Refine
Has Fulltext
- yes (25) (remove)
Year of publication
- 2017 (25) (remove)
Document Type
- Doctoral Thesis (25) (remove)
Is part of the Bibliography
- yes (25)
Keywords
- FRET (3)
- Bioraffinerie (2)
- Calciumphosphat (2)
- DNA origami (2)
- Förster resonance energy transfer (2)
- Gold (2)
- Nanopartikel (2)
- gold (2)
- self-assembly (2)
- "Reactive Flux" Ratenkonstanten (1)
- 2-Thiodisaccharide (1)
- 2-Thiodisaccharides (1)
- 2P-FRET (1)
- Aktivierungsentropie (1)
- Anisotrope Kolloide (1)
- Aufarbeitung von Fruktose (1)
- Azobenzol (1)
- BAPTA (1)
- Biomasse (1)
- Biorefinery (1)
- Biosensoren (1)
- Blockcopolymervesikel (1)
- Bombyx mori Seide (1)
- Bombyx mori silk (1)
- Calcium (1)
- Calcium Bindungsstelle (1)
- Calcium binding site (1)
- Calcium phosphate (1)
- Catalysis (1)
- Cer Ammonium Nitrat (CAN) (1)
- Ceric Ammonium Nitrate (CAN) (1)
- Coumarin (1)
- DBD (1)
- DFTB3 (1)
- DNA Origami (1)
- DNA-Origami (1)
- Dihydroxyaceton (1)
- Doppelt hydrophile Blockcopolymere (1)
- Dotierung (1)
- Eisenoxidnanopartikel (1)
- Elektrosprayionisation (1)
- Faltenstrukturen (1)
- FhuA (1)
- Fluoreszenz (1)
- Förster-Resonanz-Energie-Transfer (1)
- Förster-Resonanzenergietransfer (1)
- Goldnanopartikel (1)
- HPLC (1)
- Harnstoff (1)
- Hydroxymethylfurfural (1)
- Ionenmobilitätsspektrometrie (1)
- Katalyse (1)
- Kohlenhydrate (1)
- Kohlenstoff-Nanopunkte (1)
- Kohlenstoff-Punkte (1)
- Kohlenstofffilme (1)
- Kohlenstoffnitride (1)
- Kohlenstoffpartikel (1)
- Kohlenstoffsynthese (1)
- Komposite (1)
- Kontaktdruck (1)
- Koordinationskomplexe (1)
- Ladung Transport (1)
- Leitruss (1)
- Lignin (1)
- Lösungsmitteleffekte (1)
- Lösungsprozess (1)
- Magnetic Particle Imaging (1)
- Magnetresonanztomograpgie (1)
- Mesokristalle (1)
- Mineralisation (1)
- N-Alkylglycin (1)
- N-alkyl-glycine (1)
- Nanolinsen (1)
- OLED (1)
- OSK (1)
- OSTK (1)
- Origo-Spiro-Thio-Ketal-Stäbe (1)
- Oxo-Kohlenstoff (1)
- Photochemie (1)
- Photokatalyse (1)
- Plasmonik (1)
- Polyester (1)
- Polykondensation (1)
- Polymerchemie (1)
- Polymere (1)
- Polymersynthese (1)
- Polypeptoide (1)
- Protein-Polymer Konjugaten (1)
- Pyrolyse (1)
- QM/MM Molekulardynamik (1)
- QM/MM stochastic dynamics (1)
- Quadratsäure (1)
- Quantenchemie (1)
- RAFT/MADIX Polymerisation (1)
- RAFT/MADIX polymerization (1)
- ROP (1)
- Radikalreaktionen (1)
- Reaktionsmechanismen (1)
- Ringöffnungspolymerisation (1)
- SERS (1)
- Selbstassemblierung (1)
- Selbstorganisation (1)
- Silbernanopartikel (1)
- Surface Hopping Dynamik (1)
- Tannine (1)
- Templatgesteuerte Assemblierung (1)
- Templatphase (1)
- Titandioxid (1)
- Transmembranprotein (1)
- Upgrade of Fructose (1)
- Wasser-Luft-Grenzfläche (1)
- activated urethane (1)
- activation entropy (1)
- air-water interface (1)
- aktiviertes Urethan (1)
- anisotrop (1)
- anisotropic (1)
- azobenzene (1)
- biomass (1)
- biorefinery (1)
- biosensors (1)
- block copolymer vesicles (1)
- calcium (1)
- calcium phosphate (1)
- carbohydrates (1)
- carbon dots (1)
- carbon films (1)
- carbon nanodots (1)
- carbon nitrides (1)
- carbon particle (1)
- carbon synthesis (1)
- charge transport (1)
- composite materials (1)
- conducting soot (1)
- controlled radical polymerization (1)
- coordination complexes (1)
- coumarin (1)
- dihydroxyacetone (1)
- doping (1)
- double hydrophilic block copolymers (1)
- electrospray ionization (ESI) (1)
- fluorescence (1)
- gold nanoparticles (1)
- high quantum yield (1)
- hohe Quantenausbeute (1)
- ion mobility spectrometry (1)
- iron oxide nanoparticle (1)
- kontrollierte radikalische Polymerisationen (1)
- lower critical solution temperature (1)
- magnetic resonance imaging (1)
- mesocrystals (1)
- microwave synthesis (1)
- mikrowellengestützte Synthese (1)
- mineralization (1)
- molecular rods (1)
- molekulare Stäbe (1)
- nanolenses (1)
- nanoparticle (1)
- nanoparticles (1)
- nanoporous carbon particles (1)
- nanoporöser Kohlenstoffpartikel (1)
- oligo spiro thio ketal rods (1)
- oxocarbon (1)
- particle assembly (1)
- patchy particles (1)
- phosphonate containing polymers (1)
- phosphonathaltige Polymere (1)
- photocatalysis (1)
- photocatalytic water splitting (1)
- photochemistry (1)
- photokatalytische Wasserspaltung (1)
- plasmonics (1)
- polycondensation (1)
- polyesters (1)
- polymer chemistry (1)
- polymer induced Biomineralization (1)
- polymer synthesis (1)
- polymers (1)
- polymervermittelte Biomineralisation (1)
- polypeptoids (1)
- porous materials (1)
- poröse Materialien (1)
- printing (1)
- protein-polymer conjugate (1)
- pyrolysis (1)
- quantum chemistry (1)
- radical reactions (1)
- reactive flux rate constants (1)
- schaltbare Materialien (1)
- silver nanoparticles (1)
- smart materials (1)
- solution process (1)
- solvent effect (1)
- squaric acid (1)
- supramolecular chemistry (1)
- supramolekulare Chemie (1)
- surface hopping dynamics (1)
- surface modification (1)
- tannins (1)
- template phase (1)
- thermal isomerization of azobenzene (1)
- thermisch angeregte Isomerisierung von Azobenzolen (1)
- titania (1)
- transition path sampling (1)
- transmembrane protein (1)
- ultra-thin membrane (1)
- ultradünne Membranen (1)
- untere kritische Entmischungstemperatur (1)
- urea (1)
- weißer Kohlenstoff (1)
- white carbon (1)
- wrinkles (1)
Institute
- Institut für Chemie (25) (remove)
Die Elektrosprayionisation (ESI) ist eine der weitverbreitetsten Ionisationstechniken für flüssige Pro-ben in der Massen- und Ionenmobilitäts(IM)-Spektrometrie. Aufgrund ihrer schonenden Ionisierung wird ESI vorwiegend für empfindliche, komplexe Moleküle in der Biologie und Medizin eingesetzt. Überdies ist sie allerdings für ein sehr breites Spektrum an Substanzklassen anwendbar. Die IM-Spektrometrie wurde ursprünglich zur Detektion gasförmiger Proben entwickelt, die hauptsächlich durch radioaktive Quellen ionisiert werden. Sie ist die einzige analytische Methode, bei der Isomere in Echtzeit getrennt und über ihre charakteristische IM direkt identifiziert werden können. ESI wurde in den 90ger Jahren durch die Hill Gruppe in die IM-Spektrometrie eingeführt. Die Kombination wird bisher jedoch nur von wenigen Gruppen verwendet und hat deshalb noch ein hohes Entwick-lungspotential. Ein vielversprechendes Anwendungsfeld ist der Einsatz in der Hochleistungs-flüssigkeitschromatographie (HPLC) zur mehrdimensionalen Trennung. Heutzutage ist die HPLC die Standardmethode zur Trennung komplexer Proben in der Routineanalytik. HPLC-Trennungsgänge sind jedoch häufig langwierig und der Einsatz verschiedener Laufmittel, hoher Flussraten, von Puffern, sowie Laufmittelgradienten stellt hohe Anforderungen an die Detektoren. Die ESI-IM-Spektrometrie wurde in einigen Studien bereits als HPLC-Detektor eingesetzt, war dort bisher jedoch auf Flussratensplitting oder geringe Flussraten des Laufmittels beschränkt.
In dieser kumulativen Doktorarbeit konnte daher erstmals ein ESI IM-Spektrometer als HPLC-Detektor für den Flussratenbereich von 200-1500 μl/min entwickelt werden. Anhand von fünf Publi-kationen wurden (1) über eine umfassende Charakterisierung die Eignung des Spektrometers als HPLC-Detektor festgestellt, (2) ausgewählte komplexe Trenngänge präsentiert und (3) die Anwen-dung zum Reaktionsmonitoring und (4, 5) mögliche Weiterentwicklungen gezeigt.
