Refine
Year of publication
- 2013 (158) (remove)
Document Type
- Article (99)
- Doctoral Thesis (33)
- Postprint (20)
- Habilitation Thesis (2)
- Review (2)
- Master's Thesis (1)
- Other (1)
Keywords
- Hydrogel (3)
- Nanopartikel (3)
- biomaterials (3)
- ligand (3)
- photoisomerization (3)
- Crystal structure (2)
- DFT calculations (2)
- Density functional calculations (2)
- ICSS (2)
- Ion mobility spectrometry (2)
Institute
- Institut für Chemie (158) (remove)
Sugar-based molecules and polysaccharide biomass can be turned into porous functional carbonaceous products at comparably low temperatures of 400 °C under a nitrogen atmosphere in the presence of an ionic liquid (IL) or a poly(ionic liquid) (PIL). The IL and PIL act as “activation agents” with own structural contribution, and effectively promote the conversion and pore generation in the biomaterials even at a rather low doping ratio (7 wt%). In addition, this “induced carbonization” and pore forming phenomenon enables the preservation of the biotemplate shape to the highest extent and was employed to fabricate shaped porous carbonaceous materials from carbohydrate-based biotemplates, exemplified here with cellulose filter membranes, coffee filter paper and natural cotton. These carbonized hybrids exhibit comparably good mechanical properties, such as bendability of membranes or shape recovery of foams. Moreover, the nitrogen atoms incorporated in the final products from the IL/PIL precursors further improve the oxidation stability in the fire-retardant tests.
Various synthetic approaches were explored towards the preparation of poly(N-substituted glycine) homo/co-polymers (a.k.a. polypeptoids). In particular, monomers that would facilitate in the preparation of bio-relevant polymers via either chain- or step-growth polymerization were targeted. A 3-step synthetic approach towards N-substituted glycine N-carboxyanhydrides (NNCA) was implemented, or developed, and optimized allowing for an efficient gram scale preparation of the aforementioned monomer (chain-growth). After exploring several solvents and various conditions, a reproducible and efficient ring-opening polymerization (ROP) of NNCAs was developed in benzonitrile (PhCN). However, achieving molecular weights greater than 7 kDa required longer reaction times (>4 weeks) and sub-sequentially allowed for undesirable competing side reactions to occur (eg. zwitterion monomer mechanisms). A bulk-polymerization strategy provided molecular weights up to 11 kDa within 24 hours but suffered from low monomer conversions (ca. 25%). Likewise, a preliminary study towards alcohol promoted ROP of NNCAs suffered from impurities and a suspected alternative activated monomer mechanism (AAMM) providing poor inclusion of the initiator and leading to multi-modal dispersed polymeric systems. The post-modification of poly(N-allyl glycine) via thiol-ene photo-addition was observed to be quantitative, with the utilization of photo-initiators, and facilitated in the first glyco-peptoid prepared under environmentally benign conditions. Furthermore, poly(N-allyl glycine) demonstrated thermo-responsive behavior and could be prepared as a semi-crystalline bio-relevant polymer from solution (ie. annealing). Initial efforts in preparing these polymers via standard poly-condensation protocols were insufficient (step-growth). However, a thermally induced side-product, diallyl diketopiperazine (DKP), afforded the opportunity to explore photo-induced thiol-ene and acyclic diene metathesis (ADMET) polymerizations. Thiol-ene polymerization readily led to low molecular weight polymers (<2.5 kDa), that were insoluble in most solvents except heated amide solvents (ie. DMF), whereas ADMET polymerization, with diallyl DKP, was unsuccessful due to a suspected 6 member complexation/deactivation state of the catalyst. This understanding prompted the preparation of elongated DKPs most notably dibutenyl DKP. SEC data supports the aforementioned understanding but requires further optimization studies in both the preparation of the DKP monomers and following ADMET polymerization. This work was supported by NMR, GC-MS, FT-IR, SEC-IR, and MALDI-Tof MS characterization. Polymer properties were measured by UV-Vis, TGA, and DSC.
