Refine
Has Fulltext
- yes (3)
Year of publication
- 2004 (3)
Document Type
Language
- German (3) (remove)
Is part of the Bibliography
- yes (3)
Keywords
- anisotropy (3) (remove)
Institute
Gegenstand der Arbeit ist die lichtinduzierte Orientierung von multifunktionalen Polymeren, die u.a. für die Herstellung von optischen Schichten in Flüssigkristalldisplays verwendet werden können. Dafür wurden Polymere entwickelt, die wenigstens eine mesogene und eine lichtsensitive Gruppe enthalten. Diese Gruppen zeigen Eigenschaften, die für die Orientierung der kompletten Polymerfilme verantwortlich sind. Das Material wird dafür zunächst in einem ersten Schritt kurz mit linear polarisiertem Licht bestrahlt, wobei richtungsabhängig eine photochemische Reaktion an der lichtsensitiven Gruppe erfolgt und dadurch ein "Orientierungskeim" gelegt wird. Durch die thermische Ausrichtung der mesogenen Gruppen an den photochemisch generierten "Orientierungskeimen" erfolgt die komplette Orientierung des Filmes in einem zweiten Schritt. Dadurch wird eine hohe optische Anisotropie erhalten. Dieses Verfahren wurde als Zwei-Stufen-Bulk-Orientierungsprozess bezeichnet. In der vorliegenden Arbeit wurden die Photoreaktionen verschiedener lichtsensitiver Gruppen, wie z. B. Azobenzen, Stilben und Zimtsäureester und deren Orientierungsfähigkeit in flüssigkristallinen Polymeren untersucht. Der Orientierungsprozess wurde durch die Wahl geeigneter Bestrahlungsbedingungen optimiert. Die Effizienz der Orientierung wurde anhand der sich verändernden winkelabhängigen Absorptionseigenschaften und der Doppelbrechung des Materials analysiert. Es wurde gezeigt, dass eine effiziente lichtinduzierte Orientierung bei einer Vielzahl von flüssigkristallinen Polymeren realisierbar ist. So wurde z. B. erstmalig gefunden, dass durch eine Photo-Fries-Orientierung eine hohe optische Anisotropie erhalten werden kann. Außerdem wurde eine neue lichtsensitive Gruppe auf der Basis von Donor-Akzeptor-substituiertem Ethen entwickelt, die farbneutral ist und durch polarisiertes UV-Licht sowohl orientiert als auch re-orientiert werden kann. Es wurden weiterhin Polymere entwickelt, die zusätzlich zu den photosensitiven und flüssigkristallinen Einheiten, fluoreszierende Gruppen enthalten. Die Auswahl geeigneter Fluoreszenzverbindungen erfolgte aufgrund ihrer anisometrischen Form, ihrer Ordnungsparameter in einer niedermolekularen Flüssigkristallmischung und ihrer Photostabilität. Das Orientierungsverhalten von ausgewählten Fluorophoren wurde in sechs Ter- und zwei Copolymeren untersucht. Das Prinzip der Orientierung beruht auf einer kooperativen Ausrichtung der Seitengruppen. Aus diesem Grund kommt dem Nachweis der Kooperativität in der vorliegenden Arbeit eine besondere Stellung zu. Durch lichtinduzierte Bulk-Orientierung wurden Filme erhalten, welche durch eine richtungsabhängige Fluoreszenz und Absorption im sichtbaren- oder UV-Bereich charakterisiert sind. Die Fluoreszenz wird durch einige lichtsensitive Verbindungen komplett gelöscht. Die wahlweise erhaltenen anisotropen Filme von farbigen, fluoreszierenden oder farbneutralen Verbindungen, die zudem in kleinen Pixeln von wenigen Mikrometern orientiert werden können, eröffnen vielfältige Möglichkeiten für den Einsatz von multi-funktionalen Polymeren als optische Schichten in Flüssigkristalldisplays.
