Refine
Has Fulltext
- no (99)
Year of publication
- 2013 (99) (remove)
Document Type
- Article (99) (remove)
Is part of the Bibliography
- yes (99)
Keywords
- Crystal structure (2)
- DFT calculations (2)
- Density functional calculations (2)
- Hydrogel (2)
- ICSS (2)
- Ion mobility spectrometry (2)
- Mass spectrometry (2)
- Push-pull character (2)
- REMPI (2)
- TSNMRS (2)
Institute
- Institut für Chemie (99) (remove)
Thin thermoresponsive films of the triblock copolymer polystyrene-block-poly(methoxydiethylene glycol acrylate)-block-polystyrene (P(S-b-MDEGA-b-S)) are investigated on silicon substrates. By spin coating, homogeneous and smooth films are prepared for a range of film thicknesses from 6 to 82 nm. Films are stable with respect to dewetting as investigated with optical microscopy and atomic force microscopy. P(S-b-MDEGA-b-S) films with a thickness of 39 nm exhibit a phase transition of the lower critical solution temperature (LCST) type at 36.5 degrees C. The swelling and the thermoresponsive behavior of the films with respect to a sudden thermal stimulus are probed with in-situ neutron reflectivity. In undersaturated water vapor swelling proceeds without thickness increase. The thermoresponse proceeds in three steps: First, the film rejects water as the temperature is above LCST. Next, it stays constant for 600 s, before the collapsed film takes up water again. With ATR-FTIR measurements, changes of bound water in the film caused by different thermal stimuli are studied. Hydrogen bonds only form between C=O and water in the swollen film. Above the LCST most hydrogen bonds with water are broken, but some amount of bound water remains inside the film in agreement with the neutron reflectivity data. Grazing-incidence small-angle X-ray scattering (GISAXS) shows that the inner lateral structure is not significantly influenced by the different thermal stimuli.
Thick poly(styrene-b-monomethoxydiethylenglycol-acrylate-b-styrene) [P(S-b-MDEGA-b-S)] films (thickness 5 mu m) are prepared from different solvents on flexible substrates by solution casting and investigated with small-angle X-ray scattering. As the solvents are either PS- or PMDEGA-selective, micelles with different core-shell micellar structures are formed. In PMDEGA-selective solvents, the PS block is the core and PMDEGA is the shell, whereas in PS-selective solvents, the order is reversed. After exposing the films to liquid D2O, the micellar structure inside the films prepared from PMDEGA-selective solvents remains unchanged and only the PMDEGA (shell part) swells. On the contrary, in the films prepared from PS-selective solvents, the micelles revert the core and the shell. This reversal causes more entanglements of the PMDEGA chains between the micelles. Moreover, the thermal collapse transition of the PMDEGA block in liquid D2O is significantly broadened. Irrespective of the solvent used for film preparation, the swollen PMDEGA shell does not show a prominent shrinkage when passing the phase transition, and the transition process occurs via compaction. The collapsed micelles have a tendency to densely pack above the transition temperature.
An asymmetric variant of the dehydro-Diels-Alder (DDA) reaction has been developed and applied in the atropselective synthesis of various (1,5)naphthalenophanes. Whereas the suitability of the photochemically induced DDA (PDDA) was limited, the thermally induced DDA provided the desired product, depending on the chiral auxiliary used and the length of the linker, with nearly perfect stereoselectivity. Furthermore, the mechanism of the DDA was investigated by means of DFT calculations, and a stepwise mechanism involving 1,4-biradicals was suggested.
Various 1,6- and 1,8-naphthalenophanes were synthesized by using the Photo-Dehydro-Diels-Alder (PDDA) reaction of bis-ynones. These compounds are easily accessible from omega-(3-iodophenyl)carboxylic acids in three steps. The obtained naphthalenophanes are axially chiral and the activation barrier for the atropisomerization could be determined in some cases by means of dynamic NMR (DNMR) and/or dynamic HPLC (DHPLC) experiments.
Two synthetic approaches to functionalize plant oil derived platform chemicals were investigated. For this purpose, methyl 10-undecenoate, which can be obtained by pyrolysis of castor oil, was used in olefin cross-metathesis under neat conditions forming an unsaturated a,?-acetoxy ester. A catalyst screening with 11 different ruthenium-based metathesis catalysts was performed, revealing that well-suited catalysts allow for full conversion and very good cross-metathesis selectivity at a loading of only 0.5?mol%. An alternative possibility to the aforementioned synthetic method is a palladium-catalyzed reaction of methyl 10-undecenoate with acetic acid in the presence of dimethyl sulfoxide. Here, the formation of linear and branched unsaturated acetoxy esters as well as a ketone was observed. The conversion as well as the selectivity of this procedure was studied under different reaction conditions and compared to the cross-metathesis results. Based on the successful functionalization of methyl 10-undecenoate, methyl oleate was investigated in this palladium-catalyzed C?H activation reaction. Due to the lower reactivity of the internal double bond the desired acetoxy ester was only obtained in moderate conversion in this case. In summary, this study clearly shows that palladium-catalyzed functionalization of unsaturated fatty compounds via C?H activation is an attractive alternative to the well-established olefin cross-metathesis procedure.
