Refine
Year of publication
Document Type
- Doctoral Thesis (51) (remove)
Language
- English (51) (remove)
Is part of the Bibliography
- no (51) (remove)
Keywords
- Klimawandel (2)
- Kontext (2)
- Transkriptionsfaktoren (2)
- climate change (2)
- metabolism (2)
- sensor (2)
- transcription factors (2)
- ATP (1)
- Adana Basin (1)
- Adana Becken (1)
Institute
- Institut für Biochemie und Biologie (12)
- Hasso-Plattner-Institut für Digital Engineering gGmbH (7)
- Institut für Physik und Astronomie (7)
- Institut für Chemie (5)
- Institut für Umweltwissenschaften und Geographie (5)
- Extern (4)
- Institut für Geowissenschaften (4)
- Department Psychologie (3)
- Institut für Informatik und Computational Science (3)
- Department Linguistik (2)
Today, it is well known that galaxies like the Milky Way consist not only of stars but also of gas and dust. The galactic halo, a sphere of gas that surrounds the stellar disk of a galaxy, is especially interesting. It provides a wealth of information about in and outflowing gaseous material towards and away from galaxies and their hierarchical evolution. For the Milky Way, the so-called high-velocity clouds (HVCs), fast moving neutral gas complexes in the halo that can be traced by absorption-line measurements, are believed to play a crucial role in the overall matter cycle in our Galaxy. Over the last decades, the properties of these halo structures and their connection to the local circumgalactic and intergalactic medium (CGM and IGM, respectively) have been investigated in great detail by many different groups. So far it remains unclear, however, to what extent the results of these studies can be transferred to other galaxies in the local Universe. In this thesis, we study the absorption properties of Galactic HVCs and compare the HVC absorption characteristics with those of intervening QSO absorption-line systems at low redshift. The goal of this project is to improve our understanding of the spatial extent and physical conditions of gaseous galaxy halos in the local Universe. In the first part of the thesis we use HST /STIS ultraviolet spectra of more than 40 extragalactic background sources to statistically analyze the absorption properties of the HVCs in the Galactic halo. We determine fundamental absorption line parameters including covering fractions of different weakly/intermediately/highly ionized metals with a particular focus on SiII and MgII. Due to the similarity in the ionization properties of SiII and MgII, we are able to estimate the contribution of HVC-like halo structures to the cross section of intervening strong MgII absorbers at z = 0. Our study implies that only the most massive HVCs would be regarded as strong MgII absorbers, if the Milky Way halo would be seen as a QSO absorption line system from an exterior vantage point. Combining the observed absorption-cross section of Galactic HVCs with the well-known number density of intervening strong MgII absorbers at z = 0, we conclude that the contribution of infalling gas clouds (i.e., HVC analogs) in the halos of Milky Way-type galaxies to the cross section of strong MgII absorbers is 34%. This result indicates that only about one third of the strong MgII absorption can be associated with HVC analogs around other galaxies, while the majority of the strong MgII systems possibly is related to galaxy outflows and winds. The second part of this thesis focuses on the properties of intervening metal absorbers at low redshift. The analysis of the frequency and physical conditions of intervening metal systems in QSO spectra and their relation to nearby galaxies offers new insights into the typical conditions of gaseous galaxy halos. One major aspect in our study was to regard intervening metal systems as possible HVC analogs. We perform a detailed analysis of absorption line properties and line statistics for 57 metal absorbers along 78 QSO sightlines using newly-obtained ultraviolet spectra obtained with HST /COS. We find clear evidence for bimodal distribution in the HI column density in the absorbers, a trend that we interpret as sign for two different classes of absorption systems (with HVC analogs at the high-column density end). With the help of the strong transitions of SiII λ1260, SiIII λ1206, and CIII λ977 we have set up Cloudy photoionization models to estimate the local ionization conditions, gas densities, and metallicities. We find that the intervening absorption systems studied by us have, on average, similar physical conditions as Galactic HVC absorbers, providing evidence that many of them represent HVC analogs in the vicinity of other galaxies. We therefore determine typical halo sizes for SiII, SiIII, and CIII for L = 0.01L∗ and L = 0.05L∗ galaxies. Based on the covering fractions of the different ions in the Galactic halo, we find that, for example, the typical halo size for SiIII is ∼ 160 kpc for L = 0.05L∗ galaxies. We test the plausibility of this result by searching for known galaxies close to the QSO sightlines and at similar redshifts as the absorbers. We find that more than 34% of the measured SiIII absorbers have galaxies associated with them, with the majority of the absorbers indeed being at impact parameters ρ ≤160 kpc.
The importance of cryptic diversity in rotifers is well understood regarding its ecological consequences, but there remains an in depth comprehension of the underlying molecular mechanisms and forces driving speciation. Temperature has been found several times to affect species spatio-temporal distribution and organisms’ performance, but we lack information on the mechanisms that provide thermal tolerance to rotifers. High cryptic diversity was found recently in the freshwater rotifer “Brachionus calyciflorus”, showing that the complex comprises at least four species: B. calyciflorus sensu stricto (s.s.), B. fernandoi, B. dorcas, and B. elevatus. The temporal succession among species which have been observed in sympatry led to the idea that temperature might play a crucial role in species differentiation.
The central aim of this study was to unravel differences in thermal tolerance between species of the former B. calyciflorus species complex by comparing phenotypic and gene expression responses. More specifically, I used the critical maximum temperature as a proxy for inter-species differences in heat-tolerance; this was modeled as a bi-dimensional phenotypic trait taking into consideration the intention and the duration of heat stress. Significant differences on heat-tolerance between species were detected, with B. calyciflorus s.s. being able to tolerate higher temperatures than B. fernandoi.
