Refine
Year of publication
- 2021 (129) (remove)
Document Type
- Article (84)
- Doctoral Thesis (26)
- Postprint (16)
- Monograph/Edited Volume (1)
- Habilitation Thesis (1)
- Master's Thesis (1)
Is part of the Bibliography
- yes (129)
Keywords
- PHREEQC (5)
- reactive transport (4)
- ALOS World 3D (2)
- ASTER GDEM (2)
- Alpen (2)
- Alps (2)
- Arctic Ocean (2)
- Argentina (2)
- Argentinien (2)
- Big Naryn complex (2)
Institute
- Institut für Geowissenschaften (129) (remove)
The present work gives a detailed analysis of the metamorphic and structural evolution of the back-arc portion of the Famatinian Orogen exposed in the southern Sierra de Aconquija (Cuesta de La Chilca segment) in the Sierras Pampeanas Orientales (Eastern Pampean Sierras). The Pampeanas Orientales include from north to south the Aconquija, Ambato and Ancasti mountains. They are mainly composed of middle to high grade metasedimentary units and magmatic rocks.
At the south end of the Sierra de Aconquija, along an east to west segment extending over nearly 10 km (Cuesta de La Chilca), large volumes of metasedimentary rocks crop out. The eastern metasediments were defined as members of the El Portezuelo Metamorphic-Igneous Complex (EPMIC) or Eastern block and the western ones relate to the Quebrada del Molle Metamorphic Complex (QMMC) or Western block. The two blocks are divided by the La Chilca Shear Zone, which is reactivated as the Rio Chanarito fault.
The EPMIC, forming the hanging wall, is composed of schists, gneisses and rare amphibolites, calc- silicate schists, marbles and migmatites. The rocks underwent multiple episodes of deformation and a late high strain-rate episode with gradually increasing mylonitization to the west. Metamorphism progrades from a M-1 phase to the peak M-3, characterized by the reactions: Qtz + Pl + Bt +/- Ms -> Grt + Bt(2) + Pl(2) +/- Sil +/- Kfs, Qtz + Bt + Sil -> Crd + Kfs and Qtz + Grt + Sil -> Crd. The M-3 assemblage is coeval with the dominant foliation related to a third deformational phase (D-3).
The QMMC, forming the foot wall, is made up of fine-grained banded quartz - biotite schists with quartz veins and quartz-feldspar-rich pegmatites. To the east, schists are also overprinted by mylonitization. The M-3 peak assemblage is quartz + biotite + plagioclase +/- garnet +/- sillimanite +/- muscovite +/- ilmenite +/- magnetite +/- apatite.
The studied segment suffered multiphase deformation and metamorphism. Some of these phases can be correlated between both blocks. D-1 is locally preserved in scarce outcrops in the EPMIC but is the dominant in the QMMC, where S-1 is nearly parallel to S-0. In the EPMIC, D-2 is represented by the S-2 foliation, related to the F-2 folding that overprints S-1, with dominant strike NNW - SSE and high angles dip to the E. D-3 in the EPMIC have F-3 folds with axis oblique to S-2; the S-3 foliation has striking NW - SE dipping steeply to the E or W and develops interference patterns. In the QMMC, S-2 (D-2) is a discontinuous cleavage oblique to S-1 and transposed by S-3 (D-3), subparallel to S-1. Such structures in the QMMC developed at subsolidus conditions and could be correlated to those of the EPMIC, which formed under higher P-T conditions. The penetrative deformation D-2 in the EPMIC occurred during a prograde path with syntectonic growth of garnet reaching P-T conditions of 640 degrees C and 0.54 GPa in the EPMIC. This stage was followed by a penetrative deformation D-3 with syn-kinematic growth of garnet, cordierite and plagioclase. Peak P-T conditions calculated for M-3 are 710 degrees C and 0.60 GPa, preserved in the western part of the EPMIC, west of the unnamed fault.
The schists from the QMMC suffered the early low grade M-1 metamorphism with minimum PT conditions of ca 400 degrees C and 0.35 GPa, comparable to the fine schists (M-1) outcropping to the east. The D-2 deformation is associated with the prograde M-2 metamorphism. The penetrative D-3 stage is related to a medium grade metamorphism M-3, with peak conditions at ca 590 degrees C and 0.55 GPa.
The superimposed stages of deformation and metamorphism reaching high P-T conditions followed by isothermal decompression, defining a clockwise orogenic P-T path. During the Lower Paleozoic, folds were superimposed and recrystallization as well as partial melting at peak conditions occurred. Similar characteristics were described from the basement from other Famatinian-dominated locations of the Sierra de Aconquija and other ranges of the Sierras Pampeanas Orientales.
En el presente trabajo se realizó una investigación multidisciplinaria combinando métodos de geomorfología tectónica con estudios geofisicos y estructurales, focalizados principalmente en la caracterización neotectónica de ambos faldeos de la sierra de La Candelaria y del extremo sur de la cuenca de Metán. La zona de estudio se encuentra ubicada en la región limítrofe entre las provincias de Salta y Tucumán y pertenece a la provincia geológica del Sistema Santa Bárbara.
El principal objetivo consistió en contextualizar las evidencias de actividad tectónica cuaternaria de la región mediante la propuesta de un modelo estructural novedoso, con el propósito de incrementar la información disponible sobre estructuras neotectónicas y su potencial sismogénico. Con este fin, se aplicaron e integraron diversas técnicas tales como la interpretación de líneas sísmicas de reflexión, construcción de secciones estructurales balanceadas, y métodos geofísicos someros, para constatar el comportamiento en profundidad tanto de las estructuras geológicas identificadas en superficie como de las posibles fallas ciegas corticales involucradas.
En primer lugar, se realizó un relevamiento regional del área de estudio empleando imágenes satelitales multiespectrales LANDSAT y SENTINEL 2, que permitieron reconocer diferentes niveles de abanicos aluviales y terrazas fluviales cuaternarios. Mediante la determinación de diferentes indicadores morfométricos en modelos de elevación digital (MED), junto con observaciones de campo, fue posible identificar evidencias de deformación sobre dichos niveles cuaternarios que han sido relacionadas genéticamente con cuatro fallas neotectónicas. Tres de ellas (fallas Arias, El Quemado y Copo Quile) fueron seleccionadas para efectuar estudios de mayor detalle por medio de la aplicación de métodos de geofísica somera (tomografía eléctrica resistiva (ERT) y tomografía sísmica de refracción Sísmica (SRT)), que permitieron corroborar su existencia en profundidad, realizar inferencias geométricas y cinemáticas, y estimar la magnitud de la deformación reciente. Las fallas Arias y El Quemado fueron interpretadas como fallas inversas relacionadas con deslizamiento flexural interstratal, mientras que la falla Copo Quile se interpretó como una falla inversa ciega de bajo ángulo.También se realizó una interpretación conjunta de líneas sísmicas de reflexión y pozos exploratorios pertenecientes a áreas hidrocarburíferas de las cuencas de Choromoro y Metán con el fin de contextualizar las principales estructuras reconocidas en el marco estratigráfico y tectónico regional. Toda la información fue integrada en una sección estructural balanceada mediante técnicas de modelado cinemático. Dicho modelo permite inferir que la deformación cuaternaria reconocida está relacionada al desplazamiento del basamento a lo largo de un corrimiento ciego, responsable del levantamiento de la sierra de La Candelaria y el cerr Cantero. Asimismo, el modelo cinemático permite interpretar la ubicación aproximada de los principales niveles de despegue que controlan el estilo de deformación. El nivel de despegue más somero, que controla la deformación de la cobertura sedimentaria se encuentra a 4 km de profundidad, a 21 km se estima la presencia de otra zona de cizalla subhorizontal dentro del basamento.
Finalmente, a partir de la integración de todos los resultados obtenidos, se evaluó el potencial sismogénico de las fallas en la zona de estudio. Las fallas de primer orden que controlan la deformación en la zona son las responsables de los grandes terremotos. Mientras, las fallas Cuaternarias flexodeslizantes e inversas afectan solamente a la cobertura sedimentaria y serían estructuras de segundo orden que acomodan la deformación y fueron activadas durante el cuaternario con movimientos asísmicos y/o sísmicos de muy baja magnitud.
Estos resultados permiten inferir que el corrimiento La Candelaria constituye una fuente sismogénica potencial de importancia para la región, donde se ubican numerosas poblaciones y obras civiles de envergadura. Por otra parte, la sección estructural balanceada implica la presencia de otras fallas ciegas de distinto orden de magnitud que podrían ser posibles fuentes sismogénicas profundas adicionales, marcando la necesidad de continuar con el desarrollo de este tipo de estudios en esta región tectónicamente activa.
The Eastern Mediterranean is the most seismically active region in Europe due to the complex interactions of the Arabian, African, and Eurasian tectonic plates. Deformation is achieved by faulting in the brittle crust, distributed flow in the viscoelastic lower-crust and mantle, and Hellenic subduction, but the long-term partitioning of these mechanisms is still unknown. We exploit an extensive suite of geodetic observations to build a kinematic model connecting strike-slip deformation, extension, subduction, and shear localization across Anatolia and the Aegean Sea by mapping the distribution of slip and strain accumulation on major active geological structures. We find that tectonic escape is facilitated by a plate-boundary-like, translithospheric shear zone extending from the Gulf of Evia to the Turkish-Iranian Plateau that underlies the surface trace of the North Anatolian Fault. Additional deformation in Anatolia is taken up by a series of smaller-scale conjugate shear zones that reach the upper mantle, the largest of which is located beneath the East Anatolian Fault. Rapid north-south extension in the western part of the system, driven primarily by Hellenic Trench retreat, is accommodated by rotation and broadening of the North Anatolian mantle shear zone from the Sea of Marmara across the north Aegean Sea, and by a system of distributed transform faults and rifts including the rapidly extending Gulf of Corinth in central Greece and the active grabens of western Turkey. Africa-Eurasia convergence along the Hellenic Arc occurs at a median rate of 49.8mm yr(-1) in a largely trench-normal direction except near eastern Crete where variably oriented slip on the megathrust coincides with mixed-mode and strike-slip deformation in the overlying accretionary wedge near the Ptolemy-Pliny-Strabo trenches. Our kinematic model illustrates the competing roles the North Anatolian mantle shear zone, Hellenic Trench, overlying mantle wedge, and active crustal faults play in accommodating tectonic indentation, slab rollback and associated Aegean extension. Viscoelastic flow in the lower crust and upper mantle dominate the surface velocity field across much of Anatolia and a clear transition to megathrust-related slab pull occurs in western Turkey, the Aegean Sea and Greece. Crustal scale faults and the Hellenic wedge contribute only a minor amount to the large-scale, regional pattern of Eastern Mediterranean interseismic surface deformation.
