments, and these physical parameters have a profound influence on chemical reaction kinetics. Therefore it is essential for the estimation of the feedstock potential to generate high-pressure and high temperature for the liberation of LMWOAs to recreate true in-situ conditions. This work presents a newly developed, inexpensive incubation system for biological and geological samples. It allows the application of high-pressure and high temperature as well as a subsampling of the liquid phase without loss of pressure, thereby not disturbing the on-going processes. When simulating the liberation of LMWOAs from sedimentary organic matter, the newly developed incubation system produces more realistic results than other extraction systems like Soxhlet. The extraction products remain in the extraction medium throughout the extraction, influencing the chemical conditions of the extraction medium. Sub-bituminous coal samples from New Zealand as well as lignite samples from Germany were extracted at elevated temperature (90˚C) and pressure (5 MPa). The main LMWOAs released from these low rank coals were formate, acetate and oxalate. Extraction efficiency was increased by two to four times for formate, acetate and oxalate in comparison to existing extraction methods without pressurisation and with demineralised water. This shows the importance of pressure for the simulation of true in-situ conditions and suggests that the amount of bioavailable LMWOAs is higher than previously thought. With the increase in carbon capture and storage (CCS) and the enhanced recovery of oil and gas (EOR/EGR), more and more CO2 becomes injected into the underground. However, the effects of elevated concentrations of carbon dioxide on sedimentary organic matter are rarely investigated. As the incuabtion system allows the manipulation of the composition and partial pressure of dissolved gasses, the effect of highly gas-enriched (CO2, CO2/SO2, CO2/NO2; to simulate flue gas conditions) waters on the extraction yield of LMWOAs from macromolecular organic matter was evaluated. For sub-bituminous coal the concentrations of all LMWAOs decreased upon the addition of gas, irrespective of its composition, whereas for lignite formate always and acetate mostly increased, while oxalate decreased. This suggests an positive effect on the nutrient supply for the subsurface microbiota of lignite layers, as formate and acetate are the most common LMWOAs used for microbial metabolism. In terrestrial mud volcanoes (TMVs), sedimentary material is rapidly ascending from great depth to the surface. Therefore LMWOAs that were produced from buried macromolecular organic matter at depth are also brought up to the surface, and fuel heterotrophic microbial ecosystems at the surface. TMVs represent geochemically and microbiologically diverse habitats, which are supplied with organic substrates and electron acceptors from deep-seated hydrocarbon-generating systems and intersected shallow aquifers, respectively. The main electron donor in TMVs in Azerbaijan is sulphate, and microbial sulphate reduction leads to the production of a wide range of reduced sulphur species that are key players in several biological processes. In our study we estimated the effect of LMWOAs on the sulphur metabolising activity of microorganims in TMVs from Azerbaijan. The addition of a mixture of volatile fatty acids containing acetate and other LMWOAs showed significant positive response to the sulphate reduction rate (SRR) of samples of several mud volcanoes. Further investigations on the temperature dependency of the SRR and the characterisation of thermophilic sulphate-reducing bacteria (SRB) showed a connection between the deep hot subsurface and the surface.
Der zentralasiatische Naturraum, wie er sich uns heute präsentiert, ist das Ergebnis eines Zusammenwirkens vieler verschiedener Faktoren über Jahrmillionen hinweg. Im aktuellen Kontext des Klimawandels zeigt sich jedoch, wie stark sich Stoffflüsse auch kurzfristig ändern und dabei das Gesicht der Landschaft verwandeln können. Die Gobi-Wüste in der Inneren Mongolei (China), als Teil der gleichnamigen Trockenregionen Nordwestchinas, ist aufgrund der Ausgestaltung ihrer landschaftsprägenden Elemente sowie ihrer Landschaftsdynamik, im Zusammenhang mit der Lage zum Tibet-Plateau, in den Fokus der klimageschichtlichen Grundlagenforschung gerückt. Als großes Langzeitarchiv unterschiedlichster fluvialer, lakustriner und äolischer Sedimente stellt sie eine bedeutende Lokalität zur Rekonstruktion von lokalen und regionalen Stoffflüssen dar.. Andererseits ist die Gobi-Wüste zugleich auch eine bedeutende Quelle für den überregionalen Staubtransport, da sie aufgrund der klimatischen Bedingungen insbesondere der Erosion durch Ausblasung preisgegeben wird. Vor diesem Hintergrund erfolgten zwischen 2011 und 2014, im Rahmen des BMBF-Verbundprogramms WTZ Zentralasien – Monsundynamik & Geoökosysteme (Förderkennzeichen 03G0814), mehrere deutsch-chinesische Expeditionen in das Ejina-Becken (Innere Mongolei) und das Qilian Shan-Vorland. Im Zuge dieser Expeditionen wurden für eine Bestimmung potenzieller Sedimentquellen erstmals zahlreiche Oberflächenproben aus dem gesamten Einzugsgebiet des Heihe (schwarzer Fluss) gesammelt. Zudem wurden mit zwei Bohrungen im inneren des Ejina-Beckens, ergänzende Sedimentbohrkerne zum bestehenden Bohrkern D100 (siehe Wünnemann (2005)) abgeteuft, um weit reichende, ergänzende Informationen zur Landschaftsgeschichte und zum überregionalen Sedimenttransfer zu erhalten. Gegenstand und Ziel der vorliegenden Doktorarbeit ist die sedimentologisch-mineralogische Charakterisierung des Untersuchungsgebietes in Bezug auf potenzielle Sedimentquellen und Stoffflüsse des Ejina-Beckens sowie die Rekonstruktion der Ablagerungsgeschichte eines dort erbohrten, 19m langen Sedimentbohrkerns (GN100). Schwerpunkt