Refine
Year of publication
- 2021 (32) (remove)
Document Type
- Doctoral Thesis (32) (remove)
Is part of the Bibliography
- yes (32)
Keywords
- Agrarökologie (2)
- Arabidopsis thaliana (2)
- Cyanobakterien (2)
- Influenza (2)
- Nahrungsnetze (2)
- Photosynthese (2)
- atomic force microscopy (2)
- cell wall (2)
- 13CO2 labeling (1)
- 2-oxoglutarat / FeII- abhängige Dioxygenases (1)
Institute
- Institut für Biochemie und Biologie (32) (remove)
Cyanobacteria are an abundant bacterial group and are found in a variety of ecological niches all around the globe. They can serve as a real threat for fish or mammals and can restrict the use of lakes or rivers for recreational purposes or as a source of drinking water, when they form blooms. One of the most abundant bloom-forming cyanobacteria is Microcystis aeruginosa.
In the first part of the study, the role and possible dynamics of RubisCO in M. aeruginosa during high-light irradiation were examined. Its response was analyzed on the protein and peptide level via immunoblotting, immunofluorescence microscopy and with high performance liquid chromatography (HPLC). It was revealed that large amounts of RubisCO were located outside of carboxysomes under the applied high light stress. RubisCO aggregated mainly underneath the cytoplasmic membrane. There it forms a putative Calvin-Benson-Bassham (CBB) super complex together with other enzymes of photosynthesis. This complex could be part of an alternative carbon-concentrating mechanism (CCM) in M. aeruginosa, which enables a faster, and energy saving adaptation to high light stress of the whole bloom.
Furthermore, the re-localization of RubisCO was delayed in the microcystin-deficient mutant ΔmcyB and RubisCO was more evenly distributed over the cell in comparison to the wild type. Since ΔmcyB is not harmed in its growth, possibly other produced cyanopeptides as aeruginosin or cyanopeptolin also play a role in the stabilization of RubisCO and the putative CBB complex, especially in the microcystin-free mutant.
In the second part of this work, the possible role of microcystin as an extracellular signaling peptide during the diurnal cycle was studied. HPLC analysis showed a strong increase of extracellular microcystin in the wild type when the population entered nighttime and it resumed into the next day as well. Together with the increase of extracellular microcystin, a strong decrease of protein-bound intracellular microcystin was observed via immunoblot analysis. Interestingly, the signal of the large subunit of RubisCO (RbcL) also diminished when high amounts of microcystin were present in the surrounding medium. Microcystin addition experiments to M. aeruginosa WT and ΔmcyB cultures support this observation, since the immunoblot signal of both subunits of RubisCO and CcmK, a shell protein of carboxysomes, diminished after the addition of microcystin. In addition, the fluctuation of cyanopeptolin during the diurnal cycle indicates a more prominent role of other cyanopeptides besides microcystin as a signaling peptide, intracellularly as well as extracellularly.
The life cycle of higher plants is based on recurring phases of growth and development based on repetitive sequences of cell division, cell expansion and cell differentiation. This dissertation deals with two projects, each of them investigating two different topics that are related to cell expansion. The first project is examining an Arabidopsis thaliana mutant exhibiting overall cell enlargement and the second project is analysing two naturally occurring floral morphs of Amsinckia spectabilis (Boraginaceae) differing (amongst others) in style length and anther heights due to differences in longitudinal cell elongation. The EMS-mutant eop1 was shown to exhibit a petal size increase of 26% caused by cell enlargement. Further phenotypes were detected, such as cotyledon size increase (based on larger cells) as well as increased carpel, sepal, leaf and pollen sizes. Plant height was shown to be increased and more highly branched trichomes explained the hairy eop1 phenotype. Fine mapping revealed the causal SNP to be a C to T transition at the last nucleotide of intron 7 of the INCURVATA11 (ICU11) gene, a 2-oxoglutarate /Fe(II)-dependant dioxygenase, and thus causing missplicing of the mRNA. Two T-DNA insertion lines (icu11-2 & icu11-4) confirmed ICU11 as causal gene by exhibiting increased petal size. A comparison of three icu11 alleles, which possessed different mutation-related changes, either overexpressing ICU11 or modified mRNAs, was the base for investigating the molecular mechanism that underlies the observed phenotype. Different approaches revealed contradictory results regarding ICU11 protein functionality in the icu11 mutants. A complementation assay proved the three mutants to be exchangeable and ICU11 overexpression in the wild-type led to an icu11-like phenotype, arguing for all three icu11 mutants to be GOF mutants. Contradicting this conclusion, the icu11-4 line could be rescued by a genomic ICU11 transgene. A model, based on the assumption that an overexpression of ICU11 is inhibiting the function of the protein, and thus causing the same effect as a LOF protein was proposed. Further, icu11-3 (eop1) mutants were shown to have an increased resistance towards paclobutrazol, a gibberellin (GA) inhibitor and an upregulation of AtGA20ox2, a main GA biosynthesis gene. Additionally, ICU11 subcellular localization was discovered to be cytoplasmic, supporting the assumption, that ICU11 affects GA biosynthesis and overall GA level, possibly explaining the observed (GA-overdose) phenotype.
The second project aimed to identify the genetic base of the S-locus in Amsinckia spectabilis, as the Amsinckia genus represents untypical characteristics for a heterostylous species, such as no obvious self-incompatibility (SI) and the repeated transition towards homostylous and fully selfing variants. The work was based on three Amsinckia spectabilis forms: a heterostylous form, consisting of two floral morphs with reciprocal positioning of sexual organs (S-morph: high anthers and a short style and L-morph: low anthers and a long style), and two homostylous forms, one large-flowered and partially selfing and the other small-flowered and fully selfing. The maintenance of the two floral morphs is genetically based on the S-locus region, containing genes that encode for the morph-specific traits, which are marked by a tight linkage due to suppressed recombination. Natural populations are found to possess a 1:1 S:L morph ratio, that can be explained by predominant disassortative mating of the two morphs, causing the occurrence of the dominant S-allele only in the heterozygous state (heterozygous (Ss) for the S-morph and homozygous recessive (ss) for the L-morph). Investigation of morph-specific phenotypes detected 56% elongated L-morph styles and 58% higher positioned S-morph anthers. Approximately 50% of the observed size differences were explained by an increase in cell elongation. Moreover, additional phenotypes were found, such as 21% enlarged S-morph pollen and no obvious SI, confirmed by hand pollinated seed counts, in vivo pollen tube growth and the development of homozygous dominant SS individuals via selfing. The Amsinckia spec. S-locus was assumed to at least consist of the G- (style length), the A- (anther height) and the P- (pollen size) locus. Comparative Transcriptomics of the two morphs revealed 22 differentially expressed markers that were found to be located within two contigs of a SS individual PacBio genome assembly, allowing the localization of the S-locus to be delimited to a region of approximately 23 Mb. Contradictory to revealed S-loci within the plant kingdom, no strong argument for a present hemizygous region was found to be causal for the suppressed recombination of the S-locus, so that an inversion was assumed to be the causal mechanism.
In C3 plants, CO2 diffuses into the leaf and is assimilated by the Calvin-Benson cycle in the mesophyll cells. It leaves Rubisco open to its side reaction with O2, resulting in a wasteful cycle known as photorespiration. A sharp fall in atmospheric CO2 levels about 30 million years ago have further increased the side reaction with O2. The pressure to reduce photorespiration led, in over 60 plant genera, to the evolution of a CO2-concentrating mechanism called C4 photosynthesis; in this mode, CO2 is initially incorporated into 4-carbon organic acids, which diffuse to the bundle sheath and are decarboxylated to provide CO2 to Rubisco. Some genera, like Flaveria, contain several species that represent different steps in this complex evolutionary process. However, the majority of terrestrial plant species did not evolve a CO2-concentrating mechanism and perform C3 photosynthesis.
