Refine
Year of publication
- 2022 (215) (remove)
Document Type
- Article (144)
- Doctoral Thesis (43)
- Postprint (23)
- Review (2)
- Habilitation Thesis (1)
- Master's Thesis (1)
- Other (1)
Is part of the Bibliography
- yes (215)
Keywords
- functional traits (7)
- Arabidopsis thaliana (5)
- animal personality (5)
- light pollution (5)
- GPS (4)
- coexistence (4)
- fence ecology (4)
- giving-up density (4)
- ungulate (4)
- veterinary cordon fence (4)
Institute
- Institut für Biochemie und Biologie (215) (remove)
Next-generation sequencing methods provide comprehensive data for the analysis of structural and functional analysis of the genome. The draft genomes with low contig number and high N50 value can give insight into the structure of the genome as well as provide information on the annotation of the genome. In this study, we designed a pipeline that can be used to assemble prokaryotic draft genomes with low number of contigs and high N50 value. We aimed to use combination of two de novo assembly tools (SPAdes and IDBA-Hybrid) and evaluate the impact of this approach on the quality metrics of the assemblies. The followed pipeline was tested with the raw sequence data with short reads (< 300) for a total of 10 species from four different genera. To obtain the final draft genomes, we firstly assembled the sequences using SPAdes to find closely related organism using the extracted 16 s rRNA from it. IDBA-Hybrid assembler was used to obtain the second assembly data using the closely related organism genome. SPAdes assembler tool was implemented using the second assembly, produced by IDBA-hybrid as a hint. The results were evaluated using QUAST and BUSCO. The pipeline was successful for the reduction of the contig numbers and increasing the N50 statistical values in the draft genome assemblies while preserving the coverage of the draft genomes.
Models are useful tools for understanding and predicting ecological patterns and processes. Under ongoing climate and biodiversity change, they can greatly facilitate decision-making in conservation and restoration and help designing adequate management strategies for an uncertain future. Here, we review the use of spatially explicit models for decision support and to identify key gaps in current modelling in conservation and restoration. Of 650 reviewed publications, 217 publications had a clear management application and were included in our quantitative analyses. Overall, modelling studies were biased towards static models (79%), towards the species and population level (80%) and towards conservation (rather than restoration) applications (71%). Correlative niche models were the most widely used model type. Dynamic models as well as the gene-to-individual level and the community-to-ecosystem level were underrepresented, and explicit cost optimisation approaches were only used in 10% of the studies. We present a new model typology for selecting models for animal conservation and restoration, characterising model types according to organisational levels, biological processes of interest and desired management applications. This typology will help to more closely link models to management goals. Additionally, future efforts need to overcome important challenges related to data integration, model integration and decision-making. We conclude with five key recommendations, suggesting that wider usage of spatially explicit models for decision support can be achieved by 1) developing a toolbox with multiple, easier-to-use methods, 2) improving calibration and validation of dynamic modelling approaches and 3) developing best-practise guidelines for applying these models. Further, more robust decision-making can be achieved by 4) combining multiple modelling approaches to assess uncertainty, and 5) placing models at the core of adaptive management. These efforts must be accompanied by long-term funding for modelling and monitoring, and improved communication between research and practise to ensure optimal conservation and restoration outcomes.
Das Ziel des hier beschriebenen Masterprojekts war es, eine Methode zu etablieren, mit der Insekten in Gießharz eingeschlossen werden können, damit sie dauerhaft konserviert für mikroskopische Untersuchungen im Biologieunterricht zur Verfügung stehen. Die Masterarbeit enthält eine ausführliche Anleitung zur Herstellung von Gießharzpräparaten mit darin eingebetteten Insekten. Sie soll als Handreichung vor allem für Biologie-Lehrkräfte dienen, um selbstständig hochwertige Lehrpräparate für ihren Unterricht herstellen zu können. Aufgrund der Komplexität des Themas werden Naturschutzbestimmungen und die Beschaffung der Insekten genauso beleuchtet wie deren anschließende Präparation, die Konstruktion einer eigenen Gießform, die Einbettung der Insekten in Gießharz und die Nachbehandlung des Gießlings. Wichtige Einflussfaktoren, die die Qualität der Präparate entscheidend beeinflussen und mögliche Fehlerquellen, werden ausführlich erläutert. Mittels dieser detaillierten Eingießanleitung können mit relativ einfachen und kostengünstigen Mitteln faszinierende Studienobjekte für einen anschaulichen Biologieunterricht entstehen.
