Refine
Year of publication
Document Type
- Article (53) (remove)
Keywords
- morphology (53) (remove)
Institute
- Department Linguistik (36)
- Institut für Physik und Astronomie (6)
- Institut für Chemie (4)
- Institut für Biochemie und Biologie (3)
- Department Psychologie (1)
- Humanwissenschaftliche Fakultät (1)
- Institut für Germanistik (1)
- Institut für Mathematik (1)
- Multilingualism (1)
- Potsdam Research Institute for Multilingualism (PRIM) (1)
The macroscale function of multicomponent polymeric materials is dependent on their phase-morphology. Here, we investigate the morphological structure of a multiblock copolymer consisting of poly(L-lactide) and poly(epsilon-caprolactone) segments (PLLA-PCL), physically cross-linked by stereocomplexation with a low molecular weight poly(D-lactide) oligomer (PDLA). The effects of blend composition and PLLA-PCL molecular structure on the morphology are elucidated by AFM, TEM and SAXS. We identify the formation of a lattice pattern, composed of PLA domains within a PCL matrix, with an average domain spacing d0 = 12 - 19 nm. The size of the PLA domains were found to be proportional to the block length of the PCL segment of the copolymer and inversely proportional to the PDLA content of the blend. Changing the PLLA-PCL / PDLA ratio caused a shift in the melt transition Tm attributed to the PLA stereocomplex crystallites, indicating partial amorphous phase dilution of the PLA and PCL components within the semicrystalline material. By elucidating the phase structure and thermal character of multifunctional PLLA-PCL / PDLA blends, we illustrate how composition affects the internal structure and thermal properties of multicomponent polymeric materials. This study should facilitate the more effective incorporation of a variety of polymeric structural units capable of stimuli responsive phase transitions, where an understanding the phase-morphology of each component will enable the production of multifunctional soft-actuators with enhanced performance.
Leben mit Paradoxien
(2019)
The genus Vanda and its affiliated taxa are a diverse group of horticulturally important species of orchids occurring mainly in South-East Asia, for which generic limits are poorly defined. Here, we present a molecular study using sequence data from three plastid DNA regions. It is shown that Vanda s.l. forms a clade containing approximately 73 species, including the previously accepted genera Ascocentrum, Euanthe, Christensonia, Neofinetia and Trudelia, and the species Aerides flabellata. Resolution of the phylogenetic relationships of species in Vanda s.l. is relatively poor, but existing morphological classifications for Vanda are incongruent with the results produced. Some novel species relationships are revealed, and a new morphological sectional classification is proposed based on support for these groupings and corresponding morphological characters shared by taxa and their geographical distributions. The putative occurrence of multiple pollination syndromes in this group of taxa, combined with complex biogeographical history of the South-East Asian region, is discussed in the context of these results.(c) 2013 The Linnean Society of London, Botanical Journal of the Linnean Society, 2013, 173, 549-572.
The present work investigated how morphological generalization, namely the way speakers extend their knowledge to novel complex words, is influenced by sources of variability in language and speaker properties. For this purpose, the study focused on a Semitic language (Hebrew), characterized by unique non-concatenative morphology, and native ( L1) as well as non-native (L2) speakers. Two elicited production tasks tested what information sources speakers employ in verbal inflectional class generalization, i.e., in forming complex novel verbs. Phonological similarity was tested in Experiment 1 and argument structure in Experiment 2. The analysis focused on the two most common Hebrew inflectional classes, Paal and Piel, which also constituted the vast majority of responses in the two tasks. Unlike the commonly found outcomes in Romance inflectional class generalization, the results yielded, solely for Piel, a graded phonological similarity effect and a robust argument structure effect, i.e., more Piel responses in a direct object context than without. The L2 pattern partially differed from the L1: (i) argument structure effect for L2 speakers was weaker, and (ii) L2 speakers produced more Paal than Piel responses. The results are discussed within the framework of rule-based and input-based accounts.
The review describes how morphological priming can be utilised to study the processing of morphologically complex words in bilinguals. The article starts with an overview of established experimental paradigms based on morphological priming, discusses a number of basic methodological pitfalls with regard to experimental design and materials, then reviews previous L2 morphological priming studies, and concludes with a brief discussion of recent developments in the field as well as possible future directions.