ist hierbei die Klärung der Sedimentherkunft innerhalb des Bohrkerns sowie die Ausweisung von Herkunftssignalen und möglichen Sedimentquellen bzw. Sedimenttransportpfaden. Die methodische Herangehensweise basiert auf einem Multi-Proxy-Ansatz zur Charakterisierung der klastischen Sedimentfazies anhand von Geländebeobachtungen, lithologisch-granulometrischen und mineralogisch-geochemischen Analysen sowie statistischen Verfahren. Für die mineralogischen Untersuchungen der Sedimente wurde eine neue, rasterelektronenmikroskopische Methode zur automatisierten Partikelanalyse genutzt und den traditionellen Methoden gegenübergestellt. Die synoptische Betrachtung der granulometrischen, geochemischen und mineralogischen Befunde der Oberflächensedimente ergibt für das Untersuchungsgebiet ein logisches Kaskadenmodell mit immer wiederkehrenden Prozessbereichen und ähnlichen Prozesssignalen. Die umfangreichen granulometrischen Analysen deuten dabei auf abnehmende Korngrößen mit zunehmender Entfernung vom Qilian Shan hin und ermöglichen die Identifizierung von vier texturellen Signalen: den fluvialen Sanden, den Dünensanden, den Stillwassersedimenten und Stäuben. Diese Ergebnisse können als Interpretationsgrundlage für die Korngrößenanalysen des Bohrkerns genutzt werden. Somit ist es möglich, die Ablagerungsgeschichte der Bohrkernsedimente zu rekonstruieren und in Verbindung mit eigenen und literaturbasierten Datierungen in einen Gesamtkontext einzuhängen. Für das Untersuchungsgebiet werden somit vier Ablagerungsphasen ausgewiesen, die bis in die Zeit des letzten glazialen Maximums (LGM) zurückreichen. Während dieser Ablagerungsphasen kam es im Zuge unterschiedlicher Aktivitäts- und Stabilitätsphasen zu einer kontinuierlichen Progradation und Überprägung des Schwemmfächers. Eine besonders aktive Phase kann zwischen 8 ka und 4 ka BP festgestellt werden, während der es aufgrund zunehmender fluvialer Aktivitäten zu einer deutlich verstärkten Schwemmfächerdynamik gekommen zu sein scheint. In den Abschnitten davor und danach waren es vor allem äolische Prozesse, die zu einer Überprägung des Schwemmfächers geführt haben. Hinsichtlich der mineralogischen Herkunftssignale gibt es eine große Variabilität. Dies spiegelt die enorme Heterogenität der Geologie des Untersuchungsgebietes wider, wodurch die räumlichen Signale nicht sehr stark ausgeprägt sind. Dennoch, können für das Einzugsgebiet drei größere Bereiche deklariert werden, die als Herkunftsgebiet in Frage kommen. Das östliche Qilian Shan Vorland zeichnet sich dabei durch deutlich höhere Chloritgehalte als primäre Quelle für die Sedimente im Ejina-Becken aus. Sie unterscheiden sich insbesondere durch stark divergierende Chloritgehalte in der Tonmineral- und Gesamtmineralfraktion, was das östliche Qilian Shan Vorland als primäre Quelle für die Sedimente im Ejina-Becken auszeichnet. Dies steht in Zusammenhang mit den Grünschiefern, Ophioliten und Serpentiniten in diesem Bereich. Geochemisch deutet vor allem das Cr/Rb-Verhältnis eine große Variabilität innerhalb des Einzugsgebietes an. Auch hier ist es das östliche Vorland, welches aufgrund seines hohen Anteils an mafischen Gesteinen reich an Chromiten und Spinellen ist und sich somit vom restlichen Untersuchungsgebiet abhebt. Die zeitliche aber auch die generelle Variabilität der Sedimentherkunft lässt sich in den Bohrkernsedimenten nicht so deutlich nachzeichnen. Die mineralogisch-sedimentologischen Eigenschaften der erbohrten klastischen Sedimente zeugen zwar von zwischenzeitlichen Änderungen bei der Sedimentherkunft, diese sind jedoch nicht so deutlich ausgeprägt, wie es die Quellsignale in den Oberflächensedimenten vermuten lassen. Ein Grund dafür scheint die starke Vermischung unterschiedlichster Sedimente während des Transportes zu sein. Die Kombination der Korngrößenergebnisse mit den Befunden der Gesamt- und Schwermineralogie deuten darauf hin, dass es zwischenzeitlich eine Phase mit überwiegend äolischen Prozessen gegeben hat, die mit einem Sedimenteintrag aus dem westlichen Bei Shan in Verbindung stehen. Neben der Zunahme ultrastabiler Schwerminerale wie Zirkon und Granat und der Abnahme opaker Schwerminerale, weisen vor allem die heutigen Verhältnisse darauf hin. Der Vergleich der traditionellen Schwermineralanalyse mit der Computer-Controlled-Scanning-Electron-Microscopy (kurz: CCSEM), die eine automatisierte Partikelauswertung der Proben ermöglicht, zeigt den deutlichen Vorteil der modernen Analysemethode. Neben einem zeitlichen Vorteil, den man durch die automatisierte Abarbeitung der vorbereiteten Proben erlangen kann, steht vor allem die deutlich größere statistische Signifikanz des Ergebnisses im Vordergrund. Zudem können mit dieser Methode auch chemische Varietäten einiger Schwerminerale bestimmt werden, die eine noch feinere Klassifizierung und sicherere Aussagen zu einer möglichen Sedimentherkunft ermöglichen. Damit ergeben sich außerdem verbesserte Aussagen zu Zusammensetzungen und Entstehungsprozessen der abgelagerten Sedimente. Die Studie verdeutlicht, dass die Sedimentherkunft innerhalb des Untersuchungsgebietes sowie die ablaufenden Prozesse zum Teil stark von lokalen Gegebenheiten abhängen. Die Heterogenität der Geologie und die Größe des Einzugsgebietes sowie die daraus resultierende Komplexität der Sedimentgenese, machen exakte Zuordnungen zu klar definierten Sedimentquellen sehr schwer. Dennoch zeigen die Ergebnisse, dass die Sedimentzufuhr in das Ejina-Becken in erster Linie durch fluviale klastische Sedimente des Heihe aus dem Qilian Shan erfolgt sein muss. Die Untersuchungsergebnisse zeigen jedoch ebenso die Notwendigkeit einer ergänzenden Bearbeitung angrenzender Untersuchungsgebiete, wie beispielsweise den Gobi-Altai im Norden oder den Beishan im Westen, sowie die Verdichtung der Oberflächenbeprobung zur feineren Auflösung von lokalen Sedimentquellen.