Biofilms are complex living materials that form as bacteria get embedded in a matrix of self-produced protein and polysaccharide fibres. The formation of a network of extracellular biopolymer fibres contributes to the cohesion of the biofilm by promoting cell-cell attachment and by mediating biofilm-substrate interactions. This sessile mode of bacteria growth has been well studied by microbiologists to prevent the detrimental effects of biofilms in medical and industrial settings. Indeed, biofilms are associated with increased antibiotic resistance in bacterial infections, and they can also cause clogging of pipelines or promote bio-corrosion. However, biofilms also gained interest from biophysics due to their ability to form complex morphological patterns during growth. Recently, the emerging field of engineered living materials investigates biofilm mechanical properties at multiple length scales and leverages the tools of synthetic biology to tune the functions of their constitutive biopolymers.
This doctoral thesis aims at clarifying how the morphogenesis of Escherichia coli (E. coli) biofilms is influenced by their growth dynamics and mechanical properties. To address this question, I used methods from cell mechanics and materials science. I first studied how biological activity in biofilms gives rise to non-uniform growth patterns. In a second study, I investigated how E. coli biofilm morphogenesis and its mechanical properties adapt to an environmental stimulus, namely the water content of their substrate. Finally, I estimated how the mechanical properties of E. coli biofilms are altered when the bacteria express different extracellular biopolymers.
On nutritive hydrogels, micron-sized E. coli cells can build centimetre-large biofilms. During this process, bacterial proliferation and matrix production introduce mechanical stresses in the biofilm, which release through the formation of macroscopic wrinkles and delaminated buckles. To relate these biological and mechanical phenomena, I used time-lapse fluorescence imaging to track cell and matrix surface densities through the early and late stages of E. coli biofilm growth. Colocalization of high cell and matrix densities at the periphery precede the onset of mechanical instabilities at this annular region. Early growth is detected at this outer annulus, which was analysed by adding fluorescent microspheres to the bacterial inoculum. But only when high rates of matrix production are present in the biofilm centre, does overall biofilm spreading initiate along the solid-air interface. By tracking larger fluorescent particles for a long time, I could distinguish several kinematic stages of E. coli biofilm expansion and observed a transition from non-linear to linear velocity profiles, which precedes the emergence of wrinkles at the biofilm periphery. Decomposing particle velocities to their radial and circumferential components revealed a last kinematic stage, where biofilm movement is mostly directed towards the radial delaminated buckles, which verticalize. The resulting compressive strains computed in these regions were observed to substantially deform the underlying agar substrates. The co-localization of higher cell and matrix densities towards an annular region and the succession of several kinematic stages are thus expected to promote the emergence of mechanical instabilities at the biofilm periphery. These experimental findings are predicted to advance future modelling approaches of biofilm morphogenesis.
E. coli biofilm morphogenesis is further anticipated to depend on external stimuli from the environment. To clarify how the water could be used to tune biofilm material properties, we quantified E. coli biofilm growth, wrinkling dynamics and rigidity as a function of the water content of the nutritive substrates. Time-lapse microscopy and computational image analysis revealed that substrates with high water content promote biofilm spreading kinetics, while substrates with low water content promote biofilm wrinkling. The wrinkles observed on biofilm cross-sections appeared more bent on substrates with high water content, while they tended to be more vertical on substrates with low water content. Both wet and dry biomass, accumulated over 4 days of culture, were larger in biofilms cultured on substrates with high water content, despite extra porosity within the matrix layer. Finally, the micro-indentation analysis revealed that substrates with low water content supported the formation of stiffer biofilms. This study shows that E. coli biofilms respond to the water content of their substrate, which might be used for tuning their material properties in view of further applications.