Transcriptome analysis through next-generation sequencing technologies allows the generation of detailed gene catalogs for non-model species, at the cost of new challenges with regards to computational requirements and bioinformatics expertise. Here, we present TRAPID, an online tool for the fast and efficient processing of assembled RNA-Seq transcriptome data, developed to mitigate these challenges. TRAPID offers high-throughput open reading frame detection, frameshift correction and includes a functional, comparative and phylogenetic toolbox, making use of 175 reference proteomes. Benchmarking and comparison against state-of-the-art transcript analysis tools reveals the efficiency and unique features of the TRAPID system.
A new sulfonated aniline-modified poly(vinyl alcohol)/K-feldspar (SAPK) composite was prepared. The cation-exchange capacity of the composite was found to be S times that of neat feldspar. The specific surface area and point of zero charge also changed significantly upon modification, from 15.6 +/- 0.1 m(2)/g and 2.20 (K-feldspar) to 73.6 +/- 0.3 m(2)/g and 1.91 (SAPK). Zn2+, Cd2+, and Pb2+ adsorption was found to be largely independent of pH, and the metal adsorption rate on SAPK was higher than that on neat feldspar. This particularly applies to the initial adsorption rates. The adsorption process involves both film and pore diffusion; film diffusion initially controls the adsorption. The Freundlich and Langmuir models were found to fit metal-ion adsorption on SAPK most accurately. Adsorption on neat feldspar was best fitted with a Langmuir model, indicating the formation of adsorbate monolayers. Both pure feldspar and SAPK showed better selectivity for Pb2+ than for Cd2+ or Zn2+.
New hybrid clay adsorbent based on kaolinite clay and Carica papaya seeds with improved cation exchange capacity (CEC), rate of heavy metal ion uptake, and adsorption capacity for heavy metal ions were prepared. The CEC of the new material is ca. 75 meq/100 g in spite of the unexpectedly low surface area (approximate to 19 m(2)/g). Accordingly, the average particle size of the hybrid clay adsorbent decreased from over 200 to 100 pm. The hybrid clay adsorbent is a highly efficient adsorbent for heavy metals. With an initial metal concentration of 1 mg/L, the hybrid clay adsorbent reduces the Cd2+, Ni2+, and Pb2+ concentration in aqueous solution to <= 4, <= 7 and <= 20 mu g/L, respectively, from the first minute to over 300 min using a fixed bed containing 2 g of adsorbent and a flow rate of approximate to 7 mL/min. These values are (with the exception of Pb2+) in line with the WHO permissible limits for heavy metal ions. In a cocktail solution of Cd2+, and Ni2+, the hybrid clay shows a reduced rate of uptake but an increased adsorption capacity. The CEC data suggest that the adsorption of Pb2+, Cd2+, and Ni2+ on the hybrid clay adsorbent is essentially due to ion exchange. This hybrid clay adsorbent is prepared from materials that are abundant and by a simple means that is sustainable, easily recovered from aqueous solution, nonbiodegradable (unlike numerous biosorbent), and easily regenerated and is a highly efficient alternative to activated carbon for water treatment.
A new class of star-shaped, liquid crystalline, low-molecular weight compounds functionalized with photochromic azobenzene and mesogenic groups was investigated in terms of light-induced anisotropy. The behaviour of the materials under the action of light with simultaneous or subsequent thermal treatment was examined with respect to the induction of anisotropy. The unconventional UV light treatment prior to the irradiation with linearly polarized light allowed induction of very high values of anisotropy (D = 0.77) at room temperature. Moreover, the simultaneous action of light and temperature led to the induction of higher values of dichroism in comparison with anisotropy generated by the standard procedure. Subsequent thermal treatment led to dewetting and the formation of 3D macroscopic stripe- and dome-like structures for one of the investigated compounds. Despite photoinduction of anisotropy by a single beam, the formation of polarization and surface relief gratings by two-beam interference pattern was also investigated.
A polymer analogous reaction for the formation of imidazolium and NHC based porous polymer networks
(2013)
A polymer analogous reaction was carried out to generate a porous polymeric network with N-heterocyclic carbenes (NHC) in the polymer backbone. Using a stepwise approach, first a polyimine network is formed by polymerization of the tetrafunctional amine tetrakis(4-aminophenyl)methane. This polyimine network is converted in the second step into polyimidazolium chloride and finally to a polyNHC network. Furthermore a porous Cu(II)-coordinated polyNHC network can be generated. Supercritical drying generates polymer networks with high permanent surface areas and porosities which can be applied for different catalytic reactions. The catalytic properties were demonstrated for example in the activation of CO2 or in the deoxygenation of sulfoxides to the corresponding sulfides.
