Refine
Year of publication
- 2014 (222) (remove)
Document Type
- Doctoral Thesis (222) (remove)
Keywords
- Gammastrahlungsastronomie (4)
- data analysis (4)
- gamma-ray astronomy (4)
- Crab Nebula (3)
- Datenanalyse (3)
- Krebsnebel (3)
- Synchronisation (3)
- Systembiologie (3)
- synchronization (3)
- systems biology (3)
Institute
- Institut für Biochemie und Biologie (37)
- Institut für Physik und Astronomie (25)
- Institut für Geowissenschaften (19)
- Wirtschaftswissenschaften (15)
- Institut für Chemie (13)
- Historisches Institut (12)
- Institut für Informatik und Computational Science (10)
- Department Psychologie (9)
- Hasso-Plattner-Institut für Digital Engineering gGmbH (9)
- Institut für Ernährungswissenschaft (8)
Galaxies are observational probes to study the Large Scale Structure. Their gravitational motions are tracers of the total matter density and therefore of the Large Scale Structure. Besides, studies of structure formation and galaxy evolution rely on numerical cosmological simulations. Still, only one universe observable from a given position, in time and space, is available for comparisons with simulations. The related cosmic variance affects our ability to interpret the results. Simulations constrained by observational data are a perfect remedy to this problem. Achieving such simulations requires the projects Cosmic flows and CLUES. Cosmic flows builds catalogs of accurate distance measurements to map deviations from the expansion. These measures are mainly obtained with the galaxy luminosity-rotation rate correlation. We present the calibration of that relation in the mid-infrared with observational data from Spitzer Space Telescope. Resulting accurate distance estimates will be included in the third catalog of the project. In the meantime, two catalogs up to 30 and 150 Mpc/h have been released. We report improvements and applications of the CLUES' method on these two catalogs. The technique is based on the constrained realization algorithm. The cosmic displacement field is computed with the Zel'dovich approximation. This latter is then reversed to relocate reconstructed three-dimensional constraints to their precursors' positions in the initial field. The size of the second catalog (8000 galaxies within 150 Mpc/h) highlighted the importance of minimizing the observational biases. By carrying out tests on mock catalogs, built from cosmological simulations, a method to minimize observational bias can be derived. Finally, for the first time, cosmological simulations are constrained solely by peculiar velocities. The process is successful as resulting simulations resemble the Local Universe. The major attractors and voids are simulated at positions approaching observational positions by a few megaparsecs, thus reaching the limit imposed by the linear theory.
Mars is one of the best candidates among planetary bodies for supporting life. The presence of water in the form of ice and atmospheric vapour together with the availability of biogenic elements and energy are indicators of the possibility of hosting life as we know it. The occurrence of permanently frozen ground – permafrost, is a common phenomenon on Mars and it shows multiple morphological analogies with terrestrial permafrost. Despite the extreme inhospitable conditions, highly diverse microbial communities inhabit terrestrial permafrost in large numbers. Among these are methanogenic archaea, which are anaerobic chemotrophic microorganisms that meet many of the metabolic and physiological requirements for survival on the martian subsurface. Moreover, methanogens from Siberian permafrost are extremely resistant against different types of physiological stresses as well as simulated martian thermo-physical and subsurface conditions, making them promising model organisms for potential life on Mars. The main aims of this investigation are to assess the survival of methanogenic archaea under Mars conditions, focusing on methanogens from Siberian permafrost, and to characterize their biosignatures by means of Raman spectroscopy, a powerful technology for microbial identification that will be used in the ExoMars mission. For this purpose, methanogens from Siberian permafrost and non-permafrost habitats were subjected to simulated martian desiccation by exposure to an ultra-low subfreezing temperature (-80ºC) and to Mars regolith (S-MRS and P-MRS) and atmospheric analogues. They were also exposed to different concentrations of perchlorate, a strong oxidant found in martian soils. Moreover, the biosignatures of methanogens were characterized at the single-cell level using confocal Raman microspectroscopy (CRM). The results showed survival and methane production in all methanogenic strains under simulated martian desiccation. After exposure to subfreezing temperatures, Siberian permafrost strains had a faster metabolic recovery, whereas the membranes of non-permafrost methanogens remained intact to a greater extent. The strain Methanosarcina soligelidi SMA-21 from Siberian permafrost showed significantly higher methane production rates than all other strains after the exposure to martian soil and atmospheric analogues, and all strains survived the presence of perchlorate at the concentration on Mars. Furthermore, CRM analyses revealed remarkable differences in the overall chemical composition of permafrost and non-permafrost strains of methanogens, regardless of their phylogenetic relationship. The convergence of the chemical composition in non-sister permafrost strains may be the consequence of adaptations to the environment, and could explain their greater resistance compared to the non-permafrost strains. As part of this study, Raman spectroscopy was evaluated as an analytical technique for remote detection of methanogens embedded in a mineral matrix. This thesis contributes to the understanding of the survival limits of methanogenic archaea under simulated martian conditions to further assess the hypothetical existence of life similar to methanogens on the martian subsurface. In addition, the overall chemical composition of methanogens was characterized for the first time by means of confocal Raman microspectroscopy, with potential implications for astrobiological research.