Biofilm material properties further depend on the composition and structure of the matrix of extracellular proteins and polysaccharides. In particular, E. coli biofilms were suggested to present tissue-like elasticity due to a dense fibre network consisting of amyloid curli and phosphoethanolamine-modified cellulose. To understand the contribution of these components to the emergent mechanical properties of E. coli biofilms, we performed micro-indentation on biofilms grown from bacteria of several strains. Besides showing higher dry masses, larger spreading diameters and slightly reduced water contents, biofilms expressing both main matrix components also presented high rigidities in the range of several hundred kPa, similar to biofilms containing only curli fibres. In contrast, a lack of amyloid curli fibres provides much higher adhesive energies and more viscoelastic fluid-like material behaviour. Therefore, the combination of amyloid curli and phosphoethanolamine-modified cellulose fibres implies the formation of a composite material whereby the amyloid curli fibres provide rigidity to E. coli biofilms, whereas the phosphoethanolamine-modified cellulose rather acts as a glue. These findings motivate further studies involving purified versions of these protein and polysaccharide components to better understand how their interactions benefit biofilm functions.
All three studies depict different aspects of biofilm morphogenesis, which are interrelated. The first work reveals the correlation between non-uniform biological activities and the emergence of mechanical instabilities in the biofilm. The second work acknowledges the adaptive nature of E. coli biofilm morphogenesis and its mechanical properties to an environmental stimulus, namely water. Finally, the last study reveals the complementary role of the individual matrix components in the formation of a stable biofilm material, which not only forms complex morphologies but also functions as a protective shield for the bacteria it contains. Our experimental findings on E. coli biofilm morphogenesis and their mechanical properties can have further implications for fundamental and applied biofilm research fields.
Collagen-based biomaterials with oriented fibrils have shown great application potential in medicine. However, it is still challenging to control the type I collagen fibrillogenesis in ultrathin films. Here, we report an approach to produce cohesive and well-organized type I collagen ultrathin films of about 10 nm thickness using the Langmuir-Blodgett technique. Ellipsometry, rheology, and Brewster angle microscopy are applied to investigate in situ how the molecules behave at the air-water interface, both at room temperature and 37 degrees C. The interfacial storage modulus observed at room temperature vanishes upon heating, indicating the existence and disappearance of the network structure in the protein nanosheet. The films were spanning over holes as large as 1 mm diameter when transferred at room temperature, proving the strong cohesive interactions. A highly aligned and fibrillar structure was observed by atomic force microscopy (AFM) and optical microscopy.
Biodegradation of polyester polyurethane by the marine fungus Cladosporium halotolerans 6UPA1
(2022)
Lack of degradability and the accumulation of polymeric wastes increase the risk for the health of the environment. Recently, recycling of polymeric waste materials becomes increasingly important as raw materials for polymer synthesis are in short supply due to the rise in price and supply chain disruptions. As an important polymer, polyurethane (PU) is widely used in modern life, therefore, PU biodegradation is desirable to avoid its accumulation in the environment. In this study, we isolated a fungal strain Cladosporium halotolerans from the deep sea which can grow in mineral medium with a polyester PU (Impranil DLN) as a sole carbon source. Further, we demonstrate that it can degrade up to 80% of Impranil PU after 3 days of incubation at 28 celcius by breaking the carbonyl groups (1732 cm(-1)) and C-N-H bonds (1532 cm(-1) and 1247 cm(-1)) as confirmed by Fourier-transform infrared (FTIR) spectroscopy analysis. Gas chromatography-mass spectrometry (GC-MS) analysis revealed polyols and alkanes as PU degradation intermediates, indicating the hydrolysis of ester and urethane bonds. Esterase and urease activities were detected in 7 days-old cultures with PU as a carbon source. Transcriptome analysis showed a number of extracellular protein genes coding for enzymes such as cutinase, lipase, peroxidase and hydrophobic surface binding proteins A (HsbA) were expressed when cultivated on Impranil PU. The yeast two-hybrid assay revealed that the hydrophobic surface binding protein ChHsbA1 directly interacts with inducible esterases, ChLip1 (lipase) and ChCut1 (cutinase). Further, the KEGG pathway for "fatty acid degradation " was significantly enriched in Impranil PU inducible genes, indicating that the fungus may use the degradation intermediates to generate energy via this pathway. Taken together, our data indicates secretion of both esterase and hydrophobic surface binding proteins by C. halotolerans plays an important role in Impranil PU absorption and subsequent degradation. Our study provides a mechanistic insight into Impranil PU biodegradation by deep sea fungi and provides the basis for future development of biotechnological PU recycling.
Background: In the animal kingdom body size is often linked to dominance and subsequently the standing in social hierarchy. Similarly, human growth has been associated and linked to socioeconomic factors, including one’s social status. This has already been proposed in the early 1900s where data on young German school girls from different social strata have been compared.
