Refine
Year of publication
Document Type
- Article (95)
- Postprint (19)
- Habilitation Thesis (1)
Keywords
- Fluorescence (6)
- Europium (3)
- lanthanides (3)
- resonance energy transfer (3)
- Absorption (2)
- Anisotropy (2)
- DBD dye (2)
- DR-UV-Vis (2)
- FRET (2)
- Huminstoffe (2)
Institute
Tuning of the excited-state properties and photovoltaic performance in PPV-based polymer blends
(2008)
Transparent, ion-conducting, luminescent, and flexible ionogels based on the room temperature ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl) imide [Bmim][N(Tf)(2)], a PtEu2 chromophore, and poly(methylmethacrylate) (PMMA) have been prepared. The thermal stability of the PMMA significantly increases with IL incorporation. In particular, the onset weight loss observed at ca. 229 degrees C for pure PMMA increases to 305 degrees C with IL addition. The ionogel has a high ionic conductivity of 10(-3) S cm(-1) at 373 K and exhibits a strong emission in the red with a long average luminescence decay time of tau = 890 mu s. The resulting material is a new type of soft hybrid material featuring useful thermal, optical, and ion transport properties.
The synthesis and photophysical properties of two new FRET pairs based on coumarin as a donor and DBD dye as an acceptor are described. The introduction of a bromo atom dramatically increases the two-photon excitation (2PE) cross section providing a 2PE-FRET system, which is also suitable for 2PE-FLIM.
The synthesis and photophysical properties of two new FRET pairs based on coumarin as a donor and DBD dye as an acceptor are described. The introduction of a bromo atom dramatically increases the two-photon excitation (2PE) cross section providing a 2PE-FRET system, which is also suitable for 2PE-FLIM.
Synthetic routes to different oligospirothioketal (OSTK) Forster resonance energy transfer (FRET) constructs are described and the photophysics of these constructs were explored in different solvents. The FRET efficiencies were determined from the experimental data and compared with theoretical values. The influence of the outstanding rigidity of the novel OSTK compounds on the FRET is discussed.
Europium ions were introduced in SiO2 and MCM-41 via two different pathways: (1) grafting the europium complexes with two alkoxide structures, 3-(2-imidazolin-1-yl)-propyl-triethoxysilane (IPTES) and aminopropyltrimethoxysilane (APTMS), and (2) functionalization of the SiO2 support with silicon 4- carboxylbutyltriethoxide followed by subsequent addition of the europium ions. The new materials were characterized using nitrogen adsorption isotherms at -196 degrees C, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, Fourier transform infrared, NMR, DR-UV-vis, steady-state emission and excitation, and time-resolved photoluminescence spectroscopy. Spectral changes found in the time-resolved photoluminscence spectra strongly point to the distribution of europium ions on a range of environments in both SiO2 and MCM-41 supports. The average europium photoluminescence lifetimes decrease within the order: Eu3+-IPTES/SiO2 (550 mu s) > Eu3+-APTMS/SiO2 (425 mu s) > Eu3+-APTMS/MCM-41 (370 mu s) > Eu3+-IPTES/MCM-41 (320 mu s) > Eu3+-CABES/SiO2 (240 mu s). The photoluminescence quantum efficiency has the largest value, of 22%, for Eu3+-IPTES/SiO2, while the most reduced value, of 9%, was measured for Eu3+-CABES/SiO2.
Two different types of mesoporous silicon-phosphate supports using different surfactants (a mixture of (CH3)(3)C13H27NBr with an organophosphorus coupling molecule (HO-PO(i-C3H7)(2)) and with a co-surfactant ((C2H5)(3)(C6H5)PCl), respectively) were synthesized. Trivalent europium (Eu) ions were immobilized via ion-exchange on these supports. The resulting materials were characterized using nitrogen adsorption isotherms at -196 degrees C, thermogravimetric analysis, SEM, TEM, FT-IR, PXRD, CP/MAS. (HSi)-H-1-Si-29 and P-31 NMR, DR-UV-vis as well as steady- state and time-resolved photoluminescence spectroscopy. The results evidenced that the co-polymerization of silicon and phosphorous yielded a unique morphology in these materials. Following calcination at 450 and 900 degrees C europium- exchanged silicon-phosphates with great surface area (BET=600-705 m(2) g(-1)) and 3.4 nm sized mesopores were obtained. The differences among the optical properties of the non-calcined europium materials such as the emission lifetimes, local environment at the europium sites or the relative contribution of the upper excited levels to the total photoluminescence were assigned to the surfactants used in the synthesis. Calcination of the silicon-phosphates at higher temperatures than 450 degrees C did not induce major changes in the structural properties: in contrast, photoluminescence properties of europium were markedly improved in terms of intensity and average lifetime.