Based on evidence of within species neutral genetic variation, I further examined adaptive genetic variability within two different mtDNA lineages of the heat tolerant B. calyciflorus s.s. to identify SNPs and genes under selection that might reflect their adaptive history. These analyses did not reveal adaptive genetic variation related to heat, however, they show putatively adaptive genetic variation which may reflect local adaptation. Functional enrichment of putatively positively selected genes revealed signals of adaptation in genes related to “lipid metabolism”, “xenobiotics biodegradation and metabolism” and “sensory system”, comprising candidate genes which can be utilized in studies on local adaptation. An absence of genetically-based differences in thermal adaptation between the two mtDNA lineages, together with our knowledge that B. calyciflorus s.s. can withstand a broad range of temperatures, led to the idea to further investigate shared transcriptomic responses to long-term exposure to high and low temperatures regimes. With this, I identified candidate genes that are involved in the response to temperature imposed stress. Lastly, I used comparative transcriptomics to examine responses to imposed heat-stress in heat-tolerant and heat-sensitive Brachionus species. I found considerably different patterns of gene expression in the two species. Most striking are patterns of expression regarding the heat shock proteins (hsps) between the two species. In the heat-tolerant, B. calyciflorus s.s., significant up-regulation of hsps at low temperatures was indicative of a stress response at the cooler end of the temperature regimes tested here. In contrast, in the heat-sensitive B. fernandoi, hsps generally exhibited up-regulation of these genes along with rising temperatures. Overall, identification of differences in expression of genes suggests suppression of protein biosynthesis to be a mechanism to increase thermal tolerance. Observed patterns in population growth are correlated with the hsp gene expression differences, indicating that this physiological stress response is indeed related to phenotypic life history performance.
When azobenzene-modified photosensitive polymer films are irradiated with light interference patterns, topographic variations in the film develop that follow the electric field vector distribution resulting in the formation of surface relief grating (SRG). The exact correspondence of the electric field vector orientation in interference pattern in relation to the presence of local topographic minima or maxima of SRG is in general difficult to determine. In my thesis, we have established a systematic procedure to accomplish the correlation between different interference patterns and the topography of SRG. For this, we devise a new setup combining an atomic force microscope and a two-beam interferometer (IIAFM). With this set-up, it is possible to track the topography change in-situ, while at the same time changing polarization and phase of the impinging interference pattern. To validate our results, we have compared two photosensitive materials named in short as PAZO and trimer. This is the first time that an absolute correspondence between the local distribution of electric field vectors of interference pattern and the local topography of the relief grating could be established exhaustively. In addition, using our IIAFM we found that for a certain polarization combination of two orthogonally polarized interfering beams namely SP (↕, ↔) interference pattern, the topography forms SRG with only half the period of the interference patterns. Exploiting this phenomenon we are able to fabricate surface relief structures below diffraction limit with characteristic features measuring only 140 nm, by using far field optics with a wavelength of 491 nm. We have also probed for the stresses induced during the polymer mass transport by placing an ultra-thin gold film on top (5–30 nm). During irradiation, the metal film not only deforms along with the SRG formation, but ruptures in regular and complex manner. The morphology of the cracks differs strongly depending on the electric field distribution in the interference pattern even when the magnitude and the kinetic of the strain are kept constant. This implies a complex local distribution of the opto-mechanical stress along the topography grating. The neutron reflectivity measurements of the metal/polymer interface indicate the penetration of metal layer within the polymer resulting in the formation of bonding layer that confirms the transduction of light induced stresses in the polymer layer to a metal film.
River reaches protected by dikes exhibit high damage potential due to strong value accumulation in the hinterland areas. While providing an efficient protection against low magnitude flood events, dikes may fail under the load of extreme water levels and long flood durations. Hazard and risk assessments for river reaches protected by dikes have not adequately considered the fluvial inundation processes up to now. Particularly, the processes of dike failures and their influence on the hinterland inundation and flood wave propagation lack comprehensive consideration. This study focuses on the development and application of a new modelling system which allows a comprehensive flood hazard assessment along diked river reaches under consideration of dike failures. The proposed Inundation Hazard Assessment Model (IHAM) represents a hybrid probabilistic-deterministic model. It comprises three models interactively coupled at runtime. These are: (1) 1D unsteady hydrodynamic model of river channel and floodplain flow between dikes, (2) probabilistic dike breach model which determines possible dike breach locations, breach widths and breach outflow discharges, and (3) 2D raster-based diffusion wave storage cell model of the hinterland areas behind the dikes. Due to the unsteady nature of the 1D and 2D coupled models, the dependence between hydraulic load at various locations along the reach is explicitly considered. The probabilistic dike breach model describes dike failures due to three failure mechanisms: overtopping, piping and slope instability caused by the seepage flow through the dike core (micro-instability). The 2D storage cell model driven by the breach outflow boundary conditions computes an extended spectrum of flood intensity indicators such as water depth, flow velocity, impulse, inundation duration and rate of water rise. IHAM is embedded in a Monte Carlo simulation in order to account for the natural variability of the flood generation processes reflected in the form of input hydrographs and for the randomness of dike failures given by breach locations, times and widths. The model was developed and tested on a ca. 91 km heavily diked river reach on the German part of the Elbe River between gauges Torgau and Vockerode. The reach is characterised by low slope and fairly flat extended hinterland areas. The scenario calculations for the developed synthetic input hydrographs for the main river and tributary were carried out for floods with return periods of T = 100, 200, 500, 1000 a. Based on the modelling results, probabilistic dike hazard maps could be generated that indicate the failure probability of each discretised dike section for every scenario magnitude. In the disaggregated display mode, the dike hazard maps indicate the failure probabilities for each considered breach mechanism. Besides the binary inundation patterns that indicate the probability of raster cells being inundated, IHAM generates probabilistic flood hazard maps. These maps display spatial patterns of the considered flood intensity indicators and their associated return periods. Finally, scenarios of polder deployment for the extreme floods with T = 200, 500, 1000 were simulated with IHAM. The developed IHAM simulation system represents a new scientific tool for studying fluvial inundation dynamics under extreme conditions incorporating effects of technical flood protection measures. With its major outputs in form of novel probabilistic inundation and dike hazard maps, the IHAM system has a high practical value for decision support in flood management.
