Refine
Has Fulltext
- no (38)
Year of publication
Document Type
- Article (38) (remove)
Is part of the Bibliography
- yes (38)
Keywords
- Maltose-modified poly(ethyleneimine) (2)
- Ring tensiometry (2)
- gold nanoparticles (2)
- microemulsion (2)
- mu-DSC (2)
- polyelectrolyte (2)
- Bentonite clay (1)
- Biomineralization (1)
- Bone repair material (1)
- Calcium phosphates (1)
Institute
Polyplexes between a double-stranded Salmon DNA and hyperbranched poly(ethyleneimine) (PEI) as well as a maltosylated PEI-Mal were incorporated into a gelatin/chitosan hydrogel scaffold. Calorimetric experiments of the polyplexes show a decrease of the melting temperature in presence of PEI and a peak splitting in presence of PEI-Mal, which can be interpreted to a partial compaction of the DNA strands in presence of PEI-Mal. When the polyplexes are incorporated into a gelatin/chitosan scaffold in the swollen state, the DNA melting peaks at 90 and 93 degrees C, respectively, indicate in both cases the release of the DNA at the surface of the hydrogel scaffold in a more compact form. Specific interactions between the PEI-Mal shell and gelatin are responsible for the tuning of the release properties in presence of the maltose units in the hyperbranched PEI.
Pickering emulsions with two types of nanoparticles, i.e., superparamagnetic magnetite nanoparticles dispersed in n-hexane and gold nanoparticles dispersed in water, were formed by rigorous mixing in presence of surface active polymeric surfactants. Monodisperse magnetite nanoparticles with a mean particle size of 4 nm were obtained by a microwave-assisted synthesis in n-hexane in presence of oleic acid, and gold nanoparticles were produced in aqueous solution in presence of the hyperbranched poly(ethyleneimine) (PEI) or sodium citrate as reducing and stabilizing agent. After mixing the prepared nanoparticle dispersions in presence of the Pluronics an intermediate gel-like phase is formed. The Pickering emulsion droplets in the intermediate phase are stabilized by both types of nanoparticles, as to be seen by cryo-SEM micrographs. After separating, solvent evaporation and redispersion in water highly ordered Pluronic-stabilized superparamagnetic magnetite nanoparticle aggregates with embedded gold nanoparticles can be obtained.
The influence of branched poly(ethyleneimine) on the phase behavior of the system sodium dodecylsulfate/toluene-pentanol (1:1)/water has been studied. The isotropic microemulsions still exist when water is replaced with aqueous solutions of PEI (up to 30% in weight), but their stability is significantly influenced. From a polymer concentration of 20 wt%, the polymer enhances the solubilization of water in oil, changes the sign of the spontaneous curvature of the surfactant film, and induces an inversion of the microemulsion type from water-in-oil (L-2) to oil-in-water (L-1), by the formation of a bicontinuous channel. Further investigations show that the addition of polymer in the L-2 phase changes the droplet-droplet interactions as the conductivity drops and the percolation disappears. In the bicontinuous channel, higher viscosities can be detected, as well as a weak percolation followed by a steep increase of the conductivity, which can be related to evident structural changes in the system. DSC measurements allow then to follow the changes of the water properties in the system, from interfacial-water in the L-2 phase to free-water in the sponge-like phase. Finally, all the measurements performed permit to characterize the structural transitions in the system and to understand the role of the added polymer.
This paper is focused on the use of branched poly(ethyleneimine) (PEI) as reducing as well as stabilizing agent for the formation of gold nanoparticles in different media. The process of nanoparticle formation was investigated, in the absence of any other reducing agents, in microemulsion template phase in comparison to the nucleation process in aqueous polymer solution. On the one hand, it was shown that the polyelectrolyte can be used for the controlled single-step synthesis and stabilization of gold nanoparticles via a nucleation reaction and particles with an average diameter of 7.1 nm can be produced. On the other hand, it was demonstrated that the polymer can also act as reducing and stabilizing agent in much more complex systems, i.e. in water-in-oil (w/o) microemulsion droplets. The reverse microemulsion droplets of the quaternary system sodium dodecylsulfate (SDS)/toluene-pentanol (1:1)/water were successfully used for the synthesis of gold nanoparticles. The polymer, incorporated in the droplets, exhibits reducing properties, adsorbs on the surface of the nanoparticles and prevents their aggregation. Consequently, nanoparticles of 8.6 nm can be redispersed after solvent evaporation without a change of their size. Nevertheless, the polymer acts already as a "template" during the formation of the nanoparticles in water and in microemulsion, so that an additional template effect of the microemulsion is not observed. The particle formation for both methods is checked by means of UV-vis spectroscopy and the particle size and size distribution are investigated via dynamic light scattering and transmission electron microscopy (TEM). (c) 2006 Elsevier B.V. All rights reserved.
