Refine
Has Fulltext
- no (4)
Year of publication
- 2021 (4) (remove)
Document Type
- Article (4)
Language
- English (4)
Is part of the Bibliography
- yes (4) (remove)
Keywords
- PHREEQC (2)
- Granite (1)
- Mechanical properties (1)
- Micro-structure (1)
- Pitzer (1)
- Thermal treatment (1)
- Unloading (1)
- carnallite (1)
- cementation (1)
- convection (1)
Institute
Diagenetic trends of synthetic reservoir sandstone properties assessed by digital rock physics
(2021)
Quantifying interactions and dependencies among geometric, hydraulic and mechanical properties of reservoir sandstones is of particular importance for the exploration and utilisation of the geological subsurface and can be assessed by synthetic sandstones comprising the microstructural complexity of natural rocks. In the present study, three highly resolved samples of the Fontainebleau, Berea and Bentheim sandstones are generated by means of a process-based approach, which combines the gravity-driven deposition of irregularly shaped grains and their diagenetic cementation by three different schemes. The resulting evolution in porosity, permeability and rock stiffness is examined and compared to the respective micro-computer tomographic (micro-CT) scans. The grain contact-preferential scheme implies a progressive clogging of small throats and consequently produces considerably less connected and stiffer samples than the two other schemes. By contrast, uniform quartz overgrowth continuously alters the pore space and leads to the lowest elastic properties. The proposed stress-dependent cementation scheme combines both approaches of contact-cement and quartz overgrowth, resulting in granulometric, hydraulic and elastic properties equivalent to those of the respective micro-CT scans, where bulk moduli slightly deviate by 0.8%, 4.9% and 2.5% for the Fontainebleau, Berea and Bentheim sandstone, respectively. The synthetic samples can be further altered to examine the impact of mineral dissolution or precipitation as well as fracturing on various petrophysical correlations, which is of particular relevance for numerous aspects of a sustainable subsurface utilisation.
How insoluble inclusions and intersecting layers affect the leaching process within potash seams
(2021)
Potash seams are a valuable resource containing several economically interesting, but also highly soluble minerals. In the presence of water, uncontrolled leaching can occur, endangering subsurface mining operations. In the present study, the influence of insoluble inclusions and intersecting layers on leaching zone evolution was examined by means of a reactive transport model. For that purpose, a scenario analysis was carried out, considering different rock distributions within a carnallite-bearing potash seam. The results show that reaction-dominated systems are not affected by heterogeneities at all, whereas transport-dominated systems exhibit a faster advance in homogeneous rock compositions. In return, the ratio of permeated rock in vertical direction is higher in heterogeneous systems. Literature data indicate that most natural potash systems are transport-dominated. Accordingly, insoluble inclusions and intersecting layers can usually be seen as beneficial with regard to reducing hazard potential as long as the mechanical stability of leaching zones is maintained. Thereby, the distribution of insoluble areas is of minor impact unless an inclined, intersecting layer occurs that accelerates leaching zone growth in one direction. Moreover, it is found that the saturation dependency of dissolution rates increases the growth rate in the long term, and therefore must be considered in risk assessments.
Leaching zones within potash seams generally represent a significant risk to subsurface mining operations and the construction of technical caverns in salt rocks, but their temporal and spatial formation has been investigated only rudimentarily to date. To the knowledge of the authors, current reactive transport simulation implementations are not capable to address hydraulic-chemical interactions within potash salt. For this reason, a reactive transport model has been developed and complemented by an innovative approach to calculate the interchange of minerals and solution at the water-rock interface. Using this model, a scenario analysis was carried out based on a carnallite-bearing potash seam. The results show that the evolution of leaching zones depends on the mineral composition and dissolution rate of the original salt rock, and that the formation can be classified by the dimensionless parameters of Peclet (Pe) and Damkohler (Da). For Pe > 2 and Da > 1, a funnel-shaped leaching zone is formed, otherwise the dissolution front is planar. Additionally, Da > 1 results in the formation of a sylvinitic zone and a flow barrier. Most scenarios represent hybrid forms of these cases. The simulated shapes and mineralogies are confirmed by literature data and can be used to assess the hazard potential.
Mechanical behaviors of granite after thermal treatment under loading and unloading conditions
(2021)
Understanding the mechanical behaviors of granite after thermal treatment under loading and unloading conditions is of utmost relevance to deep geothermal energy recovery. In the present study, a series of loading and unloading triaxial compression tests (20, 40 and 60 MPa) on granite specimens after exposure to different temperatures (20, 200, 300, 400, 500 and 600 degrees C) was carried out to quantify the combined effects of thermal treatment and loading/unloading stress conditions on granite strength and deformation. Changes in the microstructure of granite exposed to high temperatures were revealed by optical microscopy. The experimental results indicate that both, thermal treatment and loading/unloading stress conditions, degrade the mechanical behaviors and further decrease the carrying capacity of granite. The gradual degradation of the mechanical characteristics of granite after thermal treatment is mainly associated with the evolution of thermal micro-cracks based on optical microscopy observations. The unloading stress state induces the extension of tension cracks parallel to the axial direction, and thus, the mechanical properties are degraded. Temperatures above 400 degrees C have a more significant influence on the mechanical characteristics of granite than the unloading treatment, whereby 400 degrees C can be treated as a threshold temperature for the delineation of significant deterioration. This study is expected to support feasibility and risk assessments by means of providing data for analytical calculations and numerical simulations on granite exposed to high temperatures during geothermal energy extraction.