Refine
Document Type
- Article (14)
- Habilitation Thesis (1)
- Other (1)
- Postprint (1)
Language
- English (17)
Is part of the Bibliography
- yes (17) (remove)
Keywords
- Mesoporous silicon (2)
- X-ray emission (2)
- X-ray photoelectron spectroscopy (2)
- soft X-ray beamline (2)
- soft X-ray spectroscopy (2)
- BESSY II (1)
- BESSY II. (1)
- Crystallization (1)
- CuI (1)
- Elasticity (1)
Institute
Phase equilibria that are relevant for the growth of Bi2MO4 have been studied experimentally, and the ternary phase diagrams of Bi2O3-PdO2-Pd and Bi2O3-Cu2O-CuO and its isopleth section Bi2O3-CuO were redetermined. It is shown that every melting and crystallization process is always accompanied by a redox process at the phase boundary and that for both title compounds, the valence of the transition metal is lowered during melting. Vice versa, during crystal growth, O-2 must be transported through the melt to the phase boundary. Based on these new insights provided by our thermodynamic studies, Bi2CuO4 single crystals with a length of up to 7 cm and a diameter of 6 mm were grown by the OFZ technique to be used for investigations of magnetic, electronic and thermal transport properties. The grown crystals were characterized by powder X-ray diffraction, Laue, magnetization and specific heat measurements.
Materials realizing the XY model in two dimensions are sparse.
Here we use neutron triple-axis spectroscopy to investigate the critical static and dynamical magnetic fluctuations in the square-lattice antiferromagnets Ca2RuO4 and Ca3Ru2O7.
We probe the temperature dependence of the antiferromagnetic Bragg intensity, the Q width, the amplitude, and the energy width of the magnetic diffuse scattering in the vicinity of the Neel temperature T-N to determine the critical behavior of the magnetic order parameter M, correlation length xi, susceptibility chi, and the characteristic energy Gamma with the corresponding critical exponents beta, nu, gamma, and z, respectively.
We find that the critical behaviors of the single-layer compound Ca2RuO4 follow universal scaling laws that are compatible with predictions of the two-dimensional (2D) XY model.
The bilayer compound Ca3Ru2O7 is only partly consistent with the 2D XY theory and best described by the three-dimensional (3D) Ising model, which is likely a consequence of the intrabilayer exchange interactions in combination with an orthorhombic single-ion anisotropy.
Hence, our results suggest that layered ruthenates are promising solid-state platforms for research on the 2D XY model and the effects of 3D interactions and additional spin-space anisotropies on the magnetic fluctuations.
Transparent conductive materials based on indium oxide remain yet irreplaceable in various optoelectronic applications. Amorphous oxides appear especially attractive for technology as they are isotropic, demonstrate relatively high electron mobility and can be processed at low temperatures. Among them is indium zinc oxide (IZO) with a large zinc content that is crucial for keeping the amorphous state but redundant for the doping. In this work we investigated water-free and water containing IZO films obtained by radio frequency sputtering. The correlation between temperature driven changes of the chemical state, the optical and electrical properties as well as the progression of crystallization was in focus. Such characterization methods as: scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, temperature dependent Hall-effect measurements and others were applied. Temperature dependent electrical properties of amorphous IZO and IZO:H2O films were found to evolve similarly. Based on our experience in In2O3:H2O (In2O3:H or IOH) we proposed an explanation for the changes observed. Water admixture was found to decrease crystallization temperature of IZO significantly from similar to 550 degrees C to similar to 280 degrees C. Herewith, the presence and concentration of water and/or hydroxyls was found to determine Zn distribution in the film. In particular, Zn enrichment was detected at the film's surface respective to the high water and/or hydroxyl amount. Raman spectra revealed a two-dimensional crystallization of w-ZnO which precedes regardless water presence an extensive In2O3 crystallization. An abrupt loss of electron mobility as a result of crystallization was attributed to the formation of ZnO interlayer on grain boundaries.