Eine Nutzung der optischen Anisotropie dünner Schichten ist vor allem für die Displaytechnologie, die optische Datenspeicherung und für optische Sicherheitselemente von hoher Bedeutung. Diese Doktorarbeit befasst sich mit theoretischen und experimentellen Untersuchung von dreidimensionaler Anisotropie und dabei insbesondere mit der Untersuchung von lichtinduzierter dreidimensionaler Anisotropie in organischen dünnen Polymer-Schichten. Die gewonnenen Erkentnisse und entwickelten Methoden können wertvolle Beiträge für Optimierungsprozesse, wie bei der Kompensation der Blickwinkelabhängigkeit von Flüssigkristall-Displays, liefern. Die neue Methode der Immersions-Transmissions-Ellipsometrie (ITE) zur Untersuchung von dünneren Schichten wurde im Rahmen dieser Dissertation entwickelt. Diese Methode gestattet es, in Kombination mit konventioneller Reflexions- und Transmissionsellipsometrie, die absoluten dreidimensionalen Brechungsindices einer biaxialen Schicht zu bestimmen. Erstmals gelang es damit, das dreidimensionale Brechungsindexellipsoid von transparenten, dünneren (150 nm) Filmen hochgenau (drei Stellen hinter dem Komma) zu bestimmen. Die ITE-Methode hat demzufolge das Potential, auch bei noch dünneren Schichten mit Gewinn eingesetzt werden zu können. Die lichtinduzierte Generierung von dreidimensionaler Anisotropie wurde in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen, amorphen und flüssig-kristallinen Homo- und Copolymeren untersucht. Erstmals wurden quantitative Untersuchungen zur Änderung von lichtinduzierten, dreidimensionalen Anisotropien in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen Polymeren bei Tempern oberhalb der Glastemperatur durchgeführt. Bei vielen der untersuchten Polymere war die dreidimensionale Ordnung nach dem Bestrahlen mit polarisiertem Licht und anschließendem Tempern oberhalb der Glastemperatur scheinbar von der Schichtdicke abhängig. Die Ursache liegt wohl in der, mit der neuentwickelten ITE-Methode detektierten, planaren Ausgangsorientierung der aufgeschleuderten dünneren Schichten. Um Verkippungs-Gradienten in dickeren Polymerschichten in ihrem Verlauf zu bestimmen, wurde eine spezielle Methode unter Benutzung der Wellenleitermoden-Spektroskopie entwickelt. Quantenchemisch bestimmte, maximal induzierbare Doppelbrechungen in flüssig-kristallinen Polymeren wurden mit den experimentell gefundenen Ordnungen verglichen.
Eine Nutzung der optischen Anisotropie dünner Schichten ist vor allem für die Displaytechnologie, die optische Datenspeicherung und für optische Sicherheitselemente von hoher Bedeutung. Diese Doktorarbeit befasst sich mit theoretischen und experimentellen Untersuchung von dreidimensionaler Anisotropie und dabei insbesondere mit der Untersuchung von lichtinduzierter dreidimensionaler Anisotropie in organischen dünnen Polymer-Schichten. Die gewonnenen Erkentnisse und entwickelten Methoden können wertvolle Beiträge für Optimierungsprozesse, wie bei der Kompensation der Blickwinkelabhängigkeit von Flüssigkristall-Displays, liefern. Die neue Methode der Immersions-Transmissions-Ellipsometrie (ITE) zur Untersuchung von dünneren Schichten wurde im Rahmen dieser Dissertation entwickelt. Diese Methode gestattet es, in Kombination mit konventioneller Reflexions- und Transmissionsellipsometrie, die absoluten dreidimensionalen Brechungsindices einer biaxialen Schicht zu bestimmen. Erstmals gelang es damit, das dreidimensionale Brechungsindexellipsoid von transparenten, dünneren (150 nm) Filmen hochgenau (drei Stellen hinter dem Komma) zu bestimmen. Die ITE-Methode hat demzufolge das Potential, auch bei noch dünneren Schichten mit Gewinn eingesetzt werden zu können. Die lichtinduzierte Generierung von dreidimensionaler Anisotropie wurde in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen, amorphen und flüssig-kristallinen Homo- und Copolymeren untersucht. Erstmals wurden quantitative Untersuchungen zur Änderung von lichtinduzierten, dreidimensionalen Anisotropien in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen Polymeren bei Tempern oberhalb der Glastemperatur durchgeführt. Bei vielen der untersuchten Polymere war die dreidimensionale Ordnung nach dem Bestrahlen mit polarisiertem Licht und anschließendem Tempern oberhalb der Glastemperatur scheinbar von der Schichtdicke abhängig. Die Ursache liegt wohl in der, mit der neuentwickelten ITE-Methode detektierten, planaren Ausgangsorientierung der aufgeschleuderten dünneren Schichten. Um Verkippungs-Gradienten in dickeren Polymerschichten in ihrem Verlauf zu bestimmen, wurde eine spezielle Methode unter Benutzung der Wellenleitermoden-Spektroskopie entwickelt. Quantenchemisch bestimmte, maximal induzierbare Doppelbrechungen in flüssig-kristallinen Polymeren wurden mit den experimentell gefundenen Ordnungen verglichen.