For the first time the transcriptional reprogramming of distinct root cortex cells during the arbuscular mycorrhizal (AM) symbiosis was investigated by combining Laser Capture Mirodissection and Affymetrix GeneChip® Medicago genome array hybridization. The establishment of cryosections facilitated the isolation of high quality RNA in sufficient amounts from three different cortical cell types. The transcript profiles of arbuscule-containing cells (arb cells), non-arbuscule-containing cells (nac cells) of Rhizophagus irregularis inoculated Medicago truncatula roots and cortex cells of non-inoculated roots (cor) were successfully explored. The data gave new insights in the symbiosis-related cellular reorganization processes and indicated that already nac cells seem to be prepared for the upcoming fungal colonization. The mycorrhizal- and phosphate-dependent transcription of a GRAS TF family member (MtGras8) was detected in arb cells and mycorrhizal roots. MtGRAS shares a high sequence similarity to a GRAS TF suggested to be involved in the fungal colonization processes (MtRAM1). The function of MtGras8 was unraveled upon RNA interference- (RNAi-) mediated gene silencing. An AM symbiosis-dependent expression of a RNAi construct (MtPt4pro::gras8-RNAi) revealed a successful gene silencing of MtGras8 leading to a reduced arbuscule abundance and a higher proportion of deformed arbuscules in root with reduced transcript levels. Accordingly, MtGras8 might control the arbuscule development and life-time. The targeting of MtGras8 by the phosphate-dependent regulated miRNA5204* was discovered previously (Devers et al., 2011). Since miRNA5204* is known to be affected by phosphate, the posttranscriptional regulation might represent a link between phosphate signaling and arbuscule development. In this work, the posttranscriptional regulation was confirmed by mis-expression of miRNA5204* in M. truncatula roots. The miRNA-mediated gene silencing affects the MtGras8 transcript abundance only in the first two weeks of the AM symbiosis and the mis-expression lines seem to mimic the phenotype of MtGras8-RNAi lines. Additionally, MtGRAS8 seems to form heterodimers with NSP2 and RAM1, which are known to be key regulators of the fungal colonization process (Hirsch et al., 2009; Gobbato et al., 2012). These data indicate that MtGras8 and miRNA5204* are linked to the sym pathway and regulate the arbuscule development in phosphate-dependent manner.
Lakes are increasingly being recognized as an important component of the global carbon cycle, yet anthropogenic activities that alter their community structure may change the way they transport and process carbon. This research focuses on the relationship between carbon cycling and community structure of primary producers in small, shallow lakes, which are the most abundant lake type in the world, and furthermore subject to intense terrestrial-aquatic coupling due to their high perimeter:area ratio. Shifts between macrophyte and phytoplankton dominance are widespread and common in shallow lakes, with potentially large consequences to regional carbon cycling. I thus compared a lake with clear-water conditions and a submerged macrophyte community to a turbid, phytoplankton-dominated lake, describing differences in the availability, processing, and export of organic and inorganic carbon. I furthermore examined the effects of increasing terrestrial carbon inputs on internal carbon cycling processes. Pelagic diel (24-hour) oxygen curves and independent fluorometric approaches of individual primary producers together indicated that the presence of a submerged macrophyte community facilitated higher annual rates of gross primary production than could be supported in a phytoplankton-dominated lake at similar nutrient concentrations. A simple model constructed from the empirical data suggested that this difference between regime types could be common in moderately eutrophic lakes with mean depths under three to four meters, where benthic primary production is a potentially major contributor to the whole-lake primary production. It thus appears likely that a regime shift from macrophyte to phytoplankton dominance in shallow lakes would typically decrease the quantity of autochthonous organic carbon available to lake food webs. Sediment core analyses indicated that a regime shift from macrophyte to phytoplankton dominance was associated with a four-fold increase in carbon burial rates, signalling a major change in lake carbon cycling dynamics. Carbon mass balances suggested that increasing carbon burial rates were not due to an increase in primary production or allochthonous loading, but instead were due to a higher carbon burial efficiency (carbon burial / carbon deposition). This, in turn, was associated with diminished benthic mineralization rates and an increase in calcite precipitation, together resulting in lower surface carbon dioxide emissions. Finally, a period of unusually high precipitation led to rising water levels, resulting in a feedback loop linking increasing concentrations of dissolved organic carbon (DOC) to severely anoxic conditions in the phytoplankton-dominated system. High water levels and DOC concentrations diminished benthic primary production (via shading) and boosted pelagic respiration rates, diminishing the hypolimnetic oxygen supply. The resulting anoxia created redox conditions which led to a major release of nutrients, DOC, and iron from the sediments. This further transformed the lake metabolism, providing a prolonged summertime anoxia below a water depth of 1 m, and leading to the near-complete loss of fish and macroinvertebrates. Pelagic pH levels also decreased significantly, increasing surface carbon dioxide emissions by an order of magnitude compared to previous years. Altogether, this thesis adds an important body of knowledge to our understanding of the significance of the benthic zone to carbon cycling in shallow lakes. The contribution of the benthic zone towards whole-lake primary production was quantified, and was identified as an important but vulnerable site for primary production. Benthic mineralization rates were furthermore found to influence carbon burial and surface emission rates, and benthic primary productivity played an important role in determining hypolimnetic oxygen availability, thus controlling the internal sediment loading of nutrients and carbon. This thesis also uniquely demonstrates that the ecological community structure (i.e. stable regime) of a eutrophic, shallow lake can significantly influence carbon availability and processing. By changing carbon cycling pathways, regime shifts in shallow lakes may significantly alter the role of these ecosystems with respect to the global carbon cycle.