A polymer analogous reaction for the formation of imidazolium and NHC based porous polymer networks
(2013)
A polymer analogous reaction was carried out to generate a porous polymeric network with N-heterocyclic carbenes (NHC) in the polymer backbone. Using a stepwise approach, first a polyimine network is formed by polymerization of the tetrafunctional amine tetrakis(4-aminophenyl)methane. This polyimine network is converted in the second step into polyimidazolium chloride and finally to a polyNHC network. Furthermore a porous Cu(II)-coordinated polyNHC network can be generated. Supercritical drying generates polymer networks with high permanent surface areas and porosities which can be applied for different catalytic reactions. The catalytic properties were demonstrated for example in the activation of CO2 or in the deoxygenation of sulfoxides to the corresponding sulfides.
Silver nanoparticles (SNP) are among the most commercialized nanoparticles. Here, we show that peptide-coated SNP cause functional impairment of human macrophages. A dose-dependent inhibition of phagocytosis is observed after nanoparticle treatment, and pretreatment of cells with N-acetyl cysteine (NAC) can counteract the phagocytosis disturbances caused by SNP.
Using the surface-sensitive mode of time-of-flight secondary ion mass spectrometry, in combination with multivariate statistical methods, we studied the composition of cell membranes in human macrophages upon exposure to SNP with and without NAC preconditioning. This method revealed characteristic changes in the lipid pattern of the cellular membrane outer leaflet in those cells challenged by SNP. Statistical analyses resulted in 19 characteristic ions, which can be used to distinguish between NAC pretreated and untreated macrophages. The present study discusses the assignments of surface cell membrane phospholipids for the identified ions and the resulting changes in the phospholipid pattern of treated cells. We conclude that the adverse effects in human macrophages caused by SNP can be partially reversed through NAC administration. Some alterations, however, remained.
Fluorescence probes consisting of well-established fluorophores in combination with rigid molecular rods based on spirane-type structures were investigated with respect to their fluorescence properties under different solvent conditions. The attachment of the dyes was accomplished by 1,3-dipolar cycloaddition between alkynes and azides (click' reaction) and is a prime example for a novel class of sensor constructs. Especially, the attachment of two (different) fluorophores on opposite sides of the molecular rods paves the way to new sensor systems with less bulky (compared to the conventional DNA- or protein-based concepts), nevertheless rigid spacer constructs, e.g., for FRET-based sensing applications. A detailed photophysical characterization was performed in MeOH (and in basic H2O/MeOH mixtures) for i) rod constructs containing carboxyfluorescein, ii) rod constructs containing carboxyrhodamine, iii) rod constructs containing both carboxyfluorescein and carboxyrhodamine, and iv) rod constructs containing both pyrene and perylene parts. For each dye (pair), two rod lengths with different numbers of spirane units were synthesized and investigated. The rod constructs were characterized in ensemble as well as single-molecule fluorescence experiments with respect to i) specific roddye and ii) dyedye interactions. In addition to MeOH and MeOH/NaOH, the rod constructs were also investigated in micellar systems, which were chosen as a simplified model for membranes.
Through the reactions of 1-aminomethyl-2-naphthol and substituted 1-aminobenzyl-2-naphthols with 3,4-dihydroisoquinoline or 6,7-dimethoxy-3,4-dihydroisoquinoline under microwave conditions, naphth[1,2-e][1,3]oxazino[2,3-a]-isoquinoline derivatives were prepared in good yields. The latter reaction was extended by using 2-aminoarylmethyl-1-naphthols, leading to isomeric naphth-[2,1-e][1,3]oxazino[2,3-a] isoquinolines. Beside the detailed NMR spectroscopic and theoretical study of both stereochemistry and dynamic behaviour of these new conformational flexible heterocyclic ring systems an unexpected dynamic process between two diastereomers was observed in solution, studied by variable temperature H-1 NMR spectroscopy and the mechanism proved by theoretical DFT computations.
Here we report a new and simple synthetic pathway to form ordered, hollow carbon nitride structures, using a cyanuric acid melamine (CM) complex in ethanol as a starting product. A detailed analysis of the optical and photocatalytic properties shows that optimum hollow carbon nitride structures are formed after 8 h of condensation. For this condensation time, we find a significantly reduced fluorescence intensity and lifetime, indicating the formation of new, nonradiative deactivation pathways, probably involving charge-transfer processes. Enhanced charge transfer is seen as well from a drastic increase of the photocatalytic activity in the degradation of rhodamine B dye, which is shown to proceed via photoinduced hole transfer. Moreover, we show that various CM morphologies can be obtained using different solvents, which leads to diverse ordered carbon nitride architectures. In all cases, the CM-C3N4 structures exhibited superior photocatalytic activity compared to the bulk material. The utilization of CM hydrogen-bonded complexes opens new opportunities for the significant improvement of carbon nitride synthesis, structure, and optical properties toward an efficient photoactive material for catalysis.