Diese Arbeit befasst sich mit den sogenannten relativähnlichen Sätzen im Frühneuhochdeutschen und leistet somit einen Beitrag zur Subordinationsforschung des älteren Deutsch. Relativähnliche Sätze sind formal durch ein satzinitiales anaphorisches d-Element und die Endstellung des finiten Verbs gekennzeichnet. Semantisch gesehen beziehen sie sich auf den vorangehenden Satz als Ganzes, indem sie ihn in bestimmter Weise weiterführen oder kommentieren. In der bisherigen Forschung werden diese Sätze satztypologisch als Hauptsätze mit Verbendstellung analysiert (vgl. dazu Maurer 1926, Behaghel 1932 und Lötscher 2000). Nach der ausführlichen Diskussion der formalen Abhängigkeitsmarker im älteren Deutsch sowie anhand einer umfangreichen korpusbasierten Untersuchung wird in dieser Arbeit gezeigt, dass relativähnliche Sätze im Frühneuhochdeutschen auch als abhängige Sätze - analog zu den weiterführenden Relativsätzen im Gegenwartsdeutschen - analysiert werden können. Die weiterführenden Relativsätze im Gegenwartsdeutschen enthalten satzinitial auch ein anaphorisches Element, das sich auf das Gesagte in dem vorangehenden Satz bezieht. Verbendstellung weisen sie ebenfalls auf (mehr zur Grammatik der weiterführenden Relativsätze vgl. insb. Brandt 1990 und Holler 2005). Über die Untersuchung relativähnlicher Sätze hinaus befasst sich diese Arbeit ausführlich mit formalen Abhängigkeitsmarkern des älteren Deutsch, wie Verbendstellung, Einleiter und afinite Konstruktion.
The purpose of this thesis is to develop an automated inversion scheme to derive point and finite source parameters for weak earthquakes, here intended with the unusual meaning of earthquakes with magnitudes at the limit or below the bottom magnitude threshold of standard source inversion routines. The adopted inversion approaches entirely rely on existing inversion software, the methodological work mostly targeting the development and tuning of optimized inversion flows. The resulting inversion scheme is tested for very different datasets, and thus allows the discussion on the source inversion problem at different scales. In the first application, dealing with mining induced seismicity, the source parameters determination is addressed at a local scale, with source-sensor distance of less than 3 km. In this context, weak seismicity corresponds to event below magnitude MW 2.0, which are rarely target of automated source inversion routines. The second application considers a regional dataset, namely the aftershock sequence of the 2010 Maule earthquake (Chile), using broadband stations at regional distances, below 300 km. In this case, the magnitude range of the target aftershocks range down to MW 4.0. This dataset is here considered as a weak seismicity case, since the analysis of such moderate seismicity is generally investigated only by moment tensor inversion routines, with no attempt to resolve source duration or finite source parameters. In this work, automated multi-step inversion schemes are applied to both datasets with the aim of resolving point source parameters, both using double couple (DC) and full moment tensor (MT) models, source duration and finite source parameters. A major result of the analysis of weaker events is the increased size of resulting moment tensor catalogues, which interpretation may become not trivial. For this reason, a novel focal mechanism clustering approach is used to automatically classify focal mechanisms, allowing the investigation of the most relevant and repetitive rupture features. The inversion of the mining induced seismicity dataset reveals the repetitive occurrence of similar rupture processes, where the source geometry is controlled by the shape of the mined panel. Moreover, moment tensor solutions indicate a significant contribution of tensile processes. Also the second application highlights some characteristic geometrical features of the fault planes, which show a general consistency with the orientation of the slab. The additional inversion for source duration allowed to verify the empirical correlation for moment normalized earthquakes in subduction zones among a decreasing rupture duration with increasing source depth, which was so far only observed for larger events.