This thesis compares photosynthetic metabolism in several species with C3, C4 and intermediate modes of photosynthesis. Metabolite profiling and stable isotope labelling were performed to detect inter-specific differences changes in metabolite profile and, hence, how a pathway operates. The results obtained were subjected to integrative data analyses like hierarchical clustering and principal component analysis, and were deepened by correlation analyses to uncover specific metabolic features and reaction steps that were conserved or differed between species.
The main findings are that Calvin-Benson cycle metabolite profiles differ between C3 and C4 species and between different C3 species, including a very different response to rising irradiance in Arabidopsis and rice. These findings confirm Calvin-Benson cycle operation diverged between C3 and C4 species and, most unexpectedly, even between different C3 species. Moreover, primary metabolic profiles supported the current C4 evolutionary model in the genus Flaveria and also provided new insights and opened up new questions. Metabolite profiles also point toward a progressive adjustment of the Calvin-Benson cycle during the evolution of C4 photosynthesis. Overall, this thesis point out the importance of a metabolite-centric approach to uncover underlying differences in species apparently sharing the same photosynthetic routes and as a valid method to investigate evolutionary transition between C3 and C4 photosynthesis.
There is a general consensus that diverse ecological communities are better equipped to adapt to changes in their environment, but our understanding of the mechanisms by which they do so remains incomplete. Accurately predicting how the global biodiversity crisis affects the functioning of ecosystems, and the services they provide, requires extensive knowledge about these mechanisms.
Mathematical models of food webs have been successful in uncovering many aspects of the link between diversity and ecosystem functioning in small food web modules, containing at most two adaptive trophic levels. Meaningful extrapolation of this understanding to the functioning of natural food webs remains difficult, due to the presence of complex interactions that are not always accurately captured by bitrophic descriptions of food webs. In this dissertation, we expand this approach to tritrophic food web models by including the third trophic level. Using a functional trait approach, coexistence of all species is ensured using fitness-balancing trade-offs. For example, the defense-growth trade-off implies that species may be defended against predation, but this defense comes at the cost of a lower maximal growth rate. In these food webs, the functional diversity on a given trophic level can be varied by modifying the trait differences between the species on that level.
In the first project, we find that functional diversity promotes high biomass on the top level, which, in turn, leads to a reduction in the temporal variability due to compensatory dynamical patterns governed by the top level. Next, these results are generalized by investigating the average behavior of tritrophic food webs, for wide intervals of all parameters describing species interactions in the food web. We find that the diversity on the top level is most important for determining the biomass and temporal variability of all other trophic levels, and show how biomass is only transferred efficiently to the top level when diversity is high everywhere in the food web. In the third project, we compare the response of a simple food chain against a nutrient pulse perturbation, to that of a food web with diversity on every trophic level. By joint consideration of the resistance, resilience, and elasticity, we uncover that the response is efficiently buffered when biomass on the top level is high, which is facilitated by functional diversity on every trophic level in the food web. Finally, in the fourth project, we show that even in a simple consumer-resource model without any diversity, top-down control on the intermediate level frequently causes the phase difference between the intermediate and basal level to deviate from the quarter-cycle lag rule. By adding a top predator, we show that these deviations become even more likely, and anti-phase cycles are often observed.
The combined results of these projects show how the properties of the top trophic level, including its functional diversity, have a decisive influence on the functioning of tritrophic food webs from a mechanistic perspective. Because top species are often among the most vulnerable to extinction, our results emphasize the importance of their conservation in ecosystem management and restoration strategies.
Influenza A virus (IAV) is a pathogen responsible for severe seasonal epidemics threatening human and animal populations every year. During the viral assembly process in the infected cells, the plasma membrane (PM) has to bend in localized regions into a vesicle towards the extracellular side. Studies in cellular models have proposed that different viral proteins might be responsible for inducing membrane curvature in this context (including M1), but a clear consensus has not been reached. M1 is the most abundant protein in IAV particles. It plays an important role in virus assembly and budding at the PM. M1 is recruited to the host cell membrane where it associates with lipids and other viral proteins. However, the details of M1 interactions with the cellular PM, as well as M1-mediated membrane bending at the budozone, have not been clarified.
In this work, we used several experimental approaches to analyze M1-lipids and M1-M1 interactions. By performing SPR analysis, we quantified membrane association for full-length M1 and different genetically engineered M1 constructs (i.e., N- and C-terminally truncated constructs and a mutant of the polybasic region). This allowed us to obtain novel information on the protein regions mediating M1 binding to membranes. By using fluorescence microscopy, cryogenic transmission electron microscopy (cryo-TEM), and three-dimensional (3D) tomography (cryo-ET), we showed that M1 is indeed able to cause membrane deformation on vesicles containing negatively-charged lipids, in the absence of other viral components. Further, sFCS analysis proved that simple protein binding is not sufficient to induce membrane restructuring. Rather, it appears that stable M1-M1 interactions and multimer formation are required to alter the bilayer three-dimensional structure through the formation of a protein scaffold.
Finally, to mimic the budding mechanism in cells that arise by the lateral organization of the virus membrane components on lipid raft domains, we created vesicles with lipid domains. Our results showed that local binding of M1 to spatial confined acidic lipids within membrane domains of vesicles led to local M1 inward curvature.
In the light of climate change, rising demands for agricultural products and the intensification and specialization of agricultural systems, ensuring an adequate and reliable supply of food is fundamental for food security. Maintaining diversity and redundancy has been postulated as one generic principle to increase the resilience of agricultural production and other ecosystem services. For example, if one crop fails due to climate instability and extreme events, others can compensate the losses. Crop diversity might be particularly important if different crops show asynchronous production trends. Furthermore, spatial heterogeneity has been suggested to increase stability at larger scales as production losses in some areas can be buffered by surpluses in undisturbed ones. Besides systematically investigating the mechanisms underlying stability, identifying transformative pathways that foster them is important.
In my thesis, I aim at answering the following questions: (i) How does yield stability differ between nations, regions and farms, and what is the effect of crop diversity on yield stability in relation to agricultural inputs, climate heterogeneity, climate instability and time at the national, regional or farm level? (ii) Is asynchrony between crops a better predictor of production stability than crop diversity? (iii) What is the effect of asynchrony between and within crops on stability and how is it related to crop diversity and space, respectively? (iv) What is the state of the art and what are knowledge gaps in exploring resilience and its multidimensionality in ecological and social-ecological systems with agent-based models and what are potential ways forward?
In the first chapter, I provide the theoretical background for the subsequent analyses. I stress the need to better understand the resilience of social-ecological systems and particularly the stability of agricultural production. Moreover, I introduce diversity and spatial heterogeneity as two prominently discussed resilience mechanisms and describe approaches to assess resilience.
In the second chapter, I combined agriculture and climate data at three levels of organization and spatial extents to investigate yield stability patterns and their relation to crop diversity, fertilizer, irrigation, climate heterogeneity and instability and time of nations globally, regions in Europe and farms in Germany using statistical analyses. Yield stability decreased from the national to the farm level. Several nations and regions substantially contributed to larger-scale stability. Crop diversity was positively associated with yield stability across all three levels of organization. This effect was typically more profound at smaller scales and in variable climates. In addition to crop diversity, climate heterogeneity was an important stabilizing mechanism especially at larger scales. These results confirm the stabilizing effect of crop diversity and spatial heterogeneity, yet their importance depends on the scale and agricultural management.