Silacyclohexanes and silaheterocyclohexanes-why are they so different from other heterocyclohexanes?
(2013)
Stereochemical studies on silaheterocyclohexanes is a 'hot topic' as evidenced by the growing number of publications. During last 10 years a substantial number of substituted silacyclohexanes and heterocyclohexanes containing sulfur, oxygen or nitrogen as the second (or third) heteroatom have been synthesized and studied by variable temperature dynamic NMR spectroscopy, gas-phase electron diffraction, variable temperature IR, Raman, microwave spectroscopy with respect to thermodynamic (frozen conformational equilibria) and kinetic (barrier to ring inversion) information. As the stereochemistry of cyclohexane and its N-, O-, P-, S-hetero analogues is one of keystones of modern theoretical and synthetic organic and heterocyclic chemistry, the stereochemistry of silacyclohexane and its hetero analogs is an important element of theoretical and synthetic organosilicon chemistry. The various classes of saturated six-membered rings were critically compared and studied in detail with respect to differences in their stereochemistry and dynamic behavior.
The first Si-H-containing azasilaheterocycle, 1,3-dimethyl-3-silapiperidine 1, was synthesized, and its molecular structure and conformational properties were studied by gas-phase electron diffraction (GED), low temperature NMR, IR and Raman spectroscopy and quantum chemical calculations. The compound exists as a mixture of two conformers possessing the chair conformation with the equatorial NMe group and differing by axial or equatorial position of the SiMe group. In the gas phase, the SiMeax conformer predominates (GED: ax/eq = 65(7):35(7)%,Delta G = 0.36(18) kcal/mol; IR: ax/eq = 62(5):38(5)%,Delta G = 0.16(7) kcal/mol). In solution, at 143 k the SiMeeq conformer predominates' in the frozen equilibrium (NMR: ax/eq = 31.5(1.5):68.5(1.5)%, Delta G = -0.22(2) kcal/mol). Thermodynamic parameters of the ring inversion are determined (Delta G(double dagger) = 8.9-9.0 kcal/mol, Delta H-double dagger = 9.6 kcal/mol, Delta S-double dagger = 2.1 eu). High-level quantum chemical calculations :(MP2, G2, CCSD(T)) nicely reproduce the experimental geometry and the predominance of the axial conformer in the gas phase.
We have synthesized a set of new unsaturated macrocyclic dithioethers with an increasing number of flexible methylene units 1-7 (Scheme 2) to investigate the correlation between the ring size of these ligands, the chelation effect and the consequences for an efficient PdCl2 coordination. The dithioethers 1-7 and the complex [PdCl2(4)]center dot CHCl3 were characterized by X-ray diffraction analysis. The crystal structures of 1-7 show that 2-7 are better preorganized chelating ligands for an exocyclic PdCl2 coordination than 1. The chelation effect of 1-7, the orientation of the sulfur atoms and the S center dot center dot center dot S donor distances, are influenced by the flexibility of the methylene units. In this series the unsaturated macrocyclic ligands 5 and 6 are the best chelating ligands for an efficient PdCl2 coordination. Comparative solvent extraction experiments with mn-12S(2)O(2) (mn = maleonitrile) reveal that the low interface activity of the new ligands reduces the extraction rate. However, a comparison with open-chain dithiomaleonitriles shows the impact of the macrocyclic effect of 4 and 5 on the extraction yield.
User-friendly protocols for the protecting group-free synthesis of 2,2'-biphenols via Suzuki-Miyaura coupling of o-halophenols and o-boronophenol are presented. The reactions proceed in water in the presence of simple additives such as K2CO3, KOH, KF, or TBAF and with commercially available Pd/C as precatalyst. Expensive or laboriously synthesized ligands or other additives are not required. In the case of bromophenols, efficient rate acceleration and short reaction times were accomplished by microwave irradiation.
Stereoselective synthesis of dienyl phosphonates via extended tethered ring-closing metathesis
(2013)
Allylphosphonates of allylic alcohols were converted to conjugated dienyl phosphonates in a one-flask reaction, comprising a ring-closing metathesis (RCM), a base-induced ring-opening, and an alkylation. The ring-opening proceeds with very high diastereoselectivity, giving exclusively the (1Z,3E)-configured dienes. Single diastereomers and mixtures of diastereomers can be used as starting materials without noticeable effect on the diastereoselectivity of the sequence.