Zeolites NaY and ZSM-5 were used as hosts for styrene polymerization after ion-exchange with europium ions. The parent and hybrid, polystyrene coated Eu-NaY (Eu-NaY/PS) and Eu-ZSM-5 (Eu-ZSM-5/PS) zeolites were investigated by using thermal analysis, SEM, PXRD, FT-IR, DR-UV/Vis, steady state and time-resolved photoluminescence spectroscopy. FT-IR spectra evidenced for the interaction between the zeolitic hosts and polystyrene while the PXRD spectra supported for the presence of the polymer inside the channels/pores of Eu-NaY/PS and Eu-ZSM-5/PS materials. The optical properties of Eu-NaY/PS and Eu-ZSM-5/PS were significantly changed relative to those of the parent zeolites, giving further evidence for the presence of polymer inside zeolites. An interesting case is presented by NaY zeolite: following styrene polymerization, the polymer interacted selectively with one of the two main species co-existing inside zeolite while for ZSM-5 a similar effect was not observed.
Terbium-exchanged ZSM-5, MOR and (H)BEA zeolites were silylated with phenyl-, vinyl- and hexadecyl trimethoxysilanes via a post-synthesis grafting. All samples were investigated by means of PXRD, FT-IR, TGA, physical adsorption, DR-UV-Vis and time-resolved photoluminescence spectroscopy. From the comparison of the photoluminescence decays of terbium-exchanged in parent (non-silylated) and silylated zeolites, it resulted that the silylation efficiency of the various alkoxysilanes is determined by the type of zeolite and follows the sequences: phenyl > vinyl > hexadecyl > parent for ZSM-5, hexadecyl a parts per thousand phenyl a parts per thousand vinyl > parent for MOR and hexadecyl > phenyl a parts per thousand vinyl > a parts per thousand parent for BEA zeolites, respectively.
Species-related luminescence-structure relationships in europium-exchanged mesoporous material
(2009)
Europium exchanged into a mesoporous material (Zeotile-1) was extensively characterized with respect to the Si/ Al ratio and surface silylation by using time-resolved emission spectroscopy. Qualitative as well as quantitative details of the europium species-related luminescence-structure relationships were obtained and discussed such as the decay associated spectra, local distortion and structure of the bonding environment, crystal-field strength, radiative relaxation rates, and the quantum efficiency. Thus, two europium species were found in the parent as well as in the silylated materials: one species located on the internal surface and the second inside the 2-2.5 nm pores. The species located on the internal surface is characterized by photoluminescence decay times of 105 mu s <tau < 125 mu s, an asymmetry value R of 0.6 < R < 0.8, and a quantum efficiency of 2%-2.5%. Upon silylation, the photoluminescence decay times, the asymmetry values, and the quantum efficiency were increased to 160 mu s <tau < 180 mu s, 1.7 < R < 2.1, and similar to 4%, respectively. Following silylation, the number of water molecules is reduced in the first coordination shell of the europium species located on the internal surface from eight to nine to about five. On the other hand, the europium species located inside the pores showed a much longer photoluminescence decay time (460 mu s <tau < 560 mu s) and a much higher asymmetry ratio (5 < R < 6.5). The related photoluminescence efficiency was 26%-30%. An average of one up to two water molecules in the first coordination shell of the europium species located inside the pores was estimated for both parent and silylated materials.
A series of terbium- and europium-exchanged microporous-mesoporous zeolite Socony Mobil Five (MFI)-type materials such as Zeotile-1 and Zeogrid with varying Si/Al ratios was investigated using FTIR, PXRD, adsorption- desorption isotherms of N-2 at 77 K and time-resolved luminescence spectroscopy. Silylation of the lanthanides-exchanged Zeotile-1 and Zeogrid with hexadecyl trimethoxysilanes via post-synthesis grafting was also studied. The results showed that the lanthanide's photoluminescence spectra and decays were modified due to silylation. The different silylation effects in Zeotile-1 and Zeogrid were correlated with the textural properties of the investigated materials. (C) 2007 Elsevier B.V. All rights reserved.
