Refine
Year of publication
- 2006 (10) (remove)
Document Type
- Doctoral Thesis (8)
- Article (1)
- Postprint (1)
Language
- German (10) (remove)
Is part of the Bibliography
- yes (10)
Keywords
- ATRP (1)
- Aggregate (1)
- Biomineralisation (1)
- Blockcopolymer (1)
- Calciumcarbonat (1)
- Chitin (1)
- Chitinasen (1)
- Makroinitiator (1)
- Mesoskalentransformation (1)
- N-Acetyl-chitooligosaccharide (1)
Institute
- Institut für Chemie (10) (remove)
Die Anwendung zweier ähnlicher fasergekoppelte Diodenlaser-Spektrometer-Systeme werden vorgestellt. Basis sind handelsübliche DFB-Laserdioden der optischen Kommunikationstechnik. Der faseroptische Aufbau, das Detektionsverfahren (2f Wellenlängenmodulations-Spektroskopie mit Balanced Receiver), Rauschverhalten und Detektionslimit werden diskutiert. Zur in-situ Plasma-Diagnostik von CO- und CO2-Konzentrationen in industriellen CO2-Lasern der Materialbearbeitung wurde eine Wellenlänge von 1582 nm verwendet. Bei einem Gasdruck von 100 hPa und einer Absorptionsweglänge von 14,9 cm wurden mit einer Laserdiode simultan CO- und CO2-Konzentrationen von 0% bis 11% im Gasgefäß bei laufender Hochfrequenzgasentladung des CO2-Lasers zeitaufgelöst gemessen. Vorgestellt und diskutiert werden Aufbau und Eigenschaften des Spektrometers sowie die Ergebnisse der dynamischen Gasanalysen, die zu einer Verbesserung der Katalysator-Technik im CO2-Laser beigetragen haben.Mit isotopenaufgelöster CO- und CO2-Spektroskopie können biologische Gasaustauschprozesse, z.B. in Gasen aus dem Erdboden untersucht werden. Hierzu wurde ein fasergekoppeltes feldtaugliches Diodenlaser-Spektrometer bei Wellenlängen um 1605 nm zur Messungder Isotopologe 12C16O, 13C16O, 12C18O und 12C16O2, 13C16O2, 12C18O16O aufgebaut. Die Messung erfolgt extraktiv in Langwegzellen mit unterschiedlichen Absorptionsweglängen von 100.9 m und 29.9 m. Es werden Kalibrationsmessungen zur Linearität und zur Präzision der Bestimmung der Isotopenverhältnisse sowie Wiederholungsmessungen zur Stabilität vorgestellt. Nachweisgrenzen von wenigen ppm konnten für die CO- und CO2-Isotopologen erhalten werden.
Chitin ist ein Polysaccharid, welches aus N-Acetylglucosamin (GlcNAc) aufgebaut ist. Das Biopolymer kommt in der Natur in Invertebraten, Algen, Pilzen und Einzellern vor. Chitinasen hydrolysieren Chitin. Diese Enzyme sind essentiell für die Regulierung und Entwicklung von Arthropoden und Mikroorganismen. Sie fungieren in Pflanzen als Phytoalexine. Das verstärkt das Interesse am Design neuer natürlicher und synthetischer Chitinase-inhibitoren, die als potentielle Insektizide, Fungizide, Antimalaria bzw. Antiasthmatika eingesetzt werden können. Ziel dieser Arbeit war die Synthese von neuen Thioglycosidanaloga von N-Acetyl-chitooligosacchariden und deren Untersuchung als Enzyminhibitoren. Die geschützten 4-O-Tf-galactopyranosylthioglycoside wurden aus den korrespondierenden p-Methoxyphenylglycosiden von GlcNAc nach einer neuen Methode in einer Stufe hergestellt. Die Reaktion der galacto-Triflate mit 2-Acetamido-3,4,6-tri-O-acetyl-2-desoxy-1-thio-ß-D-glucopyranose in Gegenwart von Natriumhydrid und 15-Krone-5 in THF lieferte die Pseudo-Trisaccharide. Die Herstellung der Glycosyl-Thiazoline aus den entsprechenden p-Methoxyphenyl-glycosiden mit Lawesson's Reagenz ist nach einem neuen Reaktionsweg beschrieben wie auch die Synthese der Thioacetamide von GlcNAc-Oligomeren. Die Pseudo-Oligosaccharide wurden als Inhibitoren der Chitinasen von Serratia marcescens, Chironomus tentans, Acanthocheilonema viteae und Hevaea brasiliensis sowie der N-Acetyl-glucosaminidase von Chironomus tentans getestet. In einigen Fällen ergab sich eine Hemmung (IC50) im µM-Bereich.