Causes for slow weathering and erosion in the steep, warm, monsoon-subjected Highlands of Sri Lanka
(2018)
In the Highlands of Sri Lanka, erosion and chemical weathering rates are among the lowest for global mountain denudation. In this tropical humid setting, highly weathered deep saprolite profiles have developed from high-grade metamorphic charnockite during spheroidal weathering of the bedrock. The spheroidal weathering produces rounded corestones and spalled rindlets at the rock-saprolite interface. I used detailed textural, mineralogical, chemical, and electron-microscopic (SEM, FIB, TEM) analyses to identify the factors limiting the rate of weathering front advance in the profile, the sequence of weathering reactions, and the underlying mechanisms. The first mineral attacked by weathering was found to be pyroxene initiated by in situ Fe oxidation, followed by in situ biotite oxidation. Bulk dissolution of the primary minerals is best described with a dissolution – re-precipitation process, as no chemical gradients towards the mineral surface and sharp structural boundaries are observed at the nm scale. Only the local oxidation in pyroxene and biotite is better described with an ion by ion process. The first secondary phases are oxides and amorphous precipitates from which secondary minerals (mainly smectite and kaolinite) form. Only for biotite direct solid state transformation to kaolinite is likely. The initial oxidation of pyroxene and biotite takes place in locally restricted areas and is relatively fast: log J = -11 molmin/(m2 s). However, calculated corestone-scale mineral oxidation rates are comparable to corestone-scale mineral dissolution rates: log R = -13 molpx/(m2 s) and log R = -15 molbt/(m2 s). The oxidation reaction results in a volume increase. Volumetric calculations suggest that this observed oxidation leads to the generation of porosity due to the formation of micro-fractures in the minerals and the bedrock allowing for fluid transport and subsequent dissolution of plagioclase. At the scale of the corestone, this fracture reaction is responsible for the larger fractures that lead to spheroidal weathering and to the formation of rindlets. Since these fractures have their origin from the initial oxidational induced volume increase, oxidation is the rate limiting parameter for weathering to take place. The ensuing plagioclase weathering leads to formation of high secondary porosity in the corestone over a distance of only a few cm and eventually to the final disaggregation of bedrock to saprolite. As oxidation is the first weathering reaction, the supply of O2 is a rate-limiting factor for chemical weathering. Hence, the supply of O2 and its consumption at depth connects processes at the weathering front with erosion at the surface in a feedback mechanism. The strength of the feedback depends on the relative weight of advective versus diffusive transport of O2 through the weathering profile. The feedback will be stronger with dominating diffusive transport. The low weathering rate ultimately depends on the transport of O2 through the whole regolith, and on lithological factors such as low bedrock porosity and the amount of Fe-bearing primary minerals. In this regard the low-porosity charnockite with its low content of Fe(II) bearing minerals impedes fast weathering reactions. Fresh weatherable surfaces are a pre-requisite for chemical weathering. However, in the case of the charnockite found in the Sri Lankan Highlands, the only process that generates these surfaces is the fracturing induced by oxidation. Tectonic quiescence in this region and low pre-anthropogenic erosion rate (attributed to a dense vegetation cover) minimize the rejuvenation of the thick and cohesive regolith column, and lowers weathering through the feedback with erosion.
Cellulose is the most abundant biopolymer on earth. In this work it has been used, in various forms ranging from wood to fully processed laboratory grade microcrystalline cellulose, to synthesise a variety of metal and metal carbide nanoparticles and to establish structuring and patterning methodologies that produce highly functional nano-hybrids. To achieve this, the mechanisms governing the catalytic processes that bring about graphitised carbons in the presence of iron have been investigated. It was found that, when infusing cellulose with an aqueous iron salt solution and heating this mixture under inert atmosphere to 640 °C and above, a liquid eutectic mixture of iron and carbon with an atom ratio of approximately 1:1 forms. The eutectic droplets were monitored with in-situ TEM at the reaction temperature where they could be seen dissolving amorphous carbon and leaving behind a trail of graphitised carbon sheets and subsequently iron carbide nanoparticles. These transformations turned ordinary cellulose into a conductive and porous matrix that is well suited for catalytic applications. Despite these significant changes on the nanometre scale the shape of the matrix as a whole was retained with remarkable precision. This was exemplified by folding a sheet of cellulose paper into origami cranes and converting them via the temperature treatment in to magnetic facsimiles of those cranes. The study showed that the catalytic mechanisms derived from controlled systems and described in the literature can be transferred to synthetic concepts beyond the lab without loss of generality. Once the processes determining the transformation of cellulose into functional materials were understood, the concept could be extended to other metals and metal-combinations. Firstly, the procedure was utilised to produce different ternary iron carbides in the form of MxFeyC (M = W, Mn). None of those ternary carbides have thus far been produced in a nanoparticle form. The next part of this work encompassed combinations of iron with cobalt, nickel, palladium and copper. All of those metals were also probed alone in combination with cellulose. This produced elemental metal and metal alloy particles of low polydispersity and high stability. Both features are something that is typically not associated with high temperature syntheses and enables to connect the good size control with a scalable process. Each of the probed reactions resulted in phase pure, single crystalline, stable materials. After showing that cellulose is a good stabilising and separating agent for all the investigated types of nanoparticles, the focus of the work at hand is shifted towards probing the limits of the structuring and pattering capabilities of cellulose. Moreover possible post-processing techniques to further broaden the applicability of the materials are evaluated. This showed that, by choosing an appropriate paper, products ranging from stiff, self-sustaining monoliths to ultra-thin and very flexible cloths can be obtained after high temperature treatment. Furthermore cellulose has been demonstrated to be a very good substrate for many structuring and patterning techniques from origami folding to ink-jet printing. The thereby resulting products have been employed as electrodes, which was exemplified by electrodepositing copper onto them. Via ink-jet printing they have additionally been patterned and the resulting electrodes have also been post functionalised by electro-deposition of copper onto the graphitised (printed) parts of the samples. Lastly in a preliminary test the possibility of printing several metals simultaneously and thereby producing finely tuneable gradients from one metal to another have successfully been made. Starting from these concepts future experiments were outlined. The last chapter of this thesis concerned itself with alternative synthesis methods of the iron-carbon composite, thereby testing the robustness of the devolved reactions. By performing the synthesis with partly dissolved scrap metal and pieces of raw, dry wood, some progress for further use of the general synthesis technique were made. For example by using wood instead of processed cellulose all the established shaping techniques available for wooden objects, such as CNC milling or 3D prototyping, become accessible for the synthesis path. Also by using wood its intrinsic well defined porosity and the fact that large monoliths are obtained help expanding the prospect of using the composite. It was also demonstrated in this chapter that the resulting material can be applied for the environmentally important issue of waste water cleansing. Additionally to being made from renewable resources and by a cheap and easy one-pot synthesis, the material is recyclable, since the pollutants can be recovered by washing with ethanol. Most importantly this chapter covered experiments where the reaction was performed in a crude, home-built glass vessel, fuelled – with the help of a Fresnel lens – only by direct concentrated sunlight irradiation. This concept carries the thus far presented synthetic procedures from being common laboratory syntheses to a real world application. Based on cellulose, transition metals and simple equipment, this work enabled the easy one-pot synthesis of nano-ceramic and metal nanoparticle composites otherwise not readily accessible. Furthermore were structuring and patterning techniques and synthesis routes involving only renewable resources and environmentally benign procedures established here. Thereby it has laid the foundation for a multitude of applications and pointed towards several future projects reaching from fundamental research, to application focussed research and even and industry relevant engineering project was envisioned.
