Refine
Year of publication
Document Type
- Article (86)
- Postprint (9)
- Monograph/Edited Volume (1)
- Other (1)
- Review (1)
Language
- English (98) (remove)
Is part of the Bibliography
- yes (98) (remove)
Keywords
- fluorescence (7)
- Palladium (6)
- fluorescent probes (6)
- potassium (6)
- crown compounds (5)
- adsorption (4)
- metal-organic frameworks (4)
- sensors (4)
- Carbene ligands (3)
- Platinum group metals (3)
Institute
- Institut für Chemie (98) (remove)
A desirable goal is to synthesize easily accessible and highly K+/Na+-selective fluoroionophores to monitor physiological K+ levels in vitro and in vivo. Therefore, highly K+/Na+-selective ionophores have to be developed. Herein, we obtained in a sequence of only four synthetic steps a set of K+-responsive fluorescent probes 4, 5 and 6. In a systematic study, we investigated the influence of the alkoxy substitution in ortho position of the aniline moiety in -conjugated aniline-1,2,3-triazole-coumarin-fluoroionophores 4, 5 and 6 [R=MeO (4), EtO (5) and iPrO (6)] towards the K+-complex stability and K+/Na+ selectivity. The highest K+-complex stability showed fluoroionophore 4 with a dissociation constant K-d of 19mm, but the K-d value increases to 31mm in combined K+/Na+ solutions, indicating a poor K+/Na+ selectivity. By contrast, 6 showed even in the presence of competitive Na+ ions equal K-d values (K-d(K+)=45mm and K-d(K+/Na+)=45mm) and equal K+-induced fluorescence enhancement factors (FEFs=2.3). Thus, the fluorescent probe 6 showed an outstanding K+/Na+ selectivity and is a suitable fluorescent tool to measure physiological K+ levels in the range of 10-80mm in vitro. Further, the isopropoxy-substituted N-phenylaza[18]crown-6 ionophore in 6 is a highly K+-selective building block with a feasible synthetic route.
An extended member of the isoreticular family of metal-imidazolate framework structures, IFP-6 (IFP=imidazolate framework Potsdam), based on cadmium metal and an in situ functionalized 2-methylimidazolate-4-amide-5-imidate linker is reported. A porous 3D framework with 1D hexagonal channels with accessible pore windows of 0.52nm has been synthesized by using an ionic liquid (IL) linker precursor. IFP-6 shows significant gas uptake capacity only for CO2 and CH4 at elevated pressure, whereas it does not adsorb N-2, H-2, and CH4 under atmospheric conditions. IFP-6 is assumed to deteriorate at the outside of the material during the activation process. This closing of the metal-organic framework (MOF) pores is proven by positron annihilation lifetime spectroscopy (PALS), which revealed inherent crystal defects. PALS results support the conservation of the inner pores of IFP-6. IFP-6 has also been successfully loaded with luminescent trivalent lanthanide ions (Ln(III)=Tb, Eu, and Sm) in a bottom-up one-pot reaction through the in situ generation of the linker ligand and in situ incorporation of photoluminescent Ln ions into the constituting network. The results of photoluminescence investigations and powder XRD provide evidence that the Ln ions are not doped as connectivity centers into the frameworks, but are instead located within the pores of the MOFs. Under UV light irradiation, Tb@IFP-6 and Eu@IFP-6 ((exc)=365nm) exhibit observable emission changes to a greenish and reddish color, respectively, as a result of strong Ln 4f emissions.
A series of three dialkyl phosphate resins with a Merrifield resin support was used to extract platinum from acidic media. In column operations total capacities of 85-130 mg/g were gained. The presence of palladium and rhodium results in the order: Pt(IV) > Pd(II) >> Rh(III). From a leach liquor gained from spent automotive catalysts metals forming anionic chloro complexes are co-extracted only to a small extent. However, in order to separate and enrich platinum a selective back-extraction can be done with a sodium thiocyanate solution. A second elution step with acidic thiourea leads to a mixed solution of palladium and rhodium.
Porphyrin substituent regiochemistry, conformation and packing - the case of 5,10-diphenylporphyrin
(2015)
5,10-Disubstituted porphyrins are more recent additions to the family of meso-substituted porphyrins. A crystallographic comparison of 5,10-diphenylporphyrin with the regioisomeric 5,15-disubstituted system reveals striking differences in their conformation. In the free base porphyrins the former uses mainly out-of-plane distortion to alleviate steric strain while in-plane core elongation predominates in the latter. In contrast, the structure of the Cu(II) complex is planar and forms strong p-p aggregates with very small lateral shifts. Macroscopically, the packing is similar to that of porphyrin sponges of the 5,10,15,20-tetraphenylporphyrin type.