Cellulose is the most abundant biopolymer on earth. In this work it has been used, in various forms ranging from wood to fully processed laboratory grade microcrystalline cellulose, to synthesise a variety of metal and metal carbide nanoparticles and to establish structuring and patterning methodologies that produce highly functional nano-hybrids. To achieve this, the mechanisms governing the catalytic processes that bring about graphitised carbons in the presence of iron have been investigated. It was found that, when infusing cellulose with an aqueous iron salt solution and heating this mixture under inert atmosphere to 640 °C and above, a liquid eutectic mixture of iron and carbon with an atom ratio of approximately 1:1 forms. The eutectic droplets were monitored with in-situ TEM at the reaction temperature where they could be seen dissolving amorphous carbon and leaving behind a trail of graphitised carbon sheets and subsequently iron carbide nanoparticles. These transformations turned ordinary cellulose into a conductive and porous matrix that is well suited for catalytic applications. Despite these significant changes on the nanometre scale the shape of the matrix as a whole was retained with remarkable precision. This was exemplified by folding a sheet of cellulose paper into origami cranes and converting them via the temperature treatment in to magnetic facsimiles of those cranes. The study showed that the catalytic mechanisms derived from controlled systems and described in the literature can be transferred to synthetic concepts beyond the lab without loss of generality. Once the processes determining the transformation of cellulose into functional materials were understood, the concept could be extended to other metals and metal-combinations. Firstly, the procedure was utilised to produce different ternary iron carbides in the form of MxFeyC (M = W, Mn). None of those ternary carbides have thus far been produced in a nanoparticle form. The next part of this work encompassed combinations of iron with cobalt, nickel, palladium and copper. All of those metals were also probed alone in combination with cellulose. This produced elemental metal and metal alloy particles of low polydispersity and high stability. Both features are something that is typically not associated with high temperature syntheses and enables to connect the good size control with a scalable process. Each of the probed reactions resulted in phase pure, single crystalline, stable materials. After showing that cellulose is a good stabilising and separating agent for all the investigated types of nanoparticles, the focus of the work at hand is shifted towards probing the limits of the structuring and pattering capabilities of cellulose. Moreover possible post-processing techniques to further broaden the applicability of the materials are evaluated. This showed that, by choosing an appropriate paper, products ranging from stiff, self-sustaining monoliths to ultra-thin and very flexible cloths can be obtained after high temperature treatment. Furthermore cellulose has been demonstrated to be a very good substrate for many structuring and patterning techniques from origami folding to ink-jet printing. The thereby resulting products have been employed as electrodes, which was exemplified by electrodepositing copper onto them. Via ink-jet printing they have additionally been patterned and the resulting electrodes have also been post functionalised by electro-deposition of copper onto the graphitised (printed) parts of the samples. Lastly in a preliminary test the possibility of printing several metals simultaneously and thereby producing finely tuneable gradients from one metal to another have successfully been made. Starting from these concepts future experiments were outlined. The last chapter of this thesis concerned itself with alternative synthesis methods of the iron-carbon composite, thereby testing the robustness of the devolved reactions. By performing the synthesis with partly dissolved scrap metal and pieces of raw, dry wood, some progress for further use of the general synthesis technique were made. For example by using wood instead of processed cellulose all the established shaping techniques available for wooden objects, such as CNC milling or 3D prototyping, become accessible for the synthesis path. Also by using wood its intrinsic well defined porosity and the fact that large monoliths are obtained help expanding the prospect of using the composite. It was also demonstrated in this chapter that the resulting material can be applied for the environmentally important issue of waste water cleansing. Additionally to being made from renewable resources and by a cheap and easy one-pot synthesis, the material is recyclable, since the pollutants can be recovered by washing with ethanol. Most importantly this chapter covered experiments where the reaction was performed in a crude, home-built glass vessel, fuelled – with the help of a Fresnel lens – only by direct concentrated sunlight irradiation. This concept carries the thus far presented synthetic procedures from being common laboratory syntheses to a real world application. Based on cellulose, transition metals and simple equipment, this work enabled the easy one-pot synthesis of nano-ceramic and metal nanoparticle composites otherwise not readily accessible. Furthermore were structuring and patterning techniques and synthesis routes involving only renewable resources and environmentally benign procedures established here. Thereby it has laid the foundation for a multitude of applications and pointed towards several future projects reaching from fundamental research, to application focussed research and even and industry relevant engineering project was envisioned.
Hydrothermal carbonisation
(2013)
The world’s appetite for energy is producing growing quantities of CO2, a pollutant that contributes to the warming of the planet and which currently cannot be removed or stored in any significant way. Other natural reserves are also being devoured at alarming rates and current assessments suggest that we will need to identify alternative sources in the near future. With the aid of materials chemistry it should be possible to create a world in which energy use needs not be limited and where usable energy can be produced and stored wherever it is needed, where we can minimize and remediate emissions as new consumer products are created, whilst healing the planet and preventing further disruptive and harmful depletion of valuable mineral assets. In achieving these aims, the creation of new and very importantly greener industries and new sustainable pathways are crucial. In all of the aforementioned applications, new materials based on carbon, ideally produced via inexpensive, low energy consumption methods, using renewable resources as precursors, with flexible morphologies, pore structures and functionalities, are increasingly viewed as ideal candidates to fulfill these goals. The resulting materials should be a feasible solution for the efficient storage of energy and gases. At the end of life, such materials ideally must act to improve soil quality and to act as potential CO2 storage sinks. This is exactly the subject of this habilitation thesis: an alternative technology to produce carbon materials from biomass in water using low carbonisation temperatures and self-generated pressures. This technology is called hydrothermal carbonisation. It has been developed during the past five years by a group of young and talented researchers working under the supervision of Dr. Titirici at the Max-Planck Institute of Colloids and Interfaces and it is now a well-recognised methodology to produce carbon materials with important application in our daily lives. These applications include electrodes for portable electronic devices, filters for water purification, catalysts for the production of important chemicals as well as drug delivery systems and sensors.