The contractile vacuole (CV) is an osmoregulatory organelle found exclusively in algae and protists. In addition to expelling excessive water out of the cell, it also expels ions and other metabolites and thereby contributes to the cell's metabolic homeostasis. The interest in the CV reaches beyond its immediate cellular roles. The CV's function is tightly related to basic cellular processes such as membrane dynamics and vesicle budding and fusion; several physiological processes in animals, such as synaptic neurotransmission and blood filtration in the kidney, are related to the CV's function; and several pathogens, such as the causative agents of sleeping sickness, possess CVs, which may serve as pharmacological targets. The green alga Chlamydomonas reinhardtii has two CVs. They are the smallest known CVs in nature, and they remain relatively untouched in the CV-related literature. Many genes that have been shown to be related to the CV in other organisms have close homologues in C. reinhardtii. We attempted to silence some of these genes and observe the effect on the CV. One of our genes, VMP1, caused striking, severe phenotypes when silenced. Cells exhibited defective cytokinesis and aberrant morphologies. The CV, incidentally, remained unscathed. In addition, mutant cells showed some evidence of disrupted autophagy. Several important regulators of the cell cycle as well as autophagy were found to be underexpressed in the mutant. Lipidomic analysis revealed many meaningful changes between wild-type and mutant cells, reinforcing the compromised-autophagy observation. VMP1 is a singular protein, with homologues in numerous eukaryotic organisms (aside from fungi), but usually with no relatives in each particular genome. Since its first characterization in 2002 it has been associated with several cellular processes and functions, namely autophagy, programmed cell-death, secretion, cell adhesion, and organelle biogenesis. It has been implicated in several human diseases: pancreatitis, diabetes, and several types of cancer. Our results reiterate some of the observations in VMP1's six reported homologues, but, importantly, show for the first time an involvement of this protein in cell division. The mechanisms underlying this involvement in Chlamydomonas, as well as other key aspects, such as VMP1's subcellular localization and interaction partners, still await elucidation.
Agriculture is one of the most important human activities providing food and more agricultural goods for seven billion people around the world and is of special importance in sub-Saharan Africa. The majority of people depends on the agricultural sector for their livelihoods and will suffer from negative climate change impacts on agriculture until the middle and end of the 21st century, even more if weak governments, economic crises or violent conflicts endanger the countries’ food security. The impact of temperature increases and changing precipitation patterns on agricultural vegetation motivated this thesis in the first place. Analyzing the potentials of reducing negative climate change impacts by adapting crop management to changing climate is a second objective of the thesis. As a precondition for simulating climate change impacts on agricultural crops with a global crop model first the timing of sowing in the tropics was improved and validated as this is an important factor determining the length and timing of the crops´ development phases, the occurrence of water stress and final crop yield. Crop yields are projected to decline in most regions which is evident from the results of this thesis, but the uncertainties that exist in climate projections and in the efficiency of adaptation options because of political, economical or institutional obstacles have to be considered. The effect of temperature increases and changing precipitation patterns on crop yields can be analyzed separately and varies in space across the continent. Southern Africa is clearly the region most susceptible to climate change, especially to precipitation changes. The Sahel north of 13° N and parts of Eastern Africa with short growing seasons below 120 days and limited wet season precipitation of less than 500 mm are also vulnerable to precipitation changes while in most other part of East and Central Africa, in contrast, the effect of temperature increase on crops overbalances the precipitation effect and is most pronounced in a band stretching from Angola to Ethiopia in the 2060s. The results of this thesis confirm the findings from previous studies on the magnitude of climate change impact on crops in sub-Saharan Africa but beyond that helps to understand the drivers of these changes and the potential of certain management strategies for adaptation in more detail. Crop yield changes depend on the initial growing conditions, on the magnitude of climate change, and on the crop, cropping system and adaptive capacity of African farmers which is only now evident from this comprehensive study for sub-Saharan Africa. Furthermore this study improves the representation of tropical cropping systems in a global crop model and considers the major food crops cultivated in sub-Saharan Africa and climate change impacts throughout the continent.
The Semantic Web provides information contained in the World Wide Web as machine-readable facts. In comparison to a keyword-based inquiry, semantic search enables a more sophisticated exploration of web documents. By clarifying the meaning behind entities, search results are more precise and the semantics simultaneously enable an exploration of semantic relationships. However, unlike keyword searches, a semantic entity-focused search requires that web documents are annotated with semantic representations of common words and named entities. Manual semantic annotation of (web) documents is time-consuming; in response, automatic annotation services have emerged in recent years. These annotation services take continuous text as input, detect important key terms and named entities and annotate them with semantic entities contained in widely used semantic knowledge bases, such as Freebase or DBpedia. Metadata of video documents require special attention. Semantic analysis approaches for continuous text cannot be applied, because information of a context in video documents originates from multiple sources possessing different reliabilities and characteristics. This thesis presents a semantic analysis approach consisting of a context model and a disambiguation algorithm for video metadata. The context model takes into account the characteristics of video metadata and derives a confidence value for each metadata item. The confidence value represents the level of correctness and ambiguity of the textual information of the metadata item. The lower the ambiguity and the higher the prospective correctness, the higher the confidence value. The metadata items derived from the video metadata are analyzed in a specific order from high to low confidence level. Previously analyzed metadata are used as reference points in the context for subsequent disambiguation. The contextually most relevant entity is identified by means of descriptive texts and semantic relationships to the context. The context is created dynamically for each metadata item, taking into account the confidence value and other characteristics. The proposed semantic analysis follows two hypotheses: metadata items of a context should be processed in descendent order of their confidence value, and the metadata that pertains to a context should be limited by content-based segmentation boundaries. The evaluation results support the proposed hypotheses and show increased recall and precision for annotated entities, especially for metadata that originates from sources with low reliability. The algorithms have been evaluated against several state-of-the-art annotation approaches. The presented semantic analysis process is integrated into a video analysis framework and has been successfully applied in several projects for the purpose of semantic video exploration of videos.