Objectives: This paper aims to summarize and analyze these results and make them accessible for non-German speakers. The full English translation of the historic work of Dikanski (Dikanski, 1914) is available as a supplement. Further, this work aims to compare the historical data with modern references, to test three hypotheses: (1) higher social class is positively associated with body height and weight, (2) affluent people from the used historical data match modern references in weight and height and (3) weight distributions are skewed in both modern and historical populations.
Methods: Comparison of historical data from 1914 with WHO and 1980s German data. The data sets, for both body weight and height for 6.0- and 7.0-year-old girls, were fitted onto centile curves and quantile correlation coefficients were calculated.
Results: In historical data social status is positively associated with body height and weight while both are also normally distributed, which marks a significant difference to modern references.
Conclusion: Social status is positively associated with height, signaling social dominance, making children of affluent classes taller. Children from the historical data do not reach the average height of modern children, even under the best environmental conditions. The children of the upper social class were not skewed in weight distribution, although they had the means to become as obese as modern children.
Plant metabolism is the main process of converting assimilated carbon to different crucial compounds for plant growth and therefore crop yield, which makes it an important research topic. Although major advances in understanding genetic principles contributing to metabolism and yield have been made, little is known about the genetics responsible for trait variation or canalization although the concepts have been known for a long time. In light of a growing global population and progressing climate change, understanding canalization of metabolism and yield seems ever-more important to ensure food security. Our group has recently found canalization metabolite quantitative trait loci (cmQTL) for tomato fruit metabolism, showing that the concept of canalization applies on metabolism. In this work two approaches to investigate plant metabolic canalization and one approach to investigate yield canalization are presented.
In the first project, primary and secondary metabolic data from Arabidopsis thaliana and Phaseolus vulgaris leaf material, obtained from plants grown under different conditions was used to calculate cross-environment coefficient of variations or fold-changes of metabolite levels per genotype and used as input for genome wide association studies. While primary metabolites have lower CV across conditions and show few and mostly weak associations to genomic regions, secondary metabolites have higher CV and show more, strong metabolite to genome associations. As candidate genes, both potential regulatory genes as well as metabolic genes, can be found, albeit most metabolic genes are rarely directly related to the target metabolites, suggesting a role for both potential regulatory mechanisms as well as metabolic network structure for canalization of metabolism.
In the second project, candidate genes of the Solanum lycopersicum cmQTL mapping are selected and CRISPR/Cas9-mediated gene-edited tomato lines are created, to validate the genes role in canalization of metabolism. Obtained mutants appeared to either have strong aberrant developmental phenotypes or appear wild type-like. One phenotypically inconspicuous mutant of a pantothenate kinase, selected as candidate for malic acid canalization shows a significant increase of CV across different watering conditions. Another such mutant of a protein putatively involved in amino acid transport, selected as candidate for phenylalanine canalization shows a similar tendency to increased CV without statistical significance. This potential role of two genes involved in metabolism supports the hypothesis of structural relevance of metabolism for its own stability.
In the third project, a mutant for a putative disulfide isomerase, important for thylakoid biogenesis, is characterized by a multi-omics approach. The mutant was characterized previously in a yield stability screening and showed a variegated leaf phenotype, ranging from green leaves with wild type levels of chlorophyll over differently patterned variegated to completely white leaves almost completely devoid of photosynthetic pigments. White mutant leaves show wild type transcript levels of photosystem assembly factors, with the exception of ELIP and DEG orthologs indicating a stagnation at an etioplast to chloroplast transition state. Green mutant leaves show an upregulation of these assembly factors, possibly acting as overcompensation for partially defective disulfide isomerase, which seems sufficient for proper chloroplast development as confirmed by a wild type-like proteome. Likely as a result of this phenotype, a general stress response, a shift to a sink-like tissue and abnormal thylakoid membranes, strongly alter the metabolic profile of white mutant leaves. As the severity and pattern of variegation varies from plant to plant and may be effected by external factors, the effect on yield instability, may be a cause of a decanalized ability to fully exploit the whole leaf surface area for photosynthetic activity.