The thermally induced shape-memory effect of polymers is typically characterized by cyclic uniaxial thermomechanical tests. Here, a molecular-dynamics (MD) simulation approach of such a cyclic uniaxial thermomechanical test is presented for amorphous switching domains of poly(L-lactide) (PLLA). Uniaxial deformation of the constructed PLLA models is simulated with a Parinello-Rahman scheme, as well as a pragmatic geometrical approach. We are able to describe two subsequent test cycles using the presented simulation approach. The obtained simulated shape-memory properties in both test cycles are similar and independent of the applied deformation protocols. The simulated PLLA shows high shape fixity ratios (Rf 94%), but only a moderate shape recovery ratio is obtained (Rr 30%). Finally, the structural changes during the simulated test are characterized by analysis of the changes in the dihedral angle distributions.
Herein, we report the synthesis of two phenylaza-[18]crown-6 lariat ethers with a coumarin fluorophore (1 and 2) and we reveal that compound 1 is an excellent probe for K+ ions under simulated physiological conditions. The presence of a 2-methoxyethoxy lariat group at the ortho position of the anilino moiety is crucial to the substantially increased stability of compounds 1 and 2 over their lariat-free phenylaza-[18] crown-6 ether analogues. Probe 1 shows a high K+/Na+ selectivity and a 2.5-fold fluorescence enhancement was observed in the presence of 100 mm K+ ions. A fluorescent membrane sensor, which was prepared by incorporating probe 1 into a hydrogel, showed a fully reversible response, a response time of 150 s, and a signal change of 7.8% per 1 mm K+ within the range 1-10 mm K+. The membrane was easily fabricated (only a single sensing layer on a solid polyester support), yet no leaching was observed. Moreover, compound 1 rapidly permeated into cells, was cytocompatible, and was suitable for the fluorescent imaging of K+ ions on both the extracellular and intracellular levels.
The new N-heterocyclic carbene (NHC) precursors 4,5-dicyano-1, -dimesityl- (9) and 4, 5-dicyano-1, 3-dineopentyl-2-(pentafluorophenyl)imidazoline (14) were synthesized. 9 could be determined by X-ray crystallography. With the 2-pentafluorophenyl-substituted imidazolines 9 and 14, the [AgCl(NHC)], [RhCl(COD)(NHC)], and [RhCl(CO)(2)(NHC)] complexes [NHC = 4, 5-dicyano-1, 3-dimesitylimidazol-2-ylidene (3) and 4, 5-dicyano-1, 3-dineopentylimidazol-2-ylidene (4)] were obtained. Crystal structures of [AgCl(3)] (15), [RhCl(COD)(3)] (17), [RhCl(COD)(4)] (18), and [RhCl(CO)(2)(3)] (19) were solved and with the crystal data of 19, the percent buried volume (%V-bur) of 31.8(+/- 0.1)% was determined for NHC 3. Infrared spectra of the imidazolines 9 and 14 and of the complexes 15-20 were recorded and the CO stretching frequencies of complexes 19 and 20 were used to determine the 3 ( (-1)) and 4 ( (-1)), thus proving that 1, 3-substitution of maleonitrile-NHCs does not have a significant effect for the high -acceptor strength of these carbenes.
We have synthesized a set of new unsaturated macrocyclic dithioethers with an increasing number of flexible methylene units 1-7 (Scheme 2) to investigate the correlation between the ring size of these ligands, the chelation effect and the consequences for an efficient PdCl2 coordination. The dithioethers 1-7 and the complex [PdCl2(4)]center dot CHCl3 were characterized by X-ray diffraction analysis. The crystal structures of 1-7 show that 2-7 are better preorganized chelating ligands for an exocyclic PdCl2 coordination than 1. The chelation effect of 1-7, the orientation of the sulfur atoms and the S center dot center dot center dot S donor distances, are influenced by the flexibility of the methylene units. In this series the unsaturated macrocyclic ligands 5 and 6 are the best chelating ligands for an efficient PdCl2 coordination. Comparative solvent extraction experiments with mn-12S(2)O(2) (mn = maleonitrile) reveal that the low interface activity of the new ligands reduces the extraction rate. However, a comparison with open-chain dithiomaleonitriles shows the impact of the macrocyclic effect of 4 and 5 on the extraction yield.
In a systematic approach we synthesized a new series of fluorescent probes incorporating donoracceptor (D-A) substituted 1,2,3-triazoles as conjugative -linkers between the alkali metal ion receptor N-phenylaza-[18]crown-6 and different fluorophoric groups with different electron-acceptor properties (4-naphthalimide, meso-phenyl-BODIPY and 9-anthracene) and investigated their performance in organic and aqueous environments (physiological conditions). In the charge-transfer (CT) type probes 1, 2 and 7, the fluorescence is almost completely quenched by intramolecular CT (ICT) processes involving charge-separated states. In the presence of Na+ and K+ ICT is interrupted, which resulted in a lighting-up of the fluorescence in acetonitrile. Among the investigated fluoroionophores, compound 7, which contains a 9-anthracenyl moiety as the electron-accepting fluorophore, is the only probe which retains light-up features in water and works as a highly K+/Na+-selective probe under simulated physiological conditions. Virtually decoupled BODIPY-based 6 and photoinduced electron transfer (PET) type probes 35, where the 10-substituted anthracen-9-yl fluorophores are connected to the 1,2,3-triazole through a methylene spacer, show strong ion-induced fluorescence enhancement in acetonitrile, but not under physiological conditions. Electrochemical studies and theoretical calculations were used to assess and support the underlying mechanisms for the new ICT and PET 1,2,3-triazole fluoroionophores.
