Refine
Year of publication
Document Type
- Article (82)
- Postprint (15)
- Doctoral Thesis (1)
Is part of the Bibliography
- yes (98)
Keywords
- ionic liquids (6)
- Palladium (5)
- X-ray structure (5)
- crystal structure (5)
- Ionic liquids (4)
- Lactams (4)
- Carbene ligands (3)
- Structure elucidation (3)
- Synthetic methods (3)
- adsorption (3)
Institute
- Institut für Chemie (98) (remove)
A series of new monocationic iridium(III) complexes [Ir((CN)-N-boolean AND)(2)((NN)-N-boolean AND)]PF6 with "large-surface" alpha,alpha'-diimin ligands (NN)-N-boolean AND (dap = 1,12-diazaperylene, dmedap = 2,11-dimethyl-1,12-diazaperylene, dipdap = 2,11-diisopropyl-1,12-diazaperylene) and different cyclometalating ligands (CN)-N-boolean AND (piq = 1-phenylisoquinoline, bzq = benzo[h]quinoline, ppz = 1-phenylpyrazole, thpy = 2-(2-thienyl)pyridine, ppy = 2-phenylpyridine, meppy = 2-(4-methylphenyl)pyridine, dfppy = 2-(2,4-difluorophenyl)pyridine) were synthesized. The solid structures of the complexes [Ir(piq)(2)(dap)]PF6, [Ir(bzq)(2)(dap)]PF6, [Ir(ppy)(2)(dipdap)]PF6, [Ir(piq)(2)(dmedap)]PF6, [Ir(ppy)(2)(dap)]PF6 and [Ir(ppz)(2)(dap)]PF6 are reported. In [Ir(piq)(2)(dap)]PF6, the dap ligand and one of the piq ligands of each cationic complex are involved in pi-pi stacking interactions forming supramolecular channels running along the crystallographic c axis. In the crystalline [Ir(bzq)(2)(dap)]PF6 pi-pi stacking interactions between the metal complexes lead to the formation of a 2D layer structure. In addition, CH-pi interactions were found in all compounds, which are what stabilizes the solid structure. In particular, a significant number of them were found in [Ir(piq)(2)(dap)]PF6 and [Ir(bzq)(2)(dap)]PF6. The crystal structures of [Ir(ppy)(2)(dipdap)]PF6 and [Ir(ppy)(2)(dmedap)]PF6 are also presented, being the first examples of bis-cyclometalated iridium(III) complexes with phenanthroline-type alpha,alpha'-diimin ligands bearing bulky alkyl groups in the neighbourhood of the N-donor atoms. These ligands implicate a distorted octahedral coordination geometry that in turn destabilized the Ir-N-N boolean AND N bonds. The new iridium (III) complexes are not luminescent. All compounds show an electrochemically irreversible anodic peak between 1.15 and 1.58 V, which is influenced by the different cyclometalated ligands. All of the new complexes show two reversible successive one-electron "large-surface" ligand-centred reductions around -0.70 V and -1.30 V. Electrospray ionisation mass spectrometry (ESI-MS) and collision induced decomposition (CID) measurements were used to investigate the stability of the new complexes. Thereby, the stability agreed well with the order of the Ir-N-N boolean AND N bond lengths.
2,11-Dialkylated 1,12-diazaperylenes (alkyl = Me, Et, iPr) dmedap, detdap and dipdap have been synthesized by reductive cyclization of 3,3-dialkylated 1,1-biisoquinolines 3a-c, resulting in the first copper(I) complexes of a large- surface ligand. The new copper(I) complexes show low-energy MLCT absorptions unprecedented for bis(-diimin)copper(I) complexes. The solid structures of the complexes[Cu(dipdap)2]BF4·CH2Cl2·1.5H2O, [Cu(dipdap)2]OTf·CH2Cl2, [Cu(dipdap)2]I·C2H4Cl2·THF·2H2O, [Cu(dmedap)2]OTf and [Cu(dipdap)2]AQSO3·H2O (AQSO3 = sodium 9,10-dihydro-9,10-dioxo-2- anthracenesulfonate) are reported. In [Cu(dipdap)2]BF4·CH2Cl2·1.5H2O, each copper(I) complex cation interacts with two others by - stacking interactions forming a novel supramolecular column structural motif running along the crystallographic c axis. In the crystalline compound [Cu(dipdap)2]AQSO3·H2O, aggregation between two complex cations and two additional anions by - stacking interactions is observed, leading to a tetrameric assembly. Furthermore, the three complex compounds [Cu(L)2]BF4 (L = dmedap, detdap, dipdap) were tested for sensory applications in aqueous buffer solutions in electrochemical studies of the complex immobilized on glassy carbon electrodes.