Erfolgreich konnten mit dem selbst-entwickelten ESI IM-Spektrometer typische HPLC-Bedingungen wie Wassergehalte im Laufmittel von bis zu 90%, Pufferkonzentrationen von bis zu 10 mM, sowie Nachweisgrenzen von bis zu 50 nM erreicht werden. Weiterhin wurde anhand der komplexen Trennungsgänge (24 Pestizide/18 Aminosäuren) gezeigt, dass die HPLC und die IM-Spektrometrie eine hohe Orthogonalität besitzen. Eine effektive Peakkapazität von 240 wurde so realisiert. Auf der HPLC-Säule koeluierende Substanzen konnten über die Driftzeit getrennt und über ihre IM identifi-ziert werden, sodass die Gesamttrennzeiten erheblich minimiert werden konnten. Die Anwend-barkeit des ESI IM-Spektrometers zur Überwachung chemischer Synthesen wurde anhand einer dreistufigen Reaktion demonstriert. Es konnten die wichtigsten Edukte, Zwischenprodukte und Produkte aller Stufen identifiziert werden. Eine quantitative Auswertung war sowohl über eine kurze HPLC-Vortrennung als auch durch die Entwicklung eines eigenen Kalibrierverfahrens, welches die Ladungskonkurrenz bei ESI berücksichtigt, ohne HPLC möglich. Im zweiten Teil der Arbeit werden zwei Weiterentwicklungen des Spektrometers präsentiert. Eine Möglichkeit ist die Reduzierung des Drucks in den intermediären Bereich (300 - 1000 mbar) mit dem Ziel der Verringerung der benötigten Spannungen. Mithilfe von Streulichtbildern und Strom-Spannungs-Kurven wurden für geringe Drücke eine verminderte Freisetzung der Analyt-Ionen aus den Tropfen festgestellt. Die Verluste konnten jedoch über höhere elektrische Feldstärken ausgeglichen werden, sodass gleiche Nachweisgrenzen bei 500 mbar und bei 1 bar erreicht wurden. Die zweite Weiterentwicklung ist ein neuartiges Ionentors mit Pulsschaltung, welches eine Verdopplung der Auflösung auf bis zu R > 100 bei gleicher Sensitivität ermöglichte. Eine denkbare Anwendung im Bereich der Peptidanalytik wurde mit beachtlichen Auflösungen der Peptide von R = 90 gezeigt.
Magnetische Eisenoxidnanopartikel werden bereits seit geraumer Zeit erfolgreich als MRT-Kontrastmittel in der klinischen Bildgebung eingesetzt. Durch Optimierung der magnetischen Eigenschaften der Nanopartikel kann die Aussagekraft von MR-Aufnahmen verbessert und somit der diagnostische Wert einer MR-Anwendung weiter erhöht werden. Neben der Verbesserung bestehender Verfahren wird die bildgebende Diagnostik ebenso durch die Entwicklung neuer Verfahren, wie dem Magnetic Particle Imaging, vorangetrieben. Da hierbei das Messsignal von den magnetischen Nanopartikeln selbst erzeugt wird, birgt das MPI einen enormen Vorteil hinsichtlich der Sensitivität bei gleichzeitig hoher zeitlicher und räumlicher Auflösung. Da es aktuell jedoch keinen kommerziell vertriebenen in vivo-tauglichen MPI-Tracer gibt, besteht ein dringender Bedarf an geeigneten innovativen Tracermaterialien. Daraus resultierte die Motivation dieser Arbeit biokompatible und superparamagnetische Eisenoxidnanopartikel für den Einsatz als in vivo-Diagnostikum insbesondere im Magnetic Particle Imaging zu entwickeln. Auch wenn der Fokus auf der Tracerentwicklung für das MPI lag, wurde ebenso die MR-Performance bewertet, da geeignete Partikel somit alternativ oder zusätzlich als MR-Kontrastmittel mit verbesserten Kontrasteigenschaften eingesetzt werden könnten.
Die Synthese der Eisenoxidnanopartikel erfolgte über die partielle Oxidation von gefälltem Eisen(II)-hydroxid und Green Rust sowie eine diffusionskontrollierte Kopräzipitation in einem Hydrogel.
Mit der partiellen Oxidation von Eisen(II)-hydroxid und Green Rust konnten erfolgreich biokompatible und über lange Zeit stabile Eisenoxidnanopartikel synthetisiert werden. Zudem wurden geeignete Methoden zur Formulierung und Sterilisierung etabliert, wodurch zahlreiche Voraussetzungen für eine Anwendung als in vivo-Diagnostikum geschaffen wurden. Weiterhin ist auf Grundlage der MPS-Performance eine hervorragende Eignung dieser Partikel als MPI-Tracer zu erwarten, wodurch die Weiterentwicklung der MPI-Technologie maßgeblich vorangetrieben werden könnte. Die Bestimmung der NMR-Relaxivitäten sowie ein initialer in vivo-Versuch zeigten zudem das große Potential der formulierten Nanopartikelsuspensionen als MRT-Kontrastmittel. Die Modifizierung der Partikeloberfläche ermöglicht ferner die Herstellung zielgerichteter Nanopartikel sowie die Markierung von Zellen, wodurch das mögliche Anwendungsspektrum maßgeblich erweitert wurde.
Im zweiten Teil wurden Partikel durch eine diffusionskontrollierte Kopräzipitation im Hydrogel, wobei es sich um eine bioinspirierte Modifikation der klassischen Kopräzipitation handelt, synthetisiert, wodurch Partikel mit einer durchschnittlichen Kristallitgröße von 24 nm generiert werden konnten. Die Bestimmung der MPS- und MR-Performance elektrostatisch stabilisierter Partikel ergab vielversprechende Resultate. In Vorbereitung auf die Entwicklung eines in vivo-Diagnostikums wurden die Partikel anschließend erfolgreich sterisch stabilisiert, wodurch der kolloidale Zustand in MilliQ-Wasser über lange Zeit aufrechterhalten werden konnte. Durch Zentrifugation konnten die Partikel zudem erfolgreich in verschiedene Größenfraktionen aufgetrennt werden. Dies ermöglichte die Bestimmung der idealen Aggregatgröße dieses Partikelsystems in Bezug auf die MPS-Performance.
Functional nanoporous carbon-based materials derived from oxocarbon-metal coordination complexes
(2017)
Nanoporous carbon based materials are of particular interest for both science and industry due to their exceptional properties such as a large surface area, high pore volume, high electroconductivity as well as high chemical and thermal stability. Benefiting from these advantageous properties, nanoporous carbons proved to be useful in various energy and environment related applications including energy storage and conversion, catalysis, gas sorption and separation technologies. The synthesis of nanoporous carbons classically involves thermal carbonization of the carbon precursors (e.g. phenolic resins, polyacrylonitrile, poly(vinyl alcohol) etc.) followed by an activation step and/or it makes use of classical hard or soft templates to obtain well-defined porous structures. However, these synthesis strategies are complicated and costly; and make use of hazardous chemicals, hindering their application for large-scale production. Furthermore, control over the carbon materials properties is challenging owing to the relatively unpredictable processes at the high carbonization temperatures.
In the present thesis, nanoporous carbon based materials are prepared by the direct heat treatment of crystalline precursor materials with pre-defined properties. This synthesis strategy does not require any additional carbon sources or classical hard- or soft templates. The highly stable and porous crystalline precursors are based on coordination compounds of the squarate and croconate ions with various divalent metal ions including Zn2+, Cu2+, Ni2+, and Co2+, respectively. Here, the structural properties of the crystals can be controlled by the choice of appropriate synthesis conditions such as the crystal aging temperature, the ligand/metal molar ratio, the metal ion, and the organic ligand system. In this context, the coordination of the squarate ions to Zn2+ yields porous 3D cube crystalline particles. The morphology of the cubes can be tuned from densely packed cubes with a smooth surface to cubes with intriguing micrometer-sized openings and voids which evolve on the centers of the low index faces as the crystal aging temperature is raised. By varying the molar ratio, the particle shape can be changed from truncated cubes to perfect cubes with right-angled edges.
These crystalline precursors can be easily transformed into the respective carbon based materials by heat treatment at elevated temperatures in a nitrogen atmosphere followed by a facile washing step. The resulting carbons are obtained in good yields and possess a hierarchical pore structure with well-organized and interconnected micro-, meso- and macropores. Moreover, high surface areas and large pore volumes of up to 1957 m2 g-1 and 2.31 cm3 g-1 are achieved, respectively, whereby the macroscopic structure of the precursors is preserved throughout the whole synthesis procedure.
Owing to these advantageous properties, the resulting carbon based materials represent promising supercapacitor electrode materials for energy storage applications. This is exemplarily demonstrated by employing the 3D hierarchical porous carbon cubes derived from squarate-zinc coordination compounds as electrode material showing a specific capacitance of 133 F g-1 in H2SO4 at a scan rate of 5 mV s-1 and retaining 67% of this specific capacitance when the scan rate is increased to 200 mV s-1.
In a further application, the porous carbon cubes derived from squarate-zinc coordination compounds are used as high surface area support material and decorated with nickel nanoparticles via an incipient wetness impregnation. The resulting composite material combines a high surface area, a hierarchical pore structure with high functionality and well-accessible pores. Moreover, owing to their regular micro-cube shape, they allow for a good packing of a fixed-bed flow reactor along with high column efficiency and a minimized pressure drop throughout the packed reactor. Therefore, the composite is employed as heterogeneous catalyst in the selective hydrogenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran showing good catalytic performance and overcoming the conventional problem of column blocking.