The performance of the recently commissioned spectrometer PEAXIS for resonant inelastic soft X-ray scattering (RIXS) and X-ray photoelectron spectroscopy and its hosting beamline U41-PEAXIS at the BESSY II synchrotron are characterized. The beamline provides linearly polarized light from 180 eV to 1600 eV allowing for RIXS measurements in the range 200-1200 eV. The monochromator optics can be operated in different configurations to provide either high flux with up to 10(12) photons s(-1) within the focal spot at the sample or high energy resolution with a full width at half maximum of <40 meV at an incident photon energy of similar to 400 eV. The measured total energy resolution of the RIXS spectrometer is in very good agreement with theoretically predicted values obtained by ray-tracing simulations. PEAXIS features a 5 m-long RIXS spectrometer arm that can be continuously rotated about the sample position by 106 degrees within the horizontal photon scattering plane, thus enabling the study of momentum-transfer-dependent excitations. Selected scientific examples are presented to demonstrate the instrument capabilities, including measurements of excitations in single-crystalline NiO and in liquid acetone employing a fluid cell sample manipulator. Planned upgrades of the beamline and the RIXS spectrometer to further increase the energy resolution to similar to 100 meV at 1000 eV incident photon energy are discussed.
The performance of the recently commissioned spectrometer PEAXIS for resonant inelastic soft X-ray scattering (RIXS) and X-ray photoelectron spectroscopy and its hosting beamline U41-PEAXIS at the BESSY II synchrotron are characterized. The beamline provides linearly polarized light from 180 eV to 1600 eV allowing for RIXS measurements in the range 200-1200 eV. The monochromator optics can be operated in different configurations to provide either high flux with up to 10(12) photons s(-1) within the focal spot at the sample or high energy resolution with a full width at half maximum of <40 meV at an incident photon energy of similar to 400 eV. The measured total energy resolution of the RIXS spectrometer is in very good agreement with theoretically predicted values obtained by ray-tracing simulations. PEAXIS features a 5 m-long RIXS spectrometer arm that can be continuously rotated about the sample position by 106 degrees within the horizontal photon scattering plane, thus enabling the study of momentum-transfer-dependent excitations. Selected scientific examples are presented to demonstrate the instrument capabilities, including measurements of excitations in single-crystalline NiO and in liquid acetone employing a fluid cell sample manipulator. Planned upgrades of the beamline and the RIXS spectrometer to further increase the energy resolution to similar to 100 meV at 1000 eV incident photon energy are discussed.
We present a combined microscopic and macroscopic study of YbxCo4Sb12 skutterudites for a range of nominal filling fractions, 0.15 < x < 0.75. The samples were synthesized using two different methods — a melt–quench–annealing route in evacuated quartz ampoules and a non-equilibrium ball-mill route — for which we directly compare the crystal structure and phase composition as well as the thermoelectric properties. Rietveld refinements of high-quality neutron powder diffraction data reveal about a 30–40% smaller Yb occupancy on the crystallographic 2a site than nominally expected for both synthesis routes. We observe a maximum filling fraction of at least 0.439(7) for a sample synthesized by the ball-mill routine, exceeding theoretical predictions of the filling fraction limit of 0.2–0.3. A single secondary phase of CoSb2 is observed in ball-mill-synthesized samples, while two secondary phases, CoSb2 and YbSb2, are detected for samples prepared by the ampoule route. A detrimental influence of the secondary phases on the thermoelectric properties is observed for secondary-phase fractions larger than 8 wt % regardless of the kind of secondary phase. The largest figure of merit of all samples with a ZT ∼ 1.0 at 723 K is observed for the sample with a refined Yb content of x2a = 0.159(3), synthesized by the ampoule route.
We present a study of the control of electric field induced strain on the magnetic and electrical transport properties in a magnetoelastically coupled artificial multiferroic Fe3O4/BaTiO3 heterostructure.
In this Fe3O4/BaTiO3 heterostructure, the Fe3O4 thin film is epitaxially grown in the form of bilateral domains, analogous to a-c stripe domains of the underlying BaTiO3(001) substrate.
By in situ electric field dependent magnetization measurements, we demonstrate the extrinsic control of the magnetic anisotropy and the characteristic Verwey metal-insulator transition of the epitaxial Fe3O4 thin film in a wide temperature range between 20-300 K, via strain mediated converse magnetoelectric coupling.