The imagination of clearly separated core-shell structures is already outdated by the fact, that the nanoparticle core-shell structures remain in terms of efficiency behind their respective bulk material due to intermixing between core and shell dopant ions. In order to optimize the photoluminescence of core-shell UCNP the intermixing should be as small as possible and therefore, key parameters of this process need to be identified. In the present work the Ln(III) ion migration in the host lattices NaYF4 and NaGdF4 was monitored. These investigations have been performed by laser spectroscopy with help of lanthanide resonance energy transfer (LRET) between Eu(III) as donor and Pr(III) or Nd(III) as acceptor. The LRET is evaluated based on the Forster theory. The findings corroborate the literature and point out the migration of ions in the host lattices. Based on the introduced LRET model, the acceptor concentration in the surrounding of one donor depends clearly on the design of the applied core-shell-shell nanoparticles. In general, thinner intermediate insulating shells lead to higher acceptor concentration, stronger quenching of the Eu(III) donor and subsequently stronger sensitization of the Pr(III) or the Nd(III) acceptors. The choice of the host lattice as well as of the synthesis temperature are parameters to be considered for the intermixing process.
One third of the world's population lives in areas where earthquakes causing at least slight damage are frequently expected. Thus, the development and testing of global seismicity models is essential to improving seismic hazard estimates and earthquake-preparedness protocols for effective disaster-risk mitigation. Currently, the availability and quality of geodetic data along plate-boundary regions provides the opportunity to construct global models of plate motion and strain rate, which can be translated into global maps of forecasted seismicity. Moreover, the broad coverage of existing earthquake catalogs facilitates in present-day the calibration and testing of global seismicity models. As a result, modern global seismicity models can integrate two independent factors necessary for physics-based, long-term earthquake forecasting, namely interseismic crustal strain accumulation and sudden lithospheric stress release.
In this dissertation, I present the construction of and testing results for two global ensemble seismicity models, aimed at providing mean rates of shallow (0-70 km) earthquake activity for seismic hazard assessment. These models depend on the Subduction Megathrust Earthquake Rate Forecast (SMERF2), a stationary seismicity approach for subduction zones, based on the conservation of moment principle and the use of regional "geodesy-to-seismicity" parameters, such as corner magnitudes, seismogenic thicknesses and subduction dip angles. Specifically, this interface-earthquake model combines geodetic strain rates with instrumentally-recorded seismicity to compute long-term rates of seismic and geodetic moment. Based on this, I derive analytical solutions for seismic coupling and earthquake activity, which provide this earthquake model with the initial abilities to properly forecast interface seismicity. Then, I integrate SMERF2 interface-seismicity estimates with earthquake computations in non-subduction zones provided by the Seismic Hazard Inferred From Tectonics based on the second iteration of the Global Strain Rate Map seismicity approach to construct the global Tectonic Earthquake Activity Model (TEAM). Thus, TEAM is designed to reduce number, and potentially spatial, earthquake inconsistencies of its predecessor tectonic earthquake model during the 2015-2017 period. Also, I combine this new geodetic-based earthquake approach with a global smoothed-seismicity model to create the World Hybrid Earthquake Estimates based on Likelihood scores (WHEEL) model. This updated hybrid model serves as an alternative earthquake-rate approach to the Global Earthquake Activity Rate model for forecasting long-term rates of shallow seismicity everywhere on Earth.
Global seismicity models provide scientific hypotheses about when and where earthquakes may occur, and how big they might be. Nonetheless, the veracity of these hypotheses can only be either confirmed or rejected after prospective forecast evaluation. Therefore, I finally test the consistency and relative performance of these global seismicity models with independent observations recorded during the 2014-2019 pseudo-prospective evaluation period. As a result, hybrid earthquake models based on both geodesy and seismicity are the most informative seismicity models during the testing time frame, as they obtain higher information scores than their constituent model components. These results support the combination of interseismic strain measurements with earthquake-catalog data for improved seismicity modeling. However, further prospective evaluations are required to more accurately describe the capacities of these global ensemble seismicity models to forecast longer-term earthquake activity.
The concentration of sulfur that can be dissolved in a silicate liquid is of fundamental importance because it is closely associated with several major Earth-related processes. Considerable effort has been made to understand the interplay between the effects of silicate melt composition and its capac-ity to retain sulfur, but the dependence on pressure and temperature is mostly based on experiments performed at pressures and temperatures below 6 GPa and 2073 K. Here we present a study of the effects of pressure and temperature on sulfur content at sulfide saturation of a peridotitic liquid. We performed 14 multi-anvil experiments using a peridotitic starting composition, and we produced 25 new measurements at conditions ranging from 7 to 23 GPa and 2173 to 2623 K. We analyzed the recovered samples using both electron microprobe and laser ablation ICP-MS. We compiled our data together with previously published data that were obtained at lower P-T conditions and with various silicate melt compositions. We present a new model based on this combined data set that encompasses the entire range of upper mantle pressure-temperature conditions, along with the effect of a wide range of silicate melt compositions. Our findings are consistent with earlier work based on extrapolation from lower-pressure and lower-temperature experiments and show a decrease of sulfur content at sulfide saturation (SCSS) with increasing pressure and an increase of SCSS with increasing temperature. We have extrapolated our results to pressure-temperature conditions of the Earth's primitive magma ocean, and show that FeS will exsolve from the molten silicate and can effectively be extracted to the core by a process that has been termed the "Hadean Matte." We also discuss briefly the implications of our results for the lunar magma ocean.
Soziale Medien sind ein wesentlicher Bestandteil des Alltags von Schüler*innen und gleichzeitig zunehmend wichtig in Wirtschaft, Politik und Wissenschaft. Am Beispiel von Twitter zeigt dieser Beitrag, dass soziale Medien im Unterricht auch für die Beantwortung geographischer Fragestellungen verwendet werden können. Hierfür eignen sich Twitter-Daten aufgrund ihrer Georeferenzierung und weiterer interessanter Inhalte besonders. Der Beitrag gibt einen Überblick über die Verwendung von Twitter für sozialwissenschaftliche und humangeographische Fragestellungen und reflektiert die Nutzung von Twitter im Unterricht. Für die Unterrichtspraxis werden Beispiele zu den Themen Braunkohle, Flutereignisse und Raumwahrnehmungen sowie Anleitungen zur Auswertung, Anwendung und Reflexion von Twitter-Analysen vorgestellt.
Soziale Medien sind ein wesentlicher Bestandteil des Alltags von Schüler*innen und gleichzeitig zunehmend wichtig in Wirtschaft, Politik und Wissenschaft. Am Beispiel von Twitter zeigt dieser Beitrag, dass soziale Medien im Unterricht auch für die Beantwortung geographischer Fragestellungen verwendet werden können. Hierfür eignen sich Twitter-Daten aufgrund ihrer Georeferenzierung und weiterer interessanter Inhalte besonders. Der Beitrag gibt einen Überblick über die Verwendung von Twitter für sozialwissenschaftliche und humangeographische Fragestellungen und reflektiert die Nutzung von Twitter im Unterricht. Für die Unterrichtspraxis werden Beispiele zu den Themen Braunkohle, Flutereignisse und Raumwahrnehmungen sowie Anleitungen zur Auswertung, Anwendung und Reflexion von Twitter-Analysen vorgestellt.
The correct orientation of seismic sensors is critical for studies such as full moment tensor inversion, receiver function analysis, and shear-wave splitting. Therefore, the orientation of horizontal components needs to be checked and verified systematically. This study relies on two different waveform-based approaches, to assess the sensor orientations of the broadband network of the Kandilli Observatory and Earthquake Research Institute (KOERI). The network is an important backbone for seismological research in the Eastern Mediterranean Region and provides a comprehensive seismic data set for the North Anatolian fault. In recent years, this region became a worldwide field laboratory for continental transform faults. A systematic survey of the sensor orientations of the entire network, as presented here, facilitates related seismic studies. We apply two independent orientation tests, based on the polarization of P waves and Rayleigh waves to 123 broadband seismic stations, covering a period of 15 yr (2004-2018). For 114 stations, we obtain stable results with both methods. Approximately, 80% of the results agree with each other within 10 degrees. Both methods indicate that about 40% of the stations are misoriented by more than 10 degrees. Among these, 20 stations are misoriented by more than 20 degrees. We observe temporal changes of sensor orientation that coincide with maintenance work or instrument replacement. We provide time-dependent sensor misorientation correction values for the KOERI network in the supplemental material.
Transient permeability in porous and fractured sandstones mediated by fluid-rock interactions
(2021)
Understanding the fluid transport properties of subsurface rocks is essential for a large number of geotechnical applications, such as hydrocarbon (oil/gas) exploitation, geological storage (CO2/fluids), and geothermal reservoir utilization. To date, the hydromechanically-dependent fluid flow patterns in porous media and single macroscopic rock fractures have received numerous investigations and are relatively well understood. In contrast, fluid-rock interactions, which may permanently affect rock permeability by reshaping the structure and changing connectivity of pore throats or fracture apertures, need to be further elaborated. This is of significant importance for improving the knowledge of the long-term evolution of rock transport properties and evaluating a reservoir’ sustainability. The thesis focuses on geothermal energy utilization, e.g., seasonal heat storage in aquifers and enhanced geothermal systems, where single fluid flow in porous rocks and rock fracture networks under various pressure and temperature conditions dominates.
In this experimental study, outcrop samples (i.e., Flechtinger sandstone, an illite-bearing Lower Permian rock, and Fontainebleau sandstone, consisting of pure quartz) were used for flow-through experiments under simulated hydrothermal conditions. The themes of the thesis are (1) the investigation of clay particle migration in intact Flechtinger sandstone and the coincident permeability damage upon cyclic temperature and fluid salinity variations; (2) the determination of hydro-mechanical properties of self-propping fractures in Flechtinger and Fontainebleau sandstones with different fracture features and contrasting mechanical properties; and (3) the investigation of the time-dependent fracture aperture evolution of Fontainebleau sandstone induced by fluid-rock interactions (i.e., predominantly pressure solution). Overall, the thesis aims to unravel the mechanisms of the instantaneous reduction (i.e., direct responses to thermo-hydro-mechanical-chemical (THMC) conditions) and progressively-cumulative changes (i.e., time-dependence) of rock transport properties.