Quantitative Analysen magmatischer Gesteine mittels reflexionsspektroskopischer Infrarot-Messungen
(2004)
Das Wissen um die lokale Struktur von Seltenen Erden Elementen (SEE) in silikatischen und aluminosilikatischen Schmelzen ist von fundamentalem Interesse für die Geochemie der magmatischen Prozesse, speziell wenn es um ein umfassendes Verständnis der Verteilungsprozesse von SEE in magmatischen Systemen geht. Es ist allgemein akzeptiert, dass die SEE-Verteilungsprozesse von Temperatur, Druck, Sauerstofffugazität (im Fall von polyvalenten Kationen) und der Kristallchemie kontrolliert werden. Allerdings ist wenig über den Einfluss der Schmelzzusammensetzung selbst bekannt. Ziel dieser Arbeit ist, eine Beziehung zwischen der Variation der SEE-Verteilung mit der Schmelzzusammensetzung und der Koordinationschemie dieser SEE in der Schmelze zu schaffen.
Dazu wurden Schmelzzusammensetzungen von Prowatke und Klemme (2005), welche eine deutliche Änderung der Verteilungskoeffizienten zwischen Titanit und Schmelze ausschließlich als Funktion der Schmelzzusammensetzung zeigen, sowie haplogranitische bzw. haplobasaltische Schmelzzusammensetzungen als Vertreter magmatischer Systeme mit La, Gd, Yb und Y dotiert und als Glas synthetisiert. Die Schmelzen variierten systematisch im Aluminiumsättigungsindex (ASI), welcher bei den Prowatke und Klemme (2005) Zusammensetzungen einen Bereich von 0.115 bis 0.768, bei den haplogranitischen Zusammensetzungen einen Bereich von 0.935 bis 1.785 und bei den haplobasaltischen Zusammensetzungen einen Bereich von 0.368 bis 1.010 abdeckt. Zusätzlich wurden die haplogranitischen Zusammensetzungen mit 4 % H2O synthetisiert, um den Einfluss von Wasser auf die lokale Umgebung von SEE zu studieren. Um Informationen über die lokalen Struktur von Gd, Yb und Y zu erhalten wurde die Röntgenabsorptionsspektroskopie angewendet. Dabei liefert die Untersuchung der Feinstruktur mittels der EXAFS-Spektroskopie (engl. Extended X-Ray Absorption Fine Structure) quantitative Informationen über die lokale Umgebung, während RIXS (engl. resonant inelastic X-ray scattering), sowie die daraus extrahierte hoch aufgelöste Nahkantenstruktur, XANES (engl. X-ray absorption near edge structure) qualitative Informationen über mögliche Koordinationsänderungen von La, Gd und Yb in den Gläsern liefert. Um mögliche Unterschiede der lokalen Struktur oberhalb der Glastransformationstemperatur (TG) zur Raumtemperatur zu untersuchen, wurden exemplarisch Hochtemperatur Y-EXAFS Untersuchungen durchgeführt.
Für die Auswertung der EXAFS-Messungen wurde ein neu eingeführter Histogramm-Fit verwendet, der auch nicht-symmetrische bzw. nichtgaußförmige Paarverteilungsfunktionen beschreiben kann, wie sie bei einem hohen Grad der Polymerisierung bzw. bei hohen Temperaturen auftreten können. Die Y-EXAFS-Spektren für die Prowatke und Klemme (2005) Zusammensetzungen zeigen mit Zunahme des ASI, eine Zunahme der Asymmetrie und Breite der Y-O Paarverteilungsfunktion, welche sich in sich in der Änderung der Koordinationszahl von 6 nach 8 und einer Zunahme des Y-O Abstand um 0.13Å manifestiert. Ein ähnlicher Trend lässt sich auch für die Gd- und Yb-EXAFS-Spektren beobachten. Die hoch aufgelösten XANESSpektren für La, Gd und Yb zeigen, dass sich die strukturellen Unterschiede zumindest halb-quantitativ bestimmen lassen. Dies gilt insbesondere für Änderungen im mittleren Abstand zu den Sauerstoffatomen. Im Vergleich zur EXAFS-Spektroskopie liefert XANES jedoch keine Informationen über die Form und Breite von Paarverteilungsfunktionen. Die Hochtemperatur EXAFS-Untersuchungen von Y zeigen Änderungen der lokalen Struktur oberhalb der Glasübergangstemperatur an, welche sich vordergründig auf eine thermisch induzierte Erhöhung des mittleren Y-O Abstandes zurückführen lassen. Allerdings zeigt ein Vergleich der Y-O Abstände für Zusammensetzungen mit einem ASI von 0.115 bzw. 0.755, ermittelt bei Raumtemperatur und TG, dass der im Glas beobachtete strukturelle Unterschied entlang der Zusammensetzungsserie in der Schmelze noch stärker ausfallen kann, als bisher für die Gläser angenommen wurde.