In addition, we observe strain induced modulations in the magnetic and electrical transport properties of the Fe3O4 thin film across the thermally driven intrinsic ferroelectric and structural phase transitions of the BaTiO3 substrate.
In situ electric field dependent Raman measurements reveal that the electric field does not significantly modify the antiphase boundary defects in the Fe3O4 thin film once it is thermodynamically stable after deposition and that the modification of the magnetic properties is mainly caused by strain induced lattice distortions and magnetic anisotropy.
These results provide a framework to realize electrical control of the magnetization in a classical highly correlated transition metal oxide.
This work demonstrates the production of high-performing p- type and n-type hybrid AgxTe/poly(3,4-ethylenedioxythiopene):polystyrene sulfonic acid (PE-DOT:PSS) thermoelectric materials from the same Te/PEDOT:PSS parent structure during aqueous-based synthesis. All samples were solution-processed and analyzed in thin- film architectures. We were able to demonstrate a power factor of 44 mu W m(-1) K-2 for our highest-performing n-type material. In addition, we were also able to realize a 68% improvement in the power factor of our p-type compositions relative to the parent structure through manipulation of the inorganic nanostructure composition. We demonstrate control over the thermoelectric properties by varying the stoichiometry of AgxTe nanoparticles in AgxTe/PEDOT:PSS hybrid materials via a topotactic chemical transformation process at room temperature. This process offers a simple, low-temperature, and cost-effective route toward the production of both efficient n-type and p-type hybrid thermoelectric materials.
Nanostructured silicon and silicon-aluminum compounds are synthesized by a novel synthesis strategy based on spark plasma sintering (SPS) of silicon nanopowder, mesoporous silicon (pSi), and aluminum nanopowder. The interplay of metal-assisted crystallization and inherent porosity is exploited to largely suppress thermal conductivity. Morphology and temperature-dependent thermal conductivity studies allow us to elucidate the impact of porosity and nanostructure on the macroscopic heat transport. Analytic electron microscopy along with quantitative image analysis is applied to characterize the sample morphology in terms of domain size and interpore distance distributions. We demonstrate that nanostructured domains and high porosity can be maintained in densified mesoporous silicon samples. In contrast, strong grain growth is observed for sintered nanopowders under similar sintering conditions. We observe that aluminum agglomerations induce local grain growth, while aluminum diffusion is observed in porous silicon and dispersed nanoparticles. A detailed analysis of the measured thermal conductivity between 300 and 773 K allows us to distinguish the effect of reduced thermal conductivity caused by porosity from the reduction induced by phonon scattering at nanosized domains. With a modified Landauer/Lundstrom approach the relative thermal conductivity and the scattering length are extracted. The relative thermal conductivity confirms the applicability of Kirkpatrick's effective medium theory. The extracted scattering lengths are in excellent agreement with the harmonic mean of log-normal distributed domain sizes and the interpore distances combined by Matthiessen's rule.
This article presents inelastic thermal neutron scattering experiments probing the phonon dispersion in mesoporous silicon with pores 8 nm across. Scattering studies reveal the energy-momentum relation for transverse and longitudinal phonons along the high symmetry directions , and in the Brillouin zone. The dispersion up to phonon energies of 35 meV unambiguously proves that the phonon group velocities in highly-crystalline silicon are not modified by nanostructuring down to sub-10 nanometer length scales. On these length scales, there is apparently no effect of structuring on the elastic moduli of mesoporous silicon. No evidence can be found for phonon-softening in topologically complex, geometrically disordered mesoporous silicon putting it in contrast to silicon nanotubes and nanoribbons.
This article describes the energy resolution of spin-echo three-axis spectrometers (SE-TASs) by a compact matrix formalism. SE-TASs allow one to measure the line widths of elementary excitations in crystals, such as phonons and magnons, with an energy resolution in the mu eV range. The resolution matrices derived here generalize prior work: (i) the formalism works for all crystal structures; (ii) spectrometer detuning effects are included; these arise typically from inaccurate knowledge of the excitation energy and group velocity; (iii) components of the gradient vector of the dispersion surface d omega/dq perpendicular to the scattering plane are properly treated; (iv) the curvature of the dispersion surface is easily calculated in reciprocal units; (v) the formalism permits analysis of spin-echo signals resulting from multiple excitation modes within the three-axis spectrometer resolution ellipsoid.