In this paper, we report simulations of laser-driven many-electron dynamics by means of the time-dependent configuration interaction singles (TD-CIS) approach. Photoionization is included by a heuristic model within calculations employing standard Gaussian basis sets. Benzo[g]-N-methyl-quinolinium-7-hydroxylate (BMQ7H) serves as a test system to generate predefined wave packets, i.e. a superposition between the ground and fifth excited state, in a large molecule. For this molecule, these two states have a very similar geometry, which enables us to use the fixed nuclei approximation. Furthermore, this geometric stability would also prevent a dephasing of the electron wave packet due to nuclear dynamics in an experimental realization of our simulations. We also simulate the possible detection of such a wave packet by ultra short probe laser pulses, i.e. pump-probe spectra.
Sugar-based molecules and polysaccharide biomass can be turned into porous functional carbonaceous products at comparably low temperatures of 400 °C under a nitrogen atmosphere in the presence of an ionic liquid (IL) or a poly(ionic liquid) (PIL). The IL and PIL act as "activation agents" with own structural contribution, and effectively promote the conversion and pore generation in the biomaterials even at a rather low doping ratio (7 wt%). In addition, this "induced carbonization" and pore forming phenomenon enables the preservation of the biotemplate shape to the highest extent and was employed to fabricate shaped porous carbonaceous materials from carbohydrate-based biotemplates, exemplified here with cellulose filter membranes, coffee filter paper and natural cotton. These carbonized hybrids exhibit comparably good mechanical properties, such as bendability of membranes or shape recovery of foams. Moreover, the nitrogen atoms incorporated in the final products from the IL/PIL precursors further improve the oxidation stability in the fire-retardant tests.
Sugar-based molecules and polysaccharide biomass can be turned into porous functional carbonaceous products at comparably low temperatures of 400 degrees C under a nitrogen atmosphere in the presence of an ionic liquid (IL) or a poly(ionic liquid) (PIL). The IL and PIL act as "activation agents" with own structural contribution, and effectively promote the conversion and pore generation in the biomaterials even at a rather low doping ratio (7 wt%). In addition, this "induced carbonization" and pore forming phenomenon enables the preservation of the biotemplate shape to the highest extent and was employed to fabricate shaped porous carbonaceous materials from carbohydrate-based biotemplates, exemplified here with cellulose filter membranes, coffee filter paper and natural cotton. These carbonized hybrids exhibit comparably good mechanical properties, such as bendability of membranes or shape recovery of foams. Moreover, the nitrogen atoms incorporated in the final products from the IL/PIL precursors further improve the oxidation stability in the fire-retardant tests.
A polymer analogous reaction for the formation of imidazolium and NHC based porous polymer networks
(2013)
A polymer analogous reaction was carried out to generate a porous polymeric network with N-heterocyclic carbenes (NHC) in the polymer backbone. Using a stepwise approach, first a polyimine network is formed by polymerization of the tetrafunctional amine tetrakis(4-aminophenyl)methane. This polyimine network is converted in the second step into polyimidazolium chloride and finally to a polyNHC network. Furthermore a porous Cu(II)-coordinated polyNHC network can be generated. Supercritical drying generates polymer networks with high permanent surface areas and porosities which can be applied for different catalytic reactions. The catalytic properties were demonstrated for example in the activation of CO2 or in the deoxygenation of sulfoxides to the corresponding sulfides.
Molecular rods consisting of a hydrophobic backbone and terminally varying functional groups have been synthesized for applications for the functionalization of membranes. In the present study, we employ a spin-labeled analogue of a recently described new class of molecular rods to characterize their dynamic interactions with membranes. By using the different approaches of ESR and NMR spectroscopy, we show that the spin moiety of the membrane-embedded spin-labeled rod is localized in the upper chain/glycerol region of membranes of different compositions. The rod is embedded within the membrane in a tilted orientation to adjust for the varying hydrophobic thicknesses of these bilayers. This orientation does not perturb the membrane structure. The water solubility of the rod is increased significantly in the presence of certain cyclodextrins. These cyclodextrins also allow the rods to be extracted from the membrane and incorporated into preformed membranes. The latter will improve the future applications of these rods in cellular systems as stable membrane-associated anchors for the functionalization of membrane surfaces.
Acetanilides can be deacetylated and diazotized in situ, and subsequently used in Pd-catalyzed coupling reactions without isolation of the diazonium intermediate. Heck reactions, Suzuki cross-coupling reactions, and a Pd-catalyzed [2+2+1]cycloaddition have been investigated as terminating CC bond-forming steps of this one-flask sequence. The sequence does not require the exchange of solvents or removal of by-products between the individual steps, but proceeds by addition of reagents and catalysts in due course.