Die direkte Korrelation der Verteilungsdaten von Prowatke und Klemme (2005) mit den strukturellen Änderungen der Schmelzen offenbart für Y eine lineare Korrelation, wohingegen Yb und Gd eine nicht lineare Beziehung zeigen. Aufgrund seines Ionenradius und seiner Ladung wird das 6-fach koordinierte SEE in den niedriger polymerisierten Schmelzen bevorzugt durch nicht-brückenbildende Sauerstoffatome koordiniert, um stabile Konfigurationen zu bilden. In den höher polymerisierten Schmelzen mit ASI-Werten in der Nähe von 1 ist 6-fache Koordination nicht möglich, da fast nur noch brückenbildende Sauerstoffatome zur Verfügung stehen. Die Überbindung von brückenbildenden Sauerstoffatomen um das SEE wird durch Erhöhung der Koordinationszahl und des mittleren SEE-O Abstandes ausgeglichen. Dies bedeutet eine energetisch günstigere Konfiguration in den stärker depolymerisierten Zusammensetzungen, aus welcher die beobachtete Variation des Verteilungskoeffizienten resultiert, welcher sich jedoch für jedes Element stark unterscheidet. Für die haplogranitischen und haplobasaltischen Zusammensetzungen wurde mit Zunahme der Polymerisierung auch eine Zunahme der Koordinationszahl und des durchschnittlichen Bindungsabstands, einhergehend mit der Zunahme der Schiefe und der Asymmetrie der Paarverteilungsfunktion, beobachtet. Dies impliziert, dass das jeweilige SEE mit Zunahme der Polymerisierung auch inkompatibler in diesen Zusammensetzungen wird. Weiterhin zeigt die Zugabe von Wasser, dass die Schmelzen depolymerisieren, was in einer symmetrischeren Paarverteilungsfunktion resultiert, wodurch die Kompatibilität wieder zunimmt.
Zusammenfassend zeigt sich, dass die Veränderungen der Schmelzzusammensetzungen in einer Änderung der Polymerisierung der Schmelzen resultieren, die dann einen signifikanten Einfluss auf die lokale Umgebung der SEE hat. Die strukturellen Änderungen lassen sich direkt mit Verteilungsdaten korrelieren, die Trends unterscheiden sich aber stark zwischen leichten, mittleren und schweren SEE. Allerdings konnte diese Studie zeigen, in welcher Größenordnung die Änderungen liegen müssen, um einen signifikanten Einfluss auf den Verteilungskoeffizenten zu haben. Weiterhin zeigt sich, dass der Einfluss der Schmelzzusammensetzung auf die Verteilung der Spurenelemente mit Zunahme der Polymerisierung steigt und daher nicht vernachlässigt werden darf.
Das Phänomen der Subduktion eines aktiven Spreizungszentrums an der Südspitze Südamerikas ist seit langem bekannt. Eine Vielzahl von geologischen Beobachtungen wurden mit diesem Phänomen in Verbindung gebracht, trotzdem ist der genaue Mechanismus der Beeinflussung des aktiven Kontinentalrandes weitgehend unbekannt. Die Zusammenhänge zwischen den Subduktionsprozessen und der Entwicklung der patagonischen Anden zwischen 47°S und 48°S stehen im Mittelpunkt der Untersuchungen. Um eine detaillierte zeitliche Auflösung der zugrunde liegenden Prozesse untersuchen zu können, wurde die Entwicklung der Vorlandsedimentation, die thermische Entwicklung und die Heraushebung der Oberkruste des andinen Orogens untersucht und diese in Bezug zur Subduktion des Chile-Rückens gesetzt. Im Bereich von 47°30′S wurden die synorogenen Vorlandsedimente der Santa Cruz Formation sedimentologisch untersucht. Diese fluviatilen Sedimente wurden in einem reliefarmen Vorlandgebiet durch häufige Rinnenverlagerung und dem Aufbau von Rinnenumlagerungsgürteln in Kombination mit assoziierten großräumigen Überflutungsablagerungen akkumuliert. Sie stehen in einem engen Zusammenhang mit der orogenen Entwicklung im andinen Liefergebiet. Dies spiegelt sich in dem nach oben gröber werdenden Zyklus der Santa Cruz Formation wider. Die magnetostratigraphischen Untersuchungen einer 270 m mächtigen Sequenz aus der Basis der Santa Cruz Formation, die mit 329 Einzelproben aus 96 Probenpunkten beprobt wurde, ergab 7 Umkehrungen der geomagnetischen Feldrichtung. Mit Hilfe der geomagnetischen Polaritätszeitskala (CANDE AND KENT, 1995) konnte der untersuchte Abschnitt der Santa Cruz Formation zwischen 16.2 und 18.5 Ma datiert werden. Als Träger der Sedimentations-Remanenz konnten überwiegend Pseudoeinbereichs-Magentitpartikel und untergeordnet Hämatitpartikel identifiziert werden. An drei Profilen der Santa Cruz Formation wurden aus Sandsteinlagen unterschiedlicher stratigraphischer Position detritische Apatite mit Hilfe der thermochronologischen Spaltspurmethode untersucht. Die thermisch nicht rückgesetzten, detritischen Apatite spiegeln das Auftreten unterschiedlicher Altersdomänen im Liefergebiet der Sedimente wider. In der Kombination mit den geochemischen Gesamtgesteinsuntersuchungen der Sedimente und den petrographischen Untersuchungen der Sandsteine, die ein überwiegend andesitisch-vulkanisch geprägtes Liefergebiet widerspiegeln, kann nachgewiesen werden, dass die Erosion im Liefergebiet um 16.5 Ma in tiefere, deformierte Krustensegmente einschneidet. Dies bedeutet, dass aufgrund der Denudation im andinen Orogen erste Sockelgesteinseinheiten in den Bereich der Abtragung gelangen und dass dieser Eintrag um 12 bis 10 Ma ein Volumen einnimmt, das zu signifikanten Änderungen der Gesamtgesteinsgeochemie der Vorlandsedimente führt. Die thermochronologische Untersuchung von Apatiten aus rezenten topographischen Höhenprofilen aus der Kernzone der patagonischen Anden im Bereich von 47°30′S zeigen den Beginn einer beschleunigten Heraushebung des Orogens um 7.5 Ma. Aus diesen Untersuchungen kann eine Denudationsrate im Zeitraum der letzen 7 bis 8 Ma von 600 bis 650 m/Ma abgeschätzt werden. Die Modellierung der Apatit-Spaltspurergebnisse zeigt eine signifikante Temperaturerhöhung im Zeitraum zwischen 12 und 8 Ma um 20 bis 30°C für diesen Krustenbereich, die mit der Subduktion des aktiven Chile-Rückens in diesem Bereich der Anden in Verbindung gebracht wird. Aus den gewonnen Daten kann ein Modell für die Entwicklung der patagonischen Anden seit dem frühen Miozän abgeleitet werden. In diesem Modell wird die orogene Entwicklung in den patagonischen Anden auf eine erhöhte Konvergenzrate zwischen der Nazca Platte und der Südamerikanischen Platte zurückgeführt, die für die Heraushebung und Denudation der Anden sowie für die damit verbundene Entwicklung im Vorlandbereich verantwortlich ist. Diese orogene Entwicklung wird in einer späten Phase durch die nordwärts wandernde Subduktion des aktiven Spreizungszentrums des Chile Rückens überprägt und beeinflusst. Das auf der Integration von geologischen, chronologischen sowie thermochronologischen Daten beruhende Modell kann zahlreiche geologische und geophysikalische Beobachtungen in diesem Bereich der südlichen Anden konsistent erklären.