The PEPPSI (Pyridine Enhanced Precatalyst Preparation, Stabilization and Initiation) complexes 12-15 with the structure [PdCl2{(CN)(2)IMes}(3-R-py)] (12: R = H; 13: R = Cl; 14: R = Br; 15: R = CN) bearing the maleonitrile-based N-heterocyclic carbene (NHC) (CN)(2)IMes ({(CN)(2)IMes}: 4,5-dicyano-1,3-dimesitylimidazol-2-ylidene) were prepared. Solid state structures of 14 and 15 were obtained. Complexes 14 and 15 adopt a slightly distorted square-planar coordination geometry in the solid state with the substituted pyridine ligand trans to the NHC. Catalytic activities of precatalysts 12-15 were studied and subsequently compared to complexes [PdCl2{(CN)(2)IMes}(PPh3)] (4) and [PdCl(dmba){(CN)(2)IMes}] (5) recently reported by our group in the Suzuki-Miyaura reaction of various aryl halides and phenylboronic acid. Reactions using previously reported [PdCl2(IMes)(py)] (IMes: 1,3-dimesitylimidazol-2-ylidene) (1) were also carried out and their results contrasted to those involving 12-15, 4 and 5. Differences in initiation rates and the catalytically active species related to the seven complexes in regards to the throw away ligand were investigated. Poisoning experiments with mercury show that palladium nanoparticles are responsible for the catalytic activity.
A simple and straightforward approach to new polymetallic Ag-I and Cu-I supramolecules is presented. The reaction of N,P,N,P,N ligand 2 with Ag-I ions affords a trimetallic complex bearing a triangular Ag-3 core; metallophilic interactions are stabilized by ligands that display a multiple bridging coordination mode as 10-electron donors. Heteroleptic polymetallic Ag-I and Cu-I complexes based on ligand 2 and the 1,12-diazaperylene (dape) ligand are obtained by an alternative molecular organization of the polymetallic arrays compared to that in homoleptic complexes of ligand 2.
The present study deals with the adsorption performance of fixed bed columns using powdered sulphoxide modified poly(styrene-co-divinylbenzene) (d(10) < 13 mu m, d(50) < 30 mu m, d(90) < 50 mu m) for the separation of platinum and ruthenium from hydrochloric acidic solutions containing both metals (c(Pt) = 20 mg/L, c(Ru) = 10 mg/L). The influence of hydrochloric acid concentration, temperature, flow rate, flow direction, redox potential and bed height on the breakthrough characteristics was examined. Platinum was separately adsorbed mainly induced by hydrochloric acid concentration and redox potential keeping platinum as Pt-IV and ruthenium as Ru-III. Ruthenium was separately adsorbed to 90% essentially induced by hydrochloric acid concentration, temperature and redox potential keeping platinum as Pt-IV and ruthenium predominantly as Ru-IV. Experimental data at optimised separation conditions were fitted to different kinetic models (Thomas, Yoon-Nelson, Bohart-Adams, Wolborska) to characterise the fixed bed column behaviour. Adsorption of both metals was well described by Thomas and Yoon-Nelson model with correlation coefficients R-2 >= 0.95 whereas Bohart-Adams and Wolborska model were less suitable. (C) 2015 Elsevier B.V. All rights reserved.
A highly K+-selective two-photon fluorescent probe for the in vitro monitoring of physiological K+ levels in the range of 1-100 mM is reported. The two-photon excited fluorescence (TPEF) probe shows a fluorescence enhancement (FE) by a factor of about three in the presence of 160 mM K+, independently of one-photon (OP, 430 nm) or two-photon (TP, 860 nm) excitation and comparable K+-induced FEs in the presence of competitive Na+ ions. The estimated dissociation constant (K-d) values in Na+-free solutions (K-d(OP)=(28 +/- 5) mM and K-d(TP)=(36 +/- 6) mM) and in combined K+/Na+ solutions (K-d(OP)=(38 +/- 8) mM and K-d(TP)=(46 +/- 25) mM) reflecting the high K+/Na+ selectivity of the fluorescent probe. The TP absorption cross-section (sigma(2PA)) of the TPEF probe+160 mMK(+) is 26 GM at 860 nm. Therefore, the TPEF probe is a suitable tool for the in vitro determination of K+.
Cadmium(II) based 2D coordination polymer [Cd(L1)(2)(DMF)(2)] (1) (L1 = 4,5-dicyano-2-methylimidazolate, DMF = N,N'-dimethylformamide) and 2D cobalt(II)-imidazolate framework [Co(L3)(4)] (2) (L3 = 4,5-diamide-2-ethoxyimidazolate) were synthesized under solvothermal reaction conditions. The materials were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X-ray diffraction measurement (PXRD) and single-crystal X-ray diffraction. Compound 1 has hexacoordinate Cd-II ions and forms a zigzag chain-like coordination polymer structure, whereas compound 2 exhibits a 2D square grid type structure. The thermal stability analysis reveals that 2 showed an exceptional thermal stability up to 360 degrees C. Also, 2 maintained its fully crystalline integrity in boiling water as confirmed by PXRD. The solid state luminescent property of 1 was not observed at room temperature. Compound 2 showed an independent high spin central Co-II atom.