Trade-off for survival
(2022)
The environmental micmbiota is increasingly exposed to chemical pollution. While the emergence of multi-resistant pathogens is recognized as a global challenge, our understanding of antimicrobial resistance (AMR) development from native microbiomes and the risks associated with chemical exposure is limited. By implementing a lichen as a bioindicator organism and model for a native microbiome, we systematically examined responses towards antimicrobials (colistin, tetracycline, glyphosate, and alkylpyrazine). Despite an unexpectedly high resilience, we identified potential evolutionary consequences of chemical exposure in terms of composition and functioning of native bacterial communities. Major shifts in bacterial composition were observed due to replacement of naturally abundant taxa; e.g. Chthoniobacterales by Pseudomonadales. A general response, which comprised activation of intrinsic resistance and parallel reduction of metabolic activity at RNA and protein levels was deciphered by a multi-omics approach. Targeted analyses of key taxa based on metagenome-assembled genomes reflected these responses but also revealed diversified strategies of their players. Chemical-specific responses were also observed, e.g., glyphosate enriched bacterial r-strategists and activated distinct ARGs. Our work demonstrates that the high resilience of the native micmbiota toward antimicrobial exposure is not only explained by the presence of antibiotic resistance genes but also adapted metabolic activity as a trade-off for survival. Moreover, our results highlight the importance of native microbiomes as important but so far neglected AMR reservoirs. We expect that this phenomenon is representative for a wide range of environmental microbiota exposed to chemicals that potentially contribute to the emergence of antibiotic-resistant bacteria from natural environments.
First Steps towards the development of epigenetic biomarkers in female cheetahs (Acinonyx jubatus)
(2022)
Free-ranging cheetahs (Acinonyx jubatus) are generally healthy, whereas cheetahs under human care, such as those in zoological gardens, suffer from ill-defined infectious and degenerative pathologies. These differences are only partially explained by husbandry management programs because both groups share low genetic diversity. However, mounting evidence suggests that physiological differences between populations in different environments can be tracked down to differences in epigenetic signatures. Here, we identified differentially methylated regions (DMRs) between free-ranging cheetahs and conspecifics in zoological gardens and prospect putative links to pathways relevant to immunity, energy balance and homeostasis. Comparing epigenomic DNA methylation profiles obtained from peripheral blood mononuclear cells (PBMCs) from eight free-ranging female cheetahs from Namibia and seven female cheetahs living in zoological gardens within Europe, we identified DMRs of which 22 were hypermethylated and 23 hypomethylated. Hypermethylated regions in cheetahs under human care were located in the promoter region of a gene involved in host-pathogen interactions (KLC1) and in an intron of a transcription factor relevant for the development of pancreatic beta-cells, liver, and kidney (GLIS3). The most canonical mechanism of DNA methylation in promoter regions is assumed to repress gene transcription. Taken together, this could indicate that hypermethylation at the promoter region of KLC1 is involved in the reduced immunity in cheetahs under human care. This approach can be generalized to characterize DNA methylation profiles in larger cheetah populations under human care with a more granular longitudinal data collection, which, in the future, could be used to monitor the early onset of pathologies, and ultimately translate into the development of biomarkers with prophylactic and/or therapeutic potential.
Die Professionsorientierung der Lehramtsstudiengänge ist ein zentrales Anliegen der universitären Potsdamer Lehrkräftebildung. Seit 1999 finden Evaluationen zur Professionsorientierung statt, die Diskrepanzen zwischen der gewünschten und der erfahrenen Professionsorientierung durch die Studierenden aufzeigen. Im Wintersemester 2013/14 wurden neue Studiengänge an der Universität Potsdam eingeführt. Inwieweit damit auch eine stärkere Professionsorientierung und ein stärkerer Berufsbezug erfolgt ist, ist bislang ungeklärt. In einer Onlinebefragung im Dezember 2018 wurden Studierende der Lehramtsstudiengänge der Universität Potsdam gebeten, die inhaltliche Gestaltung der Lehramtsstudiengänge sowie die Professionsorientierung der Praxisphasen, die Betreuung und Beratung im Rahmen der Praktika, den Nutzen der Praktika für Studium und Beruf und ihre Lehrer:innenkompetenz einzuschätzen. Der Beitrag stellt erste empirische Analysen dar und diskutiert Anregungen zur Weiterentwicklung der Studiengänge mit Bezug auf die Praxisstudien.