Building on the findings of the second chapter, I deepened in the third chapter my research on the effect of crop diversity at the national level. In particular, I tested if asynchrony between crops, i.e. between the temporal production patterns of different crops, better predicts agricultural production stability than crop diversity. The stabilizing effect of asynchrony was multiple times higher than the effect of crop diversity, i.e. asynchrony is one important property that can explain why a higher diversity supports the stability of national food production. Therefore, strategies to stabilize agricultural production through crop diversification also need to account for the asynchrony of the crops considered.
The previous chapters suggest that both asynchrony between crops and spatial heterogeneity are important stabilizing mechanisms. In the fourth chapter, I therefore aimed at better understanding the relative importance of asynchrony between and within crops, i.e. between the temporal production patterns of different crops and between the temporal production patterns of different cultivation areas of the same crop. Better understanding their relative importance is important to inform agricultural management decisions, but so far this has been hardly assessed. To address this, I used crop production data to study the effect of asynchrony between and within crops on the stability of agricultural production in regions in Germany and nations in Europe. Both asynchrony between and within crops consistently stabilized agricultural production. Adding crops increased asynchrony between crops, yet this effect levelled off after eight crops in regions in Germany and after four crops in nations in Europe. Combining already ten farms within a region led to high asynchrony within crops, indicating distinct production patters, while this effect was weaker when combining multiple regions within a nation. The results suggest, that both mechanisms need to be considered in agricultural management strategies that strive for more resilient farming systems.
The analyses in the foregoing chapters focused at different levels of organization, scales and factors potentially influencing agricultural stability. However, these statistical analyses are restricted by data availability and investigate correlative relationships, thus they cannot provide a mechanistic understanding of the actual processes underlying resilience. In this regard, agent-based models (ABM) are a promising tool. Besides their ability to measure different properties and to integrate multiple situations through extensive manipulation in a fully controlled system, they can capture the emergence of system resilience from individual interactions and feedbacks across different levels of organization. In the fifth chapter, I therefore reviewed the state of the art and potential knowledge gaps in exploring resilience and its multidimensionality in ecological and social-ecological systems with ABMs. Next, I derived recommendations for a more effective use of ABMs in resilience research. The review suggests that the potential of ABMs is not utilized in most models as they typically focus on a single dimension of resilience and are mostly limited to one reference state, disturbance type and scale. Moreover, only few studies explicitly test the ability of different mechanisms to support resilience. To solve real-world problems related to the resilience of complex systems, ABMs need to assess multiple stability properties for different situations and under consideration of the mechanisms that are hypothesized to render a system resilient.
In the sixth chapter, I discuss the major conclusions that can be drawn from the previous chapters. Moreover, I showcase the use of simulation models to identify management strategies to enhance asynchrony and thus stability, and the potential of ABMs to identify pathways to implement such strategies.
The results of my thesis confirm the stabilizing effect of crop diversity, yet its importance depends on the scale, agricultural management and climate. Moreover, strategies to stabilize agricultural production through crop diversification also need to account for the asynchrony of the crops considered. As spatial heterogeneity and particularly asynchrony within crops strongly enhances stability, integrated management approaches are needed that simultaneously address multiple resilience mechanisms at different levels of organization, scales and time horizons. For example, the simulation suggests that only increasing the number of crops at both the pixel and landscape level avoids trade-offs between asynchrony between and within crops. If their potential is better exploited, agent-based models have the capacity to systematically assess resilience and to identify comprehensive pathways towards resilient farming systems.
The prevalence of diseases associated with misfolded proteins increases with age. When cellular defense mechanisms become limited, misfolded proteins form aggregates and may also develop more stable cross-β structures ultimately forming amyloid aggregates. Amyloid aggregates are associated with neurodegenerative diseases such as Alzheimer’s disease and Huntington’s disease. The formation of amyloid deposits, their toxicity and cellular defense mechanisms have been intensively studied. However, surprisingly little is known about the effects of protein aggregates on cellular signal transduction. It is also not understood whether the presence of aggregation-prone, but still soluble proteins affect signal transduction.
In this study, the still soluble aggregation-prone HttExon1Q74 and its amyloid aggregates were used to analyze the effect of amyloid aggregates on internalization and receptor activation of G protein-coupled receptors (GPCRs), the largest protein family of mammalian cell surface receptors involved in signal transduction. The aggregated HttExon1Q74, but not its soluble form, could inhibit ligand-induced clathrin-mediated endocytosis (CME) of various GPCRs. Most likely this inhibitory effect is based on a terminal sequestration of the HSC70 chaperone to the aggregates which is necessary for CME. Using the vasopressinV1a receptor (V1aR) and the corticotropin-releasing factor receptor 1 (CRF1R) as a model, it could be shown that the presence of HttExon1Q74 aggregates and the inhibition of ligand-induced CME leads to an accumulation of desensitized receptors at the plasma membrane. In turn, this disrupts Gq-mediated Ca2+ signaling and Gs-mediated cAMP signaling of the V1aR and the CRF1R respectively. In contrast to HttExon1Q74 amyloid aggregates, soluble HttExon1Q74 as well as amorphous aggregates did not inhibit GPCR internalization and signaling demonstrating that cellular signal transduction mechanisms are specifically impaired in response to the formation of amyloid aggregates.
In addition, preliminary experiments could show that HttExon1Q74 aggregates provoke an increase in membrane expression of a protein from a structurally and functionally unrelated membrane protein family, namely the serotonin transporter SERT. As SERT is the main pharmacological target to treat depression this could shed light on this commonly occurring comorbidity in neurodegenerative diseases, in particular in early disease states.
Iron-sulfur clusters are essential enzyme cofactors. The most common and stable clusters are [2Fe-2S] and [4Fe-4S] that are found in nature. They are involved in crucial biological processes like respiration, gene regulation, protein translation, replication and DNA repair in prokaryotes and eukaryotes. In Escherichia coli, Fe-S clusters are essential for molybdenum cofactor (Moco) biosynthesis, which is a ubiquitous and highly conserved pathway. The first step of Moco biosynthesis is catalyzed by the MoaA protein to produce cyclic pyranopterin monophosphate (cPMP) from 5’GTP. MoaA is a [4Fe-4S] cluster containing radical S-adenosyl-L-methionine (SAM) enzyme. The focus of this study was to investigate Fe-S cluster insertion into MoaA under nitrate and TMAO respiratory conditions using E. coli as a model organism. Nitrate and TMAO respiration usually occur under anaerobic conditions, where oxygen is depleted. Under these conditions, E. coli uses nitrate and TMAO as terminal electron. Previous studies revealed that Fe-S cluster insertion is performed by Fe-S cluster carrier proteins. In E. coli, these proteins are known as A-type carrier proteins (ATC) by phylogenomic and genetic studies. So far, three of them have been characterized in detail in E. coli, namely IscA, SufA, and ErpA. This study shows that ErpA and IscA are involved in Fe-S cluster insertion into MoaA under nitrate and TMAO respiratory conditions. ErpA and IscA can partially replace each other in their role to provide [4Fe-4S] clusters for MoaA. SufA is not able to replace the functions of IscA or ErpA under nitrate respiratory conditions.