Polypeptoid block coloymers
(2014)
Die Häufung von Diabetes, Herz-Kreislauf-Erkrankungen und einigen Krebsarten, deren Entstehung auf Übergewicht und Bewegungsmangel zurückzuführen sind, ist ein aktuelles Problem unserer Gesellschaft. Insbesondere mit fortschreitendem Alter nehmen die damit einhergehenden Komplikationen zu. Umso bedeutender ist das Verständnis der pathologischen Mechanismen in Folge von Adipositas, Bewegungsmangel, des Alterungsprozesses und den Einfluss-nehmenden Faktoren.
Ziel dieser Arbeit war die Entstehung metabolischer Erkrankungen beim Menschen zu untersuchen. Die Auswertung von Verlaufsdaten anthropometrischer und metabolischer Parameter der 584 Teilnehmern der prospektiven ‚Metabolisches Syndrom Berlin Potsdam Follow-up Studie‘ wies für die gesamte Kohorte einen Anstieg an Übergewicht, ebenso eine Verschlechterung des Blutdrucks und des Glukosestoffwechsels auf. Wir untersuchten, ob das Hormon FGF21 Einfluss an dem Auftreten eines Diabetes mellitus Typ 2 (T2DM) oder des Metabolischen Syndroms (MetS) hat. Wir konnten zeigen, dass Personen, die später ein MetS entwickeln, bereits zu Studienbeginn einen erhöhten FGF21-Spiegel, einen höheren BMI, WHR, Hb1Ac und diastolischen Blutdruck aufwiesen. Neben FGF21 wurde auch Vaspin in diesem Zusammenhang untersucht. Es zeigte sich, dass Personen, die später einen T2DM entwickeln, neben einer Erhöhung klinischer Parameter tendenziell erhöhte Spiegel des Hormons aufwiesen. Mit FGF21 und Vaspin wurden hier zwei neue Faktoren für die Vorhersage des Metabolischen Syndroms bzw. Diabetes mellitus Typ 2 identifiziert.
Der langfristige Effekt einer Gewichtsreduktion wurde in einer Subkohorte von 60 Personen untersucht. Der überwiegende Teil der Probanden mit Gewichtsabnahme-Intervention nahm in der ersten sechsmonatigen Phase erfolgreich ab. Jedoch zeigte sich ein deutlicher Trend zur Wiederzunahme des verlorenen Gewichts über den Beobachtungszeitraum von fünf Jahren. Von besonderem Interesse war die Abschätzung des kardiovaskulären Risikos über den Framingham Score. Es wurde deutlich, dass für Personen mit konstanter Gewichtsabnahme ein deutlich geringeres kardiovaskuläres Risiko bestand. Hingegen zeigten Personen mit konstanter Wiederzunahme oder starken Gewichtsschwankungen ein hohes kardiovaskuläres Risiko. Unsere Daten legten nahe, dass eine erfolgreiche dauerhafte Gewichtsreduktion statistisch mit einem erniedrigten kardiovaskulären Risiko assoziiert ist, während Probanden mit starken Gewichtsschwankungen oder einer Gewichtszunahme ein gesteigertes Risiko haben könnten.
Um die Interaktion der molekularen Vorgänge hinsichtlich der Gewichtsreduktion und Lebensspanne untersuchen zu können, nutzen wir den Modellorganismus C.elegans. Eine kontinuierliche Restriktion wirkte sich verlängernd, eine Überversorgung verkürzend auf die Lebensspanne des Rundwurms aus. Der Einfluss eines zeitlich eingeschränkten, intermittierenden Nahrungsregimes, analog zum Weight-Cycling im Menschen, auf die Lebensspanne war von großem Interesse. Dieser regelmäßige Wechsel zwischen ad libitum Fütterung und Restriktion hatte in Abhängigkeit von der Häufigkeit der Restriktion einen unterschiedlich starken lebensverlängernden Effekt. Phänomene, wie Gewichtswiederzunahmen, sind in C.elegans nicht zu beobachten und beruhen vermutlich auf einem Mechanismus ist, der evolutionär jünger und in C.elegans noch nicht angelegt ist.
Um neue Stoffwechselwege zu identifizieren, die die Lebensspanne beeinflussen, wurden Metabolitenprofile genetischer als auch diätetischer Langlebigkeitsmodelle analysiert. Diese Analysen wiesen den Tryptophan-Stoffwechsel als einen neuen, bisher noch nicht im Fokus stehenden Stoffwechselweg aus, der mit Langlebigkeit in Verbindung steht.
The role of flavonols and anthocyanins in the cold an UV-B acclimation of Arabidopsis thaliana (L.)