Permeability of intact Flechtinger sandstone samples was measured under each constant condition, where temperature (room temperature up to 145 °C) and fluid salinity (NaCl: 0 ~ 2 mol/l) were stepwise changed. Mercury intrusion porosimetry (MIP), electron microprobe analysis (EMPA), and scanning electron microscopy (SEM) were performed to investigate the changes of local porosity, microstructures, and clay element contents before and after the experiments. The results indicate that the permeability of illite-bearing Flechtinger sandstones will be impaired by heating and exposure to low salinity pore fluids. The chemically induced permeability variations prove to be path-dependent concerning the applied succession of fluid salinity changes. The permeability decay induced by a temperature increase and a fluid salinity reduction operates by relatively independent mechanisms, i.e., thermo-mechanical and thermo-chemical effects.
Further, the hydro-mechanical investigations of single macroscopic fractures (aligned, mismatched tensile fractures, and smooth saw-cut fractures) illustrate that a relative fracture wall offset could significantly increase fracture aperture and permeability, but the degree of increase depends on fracture surface roughness. X-ray computed tomography (CT) demonstrates that the contact area ratio after the pressure cycles is inversely correlated to the fracture offset. Moreover, rock mechanical properties, determining the strength of contact asperities, are crucial so that relatively harder rock (i.e., Fontainebleau sandstone) would have a higher self-propping potential for sustainable permeability during pressurization. This implies that self-propping rough fractures with a sufficient displacement are efficient pathways for fluid flow if the rock matrix is mechanically strong.
Finally, two long-term flow-through experiments with Fontainebleau sandstone samples containing single fractures were conducted with an intermittent flow (~140 days) and continuous flow (~120 days), respectively. Permeability and fluid element concentrations were measured throughout the experiments. Permeability reduction occurred at the beginning stage when the stress was applied, while it converged at later stages, even under stressed conditions. Fluid chemistry and microstructure observations demonstrate that pressure solution governs the long-term fracture aperture deformation, with remarkable effects of the pore fluid (Si) concentration and the structure of contact grain boundaries. The retardation and the cessation of rock fracture deformation are mainly induced by the contact stress decrease due to contact area enlargement and a dissolved mass accumulation within the contact boundaries. This work implies that fracture closure under constant (pressure/stress and temperature) conditions is likely a spontaneous process, especially at the beginning stage after pressurization when the contact area is relatively small. In contrast, a contact area growth yields changes of fracture closure behavior due to the evolution of contact boundaries and concurrent changes in their diffusive properties. Fracture aperture and thus permeability will likely be sustainable in the long term if no other processes (e.g., mineral precipitations in the open void space) occur.
Hydromechanical investigations on the self-propping potential of fractures in tight sandstones
(2021)
The hydromechanical properties of single self-propping fractures under stress are of fundamental interest for fractured-rock hydrology and a large number of geotechnical applications. This experimental study investigates fracture closure and hydraulic aperture changes of displaced tensile fractures, aligned tensile fractures, and saw-cut fractures for two types of sandstone (i.e., Flechtinger and Fontainebleau) with contrasting mechanical properties, cycling confining pressure between 5 and 30 MPa. Emphasis is placed on how surface roughness, fracture wall offset, and the mechanical properties of the contact asperities affect the self-propping potential of these fractures under normal stress. A relative fracture wall displacement can significantly increase fracture aperture and hydraulic conductivity, but the degree of increase strongly depends on the fracture surface roughness. For smooth fractures, surface roughness remains scale-independent as long as the fracture area is larger than a roll-off wavelength and thus any further displacement does not affect fracture aperture. For rough tensile fractures, these are self-affine over a larger scale so that an incremental fracture wall offset likely leads to an increase in fracture aperture. X-ray microtomography of the fractures indicates that the contact area ratio of the tensile fractures after the confining pressure cycle inversely correlates with the fracture wall offset yielding values in the range of about 3-25%, depending, first, on the respective surface roughness and, second, on the strength of the asperities in contact. Moreover, the contact asperities mainly occur isolated and tend to be preferentially oriented in the direction perpendicular to the fracture wall displacement which, in turn, may induce flow anisotropy. This, overall, implies that relatively harder sedimentary rocks have a higher self-propping potential for sustainable fluid flow through fractures in comparison to relatively soft rocks when specific conditions regarding surface roughness and fracture wall offset are met.
White mica and tourmaline are the dominant hydrothermal alteration minerals at the world-class Panasqueira W-Sn-Cu deposit in Portugal. Thus, understanding the controls on their chemical composition helps to constrain ore formation processes at this deposit and determine their usefulness as pathfinder minerals for mineralization in general. We combine whole-rock geochemistry of altered and unaltered metasedimentary host rocks with in situ LA-ICP-MS measurements of tourmaline and white mica from the alteration halo. Principal component analysis (PCA) is used to better identify geochemical patterns and trends of hydrothermal alteration in the datasets. The hydrothermally altered metasediments are enriched in As, Sn, Cs, Li, W, F, Cu, Rb, Zn, Tl, and Pb relative to unaltered samples. In situ mineral analyses show that most of these elements preferentially partition into white mica over tourmaline (Li, Rb, Cs, Tl, W, and Sn), whereas Zn is enriched in tourmaline. White mica has distinct compositions in different settings within the deposit (greisen, vein selvages, wall rock alteration zone, late fault zone), indicating a compositional evolution with time. In contrast, tourmaline from different settings overlaps in composition, which is ascribed to a stronger dependence on host rock composition and also to the effects of chemical zoning and microinclusions affecting the LA-ICP-MS analyses. Hence, in this deposit, white mica is the better recorder of the fluid composition. The calculated trace-element contents of the Panasqueira mineralizing fluid based on the mica data and estimates of mica-fluid partition coefficients are in good agreement with previous fluid-inclusion analyses. A compilation of mica and tourmaline trace-element compositions from Panasqueira and other W-Sn deposits shows that white mica has good potential as a pathfinder mineral, with characteristically high Li, Cs, Rb, Sn, and W contents. The trace-element contents of hydrothermal tourmaline are more variable. Nevertheless, the compiled data suggest that high Sn and Li contents are distinctive for tourmaline from W-Sn deposits.
"In spite of ever-increasing research into natural hazards, the reported damage from natural disasters continues to rise, increasingly disrupting human activities. We, as scientists who study the way in which the part of Earth most relevant to society- the surface-behaves, are disturbed and frustrated by this trend. It appears that the large amounts of funding devoted each year to research into reducing the impacts of natural disasters could be much more effective in producing useful results. At the same time we are aware that society, as represented by its decision makers, while increasingly concerned at the impacts of natural disasters on lives and economies, is reluctant to acknowledge the intrinsic activity of Earth's surface and to take steps to adapt societal behaviour to minimise the impacts of natural disasters. Understanding and managing natural hazards and disasters are beyond matters of applied earth science, and also involve considering human societal, economic and political decisions"
Fluids in the Earth's crust can move by creating and flowing through fractures, in a process called `hydraulic fracturing’. The tip-line of such fluid-filled fractures grows at locations where stress is larger than the strength of the rock. Where the tip stress vanishes, the fracture closes and the fluid-front retreats. If stress gradients exist on the fracture's walls, induced by fluid/rock density contrasts or topographic stresses, this results in an asymmetric shape and growth of the fracture, allowing for the contained batch of fluid to propagate through the crust.
The state-of-the-art analytical and numerical methods to simulate fluid-filled fracture propagation are two-dimensional (2D). In this work I extend these to three dimensions (3D). In my analytical method, I approximate the propagating 3D fracture as a penny-shaped crack that is influenced by both an internal pressure and stress gradients. In addition, I develop a numerical method to model propagation where curved fractures can be simulated as a mesh of triangular dislocations, with the displacement of faces computed using the displacement discontinuity method. I devise a rapid technique to approximate stress intensity and use this to calculate the advance of the tip-line. My 3D models can be applied to arbitrary stresses, topographic and crack shapes, whilst retaining short computation times.
I cross-validate my analytical and numerical methods and apply them to various natural and man-made settings, to gain additional insights into the movements of hydraulic fractures such as magmatic dikes and fluid injections in rock. In particular, I calculate the `volumetric tipping point’, which once exceeded allows a fluid-filled fracture to propagate in a `self-sustaining’ manner. I discuss implications this has for hydro-fracturing in industrial operations. I also present two studies combining physical models that define fluid-filled fracture trajectories and Bayesian statistical techniques. In these studies I show that the stress history of the volcanic edifice defines the location of eruptive vents at volcanoes. Retrieval of the ratio between topographic to remote stresses allows for forecasting of probable future vent locations. Finally, I address the mechanics of 3D propagating dykes and sills in volcanic regions. I focus on Sierra Negra volcano in the Gal\'apagos islands, where in 2018, a large sill propagated with an extremely curved trajectory. Using a 3D analysis, I find that shallow horizontal intrusions are highly sensitive to topographic and buoyancy stress gradients, as well as the effects of the free surface.
The computational costs associated with coupled reactive transport simulations are mostly due to the chemical subsystem: replacing it with a pre-trained statistical surrogate is a promising strategy to achieve decisive speedups at the price of small accuracy losses and thus to extend the scale of problems which can be handled. We introduce a hierarchical coupling scheme in which "full-physics" equation-based geochemical simulations are partially replaced by surrogates. Errors in mass balance resulting from multivariate surrogate predictions effectively assess the accuracy of multivariate regressions at runtime: inaccurate surrogate predictions are rejected and the more expensive equation-based simulations are run instead. Gradient boosting regressors such as XGBoost, not requiring data standardization and being able to handle Tweedie distributions, proved to be a suitable emulator. Finally, we devise a surrogate approach based on geochemical knowledge, which overcomes the issue of robustness when encountering previously unseen data and which can serve as a basis for further development of hybrid physics-AI modelling.