Starting from the conveniently available ex-chiral pool building block (R,R)-hexa-1,5-diene-3,4-diol, the ten-membered ring lactones stagonolide E and curvulide A were synthesized using a bidirectional olefin-metathesis functionalization of the terminal double bonds. Key steps are (i) a site-selective cross metathesis, (ii) a highly diastereoselective extended tethered RCM to furnish a (Z,E)-configured dienyl carboxylic acid and (iii) a Ru-lipase-catalyzed dynamic kinetic resolution to establish the desired configuration at C9. Ring closure was accomplished by macrolactonization. Curvulide A was synthesized from stagonolide E through Sharpless epoxidation.
1,2-Diketones were synthesized from styrenes by combining a cross metathesis and a Ru-catalyzed alkene oxidation to an assisted tandem catalytic sequence. The synthesis relies on the use of just one metathesis precatalyst, which was in situ converted to the oxidation catalyst by addition of an alkyl hydroperoxide as a chemical trigger and oxidant. The one-flask sequence can be extended beyond 1,2-diketones to quinoxalines, by condensation of the oxidation products with ortho-phenylenediamine.
Cross metathesis of allyl alcohols how to suppress and how to promote double bond isomerization
(2013)
Under standard conditions the cross metathesis of allyl alcohols and methyl acrylate is accompanied by the formation of ketones, resulting from uncontrolled and undesired double bond isomerization. By conducting the CM in the presence of phenol, the catalyst loading and the reaction time required for quantiative conversion can be reduced, and isomerization can be suppressed. On the other hand, consecutive isomerization can be deliberately promoted by evaporating excess methyl acrylate after completing cross metathesis and by adding a base or silane as chemical triggers.
A six-step synthesis of the antidepressant rolipram from the popular analgetic 4-acetamidophenol (paracetamol) is described. The steps include oxidative functionalization of the aromatic core, diazonium salt formation via deacetylation-diazotation, Matsuda-Heck reaction, conjugate addition of nitromethane, and hydrogenative cyclization.
4-Phenol diazonium salts undergo Pd-catalyzed Heck reactions with various styrenes to 4'-hydroxy stilbenes. In almost all cases higher yields and fewer side products were observed, compared to the analogous 4-methoxy benzene diazonium salts. In contrast, the reaction fails completely with 2- and 3-phenol diazonium salts. For these substitution patterns the methoxy-substituted derivatives are superior.
Acetanilides can be deacetylated and diazotized in situ, and subsequently used in Pd-catalyzed coupling reactions without isolation of the diazonium intermediate. Heck reactions, Suzuki cross-coupling reactions, and a Pd-catalyzed [2+2+1]cycloaddition have been investigated as terminating CC bond-forming steps of this one-flask sequence. The sequence does not require the exchange of solvents or removal of by-products between the individual steps, but proceeds by addition of reagents and catalysts in due course.
Sulfonated polyanilines have become promising building blocks in the construction of biosensors, and therefore we use here differently substituted polymer forms to investigate the role of their structural composition and properties in achieving a direct electron transfer with the redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH). To this end, new copolymers containing different ratios of 2-methoxyaniline-5-sulfonic acid (MAS), 3-aminobenzenesulfonic acid (ABS) and 3-aminobenzoic acid (AB) units have been chemically synthesized. All polymers have been studied with respect to their ability to react directly with PQQ-GDH. This interaction has been monitored initially in solution, and subsequently on electrode surfaces. The results show that only copolymers with MAS and aniline units can directly react with PQQ-GDH in solution; the background can be mainly ascribed to the emeraldine salt redox state of the polymer, allowing rather easy reduction. However, when polymers and the enzyme are immobilized on the surface of carbon nanotube-containing electrodes, direct bioelectrocatalysis is also feasible in the case of copolymers composed of ABS/AB and MAS/AB units, existing initially in pernigraniline base form. This verifies that a productive interaction of the enzyme with differently substituted polymers is feasible when the electrode potential can be used to drive the reaction towards the oxidation of the substrate-reduced enzyme. These results clearly demonstrate that enzyme electrodes based on sulfonated polyanilines and direct bioelectrocatalysis can be successfully constructed.
The ternary system composed of the ionic liquid surfactant (IL-S) 1-butyl-3-methylimidazolium dodecylsulfate ([Bmim][DodSO(4)]), the room temperature ionic liquid (RTIL) 1-ethyl-3-methylimidazolium ethylsulfate ([Emim][EtSO4]), and toluene has been investigated. Three major mechanisms guiding the structure of the isotropic phase were identified by means of conductometric experiments, which have been correlated to the presence of oil-in-IL, bicontinuous, and IL-in-oil microemulsions. IL-S forms micelles in toluene, which swell by adding RTIL as to be shown by dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) experiments. Therefore, it is possible to form water free IL-in-oil reverse microemulsions <= 10 nm in size as a new type of nanoreactor.
