Refine
Has Fulltext
- no (124)
Year of publication
Document Type
- Article (124) (remove)
Is part of the Bibliography
- yes (124)
Keywords
- X-ray structure (6)
- X-ray (4)
- Cycloaddition (3)
- Lactams (3)
- Structure elucidation (3)
- Trifluoromethanesulfonamide (3)
- crystal structure (3)
- Alkylpyridinium salts (2)
- Arenesulfonamides (2)
- EPR (2)
Institute
- Institut für Chemie (124) (remove)
Sorption of coinage metal cyano complexes by a chelating resin containing amino-glucitol groups
(1994)
Ligand Exchange Reactions of Bis(acetyl-acetonato)dioxomolybdenum(VI) and Molybdenum Hexacarbonyl
(1995)
Crystal structure of methoxo-oxo[benzoylaceton-salicyl hydrazonato(2-)]vanadium(V), C18H17N2O5V
(1996)
Selenides of the type R1Se-EMe3 (E = Si, Ge, Sn, Pb) react with xenon difluoride by cleavage of the Se-E bond to yield the R1Se-F intermediate and the fluorides Me3E-F, whereas the Se-C bond in PhSe-tBu (E = C) is stable against XeF2. The presence of R1Se-F intermediates is confirmed by addition to acetylenes (4-octyne, 3-hexyne). Thus, the fluoroselenenylation of acetylenes gives fluoro(organylseleno)olefins in preparative yields. In the cases of E = Si, Ge, Sn, and Pb, aryl and n-alkyl groups are suitable as the substituent R1. The X-ray crystal structural analysis of (E)-3- (p-carboxyphenylseleno)-4-fluorohex-3-ene - the first example of an uncharged fluoroselenoolefin synthesized from p- EtO2C-C6H4-Se-SnMe3, XeF2, and 3-hexyne followed by an ester hydrolysis - shows that the addition of the selenenylfluoride intermediate to the acetylene proceeds via a trans-addition, as is known for the R2Se2-XeF2 reagents.
Core-Modified Hexaphyrins; Characterization of Two- and Four-Ring Inverted 26 ô Aromatic Macrocycles
(2003)
Indium(III) chloride forms in water with potassium 1,2-dithiooxalate (dto) and potassium 1,2-dithiosquarate (dtsq) stable coordination compounds. Due to the higher bridging ability of the 1,2-dithiooxalate ligand in all cases only thiooxalate bridged binuclear complexes were found. From 1,2-dithioquadratate with an identical donor atom set mononuclear trischelates could be isolated. Five crystalline complexes, (BzlMe(3)N)(4)[(dto)(2)In(dto)In(dto)(2)] (1), (BzlPh(3)P)(4)[(dto)(2)In(dto)In(dto)(2)] (2), (BzlMe(3)N)(3)[In(dtsq)(3)] (3), (Bu4N)(3)[In(dtsq)(3)] (4) and (Ph4P)[In(dtsq)(2)(DMF)(2)] (5), have been isolated and characterized by X-ray analyses. Due to the type of the complex and the cations involved these compounds crystallize in different space groups with the following parameters: 1, monoclinic in P2(1)/c with a = 14.4035(5) Angstrom, b = 10.8141(5) Angstrom, c = 23.3698(9) Angstrom, beta = 124.664(2)degrees, and Z = 2; 2, triclinic in P (1) over bar with a = 11.3872(7) Angstrom, b = 13.6669(9) Angstrom, c = 17.4296(10) Angstrom, alpha = 88.883(5)degrees, beta = 96.763(1)degrees, gamma = 74.587(5)degrees, and Z = 1; 3, hexagonal in R3 with a = 20.6501(16) Angstrom, b = 20.6501(16) Angstrom, c = 19.0706(13) Angstrom and Z = 6; 4, monoclinic in P21/c with a = 22.7650(15) Angstrom, b = 20.4656(10) Angstrom, c = 14.4770(9) Angstrom, P
Two different approaches. with an unsaturated carbohydrate as a radical acceptor and a carbohydrate derived aldehyde as a radical precursor, led to key intermediates in the synthesis of 3-deoxy-D-oct-2-ulosonic acids (KDO). Manganese(III) acetate and cerium(IV) ammonium nitrate were the reagents of choice for the oxidative generation of radicals, whereas samarium(II) iodide was employed for reductive couplings. Both strategies were realized by using easily available starting materials, with acetic acid as C-2 and ethyl acrylate as C-3 building blocks, respectively