POET (v0.1): speedup of many-core parallel reactive transport simulations with fast DHT lookups
(2021)
Coupled reactive transport simulations are extremely demanding in terms of required computational power, which hampers their application and leads to coarsened and oversimplified domains. The chemical sub-process represents the major bottleneck: its acceleration is an urgent challenge which gathers increasing interdisciplinary interest along with pressing requirements for subsurface utilization such as spent nuclear fuel storage, geothermal energy and CO2 storage. In this context we developed POET (POtsdam rEactive Transport), a research parallel reactive transport simulator integrating algorithmic improvements which decisively speed up coupled simulations. In particular, POET is designed with a master/worker architecture, which ensures computational efficiency in both multicore and cluster compute environments. POET does not rely on contiguous grid partitions for the parallelization of chemistry but forms work packages composed of grid cells distant from each other. Such scattering prevents particularly expensive geochemical simulations, usually concentrated in the vicinity of a reactive front, from generating load imbalance between the available CPUs (central processing units), as is often the case with classical partitions. Furthermore, POET leverages an original implementation of the distributed hash table (DHT) mechanism to cache the results of geochemical simulations for further reuse in subsequent time steps during the coupled simulation. The caching is hence particularly advantageous for initially chemically homogeneous simulations and for smooth reaction fronts. We tune the rounding employed in the DHT on a 2D benchmark to validate the caching approach, and we evaluate the performance gain of POET's master/worker architecture and the DHT speedup on a 3D benchmark comprising around 650 000 grid elements. The runtime for 200 coupling iterations, corresponding to 960 simulation days, reduced from about 24 h on 11 workers to 29 min on 719 workers. Activating the DHT reduces the runtime further to 2 h and 8 min respectively. Only with these kinds of reduced hardware requirements and computational costs is it possible to realistically perform the longterm complex reactive transport simulations, as well as perform the uncertainty analyses required by pressing societal challenges connected with subsurface utilization.
How biased are our models?
(2021)
Geophysical process simulations play a crucial role in the understanding of the subsurface. This understanding is required to provide, for instance, clean energy sources such as geothermal energy. However, the calibration and validation of the physical models heavily rely on state measurements such as temperature. In this work, we demonstrate that focusing analyses purely on measurements introduces a high bias. This is illustrated through global sensitivity studies. The extensive exploration of the parameter space becomes feasible through the construction of suitable surrogate models via the reduced basis method, where the bias is found to result from very unequal data distribution. We propose schemes to compensate for parts of this bias. However, the bias cannot be entirely compensated. Therefore, we demonstrate the consequences of this bias with the example of a model calibration.
Large rock slope failures play a pivotal role in long-term landscape evolution and are a major concern in land use planning and hazard aspects. While the failure phase and the time immediately prior to failure are increasingly well studied, the nature of the preparation phase remains enigmatic. This knowledge gap is due, to a large degree, to difficulties associated with instrumenting high mountain terrain and the local nature of classic monitoring methods, which does not allow integral observation of large rock volumes. Here, we analyse data from a small network of up to seven seismic sensors installed during July-October 2018 (with 43 days of data loss) at the summit of the Hochvogel, a 2592 m high Alpine peak. We develop proxy time series indicative of cyclic and progressive changes of the summit. Modal analysis, horizontal-to-vertical spectral ratio data and end-member modelling analysis reveal diurnal cycles of increasing and decreasing coupling stiffness of a 260,000 m(3) large, instable rock volume, due to thermal forcing. Relative seismic wave velocity changes also indicate diurnal accumulation and release of stress within the rock mass. At longer time scales, there is a systematic superimposed pattern of stress increased over multiple days and episodic stress release within a few days, expressed in an increased emission of short seismic pulses indicative of rock cracking. Our data provide essential first order information on the development of large-scale slope instabilities towards catastrophic failure. (c) 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd
Large rock slope failures play a pivotal role in long-term landscape evolution and are a major concern in land use planning and hazard aspects. While the failure phase and the time immediately prior to failure are increasingly well studied, the nature of the preparation phase remains enigmatic. This knowledge gap is due, to a large degree, to difficulties associated with instrumenting high mountain terrain and the local nature of classic monitoring methods, which does not allow integral observation of large rock volumes. Here, we analyse data from a small network of up to seven seismic sensors installed during July-October 2018 (with 43 days of data loss) at the summit of the Hochvogel, a 2592 m high Alpine peak. We develop proxy time series indicative of cyclic and progressive changes of the summit. Modal analysis, horizontal-to-vertical spectral ratio data and end-member modelling analysis reveal diurnal cycles of increasing and decreasing coupling stiffness of a 260,000 m(3) large, instable rock volume, due to thermal forcing. Relative seismic wave velocity changes also indicate diurnal accumulation and release of stress within the rock mass. At longer time scales, there is a systematic superimposed pattern of stress increased over multiple days and episodic stress release within a few days, expressed in an increased emission of short seismic pulses indicative of rock cracking. Our data provide essential first order information on the development of large-scale slope instabilities towards catastrophic failure. (c) 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd
DeepGeoMap
(2021)
In recent years, deep learning improved the way remote sensing data is processed. The classification of hyperspectral data is no exception. 2D or 3D convolutional neural networks have outperformed classical algorithms on hyperspectral image classification in many cases. However, geological hyperspectral image classification includes several challenges, often including spatially more complex objects than found in other disciplines of hyperspectral imaging that have more spatially similar objects (e.g., as in industrial applications, aerial urban- or farming land cover types). In geological hyperspectral image classification, classical algorithms that focus on the spectral domain still often show higher accuracy, more sensible results, or flexibility due to spatial information independence. In the framework of this thesis, inspired by classical machine learning algorithms that focus on the spectral domain like the binary feature fitting- (BFF) and the EnGeoMap algorithm, the author of this thesis proposes, develops, tests, and discusses a novel, spectrally focused, spatial information independent, deep multi-layer convolutional neural network, named 'DeepGeoMap’, for hyperspectral geological data classification. More specifically, the architecture of DeepGeoMap uses a sequential series of different 1D convolutional neural networks layers and fully connected dense layers and utilizes rectified linear unit and softmax activation, 1D max and 1D global average pooling layers, additional dropout to prevent overfitting, and a categorical cross-entropy loss function with Adam gradient descent optimization. DeepGeoMap was realized using Python 3.7 and the machine and deep learning interface TensorFlow with graphical processing unit (GPU) acceleration. This 1D spectrally focused architecture allows DeepGeoMap models to be trained with hyperspectral laboratory image data of geochemically validated samples (e.g., ground truth samples for aerial or mine face images) and then use this laboratory trained model to classify other or larger scenes, similar to classical algorithms that use a spectral library of validated samples for image classification. The classification capabilities of DeepGeoMap have been tested using two geological hyperspectral image data sets. Both are geochemically validated hyperspectral data sets one based on iron ore and the other based on copper ore samples. The copper ore laboratory data set was used to train a DeepGeoMap model for the classification and analysis of a larger mine face scene within the Republic of Cyprus, where the samples originated from. Additionally, a benchmark satellite-based dataset, the Indian Pines data set, was used for training and testing. The classification accuracy of DeepGeoMap was compared to classical algorithms and other convolutional neural networks. It was shown that DeepGeoMap could achieve higher accuracies and outperform these classical algorithms and other neural networks in the geological hyperspectral image classification test cases. The spectral focus of DeepGeoMap was found to be the most considerable advantage compared to spectral-spatial classifiers like 2D or 3D neural networks. This enables DeepGeoMap models to train data independently of different spatial entities, shapes, and/or resolutions.
We developed an orbital tuned age model for the composite Chew Bahir sediment core, obtained from the Chew Bahir basin (CHB), southern Ethiopia. To account for the effects of sedimentation rate changes on the spectral expression of the orbital cycles we developed a new method: the Multi-band Wavelet Age modeling technique (MUBAWA). By using a Continuous Wavelet Transformation, we were able to track frequency shifts that resulted from changing sedimentation rates and thus calculated tuned age model encompassing the last 620 kyrs. The results show a good agreement with the directly dated age model that is available from the dating of volcanic ashes. Then we used the XRF data from CHB and developed a new and robust humid-arid index of east African climate during the last 620 kyrs. To disentangle the relationship of the selected elements we performed a principal component analysis (PCA). In a following step we applied a continuous wavelet transformation on the PC1, using the directly dated age model. The resulting wavelet power spectrum, unlike a normal power spectrum, displays the occurrence of cycles/frequencies in time. The results highlight that the precession cycles are most dominantly expressed under the 400 kyrs eccentricity maximum whereas weakly expressed during eccentricity minimum. This suggests that insolation is a key driver of the climatic variability observed at CHB throughout the last 620 kyrs. In addition, the prevalence of half-precession and obliquity signals was documented. The latter is attributed to the inter-tropical insolation gradient and not interpreted as an imprint of high latitudes forcing on climatic changes in the tropics. In addition, a windowed analysis of variability was used to detect changes in variance over time and showed that strong climate variability occurred especially along the transition from a dominant insolation-controlled humid climate background state towards a predominantly dry and less-insolation controlled climate. The last chapter dealt with non-linear aspects of climate changes represented by the sediments of the CHB. We use recurrence quantification analysis to detect non-linear changes within the potassium concentration of Chew Bahir sediment cores during the last 620 kyrs. The concentration of potassium in the sediments of the lake is subject to geochemical processes related to the evaporation rate of the lake water at the time of deposition. Based on recurrence analysis, two types of variabilities could be distinguished. Type 1 represents slow variations within the precession period bandwidth of 20 kyrs and a tendency towards extreme climatic events whereas type 2 represents fast, highly variable climatic transitions between wet and dry climate states. While type 1 variability is linked to eccentricity maxima, type 2 variability occurs during the 400 kyrs eccentricity minimum. The climate history presented here shows that during high eccentricity a strongly insolation-driven climate system prevailed, whereas during low eccentricity the climate was more strongly affected by short-term variability changes. The short-term environmental changes, reflected in the increased variability might have influenced the evolution, technological advances and expansion of early modern humans who lived in this region. In the Olorgesaille Basin the temporal changes in the occurrence of stone tools, which bracket the transition from Acheulean to Middle Stone Age (MSA) technologies at between 499–320 kyrs, could potentially correlate to the marked transition from a rather stable climate with less variability to a climate with increased variability in the CHB. We conclude that populations of early anatomically modern humans are more likely to have experienced climatic stress during episodes of low eccentricity, associated with dry and high variability climate conditions, which may have led to technological innovation, such as the transition from the Acheulean to the Middle Stone Age.
The eruption frequency of geysers can be studied easily on the surface. However, details of the internal structure including possible water and gas filled chambers feeding eruptions and the driving mechanisms often remain elusive. We used a multidisciplinary network of seismometers, video cameras, water pressure sensors and one tiltmeter to study the eruptive cycle, internal structure, and mechanisms driving the eruptive cycle of Strokkur geyser in June 2018. An eruptive cycle at Strokkur always consists of four phases: (1) Eruption, (2) post-eruptive conduit refilling, (3) gas filling of the bubble trap, and (4) regular bubble collapse at shallow depth in the conduit. For a typical single eruption 19 +/- 4 bubble collapses occur in Phase 3 and 8 +/- 2 collapses in Phase 4 at a mean spacing of 1.52 +/- 0.29 and 24.5 +/- 5.9 s, respectively. These collapses release latent heat to the fluid in the bubble trap (Phase 3) and later to the fluid in the conduit (Phase 4). The latter eventually reaches thermodynamic conditions for an eruption. Single to sextuple eruptions have similar spacings between bubble collapses and are likely fed from the same bubble trap at 23.7 +/- 4.4 m depth, 13-23 m west of the conduit. However, the duration of the eruption and recharging phase linearly increases likely due to a larger water, gas and heat loss from the system. Our tremor data provides documented evidence for a bubble trap beneath a pool geyser.