Experimental results indicated the contact angles in the drops of Janus emulsions formed in a one-step mixing process to be invariant within a significant range the oil volume ratios, similar to the results from microfluidics emulsification. Since this result points to a connection between the kinetically formed emulsions and the local equilibrium topology of emulsion drops, the effect of interfacial tensions on the morphology of Janus emulsions was estimated from the equilibrium interfacial tensions at the line of contact. Realistic values of the tensions revealed the limited range of these to obtain Janus drops and also offered correlation between the equilibrium entities and the curvature of the interface between the two oils.
Six-color time-resolved forster resonance energy transfer for ultrasensitive multiplexed biosensing
(2013)
Simultaneous monitoring of multiple molecular interactions and multiplexed detection of several diagnostic biomarkers at very low concentrations have become important issues in advanced biological and chemical sensing. Here we present an optically multiplexed six-color Forster resonance energy transfer (FRET) biosensor for simultaneous monitoring of five different individual binding events. We combined simultaneous FRET from one Tb complex to five different organic dyes measured in a filter-based time-resolved detection format with a sophisticated spectral crosstalk correction, which results in very efficient background suppression. The advantages and robustness of the multiplexed FRET sensor were exemplified by analyzing a 15-component lung cancer immunoassay involving 10 different antibodies and five different tumor markers in a single 50 mu L human serum sample. The multiplexed biosensor offers clinically relevant detection limits in the low picomolar (ng/mL) concentration range for all five markers, thus providing an effective early screening tool for lung cancer with the possibility of distinguishing small-cell from non-small-cell lung carcinoma. This novel technology will open new doors for multiple biomarker diagnostics as well as multiplexed real-time imaging and spectroscopy.
In the oxidative system (t-BuOCl+NaI) trifluoromethanesulfonamide is regio- and stereoselectively added to only one double bond of cyclopentadiene and 1,3-cyclohexadiene giving rise to 1,1,1-trifluoro-N-(5-iodocyclopent-2-en-1-yl)methanesulfonamide 7 and trans-N,N'-cyclohex-3-en-1,2-diylbis(1,1,1-trifluoromethanesulfonamide) 8. The structure of 7 and 8 was determined by X-ray, NMR, and MS. With 1,4-cyclohexadiene, addition to both double bonds occurs with the formation of N,N'-(4-chloro-5-iodocyclohexan-1,2-diyl)bis(1,1,1-trifluoromethanesulfonamide) 9. Under the action of sodium iodide in acetone, the latter product undergoes halogenophilic attack with the reduction of the CHI group and elimination of HCl to give trans-N,N'-cyclohex-4-en-1,2-diylbis(1,1,1-trifluoromethanesulfonamide) 10, whose structure was also determined by X-ray analysis. 1,3,5-Cycloheptatriene under these conditions is oxidized to benzaldehyde and does not react with trifluoromethanesulfonamide.
Transcriptome analysis through next-generation sequencing technologies allows the generation of detailed gene catalogs for non-model species, at the cost of new challenges with regards to computational requirements and bioinformatics expertise. Here, we present TRAPID, an online tool for the fast and efficient processing of assembled RNA-Seq transcriptome data, developed to mitigate these challenges. TRAPID offers high-throughput open reading frame detection, frameshift correction and includes a functional, comparative and phylogenetic toolbox, making use of 175 reference proteomes. Benchmarking and comparison against state-of-the-art transcript analysis tools reveals the efficiency and unique features of the TRAPID system.
Effect of ionic strength and layer number on swelling of polyelectrolyte multilayers in water vapour
(2013)
The swelling behavior of polyelectrolyte multilayers (PEMs) of poly(sodium-4 styrene sulfonate) (PSS) and poly(diallyl dimethyl ammonium chloride) (PDADMAC) prepared from aqueous solution of 0.1 M and 0.5 M NaCl are investigated by ellipsometry and Atomic Force Microscopy (AFM). From 1 double-layer up to 4 double-layers of 0.1 M NaCl, the amount of swelling water in the PEMs decreases with increasing number of adsorbed double layers due to an increase in polyelectrolyte density as a result of the attraction between the positively charged outermost PDADMAC layer and the Si substrate. From 6 double layers to 30 double layers, the attraction is reduced due to a much larger distance between substrate and outermost layer leading to a much lower polyelectrolyte density and higher swelling water. In PEMs prepared from aqueous solution of 0.5 M NaCl, the amount of water constantly increases which is related to a monotonically decreasing polyelectrolyte density with increasing number of polyelectrolyte layers. Studies of the surface topology also indicate a transition from a more substrate affected interphase behavior to a continuum properties of the polyelectrolyte multilayers. The threshold for the transition from interphase to continuum behavior depends on the preparation conditions of the PEM.