In this work, we report three isostructural 3D frameworks, named IFP-11 (R = Cl), IFP-12 (R = Br), and IFP-13 (R = Et) (IFP = Imidazolate Framework Potsdam) based on a cobalt(II) center and the chelating linker 2-substituted imidazolate-4-amide-5-imidate. These chelating ligands were generated in situ by partial hydrolysis of 2-substituted 4,5-dicyanoimidazoles under microwave (MW)-assisted conditions in DMF. Structure determination of these IFPs was investigated by IR spectroscopy and a combination of powder X-ray diffraction (PXRD) with structure modeling. The structural models were initially built up from the single-crystal X-ray structure determination of IFP-5 (a cobalt center and 2-methylimidazolate-4-amide-5-imidate linker based framework) and were optimized by using density functional theory calculations. Substitution on position 2 of the linker (R = Cl, Br, and Et) in the isostructural IFP-11, -12, and -13 allowed variation of the potential pore window in 1D hexagonal channels (3.8 to 1.7 angstrom A). The potential of the materials to undergo specific interactions with CO2 was measured by the isosteric heat adsorption. Further, we resynthesized zinc based IFPs, namely IFP-1 = Me), IFP-2 (R = Cl), IFP-3 (R = Br), and IFP-4 (R = Et), and cobalt based IFP-5 under MW-assisted conditions with higher yield. The transition from a nucleation phase to the pure crystalline material of IFP-1 in MW-assisted synthesis depends on reaction time. IFP-1, -3, and -5, which are synthesized by MW-assisted conditions, showed an enhancement of N-2 and CO2, compared to the analogous conventional electrical (CE) heating method based materials due to crystal defects.
In this review article, we highlight the synthesis, structures and gas-sorption properties of a series of nine isostructural IFPs (IFP = Imidazolate Framework Potsdam) and two H-bonded networks. IFPs were synthesized by in situ partial hydrolysis of a 4,5-dicyanoimidazole under solvothermal conditions and hence an imidazolate-4-amide-5-imidate linker (C5H3N4O2) was generated, forming the metal -amide-imidate-imidazolateframeworks [M(C5H3N4O2)-R]. Varying R in the 2-substitued linker (R = Me, Cl, Br, Et, OMe and OEt) and metal centre (M2+ = zinc and cobalt) allowed the variation in channel diameter (4.2-03 angstrom) and a fine-tuning of the polarity and functionality of the channel walls of IFPs. Furthermore, we show that using ethyl or alkoxy substituted IFPs the flexible groups act as molecular gates for guest molecules. This allows highly selective CO2 sorption over Ny and CH4 gases. Moreover, during the synthesis of methoxy substituted IFPs (IFP-7 and -8), an imidazolate-4,5-diamide-2-olate linker (C5H4N4O3) formed in situ leads to the formation of a molecular building block (MBB) with a M-6 octahedron inscribed in a M-8 cube (M Zn2+ and Co2+). The MBBs connect by amide amide hydrogen bonds to a 3D robust supramolecular networks [Zn-14(C5H4N4O3)(12)(O) (OH)(2) (DMF)(4) denoted as 1 and 2, respectively, DMF = N,N'-dimethylformamide], which can be activated for N-2, CO2, CH4, and H-2 gas-sorption. (C) 2015 Elsevier Inc. All rights reserved.
A Co(II)-imidazolate-4-amide-5-imidate based MOF, IFP-5, is synthesized by using an imidazolate anion-based novel ionic liquid as a linker precursor under solvothermal conditions. IFP-5 shows significant amounts of gas (N-2, CO2, CH4 and H-2) uptake capacities. IFP-5 exhibits an independent high spin Co(II) centre and antiferromagnetic coupling.
We report a 1,2,3-triazol fluoroionophore for detecting Na+ that shows in vitro enhancement in the Na+-induced fluorescence intensity and decay time. The Na+-selective molecule 1 was incorporated into a hydrogel as a part of a fiber optical sensor. This sensor allows the direct determination of Na+ in the range of 1-10 mM by measuring reversible fluorescence decay time changes.
In situ imidazolate-4,5-diamide-2-olate linker generation leads to the formation of a [Zn-14(L2)(12)(O)-(OH)(2)(H2O)(4)] molecular building block (MBB) with a Zn-6 octahedron inscribed in a Zn-8 cube. The MBBs connect by amide-amide hydrogen bonds to a 3D robust supramolecular network which can be activated for N-2, CO2, CH4, and H-2 gas sorption.