Due to the high concentration of people and infrastructures in European cities, the possible impacts of climate change are particularly high (cities' social, economic and technical vulnerabilities). Adaptation measures to reduce the sensitivity of a city to climate risks are therefore of particular importance. Nevertheless, it is also common to develop compact and dense urban areas to reduce urban sprawl. Urban infill development and sustainable spatial climate policies are thus in apparent conflict with each other. This article examines how German cities deal with the tensions between these two policy fields. Using six case studies, a new heuristic analysis method is applied. This study identifies three key governance aspects that are essential for promoting the joint implementation: instruments, organisation and interaction. Based on our case studies, we conclude that successful implementation can only be achieved through integrative governance including all three domains.
Due to the high concentration of people and infrastructures in European cities, the possible impacts of climate change are particularly high (cities' social, economic and technical vulnerabilities). Adaptation measures to reduce the sensitivity of a city to climate risks are therefore of particular importance. Nevertheless, it is also common to develop compact and dense urban areas to reduce urban sprawl. Urban infill development and sustainable spatial climate policies are thus in apparent conflict with each other. This article examines how German cities deal with the tensions between these two policy fields. Using six case studies, a new heuristic analysis method is applied. This study identifies three key governance aspects that are essential for promoting the joint implementation: instruments, organisation and interaction. Based on our case studies, we conclude that successful implementation can only be achieved through integrative governance including all three domains.
In this article, we address the question of how observed ground-motion data can most effectively be modeled for engineering seismological purposes. Toward this goal, we use a data-driven method, based on a deep-learning autoencoder with a variable number of nodes in the bottleneck layer, to determine how many parameters are needed to reconstruct synthetic and observed ground-motion data in terms of their median values and scatter. The reconstruction error as a function of the number of nodes in the bottleneck is used as an indicator of the underlying dimensionality of ground-motion data, that is, the minimum number of predictor variables needed in a ground-motion model. Two synthetic and one observed datasets are studied to prove the performance of the proposed method. We find that mapping ground-motion data to a 2D manifold primarily captures magnitude and distance information and is suited for an approximate data reconstruction. The data reconstruction improves with an increasing number of bottleneck nodes of up to three and four, but it saturates if more nodes are added to the bottleneck.
Alpine glacial erosion exerts a first-order control on mountain topography and sediment production, but its mechanisms are poorly understood. Observational data capable of testing glacial erosion and transport laws in glacial models are mostly lacking. New insights, however, can be gained from detrital tracer thermochronology. Detrital tracer thermochronology works on the premise that thermochronometer bedrock ages vary systematically with elevation, and that detrital downstream samples can be used to infer the source elevation sectors of sediments. We analyze six new detrital samples of different grain sizes (sand and pebbles) from glacial deposits and the modern river channel integrated with data from 18 previously analyzed bedrock samples from an elevation transect in the Leones Valley, Northern Patagonian Icefield, Chile (46.7 degrees S). We present 622 new detrital zircon (U-Th)/He (ZHe) single-grain analyses and 22 new bedrock ZHe analyses for two of the bedrock samples to determine age reproducibility. Results suggest that glacial erosion was focused at and below the Last Glacial Maximum and neoglacial equilibrium line altitudes, supporting previous modeling studies. Furthermore, grain age distributions from different grain sizes (sand, pebbles) might indicate differences in erosion mechanisms, including mass movements at steep glacial valley walls. Finally, our results highlight complications and opportunities in assessing glacigenic environments, such as dynamics of sediment production, transport, transient storage, and final deposition, that arise from settings with large glacio-fluvial catchments.
El flanco oriental de los Andes Centrales en el noroeste argentino es una zona caracterizada por serranías limitadas por fallas inversas que conforman un orógeno de piel gruesa activo con un patrón espacio-temporal no sistemático de deformación contraccional. Este patrón queda representado tanto por la dispersión de la actividad sísmica cortical como de la localización de las estructuras cuaternarias a través de la Cordillera Oriental y el Sistema de Santa Bárbara, configurando un frente orogénico difuso de más de 200 km de extensión. El estudio de la actividad neotectónica en esta región ha tomado más relevancia en los últimos años, mediante la aplicación de herramientas variadas, incluyendo técnicas de geomorfología tectónica, herramientas de teledetección, geodesia y estudios de campo convencionales. Los depósitos lacustres han demostrado ser, en numerosos ejemplos, excelentes marcadores de la actividad tectónica, dadas la horizontalidad original de sus capas y la susceptibilidad a los cambios del entorno. Es por ello que en este trabajo se analizaron los depósitos lacustres que afloran en el sector central de los valles Calchaquíes (región de Cafayate), para comprender cómo se acomoda la deformación cuaternaria en una de las cuencas intermontanas de la cuña orogénica activa.
El rumbo de las estructuras cuaternarias en el área de estudio es subparalelo al de las fallas que exhuman los cordones serranos circundantes. A partir del estudio estratigráfico, morfotectónico y estructural de los depósitos lacustres, se identificó un mínimo de cinco episodios de deformación afectando a la columna estratigráfica cuaternaria. Integrando perfiles estructurales balanceados con edades obtenidas en este trabajo y recopiladas de la bibliografía, se calcularon para el Pleistoceno mediotardío, tasas mínimas y máximas de acortamiento que varían entre 0,19-2,80 y 0,21-4,47 mm/a, respectivamente. Para comparar estos resultados con mediciones de la tectónica activa a escala regional se recopilaron datos de estaciones geodésicas del noroeste argentino, con los cuales se elaboró un perfil de velocidades horizontales. El perfil obtenido muestra un decrecimiento gradual de los vectores hacia el este, indicando actividad interna del orógeno en congruencia con los registros de actividad sísmica y compilación regional de las estructuras cuaternarias.
Además de la caracterización neotectónica de este sector de la Cordillera Oriental, el análisis estratigráfico de los depósitos lacustres ha permitido refinar la evolución geológica del sector central de los valles Calchaquíes durante el Cuaternario. De esta manera se han identificado al menos siete episodios de inundación lacustre relacionados con la desconexión del sistema fluvial con su nivel de base, dando lugar a sucesivos eventos de agradación y erosión. Las cotas máximas alcanzadas por los paleolagos, en conjunto con un modelo hidrológico previamente publicado para esta región, permitieron asimismo efectuar una comparación con el registro paleoclimático regional.
Los resultados de esta tesis representan un aporte significativo al conocimiento de la evolución tectónica y estratigráfica del sector central de los valles Calchaquíes durante el Cuaternario. Por otra parte, su integración a escala regional contribuye a comprender mejor la dinámica de la deformación en la cuña orogénica de piel gruesa del noroeste argentino.
Glacial lakes in the Hindu Kush–Karakoram–Himalayas–Nyainqentanglha (HKKHN) region have grown rapidly in number and area in past decades, and some dozens have drained in catastrophic glacial lake outburst floods (GLOFs). Estimating regional susceptibility of glacial lakes has largely relied on qualitative assessments by experts, thus motivating a more systematic and quantitative appraisal. Before the backdrop of current climate-change projections and the potential of elevation-dependent warming, an objective and regionally consistent assessment is urgently needed. We use an inventory of 3390 moraine-dammed lakes and their documented outburst history in the past four decades to test whether elevation, lake area and its rate of change, glacier-mass balance, and monsoonality are useful inputs to a probabilistic classification model. We implement these candidate predictors in four Bayesian multi-level logistic regression models to estimate the posterior susceptibility to GLOFs. We find that mostly larger lakes have been more prone to GLOFs in the past four decades regardless of the elevation band in which they occurred. We also find that including the regional average glacier-mass balance improves the model classification. In contrast, changes in lake area and monsoonality play ambiguous roles. Our study provides first quantitative evidence that GLOF susceptibility in the HKKHN scales with lake area, though less so with its dynamics. Our probabilistic prognoses offer improvement compared to a random classification based on average GLOF frequency. Yet they also reveal some major uncertainties that have remained largely unquantified previously and that challenge the applicability of single models. Ensembles of multiple models could be a viable alternative for more accurately classifying the susceptibility of moraine-dammed lakes to GLOFs.
In my doctoral thesis, I examine continuous gravity measurements for monitoring of the geothermal site at Þeistareykir in North Iceland. With the help of high-precision superconducting gravity meters (iGravs), I investigate underground mass changes that are caused by operation of the geothermal power plant (i.e. by extraction of hot water and reinjection of cold water). The overall goal of this research project is to make a statement about the sustainable use of the geothermal reservoir, from which also the Icelandic energy supplier and power plant operator Landsvirkjun should benefit.
As a first step, for investigating the performance and measurement stability of the gravity meters, in summer 2017, I performed comparative measurements at the gravimetric observatory J9 in Strasbourg. From the three-month gravity time series, I examined calibration, noise and drift behaviour of the iGravs in comparison to stable long-term time series of the observatory superconducting gravity meters. After preparatory work in Iceland (setup of gravity stations, additional measuring equipment and infrastructure, discussions with Landsvirkjun and meetings with the Icelandic partner institute ISOR), gravity monitoring at Þeistareykir was started in December 2017. With the help of the iGrav records of the initial 18 months after start of measurements, I carried out the same investigations (on calibration, noise and drift behaviour) as in J9 to understand how the transport of the superconducting gravity meters to Iceland may influence instrumental parameters.
In the further course of this work, I focus on modelling and reduction of local gravity contributions at Þeistareykir. These comprise additional mass changes due to rain, snowfall and vertical surface displacements that superimpose onto the geothermal signal of the gravity measurements. For this purpose, I used data sets from additional monitoring sensors that are installed at each gravity station and adapted scripts for hydro-gravitational modelling. The third part of my thesis targets geothermal signals in the gravity measurements.