The detection of hydrogen sulfide (H2S) by 2 + 1 resonance-enhanced multi-photon ionization (REMPI) and the application of H2S as a laser dopant for the detection of polar compounds in laser ion mobility (IM) spectrometry at atmospheric pressure were investigated. Underlying ionization mechanisms were elucidated by additional studies employing a drift cell interfaced to a time-of-flight mass spectrometer. Depending on the pressure, the primary ions H2S+, HS+, S+, and secondary ions, such as H3S+, were observed. The 2 + 1 REMPI spectrum of H2S near lambda = 302.5 nm was recorded at atmospheric pressure. Furthermore, the limit of detection and the linear range were established. In the second part of the work, H2S was investigated as an H2O analogous laser dopant for the ionization of polar substances by proton transfer. H2S exhibits a proton affinity (PA) similar to that of H2O, but a significantly lower ionization energy facilitating laser ionization. Ion-molecule reactions (IMR) of H3S+ with a variety of polar substances with PA between 754.6 and 841.6 kJ/mol were investigated. Representatives of different compound classes, including alcohols, ketones, esters, and nitroaromatics were analyzed. The IM spectra resulting from IMR of H3S+ and H3O+ with these substances are similar in structure, i.e., protonated monomer and dimer ion peaks are found depending on the analyte concentration.
Trithiaazapentalene derivatives were prepared by the reaction of 2-alkylidene-4-oxothiazolidines with Lawesson's reagent. They are classified as two structurally different trithiaazapentalene compounds that have different contributions of monocyclic 1,2-dithiole and 1,2,4-dithiazole structures and degrees of aromaticity of the bicyclic trithiaazapentalene system. The electron-donating ability of substituents at the C(5) position of the trithiaazapentalene system is recognized as the main cause for changes in pi-Celectron distribution. This is the first complete study of substituent effects on the structure of trithiapentalenes. (C) 2013 Elsevier Ltd. All rights reserved.
DNA nanotechnology holds great promise for the fabrication of novel plasmonic nanostructures and the potential to carry out single-molecule measurements using optical spectroscopy. Here, we demonstrate for the first time that DNA origami nanostructures can be exploited as substrates for surface-enhanced Raman scattering (SERS). Gold nanoparticles (AuNPs) have been arranged into dimers to create intense Raman scattering hot spots in the interparticle gaps. AuNPs (15 nm) covered with TAMRA-modified DNA have been placed at a nominal distance of 25 nm to demonstrate the formation of Raman hot spots. To control the plasmonic coupling between the nanoparticles and thus the field enhancement in the hot spot, the size of AuNPs has been varied from 5 to 28 nm by electroless Au deposition. By the precise positioning of a specific number of TAMRA molecules in these hot spots, SERS with the highest sensitivity down to the few-molecule level is obtained.
Kinetics and time-dependent Langmuir modeling of 4-nitrophenol adsorption onto Mansonia sawdust
(2013)
Often time's adsorption of large molecules onto untreated lignocellulosic materials is viewed as a two stage process and has frequently been characterized only by kinetic models while the rate limiting step of adsorption is determined only at various stages of the adsorption process. In this study the kinetics and the contribution of diffusion processes to 4-nitrophenol adsorption onto untreated sawdust was examined and the overall rate limiting step evaluated.
The adsorption profile showed an initial rapid uptake of 4-nitrophenol which decreased and became almost constant after 5 min of contact. Analysis of the adsorption profile with the intraparticle diffusion equation and fractional 4-nitrophenol uptake with time showed that the profile can be divided into three different stages. The rate determining step of 4-nitrophenol adsorption was then evaluated based on the activation energies of each processes along with their activation parameters (Delta G*, Delta H* and Delta S*). The results revealed that external mass transfer was the overall rate limiting step with activation parameters E-a = 21.11, Delta H* = 23.75 and Delta S* = 144.97. Time dependent Langmuir modeling was carried out to optimize process parameters. (c) 2013 Taiwan Institute of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
The nature of the major steric substituent constant scales for alkyl substituents, i.e. Omega(S), E-R and E-S' scales, was studied with the aid of the NBO and the natural steric (STERIC) analyses. Cyclohexyl esters R-3-CCOOC6H11 (R = alkyl or H) were used as the model compounds. Special emphasis was laid on the potential contribution of the polar component in these steric substituent parameters. In the light of our model the Omega(S) scale seems to be dominantly a steric substituent constant scale as is seen on the strengths of the good correlation between the Omega(S) constants of the CR3 group and the total steric exchange energy values E-TSEE for the model compounds. However, the Omega(S) values also seem to include a minor electronic component due to the varying electrostatic effect via the C alpha atom. On the other hand, E-R and E-S' parameters largely hinge on the size dependent polar effect of the CR3 alkyl group. By way of our model this repulsive interaction can be quantified by descriptor Delta q(OCO), the natural charge difference q(C)(C=O) - Sigma qO for the O-C(=O) functional group. Delta q(OCO) depends on the E-TSEE values, on qC alpha and on the polarization coefficients of the oxygen hybrid in the NBO of the pi(C=O) bond. The size sensitivity of the kinetic E-S' constants can be connected to variation of the Burgi-Dunitz angle in the transition state for the standard reaction used. A comparison is made for the q(C)(C=O) or Delta q(OCO) values computed on the one hand with the NBO formalism and on the other hand with the Hirshfeld formalism. A practical novel substituent constant q(C)(C=O) for the size of the alkyl groups is introduced.