Thinking about the rational design of 3D carbon geometries, the functions and properties of the resulting carbon-based materials can be further expanded by the rational introduction of heteroatoms (e.g. N, B, S, P, etc.) into the carbon structures in order to alter properties such as wettability, surface polarity as well as the electrochemical landscape. In this context, the use of crystalline materials based on oxocarbon-metal ion complexes can open a platform of highly functional materials for all processes that involve surface processes.
Im Rahmen dieser Arbeit wurden zum einen erste Oligospiro(thio)ketal (OS(T)K)-basierte Modellsysteme (molekulare Sonden) für abstandsabhängige Messungen mittels Förster-Resonanz-Energietransfer (FRET) und zum anderen Sensorfluorophore, basierend auf einem DBD-Fluorophor und BAPTA, zur Messung der intrazellulären Calcium-Konzentration dargestellt.
Für die Synthese von molekularen Sonden für abstandsabhängige Messungen wurden verschiedenste einfach- und doppelt-markierte OS(T)K-Stäbe entwickelt und spektroskopisch untersucht. Die OS(T)K-Stäbe, sogenannte molekulare Stäbe, dienten als starre Abstandshalter zwischen den Fluorophoren. Als Fluorophore wurden Derivate von 6,7-Dihydroxy-4-methylcoumarin (Donor) und Acyl-DBD (Akzeptor) verwendet, die zusammen ein FRET-Paar bilden. Die Fluorophore wurden so funktionalisiert, dass sie sowohl unbeweglich bzw. „starr“, als auch beweglich bzw. „flexibel“ an den OS(T)K-Stab gebunden werden konnten. Für die Synthese der OS(T)K-Stäbe wurden ebenfalls eine Reihe an unterschiedlich langen und kurzen Stabbausteinen synthetisiert. Auf diese Weise wurden eine Vielzahl an verschiedensten einfach- und doppelt-markierten OS(T)K-Stäben dargestellt, deren Fluorophore sowohl „starr“ als auch „flexibel“ gebunden sind. Die dargestellten Stäbe wurden in verschiedensten Lösungsmitteln spektroskopisch untersucht, um anschließend das Verhalten in Vesikel, die eine biomimetische Umgebung darstellen, zu beurteilen. Es wurde festgestellt, dass sich die Stäbe erfolgreich in die Vesikelmembran einlagerten und hohe FRET-Effizienzen aufweisen.
Des Weiteren wurde ein FRET-Paar dargestellt, das sich durch 2-Photonenabsorpion im NIR-Bereich anregen lässt. Es wurde in den lebenden Zellen mittels Fluoreszenzlebenszeitmikroskopie (FLIM) untersucht.
Zur Untersuchung von intrazellulärem Calcium wurden zwei verschiedene DBD-Fluorophore über einen kurzen Linker mit dem Calcium-Chelator BAPTA verknüpft. Die dargestellten Fluorophore wurden sowohl in vitro als auch in vivo auf ihre Calcium-Sensitivität überprüft. Mittels FLIM wurden in lebenden Zellen die Fluoreszenzlebenszeitverteilungen der Fluorophore nach Calcium-Konzentrationsänderungen detektiert.
The field of nanophotonics focuses on the interaction between electromagnetic radiation and matter on the nanometer scale. The elements of nanoscale photonic devices can transfer excitation energy non-radiatively from an excited donor molecule to an acceptor molecule by Förster resonance energy transfer (FRET). The efficiency of this energy transfer is highly dependent on the donor-acceptor distance. Hence, in these nanoscale photonic devices it is of high importance to have a good control over the spatial assembly of used fluorophores. Based on molecular self-assembly processes, various nanostructures can be produced. Here, DNA nanotechnology and especially the DNA origami technique are auspicious self-assembling methods. By using DNA origami nanostructures different fluorophores can be introduced with a high local control to create a variety of nanoscale photonic objects. The applications of such nanostructures range from photonic wires and logic gates for molecular computing to artificial light harvesting systems for artificial photosynthesis.
In the present cumulative doctoral thesis, different FRET systems on DNA origami structures have been designed and thoroughly analyzed. Firstly, the formation of guanine (G) quadruplex structures from G rich DNA sequences has been studied based on a two-color FRET system (Fluorescein (FAM)/Cyanine3 (Cy3)). Here, the influences of different cations (Na+ and K+), of the DNA origami structure and of the DNA sequence on the G-quadruplex formation have been analyzed. In this study, an ion-selective K+ sensing scheme based on the G-quadruplex formation on DNA origami structures has been developed. Subsequently, the reversibility of the G-quadruplex formation on DNA origami structures has been evaluated. This has been done for the simple two-color FRET system which has then been advanced to a switchable photonic wire by introducing additional fluorophores (FAM/Cy3/Cyanine5 (Cy5)/IRDye®700). In the last part, the emission intensity of the acceptor molecule (Cy5) in a three-color FRET cascade has been tuned by arranging multiple donor (FAM) and transmitter (Cy3) molecules around the central acceptor molecule. In such artificial light harvesting systems, the excitation energy is absorbed by several donor and transmitter molecules followed by an energy transfer to the acceptor leading to a brighter Cy5 emission. Furthermore, the range of possible excitation wavelengths is extended by using several different fluorophores (FAM/Cy3/Cy5). In this part of the thesis, the light harvesting efficiency (antenna effect) and the FRET efficiency of different donor/transmitter/acceptor assemblies have been analyzed and the artificial light harvesting complex has been optimized in this respect.
Nanolenses are linear chains of differently-sized metal nanoparticles, which can theoretically provide extremely high field enhancements. The complex structure renders their synthesis challenging and has hampered closer analyses so far. Here, the technique of DNA origami was used to self-assemble DNA-coated 10 nm, 20 nm, and 60 nm gold or silver nanoparticles into gold or silver nanolenses. Three different geometrical arrangements of gold nanolenses were assembled, and for each of the three, sets of single gold nanolenses were investigated in detail by atomic force microscopy, scanning electron microscopy, dark-field scattering and Raman spectroscopy. The surface-enhanced Raman scattering (SERS) capabilities of the single nanolenses were assessed by labelling the 10 nm gold nanoparticle selectively with dye molecules. The experimental data was complemented by finite-difference time-domain simulations. For those gold nanolenses which showed the strongest field enhancement, SERS signals from the two different internal gaps were compared by selectively placing probe dyes on the 20 nm or 60 nm gold particles. The highest enhancement was found for the gap between the 20 nm and 10 nm nanoparticle, which is indicative of a cascaded field enhancement. The protein streptavidin was labelled with alkyne groups and served as a biological model analyte, bound between the 20 nm and 10 nm particle of silver nanolenses. Thereby, a SERS signal from a single streptavidin could be detected. Background peaks observed in SERS measurements on single silver nanolenses could be attributed to amorphous carbon. It was shown that the amorphous carbon is generated in situ.
In der vorliegenden Arbeit konnte gezeigt werden, dass die beiden verwendeten Amphiphile mit Cholesterol als hydrophoben Block, gute Template für die Mineralisation von Calciumphosphat an der Wasser/Luft-Grenzfläche sind. Mittels Infrarot-Reflexions-Absorptions-Spektroskopie (IRRAS), Röntgenphotoelektronenspektroskopie (XPS), Energie dispersiver Röntgenspektroskopie (EDXS), Elektronenbeugung (SAED) und hochauflösende Transmissionselektronenmikroskopie (HRTEM) konnte die erfolgreiche Mineralisation von Calciumphosphat für beide Amphiphile an der Wasser/Luft-Grenzfläche nachgewiesen werden. Es konnte auch gezeigt werden, dass das Phasenverhalten der beiden Amphiphile und die bei der Mineralisation von Calciumphosphat gebildeten Kristallphasen nicht identisch sind. Beide Amphiphile üben demnach einen unterschiedlichen Einfluss auf den Mineralisationsverlauf aus.
Beim CHOL-HEM konnte sowohl nach 3 h als auch nach 5 h Octacalciumphosphat (OCP) als einzige Kristallphase mittels XPS, SAED, HRTEM und EDXS nachgewiesen werden. Das A-CHOL hingegen zeigte bei der Mineralisation von Calciumphosphat nach 1 h zunächst eine nicht eindeutig identifizierbare Vorläuferphase aus amorphen Calciumphosphat, Brushit (DCPD) oder OCP. Diese wandelte sich dann nach 3 h und 5 h in ein Gemisch, bestehend aus OCP und ein wenig Hydroxylapatit (HAP) um.
Die Schlussfolgerung daraus ist, dass das CHOL-HEM in der Lage ist, dass während der Mineralisation entstandene OCP zu stabilisieren. Dies geschieht vermutlich durch die Adsorption des Amphiphils bevorzugt an der OCP Oberfläche in [100] Orientierung. Dadurch wird die Spaltung entlang der c-Achse unterdrückt und die Hydrolyse zum HAP verhindert.
Das A-CHOL ist hingegen sterisch anspruchsvoller und kann wahrscheinlich aufgrund seiner Größe nicht so gut an der OCP Kristalloberfläche adsorbieren verglichen zum CHOL HEM. Das CHOL-HEM kann also die Hydrolyse von OCP zu HAP besser unterdrücken als das A-CHOL. Da jedoch auch beim A-CHOL nach einer Mineralisationszeit von 5 h nur wenig HAP zu finden ist, wäre auch hier ein Stabilisierungseffekt der OCP Kristalle möglich. Um eine genaue Aussage darüber treffen zu können, sind jedoch zusätzliche Kontrollexperimente notwendig. Es wäre zum einen denkbar, die Mineralisationsexperimente über einen längeren Zeitraum durchzuführen. Diese könnten zeigen, ob das CHOL-HEM die Hydrolyse vom OCP zum HAP komplett unterdrückt. Außerdem könnte nachgewiesen werden, ob beim A-CHOL das OCP weiter zum HAP umgesetzt wird oder ob ein Gemisch beider Kristallphasen erhalten bleibt.