COMMIT
(2022)
Composition and functions of microbial communities affect important traits in diverse hosts, from crops to humans. Yet, mechanistic understanding of how metabolism of individual microbes is affected by the community composition and metabolite leakage is lacking. Here, we first show that the consensus of automatically generated metabolic reconstructions improves the quality of the draft reconstructions, measured by comparison to reference models. We then devise an approach for gap filling, termed COMMIT, that considers metabolites for secretion based on their permeability and the composition of the community. By applying COMMIT with two soil communities from the Arabidopsis thaliana culture collection, we could significantly reduce the gap-filling solution in comparison to filling gaps in individual reconstructions without affecting the genomic support. Inspection of the metabolic interactions in the soil communities allows us to identify microbes with community roles of helpers and beneficiaries. Therefore, COMMIT offers a versatile fully automated solution for large-scale modelling of microbial communities for diverse biotechnological applications. <br /> Author summaryMicrobial communities are important in ecology, human health, and crop productivity. However, detailed information on the interactions within natural microbial communities is hampered by the community size, lack of detailed information on the biochemistry of single organisms, and the complexity of interactions between community members. Metabolic models are comprised of biochemical reaction networks based on the genome annotation, and can provide mechanistic insights into community functions. Previous analyses of microbial community models have been performed with high-quality reference models or models generated using a single reconstruction pipeline. However, these models do not contain information on the composition of the community that determines the metabolites exchanged between the community members. In addition, the quality of metabolic models is affected by the reconstruction approach used, with direct consequences on the inferred interactions between community members. Here, we use fully automated consensus reconstructions from four approaches to arrive at functional models with improved genomic support while considering the community composition. We applied our pipeline to two soil communities from the Arabidopsis thaliana culture collection, providing only genome sequences. Finally, we show that the obtained models have 90% genomic support and demonstrate that the derived interactions are corroborated by independent computational predictions.
The NAC transcription factor (TF) JUNGBRUNNEN1 (JUB1) is an important negative regulator of plant senescence, as well as of gibberellic acid (GA) and brassinosteroid (BR) biosynthesis in Arabidopsis thaliana. Overexpression of JUB1 promotes longevity and enhances tolerance to drought and other abiotic stresses. A similar role of JUB1 has been observed in other plant species, including tomato and banana. Our data show that JUB1 overexpressors (JUB1-OXs) accumulate higher levels of proline than WT plants under control conditions, during the onset of drought stress, and thereafter. We identified that overexpression of JUB1 induces key proline biosynthesis and suppresses key proline degradation genes. Furthermore, bZIP63, the transcription factor involved in proline metabolism, was identified as a novel downstream target of JUB1 by Yeast One-Hybrid (Y1H) analysis and Chromatin immunoprecipitation (ChIP). However, based on Electrophoretic Mobility Shift Assay (EMSA), direct binding of JUB1 to bZIP63 could not be confirmed. Our data indicate that JUB1-OX plants exhibit reduced stomatal conductance under control conditions. However, selective overexpression of JUB1 in guard cells did not improve drought stress tolerance in Arabidopsis. Moreover, the drought-tolerant phenotype of JUB1 overexpressors does not solely depend on the transcriptional control of the DREB2A gene. Thus, our data suggest that JUB1 confers tolerance to drought stress by regulating multiple components. Until today, none of the previous studies on JUB1´s regulatory network focused on identifying protein-protein interactions. We, therefore, performed a yeast two-hybrid screen (Y2H) which identified several protein interactors of JUB1, two of which are the calcium-binding proteins CaM1 and CaM4. Both proteins interact with JUB1 in the nucleus of Arabidopsis protoplasts. Moreover, JUB1 is expressed with CaM1 and CaM4 under the same conditions. Since CaM1.1 and CaM4.1 encode proteins with identical amino acid sequences, all further experiments were performed with constructs involving the CaM4 coding sequence. Our data show that JUB1 harbors multiple CaM-binding sites, which are localized in both the N-terminal and C-terminal regions of the protein. One of the CaM-binding sites, localized in the DNA-binding domain of JUB1, was identified as a functional CaM-binding site since its mutation strongly reduced the binding of CaM4 to JUB1. Furthermore, JUB1 transactivates expression of the stress-related gene DREB2A in mesophyll cells; this effect is significantly reduced when the calcium-binding protein CaM4 is expressed as well. Overexpression of both genes in Arabidopsis results in early senescence observed through lower chlorophyll content and an enhanced expression of senescence-associated genes (SAGs) when compared with single JUB1 overexpressors. Our data also show that JUB1 and CaM4 proteins interact in senescent leaves, which have increased Ca2+ levels when compared to young leaves. Collectively, our data indicate that JUB1 activity towards its downstream targets is fine-tuned by calcium-binding proteins during leaf senescence.
