Refine
Year of publication
Document Type
- Article (2422) (remove)
Keywords
- Conformational analysis (14)
- biomaterials (13)
- nanoparticles (13)
- fluorescence (12)
- Palladium (11)
- photochemistry (11)
- singlet oxygen (11)
- Fluorescence (10)
- SERS (10)
- block copolymers (10)
Institute
- Institut für Chemie (2422) (remove)
1-Oxo-1,3-dithiolane (4) and its cis- andtrans-2-methyl (5,6), -4-methyl (7,8) and -5-methyl (9,10) derivatives were prepared by oxidizing the corresponding 1,3-dithiolanes (1-3) with NaIO4 in water. The oxides were purified and their isomers separated using thin layer chromatography. The structural characterization was carried out with 1H and 13C NMR spectroscopy and molecular modelling. The sulfoxides 4-6 and 8-10 attain two S(1) type envelopes (sometimes slightly distorted) the S=Oax envelope greatly dominating. Cis-4-methyl-1-oxo-1,3-dithiolane is a special case exhibiting both two closely related S=Oax (30 and 27%) as well as S=Oeq (21 and 22%) forms [S(1) and C(4) envelopes, respectively]. The relative energies of these conformations, the values of 1H-1H coupling constants and 1H and 13C chemical shifts were estimated by computational methods and they support well the conclusions based on the experimental data.
13 C NMR Chemical shift calculations for some substituted pyridines - a comparative consideration
(1997)
13C NMR chemical shifts of unbranched 2-Alkyn-1-ols, w-Alkyn-1-ols and "internal" Alkyn-1-ols
(1995)
Selenides of the type R1Se-EMe3 (E = Si, Ge, Sn, Pb) react with xenon difluoride by cleavage of the Se-E bond to yield the R1Se-F intermediate and the fluorides Me3E-F, whereas the Se-C bond in PhSe-tBu (E = C) is stable against XeF2. The presence of R1Se-F intermediates is confirmed by addition to acetylenes (4-octyne, 3-hexyne). Thus, the fluoroselenenylation of acetylenes gives fluoro(organylseleno)olefins in preparative yields. In the cases of E = Si, Ge, Sn, and Pb, aryl and n-alkyl groups are suitable as the substituent R1. The X-ray crystal structural analysis of (E)-3- (p-carboxyphenylseleno)-4-fluorohex-3-ene - the first example of an uncharged fluoroselenoolefin synthesized from p- EtO2C-C6H4-Se-SnMe3, XeF2, and 3-hexyne followed by an ester hydrolysis - shows that the addition of the selenenylfluoride intermediate to the acetylene proceeds via a trans-addition, as is known for the R2Se2-XeF2 reagents.
1H NMR Lanthanideinduced Shift (LIS) investigations of highly flexible molecules : a new approach
(1993)
1H, 13C, and 15N NMR study of the solution structure of metabridged bis(benzo-15-crown-5-ether)s
(1995)
Block copolymers of 1H,1H,2H,2H-perfluorodecyl acrylate (AC8) were obtained from ARGET ATRP. To obtain block copolymers of low dispersity the PAC8 block was synthesized in anisole with a CuBr(2)/PMDETA catalyst in the presence of tin(II) 2-ethylhexanoate as a reducing agent. The PAC8 block was subsequently used as macroinitiator for copolymerization with butyl and tert-butyl acrylate carried out in scCO(2). To achieve catalyst solubility in CO(2) two fluorinated ligands were employed. The formation of block copolymers was confirmed by size exclusion chromatography and DSC.
2,11-Dialkylated 1,12-diazaperylenes (alkyl = Me, Et, iPr) dmedap, detdap and dipdap have been synthesized by reductive cyclization of 3,3-dialkylated 1,1-biisoquinolines 3a-c, resulting in the first copper(I) complexes of a large- surface ligand. The new copper(I) complexes show low-energy MLCT absorptions unprecedented for bis(-diimin)copper(I) complexes. The solid structures of the complexes[Cu(dipdap)2]BF4·CH2Cl2·1.5H2O, [Cu(dipdap)2]OTf·CH2Cl2, [Cu(dipdap)2]I·C2H4Cl2·THF·2H2O, [Cu(dmedap)2]OTf and [Cu(dipdap)2]AQSO3·H2O (AQSO3 = sodium 9,10-dihydro-9,10-dioxo-2- anthracenesulfonate) are reported. In [Cu(dipdap)2]BF4·CH2Cl2·1.5H2O, each copper(I) complex cation interacts with two others by - stacking interactions forming a novel supramolecular column structural motif running along the crystallographic c axis. In the crystalline compound [Cu(dipdap)2]AQSO3·H2O, aggregation between two complex cations and two additional anions by - stacking interactions is observed, leading to a tetrameric assembly. Furthermore, the three complex compounds [Cu(L)2]BF4 (L = dmedap, detdap, dipdap) were tested for sensory applications in aqueous buffer solutions in electrochemical studies of the complex immobilized on glassy carbon electrodes.