Synthesis of organic-inorganic hybrids based on the conjugated polymer P3HT and mesoporous silicon
(2022)
Organic-inorganic hybrids are a class of functional materials that combine favorable properties of their constituents to achieve an overall improved performance for a wide range of applications. This article presents the synthesis route for P3HT-porous silicon hybrids for thermoelectric applications. The conjugated polymer P3HT is incorporated into the porous silicon matrix by means of melt infiltration. Gravimetry, sorption isotherms and energy dispersive X-ray spectroscopy (EDX) mapping indicate that the organic molecules occupy more than 50% of the void space in the inorganic host. We demonstrate that subsequent diffusion-based doping of the confined polymer in a FeCl3 solution increases the electrical conductivity of the hybrid by five orders of magnitude compared to the empty porous silicon host.
A novel design of an electrochemical anodization cell dedicated to the synthesis of mesoporous, single-crystalline silicon is presented. First and foremost, the design principle follows user safety since electrochemical etching of silicon requires highly hazardous electrolytes based on hydrofluoric (HF) acid. The novel cell design allows for safe electrolyte handling prior, during, and post-etching. A peristaltic pump with HF-resistant fluoroelastomer tubing transfers electrolytes between dedicated reservoirs and the anodization cell. Due to the flexibility of the cell operation, different processing conditions can be realized providing a large parameter range for the attainable sample thickness, its porosity, and the mean pore size. Rapid etching on the order of several minutes to synthesize micrometer-thick porous silicon epilayers on bulk silicon is possible as well as long-time etching with continuous, controlled electrolyte flow for several days to prepare up to 1000 mu m thick self-supporting porous silicon membranes. A highly adaptable, LabVIEW((TM))-based control software allows for user-defined etching profiles.
Numerous phosphorus-rich metal phosphides containing both P-P bonds and metal-P bonds are known from the solid-state chemistry literature. A method to grow these materials in thin-film form would be desirable, as thin films are required in many applications and they are an ideal platform for high-throughput studies. In addition, the high density and smooth surfaces achievable in thin films are a significant advantage for characterization of transport and optical properties. Despite these benefits, there is hardly any published work on even the simplest binary phosphorus-rich phosphide films. Here, we demonstrate growth of single-phase CuP2 films by a two-step process involving reactive sputtering of amorphous CuP2+x and rapid annealing in an inert atmosphere. At the crystallization temperature, CuP2 is thermodynamically unstable with respect to Cu3P and P-4. However, CuP2 can be stabilized if the amorphous precursors are mixed on the atomic scale and are sufficiently close to the desired composition (neither too P poor nor too P rich). Fast formation of polycrystalline CuP2, combined with a short annealing time, makes it possible to bypass the diffusion processes responsible for decomposition. We find that thin-film CuP2 is a 1.5 eV band gap semiconductor with interesting properties, such as a high optical absorption coefficient (above 10(5) cm(-1)), low thermal conductivity (1.1 W/(K m)), and composition-insensitive electrical conductivity (around 1 S/cm). We anticipate that our processing route can be extended to other phosphorus-rich phosphides that are still awaiting thin-film synthesis and will lead to a more complete understanding of these materials and of their potential applications.
CuI has been recently rediscovered as a p-type transparent conductor with a high figure of merit. Even though many metal iodides are hygroscopic, the effect of moisture on the electrical properties of CuI has not been clarified. In this work, we observe a 2-fold increase in the conductivity of CuI after exposure to ambient humidity for 5 h, followed by slight long-term degradation. Simultaneously, the work function of CuI decreases by almost 1 eV, which can explain the large spread in the previously reported work function values. The conductivity increase is partially reversible and is maximized at intermediate humidity levels. On the basis of the large intragrain mobility measured by THz spectroscopy, we suggest that hydration of grain boundaries may be beneficial for the overall hole mobility.