Um die Mineralisation an der Wasser/Luft-Grenzfläche mit der Mineralisation in Bulklösung zu vergleichen, wurden zusätzlich Mineralisationsexperimente in Bulklösung durchgeführt. Dazu wurden Nitrilotriessigsäure (NTA) und Ethylendiamintetraessigsäure (EDTA) als Mineralisationsadditive verwendet, da NTA unter anderem der Struktur der hydrophilen Kopfgruppe des A-CHOLs ähnelt. Es konnte gezeigt werden, dass ein Vergleich der Mineralisation an der Grenzfläche mit der Mineralisation in Bulklösung nicht ohne weiteres möglich ist. Bei der Mineralisation in Bulklösung wird bei tiefen pH-Werten DCPD und bei höheren pH-Werten HAP gebildet. Diese wurde mittels Röntgenpulverdiffraktometrie Messungen nachgewiesen und durch Infrarotspektroskopie bekräftigt. Die Bildung von OCP wie an der Wasser/Luft-Grenzfläche konnte nicht beobachtet werden.
Es konnte auch gezeigt werden, dass beide Additive NTA und EDTA einen unterschiedlichen Einfluss auf den Verlauf der Mineralisation nehmen. So unterscheiden sich zum einen die Morphologien des gebildeten DCPDs und zum anderen wurde beispielsweise in Anwesenheit von 10 und 15 mM NTA neben DCPD auch HAP bei einem Ausgangs-pH-Wert von 7 nachgewiesen.
Da unser Augenmerk speziell auf der Mineralisation von Calciumphosphat an der Wasser/Luft-Grenzfläche liegt, könnten Folgeexperimente wie beispielsweise GIXD Messungen durchgeführt werden. Dadurch wäre es möglich, einen Überblick über die gebildeten Kristallphasen nach unterschiedlichen Reaktionszeiten direkt auf dem Trog zu erhalten.
Es konnte weiterhin gezeigt werden, dass auch einfache Amphiphile in der Lage sind, die Mineralisation von Calciumphosphat zu steuern. Amphiphile mit Cholesterol als hydrophoben Block bilden offensichtlich besonders stabile Monolagen an der Wasser/Luft-Grenzfläche. Eine Untersuchung des Einflusses ähnlicher Amphiphile mit unterschiedlichen hydrophilen Kopfgruppen auf das Mineralisationsverhalten von Calciumphosphat wäre durchaus interessant.
Herstellung anisotroper Kolloide mittels templatgesteuerter Assemblierung und Kontaktdruckverfahren
(2017)
Diese Arbeit befasste sich mit neuen Konzepten zur Darstellung anisotroper Partikelsysteme durch Anordnung von funktionalisierten Partikeln unter Zuhilfenahme etablierter Methoden wie der templatgestützten Assemblierung von Partikeln und dem Mikrokontaktdruck.
Das erste Teilprojekt beschäftigte sich mit der kontrollierten Herstellung von Faltenstrukturen im Mikro- bis Nanometerbereich. Die Faltenstrukturen entstehen durch die Relaxation eines Systems bestehend aus zwei übereinander liegender Schichten unterschiedlicher Elastizität. In diesem Fall wurden Falten auf einem elastischen PDMS-Substrat durch Generierung einer Oxidschicht auf der Substratoberfläche mittels Plasmabehandlung erzeugt. Die Dicke der Oxidschicht, die über verschiedene Parameter wie Behandlungszeit, Prozessleistung, Partialdruck des plasmaaktiven Gases, Vernetzungsgrad, Deformation sowie Substratdicke einstellbar war, bestimmte Wellenlänge und Amplitude der Falten.
Das zweite Teilprojekt hatte die Darstellung komplexer, kolloidaler Strukturen auf Basis supramolekularer Wechselwirkungen zum Ziel. Dazu sollte vor allem die templatgestützte Assemblierung von Partikeln sowohl an fest-flüssig als auch flüssig-flüssig Grenzflächen genutzt werden. Für Erstere sollten die in Teilprojekt 1 hergestellten Faltenstrukturen als Templat, für Letztere Pickering-Emulsionen zur Anwendung kommen. Im ersten Fall wurden verschiedene, modifizierte Silicapartikel und Magnetitnanopartikel, deren Größe und Oberflächenfunktionalität (Cyclodextrin-, Azobenzol- und Arylazopyrazolgruppen) variierte, in Faltenstrukturen angeordnet. Die Anordnung hing dabei nicht nur vom gewählten Verfahren, sondern auch von Faktoren wie der Partikelkonzentration, der Oberflächenladung oder dem Größenverhältnis der Partikel zur Faltengeometrie ab.
Die Kombination von Cyclodextrin (CD)- und Arylazopyrazol-modifizierten Partikeln ermöglichte, auf Basis einer Wirt-Gast-Wechselwirkung zwischen den Partikeltypen und einer templatgesteuerten Anordnung, die Bildung komplexer und strukturierter Formen in der Größenordnung mehrerer Mikrometer. Dieses System kann einerseits als Grundlage für die Herstellung verschiedener Janus-Partikel herangezogen werden, andererseits stellt die gerichtete Vernetzung zweier Partikelsysteme zu größeren Aggregaten den Grundstein für neuartige, funktionale Materialien dar. Neben der Anordnung an fest-flüssig Grenzflächen konnte außerdem nachgewiesen werden, dass Azobenzol-funktionalisierte Silicapartikel in der Lage sind, Pickering-Emulsionen über mehrere Monate zu stabilisieren. Die Stabilität und Größe der Emulsionsphase kann über Parameter, wie das Volumenverhältnis und die Konzentration, gesteuert werden. CD-funktionalisierte Silicapartikel besaßen dagegen keine Grenzflächenaktivität, während es CD-basierten Polymeren wiederum möglich war, durch die Ausbildung von Einschlusskomplexen mit den hydrophoben Molekülen der Ölphase stabile Emulsionen zu bilden. Dagegen zeigte die Kombination zwei verschiedener Partikelsysteme keinen oder einen destabilisierenden Effekt bezüglich der Ausbildung von Emulsionen.
Im letzten Teilprojekt wurde die Herstellung multivalenter Silicapartikel mittels Mikrokontaktdruck untersucht. Die Faltenstrukturen wurden dabei als Stempel verwendet, wodurch es möglich war, die Patch-Geometrie über die Wellenlänge der Faltenstrukturen zu steuern. Als Tinte diente das positiv geladene Polyelektrolyt Polyethylenimin (PEI), welches über elektrostatische Wechselwirkungen auf unmodifizierten Silicapartikeln haftet. Im Gegensatz zum Drucken mit flachen Stempeln fiel dabei zunächst auf, dass sich die Tinte bei den Faltenstrukturen nicht gleichmäßig über die gesamte Substratfläche verteilt, sondern hauptsächlich in den Faltentälern vorlag. Dadurch handelte es sich bei dem Druckprozess letztlich nicht mehr um ein klassisches Mikrokontaktdruckverfahren, sondern um ein Tiefdruckverfahren. Über das Tiefdruckverfahren war es dann aber möglich, sowohl eine als auch beide Partikelhemisphären gleichzeitig und mit verschiedenen Funktionalitäten zu modifizieren und somit multivalente Silicapartikel zu generieren. In Abhängigkeit der Wellenlänge der Falten konnten auf einer Partikelhemisphäre zwei bis acht Patches abgebildet werden. Für die Patch-Geometrie, sprich Größe und Form der Patches, spielten zudem die Konzentration der Tinte auf dem Stempel, das Lösungsmittel zum Ablösen der Partikel nach dem Drucken sowie die Stempelhärte eine wichtige Rolle. Da die Stempelhärte aufgrund der variierenden Dicke der Oxidschicht bei verschiedenen Wellenlängen nicht kontant ist, wurden für den Druckprozess meist Abgüsse der Faltensubstrate verwendet. Auf diese Weise war auch die Vergleichbarkeit bei variierender Wellenlänge gewährleistet. Neben dem erfolgreichen Nachweis der Modifikation mittels Tiefdruckverfahren konnte auch gezeigt werden, dass über die Komplexierung mit PEI negativ geladene Nanopartikel auf die Partikeloberfläche aufgebracht werden können.
The valorization of carbohydrates is one of the most promising fields in green chemistry, as it enables to produce bulk chemicals and fuels out of renewable and abundant resources, instead of further exploiting fossil feedstocks. The focus in this thesis is the conversion of fructose, using dehydration and hydrodeoxygenation reactions. The main goal is to find an easy continuous process, including the solubility of the sugar in a green solvent, the conversion over a solid acid as well as over a metal@tungsten carbide catalyst.