Heterobimetallic 3d-4-complexes with bis(1;2-dithiooxalato)nickelate(II) as planar bridging block
(2005)
Planar bis(1,2-dithiooxalato)nickelates(II) react in aqueous solutions of lanthanide ions to form pentanuclear, heterobimetallic complexes of the general composition [{Ln(H2O)(n)}(2)- {Ni(dto)(2)}(3)] (.) xH(2)O (Ln = Y3+, La3+, Ce3+, Pr3+, Nd3+, Sm3+, Eu3+, Gd3+, Tb3+, Dy3+, Ho3+, Er3+, Tm3+, Yb3+, Lu3+; n = 4 or 5; x = 9-12). With [{Nd(H2O)(5)}(2){Ni(S2C2O2)(2)}(3)] (.) xH(2)O (x = 10-12) (1) and [{Er(H2O)(4)}(2){Ni(S2C2O2)(2)}(3)] (.) xH(2)O (x = 9- 10) (2) we were able to isolate two complexes of this series as single crystals, which were characterized by X-ray structure analysis. Depending on the individual ionic radii of the lanthanide ions, the compounds crystallize in two different crystal systems with the following unit cell parameters: 1, monoclinic in P2(1)/c with a = 11.3987(13), b = 11.4878(8), c = 20.823(2)angstrom , beta = 98.907(9)degrees and Z = 2; 2, triclinic in P (1) over bar with a = 10.5091(6), b = 11.0604(6), c = 11.2823(6) angstrom, alpha = 107.899(4)degrees, beta = 91.436(4)degrees, gamma = 112.918(4)degrees and Z = 1. The channels and cavities appearing in the packing of the molecules are occupied by uncoordinated water molecules. High magnetic moments up to 14.65 BM./f.u. have been observed at room temperature due to the combined moments of the individual lanthanide ions
General syntheses have been developed for meso-substituted porphyrins with one or two substituents in the 5,10- positions and no beta substituents. 5-Substituted porphyrins with only one meso substituent are easily prepared by an acid-catalyzed condensation of dipyrromethane, pyrrole-2-carbaldehyde. and an appropriate aldehyde using a "[2+1+1]" approach. Similarly, 5,10-disubstituted porphyrins are accessible by simple condensation of unsubstituted tripyrrane with pyrrole and various aldehydes using a "[3+1]" approach. The yields for these reactions are low to moderate and additional formation of either di- or mono-substituted porphyrins due to scrambling of the intermediates is observed. However, the reactions can be performed quite easily and the desired target compounds are easily removed due to large differences in solubility. A complementary and more selective synthesis involves the use of organolithium reagents for SNAr reactions. Reaction of in situ generated porphyrin (porphine) with 1.1-8 equivalents of RLi gave the monosubstituted porphyrins, while reaction with 3-6 equivalents of RLi gave the 5,10-disubstituted porphyrins in yields ranging from 43 to 90%. These hitherto almost inaccessible compounds complete the series of different homologues of A-, 5,15-A(2)-, 5,10-A(2)-, A(3)-, and A(4)-type porphyrin's and allow an investigation of the gradual influence of type, number, and regiochemical arrangement of substituents on the properties of meso-substituted porphyrins. They also present important starting materials for the synthesis of ABCD porphyrins and are potential synthons for supramolecular materials requiring specific substituent orientations
The complexes [(HgCl2)(2)((ch)(2)30S(4)O(6))] (1), [HgCl,(mn21S(2)O(5))] (2), [HgCl2(ch18S(2)O(4))] (3) and [HgI(meb12S(2)O(2))](2)[Hg2I6] (4) have been synthesized, characterized and their crystal structures were determined. In [(HgCl2)(2)((ch)(2)3OS(4)O(6))] two HgCl2 units are discretely bonded within the ligand cavity of the 30-membered dichinoxaline-tetrathia-30-crown-10 ((ch)(2)30S(4)O(6)) forming a binuclear complex. HgCl2 forms I : I "in-cavity" complexes with the 21-membered maleonitrile-dithia-21-crown-7(mn21S(2)O(5)) ligand and the 18-membered chinoxaline- dithia-18-crown-6 (ch18S(2)O(4)) ligand, respectively. The 12-membered 4-methyl-benzo-dithia-12-crown-4 (meb12S(2)O(2)) ligand gave with two equivalents HgI2 the compound [HgI(meb12S(2)O(2))](2)[Hg2I6]. In the cation [HgI(meb12S(2)O(2))](+) meb12S(2)O(2) forms with the cation HgI+ a half-sandwich complex