The sharply rising level of atmospheric carbon dioxide resulting from anthropogenic emissions is one of the greatest environmental concerns facing our civilization today. Metal-organic frameworks (MOFs) are a new class of materials that constructed by metal-containing nodes bonded to organic bridging ligands. MOFs could serve as an ideal platform for the development of next generation CO2 capture materials owing to their large capacity for the adsorption of gases and their structural and chemical tunability. The ability to rationally select the framework components is expected to allow the affinity of the internal pore surface toward CO2 to be precisely controlled, facilitating materials properties that are optimized for the specific type of CO2 capture to be performed (post-combustion capture, precombustion capture, or oxy-fuel combustion) and potentially even for the specific power plant in which the capture system is to be installed. For this reason, significant effort has been made in recent years in improving the gas separation performance of MOFs and some studies evaluating the prospects of deploying these materials in real-world CO2 capture systems have begun to emerge. We have developed six new MOFs, denoted as IFPs (IFP-5, -6, -7, -8, -9, -10, IFP = Imidazolate Framework Potsdam) and two hydrogen-bonded molecular building block (MBB, named as 1 and 2 for Zn and Co based, respectively) have been synthesized, characterized and applied for gas storage. The structure of IFP possesses 1D hexagonal channels. Metal centre and the substituent groups of C2 position of the linker protrude into the open channels and determine their accessible diameter. Interestingly, the channel diameters (range : 0.3 to 5.2 Å) for IFP structures are tuned by the metal centre (Zn, Co and Cd) and substituent of C2 position of the imidazolate linker. Moreover hydrogen bonded MBB of 1 and 2 is formed an in situ functionalization of a ligand under solvothermal condition. Two different types of channels are observed for 1 and 2. Materials contain solvent accessible void space. Solvent could be easily removed by under high vacuum. The porous framework has maintained the crystalline integrity even without solvent molecules. N2, H2, CO2 and CH4 gas sorption isotherms were performed. Gas uptake capacities are comparable with other frameworks. Gas uptake capacity is reduced when the channel diameter is narrow. For example, the channel diameter of IFP-5 (channel diameter: 3.8 Å) is slightly lower than that of IFP-1 (channel diameter: 4.2 Å); hence, the gas uptake capacity and Brunauer-Emmett-Teller (BET) surface area are slightly lower than IFP-1. The selectivity does not depend only on the size of the gas components (kinetic diameter: CO2 3.3 Å, N2 3.6 Å and CH4 3.8 ) but also on the polarizability of the surface and of the gas components. IFP-5 and-6 have the potential applications for the separation of CO2 and CH4 from N2-containing gas mixtures and CO2 and CH4 containing gas mixtures. Gas sorption isotherms of IFP-7, -8, -9, -10 exhibited hysteretic behavior due to flexible alkoxy (e.g., methoxy and ethoxy) substituents. Such phenomenon is a kind of gate effects which is rarely observed in microporous MOFs. IFP-7 (Zn-centred) has a flexible methoxy substituent. This is the first example where a flexible methoxy substituent shows the gate opening behavior in a MOF. Presence of methoxy functional group at the hexagonal channels, IFP-7 acted as molecular gate for N2 gas. Due to polar methoxy group and channel walls, wide hysteretic isotherm was observed during gas uptake. The N2 The estimated BET surface area for 1 is 471 m2 g-1 and the Langmuir surface area is 570 m2 g-1. However, such surface area is slightly higher than azolate-based hydrogen-bonded supramolecular assemblies and also comparable and higher than some hydrogen-bonded porous organic molecules.
Recent advances in microscopy have led to an improved visualization of different cell processes. Yet, this also leads to a higher demand of tools which can process images in an automated and quantitative fashion. Here, we present two applications that were developed to quantify different processes in eukaryotic cells which rely on the organization and dynamics of the cytoskeleton.. In plant cells, microtubules and actin filaments form the backbone of the cytoskeleton. These structures support cytoplasmic streaming, cell wall organization and tracking of cellular material to and from the plasma membrane. To better understand the underlying mechanisms of cytoskeletal organization, dynamics and coordination, frameworks for the quantification are needed. While this is fairly well established for the microtubules, the actin cytoskeleton has remained difficult to study due to its highly dynamic behaviour. One aim of this thesis was therefore to provide an automated framework to quantify and describe actin organization and dynamics. We used the framework to represent actin structures as networks and examined the transport efficiency in Arabidopsis thaliana hypocotyl cells. Furthermore, we applied the framework to determine the growth mode of cotton fibers and compared the actin organization in wild-type and mutant cells of rice. Finally, we developed a graphical user interface for easy usage. Microtubules and the actin cytoskeleton also play a major role in the morphogenesis of epidermal leaf pavement cells. These cells have highly complex and interdigitated shapes which are hard to describe in a quantitative way. While the relationship between microtubules, the actin cytoskeleton and shape formation is the object of many studies, it is still not clear how and if the cytoskeletal components predefine indentations and protrusions in pavement cell shapes. To understand the underlying cell processes which coordinate cell morphogenesis, a quantitative shape descriptor is needed. Therefore, the second aim of this thesis was the development of a network-based shape descriptor which captures global and local shape features, facilitates shape comparison and can be used to evaluate shape complexity. We demonstrated that our framework can be used to describe and compare shapes from various domains. In addition, we showed that the framework accurately detects local shape features of pavement cells and outperform contending approaches. In the third part of the thesis, we extended the shape description framework to describe pavement cell shape features on tissue-level by proposing different network representations of the underlying imaging data.
This thesis gives formal definitions of discourse-givenness, coreference and reference, and reports on experiments with computational models of discourse-givenness of noun phrases for English and German. Definitions are based on Bach's (1987) work on reference, Kibble and van Deemter's (2000) work on coreference, and Kamp and Reyle's Discourse Representation Theory (1993). For the experiments, the following corpora with coreference annotation were used: MUC-7, OntoNotes and ARRAU for Englisch, and TueBa-D/Z for German. As for classification algorithms, they cover J48 decision trees, the rule based learner Ripper, and linear support vector machines. New features are suggested, representing the noun phrase's specificity as well as its context, which lead to a significant improvement of classification quality.