At the beginning of this thesis, solid acid catalysts are synthesized by using carbohydrate material like glucose and starch at high temperatures (up to 600 °C). Additionally a third carbon is synthesized, using an activation method based on Ca(OH)2. After carbonization and further sulfonation, using fuming sulfuric acid, the three resulting catalysts are characterized together with sulfonated carbon black and Amberlyst 15 as references. In order to test all solid acid catalysts in reaction, a 250 mm x 4.6 mm stainless steel column is used as a fixed-bed continuous reactor. The temperature (110 °C to 250 °C) and residence time (2 to 30 minutes) is varied, and a direct relationship between contact time and selectivity is determined. The reaction mechanism, as well as the product distribution is showing a dehydration step of fructose towards 5-hydroxymethylfurfural (HMF). These furan-ring molecules are considered as “sleeping giants”, due to the possibility of using them as fuel, but also for upgrading them to chemicals like terephthalic acid or p-xylene. Consecutive reactions are producing levulinic acid, as well as condensation products with ethanol and formic acid. The activated carbon is additionally showing a 2 % yield of 2,5-Dimethylfuran (DMF) production, pointing towards the extraordinary properties of this catalyst. Without a metal catalyst present, what is normally necessary for hydrogenation reactions, a transferhydrogenation (with formic acid) is observed. The active catalyst was therefore carbon itself, what activated the hydrogen on its surface. This phenomenon was just very rarely observed so far. Expensive noble metals are the material of choice, when it comes to hydrogenation reactions nowadays and cheaper alternatives are necessary.
By postulating a similar electronic structure of tungsten carbide (WC) to platinum by Lewy and Boudart, research is focusing on the replacement of Pt. The production of nano-sized tungsten carbide particles (7.5 ± 2.5 nm, 70 m2 g-1) is enabled by the so called “urea glass route” and its catalytic performances are compared to commercial material. It is shown, that the activity is strongly dependent on the size of the particles as well as the surface area. Nano-sized tungsten carbide is showing activity for hydrogenation reactions under mild conditions (maximum 150 °C, 30 bar). This material therefore opens up new possibilities for replacing the rare and expensive platinum with tungsten carbide based catalysts.
Additionally different metal nanoparticles of palladium, copper and nickel are deposited on top of WC to further promote its reactivity. The nickel nanoparticles are strongly connected to WC and showed the best activity as well as selectivity for upgrading HMF with hydrodeoxygenation. The Ni@WC is not leaching and is showing very good hydrodeoxygenation properties with DMF yields up to 90 percent. Copper@WC is not showing good activity and palladium@WC enables undesired consecutive reactions, hydrogenating the furan ring system.
In order to enable the upgrade of fructose to DMF directly in a continuous system, the current H CUBE Pro TM hydrogenation system is customized with a second reaction column. A 250 mm x 4.6 mm stainless steel reactor column is connected ahead of the hydrogen insertion, enabling the dehydration of fructose to HMF derivatives, before pumping these products into the second column for hydrogenation. The overall residence time in the two column reactor system is 14 minutes. The overall results are an almost full conversion with a yield of 38.5 % DMF and 47 % yield of EL. The main disadvantage is the formation of higher mass products, so called humins, which start depositing on top of the catalysts, blocking their active sites.
In general it can be stated, that a two column system goes along with a higher investment as well as more maintenance costs, compared to a one column catalytic approach. To develop a catalyst, which is on the one hand able to dehydrate as well as hydrodeoxygenate the reactants, is aimed for at the last part of the thesis. The activated carbon however shows already activity for hydrodeoxygenation without any metal present and offers itself therefore as an alternative to overcome the temperature instability of Amberlyst 15 (max. 120 °C) for a combined DMF production directly from fructose. The activity for the upgrade to DMF is increased from 2 % to 12 % DMF yield in one mixed continuous column.
In order to scale up the entire one column approach, an 800 mm x 28.5 mm inner diameter column was planned and manufactured. The system is scaled up and assembled, whereas this flow reactor system is able to be run with 50 mL min-1 maximum flow rate, to stand a pressure of maximum 100 bar and be heated to around 500 °C. The tubing and connections, as well as the used devices are planned according to be safe and easy in use. The scaled-up approach offers a reaction column 120 times bigger (510 ml) then the first extension of the commercial system. This further extension offers the possibility of ranging between 1 and 1000 mL min-1, making it possible to use the approach in pilot plant applications.
Lignin valorization
(2017)
The topic of this project is the use of lignin as alternative source of aromatic building blocks and oligomers to fossil feedstocks. Lignin is known as the most abundant aromatic polymer in nature and is isolated from the lignocellulosic component of plants by different possible extraction treatments. Both the biomass source and the extraction method affect the structure of the isolated lignin, therefore influencing its further application. Lignin was extracted from beech wood by two different hydrothermal alkaline treatments, which use NaOH and Ba(OH)2 as base and by an acid-catalyzed organosolv process. Moreover, lignin was isolated from bamboo, beech wood and coconut by soda treatment of the biomasses. A comparison of the structural features of such isolated lignins was performed through the use of a wide range of analytical methods. Alkaline lignins resulted in a better candidate as carbon precursor and macromonomers for the synthesis of polymer than organosolv lignin. In fact, alkaline lignins showed higher residual mass after carbonization and higher content of the reactive hydroxy functionalities. In contrast, the lignin source turned out to slightly affect the lignin hydroxyl content.
One of the most common lignin modifications is its deconstruction to obtain aromatic molecules, which can be used as starting materials for the synthesis of fine chemicals. Lignin deconstruction leads to a complex mixture of aromatic molecules. A gas chromatographic analytical method was developed to characterize the mixture of products obtained by lignin deconstruction via heterogeneous catalytic hydrogenolysis. The analytical protocol allowed the quantification of three main groups of molecules by means of calibration curves, internal standard and a preliminary silylation step of the sample. The analytical method was used to study the influence of the hydrogenolysis catalyst, temperature and system (flow and batch reactor) on the yield and selectivity of the aromatic compounds.
Lignin extracted from beech wood by a hydrothermal process using Ba(OH)2 as base, was functionalized by aromatic nitration in order to add nitrogen functionalities. The final goal was the synthesis of a nitrogen doped carbon. Nitrated lignin was reduced to the amino form in order to compare the influence of different nitrogen functionalities on the porosity of the final carbon. The carbons were obtained by ionothermal treatment of the precursors in the presence of the eutectic salt mixture KCl/ZnCl2 Such synthesized carbons showed micro-, macro- and mesoporosity and were tested for their electrocatalytic activity towards the oxygen reduction reaction. Mesoporous carbon derived from nitro lignin displayed the highest electrocatalytic activity.
Lignins isolated from coconut, beech wood and bamboo were used as macromonomers for the synthesis of biobased polyesters. A condensation reaction was performed between lignin and a hyper branched poly(ester-amine), previously obtained by condensation of triethanolamine and adipic acid. The influence of the lignin source and content on the thermochemical and mechanical properties of the final material was investigated. The prepolymer showed adhesive properties towards aluminum and its shear strength was therefore measured. The gluing properties of such synthesized glues turned out to be independent from the lignin source but affected by the amount of lignin in the final material.
This work shows that, although still at a laboratory scale, the valorization of lignin can overcome the critical issues of lignin´s structure variability and complexity.
Ziel der vorliegenden Arbeit war die Synthese und Charakterisierung von anisotropen Goldnanopartikeln in einer geeigneten Polyelektrolyt-modifizierten Templatphase. Der Mittelpunkt bildet dabei die Auswahl einer geeigneten Templatphase, zur Synthese von einheitlichen und reproduzierbaren anisotropen Goldnanopartikeln mit den daraus resultierenden besonderen Eigenschaften. Bei der Synthese der anisotropen Goldnanopartikeln lag der Fokus in der Verwendung von Vesikeln als Templatphase, wobei hier der Einfluss unterschiedlicher strukturbildender Polymere (stark alternierende Maleamid-Copolymere PalH, PalPh, PalPhCarb und PalPhBisCarb mit verschiedener Konformation) und Tenside (SDS, AOT – anionische Tenside) bei verschiedenen Synthese- und Abtrennungsbedingungen untersucht werden sollte.
Im ersten Teil der Arbeit konnte gezeigt werden, dass PalPhBisCarb bei einem pH-Wert von 9 die Bedingungen eines Röhrenbildners für eine morphologische Transformation von einer vesikulären Phase in eine röhrenförmige Netzwerkstruktur erfüllt und somit als Templatphase zur formgesteuerten Bildung von Nanopartikeln genutzt werden kann.
Im zweiten Teil der Arbeit wurde dargelegt, dass die Templatphase PalPhBisCarb (pH-Wert von 9, Konzentration von 0,01 wt.%) mit AOT als Tensid und PL90G als Phospholipid (im Verhältnis 1:1) die effektivste Wahl einer Templatphase für die Bildung von anisotropen Strukturen in einem einstufigen Prozess darstellt. Bei einer konstanten Synthesetemperatur von 45 °C wurden die besten Ergebnisse bei einer Goldchloridkonzentration von 2 mM, einem Gold-Templat-Verhältnis von 3:1 und einer Synthesezeit von 30 Minuten erzielt. Ausbeute an anisotropen Strukturen lag bei 52 % (Anteil an dreieckigen Nanoplättchen von 19 %). Durch Erhöhung der Synthesetemperatur konnte die Ausbeute auf 56 % (29 %) erhöht werden.
Im dritten Teil konnte durch zeitabhängige Untersuchungen gezeigt werden, dass bei Vorhandensein von PalPhBisCarb die Bildung der energetisch nicht bevorzugten Plättchen-Strukturen bei Raumtemperatur initiiert wird und bei 45 °C ein Optimum annimmt.
Kintetische Untersuchungen haben gezeigt, dass die Bildung dreieckiger Nanoplättchen bei schrittweiser Zugabe der Goldchlorid-Präkursorlösung zur PalPhBisCarb enthaltenden Templatphase durch die Dosierrate der vesikulären Templatphase gesteuert werden kann. In umgekehrter Weise findet bei Zugabe der Templatphase zur Goldchlorid-Präkursorlösung bei 45 °C ein ähnlicher, kinetisch gesteuerter Prozess der Bildung von Nanodreiecken statt mit einer maximalen Ausbeute dreieckigen Nanoplättchen von 29 %.