Homoleptic Ni-II and Fe-II complexes of the "large-surface" phenanthroline-type ligand 1,12-diazaperylene (dap), [Ni(dap)(3)](BF4)(2) (1) and [Fe(dap)(3)](PF6)(2) (2), respectively, were synthesized. In the crystal structure the complex cation [M(dap)(3)](2+) (M = Ni, Fe) exhibits C-3 symmetry and interacts with three other cations by pi-pi stacking. It forms a new metalla-supramolecular assembly with a honeycomb structure containing nanochannels running parallel to the crystallographic c axis. Aggregation by pi-pi stacking between metal complexes of "large-surface" ligands should give new perspectives for inorganic supramolecular chemistry.
The crystal and molecular structures of sodium and barium complexes of dibenzo-24-crown-8 ether
(2006)
The sodium and barium isothiocyanate complexes of 6,7,9,10,12,13,20,21,23,24,26,27-dodecahydrodibenzo[b,n]- 1,4,7,10,13,16,19,22-octaoxacyclotetracosin (dibenzo-24-crown-8 ether = DB24C8) were synthesized and analyzed by X-ray diffraction. The sodium complex, [Na(DB24C8)(NCS)(H2O)] 1, crystallizes in the orthorhombic space group Fdd2 with 16 molecules in the unit cell. The coordination number of Na is 6 and the central ion is located in a distorted octahedric environment. Only four of the crown ether oxygen atoms are involved. The coordination polyhedron is completed by the isothiocanate anion and by a water molecule, which is stabilized by hydrogen bonds. The barium complex, [Ba(DB24C8)(NCS)(2)] 2, crystallizes in the trigonale space group P3(1)21 with 3 molecules in the unit cell. Crystallographic C-2 symmetry is observed for the complex. The coordination number of Ba is 10. Barium is coordinated with the eight oxygen atoms of the macrocyclic ligand and with two isothiocyanate anions. The absolute structure was estimated using the FLACK parameter
The new tetrathiacrown ethers maleonitrile-tetrathia-12-crown-4 (mn12S(4)) and maleonitrile-tetrathia-13-crown- 4 (mn13S(4)) have been prepared and characterised by X-ray crystallographic analysis. These crown ethers form 2:1, 3:2 and 1: 1 complexes with AgY (Y = BF4, PF6). The crystal structures of [Ag(mn12S(4))(2)]BF4 (3a), [Ag(mn13S(4))(2)]BF4 (4a) and [Ag-2(mn13S(4))(3)](PF6)(2) (6b) have been determined. Compound 3a contains the centrosymmetric sandwich complex cation [Ag(mn12S(4))(2)](+) where each mn12S(4) ligand is coordinated to the Ag centre in an endo manner through all four S atoms. The 2:1 complex [Ag(mn12S(4))(2)](+) is the first sandwich complex with a tetrathiacrown ether and the first complex with an octa(thioether) coordination sphere. The crystal structure of compound 4a also reveals a 2:1 complex. This complex, [Ag(mnl3S(4))(2)](+), exhibits a half-sandwich structure. One mn13S(4) ligand coordinates to Ag+ by all four S donor atoms and the other 13S(4) crown by only one S atom. Compound 6b contains a dinuclear Ag complex. The Ag complexes 3a,b-8a,b were also studied by electrospray ionisation mass spectrometry. Collision-induced dissociation (CID) was used to compare the relative stability of 2:1 complexes [AgL2]+ and 1:1 complexes [AgL](+) (L = mn12S(4), mn13S(4)). The C-13 NMR chemical shifts of 2:1 and 1:1 Ag complexes and their corresponding free ligands were also estimated and compared. The free energy of the barrier of ring inversion (Delta G(double dagger)) for [Ag(mn12S(4))(2)](+) was determined to be 64 kJmol(-1).