Polyplexes, composed of Salmon DNA and very small gold nanoparticles embedded into a dendritic glycopolymer architecture of sugar-modified poly(ethyleneimine) (PEI-Mal) with a molar mass of about 25,000 g/mol, were characterized by dynamic light scattering (DLS), zeta potential measurements, micro differential scanning calorimetry (mu-DSC) and transmission electron microscopy (TEM). The PEI-Mal-entrapped gold nanoparticles of about 2 nm in diameter influence the polyplex formation of the hyperbranched PEI containing bulky maltose, and in consequence the DNA is more compactized in the inner part of spherical polyplex particles of about 150 nm in diameter. The resulting more compact core shell polyplex particles with embedded gold nanoparticles in the outer polymer shell will be used as components in forthcoming gene delivery experiments. (C) 2017 Elsevier B.V. All rights reserved.
Janus emulsions, containing olive oil (OO) and silicone oil (SiO), were formed in presence of polyelectrolyte complex particles, i.e., gelatin-sodium polyacrylate (NaPAA) complexes. The diameter of completely engulfed Janus droplets can be tuned between 50 and 200 mu m by varying the gelatin/NaPAA complex particle size between 200 and 400 nm. The gelatin/NaPAA complex particles adsorbed at the olive oil interface decrease the interfacial tension and stabilize the resulting completely engulfed Pickering Janus emulsions. Long-term stable Janus gels can be synthesized in presence of gelatin/sodium carboxymethylcellulose (NaCMC) mixtures. In that case Coulombic forces are of relevance with regard to the stabilization of the Janus droplets embedded in a gelatin/NaCMC gel matrix. Janus gels show elastic reological behavior and thixotropic properties.
Polyplexes between Salmon DNA and non-modified hyperbranched poly(ethyleneimines) of varying molar mass, i.e., PEI(5 k) with 5000 g/mol and PEI(25 k) with 25,000 g/mol, and modified PEI(5 k) with maltose units (PEI-Mal) were investigated in dependence on the molar N/P ratio by using dynamic light scattering (DLS), zeta potential measurements, micro differential scanning calorimetry (mu-DSC), scanning-transmission electron microscopy (STEM), and cryo-scanning electron microscopy (cryo-SEM). A reloading of the polyplexes can be observed by adding the unmodified PEI samples of different molar mass. In excess of PEI a morphological transition from core-shell particles (at N/P 8) to loosely packed onion-like polyplexes (at N/P 40) is observed. The shift of the DSC melting peak from 88 degrees C to 76 degrees C indicates a destabilization of the DNA double helix due to the complexation with the unmodified PEI. Experiments with the maltose-modified PEI show a reloading already at a lower N/P ratio. Due to the presence of the sugar units in the periphery of the polycation electrostatic interactions between DNA become weaker, but cooperative H-bonding forces are reinforced. The resulting less-toxic, more compact polyplexes in excess of the PEI-Mal with two melting points and well distributed DNA segments are of special interest for extended gene delivery experiments. (C) 2015 Elsevier B.V. All rights reserved.
Chemically cross-linked composite gels based on bentonite clay from Manyrak deposit (Kazakhstan Republic) and nonionic polymers, i.e., poly(hydroxyethylacrylate) and poly(acrylamide), were polymerized in situ after preliminary intercalation of monomers in an aqueous suspension of bentonite clay. By means of cryo-scanning electron microscopy, it was shown that bentonite clay is well incorporated into the gel network structure with pore sizes up to 1.5 mu m. The intercalated bentonite clay can adsorb cationic surfactants as well as heavy metal ions due to electrostatic interactions. Conductometric and surface tension measurements indicate not only the adsorption of surfactants and heavy metals inside the hydrogel, but also the displacement of the critical micellization concentration (CMC) of the surfactants.
By dropping a NaH2PO4 center dot H2O precursor solution to a CaCl2 solution at 90 degrees C under continuous stirring in presence of two biopolymers, i.e. gelatin (G) and chitosan (C), supramolecular calcium phosphate (CP) card house structures are formed. Light microscopic investigations in combination with scanning electron microscopy show that the GC-based flower-like structure is constructed from very thin CP platelets. Titration experiments indicate that H-bonding between both biopolymers is responsible for the synergistic effect in presence of both polymers. Gelatin chitosan water complexes play an important role with regard to supramolecular ordering. FTIR spectra in combination with powder X-ray diffraction show that after burning off all organic components (heating up >600 degrees C) dicalcium and tricalcium phosphate crystallites are formed. From high resolution transmission electron microscopy (HR-TEM) it is obvious to conclude, that individual crystal platelets are dicalcium phosphates, which build up ball-like supramolecular structures. The results reveal that the GC guided crystal growth leads to nano-porous supramolecular structures, potentially attractive candidates for bone repair. (c) 2015 Elsevier B.V. All rights reserved.
