Refine
Has Fulltext
- yes (19) (remove)
Year of publication
- 2012 (19) (remove)
Document Type
- Doctoral Thesis (19)
Is part of the Bibliography
- yes (19)
Keywords
- Korrosion (2)
- Nanopartikel (2)
- Quantenpunkte (2)
- corrosion (2)
- quantum dots (2)
- AC -Impedance (1)
- AC Impedanz (1)
- ATRP (1)
- Abbau (1)
- Abstandsverteilungen (1)
- Aerogele (1)
- Aerogels (1)
- Aluminiumlegierung (1)
- Amphiphile Polymere (1)
- Assoziative Verdicker (1)
- Atom Transfer Radical Polymerization (1)
- BLUF (1)
- Beschichtungen (1)
- Betulin (1)
- Bioconjugation (1)
- Biokonjugation (1)
- Biomass (1)
- Biomasse (1)
- Blockcopolymere (1)
- Carbon materials (1)
- Chelate (1)
- Click Chemistry (1)
- Click chemistry (1)
- Collagenase (1)
- Degradation (1)
- Einkapselung (1)
- Electrocatalysis (1)
- Elektrokatalyse (1)
- Enegieanwendungen (1)
- Energy Applications (1)
- FRET (1)
- Fest-Flüssig-Extraktion (1)
- Festelektrolyten (1)
- Flüssig-Flüssig-Extraktion (1)
- Formgedächtnispolymere (1)
- Functionalization (1)
- Funktionalisierung (1)
- Gaspermeation (1)
- Gelatin (1)
- Gelatine (1)
- Gold (1)
- Green Chemistry (1)
- Grüne Chemie (1)
- Harnstoff-Glas-Route (1)
- Heteroatom Doping (1)
- Heteroatom-Dotierung (1)
- Heteroatom-dotierte Kohlenstoffe (1)
- Hohlkugeln (1)
- Hollow Spheres (1)
- Hyaluronic acid (1)
- Hyaluronsäure (1)
- Hydrothermal Carbonization (1)
- Hydrothermale Karbonisierung (1)
- Kerndynamik (1)
- Klick-Chemie (1)
- Klickchemie (1)
- Kohlenmaterialien (1)
- Kollagenase (1)
- LCST (1)
- Ladungstransport (1)
- Lanthanoidkomplexe (1)
- Li-Batterien (1)
- Li-batteries (1)
- Ligandendesign (1)
- Lithium ion battery (1)
- Lithium-Ionen-Batterie (1)
- Metallnitrid-Kohlenstoff Komposite (1)
- Modifizierung von Polymeren (1)
- Morphologie von Kapseln (1)
- Nachhaltigkeit (1)
- Nano (1)
- Nanostäbchen (1)
- Nanotechnologie (1)
- Naturstoff (1)
- Nitride (1)
- Nitrides (1)
- OFET (1)
- Oberflächen (1)
- Oberflächenplasmonenlasmonen (1)
- Oxinitride (1)
- Oxynitrides (1)
- Palladium (1)
- Photoanregung (1)
- Photoexcitation (1)
- Polyeste r (1)
- Polymer Modification (1)
- Poröse Materialien (1)
- Quantum dynamics (1)
- RAFT (1)
- RAFT polymerisation (1)
- RAFT-Polymerisation (1)
- Riboflavin (1)
- STM (1)
- Salts (1)
- Salze (1)
- Schwefel-Ligand (1)
- Selbstheilende Beschichtungen (1)
- Selbstorganisation (1)
- Silika (1)
- Sternpolymere (1)
- Superkondensator (1)
- Sustainability (1)
- Synthese (1)
- Thiophen und Benzodithiophen Copolymere (1)
- Thiophene and Benzodithiophene copolymers (1)
- Urea-Glas-Route (1)
- Vibronik (1)
- [2+2]-Cycloaddition (1)
- [2+2]-cycloaddition (1)
- ab-initio Dynamik (1)
- ab-initio dynamics (1)
- active polymers (1)
- aktive Polymere (1)
- aluminum alloy (1)
- amphiphilic polymers (1)
- associative thickeners (1)
- block copolymers (1)
- capsule morphology (1)
- charge transfer (1)
- chelates (1)
- coating (1)
- conjugated small molecules (1)
- distance distribution (1)
- encapsulation (1)
- flüssigkristalline Netzwerke (1)
- gas permeation (1)
- gold (1)
- heteroatom-doped carbons (1)
- ionic liquids (1)
- ionische Flüssigkeiten (1)
- konjugierte kleine Moleküle (1)
- lanthanide complexes (1)
- ligand design (1)
- liquid-crystalline elastomers (1)
- mesoporous (1)
- mesoporös (1)
- metal nitride carbon composites (1)
- microporous polymers (1)
- mikroporöse Polymere (1)
- molecular switches (1)
- molekulare Schalter (1)
- multi-stimuli sensitiv materials (1)
- multi-stimuli sensitive Materialien (1)
- nanoparticles (1)
- nanorods (1)
- nanotechnology (1)
- organic semiconductors (1)
- organische Halbleiter (1)
- palladium (1)
- polyesters (1)
- porous materials (1)
- renewable resources (1)
- self-assembly (1)
- self-healing coatings (1)
- shape-memory polymers (1)
- silica nanoparticles (1)
- solid phase extraction (1)
- solid-state-electrolyte (1)
- solvent extraction (1)
- spectroscopic ruler (1)
- spektroskopisches Lineal (1)
- star polymers (1)
- sulfur ligands (1)
- supercapacitors (1)
- surface plasmons (1)
- surfaces (1)
- synthesis (1)
- thermisch schaltbar (1)
- thermoresponsive (1)
- vibronics (1)
Institute
- Institut für Chemie (19) (remove)
Taking advantage of ATRP and using functionalized initiators, different functionalities were introduced in both α and ω chain-ends of synthetic polymers. These functionalized polymers could then go through modular synthetic pathways such as click cycloaddition (copper-catalyzed or copper-free) or amidation to couple synthetic polymers to other synthetic polymers, biomolecules or silica monoliths. Using this general strategy and designing these co/polymers so that they are thermoresponsive, yet bioinert and biocompatible with adjustable cloud point values (as it is the case in the present thesis), the whole generated system becomes "smart" and potentially applicable in different branches. The applications which were considered in the present thesis were in polymer post-functionalization (in situ functionalization of micellar aggregates with low and high molecular weight molecules), hydrophilic/hydrophobic tuning, chromatography and bioconjugation (enzyme thermoprecipitation and recovery, improvement of enzyme activity). Different α-functionalized co/polymers containing cholesterol moiety, aldehyde, t-Boc protected amine, TMS-protected alkyne and NHS-activated ester were designed and synthesized in this work.