Nitrate reductase is a molybdoenzyme that coordinates Moco and Fe-S clusters. Under nitrate respiratory conditions, the expression of nitrate reductase is significantly increased in E. coli. Nitrate reductase is encoded in narGHJI genes, the expression of which is regulated by the transcriptional regulator, fumarate and nitrate reduction (FNR). The activation of FNR under conditions of nitrate respiration requires one [4Fe-4S] cluster. In this part of the study, we analyzed the insertion of Fe-S cluster into FNR for the expression of narGHJI genes in E. coli. The results indicate that ErpA is essential for the FNR-dependent expression of the narGHJI genes, a role that can be replaced partially by IscA and SufA when they are produced sufficiently under the conditions tested. This observation suggests that ErpA is indirectly regulating nitrate reductase expression via inserting Fe-S clusters into FNR.
Most molybdoenzymes are complex multi-subunit and multi-cofactor-containing enzymes that coordinate Fe-S clusters, which are functioning as electron transfer chains for catalysis. In E. coli, periplasmic aldehyde oxidoreductase (PaoAC) is a heterotrimeric molybdoenzyme that
consists of flavin, two [2Fe-2S], one [4Fe-4S] cluster and Moco. In the last part of this study, we investigated the insertion of Fe-S clusters into E. coli periplasmic aldehyde oxidoreductase (PaoAC). The results show that SufA and ErpA are involved in inserting [4Fe-4S] and [2Fe-2S] clusters into PaoABC, respectively under aerobic respiratory conditions.
Artificial light at night (ALAN), one form of human-induced rapid environmental change, is continuously spreading in space and time and increasing in intensity as part of the ongoing urbanization. A vast range of animals is known to be affected by ALAN as, among other things, it can mask natural light cues and change both the perceived as well as the actual predation risk. Since ALAN per se is restricted to the night, the majority of studies so far have focused on nocturnal species or behavioral changes during the night. How polyphasic species respond to ALAN has been largely overlooked, although they can possibly carry over effects of nighttime illumination into the day. Additionally, individuals within a species are known to consistently differ in their personality which includes risk-taking behavior. While this implies that ALAN can lead to varying anti-predatory responses in animals within a population, knowledge on this topic is still very limited. This thesis aims at investigating what initial behavioral reaction is caused by ALAN in polyphasic small mammals while also incorporating an animal’s personality. Nighttime and daytime activity, movement and foraging behavior of the bank vole (Myodes glareolus) were investigated in regards to effects of different light intensities and partial illumination in the laboratory. Additionally, changes in intra- and interspecific interactions of bank voles and striped field mice (Apodemus agrarius) subjected to ALAN were studied in experimental populations in semi-natural outdoor enclosures. Chapter I explores whether behavioral responses to ALAN of varying intensity are related to animal personality. Results showed that bank voles reduced movement and foraging already under dim light and that bold animals generally moved and foraged more than shy animals. Exclusively under bright illumination did bold animals exploit the food patches more than shy animals. The results demonstrate that bank voles are affected by light intensities prevalent in urban habitats. Additionally, certain light scenarios might lead to an advantage of and a shift towards certain personality types. Chapter II focusses on the effects of partial ALAN on foraging behavior of animals with varying animal personalities while extending the view towards possible carry-over effects of ALAN into the daytime. While bank voles reduced foraging behavior in illuminated areas at night, they increased foraging behavior in those areas at the subsequent day. Bold individuals generally had lower giving-up densities than shy individuals but this difference was especially pronounced during daytime at formerly illuminated food patches. Thus, ALAN can have carry-over effects into the daytime in polyphasic animals and thus has the potential to affect daytime intra- and interspecific interactions. Chapter III broadens the view from the individual to the population level. Experimental populations consisting of bank voles and striped field mice were established in large outdoor enclosures successively experienced natural and artificial light conditions at night. VHF telemetry data revealed that animals were predominantly active during the day under natural conditions. This difference between day and night vanished under ALAN. Additionally, conspecifics reduced home range overlap, proximity and activity synchrony while boldness was not associated with behavioral changed due to ALAN. The results suggest that ALAN has the potential to alter intraspecific interactions and thus can have fitness consequences on the population level. Overall, the present thesis shows that ALAN can affect nighttime and daytime behavior as well as intraspecific interactions of polyphasic small mammals. Differences in risk- taking behavior of individuals may vary in importance depending on other environmental variables. Thus, this thesis hopefully triggers broadening the view regarding the role of an animal’s personality in coping with ALAN and the effects on daytime behavior and diurnal species.
Past and present biodiversity in northeastern Siberia inferred from sedimentary DNA metabarcoding
(2021)
The arctic-boreal treeline is a transition zone from taiga to tundra covering a vast area in Siberia. It often features large environmental gradients and reacts sensitively to changes in the environment. For example, the expansion of shrubs and a northward movement of the treeline are observable in Siberia as a response to the warming climate. The changes in vegetation across the treeline are known to influence the water chemistry in the lakes. This causes further alteration to the composition and diversity of sensitive aquatic organisms such as diatoms and macrophytes. Despite the rising awareness of the complex climate-feedback mechanisms of terrestrial plants, the understanding of their assembly rules and about responses of aquatic biomes in the surrounding treeline lakes is still limited. The goal of this thesis is to examine the previous and present biodiversity of terrestrial and freshwater biomes from the Siberian treeline ecotone, as well as their reactions to environmental changes. In particular, this thesis attempts to examine the performance of applying sedimentary DNA metabarcoding in terrestrial plants, aquatic macrophytes and diatoms, their spatial patterns along the environmental gradients and their temporal patterns throughout the climate transition from the late Pleistocene to Holocene. Sedimentary DNA metabarcoding combined with next-generation sequencing is applied as a primary tool to explore the composition and diversity of terrestrial plants, diatoms and aquatic macrophytes. The main study area is located in Chukotka of northeastern Siberia in the Arctic, a biodiversity hotspot due to its continental location and the diverse habitats of the glacial refugium. The modern diatom diversity was assessed with a specific diatom metabarcoding marker and morphological identification. Both approaches agree to a dominance of Fragilariaceae and Aulacoseiraceae, as well as on the environmental influential indicators of the diatom community. The high diversity of Fragilariaceae identified in the thermokarst lakes is found to follow the vegetation gradient along the treeline, suggesting that diatom metabarcoding can decipher relationships between diatom assemblage shifts and the relevant environmental changes. In particular, the metabarcoding approach detects diversification of fragilarioids in glacial lakes which is not visible using morphology. Sedimentary ancient DNA records indicate a vegetation mosaic of forb-dominated steppe-tundra during 28-19 ka, followed by a shift to dwarf-shrub tundra during 19-14 ka. During the most recent 14 thousand years, the vegetation consists of deciduous shrublands, then a change to boreal forest is observed. Investigations on the alpha diversity of the vegetation show that species richness is unexpectedly highest during pre-LGM, which is likely related to the extensive area that allows for more taxa. The optimum Holocene warming during 9-6 ka is not accompanied by a high richness as widely believed, but with an evenly distributed community by the fulfilment of erect shrubs. Furthermore, changes in taxonomic and phylogenetic diversity show complementary results in understanding community diversity. The composition and richness in the modern macrophytes community from Siberian Arctic and Chinese alpine are best co-influenced by July temperature and electrical conductivity.. Past macrophyte turnover during the late Pleistocene-Holocene is less noticeable in Siberia, whereas a pronounced community change from emergent to submerged plants is detected from Chinese alpine regions at about 14 ka due to increasing temperature and varying water conductivity. Finally, sedimentary DNA metabarcoding is a cost-effective and powerful proxy for ecological application, whereas completeness of the reference library, coverage and resolution of the metabarcoding marker are the major limitations of sedimentary DNA based diversity monitoring. The composition and richness in modern vegetation and macrophytes across broad spatial gradients is constrained by environmental variables, suggesting a potential usage for environmental monitoring. Diatom distributions are driven by different water variables along the treeline. Past records indicate that the shrub coverage has a noticeable influence on the assemblies of both terrestrial plants and aquatic macrophytes, though the shift in macrophyte community is relatively minor in the past 28 thousand years. In the long-term, the shrub expansion may eventually result in a genetically more diverse vegetation community but reduced species richness. When exceeding the optimal temperatures, further warming may lead to a decrease and putative loss of macrophytes and diatoms.