Fluorescent gold clusters synthesized in a poly(ethyleneimine) modified reverse microemulsion
(2013)
This paper is focused on the formation of gold clusters in a tailor-made polyelectrolyte-modified reverse microemulsion using poly(ethyleneimine) (PEI) as a cationic polyelectrolyte. PEI incorporated into a ternary w/o microemulsion consisting of water/heptanol/zwitterionic surfactant 3-(N,N-dimethyl-dodecylammonio)-propanesulfonate (SB) acts as a reducing and stabilizing agent and shows an additional template effect. The nanoparticle synthesis is performed by a simple mixing of two microemulsions, one containing the PEI and the other one containing the gold chloride precursor. UV-vis measurements in the microemulsion show two pronounced absorption maxima, one at 360 nm and the other one at 520 nm, indicating two particle fractions. The absorption maximum at 360 nm in combination to the unique fluorescence properties indicate the formation of gold clusters. After a complete solvent evaporation the redispersed nanoparticles have been characterized by using UV-vis and fluorescence spectroscopy, in combination to dynamic light scattering and transmission electron microscopy (TEM). In addition to the gold nanoparticle fraction (>5 nm) the fluorescent gold cluster fraction (<2 nm) can be redispersed without particle aggregation. By means of asymmetric flow field flow fractionation (AF-FFF) two different cluster fractions with particle diameter (<2 nm) can be identified.
A homogeneous time-resolved luminescence resonance energy transfer (TR-LRET) assay has been developed to quantify proteins. The competitive assay is based on resonance energy transfer (RET) between two luminescent nanosized particles. Polystyrene nanoparticles loaded with Eu3+ chelates (EuNPs) act as donors, while protein-coated quantum dots (QDs), either CdSe/ZnS emitting at 655 nm (QD655-strep) or CdSeTe/ZnS with emission wavelength at 705 nm (QD705-strep), are acceptors. In the absence of analyte protein, in our case bovine serum albumin (BSA), the protein-coated QDs bind nonspecifically to the EuNPs, leading to RET. In the presence of analyte proteins, the binding of the QDs to the EuNPs is prevented and the RET signal decreases. RET from the EuNPs to the QDs was confirmed and characterized with steady-state and time-resolved luminescence spectroscopy. In accordance with the Forster theory, the approximate average donor acceptor distance is around 15 nm at RET efficiencies, equal to 15% for QD655 and 13% for QD705 acceptor, respectively. The limits of detection are below 10 ng of BSA with less than a 10% average coefficient of variation. The assay sensitivity is improved, when compared to the most sensitive commercial methods. The presented mix-and-measure method has potential to be implemented into routine protein quantification in biological laboratories.
An asymmetric variant of the dehydro-Diels-Alder (DDA) reaction has been developed and applied in the atropselective synthesis of various (1,5)naphthalenophanes. Whereas the suitability of the photochemically induced DDA (PDDA) was limited, the thermally induced DDA provided the desired product, depending on the chiral auxiliary used and the length of the linker, with nearly perfect stereoselectivity. Furthermore, the mechanism of the DDA was investigated by means of DFT calculations, and a stepwise mechanism involving 1,4-biradicals was suggested.
Fluoreszenzfarbstoffe mit Dioxolobenzodioxol-Grundgerüst: Synthese, Untersuchungen und Anwendungen
(2013)
Standard quantum chemical methods are used for accurate calculation of thermochemical properties such as enthalpies of formation, entropies and Gibbs energies of formation. Equilibrium reactions are widely investigated and experimental measurements often lead to a range of reaction Gibbs energies and equilibrium constants. It is useful to calculate these equilibrium properties from quantum chemical methods in order to address the experimental differences. Furthermore, most standard calculation methods differ in accuracy and feasibility of the system size. Hence, asystematic comparison of equilibrium properties calculated with different numerical algorithms would provide a useful reference. We select two well-known gas phase equilibrium reactions with small molecules: covalent dimer formation of NO2 (2NO(2) reversible arrow N2O4) and the synthesis of NH3 (N-2 + 3 H-2 reversible arrow 2NH(3)). We test four quantum chemical methods denoted by G3B3, CBS-APNO, W1 and CCSD(T) with aug-cc-pVXZ basis sets (X = 2, 3, and 4), to obtain thermochemical data for NO2, N2O4, and NH3. The calculated standard formation Gibbs energies Delta(f)G degrees are used to calculate standard reaction Gibbs energies Delta(r)G degrees and standard equilibrium constants K-eq for the two reactions. Standard formation enthalpies Delta H-f degrees are calculated in a more reliable way using high-level methods such as W1 and CCSD(T). Standard entropies S degrees for the molecules are calculated well within the range of experiments for all methods, however, the values of standard formation Gibbs energies Delta(f)G degrees show some dependence on the choice of the method. High-level methods perform better for the calculation of molecular energies, however, simpler methods such as G3B3 and CBS-APNO perform quite well in the calculation of total reaction energies and equilibrium constants, provided that the chemical species involved do not exhibit molecular geometries that are difficult to handle by the applied method. The temperature dependence of standard reaction Gibbs energy Delta(r)G degrees for the NH3 reaction is discussed by using the calculated standard formation Gibbs energies Delta(f)G degrees of the reaction species at 298.15 K. The corresponding equilibrium constant K-eq as a function of temperature is found to be close to experimental values.