In this work, the synthesis of biopolymer-based hydrogel networks with defined architecture is presented. In order to obtain materials with defined properties, the chemoselective copper-catalyzed azide-alkyne cycloaddition (or Click Chemistry) was used for the synthesis of gelatin-based hydrogels. Alkyne-functionalized gelatin was reacted with four different diazide crosslinkers above its sol-gel transition to suppress the formation of triple helices. By variation of the crosslinking density and the crosslinker flexibility, the swelling (Q: 150-470 vol.-%;) and the Young’s and shear moduli (E: 50 kPa - 635 kPa, G’: 0.1 kPa - 16 kPa) could be tuned in the kPa range. In order to understand the network structure, a method based on the labelling of free functional groups within the hydrogel was developed. Gelatin-based hydrogels were incubated with alkyne-functionalized fluorescein to detect the free azide groups, resulting from the formation of dangling chains. Gelatin hydrogels were also incubated with azido-functionalized fluorescein to check the presence of alkyne groups available for the attachment of bioactive molecules. By using confocal laser scanning microscopy and fluorescence spectroscopy, the amount of crosslinking, grafting and free alkyne groups could be determined. Dangling chains were observed in samples prepared by using an excess of crosslinker and also when using equimolar amounts of alkyne:azide. In the latter case the amount of dangling chains was affected by the crosslinker structure. Specifically, 0.1% of dangling chains were found using 4,4’-diazido-2,2’-stilbene-disulfonic acid as cosslinker, 0.06% with 1,8-diazidooctane, 0.05% with 1,12-diazidododecane and 0.022 % with PEG-diazide. This observation could be explained considering the structure of the crosslinkers. During network formation, the movements of the gelatin chains are restricted due to the formation of covalent netpoints. A further crosslinking will be possible only in the case of crosslinker that are flexible and long enough to reach another chain. The method used to obtain defined gelatin-based hydrogels enabled also the synthesis of hyaluronic acid-based hydrogels with tailorable properties. Alkyne-functionalized hyaluronic acid was crosslinked with three different linkers having two terminal azide functionalities. By variation of the crosslinking density and crosslinker type, hydrogels with elastic moduli in the range of 0.5-3 kPa have been prepared. The variation of the crosslinking density and crosslinker type had furthermore an influence also on the hydrolytic and enzymatic degradation of gelatin-based hydrogels. Hydrogels with a low crosslinker amount experienced a faster decrease in mass loss and elastic modulus compared to hydrogels with higher crosslinker content. Moreover, the structure of the crosslinker had a strong influence on the enzymatic degradation. Hydrogels containing a crosslinker with a rigid structure were much more resistant to enzymatic degradation than hydrogels containing a flexible crosslinker. During hydrolytic degradation, the hydrogel became softer while maintaining the same outer dimensions. These observations are in agreement with a bulk degradation mechanism, while the decrease in size of the hydrogels during enzymatic degradation suggested a surface erosion mechanism. Because of the use of small amount of crosslinker (0.002 mol.% 0.02 mol.%) the networks synthesized can still be defined as biopolymer-based hydrogels. However, they contain a small percentage of synthetic residues. Alternatively, a possible method to obtain biopolymer-based telechelics, which could be used as crosslinkers, was investigated. Gelatin-based fragments with defined molecular weight were obtained by controlled degradation of gelatin with hydroxylamine, due to its specific action on asparaginyl-glycine bonds. The reaction of gelatin with hydroxylamine resulted in fragments with molecular weights of 15, 25, 37, and 50 kDa (determined by SDS-PAGE) independently of the reaction time and conditions. Each of these fragments could be potentially used for the synthesis of hydrogels in which all components are biopolymer-based materials.