(2014)
The mystery of the origin of cosmic rays has been tackled for more than hundred years and is still not solved. Cosmic rays are detected with energies spanning more than 10 orders of magnitude and reaching energies up to ~10²¹ eV, far higher than any man-made accelerator can reach. Different theories on the astrophysical objects and processes creating such highly energetic particles have been proposed.
A very prominent explanation for a process producing highly energetic particles is shock acceleration. The observation of high-energy gamma rays from supernova remnants, some of them revealing a shell like structure, is clear evidence that particles are accelerated to ultrarelativistic energies in the shocks of these objects. The environments of supernova remnants are complex and challenge detailed modelling of the processes leading to high-energy gamma-ray emission.
The study of shock acceleration at bow shocks, created by the supersonic movement of individual stars through the interstellar medium, offers a unique possibility to determine the physical properties of shocks in a less complex environment. The shocked medium is heated by the stellar and the shock excited radiation, leading to thermal infrared emission. 28 bow shocks have been discovered through their infrared emission. Nonthermal radiation in radio and X-ray wavelengths has been detected from two bow shocks, pointing to the existence of relativistic particles in these systems. Theoretical models of the emission processes predict high-energy and very high-energy emission at a flux level in reach of current instruments. This work presents the search for gamma-ray emission from bow shocks of runaway stars in the energy regime from 100MeV to ~100TeV.
The search is performed with the large area telescope (LAT) on-board the Fermi satellite and the H.E.S.S. telescopes located in the Khomas Highland in Namibia. The Fermi-LAT was launched in 2008 and is continuously scanning the sky since then. It detects photons with energies from 20MeV to over 300 GeV and has an unprecedented sensitivity. The all-sky coverage allows us to study all 28 bow shocks of runaway stars listed in the E-BOSS catalogue of infrared bow shocks. No significant emission was detected from any of the objects, although predicted by several theoretical models describing the non-thermal emission of bow shocks of runaway stars.
The H.E.S.S. experiment is the most sensitive system of imaging atmospheric Cherenkov telescopes. It detects photons from several tens of GeV to ~100TeV. Seven of the bow shocks have been observed with H.E.S.S. and the data analysis is presented in this thesis. The analyses of the very-high energy data did not reveal significant emission from any of the sources either.
This work presents the first systematic search for gamma-ray emission from bow shocks of runaway stars. For the first time Fermi-LAT data was specifically analysed to reveal emission from bow shocks of runaway stars. In the TeV regime no searches for emission from theses objects have been published so far, the study presented here is the first in this energy regime. The level of the gamma-ray emission from bow shocks of runaway stars is constrained by the calculated upper limits over six orders in magnitude in energy.
The upper limits calculated for the bow shocks of runaway stars in the course of this work, constrain several models. For the best candidate, ζ Ophiuchi, the upper limits in the Fermi-LAT energy range are lower than the predictions by a factor ~5. This challenges the assumptions made in this model and gives valuable input for further modelling approaches.
The analyses were performed with the software packages provided by the H.E.S.S. and Fermi collaborations. The development of a unified analysis framework for gamma-ray data, namely GammaLib/ctools, is rapidly progressing within the CTA consortium. Recent implementations and cross-checks with current software frameworks are presented in the Appendix.
Schlucken ist ein lebensnotwendiger Prozess, dessen Diagnose und Therapie eine enorme Herausforderung bedeutet. Die Erkennung und Beurteilung von Schlucken und Schluckstörungen erfordert den Einsatz von technisch aufwendigen Verfahren, wie Videofluoroskopie (VFSS) und fiberoptisch-endoskopische Schluckuntersuchung (FEES), die eine hohe Belastung für die Patienten darstellen. Beide Verfahren werden als Goldstandard in der Diagnostik von Schluckstörungen eingesetzt. Die Durchführung obliegt in der Regel ärztlichem Personal. Darüber hinaus erfordert die Auswertung des Bildmaterials der Diagnostik eine ausreichend hohe Erfahrung. In der Therapie findet neben den klassischen Therapiemethoden, wie z.B. diätetische Modifikationen und Schluckmanöver, auch zunehmend die funktionelle Elektrostimulation Anwendung. Ziel der vorliegenden Dissertationsschrift ist die Evaluation eines im Verbundprojekt BigDysPro entwickelten Bioimpedanz (BI)- und Elektromyographie (EMG)-Messsystems. Es wurde geprüft, ob sich das BI- und EMG-Messsystem eignet, sowohl in der Diagnostik als auch in der Therapie als eigenständiges Messsystem und im Rahmen einer Schluckneuroprothese eingesetzt zu werden. In verschiedenen Studien wurden gesunde Probanden für die Überprüfung der Reproduzierbarkeit (Intra-und Interrater-Reliabilität), der Unterscheidbarkeit von Schluck- und Kopfbewegungen und der Beeinflussung der Biosignale (BI, EMG) durch verschiedene Faktoren (Geschlecht der Probanden, Leitfähigkeit, Konsistenz und Menge der Nahrung) untersucht. Durch zusätzliche Untersuchungen mit Patienten wurde einerseits der Einfluss der Elektrodenart geprüft. Andererseits wurden parallel zur BI- und EMG-Messung auch