Im letzten Kapitel erfolgten erste Versuche zur Abtrennung dreieckiger Nanoplättchen von den übrigen Geometrien der gemischten Nanopartikellösung mittels tensidinduzierter Verarmungsfällung. Bei Verwendung von AOT mit einer Konzentration von 0,015 M wurde eine Ausbeute an Nanoplättchen von 99 %, wovon 72 % dreieckiger Geometrien hatten, erreicht.
In der vorliegenden Arbeit wurden verschiedene Polymere hergestellt, die bestimmte funktionelle Gruppen beinhalten. Diese Gruppen werden zum Teil durch Alkylketten geschützt, zum Teil liegen sie ungeschützt im Polymer vor. Mit diesen Polymeren wurden Untersuchungen mit knochenähnlichen Materialien sogenanntem Calciumphosphat durchgeführt. Es wurde der Einfluss der verschiedenen Polymere auf die Bildung dieser knochenähnlichen Substanzen untersucht und auch der Einfluss auf die Stabilität und das Auflösungsverhalten der Calciumphosphate. Dabei sollte ein besonderes Augenmerk auf die funktionellen Gruppen, sogenannte Phosphonsäuren und deren Ester, die die Phosphonsäuren schützen, gesetzt werden. Es stellte sich heraus, dass bei der Bildung der knochenähnlichen Materialien die Polymere mit Estergruppen eine leichte Förderung der Calciumphosphat-Bildung verursachen, während die ungeschützten Polymere die Bildung des „Knochenmaterials“ sehr stark verzögern. Dieser Effekt verstärkt sich noch, wenn eine weitere bestimmte Komponente zum Polymer hinzukommt und somit ein Copolymer gebildet wird. Diese Copolymere beschleunigen bzw. verlangsamen die Calciumphosphatbildung noch stärker. Werden Polymere mit einem anderen Polymergerüst aber den gleichen Phosphonsäuresetern in den Seitenketten verwendet, ändert sich der Einfluss der Calciumphosphat-Bildung wenig. Verglichen mit Polymeren ohne solche Phosphonsäuregruppen wird erkennbar, dass es weniger die Phosphonsäuregruppe ist, die die Mineralisation beeinflusst, sondern es eher eine Folge der Säure im Polymer ist.
Wird die Stabilisierung und Auflösung der Knochenähnlichen Substanzen betrachtet, fällt auf, dass auch hier wieder die Säuren den größten Effekt ausüben. Die Phosphonsäuregruppen scheinen dabei jedoch tatsächlich einen besonderen Effekt auszuüben, da bei diesen die Stabilisierung und auch das Auflösungsvermögen von Calciumphospaht von allen untersuchten Polymeren am größten sind.
In der Arbeit konnte außerdem gezeigt werden, dass die Polymere und Copolymere mit Phosphonsäuregruppen einen leicht positiven Effekt auf die Zahngesundheit zeigen. Die Zahl von Bakterien auf der Zahnoberfläche konnte reduziert werden und bei der Untersuchung der Zahnauflösung wurde eine glattere Zahnoberfläche erhalten, jedoch wurde auch mit den untersuchten Polymeren der Zahn im Inneren angegriffen. Weitere Untersuchungen können hier noch genaueren Aufschluss geben. Außerdem sollten auch die Polymere mit dem unterschiedlichen Polymergerüst und Phosphonsäureestergruppen untersucht werden.
Letztere Polymere wurden verwendet, um festere “gelartige“ Polymernetzwerke herzustellen und deren Einfluss auf die Calciumphosphatmineralisation zu untersuchen. Es stellte sich heraus, dass ohne das Einbetten einiger Calciumphosphatteilchen keine Bildung von Calciumphospaht an den Materialien ausgelöst wurde, wurden die sogenannten Hydrogele jedoch mit Calciumphosphatpartikeln geimpft, konnte deutliches weiteres Calciumphosphatwachstum beobachtet werden. Das Material lässt sich auch in verschiedene Formen bringen. Somit könnte das System nach weiteren Untersuchungen zur Verträglichkeit mit Zellen oder Geweben ein mögliches Material für Implantate darstellen, mit denen gezielt Knochenwachstum eingeleitet werden könnte.
This cumulative doctoral dissertation, based on three publications, is devoted to the investigation of several aspects of azobenzene molecular switches, with the aid of computational chemistry.
In the first paper, the isomerization rates of a thermal cis → trans isomerization of azobenzenes for species formed upon an integer electron transfer, i.e., with added or removed electron, are calculated from Eyring’s transition state theory and activation energy barriers, computed by means of density functional theory. The obtained results are discussed in connection with an experimental study of the thermal cis → trans isomerization of azobenzene derivatives in the presence of gold nanoparticles, which is demonstrated to be greatly accelerated in comparison to the same isomerization reaction in the absence of nanoparticles.
The second paper is concerned with electronically excited states of (i) dimers, composed of two photoswitchable units placed closely side-by-side, as well as (ii) monomers and dimers adsorbed on a silicon cluster. A variety of quantum chemistry methods, capable of calculating molecular electronic absorption spectra, based on density functional and wave function theories, is employed to quantify changes in optical absorption upon dimerization and covalent grafting to a surface. Specifically, the exciton (Davydov) splitting between states of interest is determined from first-principles calculations with the help of natural transition orbital analysis, allowing for insight into the nature of excited states.
In the third paper, nonadiabatic molecular dynamics with trajectory surface hopping is applied to model the photoisomerization of azobenzene dimers, (i) for the isolated case (exhibiting the exciton coupling between two molecules) as well as (ii) for the constrained case (providing the van der Waals interaction with environment in addition to the exciton coupling between two monomers). For the latter, the additional azobenzene molecules, surrounding the dimer, are introduced, mimicking a densely packed self-assembled monolayer. From obtained results it is concluded that the isolated dimer is capable of isomerization likewise the monomer, whereas the steric hindrance considerably suppresses trans → cis photoisomerization.
Furthermore, the present dissertation comprises the general introduction describing the main features of the azobenzene photoswitch and objectives of this work, theoretical basis of the employed methods, and discussion of gained findings in the light of existing literature. Also, additional results on (i) activation parameters of the thermal cis → trans isomerization of azobenzenes, (ii) an approximate scheme to account for anharmonicity of molecular vibrations in calculation of the activation entropy, as well as (iii) absorption spectra of photoswitch–silicon composites obtained from time-demanding wave function-based methods are presented.
In der vorliegenden Arbeit konnten erfolgreich zwei unterschiedliche Hybridmaterialien (HM) über die Sol-Gel-Methode synthetisiert werden. Bei den HM handelt es sich um Monolithe mit einem Durchmesser von bis zu 4,5 cm. Das erste HM besteht aus Titandioxid und Bombyx mori Seide und wird als TS bezeichnet, während das zweite weniger Seide und zusätzlich Polyethylenoxid (PEO) enthält und daher als TPS abgekürzt wird. Einige der HM wurden nach der Synthese in eine wässrige Tetrachloridogoldsäure-Lösung getaucht, wodurch sich auf der Oberfläche Goldnanopartikel gebildet haben.
Die Materialien wurden mittels Elektronenmikroskopie, energiedispersiver Röntgenspektroskopie, Ramanspektroskopie sowie Röntgenpulverdiffraktometrie charakterisiert. Die Ergebnisse zeigen, dass beide HM aus etwa 5 nm großen, sphärischen Titandioxidnanopartikeln aufgebaut sind, die primär aus Anatas und zu einem geringen Anteil aus Brookit bestehen. Die Goldnanopartikel bei TPS_Au waren größer und polydisperser als die Goldnanopartikel auf dem TS_Au HM. Darüber hinaus sind die Goldnanopartikel im TS HM tiefer in das Material eingedrungen als beim TPS HM.
Die weiterführende Analyse der HM mittels Elementaranalyse und thermogravimetrischer Analyse ergab für TPS einen geringeren Anteil an organischen Bestandteilen im HM als für TS, obwohl für beide Synthesen die gleiche Masse an organischen Materialien eingesetzt wurde. Es wird vermutet, dass das PEO während der Synthese teilweise wieder aus dem Material herausgewaschen wird. Diese Theorie korreliert mit den Ergebnissen aus der Stickstoffsorption und der Quecksilberporosimetrie, die für das TPS HM eine höhere Oberfläche als für das TS HM anzeigten.
Die Variation einiger Syntheseparameter wie die Menge an Seide und PEO oder die Zusammensetzung der Titandioxidvorläuferlösung hatte einen großen Einfluss auf die synthetisierten HM. Während unterschiedliche Mengen an PEO die Größe des HM beeinflussten, konnte ohne Seide kein HM in einer ähnlichen Größe hergestellt werden. Die Bildung der HM wird stark von der Zusammensetzung der Titandioxidvorläuferlösung beeinflusst. Eine Veränderung führte daher nur selten zur Bildung eines homogenen HM.
Die in dieser Arbeit synthetisierten HM wurden als Photokatalysatoren für die Wasserspaltung und den Abbau von Methylenblau eingesetzt. Bei der photokatalytischen Wasserspaltung wurde zunächst der Einfluss unterschiedlicher Goldkonzentrationen beim TPS HM auf die Wasserstoffausbeute untersucht. Die besten Ergebnisse wurden bei einer Menge von 2,5 mg Tetrachloridogoldsäure erhalten. Darüber hinaus wurde gezeigt, dass mit dem TPS HM eine deutlich höhere Menge an Wasserstoff gewonnen werden konnte als mit dem TS HM. Die Ursachen für die schlechtere Aktivität werden in der geringeren spezifischen Oberfläche, der unterschiedlichen Porenstruktur, dem höheren Anteil an Seide und besonders in der geringeren Größe und höheren Eindringtiefe der Goldnanopartikel vermutet. Darüber hinaus konnte mit einem höheren UV-Anteil in der Lichtquelle sowie durch die Zugabe von Ethanol als Opferreagenz eine Zunahme der Wasserstoffausbeute erzielt werden.