Extreme habitats often harbor specific communities that differ substantially from non-extreme habitats. In many cases, these communities are characterized by archaea, bacteria and protists, whereas the number of species of metazoa and higher plants is relatively low. In extremely acidic habitats, mostly prokaryotes and protists thrive, and only very few metazoa thrive, for example, rotifers. Since many studies have investigated the physiology and ecology of individual species, there is still a gap in research on direct, trophic interactions among extremophiles. To fill this gap, we experimentally studied the trophic interactions between a predatory protist (Actinophrys sol, Heliozoa) and its prey, the rotifers Elosa woralli and Cephalodella sp., the ciliate Urosomoida sp. and the mixotrophic protist Chlamydomonas acidophila (a green phytoflagellate, Chlorophyta). We found substantial predation pressure on all animal prey. High densities of Chlamydomonas acidophila reduced the predation impact on the rotifers by interfering with the feeding behaviour of A. sol. These trophic relations represent a natural case of intraguild predation, with Chlamydomonas acidophila being the common prey and the rotifers/ciliate and A. sol being the intraguild prey and predator, respectively. We further studied this intraguild predation along a resource gradient using Cephalodella sp. as the intraguild prey. The interactions among the three species led to an increase in relative rotifer abundance with increasing resource (Chlamydomonas) densities. By applying a series of laboratory experiments, we revealed the complexity of trophic interactions within a natural extremophilic community.
Extreme habitats often harbor specific communities that differ substantially from non-extreme habitats. In many cases, these communities are characterized by archaea, bacteria and protists, whereas the number of species of metazoa and higher plants is relatively low. In extremely acidic habitats, mostly prokaryotes and protists thrive, and only very few metazoa thrive, for example, rotifers. Since many studies have investigated the physiology and ecology of individual species, there is still a gap in research on direct, trophic interactions among extremophiles. To fill this gap, we experimentally studied the trophic interactions between a predatory protist (Actinophrys sol, Heliozoa) and its prey, the rotifers Elosa woralli and Cephalodella sp., the ciliate Urosomoida sp. and the mixotrophic protist Chlamydomonas acidophila (a green phytoflagellate, Chlorophyta). We found substantial predation pressure on all animal prey. High densities of Chlamydomonas acidophila reduced the predation impact on the rotifers by interfering with the feeding behaviour of A. sol. These trophic relations represent a natural case of intraguild predation, with Chlamydomonas acidophila being the common prey and the rotifers/ciliate and A. sol being the intraguild prey and predator, respectively. We further studied this intraguild predation along a resource gradient using Cephalodella sp. as the intraguild prey. The interactions among the three species led to an increase in relative rotifer abundance with increasing resource (Chlamydomonas) densities. By applying a series of laboratory experiments, we revealed the complexity of trophic interactions within a natural extremophilic community.
The Brassica napus seed microbiota is cultivar-specific and transmitted via paternal breeding lines
(2022)
Seed microbiota influence germination and plant health and have the potential to improve crop performance, but the factors that determine their structure and functions are still not fully understood.
Here, we analysed the impact of plant-related and external factors on seed endophyte communities of 10 different oilseed rape (Brassica napus L.) cultivars from 26 field sites across Europe.
All seed lots harboured a high abundance and diversity of endophytes, which were dominated by six genera: Ralstonia, Serratia, Enterobacter, Pseudomonas, Pantoea, and Sphingomonas.
The cultivar was the main factor explaining the variations in bacterial diversity, abundance and composition. In addition, the latter was significantly influenced by diverse biotic and abiotic factors, for example host germination rates and disease resistance against Plasmodiophora brassicae.
A set of bacterial biomarkers was identified to discriminate between characteristics of the seeds, for example Sphingomonas for improved germination and Brevundimonas for disease resistance.
Application of a Bayesian community approach suggested vertical transmission of seed endophytes, where the paternal parent plays a major role and might even determine the germination performance of the offspring.
This study contributes to the understanding of seed microbiome assembly and underlines the potential of the microbiome to be implemented in crop breeding and biocontrol programmes.