A series of 9,10-diarylanthracenes with various substituents at the ortho positions have been synthesised by palladium-catalysed cross-coupling reactions. Such compounds exhibit interesting physical properties and can be applied as molecular switches. Despite the high steric demand of the substituents, products were formed in moderate-to-good yields. In some cases, microwave conditions further improved yields. Bis-coupling afforded two isomers (syn and anti) that do not interconvert at room temperature. These products were easily separated and their relative stereochemistries were unequivocally assigned by NMR spectroscopy and X-ray analysis. The syn and anti isomers exhibit different physical properties (e.g., melting points and solubilities) and interconversion by rotation around the aryl-aryl axis commences at <100 °C for fluoro-substituted diarylanthracenes and at >300 °C for alkyl- or alkoxy-substituted diarylanthracenes. The reactions with singlet oxygen were studied separately and revealed different reactivities and reaction pathways. The yields and reactivities depend on the size and electronic nature of the substituents. The anti isomers form the same 9,10-endoperoxides as the syn species, occasionally accompanied by unexpected 1,4-endoperoxides as byproducts. Thermolysis of the endoperoxides exclusively yielded the syn isomers. The interesting rotation around the aryl-aryl axis allows the application of 9,10-diarylanthracenes as molecular switches, which are triggered by light and air under mild conditions. Finally, the oxygenation and thermolysis sequence provides a simple, synthetic access to a single stereoisomer (syn) from an unselective coupling step.
Planar bis(1,2-dithiooxalato)nickelate(II), [Ni(dto)]2− reacts in aqueous solutions with lanthanide ions (Ln3+) to form pentanuclear, hetero-bimetallic complexes of the general composition [{Ln(H2O)n}2{Ni(dto)2}3]·xH2O. (n = 4 or 5; x = 9–12). The complex [{Ho(H2O)5}2{Ni(dto)2}3]·10H2O, Ho2Ni3, was synthesized and characterized by single crystal X-ray structure analysis and powder diffraction. The Ho2Ni3 complex crystallizes as monoclinic crystals in the space group P21/c. The channels and cavities, appearing in the crystal packing of the complex molecules, are occupied by a varying amount of non-coordinated water molecules.
A protected derivative of (3R, 4R)-hexa-1,5-diene-3,4-diol, a conveniently accessible C-2-symmetric building block, undergoes single or double cross metathesis with methyl acryl-ate. The cross metathesis products are amenable to stereoselective conjugate addition reactions and can be converted into either gamma-butyrolactones or gamma-lactams.
The synthesis and single crystal X-ray structures of eight AgI, HgII, and PtII complexes with the thiacrown ethers maleonitrile-tetrathia-12-crown-4 (mn12S4), maleonitrile-tetrathia-13-crown-4 (mn13S4), and maleonitrile- pentathia-15-crown-5 (mn15S5) (1) are reported. The ligand mn15S5 was synthesized for the first time and characterized by X-ray diffraction. With silver(I) perchlorate and silver(I) tetrafluoroborate it forms the chiral complexes [Ag(mn15S5)]ClO4·CH3NO2 (2) and [Ag(mn15S5)]BF4·CH3NO2·0.25H2O (3) with half-sandwich moieties. AgI is located in a distorted tetrahedral coordination environment, involving three sulfur atoms of the crown cycle and a fourth one of the adjacent half-sandwich moiety, forming a helical structure. The reaction of Hg(ClO4)2 with mn13S4 yielded the dinuclear complex [Hg2(mn13S4)3](ClO4)4 (4) containing two half-sandwich moieties with a third ligand molecule as a bridging unit. Mercury(II) chloride and mercury(II) iodide react with mn12S4 and mn13S4 to form complexes of the general composition [HgX2(L)] (X = Cl, I; L = mn12S4, mn13S4): [HgCl2(mn12S4)] (5), [HgI2(mn12S4)] (6), [HgCl2(mn13S4)] (7) or [HgX2(L)2] (X = I; L = mn13S4): [HgI2(mn13S4)2] (8). Only one or two sulfur atoms of the ligand are involved in the complexation, and chain or ribbon structures are formed. In these compounds the HgX2 units (X = Cl, I) are preserved, coordinated by sulfur atoms of bridging mn12S4 or mn13S4 ligands. In all complexes of this type, the metal atoms are not coordinated inside the cavity, but in an exocyclic mode, because the diameter of the macrocycle is too small. Additionally, the PtCl2 complex of mn12S4 was investigated, where PtII is coordinated in an exocyclic mode forming the complex [PtCl2(mn12S4)] (9). Two of the four sulfur atoms of the macrocycle are bonded to the metal giving together with both chlorine atoms a square-planar coordination geometry. Together with a long-range interaction with a further sulfur atom of the macrocycle a square-pyramidal coordination environment is formed.
Six N-alkylpyridinium salts [CnPy](2)[MCl4] (n = 4 or 12 and M = Co, Cu, Zn) were synthesized, and their structure and thermal properties were studied. The [C4Py](2)[MCl4] compounds are monoclinic and crystallize in the space group P2(1)/n. The crystals of the longer chain analogues [C12Py](2)[MCl4] are triclinic and crystallize in the space group P (1) over bar. Above the melting temperature, all compounds are ionic liquids (ILs). The derivatives with the longer C12 chain exhibit liquid crystallinity and the shorter chain compounds only show a melting transition. Consistent with single-crystal analysis, electron paramagnetic resonance spectroscopy suggests that the [CuCl4](2-) ions in the Cu-based ILs have a distorted tetrahedral geometry.