Bei dem Methylenblauabbau wurde für beide HM zunächst nur eine Adsorption des Methylenblaus beobachtet. Nach der Zugabe von Wasserstoffperoxid konnte nach 8 h bereits eine fast vollständige Oxidation des Methylenblaus unter sichtbarem Licht beobachtet werden. Die Ursache für die etwas höhere Aktivität von TPS gegenüber TS wird in der unterschiedlichen Porenstruktur und dem höheren Anteil an Seide im TS HM vermutet. Insgesamt zeigen beide HM eine gute photokatalytische Aktivität für den Abbau von Methylenblau im Vergleich zu den erhaltenen Werten aus der Literatur.
This project was focused on generating ultra thin stimuli responsive membranes with an embedded transmembrane protein to act as the pore. The membranes were formed by crosslinking of transmembrane protein polymer conjugates. The conjugates were self assembled on air water interface and the polymer chains crosslinked using a UV crosslinkable comonomer to engender the membrane. The protein used for the studies reported herein was one of the largest transmembrane channel proteins, ferric hydroxamate uptake protein component A (FhuA), found in the outer membrane of Escherichia coli (E. coli). The wild type protein and three genetic variants of FhuA were provided by the group of Prof. Schwaneberg in Aachen. The well known thermo responsive poly(N isopropylacrylamide) (PNIPAAm) and the pH and thermo responsive polymer poly((2-dimethylamino)ethyl methacrylate) (PDMAEMA) were conjugated to FhuA and the genetic variants via controlled radical polymerization (CRP) using grafting from technique. These polymers were chosen because they would provide stimuli handles in the resulting membranes. The reported polymerization was the first ever attempt to attach polymer chains onto a membrane protein using site specific modification.
The conjugate synthesis was carried out in two steps – a) FhuA was first converted into a macroinitiator by covalently linking a water soluble functional CRP initiator to the lysine residues. b) Copper mediated CRP was then carried out in pure buffer conditions with and without sacrificial initiator to generate the conjugates.
The challenge was carrying out the modifications on FhuA without denaturing it. FhuA, being a transmembrane protein, requires amphiphilic species to stabilize its highly hydrophobic transmembrane region. For the experiments reported in this thesis, the stabilizing agent was 2 methyl 2,4-pentanediol (MPD). Since the buffer containing MPD cannot be considered a purely aqueous system, and also because MPD might interfere with the polymerization procedure, the reaction conditions were first optimized using a model globular protein, bovine serum albumin (BSA). The optimum conditions were then used for the generation of conjugates with FhuA.
The generated conjugates were shown to be highly interfacially active and this property was exploited to let them self assemble onto polar apolar interfaces. The emulsions stabilized by particles or conjugates are referred to as Pickering emulsions. Crosslinking conjugates with a UV crosslinkable co monomer afforded nano thin micro compartments. Interfacial self assembly at the air water interface and subsequent UV crosslinking also yielded nano thin, stimuli responsive membranes which were shown to be mechanically robust. Initial characterization of the flux and permeation of water through these membranes is also reported herein. The generated nano thin membranes with PNIPAAm showed reduced permeation at elevated temperatures owing to the resistance by the hydrophobic and thus water-impermeable polymer matrix, hence confirming the stimulus responsivity.
Additionally, as a part of collaborative work with Dr. Changzhu Wu, TU Dresden, conjugates of three enzymes with current/potential industrial relevance (candida antarctica lipase B, benzaldehyde lyase and glucose oxidase) with stimuli responsive polymers were synthesized. This work aims at carrying out cascade reactions in the Pickering emulsions generated by self assembled enzyme polymer conjugate.
The motivation of this work was to investigate the self-assembly of a block copolymer species that attended little attraction before, double hydrophilic block copolymers (DHBCs). DHBCs consist of two linear hydrophilic polymer blocks. The self-assembly of DHBCs towards suprastructures such as particles and vesicles is determined via a strong difference in hydrophilicity between the corresponding blocks leading to a microphase separation due to immiscibility. The benefits of DHBCs and the corresponding particles and vesicles, such as biocompatibility, high permeability towards water and hydrophilic compounds as well as the large amount of possible functionalizations that can be addressed to the block copolymers make the application of DHBC based structures a viable choice in biomedicine. In order to assess a route towards self-assembled structures from DHBCs that display the potential to act as cargos for future applications, several block copolymers containing two hydrophilic polymer blocks were synthesized. Poly(ethylene oxide)-b-poly(N-vinylpyrrolidone) (PEO-b-PVP) and Poly(ethylene oxide)-b-poly(N-vinylpyrrolidone-co-N-vinylimidazole) (PEO-b-P(VP-co-VIm) block copolymers were synthesized via reversible deactivation radical polymerization (RDRP) techniques starting from a PEO-macro chain transfer agent. The block copolymers displayed a concentration dependent self-assembly behavior in water which was determined via dynamic light scattering (DLS). It was possible to observe spherical particles via laser scanning confocal microscopy (LSCM) and cryogenic scanning electron microscopy (cryo SEM) at highly concentrated solutions of PEO-b-PVP. Furthermore, a crosslinking strategy with (PEO-b-P(VP-co-VIm) was developed applying a diiodo derived crosslinker diethylene glycol bis(2-iodoethyl) ether to form quaternary amines at the VIm units. The formed crosslinked structures proved stability upon dilution and transfer into organic solvents. Moreover, self-assembly and crosslinking in DMF proved to be more advantageous and the crosslinked structures could be successfully transferred to aqueous solution. The afforded spherical submicron particles could be visualized via LSCM, cryo SEM and Cryo TEM.
Double hydrophilic pullulan-b-poly(acrylamide) block copolymers were synthesized via copper catalyzed alkyne azide cycloaddition (CuAAC) starting from suitable pullulan alkyne and azide functionalized poly(N,N-dimethylacrylamide) (PDMA) and poly(N-ethylacrylamide) (PEA) homopolymers. The conjugation reaction was confirmed via SEC and 1H-NMR measurements. The self-assembly of the block copolymers was monitored with DLS and static light scattering (SLS) measurements indicating the presence of hollow spherical structures. Cryo SEM measurements could confirm the presence of vesicular structures for Pull-b-PEA block copolymers. Solutions of Pull-b-PDMA displayed particles in cryo SEM. Moreover, an end group functionalization of Pull-b-PDMA with Rhodamine B allowed assessing the structure via LSCM and hollow spherical structures were observed indicating the presence of vesicles, too.
An exemplified pathway towards a DHBC based drug delivery vehicle was demonstrated with the block copolymer Pull-b-PVP. The block copolymer was synthesized via RAFT/MADIX techniques starting from a pullulan chain transfer agent. Pull-b-PVP displayed a concentration dependent self-assembly in water with an efficiency superior to the PEO-b-PVP system, which could be observed via DLS. Cryo SEM and LSCM microscopy displayed the presence of spherical structures. In order to apply a reversible crosslinking strategy on the synthesized block copolymer, the pullulan block was selectively oxidized to dialdehydes with NaIO4. The oxidation of the block copolymer was confirmed via SEC and 1H-NMR measurements. The self-assembled and oxidized structures were subsequently crosslinked with cystamine dihiydrochloride, a pH and redox responsive crosslinker resulting in crosslinked vesicles which were observed via cryo SEM. The vesicular structures of crosslinked Pull-b-PVP could be disassembled by acid treatment or the application of the redox agent tris(2-carboxyethyl)-phosphin-hydrochloride. The successful disassembly was monitored with DLS measurements.
To conclude, self-assembled structures from DHBCs such as particles and vesicles display a strong potential to generate an impact on biomedicine and nanotechnologies. The variety of DHBC compositions and functionalities are very promising features for future applications.
Nowadays, the need to protect the environment becomes more urgent than ever. In the field of chemistry, this translates to practices such as waste prevention, use of renewable feedstocks, and catalysis; concepts based on the principles of green chemistry. Polymers are an important product in the chemical industry and are also in the focus of these changes. In this thesis, more sustainable approaches to make two classes of polymers, polypeptoids and polyesters, are described.
Polypeptoids or poly(alkyl-N-glycines) are isomers of polypeptides and are biocompatible, as well as degradable under biologically relevant conditions. In addition to that, they can have interesting properties such as lower critical solution temperature (LCST) behavior. They are usually synthesized by the ring opening polymerization (ROP) of N-carboxy anhydrides (NCAs), which are produced with the use of toxic compounds (e.g. phosgene) and which are highly sensitive to humidity. In order to avoid the direct synthesis and isolation of the NCAs, N-phenoxycarbonyl-protected N-substituted glycines are prepared, which can yield the NCAs in situ. The conditions for the NCA synthesis and its direct polymerization are investigated and optimized for the simplest N-substituted glycine, sarcosine. The use of a tertiary amine in less than stoichiometric amounts compared to the N-phenoxycarbonyl--sarcosine seems to accelerate drastically the NCA formation and does not affect the efficiency of the polymerization. In fact, well defined polysarcosines that comply to the monomer to initiator ratio can be produced by this method. This approach was also applied to other N-substituted glycines.