Es wurden Poly(2-isopropyl-2-oxazolin)-Makroinitiatoren mit terminaler Ammoniumtrifluoracetat-Endgruppe synthetisiert, die anschließend für die Ammonium vermittelte NCA Polymerisation in NMP eingesetzt wurden. Die hierbei synthetisierten Poly(2-isopropyl-2-oxazolin)-block-poly(L-glutamat) (PIPOX-PEP) Blockcopolymere hatten eine Molekulargewichtsverteilung von 1,2 (UZ). Es wurde beobachtet, dass Poly(2-isopropyl-2-oxazolin) bei langen Zeiten oberhalb der LCST irreversibel sphärische Strukturen bildet, die eine hierarchische Struktur besitzen und bei denen es sich möglicherweise um "large compound micelles" handelt. PIPOX-PEP kann in wässeriger Lösung bei langen Zeiten oberhalb der LCST "cottonball" Strukturen bilden. Die Aggregate wurden mittels Lichtstreuung, NMR und TEM charakterisiert. Im Rahmen der Arbeit wurden Strukturbildungsmodelle entwickelt.
Bioorganisch-synthetische Blockcopolymere sind sowohl für die Materialwissenschaft als auch für die Medizin hochinteressant. Diese Arbeit beschäftigte sich mit neuen Synthesewegen für die Herstellung dieser Blockcopolymere. Zunächst wurde der klassische Ansatz zur Herstellung eines Blockcopolymers über die Kupplung der beiden Segmente aufgegriffen. Hierzu wurde eine Methode zur Synthese von selektiv säureendfunktionalisierten Polyacrylaten mittels einer terminalen Benzylesterschutzgruppe vorgestellt. Für die Herstellung von bioorganisch-synthetischen Blockcopolymeren mit einem größeren Polymersegment wurde daher ein anderer Syntheseansatz entwickelt. Dieser geht von einem funktionalisierten Oligopeptid aus, an dem durch Polymerisation das synthetische Segment aufgebaut wird. Der Aufbau erfolgte durch kontrolliert radikalische Polymerisation, um ein möglichst definiertes Segment zu erhalten. Zunächst wurde eine Synthese von Oligopeptid-Makroinitiatoren für die ATRP-Polymerisation durchgeführt. Es konnte gezeigt werden, dass in geeigneten polaren Lösungsmitteln (DMSO, DMF) eine Polymerisation mit dem ATRP-Oligopeptid-Makroinitiator erfolgreich ist. Allerdings treten während der Polymerisation Wechselwirkungen zwischen dem Katalysator und dem Oligopeptid auf. Eine Alternative bietet die RAFT-Polymerisation, da sie ohne einen Katalysator durchgeführt wird. Es gelang ausgehend von dem Oligopeptid-ATRP-Makroinitiator den Überträger herzustellen. Die RAFT-Polymerisation mit einem Oligopeptidüberträger stellt eine wichtige Methode für die Herstellung von bioorganisch-synthetischen Blockcopolymeren dar. Sie besitzt eine hohe Toleranz gegenüber funktionellen Gruppen. Die so hergestellten Blockcopolymere sind frei von Verunreinigungen, wie z.B. Übergangsmetallen. Dabei läßt sich das Molekulargewicht des synthetischen Blocks bei einer Polydispersität um 1,2 gut kontrollieren.