This Letter is focused on the one-pot formation of CdS nanoparticles in aqueous medium in presence of polyethyleneimine (PEI). Quantum dots can be obtained by adding a pre-cooled aqueous Na2S solution to a pre-cooled aqueous CdCl2 solution dropwise in presence of PEI.
Field flow fractionation in combination with TEM experiments show a time dependent agglomeration of individual quantum dots from 1.6 nm up to 3.2 nm in size. The hyperbranched PEI of moderate molar mass (>20000 g/mol) is an excellent polymer to prevent a further increase of the particle size. Therefore, stable fluorescent PEI-capped CdS quantum dots are available.
This paper focuses on two different strategies to incorporate gold nanoparticles (AuNPs) into the matrix of polyacrylamide (PAAm) hydrogels. Poly(ethyleneimine) (PEI) is used as both reducing and stabilizing agent for the formation of AuNPs. In addition, the influence of an ionic liquid (IL) (i.e., 1-ethyl-3-methylimidazolium ethylsulfate) on the stability of the nanoparticles and their immobilization in the hydrogel is investigated The results show that AuNPs surrounded by a shell containing PEI and IL, synthesized according to the one-pot approach, are much better immobilized within the PAAm hydrogel. Hereby, the IL is responsible for structural changes in the hydrogel as well as the improved stabilization and embedding of the AuNPs into the polymer gel matrix.
The paper is focused on the characterization and use of phosphatidylcholine (PC)-based inverse microemulsions as a template phase for the CdS nanoparticle formation. The optically clear, isotropic phase in the oil corner was identified as a "classicalö water-in-oil microemulsion by means of NMR-diffusion measurements. Because of the very small dimensions of the water droplets, the isotropic phase shows a Newtonian-like flow behavior, and adequate amounts of bulk water cannot be detected by DSC. It is demonstrated that this w/o microemulsion can be used successfully as a nanoreactor for the formation of CdS nanoparticles with diameters of 4-5 nm. During the following process of solvent evaporation the individual small CdS nanoparticles aggregate to significant larger cubic nanoparticles, with an edge length of 2-40 nm, arranged in well-defined mosaic-like superstructures. In presence of SDS the nanocubes were stable up to 800 °C. It has to be stated here that polyelectrolytes prevent the formation of such well-ordered superstructures.
Aqueous solutions of sodium dodecylsulfate (SDS) and poly(N,N'-diallyl-N,N'-dimethyl-alt-maleamic carboxylate) (PalH), a synthetic pH-tuneable polyelectrolyte (PEL), have been investigated by various techniques at different pH-values in absence and presence of NaCl. Potentiometric measurements using a surfactant-selective electrode indicate a quite complex interaction mechanism, which can be subdivided into different regions, where non-cooperative, electrostatic and cooperative hydrophobic interactions are of relevance. It was concluded, that in dependence on pH, conformational changes are responsible for the different interaction behavior in the NaCl-free system. Isothermal titration calorimetry (ITC) suggests that early stage hydrophobic binding is an exothermic process followed by electrostatic interactions, which are endothermic in nature and entropy driven. After NaCl addition the interaction mechanism becomes independent of pH due to a screening of (i) attractive interactions between the surfactant head groups and oppositely charged binding sites and (ii) repulsive forces between the surfactant head groups. Furthermore, the ITC investigations have revealed that after salt-addition surfactant micelles interact with the polymer instead of separated SDS molecules due to a depression of the CMC.
This work is focused on the influence of an ionic liquid (IL), i.e. ethyl-methylimidazolium hexylsulfate, on the spontaneous formation of microemulsions with ionic surfactants. The influence of the ionic liquid on Structure formation in the optically clear phase region in water/toluene/pentanol mixtures in presence of the cationic surfactant CTAB was studied in more detail. The results show a significant increase of the transparent phase region by adding the ionic liquid. Conductometric investigations demonstrate that adding the ionic liquid can drastically reduce the droplet- droplet interactions in the L-2 phase. H-1 nuclear magnetic resonance (H-1 NMR) diffusion coefficient measurements in combination with dynamic light scattering measurements clearly show that inverse microemulsion droplets still exist, but the droplet size is decreased to 2 nm. A more detailed characterisation of the isotropic phase channel by means of conductivity measurements, dynamic light scattering (DLS), H-1 NMR and cryo-scanning electron microscopy (SEM), allows the identification of a bicontinuous sponge phase between the L-1 and L-2 phase. When the poly(ethyleneimine) is added, the isotropic phase range is reduced drastically, but the inverse microemulsion range still exists.