Das Menderes Massiv im Westen der Türkei stellt eine große Kulmination metamorpher Gesteine dar. Das Untersuchungsgebiet ist im Zentralen Menderes Massiv (Ödemis Submassiv) gelegen, das von den beiden aktiven Gräben, dem Gediz Graben im Norden und dem Büyük Menderes Graben im Süden begrenzt wird. Die Untersuchungen der Eklogit Relikte im zentralen Menderes Massiv haben ergeben, dass sich im Menderes Massiv Hochdruckrelikte in unterschiedlichen tektonischen Positionen befinden. Zum einen existieren Eklogit-Blöcke in der obersten Einheit (Selcuk Einheit) des zentralen Menderes Massivs und zum anderen Hochdruck-Relikte in der strukturell mittleren Birgi - Tire Decke. Die Granate der quarzfreien Eklogit-Blöcke weisen große Ähnlichkeiten mit denen der HP/LT Gesteine von Sifnos und Syros auf. Die Entwicklung der Eklogit-Blöcke in der Olistostrom-Einheit lässt sich jedoch nicht mit den Eklogit Relikten in der strukturell mittleren Birgi Tire Decke vergleichen. Für die Eklogit-Relikte in der Birgi Tire Decke wurde eine polymetamorphe Entwicklung mithilfe petrologischer Untersuchungen und chemischen und Pb-Pb Datierungen herausgearbeitet. Die Eklogit Relikte gehören zu einem metamorphen Teilpfad, der durch eine Amphibolitfazies 1 - Hochdruck - Amphibolitfazies 2/Granulitfazies charakterisiert ist. Der Endpunkt dieses Teilpfades ist mit Temperaturen zwischen 700 und 750 °C und Drücken von 1.2 - 1.4 GPa belegt. Für diese Bedingungen konnte ein minimales Alter von 520 Ma durch chemische Datierungen an Monaziten einer Augengneisprobe und Pb-Pb Datierungen an Zirkonen einer Augengneis- und Metagabbroprobe bestimmt werden. Dieser amphibolit/granulitfazieller Endpunkt wird mit den Granitintrusionen des zentralen und südlichen Menderes Massiv korreliert, die in einem Zeitraum zwischen 520 Ma bis 550 Ma stattfanden. Sowohl die Amphibolitfazies 1 als auch das Hochdruckereignis werden der Panafrikanischen Orogenese zugeordnet. Für die Hochdruckbedingungen wurden maximale Temperaturen zwischen 680°C und 720°C und bei einem Druck von 2.2 GPa bestimmt. In den untersuchten Metasedimenten konnte eine prograde metamorphe Entwicklung abgeleitet werden, die amphibolitfazielle Bedingungen von 660°C bei 0.6 GPa erreichte. Das Metamorphosealter dieser Metasedimente konnte mit < 100 Ma mittels chemischer Mikrosondendatierung bestimmt werden. Die in den Metasedimenten herausgearbeiteten Druck- und Temperaturbedingungen wurden ebenfalls in den metabasischen Gesteinen bestimmt. Diese Ergebnisse werden als Krustenstapelung der metabasischen Gesteine, Augengneise und Metasedimente interpretiert, die mit der alpinen Orogenese im Zusammenhang stehen. Durch die Ergebnisse dieser Arbeit lässt sich die Birgi-Tire Decke im zentralen Menderes Massiv genauer charakterisieren. Sie besteht aus Metasedimenten, pelitischen Gneisen, Augengneisen und metabasichen Gesteinen. Die Gneise (pelitische und Augengneise) und die metabasischen Gesteine stellen panafrikanische Relikte dar, die einen amphibolit- eklogit- amphibolit/granulitfaziellen Metamorphosepfad gespeichert haben. Die amphibolit- bis granulitfazielle Metamorphose hängt mit den Granitintrusionen zusammen und fand in einem Zeitraum zwischen 520 - 550 Ma statt. Große Teile der Metasedimente der Birgi Tire Decke haben jedoch nur eine alpine metamorphe Entwicklung durchlaufen, wo sie unter amphibolitfazielle Bedingungen Krustentiefen erreichten, bei denen sie mit den panafrikanischen Relikten zusammen gestapelt wurden und eine gemeinsame Exhumierung erfahren haben.