endoskopische (FEES) und radiologische Schluckuntersuchungen (VFSS) durchgeführt, um die Korrelation der Biosignale mit der Bewegung anatomischer Strukturen (VFSS) und mit der Schluckqualität (FEES) zu prüfen. Es wurden 31 gesunde Probanden mit 1819 Schlucken und 60 Patienten mit 715 Schlucken untersucht. Die Messkurven zeigten einen typischen, reproduzierbaren Signalverlauf, der mit anatomischen und funktionellen Änderungen während der pharyngalen Schluckphase in der VFSS korrelierte (r > 0,7). Aus dem Bioimpedanzsignal konnten Merkmale extrahiert werden, die mit physiologischen Merkmalen eines Schluckes, wie verzögerter laryngealer Verschluss und Kehlkopfhebung, korrelierten und eine Einschätzung der Schluckqualität in Übereinstimmung mit der FEES ermöglichten. In den Signalverläufen der Biosignale konnten signifikante Unterschiede zwischen Schluck- und Kopfbewegungen und den Nahrungsmengen und -konsistenzen nachgewiesen werden. Im Gegensatz zur Nahrungsmenge und -konsistenz zeigte die Leitfähigkeit der zu schluckenden Nahrung, das Geschlecht der Probanden und die Art der Elektroden keinen signifikanten Einfluss auf die Messsignale. Mit den Ergebnissen der Evaluation konnte gezeigt werden, dass mit dem BI- und EMG-Messsystem ein neuartiges und nicht-invasives Verfahren zur Verfügung steht, das eine reproduzierbare Darstellung der pharyngalen Schluckphase und ihrer Veränderungen ermöglicht. Daraus ergeben sich vielseitige Einsatzmöglichkeiten in der Diagnostik, z.B. Langzeitmessung zur Schluckfrequenz und Einschätzung der Schluckqualität, und in der Therapie, z.B. der Einsatz in einer Schluckneuroprothese oder als Biofeedback zur Darstellung des Schluckes, von Schluckstörungen.
Donor-acceptor (D-A) copolymers have revolutionized the field of organic electronics over the last decade. Comprised of a electron rich and an electron deficient molecular unit, these copolymers facilitate the systematic modification of the material's optoelectronic properties. The ability to tune the optical band gap and to optimize the molecular frontier orbitals as well as the manifold of structural sites that enable chemical modifications has created a tremendous variety of copolymer structures. Today, these materials reach or even exceed the performance of amorphous inorganic semiconductors. Most impressively, the charge carrier mobility of D-A copolymers has been pushed to the technologically important value of 10 cm^{2}V^{-1}s^{-1}. Furthermore, owed to their enormous variability they are the material of choice for the donor component in organic solar cells, which have recently surpassed the efficiency threshold of 10%. Because of the great number of available D-A copolymers and due to their fast chemical evolution, there is a significant lack of understanding of the fundamental physical properties of these materials. Furthermore, the complex chemical and electronic structure of D-A copolymers in combination with their semi-crystalline morphology impede a straightforward identification of the microscopic origin of their superior performance. In this thesis, two aspects of prototype D-A copolymers were analysed. These are the investigation of electron transport in several copolymers and the application of low band gap copolymers as acceptor component in organic solar cells. In the first part, the investigation of a series of chemically modified fluorene-based copolymers is presented. The charge carrier mobility varies strongly between the different derivatives, although only moderate structural changes on the copolymers structure were made. Furthermore, rather unusual photocurrent transients were observed for one of the copolymers. Numerical simulations of the experimental results reveal that this behavior arises from a severe trapping of electrons in an exponential distribution of trap states. Based on the comparison of simulation and experiment, the general impact of charge carrier trapping on the shape of photo-CELIV and time-of-flight transients is discussed. In addition, the high performance naphthalenediimide (NDI)-based copolymer P(NDI2OD-T2) was characterized. It is shown that the copolymer posses one of the highest electron mobilities reported so far, which makes it attractive to be used as the electron accepting component in organic photovoltaic cells.\par Solar cells were prepared from two NDI-containing copolymers, blended with the hole transporting polymer P3HT. I demonstrate that the use of appropriate, high boiling point solvents can significantly increase the power conversion efficiency of these devices. Spectroscopic studies reveal that the pre-aggregation of the copolymers is suppressed in these solvents, which has a strong impact on the blend morphology. Finally, a systematic study of P3HT:P(NDI2OD-T2) blends is presented, which quantifies the processes that limit the efficiency of devices. The major loss channel for excited states was determined by transient and steady state spectroscopic investigations: the majority of initially generated electron-hole pairs is annihilated by an ultrafast geminate recombination process. Furthermore, exciton self-trapping in P(NDI2OD-T2) domains account for an additional reduction of the efficiency. The correlation of the photocurrent to microscopic morphology parameters was used to disclose the factors that limit the charge generation efficiency. Our results suggest that the orientation of the donor and acceptor crystallites relative to each other represents the main factor that determines the free charge carrier yield in this material system. This provides an explanation for the overall low efficiencies that are generally observed in all-polymer solar cells.