Time-resolved photoluminescence analysis of distribution and migration of terbium ions in zeolites X
(2004)
The photoluminescence (PL) dynamics of terbium-exchanged zeolites X was investigated upon laser excitation at 355 nm. The results evidenced the presence of at least two terbium main environments with PL lifetimes varying between 391-411 and 753-770 mus. The two-site nature of terbium distribution in zeolites X permitted a quantitative analysis of the migration process of terbium ions inside the pores and cavities upon dehydration in air at 200 degreesC. Besides the increase of the PL lifetimes with about 30% and 80% compared to those of the hydrated zeolite, a fraction of almost 30% of terbium ions was estimated to migrate from the supercages to the neighboring sodalites or hexagonal prisms. Our results evidenced for the first time the capability of time-resolved luminescence spectroscopy in quantitatively tracking for the intrazeolitic migration of lanthanides. (C) 2004 Elsevier B.V. All rights reserved
The well-known cationic surfactant hexadecyltrimethylammonium bromide (CTAB) was used as a model carrier to study drug-carrier interactions with fluorescence probes (5-hexadecanoylaminofluorescein (HAF) and 2,10-bis-(3-aminopropyloxy)dibenzo[aj]perylene-8,16-dione (NIR 628) by applying ensemble as well as single molecule fluorescence techniques. The impact of the probes on the micelle parameters (critical micelle concentration, average aggregation number, hydrodynamic radius) was investigated under physiological conditions. In the presence of additional electrolytes, such as buffer, the critical micelle concentration decreased by a factor of about 10. In contrast, no influence of the probes on the critical micelle concentration and on average aggregation number was observed. The results show that HAF does not affect the characteristics of CTAB micelles. Analyzing fluorescence correlation spectroscopy data and time-resolved anisotropy decays in terms of the "two-step" in combination with the "wobbling-in-cone" model, it was proven that HAF and NIR 628 are differently associated with the micelles. Based on ensemble and single molecule fluorescence experiments, intra- and intermicellar energy transfer process between the two dyes were probed and characterized.
Fluorescence probes consisting of well-established fluorophores in combination with rigid molecular rods based on spirane-type structures were investigated with respect to their fluorescence properties under different solvent conditions. The attachment of the dyes was accomplished by 1,3-dipolar cycloaddition between alkynes and azides (click' reaction) and is a prime example for a novel class of sensor constructs. Especially, the attachment of two (different) fluorophores on opposite sides of the molecular rods paves the way to new sensor systems with less bulky (compared to the conventional DNA- or protein-based concepts), nevertheless rigid spacer constructs, e.g., for FRET-based sensing applications. A detailed photophysical characterization was performed in MeOH (and in basic H2O/MeOH mixtures) for i) rod constructs containing carboxyfluorescein, ii) rod constructs containing carboxyrhodamine, iii) rod constructs containing both carboxyfluorescein and carboxyrhodamine, and iv) rod constructs containing both pyrene and perylene parts. For each dye (pair), two rod lengths with different numbers of spirane units were synthesized and investigated. The rod constructs were characterized in ensemble as well as single-molecule fluorescence experiments with respect to i) specific roddye and ii) dyedye interactions. In addition to MeOH and MeOH/NaOH, the rod constructs were also investigated in micellar systems, which were chosen as a simplified model for membranes.
This article gives an overview of the current status of knowledge concerning the role of nanoparticles (inorganic and organic) in deep geological host rocks and the potential influence of these nanoparticles on radionuclide migration in far-field systems. The manuscript is not intended to be a full review paper or overview paper concerning nanoparticles, here the intention is to refer to recent publications but to highlight the progress made in the 6th framework project IP FUNMIG (Fundamental processes of radionuclide migration) and the open literature over the past 5 a concerning the process understanding of nanoparticle related issues in the three host rock formations investigated, namely: claystones, crystalline rocks and salt rock overburden. The results show inter alia that the inorganic nanoparticle concentration in deep groundwaters of advection dominated systems rarely exceeds 1 mg L (1) and is expected to be in the ng L (1) range in diffusion controlled systems. For organic nanoparticles DOC concentrations up to tens of milligrams in diffusion-controlled indurated clays with molecular sizes mostly <500 Da have been found. Fulvic acid type organics have been identified in crystalline environments and plastic Clay formations (Boom Clay) with molecular sizes <= 300 kDa. Additional sources of inorganic nanoparticles from the repository near-field (compacted bentonite) were identified and the initial erosion rates were determined. The results indicate under stagnant conditions similar to 38 mg cm (2) a (1) for bi-distilled water, similar to 20 mg cm (2) a (1) for glacial melt water (Grimsel groundwater) and very low rates similar to 0.02 mg cm (2) a (1) for 5 mM CaCl2 contact water. The low critical coagulation concentration (CCC) indicative for purely diffusion controlled coagulation of 1 mM L (1) Ca2+ found in bentonite nanoparticle stability analysis matches the low nanoparticle mobilization from compacted bentonite found in these systems.
We report a 1,2,3-triazol fluoroionophore for detecting Na+ that shows in vitro enhancement in the Na+-induced fluorescence intensity and decay time. The Na+-selective molecule 1 was incorporated into a hydrogel as a part of a fiber optical sensor. This sensor allows the direct determination of Na+ in the range of 1–10 mM by measuring reversible fluorescence decay time changes.