In der vorliegenden Arbeit werden anhand der Edelgaszusammensetzung von Kimberliten und Lamproiten sowie ihrer gesteinsbildenden Minerale die Wechselwirkungen dieser Gesteine mit Fluiden diskutiert. Die untersuchten Proben stammen vom östlichen Baltischen Schild, vom Kola-Kraton (Poria Guba und Kandalaksha) und vom karelischen Kraton (Kostamuksha). Edelgasanalysen nach thermischer oder mechanischer Gasextraktion von 23 Gesamtgesteinsproben und 15 Mineralseparaten ergeben folgendes Bild: Helium- und Neon-Isotopendaten der Fluideinschlüsse von Lamproiten aus Kostamuksha lassen auf den Einfluss einer fluiden Phase krustaler Herkunft schliessen. Diese Wechselwirkungen fanden wahrscheinlich schon während des Magmenaufstiegs statt, denn spätere Einflüsse krustaler Fluide auf die Lamproite und ihr Nebengestein (Quarzit) sind gering, wie anhand der C/<sup>36Ar-Zusammensetzung gezeigt wird. Auch sind die mit verschiedenen Datierungsmethoden (Rb-Sr, Sm-Nd, K-Ar) an Mineralseparaten und teilweise an Gesamtgestein ermittelten Alter konsistent und machen eine metamorphe Überprägung unwahrscheinlich. Aufgrund der Verteilung der primordialen Edelgasisotope zwischen Fluideinschlüssen und Gesteinsmatrix ist ein langsamer Magmenaufstieg anzunehmen, was die Möglichkeit der Kontamination mit einem krustalen Fluid während des Magmenaufstiegs erhöht. Die Gasextraktion aus Mineralseparaten erfolgte thermisch, wodurch eine Freisetzung der Gase ausschließlich aus Fluideinschlüssen nicht möglich ist. Hierbei zeigen Amphibol und Klinopyroxen, separiert aus Kostamuksha-Lamproiten, in ihrer Neon-Isotopenzusammensetzung im Vergleich zur krustalen Zusammensetzung (Kennedy et al., 1990) ein leicht erhöhtes Verhältnis von <sup>20Ne/<sup>22Ne, was ein Hinweis auf Mantel-Neon sein könnte. Kalifeldspäte, Quarz und Karbonate enthalten dagegen nur Neon krustaler Zusammensetzung. Phlogopite haben sehr kleine Verhältnisse von <sup>20Ne/<sup>22Ne und <sup>21Ne/<sup>22Ne, zurückzuführen auf in-situ-Produktion von <sup>22Ne in Folge von U- und Th-Zerfallsprozessen. Wie unterschiedliche thermische Entgasungsmuster für <sup>40Ar und <sup>36Ar zeigen, ist <sup>36Ar in Fluideinschlüssen konzentriert. Das <sup>40Ar/<sup>36Ar-Isotopenverhältnis der Fluideinschlüsse von Lamproiten aus Kostamuksha ist antikorreliert mit der durch thermische Extraktion bestimmten Gesamtmenge an <sup>36Ar. Argon aus Fluideinschlüssen setzt sich daher aus zwei Komponenten zusammen: Einer Komponente mit atmosphärischer Argon-Isotopenzusammensetzung und einer krustalen Komponente mit einem Isotopenverhältnis <sup>40Ar/<sup>36Ar > 6000. Diffusion von radiogenem <sup>40Ar aus der Kristallmatrix in die Fluideinschlüsse spielt keine wesentliche Rolle. Kimberlite aus Poria Guba und Kandalaksha zeigen anhand der Helium- und z. T. auch der Neon-Isotopenzusammensetzung eine Mantelkomponente in den Fluideinschlüssen an. Bei einem angenommenen <sup>20Ne/<sup>22Ne-Isotopenverhältnis von 12,5 in der Mantelquelle ergibt sich ein <sup>21Ne/<sup>22Ne-Isotopenverhältnis von 0,073 ± 0,011 sowie ein <sup>3He/<sup>4He-Isotopenverhältnis, welches im Vergleich zum subkontinentalem Mantel (Dunai und Baur, 1995) stärker radiogen geprägt ist. Solche Isotopensignaturen sind mit höheren Konzentrationen an Uran und Thorium in der Mantelquelle der Kimberlite zu erklären. Rb-Sr- und Sm-Nd-Altersbestimmungen erfolgten von russischer Seite (Belyatskii et al., 1997; Nikitina et al., 1999) und ergeben ein Alter von 1,23 Ga für den Lamproitvulkanismus in Kostamuksha. Eigene K-Ar-Datierungen an Phlogopiten und Kalifeldspäten stimmen mit einem Alter von 1193 ± 20 Ma fast mit den Rb-Sr- und Sm-Nd-Altern überein. Die K-Ar-Datierung an einem Phlogopit aus Poria Guba, separiert aus dem Kimberlit PGK 12a, ergibt ein Alter von 396 Ma, ebenfalls in guter Übereinstimmung mit Rb-Sr-und Sm-Nd-Altern (ca. 400 Ma, Lokhov, pers. Mitteilung). K-Ar-Altersbestimmungen an Gesamtgestein aus Poria Guba erbrachten kein schlüssiges Alter. Die Rb-Sr- und Sm-Nd-Alter des Lamproitmagmatismus in Poria Guba betragen 1,72 Ga (Nikitina et al., 1999). Vergleiche von gemessenen mit berechneten Edelgaskonzentrationen aus in-situ-Produktion zeigen weiterhin, dass in Abhängigkeit vom Alter der Probe Diffusionsprozesse stattgefunden haben, die zu unterschiedlichen und z. T. erheblichen Verlusten an Helium und Neon führten. Diffusionsverluste an Argon sind dagegen kaum signifikant. Unterschiedliche Diffusionsverluste in Abhängigkeit von Alter und betrachtetem Edelgas zeigen auch die primordialen Edelgase.
Die zerstörungsfreien Prüfungen von Bauwerken mit Hilfe von Ultraschallmessverfahren haben in den letzten Jahren an Bedeutung gewonnen. Durch Ultraschallmessungen können die Geometrien von Bauteilen bestimmt sowie von außen nicht sichtbare Fehler wie Delaminationen und Kiesnester erkannt werden.