In Chapter 1 of the dissertation, the role of social networks is analyzed as an important determinant in the search behavior of the unemployed. Based on the hypothesis that the unemployed generate information on vacancies through their social network, search theory predicts that individuals with large social networks should experience an increased productivity of informal search, and reduce their search in formal channels. Due to the higher productivity of search, unemployed with a larger network are also expected to have a higher reservation wage than unemployed with a small network. The model-theoretic predictions are tested and confirmed empirically. It is found that the search behavior of unemployed is significantly affected by the presence of social contacts, with larger networks implying a stronger substitution away from formal search channels towards informal channels. The substitution is particularly pronounced for passive formal search methods, i.e., search methods that generate rather non-specific types of job offer information at low relative cost. We also find small but significant positive effects of an increase of the network size on the reservation wage. These results have important implications on the analysis of the job search monitoring or counseling measures that are usually targeted at formal search only. Chapter 2 of the dissertation addresses the labor market effects of vacancy information during the early stages of unemployment. The outcomes considered are the speed of exit from unemployment, the effects on the quality of employment and the short-and medium-term effects on active labor market program (ALMP) participation. It is found that vacancy information significantly increases the speed of entry into employment; at the same time the probability to participate in ALMP is significantly reduced. Whereas the long-term reduction in the ALMP arises in consequence of the earlier exit from unemployment, we also observe a short-run decrease for some labor market groups which suggest that caseworker use high and low intensity activation measures interchangeably which is clearly questionable from an efficiency point of view. For unemployed who find a job through vacancy information we observe a small negative effect on the weekly number of hours worked. In Chapter 3, the long-term effects of participation in ALMP are assessed for unemployed youth under 25 years of age. Complementary to the analysis in Chapter 2, the effects of participation in time- and cost-intensive measures of active labor market policies are examined. In particular we study the effects of job creation schemes, wage subsidies, short-and long-term training measures and measures to promote the participation in vocational training. The outcome variables of interest are the probability to be in regular employment, and participation in further education during the 60 months following program entry. The analysis shows that all programs, except job creation schemes have positive and long-term effects on the employment probability of youth. In the short-run only short-term training measures generate positive effects, as long-term training programs and wage subsidies exhibit significant locking-in'' effects. Measures to promote vocational training are found to increase the probability of attending education and training significantly, whereas all other programs have either no or a negative effect on training participation. Effect heterogeneity with respect to the pre-treatment level education shows that young people with higher pre-treatment educational levels benefit more from participation most programs. However, for longer-term wage subsidies we also find strong positive effects for young people with low initial education levels. The relative benefit of training measures is higher in West than in East Germany. In the evaluation studies of Chapters 2 and 3 semi-parametric balancing methods of Propensity Score Matching (PSM) and Inverse Probability Weighting (IPW) are used to eliminate the effects of counfounding factors that influence both the treatment participation as well as the outcome variable of interest, and to establish a causal relation between program participation and outcome differences. While PSM and IPW are intuitive and methodologically attractive as they do not require parametric assumptions, the practical implementation may become quite challenging due to their sensitivity to various data features. Given the importance of these methods in the evaluation literature, and the vast number of recent methodological contributions in this field, Chapter 4 aims to reduce the knowledge gap between the methodological and applied literature by summarizing new findings of the empirical and statistical literature and practical guidelines for future applied research. In contrast to previous publications this study does not only focus on the estimation of causal effects, but stresses that the balancing challenge can and should be discussed independent of question of causal identification of treatment effects on most empirical applications. Following a brief outline of the practical implementation steps required for PSM and IPW, these steps are presented in detail chronologically, outlining practical advice for each step. Subsequently, the topics of effect estimation, inference, sensitivity analysis and the combination with parametric estimation methods are discussed. Finally, new extensions of the methodology and avenues for future research are presented.
Nowadays, software systems are getting more and more complex. To tackle this challenge most diverse techniques, such as design patterns, service oriented architectures (SOA), software development processes, and model-driven engineering (MDE), are used to improve productivity, while time to market and quality of the products stay stable. Multiple of these techniques are used in parallel to profit from their benefits. While the use of sophisticated software development processes is standard, today, MDE is just adopted in practice. However, research has shown that the application of MDE is not always successful. It is not fully understood when advantages of MDE can be used and to what degree MDE can also be disadvantageous for productivity. Further, when combining different techniques that aim to affect the same factor (e.g. productivity) the question arises whether these techniques really complement each other or, in contrast, compensate their effects. Due to that, there is the concrete question how MDE and other techniques, such as software development process, are interrelated. Both aspects (advantages and disadvantages for productivity as well as the interrelation to other techniques) need to be understood to identify risks relating to the productivity impact of MDE. Before studying MDE's impact on productivity, it is necessary to investigate the range of validity that can be reached for the results. This includes two questions. First, there is the question whether MDE's impact on productivity is similar for all approaches of adopting MDE in practice. Second, there is the question whether MDE's impact on productivity for an approach of using MDE in practice remains stable over time. The answers for both questions are crucial for handling risks of MDE, but also for the design of future studies on MDE success. This thesis addresses these questions with the goal to support adoption of MDE in future. To enable a differentiated discussion about MDE, the term MDE setting'' is introduced. MDE setting refers to the applied technical setting, i.e. the employed manual and automated activities, artifacts, languages, and tools. An MDE setting's possible impact on productivity is studied with a focus on changeability and the interrelation to software development processes. This is done by introducing a taxonomy of changeability concerns that might be affected by an MDE setting. Further, three MDE traits are identified and it is studied for which manifestations of these MDE traits software development processes are impacted. To enable the assessment and evaluation of an MDE setting's impacts, the Software Manufacture Model language is introduced. This is a process modeling language that allows to reason about how relations between (modeling) artifacts (e.g. models or code files) change during application of manual or automated development activities. On that basis, risk analysis techniques are provided. These techniques allow identifying changeability risks and assessing the manifestations of the MDE traits (and with it an MDE setting's impact on software development processes). To address the range of validity, MDE settings from practice and their evolution histories were capture in context of this thesis. First, this data is used to show that MDE settings cover the whole spectrum concerning their impact on changeability or interrelation to software development processes. Neither it is seldom that MDE settings are neutral for processes nor is it seldom that MDE settings have impact on processes. Similarly, the impact on changeability differs relevantly. Second, a taxonomy of evolution of MDE settings is introduced. In that context it is discussed to what extent different types of changes on an MDE setting can influence this MDE setting's impact on changeability and the interrelation to processes. The category of structural evolution, which can change these characteristics of an MDE setting, is identified. The captured MDE settings from practice are used to show that structural evolution exists and is common. In addition, some examples of structural evolution steps are collected that actually led to a change in the characteristics of the respective MDE settings. Two implications are: First, the assessed diversity of MDE settings evaluates the need for the analysis techniques that shall be presented in this thesis. Second, evolution is one explanation for the diversity of MDE settings in practice. To summarize, this thesis studies the nature and evolution of MDE settings in practice. As a result support for the adoption of MDE settings is provided in form of techniques for the identification of risks relating to productivity impacts.