Together with my PhD colleague Nolwenn Portier from France, I carried out additional gravity measurements with a Scintrex CG5 gravity meter at 26 measuring points within the geothermal field in the summers of 2017, 2018 and 2019. These annual time-lapse gravity measurements are intended to increase the spatial coverage of gravity data from the three continuous monitoring stations to the entire geothermal field. The combination of CG5 and iGrav observations, as well as annual reference measurements with an FG5 absolute gravity meter represent the hybrid gravimetric monitoring method for Þeistareykir. Comparison of the gravimetric data to local borehole measurements (of groundwater levels, geothermal extraction and injection rates) is used to relate the observed gravity changes to the actually extracted (and reinjected) geothermal fluids. An approach to explain the observed gravity signals by means of forward modelling of the geothermal production rate is presented at the end of the third (hybrid gravimetric) study. Further modelling with the help of the processed gravity data is planned by Landsvirkjun. In addition, the experience from time-lapse and continuous gravity monitoring will be used for future gravity measurements at the Krafla geothermal field 22 km south-east of Þeistareykir.
Tectonically active coasts are dynamic environments characterized by the presence of multiple marine terraces formed by the combined effects of wave erosion, tectonic uplift, and sea-level oscillations at glacialcycle timescales. Well-preserved erosional terraces from the last interglacial sea-level highstand are ideal marker horizons for reconstructing past sea-level positions and calculating vertical displacement rates. We carried out an almost continuous mapping of the last interglacial marine terrace along similar to 5000 km of the western coast of South America between 1 degrees N and 40 degrees S. We used quantitatively replicable approaches constrained by published terrace-age estimates to ultimately compare elevations and patterns of uplifted terraces with tectonic and climatic parameters in order to evaluate the controlling mechanisms for the formation and preservation of marine terraces and crustal deformation. Uncertainties were estimated on the basis of measurement errors and the distance from referencing points. Overall, our results indicate a median elevation of 30.1 m, which would imply a median uplift rate of 0.22 m kyr(-1) averaged over the past similar to 125 kyr. The patterns of terrace elevation and uplift rate display high-amplitude (similar to 100-200 m) and long-wavelength (similar to 10(2) km) structures at the Manta Peninsula (Ecuador), the San Juan de Marcona area (central Peru), and the Arauco Peninsula (south-central Chile). Medium-wavelength structures occur at the Mejillones Peninsula and Topocalma in Chile, while short-wavelength (< 10 km) features are for instance located near Los Vilos, Valparaiso, and Carranza, Chile. We interpret the long-wavelength deformation to be controlled by deep-seated processes at the plate interface such as the subduction of major bathymetric anomalies like the Nazca and Carnegie ridges. In contrast, short-wavelength deformation may be primarily controlled by sources in the upper plate such as crustal faulting, which, however, may also be associated with the subduction of topographically less pronounced bathymetric anomalies. Latitudinal differences in climate additionally control the formation and preservation of marine terraces. Based on our synopsis we propose that increasing wave height and tidal range result in enhanced erosion and morphologically well-defined marine terraces in south-central Chile. Our study emphasizes the importance of using systematic measurements and uniform, quantitative methodologies to characterize and correctly interpret marine terraces at regional scales, especially if they are used to unravel the tectonic and climatic forcing mechanisms of their formation. This database is an integral part of the World Atlas of Last Interglacial Shorelines (WALIS), published online at https://doi.org/10.5281/zenodo.4309748 (Freisleben et al., 2020).
Dryland xeric conditions exert a deterministic effect on microbial communities, forcing life into refuge niches. Deposited rocks can form a lithic niche for microorganisms in desert regions. Mineral weathering is a key process in soil formation and the importance of microbial-driven mineral weathering for nutrient extraction is increasingly accepted. Advances in geobiology provide insight into the interactions between microorganisms and minerals that play an important role in weathering processes. In this study, we present the examination of the microbial diversity in dryland rocks from the Tsauchab River banks in Namibia. We paired culture-independent 16S rRNA gene amplicon sequencing with culture-dependent (isolation of bacteria) techniques to assess the community structure and diversity patterns. Bacteria isolated from dryland rocks are typical of xeric environments and are described as being involved in rock weathering processes. For the first time, we extracted extra- and intracellular DNA from rocks to enhance our understanding of potentially rock-weathering microorganisms. We compared the microbial community structure in different rock types (limestone, quartz-rich sandstone and quartz-rich shale) with adjacent soils below the rocks. Our results indicate differences in the living lithic and sublithic microbial communities.
The Kohat fold and thrust belt in Pakistan shows a significantly different structural style due to the structural evolution on the double décollement compared to the rest of the Subhimalaya. In order to better understand the spatio-temporal structural evolution of the Kohat fold and thrust belt, we combine balanced cross sections with apatite (U?Th-Sm)/He (AHe) and apatite fission track (AFT) dating. The AHe and AFT ages appear to be totally reset, allowing us to date exhumation above structural ramps. The results suggest that deformation began on the frontal Surghar thrust at-15 Ma, predating or coeval with the development of the Main Boundary thrust at-12 Ma. Deformation propagated southward from the Main Boundary thrust on double de?collements between 10 Ma and 2 Ma, resulting in a disharmonic structural style inside the Kohat fold and thrust belt. Thermal modeling of the thermochronologic data suggest that samples inside Kohat fold and thrust belt experienced cooling due to formation of the duplexes; this deformation facilitated tectonic thickening of the wedge and erosion of the Miocene to Pliocene foreland strata. The spatial distribution of AHe and AFT ages in combination with the structural forward model suggest that, in the Kohat fold and thrust belt, the wedge deformed in-sequence as a supercritical wedge (-15-12 Ma), then readjusted by out-sequence deformation (-12-0 Ma) within the Kohat fold and thrust belt into a sub-critical wedge.
The Salt Range in Pakistan exposes Precambrian to Pleistocene strata outcropping along the Salt Range Thrust (SRT). To better understand the in-situ Cambrian and Pliocene tectonic evolution of the Pakistan Subhimalaya, we have conducted low-temperature thermochronological analysis using apatite (U-Th-Sm)/He and fission track dating. We combine cooling ages from different samples located along the thrust front of the SRT into a thermal model that shows two major cooling events associated with rifting and regional erosion in the Late Palaeozoic and SRT activity since the Pliocene. Our results suggest that the SRT maintained a long-term average shortening rate of similar to 5-6 mm/yr and a high exhumation rate above the SRT ramp since similar to 4 Ma.
A multidisciplinary approach to the study of collisional orogenic belts can improve our knowledge of their geodynamic evolution and may suggest new tectonic models, especially for (U)HP rocks inside the accretionary wedge. In the Western Alps, wherein nappes of different origin are stacked, having recorded different metamorphic peaks at different stages of the orogenic evolution. This study focuses on the External (EPZ) and Internal (IPZ) ophiolitic units of the Piedmont Zone (Susa Valley, Western Alps), which were deformed throughout four tectonometamorphic phases (D1 to D4), developing different foliations and cleavages (S1 to S4) at different metamorphic conditions. The IPZ and EPZ are separated by a shear zone (i.e. the Susa Shear Zone (SSZ)) during which a related mylonitic foliation (SM) developed. S1 developed at high pressure conditions (Epidote-eclogite vs. Lawsonite-blueschist facies conditions for IPZ and EPZ, respectively), as suggested by the composition of white mica (i.e. phengite), whereas S2 developed at low pressure conditions (Epidote-greenschist facies conditions in both IPZ and EPZ) and is defined by muscovite. White mica defining the SM mylonitic foliation (T1) is mostly defined by phengite, while the T2-related disjunctive cleavage is defined by fine-grained muscovite. The relative chronology inferred from meso-and micro-structural observations suggests that T1 was near-coeval with respect to the D2, while T2 developed during D4. A new set of radiometric ages of the main metamorphic foliations were obtained by in situ Ar/Ar dating on white mica. Different generations of white mica defining S1 and S2 foliations in both the IPZ and EPZ and SM in the SSZ, were dated and two main groups of ages were obtained. In both IPZ and EPZ, S1 foliation developed at-46-41 Ma, while S2 foliation developed at-40-36 Ma and was nearly coeval with the SM mylonitic foliation (-39-36 Ma). Comparison between structural, petrological and geochronological data allows to define time of coupling of the different units and consequently to infer new tectonic implications for the exhumation of meta-ophiolites of the Piedmont Zone within axial sector of the Western Alps.
Rheology describes the flow of matter under the influence of stress, and - related to solids- it investigates how solids subjected to stresses deform. As the deformation of the Earth’s outer layers, the lithosphere and the crust, is a major focus of rheological studies, rheology in the geosciences describes how strain evolves in rocks of variable composition and temperature under tectonic stresses. It is here where deformation processes shape the form of ocean basins and mountain belts that ultimately result from the complex interplay between lithospheric plate motion and the susceptibility of rocks to the influence of plate-tectonic forces. A rigorous study of the strength of the lithosphere and deformation phenomena thus requires in-depth studies of the rheological characteristics of the involved materials and the temporal framework of deformation processes.
This dissertation aims at analyzing the influence of the physical configuration of the lithosphere on the present-day thermal field and the overall rheological characteristics of the lithosphere to better understand variable expressions in the formation of passive continental margins and the behavior of strike-slip fault zones. The main methodological approach chosen is to estimate the present-day thermal field and the strength of the lithosphere by 3-D numerical modeling. The distribution of rock properties is provided by 3-D structural models, which are used as the basis for the thermal and rheological modeling. The structural models are based on geophysical and geological data integration, additionally constrained by 3-D density modeling. More specifically, to decipher the thermal and rheological characteristics of the lithosphere in both oceanic and continental domains, sedimentary basins in the Sea of Marmara (continental transform setting), the SW African passive margin (old oceanic crust), and the Norwegian passive margin (young oceanic crust) were selected for this study.
The Sea of Marmara, in northwestern Turkey, is located where the dextral North Anatolian Fault zone (NAFZ) accommodates the westward escape of the Anatolian Plate toward the Aegean. Geophysical observations indicate that the crust is heterogeneous beneath the Marmara basin, but a detailed characterization of the lateral crustal heterogeneities is presented for the first time in this study. Here, I use different gravity datasets and the general non-uniqueness in potential field modeling, to propose three possible end-member scenarios of crustal configuration. The models suggest that pronounced gravitational anomalies in the basin originate from significant density heterogeneities within the crust. The rheological modeling reveals that associated variations in lithospheric strength control the mechanical segmentation of the NAFZ. Importantly, a strong crust that is mechanically coupled to the upper mantle spatially correlates with aseismic patches where the fault bends and changes its strike in response to the presence of high-density lower crustal bodies. Between the bends, mechanically weaker crustal domains that are decoupled from the mantle are characterized by creep.