The morphogenesis of sessile plants is mainly driven by directional cell growth and cell division. The organization of their cytoskeleton and the mechanical properties of the cell wall greatly influence morphogenetic events in plants. It is well known that cortical microtubules (CMTs) contribute to directional growth by regulating the deposition of the cellulose microfibrils, as major cell wall fortifying elements. More recent findings demonstrate that mechanical stresses existing in cells and tissues influence microtubule organization. Also, in dividing cells, mechanical stress directions contribute to the orientation of the new cell wall. In comparison to the microtubule cytoskeleton, the role of the actin cytoskeleton in regulating shoot meristem morphogenesis has not been extensively studied.
This thesis focuses on the functional relevance of the actin cytoskeleton during cell and tissue scale morphogenesis in the shoot apical meristem (SAM) of Arabidopsis thaliana. Visualization of transcriptional reporters indicates that ACTIN2 and ACTIN7 are two highly expressed actin genes in the SAM. A link between the actin cytoskeleton and SAM development derives from the observation that the act2-1 act7-1 double mutant has abnormal cell shape and perturbed phyllotactic patterns. Live-cell imaging of the actin cytoskeleton further shows that its organization correlates with cell shape, which indicates a potential role of actin in influencing cellular morphogenesis.
In this thesis, a detailed characterization of the act2-1 act7-1 mutant reveals that perturbation of actin leads to more rectangular cellular geometries with more 90° cell internal angles, and higher incidences of four-way junctions (four cell boundaries intersecting together). This observation deviates from the conventional tricellular junctions found in epidermal cells. Quantitative cellular-level growth data indicates that such differences in the act2-1 act7-1 mutant arise due to the reduced accuracy in the placement of the new cell wall, as well as its mechanical maturation. Changes in cellular morphology observed in the act2-1 act7-1 mutant result in cell packing defects that subsequently compromise the flow of information among cells in the SAM.
Throughout their lifetime plants need to adapt to temperature changes. Plants adapt to nonfreezing cold temperatures in a process called cold priming (cold acclimation) and lose the acquired freezing tolerance during warmer temperatures through deacclimation. The alternation of both processes is essential for plants to achieve optimal fitness in response to different temperature conditions. Cold acclimation has been extensively studied, however, little is known about the regulation of deacclimation. This thesis elucidates the process of deacclimation on a physiological and molecular level in Arabidopsis thaliana. Electrolyte leakage measurements during cold acclimation and up to four days of deacclimation enabled the identification of four knockout mutants (hra1, lbd41, mbf1c and jub1) with a slower rate of deacclimation compared to the wild type. A transcriptomic study using RNA-Sequencing in A. thaliana Col-0, jub1 and mbf1c identified the importance of the inhibition of stress responsive and Jasmonate-ZIM-domain genes as well as the regulation of cell wall modifications during deacclimation. Moreover, measurements of alcohol dehydrogenase activity and gene expression changes of hypoxia markers during the first four days of deacclimation evidently showed that a hypoxia response is activated during deacclimation. Epigenetic regulation was observed to be extensively involved during cold acclimation and 24 h of deacclimation in A. thaliana. Further, both deacclimation studies showed that the previous hypothesis that heat stress might play a role in early deacclimation, is not likely. A number of DNA- and histone demethylases as well as histone variants were upregulated during deacclimation suggesting a role in plant memory. Recently, multiple studies have shown that plants are able to retain memory of a previous cold stress even after a week of deacclimation. In this work, transcriptomic and metabolomic analyses of Arabidopsis during 24 h of priming (cold acclimation) and triggering (recurring cold stress after deacclimation) revealed a uniquely significant and transient induction of DREB1D, DREB1E and DREB1F transcription factors during triggering contributing to fine-tuning of the second cold stress response. Furthermore, genes encoding Late Embryogenesis Abundant (LEA) and antifreeze proteins and proteins detoxifying reactive oxygen species were higher induced during late triggering (24 h) compared to primed samples, while cell wall remodelers of the class xyloglucan endotransglucosylase/hydrolase were early responders of triggering. The high induction of cell wall remodelers during deacclimation as well as triggering proposes that these proteins play an essential role in the stabilization of the cells during growth as well as the response to recurring stresses. Collectively this work gives new insights on the regulation of deacclimation and cold stress memory in A. thaliana and opens the door to future targeted studies of essential genes in this process.