The reaction of methyl acridin-9-ylthiosemicarbazide under basic conditions with methyl bromoacetate resulted in a 1,3-thiazolin-4-one structure as provided by X-ray crystallography. The structure forced a re-evaluation of the reactant methyl acridin-9-ylthiosemicarbazide, originally thought to be 2-methyl 4-acridin-9-ylthiosemicarbazide based on synthetic expectations, but which when examined by X-ray crystallography was found to be in fact the isomeric 2- methyl 1-acridin-9-ylthiosemicarbazide resulting from rearrangement via a spiro form which it is in equilibrium with in solution. The product resulting from reaction with methyl iodide was also studied and the previously reported semicarbazide produced by reaction with MNO was re-examined. In both cases, the 1,2 isomer rather than the 2,4 isomer was found to be present based on the sign of the 3JCH3,N11 coupling. Full characterization of the compounds was rendered by 1H, 13C, and 15N solution-state NMR, and in the solid state, by both 13C and 15N NMR.
The title compound, bis(5-methylthio-1,2-dithiole-3-thione)-disulfide, was yielded for the first time as by- product of the reaction of nickel(II) and cobalt(II) ions with 5-methylthio-1,2-dithiole-3-thione-4-thiolate. The compound can be obtained directly by oxidation of the ammonium salt of the ligand. C8H6S10 forms three polymorphs: (I), which crystallizes in the orthorhombic space group P212121, (II) and (III), which crystallize in the monoclinic space groups P21/c and P21/n, respectively. The crystal and molecular structures are presented here. The determination of the absolute configuration of (I) indicated the P-helical enantiomer. In contrast to this, the crystals of (II) und (III) are racemic, containing P- and M-helical enantiomers. The polymorphs differ in the kind of skewing around the disulfide bond and of the positions of the both dithiole rings to the S-S-moiety
Multinuclear dynamic NMR spectroscopy of 3,5-bis(trifluoromethylsulfonyl)-1,3,5-oxadiazinane (3) revealed the existence of two conformers with differently oriented CF3 groups with respect to the ring, and two dynamic processes: ring inversion and restricted rotation about the N-S bond. Two transition states connecting the two conformers and corresponding to clockwise and counterclockwise rotations about the N-S bond were found; the calculated activation barriers of about 12 kcal/mol are in excellent agreement with those measured experimentally for the related molecule 1,3,5-tris(trifluoromethylsulfonyl)-1,3,5-triazinane (1). X-ray analysis proved the existence of the symmetric isomer of 3, which is the minor isomer in solutions but the only one in the crystal due to packing effects. The normal Perlin effect (JCHax < JCHeq)observed for 2(6)-CH2 in 3, whereas the reversed Perlin effect was found for the 4-CH2 group in 3 as well as for all CH2 groups in 1 both experimentally and theoretically. The latter effect in compounds 1, 3, and 1- (methylsulfonyl)-3,5-bis(trifluoromethylsulfonyl)-1,3,5-triazinane (2) can be considered as a genuine reverse Perlin effect since larger values of 1JCH are observed for longer C-H bonds.
Reduction of 4-nitro-1-ethyl-1H-1,2,3-triazole with aluminum in alkaline medium resulted in a syn-isomer of 1,2- bis(1-ethyl-1H-1,2,3-triazol-4-yl)diazene 1-oxide. The latter according to the data of X-ray diffraction analysis existed in the crystal as the most stable s-cis,s-trans-conformer, and in solution, as showed NMR data, as a mixture of s-cis,s-trans- and s-trans,s-trans-conformers. The data of quantum-chemical calculations are in agreement with the results of the structural studies.