Patterning along the apical-basal (A-B) axis is a crucial step during the early stages of plant embryogenesis and leads to the establishment of two poles of which each will develop their own stem cell niches. The activity of these meristems is responsible for post-embryonic growth, with the shoot apical meristem (SAM) generating the above-ground organs and the root apical meristem (RAM) producing the subterranean structures of the plant. While several transcriptional regulators governing A-B patterning have been identified, precisely how their regulatory function is orchestrated remains elusive. This study focuses on transcriptional co-regulators LEUNIG (LUG) and closely related LEUNIG_HOMOLOG (LUH) and their role in the formation of A-B patterning during embryogenesis as well as their post-embryonic maintenance. A link between the LUG regulatory complex and SAM formation and maintenance comes from the observation that lug mutants heterozygous for the luh allele (lug luh+/-) often have enlarged SAMs resulting from misregulated cell divisions. A more severe phenotype is observed in lug luh double mutants which are embryonically lethal. In this study, a detailed characterisation of lug luh embryo phenotype reveals that these mutants display aberrant cell divisions along the A-B axis, which correlates with defects in auxin distribution, complete loss of apical identity, and altered expression of transcription factors determining basal fate. Like other co-regulators, LUG and LUH lack intrinsic DNA-binding domains and instead must interact with DNA-binding cofactors to ensure recruitment to regulatory elements of target genes. This either involves direct contact between the co-regulators and transcription factors (TFs) or the formation of higher-order complexes with adaptor proteins such as SEUSS (SEU) or related SEUSS-LIKEs (SLKs), which facilitate binding to specific TFs. Results presented in this study provide insight into the molecular framework for the LUG regulatory complex activity during embryogenesis. Both yeast and in planta assays showed that LUG/LUH and SEU/SLKs physically associate with a variety of WUSCHEL-RELATED HOMEOBOX (WOX) TFs including members of the WOX2-module. Furthermore, genetic interactions between members of the WOX2-module and the LUG regulatory complex, support their mutual action during embryogenesis. Based on the reduced activity of HOMEODOMAIN LEUCINE-ZIPPER CLASS III (HD-ZIPIII) promoters in lug luh embryos, a model is proposed in which the LUG regulatory complex functions together with WOX2-module to promote apical identity and subsequent SAM initiation through regulation of the HD-ZIPIIIs. The activity of the LUG complex in promoting basal embryo identity through positive regulation of microRNA165/166 suggests that this complex also has functions that are independent of the WOX2-module. Preliminary work reported in this study further uncovered the role of the LUG regulatory complex in post-embryonic development. While the fasciated inflorescence meristems of lug luh+/- plants displayed defects in auxin transport and altered activity of stem cell markers, embryonically rescued lug luh mutants formed flat and differentiated SAMs. In addition, rescued lug luh mutants exhibited severely disorganised RAM and defects in quiescent center (QC) specification, supporting the involvement of the LUG complex in post-embryonic RAM maintenance.
Water-deficits can cause lethal damage to organisms, which is rooted in cellular dehydration. Many plant species, but also other organisms have developed mechanisms to tolerate such stresses, such as the expression of LEA proteins. Many studies report on physiological protective functions of LEA proteins but lack information about their precise mechanisms on a molecular level. Most LEA proteins are intrinsically disordered in dilute solution but may adopt a distinct secondary structure upon changes in solvent conditions. Understanding the molecular mechanism of how LEA proteins contribute to the counteraction of cellular damage during water-deficits may in the long-term pave the way for breeding crops that are resistant to the effects of global warming. The objective of the work at hand is to improve the biophysical understanding of the sequencestructure-function relationship of LEA proteins as membrane stabilizers, based on the LEA_4 family of the model plant A. thaliana. This is pursued by using a combination of spectroscopic and scattering techniques, supported by bioinformatics and computational analyses. Eight out of the 18 LEA_4 proteins are experimentally assessed revealing that a coil-helix transition in response to water-deficit is a common feature, as predicted for the entire family. In addition, they all stabilize simple membrane models during a freeze/ thaw cycle. Three-dimensional structure prediction of representative members suggests that their completely folded states are represented by a sequential arrangement of alpha-helical segments connected by unstructured linkers, which is experimentally verified for the LEA_4 protein COR15A. The unstructured linker region of COR15A represents a conserved motif among its closest homologs and is, therefore, of particular interest. Facilitating a set of seven designed and investigated COR15A mutants uncovers a complex interplay of transient interactions between the amphipathic alpha-helical segments, mediated by the linker, which fine-tunes folding transitions and structural ensembles upon reduced water-availability. Finally, alpha-helicity is also induced in COR15A upon temperature decrease, which is enhanced in the presence of osmolytes. In addition, high solution osmolarity induced secondary structure is followed by oligomerization of COR15A. Interestingly, the functionality of COR15A, in terms of liposome stabilization, strongly correlates with its alpha-helix ratio in the folded state. The present work significantly improves the understanding of the sequence-structure-function relationship for LEA_4 proteins and offers novel findings on folding mechanisms and oligomerization of COR15A.
Identification of chemical mediators that regulate the specialized metabolism in Nostoc punctiforme
(2021)
Specialized metabolites, so-called natural products, are produced by a variety of different organisms, including bacteria and fungi. Due to their wide range of different biological activities, including pharmaceutical relevant properties, microbial natural products are an important source for drug development. They are encoded by biosynthetic gene clusters (BGCs), which are a group of locally clustered genes. By screening genomic data for genes encoding typical core biosynthetic enzymes, modern bioinformatical approaches are able to predict a wide range of BGCs. To date, only a small fraction of the predicted BGCs have their associated products identified.
The phylum of the cyanobacteria has been shown to be a prolific, but largely untapped source for natural products. Especially multicellular cyanobacterial genera, like Nostoc, harbor a high amount of BGCs in their genomes.
A main goal of this study was to develop new concepts for the discovery of natural products in cyanobacteria. Due to its diverse setup of orphan BGCs and its amenability to genetic manipulation, Nostoc punctiforme PCC 73102 (N. punctiforme) appeared to be a promising candidate to be established as a model organism for natural product discovery in cyanobacteria. By utilizing a combination of genome-mining, bioactivity-screening, variations of culture conditions, as well as metabolic engineering, not only two new polyketides were discovered, but also first-time insights into the regulation of the specialized metabolism in N. punctiforme were gained during this study.