The tropical warm pool waters surrounding Indonesia are one of the equatorial heat and moisture sources that are considered as a driving force of the global climate system. The climate in Indonesia is dominated by the equatorial monsoon system, and has been linked to El Niño-Southern Oscillation (ENSO) events, which often result in severe droughts or floods over Indonesia with profound societal and economic impacts on the populations living in the world's fourth most populated country. The latest IPCC report states that ENSO will remain the dominant mode in the tropical Pacific with global effects in the 21st century and ENSO-related precipitation extremes will intensify. However, no common agreement exists among climate simulation models for projected change in ENSO and the Australian-Indonesian Monsoon. Exploring high-resolution palaeoclimate archives, like tree rings or varved lake sediments, provide insights into the natural climate variability of the past, and thus helps improving and validating simulations of future climate changes. Centennial tree-ring stable isotope records | Within this doctoral thesis the main goal was to explore the potential of tropical tree rings to record climate signals and to use them as palaeoclimate proxies. In detail, stable carbon (δ13C) and oxygen (δ18O) isotopes were extracted from teak trees in order to establish the first well-replicated centennial (AD 1900-2007) stable isotope records for Java, Indonesia. Furthermore, different climatic variables were tested whether they show significant correlation with tree-ring proxies (ring-width, δ13C, δ18O). Moreover, highly resolved intra-annual oxygen isotope data were established to assess the transfer of the seasonal precipitation signal into the tree rings. Finally, the established oxygen isotope record was used to reveal possible correlations with ENSO events. Methodological achievements | A second goal of this thesis was to assess the applicability of novel techniques which facilitate and optimize high-resolution and high-throughput stable isotope analysis of tree rings. Two different UV-laser-based microscopic dissection systems were evaluated as a novel sampling tool for high-resolution stable isotope analysis. Furthermore, an improved procedure of tree-ring dissection from thin cellulose laths for stable isotope analysis was designed. The most important findings of this thesis are: I) The herein presented novel sampling techniques improve stable isotope analyses for tree-ring studies in terms of precision, efficiency and quality. The UV-laser-based microdissection serve as a valuable tool for sampling plant tissue at ultrahigh-resolution and for unprecedented precision. II) A guideline for a modified method of cellulose extraction from wholewood cross-sections and subsequent tree-ring dissection was established. The novel technique optimizes the stable isotope analysis process in two ways: faster and high-throughput cellulose extraction and precise tree-ring separation at annual to high-resolution scale. III) The centennial tree-ring stable isotope records reveal significant correlation with regional precipitation. High-resolution stable oxygen values, furthermore, allow distinguishing between dry and rainy season rainfall. IV) The δ18O record reveals significant correlation with different ENSO flavors and demonstrates the importance of considering ENSO flavors when interpreting palaeoclimatic data in the tropics. The findings of my dissertation show that seasonally resolved δ18O records from Indonesian teak trees are a valuable proxy for multi-centennial reconstructions of regional precipitation variability (monsoon signals) and large-scale ocean-atmosphere phenomena (ENSO) for the Indo-Pacific region. Furthermore, the novel methodological achievements offer many unexplored avenues for multidisciplinary research in high-resolution palaeoclimatology.
Cloud-RAID
(2014)
Protein-metal coordination complexes are well known as active centers in enzymatic catalysis, and to contribute to signal transduction, gas transport, and to hormone function. Additionally, they are now known to contribute as load-bearing cross-links to the mechanical properties of several biological materials, including the jaws of Nereis worms and the byssal threads of marine mussels. The primary aim of this thesis work is to better understand the role of protein-metal cross-links in the mechanical properties of biological materials, using the mussel byssus as a model system. Specifically, the focus is on histidine-metal cross-links as sacrificial bonds in the fibrous core of the byssal thread (Chapter 4) and L-3,4-dihydroxyphenylalanine (DOPA)-metal bonds in the protective thread cuticle (Chapter 5).