The present paper is related to interactions between strongly alternating polyampholytes, i.e., copolymers of N,N'-diallyl-N,N'-dimethylammonium chloride and maleamic acid derivatives, varying in hydrophobicity and excess charges and the oppositely charged anionic surfactant sodium dodecyl sulfate (SDS). Surface tension measurements have revealed a complex behavior with the formation of polyampholyte-SDS complexes at water air interfaces which depends on both the hydrophobic character of the polyampholyte and electrostatic attractive forces between the polyampholyte and the anionic surfactant in dependence on pH. Hereby, maleamic acid copolymers with additional carboxylic groups in the phenylic side chain show a significant lower surface tension at the critical association concentration (CAC) due to the formation of surface-active SDS complexes and multicomplexes. In the presence of only one carboxylic group in the p-position the CAC can be strongly shifted by varying the pH due to repulsive electrostatic interactions.
In many biological and environmental applications spatially resolved sensing of molecular oxygen is desirable. A powerful tool for distributed measurements is optical time domain reflectometry (OTDR) which is often used in the field of telecommunications. We combine this technique with a novel optical oxygen sensor dye, triangular-[4] phenylene (TP), immobilized in a polymer matrix. The TP luminescence decay time is 86 ns. The short decay time of the sensor dye is suitable to achieve a spatial resolution of some meters. In this paper we present the development and characterization of a reflectometer in the UV range of the electromagnetic spectrum as well as optical oxygen sensing with different fiber arrangements.
1,2-Diketones were synthesized from styrenes by combining a cross metathesis and a Ru-catalyzed alkene oxidation to an assisted tandem catalytic sequence. The synthesis relies on the use of just one metathesis precatalyst, which was in situ converted to the oxidation catalyst by addition of an alkyl hydroperoxide as a chemical trigger and oxidant. The one-flask sequence can be extended beyond 1,2-diketones to quinoxalines, by condensation of the oxidation products with ortho-phenylenediamine.
Laser-based ion mobility (IM) spectrometry was used for the detection of neuroleptics and PAH. A gas chromatograph was connected to the IM spectrometer in order to investigate compounds with low vapour pressure. The substances were ionized by resonant two-photon ionization at the wavelengths lambda = 213 and 266 nm and pulse energies between 50 and 300 mu J. Ion mobilities, linear ranges, limits of detection and response factors are reported. Limits of detection for the substances are in the range of 1-50 fmol. Additionally, the mechanism of laser ionization at atmospheric pressure was investigated. First, the primary product ions were determined by a laser-based time-of-flight mass spectrometer with effusive sample introduction. Then, a combination of a laser-based IM spectrometer and an ion trap mass spectrometer was developed and characterized to elucidate secondary ion-molecule reactions that can occur at atmospheric pressure. Some substances, namely naphthalene, anthracene, promazine and thioridazine, could be detected as primary ions (radical cations), while other substances, in particular acridine, phenothiazine and chlorprothixene, are detected as secondary ions (protonated molecules). The results are interpreted on the basis of quantum chemical calculations, and an ionization mechanism is proposed.
The detection of hydrogen sulfide (H2S) by 2 + 1 resonance-enhanced multi-photon ionization (REMPI) and the application of H2S as a laser dopant for the detection of polar compounds in laser ion mobility (IM) spectrometry at atmospheric pressure were investigated. Underlying ionization mechanisms were elucidated by additional studies employing a drift cell interfaced to a time-of-flight mass spectrometer. Depending on the pressure, the primary ions H2S+, HS+, S+, and secondary ions, such as H3S+, were observed. The 2 + 1 REMPI spectrum of H2S near lambda = 302.5 nm was recorded at atmospheric pressure. Furthermore, the limit of detection and the linear range were established. In the second part of the work, H2S was investigated as an H2O analogous laser dopant for the ionization of polar substances by proton transfer. H2S exhibits a proton affinity (PA) similar to that of H2O, but a significantly lower ionization energy facilitating laser ionization. Ion-molecule reactions (IMR) of H3S+ with a variety of polar substances with PA between 754.6 and 841.6 kJ/mol were investigated. Representatives of different compound classes, including alcohols, ketones, esters, and nitroaromatics were analyzed. The IM spectra resulting from IMR of H3S+ and H3O+ with these substances are similar in structure, i.e., protonated monomer and dimer ion peaks are found depending on the analyte concentration.
Sulfonated polyanilines have become promising building blocks in the construction of biosensors, and therefore we use here differently substituted polymer forms to investigate the role of their structural composition and properties in achieving a direct electron transfer with the redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH). To this end, new copolymers containing different ratios of 2-methoxyaniline-5-sulfonic acid (MAS), 3-aminobenzenesulfonic acid (ABS) and 3-aminobenzoic acid (AB) units have been chemically synthesized. All polymers have been studied with respect to their ability to react directly with PQQ-GDH. This interaction has been monitored initially in solution, and subsequently on electrode surfaces. The results show that only copolymers with MAS and aniline units can directly react with PQQ-GDH in solution; the background can be mainly ascribed to the emeraldine salt redox state of the polymer, allowing rather easy reduction. However, when polymers and the enzyme are immobilized on the surface of carbon nanotube-containing electrodes, direct bioelectrocatalysis is also feasible in the case of copolymers composed of ABS/AB and MAS/AB units, existing initially in pernigraniline base form. This verifies that a productive interaction of the enzyme with differently substituted polymers is feasible when the electrode potential can be used to drive the reaction towards the oxidation of the substrate-reduced enzyme. These results clearly demonstrate that enzyme electrodes based on sulfonated polyanilines and direct bioelectrocatalysis can be successfully constructed.