Mit neuartigen, in das Betonbauteil eingebetteten Ultraschallprüfköpfen sollen nun Bauwerke dauerhaft auf Veränderungen überprüft werden. Dazu werden Ultraschallsignale direkt im Inneren eines Bauteils erzeugt, was die Möglichkeiten der herkömmlichen Methoden der Bauwerksüberwachung wesentlich erweitert. Ein Ultraschallverfahren könnte mit eingebetteten Prüfköpfen ein Betonbauteil kontinuierlich integral überwachen und damit auch stetig fortschreitende Gefügeänderungen, wie beispielsweise Mikrorisse, registrieren.
Sicherheitsrelevante Bauteile, die nach dem Einbau für Messungen unzugänglich oder mittels Ultraschall, beispielsweise durch zusätzliche Beschichtungen der Oberfläche, nicht prüfbar sind, lassen sich mit eingebetteten Prüfköpfen überwachen. An bereits vorhandenen Bauwerken können die Ultraschallprüfköpfe mithilfe von Bohrlöchern und speziellem Verpressmörtel auch nachträglich in das Bauteil integriert werden. Für Fertigbauteile bieten sich eingebettete Prüfköpfe zur Herstellungskontrolle sowie zur Überwachung der Baudurchführung als Werkzeug der Qualitätssicherung an. Auch die schnelle Schadensanalyse eines Bauwerks nach Naturkatastrophen, wie beispielsweise einem Erdbeben oder einer Flut, ist denkbar.
Durch die gute Ankopplung ermöglichen diese neuartigen Prüfköpfe den Einsatz von empfindlichen Auswertungsmethoden, wie die Kreuzkorrelation, die Coda-Wellen-Interferometrie oder die Amplitudenauswertung, für die Signalanalyse. Bei regelmäßigen Messungen können somit sich anbahnende Schäden eines Bauwerks frühzeitig erkannt werden.
Da die Schädigung eines Bauwerks keine direkt messbare Größe darstellt, erfordert eine eindeutige Schadenserkennung in der Regel die Messung mehrerer physikalischer Größen die geeignet verknüpft werden. Physikalische Größen können sein: Ultraschalllaufzeit, Amplitude des Ultraschallsignals und Umgebungstemperatur. Dazu müssen Korrelationen zwischen dem Zustand des Bauwerks, den Umgebungsbedingungen und den Parametern des gemessenen Ultraschallsignals untersucht werden.
In dieser Arbeit werden die neuartigen Prüfköpfe vorgestellt. Es wird beschrieben, dass sie sich, sowohl in bereits errichtete Betonbauwerke als auch in der Konstruktion befindliche, einbauen lassen. Experimentell wird gezeigt, dass die Prüfköpfe in mehreren Ebenen eingebettet sein können da ihre Abstrahlcharakteristik im Beton nahezu ungerichtet ist. Die Mittenfrequenz von rund 62 kHz ermöglicht Abstände, je nach Betonart und SRV, von mindestens 3 m zwischen Prüfköpfen die als Sender und Empfänger arbeiten. Die Empfindlichkeit der eingebetteten Prüfköpfe gegenüber Veränderungen im Beton wird an Hand von zwei Laborexperimenten gezeigt, einem Drei-Punkt-Biegeversuch und einem Versuch zur Erzeugung von Frost-Tau-Wechsel Schäden. Die Ergebnisse werden mit anderen zerstörungsfreien Prüfverfahren verglichen. Es zeigt sich, dass die Prüfköpfe durch die Anwendung empfindlicher Auswertemethoden, auftretende Risse im Beton detektieren, bevor diese eine Gefahr für das Bauwerk darstellen. Abschließend werden Beispiele von Installation der neuartigen Ultraschallprüfköpfe in realen Bauteilen, zwei Brücken und einem Fundament, gezeigt und basierend auf dort gewonnenen ersten Erfahrungen ein Konzept für die Umsetzung einer Langzeitüberwachung aufgestellt.
Das Ziel dieser Arbeit ist es, die Strukturen im äußeren Erdkern zu untersuchen und Rückschlüsse auf die sich daraus ergebenden Konsequenzen für geodynamische Modellvorstellungen zu ziehen. Die Untersuchung der Kernphasenkaustik B mit Hilfe einer kumulierten Amplituden-Entfernungskurve ist Gegenstand des ersten Teils. Dazu werden die absoluten Amplituden der PKP-Phasen im Entfernungsbereich von 142 ° bis 147 ° bestimmt und mit den Amplituden synthetischer Seismogramme verglichen. Als Datenmaterial dienen die Breitbandregistrierungen des Deutschen Seismologischen Re-gionalnetzes (GRSN 1 ) und des Arrays Gräfenberg (GRF). Die verwendeten Wellen-formen werden im WWSSN-SP-Frequenzbereich gefiltert. Als Datenbasis dienen vier Tiefherdbeben der Subduktionszone der Neuen Hebriden (Vanuatu Island) und vier Nuklearexplosionen, die auf dem Mururoa und Fangataufa Atoll im Südpazifik stattgefunden haben. Beide Regionen befinden sich vom Regionalnetz aus gesehen in einer Epizentraldistanz von ungefähr 145 °. Die Verwendung eines homogen instrumentierten Netzes von Detektoren und die Anwendung von Stations- und Magnitudenkorrekturen verringern den Hauptteil der Streuung bei den Amplitudenwerten. Dies gilt auch im Vergleich zu Untersuchungen von langperiodischen Amplituden im Bereich der Kernphasenkaustik (Häge, 1981). Ein weiterer Grund für die geringe Streuung ist die ausschließliche Verwendung von Ereignissen mit kurzer impulsiver Herdzeitfunktion. Erst die geringe Streuung der Amplitudenwerte ermöglicht eine Interpretation der Daten. Die theoretischen Amplitudenkurven der untersuchten Erdmodelle zeigen im Bereich der Kaustik B einen gleichartigen