The cultivation of N. punctiforme to very high densities by utilizing increasing light intensities and CO2 levels, led to an enhanced metabolite production, causing rather complex metabolite extracts. By utilizing a library of CFP reporter mutant strains, each strain reporting for one of the predicted BGCs, it was shown that eight out of 15 BGCs were upregulated under high density (HD) cultivation conditions. Furthermore, it could be demonstrated that the supernatant of an HD culture can increase the expression of four of the influenced BGCs, even under conventional cultivation conditions. This led to the hypothesis that a chemical mediator encoded by one of the affected BGCs is accumulating in the HD supernatant and is able to increase the expression of other BGCs as part of a cell-density dependent regulatory circuit. To identify which of the BGCs could be a main trigger of the presumed regulatory circuit, it was tried to activate four BGCs (pks1, pks2, ripp3, ripp4) selectively by overexpression of putative pathway-specific regulatory genes that were found inside the gene clusters. Transcriptional analysis of the mutants revealed that only the mutant strain targeting the pks1 BGC, called AraC_PKS1, was able to upregulate the expression of its associated BGC. From an RNA sequencing study of the AraC_PKS1 mutant strain, it was discovered that beside pks1, the orphan BGCs ripp3 and ripp4 were also upregulated in the mutant strain. Furthermore, it was observed that secondary metabolite production in the AraC_PKS1 mutant strain is further enhanced under high-light and high-CO2 cultivation conditions. The increased production of the pks1 regulator NvlA also had an impact on other regulatory factors, including sigma factors and the RNA chaperone Hfq. Analysis of the AraC_PKS1 cell and supernatant extracts led to the discovery of two novel polyketides, nostoclide and nostovalerolactone, both encoded by the pks1 BGC. Addition of the polyketides to N. punctiforme WT demonstrated that the pks1-derived compounds are able to partly reproduce the effects on secondary metabolite production found in the AraC_PKS1 mutant strain. This indicates that both compounds are acting as extracellular signaling factors as part of a regulatory network. Since not all transcriptional effects that were found in the AraC_PKS1 mutant strain could be reproduced by the pks1 products, it can be assumed that the regulator NvlA has a global effect and is not exclusively specific to the pks1 pathway.
This study was the first to use a putative pathway specific regulator for the specific activation of BGC expression in cyanobacteria. This strategy did not only lead to the detection of two novel polyketides, it also gave first-time insights into the regulatory mechanism of the specialized metabolism in N. punctiforme. This study illustrates that understanding regulatory pathways can aid in the discovery of novel natural products. The findings of this study can guide the design of new screening strategies for bioactive compounds in cyanobacteria and help to develop high-titer production platforms for cyanobacterial natural products.
The presented study investigated the influence of microbial and biogeochemical processes on the physical transport related properties and the fate of microplastics in freshwater reservoirs. The overarching goal was to elucidate the mechanisms leading to sedimentation and deposition of microplastics in such environments. This is of importance, as large amounts of initially buoyant microplastics are found in reservoir sediments worldwide. However, the transport processes which lead to microplastics accumulation in sediments, were up to now understudied.
The impact of biofilm formation on the density and subsequent sedimentation of microplastics was investigated in the eutrophic Bautzen reservoirs (Chapter 2). Biofilms are complex microbial communities fixed to submerged surfaces through a slimy organic film. The mineral calcite was detected in the biofilms, which led to the
sinking of the overgrown microplastic particles. The calcite was of biogenic origin, most likely precipitated by sessile cyanobacteria within the biofilms.
Biofilm formation was also studied in the mesotrophic Malter reservoir. Unlike in Bautzen reservoir, biofilm formation did not govern the sedimentation of different microplastics in Malter reservoir (Chapter 3). Instead autumnal lake mixing led to
the formation of sinking aggregates of microplastics and iron colloids. Such colloids form when anoxic, iron-rich water from the hypolimnion mixes with the oxygenated epilimnetic waters. The colloids bind organic material from the lake water, which leads to the formation of large and sinking iron-organo flocs.
Hence, iron-organo floc formation and their influence on the buoyancy or burial of microplastics into sediments of Bautzen reservoir was studied in laboratory experiments (Chapter 4). Microplastics of different shapes (fiber, fragment, sphere) and sizes were readily incorporated into sinking iron-organo flocs. By this initially buoyant polyethylene microplastics were transported on top of sediments from Bautzen reservoir. Shortly after deposition, the microplastic bearing flocs started to subside and transported the pollutants into deeper sediment layers. The microplastics were not released from the sediments within two months of laboratory incubation.
The stability of floc microplastic deposition was further investigated employing experiments with the iron reducing model organism Shewanella oneidensis (Chapter 5). It was shown, that reduction or re-mineralization of the iron minerals did not affect the integrity of the iron-organo flocs. The organic matrix was stable under iron reducing conditions. Hence, no incorporated microplastics were released from the flocs. As similar processes are likely to take place in natural sediments, this might explain the previous described low microplastic release from the sediments.
This thesis introduced different mechanisms leading to the sedimentation of initially buoyant microplastics and to their subsequent deposition in freshwater reservoirs. Novel processes such as the aggregation with iron-organo flocs were identified and the understudied issue of biofilm densification through biogenic mineral formation was further investigated. The findings might have implications for the fate of microplastics within the river-reservoir system and outline the role of freshwater reservoirs as important accumulation zone for microplastics. Microplastics deposited in the sediments of reservoirs might not be transported further by through flowing river. Hence the study might contribute to better risk assessment and transport balances of these anthropogenic contaminants.
As the ongoing trend of developing smart materials that can reversibly switch geometry stimulated by environmental control addressed increasing attention in many research fields, especially for biomedical or soft robotic applications. Shape-memory polymers (SMPs), which can change shape, stiffness, size, and structure when exposed to an external stimulus, are intensively explored as encouraging material candidates for achieving multifunctionality, and for miniaturizing into micro-components to expand the applications. Besides, the geometrical design has gained growing attention for creating engineering applications, such as bi-stable mechanisms, and has the potential to be explored by implementing SMP for new functions. In this context, this thesis aimed to develop smart micro-/nano-objects based on SMP and explore new functions by geometrical design using SMP. Here, two types of stimuli-responsive objects capable of one-way temperature-memory effect (TME) or free-standing reversible actuation e.g., micro/nanofibers (i) and microcuboids (ii) at different aspects were explored. At first, it was hypothesized that the advanced atomic force microscopy (AFM) platform can be established to study individual polymeric micro-/nanofibers (i) in terms of incorporation and characterization of a reversible shape-memory actuation capability. Crystallizable material was chosen for preparing the fibers and the molecular alignment within the fibers among different diameters will influence the crystallization-induced elongation during cooling that determined the reversible effect. For the second type, microcuboids (ii), it was hypothesized that a programming and quantification approach can be developed to enable the realization and characterization of a one-way micro-TME and micro-shape-memory polymer actuation (SMPA) in microcuboids. The responsive temperature of one-way shape transformation can be tuned by programming temperature (Tp) and the separation temperature (Tsep) for post-programming can influence the actuation. Finally, a geometrical design with bi-stability was combined with SME to create new functions of shape actuation. It was hypothesized that the predicted bi-stable or mono-stable structures can be achieved with the aid of digital fabrication methods. Using shape-memory effect (SME), the alteration of bi-stable and mono-stable can initiate shape transformation with a larger magnitude and higher energy output.
In the first part, the method to quantify the reversible SMPA of a single micro/nano crystallizable fiber with geometry change during the actuation was explored. Electrospinning was used to prepare poly (ε-caprolactone) (PCL) micro/nanofiber with different diameters, which were fixed by UV glue and crosslinked on the structured silicon wafer. Using AFM, the programming, as well as the observation of recovery and reversible displacement of the fiber, were performed by vertical three-point bending at the free suspended part. A plateau tip was chosen to achieve stable contact and longer working distance for performing larger deformation, enabling intensified reversible SMPA of single fibers. In this way, programming strains of 39 ± 1% or 46 ± 1% were realized for fiber with a diameter of 1 ± 0.2 µm and 300 ± 50 nm, which were bent at 80 °C and fixed at 10 °C. Values for the reversible elongation of εrev = 3.4 ± 0.1% and 10.5 ± 0.1% were obtained for a single micro and nanofiber respectively between 10 and 60 °C. The higher actuation effect observed for nanofiber demonstrated that the highly compact and oriented crystallites in nanofibers, which determined the pronounced εrev compared to the thick microfibers. Besides, a stable reversible actuation of a nanofiber can be tracked by AFM tip up to 10 cycles, indicating a sustainable application can be achieved on the fiber actuators. The findings obtained for cPCL micro-/nano-fibers will help design and evaluate the next generation polymeric microactuators or micromanipulators.