Previous research has shown that heritage speakers struggle with inflectional morphology. 'Limitations of online resources' for processing a non-dominant language has been claimed as one possible reason for these difficulties. To date, however, there is very little experimental evidence on real-time language processing in heritage speakers. Here we report results from a masked priming experiment with 97 bilingual (Turkish/German) heritage speakers and a control group of 40 non-heritage speakers of Turkish examining regular and irregular forms of the Turkish aorist. We found that, for the regular aorist, heritage speakers use the same morphological decomposition mechanism ('affix stripping') as control speakers, whereas for processing irregularly inflected forms they exhibited more variability (i.e., less homogeneous performance) than the control group. Heritage speakers also demonstrated semantic priming effects. At a more general level, these results indicate that heritage speakers draw on multiple sources of information for recognizing morphologically complex words.
On doubling unconditionals
(2019)
On uninterpretable features
(2019)
Previous research with younger adults has revealed differences between native (L1) and non-native late-bilingual (L2) speakers with respect to how morphologically complex words are processed. This study examines whether these L1/L2 differences persist into old age. We tested masked-priming effects for derived and inflected word forms in older L1 and L2 speakers of German and compared them to results from younger L1 and L2 speakers on the same experiment (mean ages: 62 vs. 24). We found longer overall response times paired with better accuracy scores for older (L1 and L2) participants than for younger participants. The priming patterns, however, were not affected by chronological age. While both L1 and L2 speakers showed derivational priming, only the L1 speakers demonstrated inflectional priming. We argue that general performance in both L1 and L2 is affected by aging, but that the more profound differences between native and non-native processing persist into old age.
Open porous foams with identical foam density but different pore-size distributions (bimodal or monomodal) are prepared from a shape-memory polyetherurethane (PEU) by thermally induced phase separation. The shape-memory effect of the two PEU foams is explored by cyclic thermomechanical compression tests and microstructural analysis. The obtained results reveal that the PEU foam with a bimodal pore-size distribution exhibits an increased shape-recovery under stress-free conditions, both on the macro- (foam level) as well as the microscale (pore level). While bimodal pore-size distributions induce microscale bending during compression, buckling occurs in foams with monomodal pore-size distributions, leading to both a reduced and delayed shape recovery.
Preface
(2019)
A fundamental understanding of the relationship between the bulk morphology and device performance is required for the further development of bulk heterojunction organic solar cells. Here, non-optimized (chloroform cast) and nearly optimized (solvent-annealed o-dichlorobenzene cast) P3HT:PCBM blend films treated over a range of annealing temperatures are studied via optical and photovoltaic device measurements. Parameters related to the P3HT aggregate morphology in the blend are obtained through a recently established analytical model developed by F. C. Spano for the absorption of weakly interacting H-aggregates. Thermally induced changes are related to the glass transition range of the blend. In the chloroform prepared devices, the improvement in device efficiency upon annealing within the glass transition range can be attributed to the growth of P3HT aggregates, an overall increase in the percentage of chain crystallinity, and a concurrent increase in the hole mobilities. Films treated above the glass transition range show an increase in efficiency and fill factor not only associated with the change in chain crystallinity, but also with a decrease in the energetic disorder. On the other hand, the properties of the P3HT phase in the solvent-annealed o-dichlorobenzene cast blends are almost indistinguishable from those of the corresponding pristine P3HT layer and are only weakly affected by thermal annealing. Apparently, slow drying of the blend allows the P3HT chains to crystallize into large domains with low degrees of intra- and interchain disorder. This morphology appears to be most favorable for the efficient generation and extraction of charges.
ShapeRotator
(2018)
The quantification of complex morphological patterns typically involves comprehensive shape and size analyses, usually obtained by gathering morphological data from all the structures that capture the phenotypic diversity of an organism or object. Articulated structures are a critical component of overall phenotypic diversity, but data gathered from these structures are difficult to incorporate into modern analyses because of the complexities associated with jointly quantifying 3D shape in multiple structures. While there are existing methods for analyzing shape variation in articulated structures in two-dimensional (2D) space, these methods do not work in 3D, a rapidly growing area of capability and research. Here, we describe a simple geometric rigid rotation approach that removes the effect of random translation and rotation, enabling the morphological analysis of 3D articulated structures. Our method is based on Cartesian coordinates in 3D space, so it can be applied to any morphometric problem that also uses 3D coordinates (e.g., spherical harmonics). We demonstrate the method by applying it to a landmark-based dataset for analyzing shape variation using geometric morphometrics. We have developed an R tool (ShapeRotator) so that the method can be easily implemented in the commonly used R package geomorph and MorphoJ software. This method will be a valuable tool for 3D morphological analyses in articulated structures by allowing an exhaustive examination of shape and size diversity.