User-friendly protocols for the protecting group-free synthesis of 2,2'-biphenols via Suzuki-Miyaura coupling of o-halophenols and o-boronophenol are presented. The reactions proceed in water in the presence of simple additives such as K2CO3, KOH, KF, or TBAF and with commercially available Pd/C as precatalyst. Expensive or laboriously synthesized ligands or other additives are not required. In the case of bromophenols, efficient rate acceleration and short reaction times were accomplished by microwave irradiation.
A series of new 2 2'-bipyridine/1 2-dithiolate transition metal complexes has been synthesised and characterised As 1,2-dithiolate ligands 1,2 dithiooxalate (dto) and 1 2-dithiosquarate (dtsq) were used It follows from the IR spectra that the multidentate dithiolate ligands coordinate exclusively via their sulfur atoms forming an MN2S2 coordination sphere The central metal ions (M) are Cu2+ Ni2+ Pd2+ Pt2+, and Zn2+ The complex [Cu-II(bpy)(dto)] could be studied by EPR spectroscopy and was measured as powder diamagnetically diluted in the isostructural [Ni-II(bpy)(dto)] host structure The spin density contribution calculated from the experimental parameters is compared with the electronic situation in the frontier orbitals namely in the semi occupied SOMO of the copper complex derived from quantum chemical calculations on different levels (EHT and DFT)
New spin probes bearing the 2,2,6,6-tetramethylpiperidine-1-yloxyl covalently bound to the imidazolium ion via a methylene spacer and an amide group are synthesized. If the anion is bis(trifluoromethylsulfonylimide) instead of iodide, the new spin probe has a similar structure as that of an ionic liquid. Nevertheless, the new spin probes are useful tools to investigate ionic liquids.
A series of 5-unsubstituted and 5-substituted 2-alkylidene-4-oxothiazolidine-S-oxides were synthesized by the sulfur-oxidation with m-CPBA. The stereochemistry of 5-substituted sulfoxides was determined by means of NMR spectroscopy and DFT theoretical calculations. It was found that the thermodynamically less stable anti-isomer was initially formed in the course of the oxidation, but it underwent epimerization to the mixture enriched in the more stable syn-isomer, during the work-up process. The higher stability of syn-isomers is ascribed to the stronger hyperconjugative sigma(C-H)->sigma*(S-O) interaction versus the weaker sigma(C-C)->sigma*(S-O) delocalization in their anti-counterparts and to the existence of intramolecular 1,5-CH center dot center dot center dot C hydrogen bonds.
The complete H-1 and C-13 NMR chemical shifts assignment for various 2-substituted and 2,2-disubstituted adamantane derivatives 1-38 in CDCl3 solution was realized on the basis of NMR experiments combined with chemical structure information and DFT-GIAO (B3LYP/6-31+G(d,p)-GIAO) calculations of chemical shifts in solution. Substituent-induced C-13 NMR chemical shifts (SCS) are discussed. C-H-ax center dot center dot center dot Y-ax contacts are a textbook prototype of steric hindrance in organic chemistry. The nature of these contacts will be further investigated in this work on basis of new adamantane derivatives, which are substituted at C-2 to provide models for 1,4-C-H-ax center dot center dot center dot Y-ax and 1,5-C-H-ax center dot center dot center dot Y-ax contacts. The B3LYP/6-31+G(d,p) calculations predicted the presence of NBO hyperconjugative attractive interactions between C-H-ax and Y-ax groups along C-H-ax center dot center dot center dot Y-ax contacts. The H-1 NMR signal separation, Delta delta(gamma-CH2), reflects the strength of the H-bonded C-H-ax center dot center dot center dot Y-ax contact. (C) 2015 Elsevier Ltd. All rights reserved.