Nicotinamide (nia) has been employed as a supramolecular reagent in the synthesis of four copper(II) chloro- and dichlorobenzoate (Clbz/Cl(2)bz) complexes. The structures of the compounds [Cu(2-Clbz)(2) (nia)(2)(H2O)(2)] (1), icu(4-clbz)(2)(nia)(2)(H2O)(2)] (2), [Cu(3,5-Cl(2)bz)(2)(nia)(2)(H2O)(2)] (3), and [Cu(2,5-Cl(2)bz)(2) (nia)(2)(H2O)]center dot H2O (4) were determined. All the investigated compounds 1-4 reveal water molecules as coordinated. Their structures show distorted octahedral chromophores (CuN2O2O)-N-II'(2), though some are better described as square-planar or square-pyramid due to a large deviation of the axial ligand away from the octahedral z-axis along with different Cu center dot center dot center dot O (axial) lengths. The equatorial positions are occupied in all four cases by two nitrogen (nia-py) atoms and two carboxylate oxygen atoms of two Clbz/Cl(2)bz ligands, while the axial positions are occupied by water molecules. The EPR spectra reveal for all 1-4 compounds a spin state of S = 1/2, mostly with axial symmetry of the spectra. Their resolution is clearly dependant to the crystal symmetry related equivalence of the magnetic sites. The coordination molecules of all compounds are connected by N-H center dot center dot center dot O and O-H center dot center dot center dot O H-bonds from nicotinamide NH2 groups, carboxylate anions and/or water molecules, which create supramolecular chains or further H-bonded into 2D sheets. Steric hindering of the chlorine atoms of the Clbz/Cl(2)bz, especially seen at the coordination of the water molecules, demonstrates its role at the coordination sphere appearance. Despite this influence, the water molecules in 1-4 always assist at the similar supramolecular H-bonded network, almost at the same manner.
User-friendly protocols for the protecting group-free synthesis of 2,2'-biphenols via Suzuki-Miyaura coupling of o-halophenols and o-boronophenol are presented. The reactions proceed in water in the presence of simple additives such as K2CO3, KOH, KF, or TBAF and with commercially available Pd/C as precatalyst. Expensive or laboriously synthesized ligands or other additives are not required. In the case of bromophenols, efficient rate acceleration and short reaction times were accomplished by microwave irradiation.
Stereoselective synthesis of dienyl phosphonates via extended tethered ring-closing metathesis
(2013)
Allylphosphonates of allylic alcohols were converted to conjugated dienyl phosphonates in a one-flask reaction, comprising a ring-closing metathesis (RCM), a base-induced ring-opening, and an alkylation. The ring-opening proceeds with very high diastereoselectivity, giving exclusively the (1Z,3E)-configured dienes. Single diastereomers and mixtures of diastereomers can be used as starting materials without noticeable effect on the diastereoselectivity of the sequence.
The adsorption of boron (boric acid) from aqueous solutions on alumina has been investigated at pH 8.0, I=0.1M NaClO4, T=22 +/- 3 degrees C, and under normal atmospheric conditions. The characterization of the adsorbed species was performed by Raman spectroscopy and the spectroscopic speciation was assisted by theoretical DFT calculations. Evaluation of the spectroscopic data points to the formation of inner-sphere surface complexes and indicates the formation of two different types of adsorbed boron species. The theoretical calculations corroborate the spectroscopic data and indicate that at low boron concentration the monodentate surface species dominates, whereas increased boron concentration favors the formation of a bidentate surface species. Assuming low coverage, the conditional formation constant for the monodentate surface species has been evaluated to be log=4.1 +/- 0.1.
Awards
(2013)
An amphiphilic linear ternary block copolymer was synthesised in three consecutive steps via reversible addition-fragmentation chain transfer polymerisation. Oligo(ethylene glycol) monomethyl ether acrylate was engaged as a hydrophilic building block, while benzyl acrylate and 3-tris(trimethylsiloxy)silyl propyl acrylate served as hydrophobic building blocks. The resulting "triphilic" copolymer consists thus of a hydrophilic (A) and two mutually incompatible "soft" hydrophobic blocks, namely, a lipophilic (B) and a silicone-based (C) block, with all blocks having glass transition temperatures well below 0 A degrees C. The triphilic copolymer self-assembles into spherical multicompartment micellar aggregates in aqueous solution, where the two hydrophobic blocks undergo local phase separation into various ultrastructures as evidenced by cryogenic transmission electron microscopy. Thus, a silicone-based polymer block can replace the hitherto typically employed fluorocarbon-based hydrophobic blocks in triphilic block copolymers for inducing multicompartmentalisation.