Acid-catalyzed reaction of trifluoromethanesulfonamide with paraformaldehyde in ethyl acetate led to the formation of oxymethylated products that did not form in the reaction carried out in sulfuric acid. Following products were obtained: 5-trifluoromethylsulfonyl-1,3-dioxazinane, 3,7-bis-(trifluoromethylsulfonyl)-1,5,3,7-dioxadiazocane, and a complex of trifluoromethanesulfonamide with 2,4,8,10-tetraoxospiro[5,5]undecene, 1:1. The spiroring resulted from the cyclization of pentaerythritol under the action of formaldehyde. The pentaerythritol formed in its turn by oxymethylation of the methyl group of ethyl acetate with paraformaldehyde followed by the reduction of the COOEt group into CH2 OH by the formaldehyde.
From a series of pentanuclear, heterobimetallic complexes of the general composition [{Ln(H2O)n}2{Ni(dto)2}3] · xH2O, four complexes (Ln = Gd(III) with n = 4; Ln = Dy(III), Ho(III), or Er(III), with n = 5; x = 9-12; dto = 1,2- dithiooxalate) were studied due to their large magnetic moments (up to 14.65 B.M.). The magnetic properties of these complete series were measured at room temperature and the temperature dependent magnetic properties of the complexes Gd2Ni3, Dy2Ni3, Ho2Ni3, and Er2Ni3 were studied at room temperature down to 1.8 K. Whereas the intramolecular metal- metal distances were rather long (Ni1-Ni2: 11.0-11.5 Å; Ln-Ni: 6.0-6.3 Å), relatively short intermolecular metal-metal distances (Ni1-Ni2;: 3.5 Å; Er-Er;: 6.0 Å) were found in the crystal lattice, giving rise to weak intermolecular metal-metal interactions. These weak spin interactions were also supported by the EPR spectrum of a powdered sample of the diamagnetically undiluted Gd2Ni3 complex.
The crystal and molecular structures of trans-2,4,4-trimethyl-4-silathiane 1-oxide 1 and 4,4-dimethyl-4- silathiane 1,1-dioxide 2 were determined by single crystal X-ray diffraction. Both compounds have the chair conformation with the 2-Me and the S=O group in compound 1 occupying the equatorial positions. The DFT (B3LYP/6-311G(d,p)) and MP2 (MP2/6-311G(d,p)) theoretical calculations nicely reproduce the X-ray experimental geometry. The obtained results are discussed in connection with the electronic and structural properties of the compounds.
A series of 9,10-diarylanthracenes with various substituents at the ortho positions have been synthesised by palladium-catalysed cross-coupling reactions. Such compounds exhibit interesting physical properties and can be applied as molecular switches. Despite the high steric demand of the substituents, products were formed in moderate-to-good yields. In some cases, microwave conditions further improved yields. Bis-coupling afforded two isomers (syn and anti) that do not interconvert at room temperature. These products were easily separated and their relative stereochemistries were unequivocally assigned by NMR spectroscopy and X-ray analysis. The syn and anti isomers exhibit different physical properties (e.g., melting points and solubilities) and interconversion by rotation around the aryl-aryl axis commences at <100 °C for fluoro-substituted diarylanthracenes and at >300 °C for alkyl- or alkoxy-substituted diarylanthracenes. The reactions with singlet oxygen were studied separately and revealed different reactivities and reaction pathways. The yields and reactivities depend on the size and electronic nature of the substituents. The anti isomers form the same 9,10-endoperoxides as the syn species, occasionally accompanied by unexpected 1,4-endoperoxides as byproducts. Thermolysis of the endoperoxides exclusively yielded the syn isomers. The interesting rotation around the aryl-aryl axis allows the application of 9,10-diarylanthracenes as molecular switches, which are triggered by light and air under mild conditions. Finally, the oxygenation and thermolysis sequence provides a simple, synthetic access to a single stereoisomer (syn) from an unselective coupling step.
A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas- sorption behavior of both materials for H2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect.