Refine
Year of publication
Document Type
- Article (95)
- Postprint (19)
- Habilitation Thesis (1)
Keywords
- Fluorescence (6)
- Europium (3)
- lanthanides (3)
- resonance energy transfer (3)
- Absorption (2)
- Anisotropy (2)
- DBD dye (2)
- DR-UV-Vis (2)
- FRET (2)
- Huminstoffe (2)
Institute
Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a–d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+.
Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a–d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+.
We report on a new three-color FRET system consisting of three fluorescent dyes, i.e., of a carbostyril (=quinolin-2(1H)-one)-derived donor D, a (bathophenanthroline)ruthenium complex as a relay chromophore A1, and a Cy dye as A2 (FRET=Forster resonance-energy-transfer) (cf. Fig. 1). With their widely matching spectroscopic properties (cf. Fig. 2), the combination of these dyes yielded excellent FRET efficiencies. Furthermore, fluorescence lifetime measurements revealed that the long fluorescence lifetime of the Ru complex was transferred to the Cy dye offering the possibility to measure the whole system in a time-resolved mode. The FRET system was established on double-stranded DNA (cf. Fig. 3) but it should also be generally applicable to other biomolecules.
Upconversion NaYF4:Yb:Er nanoparticles co-doped with Gd3+ and Nd3+ for thermometry on the nanoscale
(2015)
In the present work, the upconversion luminescence properties of oleic acid capped NaYF4:Gd3+:Yb3+:Er3+ upconversion nanoparticles (UCNP) with pure β crystal phase and Nd3+ ions as an additional sensitizer were studied in the temperature range of 288 K < T < 328 K. The results of this study showed that the complex interplay of different mechanisms and effects, causing the special temperature behavior of the UCNP can be developed into thermometry on the nanoscale, e.g. to be applied in biological systems on a cellular level. The performance was improved by the use of Nd3+ as an additional dopant utilizing the cascade sensitization mechanism in tri-doped UCNP.
Upconversion NaYF4:Yb:Er nanoparticles co-doped with Gd3+ and Nd3+ for thermometry on the nanoscale
(2015)
In the present work, the upconversion luminescence properties of oleic acid capped NaYF4:Gd3+:Yb3+:Er3+ upconversion nanoparticles (UCNP) with pure β crystal phase and Nd3+ ions as an additional sensitizer were studied in the temperature range of 288 K < T < 328 K. The results of this study showed that the complex interplay of different mechanisms and effects, causing the special temperature behavior of the UCNP can be developed into thermometry on the nanoscale, e.g. to be applied in biological systems on a cellular level. The performance was improved by the use of Nd3+ as an additional dopant utilizing the cascade sensitization mechanism in tri-doped UCNP.
Upconversion NaYF4:Yb:Er nanoparticles co-doped with Gd3+ and Nd3+ for thermometry on the nanoscale
(2015)
In the present work, the upconversion luminescence properties of oleic acid capped NaYF4:Gd3+:Yb3+:Er3+ upconversion nanoparticles (UCNP) with pure β crystal phase and Nd3+ ions as an additional sensitizer were studied in the temperature range of 288 K < T < 328 K. The results of this study showed that the complex interplay of different mechanisms and effects, causing the special temperature behavior of the UCNP can be developed into thermometry on the nanoscale, e.g. to be applied in biological systems on a cellular level. The performance was improved by the use of Nd3+ as an additional dopant utilizing the cascade sensitization mechanism in tri-doped UCNP.
Upconversion NaYF4:Yb:Er nanoparticles co-doped with Gd3+ and Nd3+ for thermometry on the nanoscale
(2015)
In the present work, the upconversion luminescence properties of oleic acid capped NaYF4:Gd3+:Yb3+:Er3+ upconversion nanoparticles (UCNP) with pure beta crystal phase and Nd3+ ions as an additional sensitizer were studied in the temperature range of 288 K < T < 328 K. The results of this study showed that the complex interplay of different mechanisms and effects, causing the special temperature behavior of the UCNP can be developed into thermometry on the nanoscale, e.g. to be applied in biological systems on a cellular level. The performance was improved by the use of Nd3+ as an additional dopant utilizing the cascade sensitization mechanism in tri-doped UCNP.
The temperature-dependent upconversion luminescence of NaYF4:Yb:Er nanoparticles (UCNP) containing different contents of Gd3+ as additional dopant was characterized. The UCNP were synthesized in a hydrothermal synthesis and stabilized with citrate in order to transfer them to the water phase. Basic characterization was carried out using TEM and DLS to determine the average size of the UCNP. The XRD technique was used to investigate the crystal lattice of the UCNP. It was found that due to the presence of Gd3+, an alteration of the lattice phase from a to beta was induced which was also reflected in the observed upconversion luminescence properties of the UCNP. A detailed analysis of the upconversion luminescence spectraespecially at ultralow temperaturesrevealed the different effects of phonon coupling between the host lattice and the sensitizer (Yb3+) as well as the activator (Er3+). Furthermore, the upconversion luminescence intensity reached a maximum between 15 and 250 K depending on Gd3+ content. In comparison to the very complex temperature behavior of the upconversion luminescence in the temperature range <273 K, the luminescence intensity ratio of H-2(11/2)-> I-4(15/2) to S-4(3/2)-> I-4(15/2) (R = G1/G2) in a higher temperature range can be described by an Arrhenius-type equation.
Ultrasound (20 kHz, 29 W. cm(-2)) is employed to form three types of erbium oxide nanoparticles in the presence of multiwalled carbon nanotubes as a template material in water. The nanoparticles are (i) erbium carboxioxide nanoparticles deposited on the external walls of multiwalled carbon nanotubes and Er(2)O(3) in the bulk with (ii) hexagonal and (iii) spherical geometries. Each type of ultrasonically formed nanoparticle reveals Er(3+) photoluminescence from crystal lattice. The main advantage of the erbium carboxioxide nanoparticles on the carbon nanotubes is the electromagnetic emission in the visible region, which is new and not examined up to the present date. On the other hand, the photoluminescence of hexagonal erbium oxide nanoparticles is long-lived (mu s) and enables the higher energy transition ((4)S(3/2)-(4)I(15/2)), which is not observed for spherical nanoparticles. Our work is unique because it combines for the first time spectroscopy of Er(3+) electronic transitions in the host crystal lattices of nanoparticles with the geometry established by ultrasound in aqueous solution of carbon nanotubes employed as a template material. The work can be of great interest for "green" chemistry synthesis of photoluminescent nanoparticles in water.
For the only water coordinated "free" uranyl (VI) aquo ion in perchlorate solution we identified and assigned several different excited states and showed that the (3)Delta state is the luminescent triplet state from transient absorption spectroscopy. With additional data from other spectroscopic methods (TRLFS, UV/vis) we generated a detailed Jablonski diagram and determined rate constants for several state transitions, like the inner conversion rate constant from the (3)Phi state to the (3)Delta state transition to be 0.35 ps(-1). In contrast to luminescence measurements, it was possible to observe the highly quenched uranyl(VI) ion in highly concentrated chloride solution by TAS and we were able to propose a dynamic quenching mechanism, where chloride complexation is followed by the charge transfer from the excited state uranyl(VI) to chloride. This proposed quenching route is supported by TD-DFT calculations.
The synthesis and photophysical properties of two new FRET pairs based on coumarin as a donor and DBD dye as an acceptor are described. The introduction of a bromo atom dramatically increases the two-photon excitation (2PE) cross section providing a 2PE-FRET system, which is also suitable for 2PE-FLIM.
The synthesis and photophysical properties of two new FRET pairs based on coumarin as a donor and DBD dye as an acceptor are described. The introduction of a bromo atom dramatically increases the two-photon excitation (2PE) cross section providing a 2PE-FRET system, which is also suitable for 2PE-FLIM.
Tuning of the excited-state properties and photovoltaic performance in PPV-based polymer blends
(2008)
Lanthanide resonance energy transfer (LRET) was used to investigate the motion of dopant ions during the synthesis of core-shell-shell-nanocrystals (NCs) that are frequently used as frequency upconversion materials. Reaction conditions (temperature, solvent) as well as lattice composition and precursors were adapted from a typical hydrothermal synthesis approach used to obtain upconversion nanoparticles (UCNPs). Instead of adding the lanthanide ions Yb3+/Er3+ as the sensitizer/activator couple, Eu3+/Nd3+ as the donor/acceptor were added as the LRET pair to the outer shell (Eu-3) and the core (Nd-3). By tailoring the thickness of the insulation shell ("middle shell"), the expected distance between the donor and the acceptor was increased beyond 2 R-0, a distance for which no LRET is expected. The successful synthesis of core- shell-shell NCs with different thicknesses of the insulation layer was demonstrated by high-resolution transmission electron microscopy measurement. The incorporation of the Eu3+ ions into the NaYF4 lattice was investigated by high-resolution time-resolved luminescence measurements. Two major Eu3+ species (bulk and surface) were found. This was supported by steady-state as well as time-resolved luminescence data. Based on the luminescence decay kinetics, the intermixing of lanthanides during synthesis of core- shell UCNPs was evaluated. The energy transfer between Eu3+ (donor) and Nd3+ (acceptor) ions was exploited to quantify the motion of the dopant ions. This investigation reveals the migration of Ln(3+) ions between different compatiments in core-shell NCs and affects the concept of using core-shell architectures to increase the efficiency of UCNPs. In order to obtain well-separated core and shell structures with different dopants, alternative concepts are needed.
Point-of-care testing (POCT) systems which allow for a sensitive, quantitative detection of protein markers are extremely useful for the early detection and therapy progress monitoring of cancer. However, currently commercially available POCT devices are mainly limited to the qualitative detection of protein markers. In this study we demonstrate the successive miniaturization of a sensitive and fast assay for the quantitative detection of prostate-specific antigen (PSA) using a well established and clinically approved homogeneous time-resolved fluoroimmunoassay technology (TRACE (R)) on a commercial plate-reader system (KRYPTOR (R)). Regarding the initial requirements for the development of POCT devices we applied a 30-fold assay volume reduction (150 mu L to 5 mu L) to achieve a reasonable lab-on-a-chip volume and a 24-fold and 120-fold excitation pulse energy reduction to achieve reasonable pulse energies for low-cost miniature excitation sources. Due to highly efficient optimization of key POCT parameters our miniaturized PSA assay achieved a 30% increased sensitivity and a 2-fold improved limit of detection compared to the standard plate-reader method. Our results demonstrate the successful implementation of key parameters for a significant miniaturization and for cost reduction in the clinically approved KRYPTOR (R) platform for protein detection. The technological alterations required are easy-to-implement and can be immediately adapted for more than 30 diagnostic protein markers already available for the KRYPTOR (R) platform. These features strongly recommend our assay format to be utilized in innovative, sensitive, quantitative POCT of protein markers.
Time-resolved photoluminescence analysis of distribution and migration of terbium ions in zeolites X
(2004)
The photoluminescence (PL) dynamics of terbium-exchanged zeolites X was investigated upon laser excitation at 355 nm. The results evidenced the presence of at least two terbium main environments with PL lifetimes varying between 391-411 and 753-770 mus. The two-site nature of terbium distribution in zeolites X permitted a quantitative analysis of the migration process of terbium ions inside the pores and cavities upon dehydration in air at 200 degreesC. Besides the increase of the PL lifetimes with about 30% and 80% compared to those of the hydrated zeolite, a fraction of almost 30% of terbium ions was estimated to migrate from the supercages to the neighboring sodalites or hexagonal prisms. Our results evidenced for the first time the capability of time-resolved luminescence spectroscopy in quantitatively tracking for the intrazeolitic migration of lanthanides. (C) 2004 Elsevier B.V. All rights reserved
The formation of secondary Ln(III) solid phases (e.g. Nd(OH)CO3 and Sm(OH)CO3) has been studied as a function of the humic acid (HA) concentration in 0.1 M NaClO4 aqueous solution and their solubility has been investigated in the neutral pH range (6.5-8) under normal atmospheric conditions. Nd(III) and Sm(III) were selected as analogues for trivalent lanthanide and actinide ions. The solid phases under investigation have been prepared by alkaline precipitation and characterized by TGA, ATR-FTIR, XRD, TRLFS, DR-UV-Vis and Raman spectroscopy, and solubility measurements. The spectroscopic data obtained indicate that Nd(OH)CO3 and Sm(OH)CO3 are stable and remain the solubility limiting solid phases even in the presence of increased HA concentration (0.5 g/L) in solution. Upon base addition in the Ln(III)-HA system decomplexation of the previously formed Ln(III)-humate complexes and precipitation of two distinct phases occurs, the inorganic (Ln(OH)CO3) and the organic phase (HA), which is adsorbed on the particle surface of the former. Nevertheless, HA affects the particle size of the solid phases. Increasing HA concentration results in decreasing crystallite size of the Nd(OH)CO3 and increasing crystallite size of the Sm(OH)CO3 solid phase, and affects inversely the solubility of the solid phases. However, this impact on the solid phase properties is expected to be of minor relevance regarding the chemical behavior and migration of trivalent lanthanides and actinides in the geosphere.
Fluorescence probes consisting of well-established fluorophores in combination with rigid molecular rods based on spirane-type structures were investigated with respect to their fluorescence properties under different solvent conditions. The attachment of the dyes was accomplished by 1,3-dipolar cycloaddition between alkynes and azides (click' reaction) and is a prime example for a novel class of sensor constructs. Especially, the attachment of two (different) fluorophores on opposite sides of the molecular rods paves the way to new sensor systems with less bulky (compared to the conventional DNA- or protein-based concepts), nevertheless rigid spacer constructs, e.g., for FRET-based sensing applications. A detailed photophysical characterization was performed in MeOH (and in basic H2O/MeOH mixtures) for i) rod constructs containing carboxyfluorescein, ii) rod constructs containing carboxyrhodamine, iii) rod constructs containing both carboxyfluorescein and carboxyrhodamine, and iv) rod constructs containing both pyrene and perylene parts. For each dye (pair), two rod lengths with different numbers of spirane units were synthesized and investigated. The rod constructs were characterized in ensemble as well as single-molecule fluorescence experiments with respect to i) specific roddye and ii) dyedye interactions. In addition to MeOH and MeOH/NaOH, the rod constructs were also investigated in micellar systems, which were chosen as a simplified model for membranes.
The adsorption of boron (boric acid) from aqueous solutions on alumina has been investigated at pH 8.0, I=0.1M NaClO4, T=22 +/- 3 degrees C, and under normal atmospheric conditions. The characterization of the adsorbed species was performed by Raman spectroscopy and the spectroscopic speciation was assisted by theoretical DFT calculations. Evaluation of the spectroscopic data points to the formation of inner-sphere surface complexes and indicates the formation of two different types of adsorbed boron species. The theoretical calculations corroborate the spectroscopic data and indicate that at low boron concentration the monodentate surface species dominates, whereas increased boron concentration favors the formation of a bidentate surface species. Assuming low coverage, the conditional formation constant for the monodentate surface species has been evaluated to be log=4.1 +/- 0.1.
Two different types of mesoporous silicon-phosphate supports using different surfactants (a mixture of (CH3)(3)C13H27NBr with an organophosphorus coupling molecule (HO-PO(i-C3H7)(2)) and with a co-surfactant ((C2H5)(3)(C6H5)PCl), respectively) were synthesized. Trivalent europium (Eu) ions were immobilized via ion-exchange on these supports. The resulting materials were characterized using nitrogen adsorption isotherms at -196 degrees C, thermogravimetric analysis, SEM, TEM, FT-IR, PXRD, CP/MAS. (HSi)-H-1-Si-29 and P-31 NMR, DR-UV-vis as well as steady- state and time-resolved photoluminescence spectroscopy. The results evidenced that the co-polymerization of silicon and phosphorous yielded a unique morphology in these materials. Following calcination at 450 and 900 degrees C europium- exchanged silicon-phosphates with great surface area (BET=600-705 m(2) g(-1)) and 3.4 nm sized mesopores were obtained. The differences among the optical properties of the non-calcined europium materials such as the emission lifetimes, local environment at the europium sites or the relative contribution of the upper excited levels to the total photoluminescence were assigned to the surfactants used in the synthesis. Calcination of the silicon-phosphates at higher temperatures than 450 degrees C did not induce major changes in the structural properties: in contrast, photoluminescence properties of europium were markedly improved in terms of intensity and average lifetime.
Steady-state and time-resolved fluorescence methods were applied to investigate the fluorescence properties of humic substances of different origins. Using standard 2D emission and total luminescence spectra, fluorescence maxima, the width of the fluorescence band and a relative fluorescence quantum efficiency were determined. Different trends for fulvic acids and humic acids were observed indicating differences in the heterogeneity of the sample fractions. The complexity of the fluorescence decay of humic substances is discussed and compared to simple model compounds. The effect of oxidation of humic substances on their fluorescence properties is discussed as well.
The formation of secondary Ln(III) solid phases (e.g., Nd-2(CO3)(3) and Sm-2(CO3)(3)) was studied as a function of the humic acid concentration in 0.1 mol/L NaClO4 aqueous solution in the neutral pH range (5-6.5). The solid phases under investigation were prepared by alkaline precipitation under 100% CO2 atmosphere and characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), time-resolved laser fluorescence spectroscopy (TRLFS), diffuse reflectance ultraviolet-visible (DR-UV-Vis), Raman spectroscopy, and solubility measurements. The spectroscopic data obtained indicated that Nd-2(CO3)(3) and Sm-2(CO3)(3) were stable and remained the solubility limiting solid phases even in the presence of increased humic acid concentration (0.5 g/L) in solution. Upon base addition in the Ln(III)-HA system, decomplexation of the previously formed Ln(III)-humate complexes and precipitation of two distinct phases occurred, the inorganic (Ln(2)(CO3)(3)) and the organic phase (HA), which was adsorbed on the particle surface of the former. Nevertheless, humic acid affected the particle size of the solid phases. Increasing humic acid concentration resulted in decreasing crystallite size of the Nd-2(CO3)(3) and increasing crystallite size of the Sm-2(CO3)(3) solid phase, and affected inversely the solubility of the solid phases. However, this impact on the solid phase properties was expected to be of minor relevance regarding the chemical behavior and migration of trivalent lanthanides and actinides in the geosphere.
In order to obtain information on the number and symmetry of the different Eu3+ complexes formed with several hydroxybenzoic acids, ultra-low temperature luminescence measurements at 4.7 K were carried out. Hydroxybenzoic acids were used as simple model compounds for metal binding structures in humic substances (HS). Information on the complexes was extracted from high-resolution total luminescence spectra (TLS), which were obtained by scanning through the D-5(0) <-- F-7(0) transition of Eu(III) with a pulsed dye laser and measuring the emission in the wavelength range of the D- 5(0) --> F-7(0) and D-5(0) --> F-7(0) transitions simultaneously. By extracting the crystal field strength parameter N- v(B-2q) from the TLS, it was found that N-v(B-2q) was not directly correlated with the excitation energy. Further, the symmetry of the individual complexes formed was extracted from the experimental data. (C) 2007 Elsevier B.V. All rights reserved.
The competition between REE, alkaline earth and d-transition metals for organic matter binding sites is still an open field of research; particularly, the mechanisms governing these phenomena need to be characterized in more detail. In this study, we examine spectroscopically the mechanisms of competitive binding of Eu(III)/Cu(II) and Eu(III)/ Ca(II) pair to Gorleben humic acid (HA), as previously proposed in the framework of the NICA-Donnan model. The evolution of time-resolved laser induced luminescence spectra of humic-complexed Eu(Ill) showed two strikingly different environments for a comparable bound proportion for Cu(II) and Ca(II). Cu(II) seems to compete more effectively with Eu(III) inducing its release into the Donnan phase, and into the bulk solution as free Eu3+. This is evidenced both by the shapes of the spectra and by the decrease in the luminescence decay times. In contrast with that, Ca(II) induces a modification of the HA structure, which enhances the luminescence of humic-bound Eu(III), and causes a minor modification of the chemical environment of the complexed rare earth ion.
Species-related luminescence-structure relationships in europium-exchanged mesoporous material
(2009)
Europium exchanged into a mesoporous material (Zeotile-1) was extensively characterized with respect to the Si/ Al ratio and surface silylation by using time-resolved emission spectroscopy. Qualitative as well as quantitative details of the europium species-related luminescence-structure relationships were obtained and discussed such as the decay associated spectra, local distortion and structure of the bonding environment, crystal-field strength, radiative relaxation rates, and the quantum efficiency. Thus, two europium species were found in the parent as well as in the silylated materials: one species located on the internal surface and the second inside the 2-2.5 nm pores. The species located on the internal surface is characterized by photoluminescence decay times of 105 mu s <tau < 125 mu s, an asymmetry value R of 0.6 < R < 0.8, and a quantum efficiency of 2%-2.5%. Upon silylation, the photoluminescence decay times, the asymmetry values, and the quantum efficiency were increased to 160 mu s <tau < 180 mu s, 1.7 < R < 2.1, and similar to 4%, respectively. Following silylation, the number of water molecules is reduced in the first coordination shell of the europium species located on the internal surface from eight to nine to about five. On the other hand, the europium species located inside the pores showed a much longer photoluminescence decay time (460 mu s <tau < 560 mu s) and a much higher asymmetry ratio (5 < R < 6.5). The related photoluminescence efficiency was 26%-30%. An average of one up to two water molecules in the first coordination shell of the europium species located inside the pores was estimated for both parent and silylated materials.
Vibrationally resolved fluorescence spectra of four angular [N]phenylenes were recorded with laser excited Shpol’skii spectroscopy (LESS) in an n-octane matrix at 10 K. In general, the same vibrational frequencies were observed in the fluorescence excitation and emission spectra, indicating that the geometries of ground and electronically excited state are very similar. Because of intensity borrowing from the S2 state, vibrations of two different symmetries were observed in the fluorescence excitation spectra of angular [3]phenylene and zig-zag[5]phenylene. This finding allowed the location of the S2 state for these compounds. DFT calculations(RB3LYP/6-31G*) of the ground state vibrational frequencies were made. The calculated vibrational modes were in reasonably good agreement with the experimental data. A new very low-frequency vibration of approximately 100 cm-1 was predicted and experimentally confirmed for all [N]phenylenes investigated. This vibration seems to be unique for [N]phenylenes and is attributed to an in-plane movement of the carbon backbone.
Oligospirothioketal (OSTK) rods are presented as an adjustable scaffold for optical membrane probes. The OSTK rods are readily incorporated into lipid bilayers due to their hydrophobic backbones. Because of their high length-over-diameter aspect ratio, only a minimal disturbance of the lipid bilayer is caused. OSTK rods show outstanding rigidity and allow defined labeling with fluorescent dyes, yielding full control of the orientation between the dye and OSTK skeleton. This. allows the construction of novel Forster resonance energy transfer probes with highly defined relative orientations of the transition dipole moments of the donor and acceptor dyes and makes the class of OSTK probes a power-fill, flexible toolbox for optical biosensing applications. Data on steady-state and time-resolved fluorescence experiments investigating the incorporation of coumarin- and [1,3]-dioxolo[4,5-f][1,3]benzo-dioxole-labeled OSTKs in large unilamellar vesicles are presented as a show case.
Rapid Synthesis of Sub-10nm Hexagonal NaYF4-Based Upconverting Nanoparticles using Therminol((R))66
(2018)
We report a simple one-pot method for the rapid preparation of sub-10nm pure hexagonal (-phase) NaYF4-based upconverting nanoparticles (UCNPs). Using Therminol((R))66 as a co-solvent, monodisperse UCNPs could be obtained in unusually short reaction times. By varying the reaction time and reaction temperature, it was possible to control precisely the particle size and crystalline phase of the UCNPs. The upconversion (UC) luminescence properties of the nanocrystals were tuned by varying the concentrations of the dopants (Nd3+ and Yb3+ sensitizer ions and Er3+ activator ions). The size and phase-purity of the as-synthesized core and core-shell nanocrystals were assessed by using complementary transmission electron microscopy, dynamic light scattering, X-ray diffraction, and small-angle X-ray scattering studies. In-depth photophysical evaluation of the UCNPs was pursued by using steady-state and time-resolved luminescence spectroscopy. An enhancement in the UC intensity was observed if the nanocrystals, doped with optimized concentrations of lanthanide sensitizer/activator ions, were further coated with an inert/active shell. This was attributed to the suppression of surface-related luminescence quenching effects.
Rapid synthesis of sub-10 nm hexagonal NaYF4-based upconverting nanoparticles using Therminol® 66
(2018)
We report a simple one-pot method for the rapid preparation of sub-10nm pure hexagonal (-phase) NaYF4-based upconverting nanoparticles (UCNPs). Using Therminol((R))66 as a co-solvent, monodisperse UCNPs could be obtained in unusually short reaction times. By varying the reaction time and reaction temperature, it was possible to control precisely the particle size and crystalline phase of the UCNPs. The upconversion (UC) luminescence properties of the nanocrystals were tuned by varying the concentrations of the dopants (Nd3+ and Yb3+ sensitizer ions and Er3+ activator ions). The size and phase-purity of the as-synthesized core and core-shell nanocrystals were assessed by using complementary transmission electron microscopy, dynamic light scattering, X-ray diffraction, and small-angle X-ray scattering studies. In-depth photophysical evaluation of the UCNPs was pursued by using steady-state and time-resolved luminescence spectroscopy. An enhancement in the UC intensity was observed if the nanocrystals, doped with optimized concentrations of lanthanide sensitizer/activator ions, were further coated with an inert/active shell. This was attributed to the suppression of surface-related luminescence quenching effects.
Characterization of interactions between antigens and antibodies is of utmost importance both for fundamental understanding of the binding and for development of advanced clinical diagnostics. Here, fluorescence line-narrowing (FLN) spectroscopy was used to study physicochemical interactions between 3-hydroxybenzo[a]pyrene (3OH-BaP, as antigen) and a variety of solvent matrices (as model systems) or anti-polycyclic aromatic hydrocarbon antibodies (anti-PAH). We focused the studies on the specific physicochemical interactions between 3OH-BaP and different, previously obtained, monoclonal and recombinant anti-PAH antibodies. Control experiments performed with non-binding monoclonal antibodies and bovine serum albumin (BSA) indicated that nonspecific interactions did not affect the FLN spectrum of 3OH-BaP. The spectral positions and relative intensities of the bands in the FLN spectra are highly dependent on the molecular environment of the 3OH-BaP. The FLN bands correlate with different vibrational modes of 3OH-BaP which are affected by interactions with the molecular environment (pi-pi interactions, H-bonding, or van-der-Waals forces). Although the analyte (3OH-BaP) was the same for all the antibodies investigated, different binding interactions could be identified from the FLN spectra on the basis of structural flexibility and conformational multiplicity of the antibodies' paratopes.
To determine whether Forster resonance energy transfer (FRET) measurements can provide quantitative distance information in single-molecule fluorescence experiments on polypeptides, we measured FRET efficiency distributions for donor and acceptor dyes attached to the ends of freely diffusing polyproline molecules of various lengths. The observed mean FRET efficiencies agree with those determined from ensemble lifetime measurements but differ considerably from the values expected from Forster theory, with polyproline treated as a rigid rod. At donor-acceptor distances much less than the Forster radius R-o, the observed efficiencies are lower than predicted, whereas at distances comparable to and greater than R-0, they are much higher. Two possible contributions to the former are incomplete orientational averaging during the donor lifetime and, because of the large size of the dyes, breakdown of the point-dipole approximation assumed in Forster theory. End-to-end distance distributions and correlation times obtained from Langevin molecular dynamics simulations suggest that the differences for the longer polyproline peptides can be explained by chain bending, which considerably shortens the donor-acceptor distances
To determine whether Förster resonance energy transfer (FRET) measurements can provide quantitative distance information in single-molecule fluorescence experiments on polypeptides, we measured FRET efficiency distributions for donor and acceptor dyes attached to the ends of freely diffusing polyproline molecules of various lengths. The observed mean FRET efficiencies agree with those determined from ensemble lifetime measurements but differ considerably from the values expected from Förster theory, with polyproline treated as a rigid rod. At donor–acceptor distances much less than the Förster radius R0, the observed efficiencies are lower than predicted, whereas at distances comparable to and greater than R0, they are much higher. Two possible contributions to the former are incomplete orientational averaging during the donor lifetime and, because of the large size of the dyes, breakdown of the point-dipole approximation assumed in Förster theory. End-to-end distance distributions and correlation times obtained from Langevin molecular dynamics simulations suggest that the differences for the longer polyproline peptides can be explained by chain bending, which considerably shortens the donor–acceptor distances.
Zeolites NaY and ZSM-5 were used as hosts for styrene polymerization after ion-exchange with europium ions. The parent and hybrid, polystyrene coated Eu-NaY (Eu-NaY/PS) and Eu-ZSM-5 (Eu-ZSM-5/PS) zeolites were investigated by using thermal analysis, SEM, PXRD, FT-IR, DR-UV/Vis, steady state and time-resolved photoluminescence spectroscopy. FT-IR spectra evidenced for the interaction between the zeolitic hosts and polystyrene while the PXRD spectra supported for the presence of the polymer inside the channels/pores of Eu-NaY/PS and Eu-ZSM-5/PS materials. The optical properties of Eu-NaY/PS and Eu-ZSM-5/PS were significantly changed relative to those of the parent zeolites, giving further evidence for the presence of polymer inside zeolites. An interesting case is presented by NaY zeolite: following styrene polymerization, the polymer interacted selectively with one of the two main species co-existing inside zeolite while for ZSM-5 a similar effect was not observed.
A new generation of wavelength-tunable, fluorescent dyes, so-called DBD ([1,3]dioxolo[4,5-f][1,3]benzodioxole) dyes, were developed a few years ago, and they showed great potential as probes, for example, for fluorescence microscopy. However, their photophysics is not fully explored and leaves open questions regarding their large fluorescence Stokes shifts and sensitivity to solvent conditions of differently substituted DBD dyes. To improve the understanding of the influence of the substitution pattern of the DBD dyes on their respective photophysics, transient absorption spectroscopy (TAS) was used, that is, a pump-probe experiment on the femtosecond timescale. TAS allows measurements of excited states, ground state recovery, solvent relaxation, and fluorescence properties on time scales of up to several nanoseconds. Two different DBD dye samples were investigated: aryl- and ester-substituted DBD dyes. Experiments were carried out in solvents with different polarities using different excitation energies and at different viscosities. Based on the experimental data and theoretical calculations, we were able to determine the conformational changes of the molecule due to electronic excitation and were able to investigate solvent relaxation processes for both types of DBD dyes. By generalizing the theory for quadrupole-induced solvent relaxation developed by Togashi et al., we derived quadrupole moments of both molecules in the ground and excited state. Our data showed differences in the binding of polar solvent molecules to the dyes depending on the substituent on the DBD dye. In the case of water as the solvent, an additional efficient quenching process in the electronically excited state was revealed, which was indicated by the observation of solvated electrons in the TAS signals.
In the study a dyad (C6 probe), constructed of two dyes with highly different hydrophobicities, was investigated by steady-state and time-resolved spectroscopic techniques in chloroform, methanol, and in phospholipid vesicles, respectively. The dyad was built on two dyes: the lipophilic benzo[a]pyrene (BaP) and the hydrophilic sulforhodamine B (SRB). The dyes were linked via a short, but flexible alkyl chain (six C-atoms). Based on their spectroscopic properties, BaP and SRB showed a very efficient non-radiative resonance energy transfer in solution. Incorporation into a lipid bilayer limited the relative flexibility (degree of freedom) between donor and acceptor and was used for the investigation of fundamental photophysical aspects (especially of FRET) as well as to elucidate the potential of the dyad to probe the interface of vesicles (or cells). The location of the two dyes in vesicles and their respective accessibility for interactions with dye-specific antibodies was investigated. Based on the alteration of the anisotropy, on the rotational correlation time as well as on the diffusion coefficient the incorporation of the C6 probe into the vesicles was evaluated. Especially the limitation in the relative movements of the two dyes was considered and used to differentiate between potential parameters, that influence the energy transfer in the dyad. Transient absorption spectroscopy (TAS) and pulsed-interleave single molecule fluorescence experiments were performed to better understand the intramolecular interactions in the dyad. Finally, in a showcase for a biosensing application of the dyads, the binding of an SRB-specific antibody was investigated when the dyad was incorporated in vesicles.
A series of terbium- and europium-exchanged microporous-mesoporous zeolite Socony Mobil Five (MFI)-type materials such as Zeotile-1 and Zeogrid with varying Si/Al ratios was investigated using FTIR, PXRD, adsorption- desorption isotherms of N-2 at 77 K and time-resolved luminescence spectroscopy. Silylation of the lanthanides-exchanged Zeotile-1 and Zeogrid with hexadecyl trimethoxysilanes via post-synthesis grafting was also studied. The results showed that the lanthanide's photoluminescence spectra and decays were modified due to silylation. The different silylation effects in Zeotile-1 and Zeogrid were correlated with the textural properties of the investigated materials. (C) 2007 Elsevier B.V. All rights reserved.
Here we report on photo-isomerization of azobenzene containing surfactants induced during irradiation with near-infrared (NIR) light in the presence of upconversion nanoparticles (UCNPs) acting as mediator. The surfactant molecule consists of charged head group and hydrophobic tail with azobenzene group incorporated in alkyl chain. The azobenzene group can be reversible photo-isomerized between two states: trans- and cis- by irradiation with light of an appropriate wavelength. The trans-cis photo-isomerization is induced by UV light, while cis-trans isomerization proceeds either thermally in darkness, or can be accelerated by exposure to illumination with a longer wavelength typically in a blue/green range. We present the application of lanthanide doped UCNPs to successfully switch azobenzene containing surfactants from cis to trans conformation in bulk solution using NIR light. Using Tm-3(+) or Er-3(+) as activator ions, the UCNPs provide emissions in the spectral range of 450 nm < lambda(em) < 480 nm (for Tm-3(+), three and four photon induced emission) or 525 nm < lambda(em) < 545 nm (for Er-3(+), two photon induced emission), respectively. Especially for UCNPs containing Tm-3(+) a good overlap of the emissions with the absorption bands of the azobenzene is present. Under illumination of the surfactant solution with NIR light (lambda(ex) = 976 nm) in the presence of the Tm-3(+)-doped UCNPs, the relaxation time of cis-trans photo-isomerization was increased by almost 13 times compared to thermally induced isomerization. The influence of thermal heating due to the irradiation using NIR light was shown to be minor for solvents not absorbing in NIR spectral range (e.g. CHCl3) in contrast to water, which shows a distinct absorption in the NIR.
9,10-substituted anthracenes are known for their useful optical properties like fluorescence, which makes them frequently used probes in sensing applications. In this article, we investigate the fundamental photophysical properties of three pyridyl-substituted variants. The nitrogen atoms in the pyridinium six-membered rings are located in the ortho-, meta-, and para-positions in relation to the anthracene core. Absorption, fluorescence, and transient absorption measurements were carried out and were complemented by theoretical calculations. We monitored the photophysics of the anthracene derivatives in chloroform and water investigating the protonated as well as their nonprotonated forms. We found that the optical properties of the nonprotonated forms are strongly determined by the anthracene chromophore, with only small differences to other 9,10-substituted anthracenes, for example diphenyl anthracene. In contrast, protonation leads to a strong decrease in fluorescence intensity and lifetime. Transient absorption measurements and theoretical calculations revealed the formation of a charge-transfer state in the protonated chromophores, where electron density is shifted from the anthracene moiety toward the protonated pyridyl substituents. While the para- and ortho-derivatives' charge transfer is still moderately fluorescent, the meta-derivative is affected much stronger and shows nearly no fluorescence. This nitrogen-atom-position-dependent sensitivity to hydronium activity makes a combination of these fluorophores very attractive for pH-sensing applications covering a broadened pH range.
In this work, the photophysical properties of two oxazine dyes (ATTO 610 and ATTO 680) covalently attached via a C6-amino linker to the 5'-end of short single-stranded as well as double-stranded DNA (ssDNA and dsDNA, respectively) of different lengths were investigated. The two oxazine dyes were chosen because of the excellent spectral overlap, the high extinction coefficients, and the high fluorescence quantum yield of ATTO 610, making them an attractive Forster resonance energy transfer (FRET) pair for bioanalytical applications in the far-red spectral range. To identify possible molecular dye-DNA interactions that cause photophysical alterations, we performed a detailed spectroscopic study, including time-resolved fluorescence anisotropy and fluorescence correlation spectroscopy measurements. As an effect of the DNA conjugation, the absorption and fluorescence maxima of both dyes were bathochromically shifted and the fluorescence decay times were increased. Moreover, the absorption of conjugated ATTO 610 was spectrally broadened, and a dual fluorescence emission was observed. Steric interactions with ssDNA as well as dsDNA were found for both dyes. The dye-DNA interactions were strengthened from ssDNA to dsDNA conjugates, pointing toward interactions with specific dsDNA domains (such as the top of the double helix). Although these interactions partially blocked the dye-linker rotation, a free (unhindered) rotational mobility of at least one dye facilitated the appropriate alignment of the transition dipole moments in doubly labeled ATTO 610/ATTO 680-dsDNA conjugates for the performance of successful FRET. Considering the high linker flexibility for the determination of the donor-acceptor distances, good accordance between theoretical and experimental FRET parameters was obtained. The considerably large Forster distance of similar to 7 nm recommends the application of this FRET pair not only for the detection of binding reactions between nucleic acids in living cells but also for monitoring interactions of larger biomolecules such as proteins.
Die Anwendung von optischen Parametern zur Stoffcharakterisierung wird diskutiert. Dabei ist der Schwerpunkt der Diskussion auf absorptions- und fluoreszenzspektroskopische Methoden gesetzt. Beide Methoden können schnell und zuverlässig – auch im on-line Betrieb – eingesetzt werden. Der Beitrag soll einen Überblick über die grundlegenden Möglichkeiten der Anwendung beider Methoden geben.
Im vorliegenden Beitrag wird an Hand dreier Beispiele der Einsatz von optischer Sensorik zur Produktcharakterisierung dargestellt, nämlich Untersuchungen zum O2-Gehalt in Fruchtsäften, zur Isotopiesignatur von CO2 in Mineralwässern und zu Lichtstreueigenschaften eines Sonnenschutzmittels. Inhalt: Bestimmung von O2 mit Lumineszenzsonden Isotopenselektive Bestimmung von CO2 mit TDLAS Optische Charakterisierung stark streuender Materialien mit Photonendichtewellen
Optical methods play an important role in process analytical technologies (PAT). Four examples of optical process and quality sensing (OPQS) are presented, which are based on three important experimental techniques: near-infrared absorption, luminescence quenching, and a novel method, photon density wave (PDW) spectroscopy. These are used to evaluate four process and quality parameters related to beer brewing and polyurethane (PU) foaming processes: the ethanol content and the oxygen (O2) content in beer, the biomass in a bioreactor, and the cellular structures of PU foam produced in a pilot production plant.