Dihydroxyacetone is a sustainable diol produced from glycerol, and has already been used for the synthesis of polycarbonates. Here, it was used as a comonomer for the synthesis of polyesters. However, the polymerization of dihydroxyacetone presented difficulties, probably due to the insolubility of the macromolecular chains. To circumvent the problem, the dimethyl acetal protected dihydroxyacetone was polymerized with terephthaloyl chloride to yield a soluble polymer. When the carbonyl was recovered after deprotection, the product was insoluble in all solvents, showing that the carbonyl in the main chain hinders the dissolution of the polymers. The solubility issue can be avoided, when a 1:1 mixture of dihydroxyacetone/ ethylene glycol is used to yield a soluble copolyester.
I. Ceric ammonium nitrate (CAN) mediated thiocyanate radical additions to glycals
In this dissertation, a facile entry was developed for the synthesis of 2-thiocarbohydrates and their transformations. Initially, CAN mediated thiocyanation of carbohydrates was carried out to obtain the basic building blocks (2-thiocyanates) for the entire studies. Subsequently, 2-thiocyanates were reduced to the corresponding thiols using appropriate reagents and reaction conditions. The screening of substrates, stereochemical outcome and the reaction mechanism are discussed briefly (Scheme I).
Scheme I. Synthesis of the 2-thiocyanates II and reductions to 2-thiols III & IV.
An interesting mechanism was proposed for the reduction of 2-thiocyanates II to 2-thiols III via formation of a disulfide intermediate. The water soluble free thiols IV were obtained by cleaving the thiocyanate and benzyl groups in a single step. In the subsequent part of studies, the synthetic potential of the 2-thiols was successfully expanded by simple synthetic transformations.
II. Transformations of the 2-thiocarbohydrates
The 2-thiols were utilized for convenient transformations including sulfa-Michael additions, nucleophilic substitutions, oxidation to disulfides and functionalization at the anomeric position. The diverse functionalizations of the carbohydrates at the C-2 position by means of the sulfur linkage are the highlighting feature of these studies. Thus, it creates an opportunity to expand the utility of 2-thiocarbohydrates for biological studies.
Reagents and conditions: a) I2, pyridine, THF, rt, 15 min; b) K2CO3, MeCN, rt, 1 h; c) MeI, K2CO3, DMF, 0 °C, 5 min; d) Ac2O, H2SO4 (1 drop), rt, 10 min; e) CAN, MeCN/H2O, NH4SCN, rt, 1 h; f) NaN3, ZnBr2, iPrOH/H2O, reflux, 15 h; g) NaOH (1 M), TBAI, benzene, rt, 2 h; h) ZnCl2, CHCl3, reflux, 3 h.
Scheme II. Functionalization of 2-thiocarbohydrates.
These transformations have enhanced the synthetic value of 2-thiocarbohydrates for the preparative scale. Worth to mention is the Lewis acid catalyzed replacement of the methoxy group by other nucleophiles and the synthesis of the (2→1) thiodisaccharides, which were obtained with complete β-selectivity. Additionally, for the first time, the carbohydrate linked thiotetrazole was synthesized by a (3 + 2) cycloaddition approach at the C-2 position.
III. Synthesis of thiodisaccharides by thiol-ene coupling.
In the final part of studies, the synthesis of thiodisaccharides by a classical photoinduced thiol-ene coupling was successfully achieved.
Reagents and conditions: 2,2-Dimethoxy-2-phenylacetophenone (DPAP), CH2Cl2/EtOH, hv, rt.
Scheme III. Thiol-ene coupling between 2-thiols and exo-glycals.
During the course of investigations, it was found that the steric hindrance plays an important role in the addition of bulky thiols to endo-glycals. Thus, we successfully screened the suitable substrates for addition of various thiols to sterically less hindered alkenes (Scheme III). The photochemical addition of 2-thiols to three different exo-glycals delivered excellent regio- and diastereoselectivities as well as yields, which underlines the synthetic potential of this convenient methodology.
In the present work side-chain polystyrenes were synthesized and characterized, in order to be applied in multilayer OLEDs fabricated by solution process techniques. Manufacture of optoelectronic devices by solution process techniques is meant to decrease significantly fabrication cost and allow large scale production of such devices.
This dissertation focusses in three series, enveloped in two material classes. The two classes differ to each other in the type of charge transport exhibited, either ambipolar transport or electron transport. All materials were applied in all-organic solution processed green Ir-based devices.
In the first part, a series of ambipolar host materials were developed to transport both charge types, holes and electrons, and be applied especially as matrix for green Ir-based emitters. It was possible to increase devices efficacy by modulating the predominant charge transport type. This was achieved by modification of molecules electron transport part with more electron-deficient heterocycles or by extending the delocalization of the LUMO. Efficiencies up to 28.9 cd/A were observed for all-organic solution-process three layer devices.
In the second part, suitability of triarylboranes and tetraphenylsilanes as electron transport materials was studied. High triplet energies were obtained, up to 2.95 eV, by rational combination of both molecular structures. Although the combination of both elements had a low effect in materials electron transport properties, high efficiencies around 24 cd/A were obtained for the series in all-organic solution-processed two layer devices.
In the last part, benzene and pyridine were chosen as the series electron-transport motif. By controlling the relative pyridine content (RPC) solubility into methanol was induced for polystyrenes with bulky side-chains. Materials with RPC ≥ 0.5 could be deposited orthogonally from solution without harming underlying layers. From the best of our knowledge, this is the first time such materials are applied in this architecture showing moderate efficiencies around 10 cd/A in all-organic solution processed OLEDs.
Overall, the outcome of these studies will actively contribute to the current research on materials for all-solution processed OLEDs.
In Zeiten eines sich schnell ändernden und vielseitigen Energiemarktes müssen Kohlenstoffmaterialien für verschiedene Anforderungen einsetzbar sein. Dies erfordert flexibel synthetisierbare Kohlenstoffmaterialien bevorzugt aus günstigen und nachhaltigen Kohlenstoffquellen. Es ist allerdings nicht leicht Vorläuferverbindungen auszumachen, welche sich einerseits für verschiedene Herstellungsverfahren eignen und deren Kohlenstoffprodukte andererseits in spezifischen Eigenschaften, wie der Struktur, des Stickstoffanteils, der Oberfläche und der Porengrößen, eingestellt werden können. In diesem Zusammenhang können natürliche Polyphenole, etwa überschüssige Tannine aus der Weinproduktion, eine neue Welt zu hoch funktionalen und vielseitig einstellbaren Kohlenstoffmaterialien mit hohen Ausbeuten öffnen.
Das Hauptziel dieser vorliegenden Thesis war es neue funktionale, einstellbare und skalierbare nanostrukturierte Kohlenstoffmaterialien aus Tanninen (insbesondere Tanninsäure) für unterschiedliche elektrochemische Zwecke zu synthetisieren und zu charakterisieren. Ermöglicht wurde dies durch unterschiedliche synthetische Herangehensweisen, wie etwa der polymeren Strukturdirektion, dem ionothermalen Templatieren und der weichen Templatierung. An Stelle des weitläufig gebräuchlichen, aber kanzerogenen Vernetzungsagens Formaldehyd wurden bei den vorgestellten Synthesen Harnstoff und Thioharnstoff gewählt, um zugleich die synthetisierten Kohlenmaterialien variabel dotieren zu können.
Daher wurden im ersten Teil der Arbeit die Wechselwirkungen, Reaktionen und thermischen Verhaltensweisen von Tanninsäure und Mixturen von Tanninsäure und Harnstoff bzw. Thioharnstoff untersucht, um daraus wichtige Erkenntnisse für die verschiedenen Kohlenstoffsynthesen zu gewinnen.
Durch die Verwendung eines polymeren Strukturierungsagenz Pluronic P123 konnten in einer ersten Kohlenstoffsynthese nachhaltige und dotierbare Kohlenstoffpartikel mit Durchmessern im Nanometerbereich aus Tanninsäure und Harnstoff hergestellt werden. Es konnte dabei gezeigt werden, dass durch die Modifikation der verschiedenen Syntheseparameter die Kohlenstoffnanopartikel gemäß ihres gemittelten Partikeldurchmessers, ihrer BET-Oberfläche, ihrer Komposition, ihrer Leitfähigkeit und ihrer chemischen Stabilität einstellbar sind. Dies eröffnete die Möglichkeit diese Kohlenstoffpartikel als alternatives und nachhaltiges Rußmaterial einzusetzen.
Weiterhin war es durch die ionothermale Templatierung möglich poröse, dotierte und kontrollierbare Kohlenstoffpartikel mit hohen spezifischen Oberflächen aus den gewählten Präkursorverbindungen zu synthetisieren, die sich für den Einsatz in Superkondensatoren eignen.
Auf diesen Erkenntnissen aufbauend konnten mittels der Rotationsbeschichtung poröse binderfreie und strukturierte Kohlenstofffilme synthetisiert werden, die eine spinodale Struktur aufwiesen. Anhand der Modifikation der Stammlösungskonzentration, der Rotationsgeschwindigkeit und der verwendeten Substrate konnten die Filmdicke (100-1000 nm), die Morphologie und Gesamtoberfläche gezielt beeinflusst werden. Die erweiterte elektrochemische Analyse zeigte außerdem ein sehr gut zugängliches Porensystem der porösen Kohlenstofffilme.
Allumfassend konnten demnach verschiedene Synthesewege für Kohlenstoffmaterialien aus Tanninen aufgezeigt werden, die verschiedenartig strukturiert und kontrolliert werden können und sich für diverse Anwendungsgebiete eignen.