In this paper, we present quantum dynamical calculations on electron correlation dynamics in atoms and molecules using explicitly time-dependent ab initio configuration interaction theory. The goals are (i) to show that in which cases it is possible to switch off the electronic correlation by ultrashort laser pulses, and (ii) to understand the temporal evolution and the time scale on which it reappears. We characterize the appearance of correlation through electron-electron scattering when starting from an uncorrelated state, and we identify pathways for the preparation of a Hartree-Fock state from the correlated, true ground state. Exemplary results for noble gases, alkaline earth elements, and selected molecules are provided. For Mg we show that the uncorrelated state can be prepared using a shaped ultrashort laser pulse.
The chain length and end groups of linear PEG grafted on smooth surfaces is known to influence protein adsorption and thrombocyte adhesion. Here, it is explored whether established structure function relationships can be transferred to application relevant, rough surfaces. Functionalization of poly(ether imide) (PEI) membranes by grafting with monoamino PEG of different chain lengths (M-n=1kDa or 10kDa) and end groups (methoxy or hydroxyl) is proven by spectroscopy, changes of surface hydrophilicity, and surface shielding effects. The surface functionalization does lead to reduction of adsorption of BSA, but not of fibrinogen. The thrombocyte adhesion is increased compared to untreated PEI surfaces. Conclusively, rough instead of smooth polymer or gold surfaces should be investigated as relevant models.
Two new 3-hydroxyisoflavanones, (S)-3,4',5-trihydroxy-2',7-dimethoxy-3'-prenylisoflavanone (trivial name kenusanone F 7-methyl ether) and (S)-3,5-dihydroxy-2',7-dimethoxy-2 '',2 ''-dimethylpyrano[5 '',6 '':3',4']isoflavanone (trivial name sophoronol-7-methyl ether) along with two known compounds (dalbergin and formononetin) were isolated from the stem bark of Dalbergia melanoxylon. The structures were elucidated using spectroscopic techniques. Kenusanone F 7-methyl ether showed activity against Mycobacterium tuberculosis, whereas both of the new compounds were inactive against the malaria parasite Plasmodium falciparum at 10 mu g/ml. Docking studies showed that the new compounds kenusanone F 7-methyl ether and sophoronol-7-methyl ether have high affinity for the M. tuberculosis drug target INHA.
In the oxidative system (t-BuOCl+NaI) trifluoromethanesulfonamide is regio- and stereoselectively added to only one double bond of cyclopentadiene and 1,3-cyclohexadiene giving rise to 1,1,1-trifluoro-N-(5-iodocyclopent-2-en-1-yl)methanesulfonamide 7 and trans-N,N'-cyclohex-3-en-1,2-diylbis(1,1,1-trifluoromethanesulfonamide) 8. The structure of 7 and 8 was determined by X-ray, NMR, and MS. With 1,4-cyclohexadiene, addition to both double bonds occurs with the formation of N,N'-(4-chloro-5-iodocyclohexan-1,2-diyl)bis(1,1,1-trifluoromethanesulfonamide) 9. Under the action of sodium iodide in acetone, the latter product undergoes halogenophilic attack with the reduction of the CHI group and elimination of HCl to give trans-N,N'-cyclohex-4-en-1,2-diylbis(1,1,1-trifluoromethanesulfonamide) 10, whose structure was also determined by X-ray analysis. 1,3,5-Cycloheptatriene under these conditions is oxidized to benzaldehyde and does not react with trifluoromethanesulfonamide.
A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas-sorption behavior of both materials for H-2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect.
L-edge spectroscopy of 3d transition metals provides important electronic structure information and has been used in many fields. However, the use of this method for studying dilute aqueous systems, such as metalloenzymes, has not been prevalent because of severe radiation damage and the lack of suitable detection systems. Here we present spectra from a dilute Mn aqueous solution using a high-transmission zone-plate spectrometer at the Linac Coherent Light Source (LCLS). The spectrometer has been optimized for discriminating the Mn L-edge signal from the overwhelming 0 K-edge background that arises from water and protein itself, and the ultrashort LCLS X-ray pulses can outrun X-ray induced damage. We show that the deviations of the partial-fluorescence yield-detected spectra from the true absorption can be well modeled using the state-dependence of the fluorescence yield, and discuss implications for the application of our concept to biological samples.