Kurvenverlauf. Bei allen Berechnungen wird ein einheitliches Modell für die Güte der P- und S-Wellen verwendet, das sich aus den Q-Werten der Modelle CIT112 und PREM 2 zusammensetzt. Die mit diesem Q-Modell berechneten Amplituden liegen in geringem Maße oberhalb der gemessenen Amplituden. Dies braucht nicht berücksichtigt zu werden, da die kumulierte Amplituden-Entfernungskurve anhand der Lage des Maximums auf der Entfernungsachse ausgewertet wird. Folglich wird darauf verzichtet, ein alternatives Q-Modell zu entwickeln. Hinsichtlich der Lage des Kaustikmaximums lassen sich die untersuchten Erdmodelle in zwei Kategorien einteilen. Eine Gruppe besteht aus den Modellen IASP91 und 1066B, deren Maxima bei 144.6 ° und 144.7 ° liegen. Zur zweiten Gruppe von Modellen zählen AK135, PREM und SP6 mit den Maxima bei 145.1 ° und 145.2 ° (SP6). Die gemessene Amplitudenkurve hat ihr Maximum bei 145 °. Alle Entfernungsangaben beziehen sich auf eine Herdtiefe von 200 km. Die Kaustikentfernung für einen Oberflächenherd ist jeweils um 0.454 ° größer als die angegeben Werte. Damit liegen die Maxima der Modelle AK135 und PREM nur 0.1 ° neben dem der gemessenen kumulierten Amplitudenkurve. Daher wird auf die Erstellung eines eigenen Modells verzichtet, da dieses eine unwesentlich verbesserte Amplitudenkurve aufweisen würde. Das Ergebnis der Untersuchung ist die Erstellung einer gemessenen kumulierten Amplituden-Entfernungskurve für die Kaustik B. Die Kurve legt die Position der Kaustik B für kurzperiodische Daten auf ± 0.15 ° fest und bestimmt damit, welche Erdmodelle für die Beschreibung der Amplituden im Entfernungsbereich der Kaustik B besonders geeignet sind. Die Erdmodelle AK135 und PREM, ergänzt durch ein einheitliches Q-Modell, geben den Verlauf der Amplituden am besten wieder. Da die Amplitudenkurven beider Modelle nahe beieinander liegen, sind sie als gleichwertig zu bezeichnen. Im zweiten Teil der Arbeit wird die Struktur der Übergangszone in den inneren Erdkern anhand des spektralen Abklingens der Phase PKP(BC)diff am Punkt C der Laufzeitkurve untersucht. Der physikalische Prozeß der Beugung ist für die starke Abnahme der Amplituden dieser Phase verantwortlich. Die Diffraktion beeinflußt das Abklingverhalten verschiedener Frequenzanteile des seismischen Signals auf unterschiedliche Weise. Eine Deutung des Verhaltens erfordert die Berechnung von Abklingspektren. Dabei wird die Abschwächung des PKP(BC)diff Signals für acht Frequenzen zwischen 6.4 s und 1.25 Hz ermittelt und als Spektrum dargestellt. Die Form des Abklingspektrums ist charakteristisch für die Beschaffenheit der Geschwindigkeitsstruktur direkt oberhalb der Grenze zum inneren Erdkern (GIK). Die Beben, deren Kernphasen im Regionalnetz als diffraktierte Kernphasen BCdiff registriert werden, liegen in einem Entfernungsbereich jenseits von 150 °. In dieser Distanz befinden sich die Erdbebenherde der Tonga-Fidschi-Subduktionszone, deren Breitbandaufzeichnungen verwendet werden. Die Auswertung unkorrigierter Wellenformen ergibt Abklingspektren, die mit plausiblen Erdmodellen nicht in Einklang zu bringen sind. Aus diesem Grund werden die Daten einer spektralen Stationskorrektur unterzogen, die eigens zu diesem Zweck ermittelt wird. Am Beginn der Auswertung steht eine Prüfung bekannter Erdmodelle mit unterschiedlichen Geschwindigkeitsstrukturen oberhalb der GIK. Zu den untersuchten Modellen zählen PREM, IASP91, AK135Q, PREM2, SP6, OICM2 und eine Variante des PREM. Die Untersuchung ergibt, daß Modelle, die einen verringerten Gradienten oberhalb der GIK aufweisen, eine bessere Übereinstimmung mit den gemessenen Daten zeigen als Modelle ohne diese Übergangszone. Zur Verifikation dieser These wird ein Erdmodell, das keinen verringerten Gradienten oberhalb der GIK besitzt (PREM), durch eine Reihe unterschiedlicher Geschwindigkeitsverläufe in diesem Bereich ergänzt und deren synthetische Seismogramme berechnet. Das Resultat der Untersuchung sind zwei Varianten des PREM, deren Frequenzanalyse eine gute Übereinstimmung mit den Daten zeigt. Das Abklingspektrum des Erdmodells PD47, das in einer 380 km mächtigen Schicht einen negativen Gradienten besitzt, zeigt eine große Ähnlichkeit mit den gemessenen Spektren. Dennoch kann es nicht als realistisches Modell angesehen werden, da der Punkt C in einer zu großen Entfernung liegt. Darüber hinaus müßte die zu kurze Differenzlaufzeit zwischen PKP(AB) und PKP(DF) beziehungsweise PKIKP durch eine größere Änderung der Geschwindigkeitsstruktur im inneren Kern kompensiert werden. Es wird deshalb das Modell PD27a favorisiert, das diese Nachteile nicht aufweist. PD27a besitzt eine Schicht konstanter Geschwindigkeit oberhalb der GIK mit einer Mächtigkeit von 150 km. Die Art des Geschwindigkeitsverlaufs steht im Einklang mit der geodynamischen Modellvorstellung, nach der eine Anreicherung leichter Elemente oberhalb der GIK vorliegt, die als Ursache für die Konvektion im äußeren Erdkern anzusehen ist.