Byssal threads are protein fibers, which mussels use to attach to various substrates at the seashore. These relatively stiff fibers have the ability to extend up to about 100 % strain, dissipating large amounts of mechanical energy from crashing waves, for example. Remarkably, following damage from cyclic loading, initial mechanical properties are subsequently recovered by a material-intrinsic self-healing capability. Histidine residues coordinated to transition metal ions in the proteins comprising the fibrous thread core have been suggested as reversible sacrificial bonds that contribute to self-healing; however, this remains to be substantiated in situ. In the first part of this thesis, the role of metal coordination bonds in the thread core was investigated using several spectroscopic methods. In particular, X-ray absorption spectroscopy (XAS) was applied to probe the coordination environment of zinc in Mytilus californianus threads at various stages during stretching and subsequent healing. Analysis of the extended X-ray absorption fine structure (EXAFS) suggests that tensile deformation of threads is correlated with the rupture of Zn-coordination bonds and that self-healing is connected with the reorganization of Zn-coordination bond topologies rather than the mere reformation of Zn-coordination bonds. These findings have interesting implications for the design of self-healing metallopolymers.
The byssus cuticle is a protective coating surrounding the fibrous thread core that is both as hard as an epoxy and extensible up to 100 % strain before cracking. It was shown previously that cuticle stiffness and hardness largely depend on the presence of Fe-DOPA coordination bonds. However, the byssus is known to concentrate a large variety of metals from seawater, some of which are also capable of binding DOPA (e.g. V). Therefore, the question arises whether natural variation of metal composition can affect the mechanical performance of the byssal thread cuticle. To investigate this hypothesis, nanoindentation and confocal Raman spectroscopy were applied to the cuticle of native threads, threads with metals removed (EDTA treated), and threads in which the metal ions in the native tissue were replaced by either Fe or V. Interestingly, replacement of metal ions with either Fe or V leads to the full recovery of native mechanical properties with no statistical difference between each other or the native properties. This likely indicates that a fixed number of metal coordination sites are maintained within the byssal thread cuticle – possibly achieved during thread formation – which may provide an evolutionarily relevant mechanism for maintaining reliable mechanics in an unpredictable environment.
While the dynamic exchange of bonds plays a vital role in the mechanical behavior and self-healing in the thread core by allowing them to act as reversible sacrificial bonds, the compatibility of DOPA with other metals allows an inherent adaptability of the thread cuticle to changing circumstances. The requirements to both of these materials can be met by the dynamic nature of the protein-metal cross-links, whereas covalent cross-linking would fail to provide the adaptability of the cuticle and the self-healing of the core. In summary, these studies of the thread core and the thread cuticle serve to underline the important and dynamic roles of protein-metal coordination in the mechanical function of load-bearing protein fibers, such as the mussel byssus.
The atmosphere over the Arctic Ocean is strongly influenced by the distribution of sea ice and open water. Leads in the sea ice produce strong convective fluxes of sensible and latent heat and release aerosol particles into the atmosphere. They increase the occurrence of clouds and modify the structure and characteristics of the atmospheric boundary layer (ABL) and thereby influence the Arctic climate.
In the course of this study aircraft measurements were performed over the western Arctic Ocean as part of the campaign PAMARCMIP 2012 of the Alfred Wegener Institute for Polar and Marine Research (AWI). Backscatter from aerosols and clouds within the lower troposphere and the ABL were measured with the nadir pointing Airborne Mobile Aerosol Lidar (AMALi) and dropsondes were launched to obtain profiles of meteorological variables. Furthermore, in situ measurements of aerosol properties, meteorological variables and turbulence were part of the campaign. The measurements covered a broad range of atmospheric and sea ice conditions.
In this thesis, properties of the ABL over Arctic sea ice with a focus on the influence of open leads are studied based on the data from the PAMARCMIP campaign. The height of the ABL is determined by different methods that are applied to dropsonde and AMALi backscatter profiles. ABL heights are compared for different flights representing different conditions of the atmosphere and of sea ice and open water influence. The different criteria for ABL height that are applied show large variation in terms of agreement among each other, depending on the characteristics of the ABL and its history. It is shown that ABL height determination from lidar backscatter by methods commonly used under mid-latitude conditions is applicable to the Arctic ABL only under certain conditions. Aerosol or clouds within the ABL are needed as a tracer for ABL height detection from backscatter. Hence an aerosol source close to the surface is necessary, that is typically found under the present influence of open water and therefore convective conditions. However it is not always possible to distinguish residual layers from the actual ABL. Stable boundary layers are generally difficult to detect.