The non-ionic monomer (methoxy diethylene glycol) acrylate is copolymerized with its azodye-functionalized acrylate analogue using reversible addition-fragmentation chain transfer (RAFT) polymerization. Copolymerization is increasingly difficult with increasing amounts of the azo-dye-bearing monomer. The resulting water-soluble polymers are thermosensitive, exhibiting lower critical solution temperature (LCST) behavior, which can be modulated by the photoinduced trans-cis isomerization of the dye. While already small contents of the hydrophobic azobenzene group reduce the phase-transition temperatures of the copolymers strongly, photoisomerization of the apolar trans-state to the more-polar cis-state has only a small effect, and decreases rather than increases the cloud points.
Sugar-based molecules and polysaccharide biomass can be turned into porous functional carbonaceous products at comparably low temperatures of 400 degrees C under a nitrogen atmosphere in the presence of an ionic liquid (IL) or a poly(ionic liquid) (PIL). The IL and PIL act as "activation agents" with own structural contribution, and effectively promote the conversion and pore generation in the biomaterials even at a rather low doping ratio (7 wt%). In addition, this "induced carbonization" and pore forming phenomenon enables the preservation of the biotemplate shape to the highest extent and was employed to fabricate shaped porous carbonaceous materials from carbohydrate-based biotemplates, exemplified here with cellulose filter membranes, coffee filter paper and natural cotton. These carbonized hybrids exhibit comparably good mechanical properties, such as bendability of membranes or shape recovery of foams. Moreover, the nitrogen atoms incorporated in the final products from the IL/PIL precursors further improve the oxidation stability in the fire-retardant tests.
Sugar-based molecules and polysaccharide biomass can be turned into porous functional carbonaceous products at comparably low temperatures of 400 °C under a nitrogen atmosphere in the presence of an ionic liquid (IL) or a poly(ionic liquid) (PIL). The IL and PIL act as "activation agents" with own structural contribution, and effectively promote the conversion and pore generation in the biomaterials even at a rather low doping ratio (7 wt%). In addition, this "induced carbonization" and pore forming phenomenon enables the preservation of the biotemplate shape to the highest extent and was employed to fabricate shaped porous carbonaceous materials from carbohydrate-based biotemplates, exemplified here with cellulose filter membranes, coffee filter paper and natural cotton. These carbonized hybrids exhibit comparably good mechanical properties, such as bendability of membranes or shape recovery of foams. Moreover, the nitrogen atoms incorporated in the final products from the IL/PIL precursors further improve the oxidation stability in the fire-retardant tests.
An amphiphilic linear ternary block copolymer was synthesised in three consecutive steps via reversible addition-fragmentation chain transfer polymerisation. Oligo(ethylene glycol) monomethyl ether acrylate was engaged as a hydrophilic building block, while benzyl acrylate and 3-tris(trimethylsiloxy)silyl propyl acrylate served as hydrophobic building blocks. The resulting "triphilic" copolymer consists thus of a hydrophilic (A) and two mutually incompatible "soft" hydrophobic blocks, namely, a lipophilic (B) and a silicone-based (C) block, with all blocks having glass transition temperatures well below 0 A degrees C. The triphilic copolymer self-assembles into spherical multicompartment micellar aggregates in aqueous solution, where the two hydrophobic blocks undergo local phase separation into various ultrastructures as evidenced by cryogenic transmission electron microscopy. Thus, a silicone-based polymer block can replace the hitherto typically employed fluorocarbon-based hydrophobic blocks in triphilic block copolymers for inducing multicompartmentalisation.
Derivatization of fullerene (C60) with branched aliphatic chains softens C60-based materials and enables the formation of thermotropic liquid crystals and room temperature nonvolatile liquids. This work demonstrates that by carefully tuning parameters such as type, number and substituent position of the branched chains, liquid crystalline C60 materials with mesophase temperatures suited for photovoltaic cell fabrication and room temperature nonvolatile liquid fullerenes with tunable viscosity can be obtained. In particular, compound 1, with branched chains, exhibits a smectic liquid crystalline phase extending from 84°C to room temperature. Analysis of bulk heterojunction (BHJ) organic solar cells with a ca. 100 nm active layer of compound 1 and poly(3-hexylthiophene) (P3HT) as an electron acceptor and an electron donor, respectively, reveals an improved performance (power conversion efficiency, PCE: 1.6 ñ 0.1%) in comparison with another compound, 10 (PCE: 0.5 ñ 0.1%). The latter, in contrast to 1, carries linear aliphatic chains and thus forms a highly ordered solid lamellar phase at room temperature. The solar cell performance of 1 blended with P3HT approaches that of PCBM/P3HT for the same active layer thickness. This indicates that C60 derivatives bearing branched tails are a promising class of electron acceptors in soft (flexible) photovoltaic devices.