The second part of the thesis studies the shape-memory effect (SME) of a single individual SMP micro-object by controlling deformation temperatures during programming and actuation temperatures during reversible change. In this work, microcuboids of crosslinked poly[ethylene-co-(vinyl acetate)] (cPEVA) elastomers with 18 wt% vinyl acetate (VA) contents were successfully prepared by template-based replication from polydimethylsiloxane (PDMS) mold. The micro-TME and micro-SMPA were observed and studied based on micro-geometry change using optical microscopy (OM) and AFM. Different switching temperatures of shape recovery were achieved from 55 °C to 86 °C by tuning Tp from 55 °C to 100 °C, indicating a successful implementation of micro-TME on individual microcuboid. For micro-SMPA functionalization, microcuboids were deformed by compression at 100 °C and the change in single particle height was monitored during cyclic heating and cooling between various Tseps from 60 °C to 85 °C and 20 °C. The micro-SMPA on a single microcuboid was achieved with a reversible strain in the range of 2 to 7%, whereby higher compression ratio CR and Tsep induced prominent reversible strain. The results achieved in this work demonstrated the successful functionalization of microcuboids with different SMEs by controlling temperatures during programming and actuation processes. Based on these achievements, such micro-objects can be further designed as on demand switchable microactuators or release systems with adjustable working temperatures.
In the last part of the work, a new function of shape-memory polymeric bi-stable 3D structured film was designed and fabricated. The SME and geometrical design of compliant mechanics were merged to enable switching between bi-stable and mono-stable states, which generate snap movement that mimics the Venus flytrap. A truncated tetrahedron structure with a slope angle as a tunable parameter to alter the bi-stability was chosen for the study to combine with
SME. It was anticipated that the structured film designed with a slope angle of 30° exhibited mono-stable behavior, and such a structure with a slope angle of 45° exhibited bi-stable behavior. Then the structured SMP film of designed mono-stable shape was successfully fabricated using soft lithography based on 3D printed master molds supported from digital manufacturing. The structured mold was also used in programming the SMP film into the structure with a higher slope angle to attain bi-stability. Finally, the switching between bi-stable and mono-stable states was successfully realized using SME, which introduces snapping movement triggered by heat. The implementation of compliant mechanisms by the SME increased the magnitude of thermally induced reconfiguration without additional external force.
To sum up, the results of the thesis support the development of smart objects capable of one-way micro-TME, free-standing reversible actuation, or bi-stability mediated shape-memory reconfiguration. Electrospinning and template-based method were used for fabrication with good control of geometry and low size dispersity. Microscopy methods especially the AFM platform with decent sensitivity was developed for implementation as well as characterization of SME on individual micro-/nanoobjects. Implementation of bi-stability improves the shape transformation amplitude of thermally triggered SMP. These findings can give novel insights for designing polymer-based actuators or soft robotics.
Monoklonale Antikörper sind essenzielle Werkzeuge in der modernen Laboranalytik sowie in der medizinischen Therapie und Diagnostik. Die Herstellung monoklonaler Antikörper ist ein zeit- und arbeitsintensiver Prozess. Herkömmliche Methoden beruhen auf der Immunisierung von Labortieren, die mitunter mehrere Monate in Anspruch nimmt. Anschließend werden die Antikörper-produzierenden B-Lymphozyten bzw. deren Antikörpergene isoliert und in Screening-Verfahren untersucht, um geeignete Binder zu identifizieren.
Der Transfer der humoralen Immunantwort in eine in vitro Umgebung erlaubt eine Verkürzung des Prozesses und umgeht die Notwendigkeit der in vivo Immunisierung. Das komplexe Zusammenspiel aller involvierten Immunzellen in vitro abzubilden, stellt sich allerdings als schwierig dar. Der Schwerpunkt dieser Arbeit war deshalb die Realisierung einer vereinfachten In vitro Immunisierung, die sich auf die Protagonisten der Antikörper-Produktion konzentriert: die B-Lymphozyten. Darüber hinaus sollte eine permanente Zelllinie etabliert werden, die zur Antikörper-Herstellung eingesetzt werden und die Verwendung von Primärzellen ersetzen würde.
Im ersten Teil der Arbeit wurde ein Protokoll zur In vitro Immunisierung muriner BLymphozyten etabliert. In Vorversuchen wurden die optimalen Konditionen für die Antigenspezifische Aktivierung gereinigter Milz-B-Lymphozyten aus nicht-immunisierten Mäusen
determiniert. Dazu wurde der Einfluss verschiedener Stimuli auf die Produktion unspezifischer und spezifischer Antikörper untersucht. Eine Kombination aus dem Modellantigen VP1 (Hamster Polyomavirus Hüllprotein 1), einem Anti-CD40-Antikörper, Interleukin 4 (IL 4) und Lipopolysaccharid (LPS) oder IL 7 induzierte nachweislich eine Antigen-spezifische Antikörper-Antwort in vitro. Als Indikatoren einer erfolgreichen Aktivierung der B-Lymphozyten infolge der in vitro Stimulation wurden die rapide Proliferation und die Expression charakteristischer Aktivierungsmarker auf der Zelloberfläche nachgewiesen. In einer Zeitreihe über zehn Tage wurde am zehnten Tag der In vitro Immunisierung die verhältnismäßig höchste Konzentration Antigen-spezifischer IgG-Antikörper im Kulturüberstand der stimulierten Zellen nachgewiesen.
Als nächster Schritt sollte eine permanente Zelllinie hergestellt werden, die statt primärer BLymphozyten für die zuvor etablierte In vitro Immunisierung eingesetzt werden könnte. Zu diesem Zweck wurden retrovirale Vektoren hergestellt, die durch den Transfer verschiedener Onkogene in murine B-Lymphozyten bzw. deren Vorläuferzellen das Proliferationsverhalten der Zellen manipulieren sollen. Es wurden Retroviren mit Doxycyclin-induzierbaren Expressionskassetten mit den Onkogenen cmyc, Bcl2, BclxL und dem Fusionsgen NUP98HOXB4 generiert. Eine Testzelllinie wurde erfolgreich mit den hergestellten Retroviren transduziert und die Funktionalität der hergestellten Viren anhand verschiedener Assays belegt. Die transferierten Gene konnten in der Testzelllinie auf DNAEbene nachgewiesen oder die Überexpression der entsprechenden Proteine im Western Blot detektiert werden. Es wurden schließlich B-Lymphozyten bzw. unreife Vorläuferzellen derselben mit den generierten Retroviren transduziert und mit Knochenmark-ähnlichen Stromazellen co-kultiviert. Aus keinem der transduzierten Ansätze konnte bisher eine Zelllinie oder eine Langzeit-Kultur etabliert werden.