To illustrate the complexity of the Arctic ABL and processes therein, four case studies are analyzed each of which represents a snapshot of the interplay between atmosphere and underlying sea ice or water surface. Influences of leads and open water on the aerosol and clouds within the ABL are identified and discussed. Leads are observed to cause the formation of fog and cloud layers within the ABL by humidity emission. Furthermore they decrease the stability and increase the height of the ABL and consequently facilitate entrainment of air and aerosol layers from the free troposphere.
In Chapter 1 of the dissertation, the role of social networks is analyzed as an important determinant in the search behavior of the unemployed. Based on the hypothesis that the unemployed generate information on vacancies through their social network, search theory predicts that individuals with large social networks should experience an increased productivity of informal search, and reduce their search in formal channels. Due to the higher productivity of search, unemployed with a larger network are also expected to have a higher reservation wage than unemployed with a small network. The model-theoretic predictions are tested and confirmed empirically. It is found that the search behavior of unemployed is significantly affected by the presence of social contacts, with larger networks implying a stronger substitution away from formal search channels towards informal channels. The substitution is particularly pronounced for passive formal search methods, i.e., search methods that generate rather non-specific types of job offer information at low relative cost. We also find small but significant positive effects of an increase of the network size on the reservation wage. These results have important implications on the analysis of the job search monitoring or counseling measures that are usually targeted at formal search only. Chapter 2 of the dissertation addresses the labor market effects of vacancy information during the early stages of unemployment. The outcomes considered are the speed of exit from unemployment, the effects on the quality of employment and the short-and medium-term effects on active labor market program (ALMP) participation. It is found that vacancy information significantly increases the speed of entry into employment; at the same time the probability to participate in ALMP is significantly reduced. Whereas the long-term reduction in the ALMP arises in consequence of the earlier exit from unemployment, we also observe a short-run decrease for some labor market groups which suggest that caseworker use high and low intensity activation measures interchangeably which is clearly questionable from an efficiency point of view. For unemployed who find a job through vacancy information we observe a small negative effect on the weekly number of hours worked. In Chapter 3, the long-term effects of participation in ALMP are assessed for unemployed youth under 25 years of age. Complementary to the analysis in Chapter 2, the effects of participation in time- and cost-intensive measures of active labor market policies are examined. In particular we study the effects of job creation schemes, wage subsidies, short-and long-term training measures and measures to promote the participation in vocational training. The outcome variables of interest are the probability to be in regular employment, and participation in further education during the 60 months following program entry. The analysis shows that all programs, except job creation schemes have positive and long-term effects on the employment probability of youth. In the short-run only short-term training measures generate positive effects, as long-term training programs and wage subsidies exhibit significant locking-in'' effects. Measures to promote vocational training are found to increase the probability of attending education and training significantly, whereas all other programs have either no or a negative effect on training participation. Effect heterogeneity with respect to the pre-treatment level education shows that young people with higher pre-treatment educational levels benefit more from participation most programs. However, for longer-term wage subsidies we also find strong positive effects for young people with low initial education levels. The relative benefit of training measures is higher in West than in East Germany. In the evaluation studies of Chapters 2 and 3 semi-parametric balancing methods of Propensity Score Matching (PSM) and Inverse Probability Weighting (IPW) are used to eliminate the effects of counfounding factors that influence both the treatment participation as well as the outcome variable of interest, and to establish a causal relation between program participation and outcome differences. While PSM and IPW are intuitive and methodologically attractive as they do not require parametric assumptions, the practical implementation may become quite challenging due to their sensitivity to various data features. Given the importance of these methods in the evaluation literature, and the vast number of recent methodological contributions in this field, Chapter 4 aims to reduce the knowledge gap between the methodological and applied literature by summarizing new findings of the empirical and statistical literature and practical guidelines for future applied research. In contrast to previous publications this study does not only focus on the estimation of causal effects, but stresses that the balancing challenge can and should be discussed independent of question of causal identification of treatment effects on most empirical applications. Following a brief outline of the practical implementation steps required for PSM and IPW, these steps are presented in detail chronologically, outlining practical advice for each step. Subsequently, the topics of effect estimation, inference, sensitivity analysis and the combination with parametric estimation methods are discussed. Finally, new extensions of the methodology and avenues for future research are presented.