For the passive margins of SW Africa and Norway, two previously published 3-D conductive and lithospheric-scale thermal models were analyzed. These 3-D models differentiate various sedimentary, crustal, and mantle units and integrate different geophysical data, such as seismic observations and the gravity field. Here, the rheological modeling suggests that the present-day lithospheric strength across the oceanic domain is ultimately affected by the age and past thermal and tectonic processes as well as the depth of the thermal lithosphere-asthenosphere boundary, while the configuration of the crystalline crust dominantly controls the rheological behavior of the lithosphere beneath the continental domains of both passive margins.
The thermal and rheological models show that the variations of lithospheric strength are fundamentally influenced by the temperature distribution within the lithosphere. Moreover, as the composition of the lithosphere significantly influences the present-day thermal field, it therefore also affects the rheological characteristics of the lithosphere. Overall my studies add to our understanding of regional tectonic deformation processes and the long-term behavior of sedimentary basins; they confirm other analyses that have pointed out that crustal heterogeneities in the continents result in diverse lithospheric thermal characteristics, which in turn results in higher complexity and variations of rheological behavior compared to oceanic domains with a thinner, more homogeneous crust.
Nature-based solutions (NBS) are seen as a promising adaptation measure that sustainably deals with diverse societal challenges, while simultaneously delivering multiple benefits. Nature-based solutions have been highlighted as a resilient and sustainable means of mitigating floods and other hazards globally. This study examined diverging conceptualizations of NBS, as well as the attitudinal (for example, emotions and beliefs) and contextual (for example, legal and political aspects) barriers and drivers of NBS for flood risks in South Korea. Semistructured interviews were conducted with 11 experts and focused on the topic of flood risk measures and NBS case studies. The analysis found 11 barriers and five drivers in the attitudinal domain, and 13 barriers and two drivers in the contextual domain. Most experts see direct monetary benefits as an important attitudinal factor for the public. Meanwhile, the cost-effectiveness of NBS and their capacity to cope with flood risks were deemed influential factors that could lead decision makers to opt for NBS. Among the contextual factors, insufficient systems to integrate NBS in practice and the ideologicalization of NBS policy were found to be peculiar barriers, which hinder consistent realization of initiatives and a long-term national plan for NBS. Understanding the barriers and drivers related to the mainstreaming of NBS is critical if we are to make the most of such solutions for society and nature. It is also essential that we have a shared definition, expectation, and vision of NBS.
The lithosphere is often assumed to reside in a thermal steady-state when quantitatively describing the temperature distribution in continental interiors and sedimentary basins, but also at active plate boundaries. Here, we investigate the applicability limit of this assumption at slowly deforming continental rifts. To this aim, we assess the tectonic thermal imprint in numerical experiments that cover a range of realistic rift configurations. For each model scenario, the deviation from thermal equilibrium is evaluated. This is done by comparing the transient temperature field of every model to a corresponding steady-state model with an identical structural configuration. We find that the validity of the thermal steady-state assumption strongly depends on rift type, divergence velocity, sampling location, and depth within the rift. Maximum differences between transient and steady-state models occur in narrow rifts, at the rift sides, and if the extension rate exceeds 0.5-2 mm/a. Wide rifts, however, reside close to thermal steady-state even for high extension velocities. The transient imprint of rifting appears to be overall negligible for shallow isotherms with a temperature less than 100 degrees C. Contrarily, a steady-state treatment of deep crustal isotherms leads to an underestimation of crustal temperatures, especially for narrow rift settings. Thus, not only relatively fast rifts like the Gulf of Corinth, Red Sea, and Main Ethiopian Rift, but even slow rifts like the Kenya Rift, Rhine Graben, and Rio Grande Rift must be expected to feature a pronounced transient component in the temperature field and to therefore violate the thermal steady-state assumption for deeper crustal isotherms.
Multi-component (MC) diffusion simulations enable a process based and more precise approach to calculate transport and sorption compared to the commonly used single-component (SC) models following Fick's law. The MC approach takes into account the interaction of chemical species in the porewater with the diffuse double layer (DDL) adhering clay mineral surfaces. We studied the shaly, sandy and carbonate-rich facies of the Opalinus Clay. High clay contents dominate diffusion and sorption of uranium. The MC simulations show shorter diffusion lengths than the SC models due to anion exclusion from the DDL. This hampers diffusion of the predominant species CaUO2(CO3)32-. On the one side, species concentrations and ionic strengths of the porewater and on the other side surface charge of the clay minerals control the composition and behaviour of the DDL. For some instances, it amplifies the diffusion of uranium. We developed a workflow to transfer computationally intensive MC simulations to SC models via calibrated effective diffusion and distribution coefficients. Simulations for one million years depict maximum uranium diffusion lengths between 10 m and 35 m. With respect to the minimum requirement of a thickness of 100 m, the Opalinus Clay seems to be a suitable host rock for nuclear waste repositories.
Transport properties of potential host rocks for nuclear waste disposal are typically determined in laboratory or in-situ experiments under geochemically controlled and constant conditions. Such a homogeneous assumption is no longer applicable on the host rock scale as can be seen from the pore water profiles of the potential host rock Opalinus Clay at Mont Terri (Switzerland). The embedding aquifers are the hydro-geological boundaries, that established gradients in the 210 m thick low permeable section through diffusive exchange over millions of years. Present-day pore water profiles were confirmed by a data-driven as well as by a conceptual scenario. Based on the modelled profiles, the influence of the geochemical gradient on uranium migration was quantified by comparing the distances after one million years with results of common homogeneous models. Considering the heterogeneous system, uranium migrated up to 24 m farther through the formation depending on the source term position within the gradient and on the partial pressure of carbon dioxide pCO2 of the system. Migration lengths were almost equal for single- and multicomponent diffusion. Differences can predominantly be attributed to changes in the sorption capacity, whereby pCO2 governs how strong uranium migration is affected by the geochemical gradient. Thus, the governing parameters for uranium migration in the Opalinus Clay can be ordered in descending priority: pCO2, geochemical gradients, mineralogical heterogeneity.</p>
The Central Andes region in South America is characterized by a complex and heterogeneous deformation system. Recorded seismic activity and mapped neotectonic structures indicate that most of the intraplate deformation is located along the margins of the orogen, in the transitions to the foreland and the forearc. Furthermore, the actively deforming provinces of the foreland exhibit distinct deformation styles that vary along strike, as well as characteristic distributions of seismicity with depth. The style of deformation transitions from thin-skinned in the north to thick-skinned in the south, and the thickness of the seismogenic layer increases to the south. Based on geological/geophysical observations and numerical modelling, the most commonly invoked causes for the observed heterogeneity are the variations in sediment thickness and composition, the presence of inherited structures, and changes in the dip of the subducting Nazca plate. However, there are still no comprehensive investigations on the relationship between the lithospheric composition of the Central Andes, its rheological state and the observed deformation processes. The central aim of this dissertation is therefore to explore the link between the nature of the lithosphere in the region and the location of active deformation. The study of the lithospheric composition by means of independent-data integration establishes a strong base to assess the thermal and rheological state of the Central Andes and its adjacent lowlands, which alternatively provide new foundations to understand the complex deformation of the region. In this line, the general workflow of the dissertation consists in the construction of a 3D data-derived and gravity-constrained density model of the Central Andean lithosphere, followed by the simulation of the steady-state conductive thermal field and the calculation of strength distribution. Additionally, the dynamic response of the orogen-foreland system to intraplate compression is evaluated by means of 3D geodynamic modelling.
The results of the modelling approach suggest that the inherited heterogeneous composition of the lithosphere controls the present-day thermal and rheological state of the Central Andes, which in turn influence the location and depth of active deformation processes. Most of the seismic activity and neo--tectonic structures are spatially correlated to regions of modelled high strength gradients, in the transition from the felsic, hot and weak orogenic lithosphere to the more mafic, cooler and stronger lithosphere beneath the forearc and the foreland. Moreover, the results of the dynamic simulation show a strong localization of deviatoric strain rate second invariants in the same region suggesting that shortening is accommodated at the transition zones between weak and strong domains. The vertical distribution of seismic activity appears to be influenced by the rheological state of the lithosphere as well. The depth at which the frequency distribution of hypocenters starts to decrease in the different morphotectonic units correlates with the position of the modelled brittle-ductile transitions; accordingly, a fraction of the seismic activity is located within the ductile part of the crust. An exhaustive analysis shows that practically all the seismicity in the region is restricted above the 600°C isotherm, in coincidence with the upper temperature limit for brittle behavior of olivine. Therefore, the occurrence of earthquakes below the modelled brittle-ductile could be explained by the presence of strong residual mafic rocks from past tectonic events. Another potential cause of deep earthquakes is the existence of inherited shear zones in which brittle behavior is favored through a decrease in the friction coefficient. This hypothesis is particularly suitable for the broken foreland provinces of the Santa Barbara System and the Pampean Ranges, where geological studies indicate successive reactivation of structures through time. Particularly in the Santa Barbara System, the results indicate that both mafic rocks and a reduction in friction are required to account for the observed deep seismic events.
Rotational motions play a key role in measuring seismic wavefield properties. Using newly developed portable rotational instruments, it is now possible to directly measure rotational motions in a broad frequency range. Here, we investigated the instrumental self-noise and data quality in a huddle test in Fürstenfeldbruck, Germany, in August 2019. We compare the data from six rotational and three translational sensors. We studied the recorded signals using correlation, coherence analysis, and probabilistic power spectral densities. We sorted the coherent noise into five groups with respect to the similarities in frequency content and shape of the signals. These coherent noises were most likely caused by electrical devices, the dehumidifier system in the building, humans, and natural sources such as wind. We calculated self-noise levels through probabilistic power spectral densities and by applying the Sleeman method, a three-sensor method. Our results from both methods indicate that self-noise levels are stable between 0.5 and 40 Hz. Furthermore, we recorded the 29 August 2019 ML 3.4 Dettingen earthquake. The calculated source directions are found to be realistic for all sensors in comparison to the real back azimuth. We conclude that the five tested blueSeis-3A rotational sensors, when compared with respect to coherent noise, self-noise, and source direction, provide reliable and consistent results. Hence, field experiments with single rotational sensors can be undertaken.
Rotational motions play a key role in measuring seismic wavefield properties. Using newly developed portable rotational instruments, it is now possible to directly measure rotational motions in a broad frequency range. Here, we investigated the instrumental self-noise and data quality in a huddle test in Fürstenfeldbruck, Germany, in August 2019. We compare the data from six rotational and three translational sensors. We studied the recorded signals using correlation, coherence analysis, and probabilistic power spectral densities. We sorted the coherent noise into five groups with respect to the similarities in frequency content and shape of the signals. These coherent noises were most likely caused by electrical devices, the dehumidifier system in the building, humans, and natural sources such as wind. We calculated self-noise levels through probabilistic power spectral densities and by applying the Sleeman method, a three-sensor method. Our results from both methods indicate that self-noise levels are stable between 0.5 and 40 Hz. Furthermore, we recorded the 29 August 2019 ML 3.4 Dettingen earthquake. The calculated source directions are found to be realistic for all sensors in comparison to the real back azimuth. We conclude that the five tested blueSeis-3A rotational sensors, when compared with respect to coherent noise, self-noise, and source direction, provide reliable and consistent results. Hence, field experiments with single rotational sensors can be undertaken.