Im letzten Teil der Arbeit wurde die Effektivität und Übertragbarkeit des zuvor etablierten Protokolls zur In vitro Immunisierung muriner B-Lymphozyten anhand verschiedener Antigene gezeigt. Es konnten in vitro spezifische IgG-Antworten gegen VP1, Legionella pneumophila und das Protein Mip, von dem ein Peptid in das zur Immunisierung eingesetzte VP1 integriert wurde, induziert werden. Die stimulierten B-Lymphozyten wurden durch Fusion mit Myelomzellen in permanente Antikörper-produzierende Zelllinien transformiert.
Dabei konnten mehrere Hybridomzelllinien generiert werden, die spezifische IgGAntikörper gegen VP1 oder Mip produzieren. Die generierten Antikörper konnten sowohl im Western Blot als auch im ELISA (Enzyme-Linked Immunosorbent Assay) das entsprechende Antigen spezifisch binden.
Die hier etablierte In vitro Immunisierung bietet eine effektive Alternative zu bisherigen Verfahren zur Herstellung spezifischer Antikörper. Sie ersetzt die Immunisierung von Versuchstieren und reduziert den Zeitaufwand erheblich. In Kombination mit der Hybridomtechnologie können die in vitro immunisierten Zellen, wie hier demonstriert, zur Generation von Hybridomzelllinien und zur Herstellung monoklonaler Antikörper genutzt werden. Um die Verwendung von Versuchstieren in dieser Methode durch eine adäquate permanente Zelllinie zu ersetzen, muss die genetische Veränderung von B-Lymphozyten und unreifen hämatopoetischen Zellen optimiert werden. Die Ergebnisse bieten eine Basis für eine universelle, Spezies-unabhängige Methodik zur Antikörperherstellung und für die
Etablierung einer idealen, tierfreien In vitro Immunisierung.
Bottom-up synthetic biology is used for the understanding of how a cell works. It is achieved through developing techniques to produce lipid-based vesicular structures as cellular mimics. The most common techniques used to produce cellular mimics or synthetic cells is through electroformation and swelling method. However, the abovementioned techniques cannot efficiently encapsulate macromolecules such as proteins, enzymes, DNA and even liposomes as synthetic organelles. This urges the need to develop new techniques that can circumvent this issue and make the artificial cell a reality where it is possible to imitate a eukaryotic cell through encapsulating macromolecules. In this thesis, the aim to construct a cell system using giant unilamellar vesicles (GUVs) to reconstitute the mitochondrial molybdenum cofactor biosynthetic pathway. This pathway is highly conserved among all life forms, and therefore is known for its biological significance in disorders induced through its malfunctioning. Furthermore, the pathway itself is a multi-step enzymatic reaction that takes place in different compartments. Initially, GTP in the mitochondrial matrix is converted to cPMP in the presence of cPMP synthase. Further, produced cPMP is transported across the membrane to the cytosol, to be converted by MPT synthase into MPT. This pathway provides a possibility to address the general challenges faced in the development of a synthetic cell, to encapsulate large biomolecules with good efficiency and greater control and to evaluate the enzymatic reactions involved in the process.
For this purpose, the emulsion-based technique was developed and optimised to allow rapid production of GUVs (~18 min) with high encapsulation efficiency (80%). This was made possible by optimizing various parameters such as density, type of oil, the impact of centrifugation speed/time, lipid concentration, pH, temperature, and emulsion droplet volume. Furthermore, the method was optimised in microtiter plates for direct experimentation and visualization after the GUV formation. Using this technique, the two steps - formation of cPMP from GTP and the formation of MPT from cPMP were encapsulated in different sets of GUVs to mimic the two compartments. Two independent fluorescence-based detection systems were established to confirm the successful encapsulation and conversion of the reactants. Alternatively, the enzymes produced using bacterial expression and measured. Following the successful encapsulation and evaluation of enzymatic reactions, cPMP transport across mitochondrial membrane has been mimicked using GUVs using a complex mitochondrial lipid composition. It was found that the cPMP interaction with the lipid bilayer results in transient pore-formation and leakage of internal contents.
Overall, it can be concluded that in this thesis a novel technique has been optimised for fast production of functional synthetic cells. The individual enzymatic steps of the Moco biosynthetic pathway have successfully implemented and quantified within these cellular mimics.
Elucidating the molecular basis of enhanced growth in the Arabidopsis thaliana accession Bur-0
(2021)
The life cycle of flowering plants is a dynamic process that involves successful passing through several developmental phases and tremendous progress has been made to reveal cellular and molecular regulatory mechanisms underlying these phases, morphogenesis, and growth. Although several key regulators of plant growth or developmental phase transitions have been identified in Arabidopsis, little is known about factors that become active during embryogenesis, seed development and also during further postembryonic growth. Much less is known about accession-specific factors that determine plant architecture and organ size. Bur-0 has been reported as a natural Arabidopsis thaliana accession with exceptionally big seeds and a large rosette; its phenotype makes it an interesting candidate to study growth and developmental aspects in plants, however, the molecular basis underlying this big phenotype remains to be elucidated. Thus, the general aim of this PhD project was to investigate and unravel the molecular mechanisms underlying the big phenotype in Bur-0.
Several natural Arabidopsis accessions and late flowering mutant lines were analysed in this study, including Bur-0. Phenotypes were characterized by determining rosette size, seed size, flowering time, SAM size and growth in different photoperiods, during embryonic and postembryonic development. Our results demonstrate that Bur-0 stands out as an interesting accession with simultaneously larger rosettes, larger SAM, later flowering phenotype and larger seeds, but also larger embryos. Interestingly, inter-accession crosses (F1) resulted in bigger seeds than the parental self-crossed accessions, particularly when Bur-0 was used as the female parental genotype, suggesting parental effects on seed size that might be maternally controlled. Furthermore, developmental stage-based comparisons revealed that the large embryo size of Bur-0 is achieved during late embryogenesis and the large rosette size is achieved during late postembryonic growth. Interestingly, developmental phase progression analyses revealed that from germination onwards, the length of developmental phases during postembryonic growth is delayed in Bur-0, suggesting that in general, the mechanisms that regulate developmental phase progression are shared across developmental phases.
On the other hand, a detailed physiological characterization in different tissues at different developmental stages revealed accession-specific physiological and metabolic traits that underlie accession-specific phenotypes and in particular, more carbon resources during embryonic and postembryonic development were found in Bur-0, suggesting an important role of carbohydrates in determination of the bigger Bur-0 phenotype. Additionally, differences in the cellular organization, nuclei DNA content, as well as ploidy level were analyzed in different tissues/cell types and we found that the large organ size in Bur-0 can be mainly attributed to its larger cells and also to higher cell proliferation in the SAM, but not to a different ploidy level.
Furthermore, RNA-seq analysis of embryos at torpedo and mature stage, as well as SAMs at vegetative and floral transition stage from Bur-0 and Col-0 was conducted to identify accession-specific genetic determinants of plant phenotypes, shared across tissues and developmental stages during embryonic and postembryonic growth. Potential candidate genes were identified and further validation of transcriptome data by expression analyses of candidate genes as well as known key regulators of organ size and growth during embryonic and postembryonic development confirmed that the high confidence transcriptome datasets generated in this study are reliable for elucidation of molecular mechanisms regulating plant growth and accession-specific phenotypes in Arabidopsis.
Taken together, this PhD project contributes to the plant development research field providing a detailed analysis of mechanisms underlying plant growth and development at different levels of biological organization, focusing on Arabidopsis accessions with remarkable phenotypical differences. For this, the natural accession Bur-0 was an ideal outlier candidate and different mechanisms at organ and tissue level, cell level, metabolism, transcript and gene expression level were identified, providing a better understanding of different factors involved in plant growth regulation and mechanisms underlying different growth patterns in nature.