Polymer-modified bicontinuous microemulsions used as a template for the formation of nanorods
(2009)
This article is focused on the characterization of the poly(ethylene glycol) (PEG)-induced bicontinuous microemulsion of the pseudo-ternary system sodium dodecylsulfate (SDS)/xylene-pentanol/water by means of differential scanning calorimetry, rheology, and conductometry. The influence of the polymer concentration (cp) and the molecular weight (Mw) on the microstructure of the microemulsion was investigated using Cryo scanning electron microscopy. It was found that an increase of cp influences the structure of the sponge-like phase significantly. These polymer-modified microemulsions can be used as a template phase for the formation of BaSO4 nanorods, where individual nanoparticles (5nm in size) are ordered along the polymer backbone.
The influence of polyelectrolytes on structure formation in liquid crystalline Na-dodecylsulfate/decanol/water systems was investigated by means of small angle X-ray diffraction, rheology, NMR spectroscopy, and microscopy. By adding Na-polyacrylate (PAA) into the mesophase, the one-phase region is left and phenomena of phase separation into a solvent-rich and a polymer/surfactantrich phase occurs. By incoporating an anionic and cationic polyelectrolyte step by step the tendency of phase separation is increased drastically. The self-organization process can be regulated directly by varying the water content of the system. However, at a water content of 30% the properties of the resulting liquid crystal were changed drastically. X-ray diffraction shows a multitude of Bragg peaks, NMR shows a peak-splitting, and rheology shows a change from non-Newtonian to Newtonian-flow behavior. On the basis of the experimental results an ordered multilayer associate structure can be assumed.
The paper is focused on the formation and redispersion of monodisperse BaSO4 nanoparticles in polyelectrolyte- modified microemulsions. It is shown that a cationic polyelectrolyte of low molar mass, e.g. poly(dially1dimethylammonium chloride) (PDADMAC), can be incorporated into the individual inverse microemulsion droplets (L2 phase) consisting of heptanol, water, and an amphoteric surfactant with a sulfobetaine head group. These PDADMAC- filled microemulsion droplets can be successfully used as a template phase for the nanoparticle formation. The monodisperse BaSO4 nanoparticles are produced by a simple mixing procedure and can be redispersed after solvent evaporation without a change in particle dimensions. Dynamic and electrophoretical light scattering in combination with sedimentation experiments in the analytical Ultracentrifuge of the redispersed powder show polyelectrolyte-stabilized nanoparticles with diameters of about 6 nm. The polyelectrolyte shows a "size control effect", which can be explained by the polyelectrolyte-surfactant interactions in relation to the polyelectrolyte-nanoparticle interactions during the particle growth, solvent evaporation and redispersion process. However, the approach used here opens away to produce different types of polyelectrolyte-stabilized nanoparticles (including rare metals, semiconductors, carbonates or oxides) of very small dimensions. (C) 2004 Elsevier B.V. All rights reserved
This paper is focused on the synthesis and characterization of hydrophobically modified polyelectrolytes and their use as reducing as well as stabilizing agents for the formation of gold nanoparticles. Commercially available poly(acrylic acid) has been hydrophobically modified with various degrees of grafting of butylamine introduced randomly along the chain. Different analytical methods are performed, i.e., IR and H-1-NMR spectroscopy in combination with elemental analysis to determine the degree of grafting. The modified polymers can successfully be used for the controlled single-step synthesis and stabilization of gold nanoparticles. The process of nanoparticle formation is investigated by means of UV-vis spectroscopy. The size and shape of the particles obtained in the presence of unmodified or modified polyelectrolytes are characterized by dynamic light scattering, zeta potential measurements and transmission electron microscopy. The polyelectrolytes were involved in the crystallization process of the nanoparticles, and in the presence of hydrophobic microdomains at the particle surface, a better stabilization at higher temperature can be observed
The influence of the water soluble polymer poly(ethylene glycol) (PEG) on structure formation in the quasiternary system sodium dodecylsulfate (SDS)/pentanol-xylene/water was checked by means of conductometry, rheology, and micro differential calorimetry. The polymer induces the formation of an isotropic phase channel between the o/w and w/o microemulsion. The transition from the normal as well as from the inverse micellar to the bicontinuous phase range can be detected by conductometry, rheology as well as micro-DSC. As a result of polymer-surfactant interactions, the spontaneous curvature of the surfactant film is changed and a sponge phase is formed. The bicontinuous phase is characterized by a moderate shear viscosity, a Newtonian flow behaviour, and the disappearence of interphasal water in the heating curve of the micro-DSC. When the polymer-modified bicontinuous phase is used as a template phase for the nanoparticle formation, spherical BaSO4 nanoparticles were formed. During the following solvent evaporation process the primarily formed spherical nanoparticles aggregate to nanorods and triangular structures due to the non-restriction of the bicontinuous template phase in longitudinal direction