Reading is a complex cognitive task based on the analyses of visual stimuli. Due to the physiology of the eye, only a small number of letters around the fixation position can be extracted with high visual acuity, while the visibility of words and letters outside this so-called foveal region quickly drops with increasing eccentricity. As a consequence, saccadic eye movements are needed to repeatedly shift the fovea to new words for visual word identification during reading. Moreover, even within a foveated word fixation positions near the word center are superior to other fixation positions for efficient word recognition (O’Regan, 1981; Brysbaert, Vitu, and Schroyens, 1996). Thus, most reading theories assume that readers aim specifically at word centers during reading (for a review see Reichle, Rayner, & Pollatsek, 2003). However, saccades’ landing positions within words during reading are in fact systematically modulated by the distance of the launch site from the word center (McConkie, Kerr, Reddix, & Zola, 1988). In general, it is largely unknown how readers identify the center of upcoming target words and there is no computational model of the sensorimotor translation of the decision for a target word into spatial word center coordinates. Here we present a series of three studies which aim at advancing the current knowledge about the computation of saccade target coordinates during saccade planning in reading. Based on a large corpus analyses, we firstly identified word skipping as a further factor beyond the launch-site distance with a likewise systematic and surprisingly large effect on within-word landing positions. Most importantly, we found that the end points of saccades after skipped word are shifted two and more letters to the left as compared to one-step saccades (i.e., from word N to word N+1) with equal launch-site distances. Then we present evidence from a single saccade experiment suggesting that the word-skipping effect results from highly automatic low-level perceptual processes, which are essentially based on the localization of blank spaces between words. Finally, in the third part, we present a Bayesian model of the computation of the word center from primary sensory measurements of inter-word spaces. We demonstrate that the model simultaneously accounts for launch-site and saccade-type contingent modulations of within-word landing positions in reading. Our results show that the spatial saccade target during reading is the result of complex estimations of the word center based on incomplete sensory information, which also leads to specific systematic deviations of saccades’ landing positions from the word center. Our results have important implications for current reading models and experimental reading research.
Transcription factors (TFs) are ubiquitous gene expression regulators and play essential roles in almost all biological processes. This Ph.D. project is primarily focused on the functional characterisation of MYB112 - a member of the R2R3-MYB TF family from the model plant Arabidopsis thaliana. This gene was selected due to its increased expression during senescence based on previous qRT-PCR expression profiling experiments of 1880 TFs in Arabidopsis leaves at three developmental stages (15 mm leaf, 30 mm leaf and 20% yellowing leaf). MYB112 promoter GUS fusion lines were generated to further investigate the expression pattern of MYB112. Employing transgenic approaches in combination with metabolomics and transcriptomics we demonstrate that MYB112 exerts a major role in regulation of plant flavonoid metabolism. We report enhanced and impaired anthocyanin accumulation in MYB112 overexpressors and MYB112-deficient mutants, respectively. Expression profiling reveals that MYB112 acts as a positive regulator of the transcription factor PAP1 leading to increased anthocyanin biosynthesis, and as a negative regulator of MYB12 and MYB111, which both control flavonol biosynthesis. We also identify MYB112 early responsive genes using a combination of several approaches. These include gene expression profiling (Affymetrix ATH1 micro-arrays and qRT-PCR) and transactivation assays in leaf mesophyll cell protoplasts. We show that MYB112 binds to an 8-bp DNA fragment containing the core sequence (A/T/G)(A/C)CC(A/T)(A/G/T)(A/C)(T/C). By electrophoretic mobility shift assay (EMSA) and chromatin immunoprecipitation coupled to qPCR (ChIP-qPCR) we demonstrate that MYB112 binds in vitro and in vivo to MYB7 and MYB32 promoters revealing them as direct downstream target genes. MYB TFs were previously reported to play an important role in controlling flavonoid biosynthesis in plants. Many factors acting upstream of the anthocyanin biosynthesis pathway show enhanced expression levels during nitrogen limitation, or elevated sucrose content. In addition to the mentioned conditions, other environmental parameters including salinity or high light stress may trigger anthocyanin accumulation. In contrast to several other MYB TFs affecting anthocyanin biosynthesis pathway genes, MYB112 expression is not controlled by nitrogen limitation, or carbon excess, but rather is stimulated by salinity and high light stress. Thus, MYB112 constitutes a previously uncharacterised regulatory factor that modifies anthocyanin accumulation under conditions of abiotic stress.
The Adana Basin of southern Turkey, situated at the SE margin of the Central Anatolian Plateau is ideally located to record Neogene topographic and tectonic changes in the easternmost Mediterranean realm. Using industry seismic reflection data we correlate 34 seismic profiles with corresponding exposed units in the Adana Basin. The time-depth conversion of the interpreted seismic profiles allows us to reconstruct the subsidence curve of the Adana Basin and to outline the occurrence of a major increase in both subsidence and sedimentation rates at 5.45 – 5.33 Ma, leading to the deposition of almost 1500 km3 of conglomerates and marls. Our provenance analysis of the conglomerates reveals that most of the sediment is derived from and north of the SE margin of the Central Anatolian Plateau. A comparison of these results with the composition of recent conglomerates and the present drainage basins indicates major changes between late Messinian and present-day source areas. We suggest that these changes in source areas result of uplift and ensuing erosion of the SE margin of the plateau. This hypothesis is supported by the comparison of the Adana Basin subsidence curve with the subsidence curve of the Mut Basin, a mainly Neogene basin located on top of the Central Anatolian Plateau southern margin, showing that the Adana Basin subsidence event is coeval with an uplift episode of the plateau southern margin. The collection of several fault measurements in the Adana region show different deformation styles for the NW and SE margins of the Adana Basin. The weakly seismic NW portion of the basin is characterized by extensional and transtensional structures cutting Neogene deposits, likely accomodating the differential uplift occurring between the basin and the SE margin of the plateau. We interpret the tectonic evolution of the southern flank of the Central Anatolian Plateau and the coeval subsidence and sedimentation in the Adana Basin to be related to deep lithospheric processes, particularly lithospheric delamination and slab break-off.