Six N-alkylpyridinium salts [CnPy](2)[MCl4] (n = 4 or 12 and M = Co, Cu, Zn) were synthesized, and their structure and thermal properties were studied. The [C4Py](2)[MCl4] compounds are monoclinic and crystallize in the space group P2(1)/n. The crystals of the longer chain analogues [C12Py](2)[MCl4] are triclinic and crystallize in the space group P (1) over bar. Above the melting temperature, all compounds are ionic liquids (ILs). The derivatives with the longer C12 chain exhibit liquid crystallinity and the shorter chain compounds only show a melting transition. Consistent with single-crystal analysis, electron paramagnetic resonance spectroscopy suggests that the [CuCl4](2-) ions in the Cu-based ILs have a distorted tetrahedral geometry.
In this work, three ligands produced from amino acids were synthesized and used to produce five bis- and PEPPSI-type palladium-NHC complexes using a novel synthesis route from sustainable starting materials. Three of these complexes were used as precatalysts in the aqueous-phase Suzuki-Miyaura coupling of various substrates displaying high activity. TEM and mercury poisoning experiments provide evidence for Pd-nanoparticle formation stabilized in water.
In this work, three ligands produced from amino acids were synthesized and used to produce five bis- and PEPPSI-type palladium–NHC complexes using a novel synthesis route from sustainable starting materials. Three of these complexes were used as precatalysts in the aqueous-phase Suzuki–Miyaura coupling of various substrates displaying high activity. TEM and mercury poisoning experiments provide evidence for Pd-nanoparticle formation stabilized in water.
An asymmetric variant of the dehydro-Diels-Alder (DDA) reaction has been developed and applied in the atropselective synthesis of various (1,5)naphthalenophanes. Whereas the suitability of the photochemically induced DDA (PDDA) was limited, the thermally induced DDA provided the desired product, depending on the chiral auxiliary used and the length of the linker, with nearly perfect stereoselectivity. Furthermore, the mechanism of the DDA was investigated by means of DFT calculations, and a stepwise mechanism involving 1,4-biradicals was suggested.
A convenient method for the synthesis of γ-spirolactones in only 2–3 steps is described. Birch reduction of inexpensive and commercially available aromatic carboxylic acids in the presence of ethylene oxide affords hydroxy acids, which undergo direct lactonization during work-up. Suitable precursors are methyl-substituted benzoic acids, naphthoic, and dicarboxylic acids. Subsequent hydrogenation proceeds smoothly with Pd/C as catalyst and saturated γ-spirolactones are isolated in excellent yields and stereoselectivities. Thus, up to 3 new stereogenic centers can be constructed as sole diastereomers from achiral benzoic acids. Furthermore, it is possible to control the degree of saturation with Raney nickel or Wilkinson's catalyst to obtain products with 1 double bond. Overall, more than 30 new γ-spirolactones have been synthesized in analytically pure form.
1,2-Dithiosquaratonickelates are available by direct synthesis from metal salts with dipotassium-1,2-dithiosquarate and the appropriate counter cations. The synthesis and characterization, including mass spectrometry, of a series 1,2-dithiosquaratonickelates(II), [Ni(dtsq)(2)](2-), with several "onium" cations is reported and the X-ray structures of two diamagnetic complexes, (HexPh(3)P)(2)[Ni(dtsq)(2)] and (BuPh3P)(2)[Ni(dtsq)(2)] with sterically demanding counter ions are presented. The diamagnetic nickel complexes have been doped as host lattices with traces of Cu(II) to measure EPR for additional structural information. The thermal behavior of this series is studied by thermogravimetry and differential thermal analysis (TG/DTA). The thermolysis in air as well as under nitrogen atmosphere of these complexes results in nickel oxide nano-particles in all cases, which are characterized by X-ray powder diffraction.
There is a demand for new and robust PdII extractants due to growing recycling rates. Chelating dithioethers are promising substances for solvent extraction as they form stable square-planar complexes with PdII. We have modified unsaturated dithioethers, which are known to coordinate PdII, and adapted them to the requirements of industrial practice. The ligands are analogues of 1,2-dithioethene with varying electron-withdrawing backbones and polar end-groups. The crystal structures of several ligands and their palladium complexes were determined as well as their electro- and photochemical properties, complex stability and behaviour in solution. Solvent extraction experiments showed the superiority of some of our ligands over conventionally used extractants in terms of their very fast reaction rates. With highly selective 1,2-bis(2-methoxyethylthio)benzene (4) it is possible to extract PdII from a highly acidic medium in the presence of other base and palladium-group metals.