Major challenges during geothermal exploration and exploitation include the structural-geological characterization of the geothermal system and the application of sustainable monitoring concepts to explain changes in a geothermal reservoir during production and/or reinjection of fluids. In the absence of sufficiently permeable reservoir rocks, faults and fracture networks are preferred drilling targets because they can facilitate the migration of hot and/or cold fluids. In volcanic-geothermal systems considerable amounts of gas emissions can be released at the earth surface, often related to these fluid-releasing structures.
In this thesis, I developed and evaluated different methodological approaches and measurement concepts to determine the spatial and temporal variation of several soil gas parameters to understand the structural control on fluid flow. In order to validate their potential as innovative geothermal exploration and monitoring tools, these methodological approaches were applied to three different volcanic-geothermal systems. At each site an individual survey design was developed regarding the site-specific questions.
The first study presents results of the combined measurement of CO2 flux, ground temperatures, and the analysis of isotope ratios (δ13CCO2, 3He/4He) across the main production area of the Los Humeros geothermal field, to identify locations with a connection to its supercritical (T > 374◦C and P > 221 bar) geothermal reservoir. The results of the systematic and large-scale (25 x 200 m) CO2 flux scouting survey proved to be a fast and flexible way to identify areas of anomalous degassing. Subsequent sampling with high resolution surveys revealed the actual extent and heterogenous pattern of anomalous degassing areas. They have been related to the internal fault hydraulic architecture and allowed to assess favourable structural settings for fluid flow such as fault intersections. Finally, areas of unknown structurally controlled permeability with a connection to the superhot geothermal reservoir have been determined, which represent promising targets for future geothermal exploration and development.
In the second study, I introduce a novel monitoring approach by examining the variation of CO2 flux to monitor changes in the reservoir induced by fluid reinjection. For that reason, an automated, multi-chamber CO2 flux system was deployed across the damage zone of a major normal fault crossing the Los Humeros geothermal field. Based on the results of the CO2 flux scouting survey, a suitable site was selected that had a connection to the geothermal reservoir, as identified by hydrothermal CO2 degassing and hot ground temperatures (> 50 °C). The results revealed a response of gas emissions to changes in reinjection rates within 24 h, proving an active hydraulic communication between the geothermal reservoir and the earth surface. This is a promising monitoring strategy that provides nearly real-time and in-situ data about changes in the reservoir and allows to timely react to unwanted changes (e.g., pressure decline, seismicity).
The third study presents results from the Aluto geothermal field in Ethiopia where an area-wide and multi-parameter analysis, consisting of measurements of CO2 flux, 222Rn, and 220Rn activity concentrations and ground temperatures was conducted to detect hidden permeable structures. 222Rn and 220Rn activity concentrations are evaluated as a complementary soil gas parameter to CO2 flux, to investigate their potential to understand tectono-volcanic degassing. The combined measurement of all parameters enabled to develop soil gas fingerprints, a novel visualization approach. Depending on the magnitude of gas emissions and their migration velocities the study area was divided in volcanic (heat), tectonic (structures), and volcano-tectonic dominated areas. Based on these concepts, volcano-tectonic dominated areas, where hot hydrothermal fluids migrate along permeable faults, present the most promising targets for future geothermal exploration and development in this geothermal field. Two of these areas have been identified in the south and south-east which have not yet been targeted for geothermal exploitation. Furthermore, two unknown areas of structural related permeability could be identified by 222Rn and 220Rn activity concentrations.
Eventually, the fourth study presents a novel measurement approach to detect structural controlled CO2 degassing, in Ngapouri geothermal area, New Zealand. For the first time, the tunable diode laser (TDL) method was applied in a low-degassing geothermal area, to evaluate its potential as a geothermal exploration method. Although the sampling approach is based on profile measurements, which leads to low spatial resolution, the results showed a link between known/inferred faults and increased CO2 concentrations. Thus, the TDL method proved to be a successful in the determination of structural related permeability, also in areas where no obvious geothermal activity is present. Once an area of anomalous CO2 concentrations has been identified, it can be easily complemented by CO2 flux grid measurements to determine the extent and orientation of the degassing segment.
With the results of this work, I was able to demonstrate the applicability of systematic and area-wide soil gas measurements for geothermal exploration and monitoring purposes. In particular, the combination of different soil gases using different measurement networks enables the identification and characterization of fluid-bearing structures and has not yet been used and/or tested as standard practice. The different studies present efficient and cost-effective workflows and demonstrate a hands-on approach to a successful and sustainable exploration and monitoring of geothermal resources. This minimizes the resource risk during geothermal project development. Finally, to advance the understanding of the complex structure and dynamics of geothermal systems, a combination of comprehensive and cutting-edge geological, geochemical, and geophysical exploration methods is essential.
Monitoring the response of volcanic CO2 emissions to changes in the Los Humeros hydrothermal system
(2021)
Carbon dioxide is the most abundant, non-condensable gas in volcanic systems, released into the atmosphere through either diffuse or advective fluid flow. The emission of substantial amounts of CO2 at Earth's surface is not only controlled by volcanic plumes during periods of eruptive activity or fumaroles, but also by soil degassing along permeable structures in the subsurface. Monitoring of these processes is of utmost importance for volcanic hazard analyses, and is also relevant for managing geothermal resources. Fluid-bearing faults are key elements of economic value for geothermal power generation. Here, we describe for the first time how sensitively and quickly natural gas emissions react to changes within a deep hydrothermal system due to geothermal fluid reinjection. For this purpose, we deployed an automated, multi-chamber CO2 flux monitoring system within the damage zone of a deep-rooted major normal fault in the Los Humeros Volcanic Complex (LHVC) in Mexico and recorded data over a period of five months. After removing the atmospheric effects on variations in CO2 flux, we calculated correlation coefficients between residual CO2 emissions and reinjection rates, identifying an inverse correlation of rho = - 0.51 to - 0.66. Our results indicate that gas emissions respond to changes in reinjection rates within 24 h, proving an active hydraulic communication between the hydrothermal system and Earth's surface. This finding is a promising indication not only for geothermal reservoir monitoring but also for advanced long-term volcanic risk analysis. Response times allow for estimation of fluid migration velocities, which is a key constraint for conceptual and numerical modelling of fluid flow in fracture-dominated systems.
In this study, we analyzed a large seismological dataset from temporary and permanent networks in the southern and eastern Alps to establish high-precision hypocenters and 1-D V-P and V-P/V-S models. The waveform data of a subset of local earthquakes with magnitudes in the range of 1-4.2 M-L were recorded by the dense, temporary SWATH-D network and selected stations of the AlpArray network between September 2017 and the end of 2018. The first arrival times of P and S waves of earthquakes are determined by a semi-automatic procedure. We applied a Markov chain Monte Carlo inversion method to simultaneously calculate robust hypocenters, a 1-D velocity model, and station corrections without prior assumptions, such as initial velocity models or earthquake locations. A further advantage of this method is the derivation of the model parameter uncertainties and noise levels of the data. The precision estimates of the localization procedure is checked by inverting a synthetic travel time dataset from a complex 3-D velocity model and by using the real stations and earthquakes geometry. The location accuracy is further investigated by a quarry blast test. The average uncertainties of the locations of the earthquakes are below 500m in their epicenter and similar to 1.7 km in depth. The earthquake distribution reveals seismicity in the upper crust (0-20 km), which is characterized by pronounced clusters along the Alpine frontal thrust, e.g., the Friuli-Venetia (FV) region, the Giudicarie-Lessini (GL) and Schio-Vicenza domains, the Austroalpine nappes, and the Inntal area. Some seismicity also occurs along the Periadriatic Fault. The general pattern of seismicity reflects head-on convergence of the Adriatic indenter with the Alpine orogenic crust. The seismicity in the FV and GL regions is deeper than the modeled frontal thrusts, which we interpret as indication for southward propagation of the southern Alpine deformation front (blind thrusts).
This habilitation thesis includes seven case studies that examine climate variability during the past 3.5 million years from different temporal and spatial perspectives. The main geographical focus is on the climatic events of the of the African and Asian monsoonal system, the North Atlantic as well as the Arctic Ocean. The results of this study are based on marine and terrestrial climate archives obtained by sedimentological and geochemical methods, and subsequently analyzed by various statistical methods.
The results herein presented results provide a picture of the climatic background conditions of past cold and warm periods, the sensitivity of past climatic climate phases in relation to changes in the atmospheric carbon dioxide content, and the tight linkage between the low and high latitude climate system. Based on the results, it is concluded that a warm background climate state strongly influenced and/or partially reversed the linear relationships between individual climate processes that are valid today. Also, the driving force of the low latitudes for climate variability of the high latitudes is emphasized in the present work, which is contrary to the conventional view that the global climate change of the past 3.5 million years was predominantly controlled by the high latitude climate variability. Furthermore, it is found that on long geologic time scales (>1000 years to millions of years), solar irradiance variability due to changes in the Earth-Sun-Moon System may have increased the sensitivity of low and high latitudes to Influenced changes in atmospheric carbon dioxide.
Taken together, these findings provide new insights into the sensitivity of past climate phases and provide new background conditions for numerical models, that predict future climate change.
The intensification of Northern Hemisphere glaciations at the end of the Pliocene epoch marks one of the most substantial climatic shifts of the Cenozoic. Despite global cooling, sea surface temperatures in the high latitude North Atlantic Ocean rose between 2.9–2.7 million years ago. Here we present sedimentary geochemical proxy data from the Gulf of Cadiz to reconstruct the variability of Mediterranean Outflow Water, an important heat source to the North Atlantic. We find evidence for enhanced production of Mediterranean Outflow from the mid-Pliocene to the late Pliocene which we infer could have driven a sub-surface heat channel into the high-latitude North Atlantic. We then use Earth System Models to constrain the impact of enhanced Mediterranean Outflow production on the northward heat transport in the North Atlantic. In accord with the proxy data, the numerical model results support the formation of a sub-surface channel that pumped heat from the subtropics into the high latitude North Atlantic. We further suggest that this mechanism could have delayed ice sheet growth at the end of the Pliocene.