Retrosynthese von Perlmutt
(2006)
In dieser Arbeit ist es gelungen, die Bedeutung physikalisch-chemischer Mechanismen in der Biomineralisation gegenüber der bisher angenommenen Dominanz spezifischer biomolekularer Erkennungsmechanismen aufzuzeigen. Dazu wurden drei Ansätze verfolgt: Zum einen wurden Studien zur Calciumcarbonatkristallisation durchgeführt. Zum anderen wurde das Biomineral Perlmutt intensiv untersucht. Als drittes wurde ein Modellsystem entwickelt, mit dem künstliches Perlmutt synthetisiert und ein Mechanismus für die Perlmuttmineralisation vorgeschlagen werden konnte. Im ersten Schritt wurden in einem simplen Kristallisationsansatz komplexe Calciumcarbonatüberstrukturen ohne die Verwendung von Additiven synthetisiert. Es wurde gezeigt, daß diese durch orientierte Anlagerung von Nanopartikeln gebildet werden, bei der dipolare Felder eine wichtige Rolle zu spielen scheinen. Dieser Mechansimus war bislang für Calciumcarbonat unbekannt und ermöglicht die Synthese komplexer Kristallmorphologien, wodurch die Frage aufgeworfen wird, ob er bei der Biomineralbildung von Bedeutung sein kann. Durch Einsatz minimaler Mengen eines einfachen, synthetischen Additivs bei der Kristallisation wurden zu Überstrukturen angeordnete Aragonitplättchen synthetisiert, die von einer wenige nm dicken Schicht aus amorphen Calciumcarbonat umgeben sind. Eine solche Schicht wurde auch bei den Aragonitplättchen Perlmutts entdeckt (s.u.) und bietet möglicherweise in verschiedenen Systemen eine Erklärung für die Stabilisierung der sonst metastabilen Aragonitphase. Im zweiten Schritt wurden bei der Untersuchung von natürlichem Perlmutt zwei bislang unbekannte Strukturmerkmale entdeckt: Es gibt Bereiche, die nicht aus den charakteristischen Plättchen bestehen, sondern wesentlich weniger stark mineralisert sind. Die Mineralphase besteht in diesen Bereichen aus Nanopartikeln. Es wurde weiterhin gezeigt, daß die Aragonitplättchen von einer wenige nm dicken Schicht aus amorphem Calciumcarbonat umgeben ist. Die gängigen Modelle der Perlmuttbildung sind mit diesen Beobachtungen nicht zu vereinbaren und somit zu hinterfragen. Dagegen deuten diese Ergebnisse ein Wachstum von Perlmutt über ACC-Nanopartikel an. Unter der Annahme der Bedeutung physikalisch-chemischer Mechanismen in der Biomineralisation wurde schließlich als dritter Schritt ein Ansatz zur in vitro-Retrosynthese von Biomineralien ausgehend von ihrer unlöslichen Matrix entwickelt. Mit diesem Ansatz ist es erstmals gelungen, künstliches Perlmutt auf synthetischem Wege herzustellen, das morphologisch nicht vom Original zu unterscheiden ist. Die existierenden Unterschiede konnten zeigen, daß der Mineralisationsprozeß nicht auf ein spezifisches Mikroumgebungssystem beschränkt, sondern "allgemeiner gültig"' sein muß. Bei der Retrosynthese gibt es zwei Schlüsselfaktoren: Zum einen die demineralisierte unlösliche Perlmuttmatrix als dreidimensionales Gerüst für das künstliche Perlmutt, zum anderen amorphe Precursorpartikel, die die Mineralphase bilden. Es werden keinerlei Proteine oder andere Biomoleküle verwendet. Dieser Ansatz bietet die Möglichkeit, den Mineralisationsprozeß an einem in vitro-Modellsystem zu verfolgen, was für das in vivo-System, wenn überhaupt, nur unter starken Einschränkungen möglich ist. Es wurde gezeigt, daß das künstliche Perlmutt über die Mesoskalentransformation von ACC-Precursorn innerhalb der Matrix gebildet wird und als möglicher Mechanismus bei der Biomineralisation von natürlichem Perlmutt diskutiert. Es konnte in der vorliegenden Arbeit konsequent gezeigt werden, daß die Imitation von Biomineralisationsprozessen in in vitro-Ansätzen möglich ist, wobei chemisch-physikalische Parameter dominieren. In zukünftigen Studien sollten einerseits die mechanischen Eigenschaften des künstlichen Perlmutts untersucht werden, wofür sich in Vorversuchen im Rahmen dieser Arbeit die Nanoindentierung als geeignet herausgestellt hat. Es sollte geprüft werden, ob das hier ermittelte Prinzip zur Mineralisierung in der Materialentwicklung angewendet werden kann. Andererseits sollte die Retrosynthese auf andere Systeme ausgeweitet und in vivo-Studien durchgeführt werden, um die Gültigkeit der vorgeschlagenen Mechanismen zu überprüfen.