Typische assoziative Verdicker für wässrige Systeme basieren auf linearen, doppelt hydrophob endmodifizierten Poly(ethylenglykolen) (PEGs). Diese Polymere aggregieren aufgrund ihrer Struktur in wässriger Lösung und bilden ein Netzwerk aus verbrückten Polymer-Mizellen. Dabei kann ein Polymer-Molekül maximal zwei Mizellen miteinander verbinden. Bisher ist unklar, wie die Anzahl der Endgruppen eines verzweigten, mehrfach hydrophob endmodifizierten hydrophilen Polymers die Struktur und Dynamik solcher Netzwerke beeinflusst. Die Synthese verzweigter Polymere auf PEG-Basis erfolgt mittels lebender ionischer Polymerisation und ist experimentell aufwändig. Das Einführen hydrophober Endgruppen erfordert zusätzliche Synthese-Schritte. In dieser Arbeit wurden hydrophile Sternpolymere mit hydrophoben Endgruppen in einem Schritt hergestellt. Dazu wurde die Technik der radikalischen Polymerisation unter Kettenübertragung durch reversible Addition und anschließende Fragmentierung (reversible addition-fragmentation chain transfer, RAFT) genutzt. Die Synthese der Sternpolymere erfolgte von einem multifunktionalen Kern, der die R-Gruppe der RAFT-Kettenüberträger (chain transfer agents, CTAs) bildete. Die dazu benötigten CTAs wurden so konzipiert, dass mit ihrer Hilfe sowohl die Anzahl der Arme des Sternpolymers (von 2 bis 4), als auch die Länge der hydrophoben Endgruppe (C4, C12, C18) variiert werden konnte. Der große Vorteil der RAFT-Polymerisation ist, dass sie viele polare Monomere für die Synthese der hydrophilen Arme des Sternpolymers toleriert. In dieser Arbeit wurden als Modell-Monomere Oligo(ethylenglykol)methylether-acrylat (OEGA) und N,N-Dimethylacrylamid (DMA) eingesetzt. Beide Monomere bilden nicht-ionische hydrophile Polymere. Poly(OEGA) ist ein Kammpolymer, das auf PEG basiert. Poly(DMA) besitzt dagegen eine deutlich kompaktere Struktur. Die erhaltenen amphiphilen Sternpolymere wurden umfassend molekular charakterisiert. Die Molmassen wurden mit verschiedenen GPC-Systemen bestimmt und der Grad der Endgruppenfunktionalisierung wurde mittels UV/Vis- und 1H-NMR-Spektroskopie überprüft. Die Polymerisation von OEGA zeigt mit den CTAs einige Charakteristika der Polymerisation mit reversibler Deaktivierung (RDRP, auch „kontrollierte radikalische Polymerisation“), wird aber durch Kettenübertragung zum Monomer bzw. Polymer gestört. Diese Nebenreaktion ist auf die Struktur des Monomers als Oligoether zurückzuführen. Bei allen untersuchten Polymerisationen von DMA mit den multifunktionalen CTAs steigt die Molmasse linear mit dem Umsatz. Die erhaltenen Polymere zeigen durchweg monomodale und enge Molmassenverteilungen (PDI ≤ 1,2). Die Molmassen lassen sich in einem weiten Bereich von 25 kg/mol bis 150 kg/mol einstellen und die Endgruppen der Polymere bleiben zu 90 % erhalten. Während die Polymerisation von DMA sowohl mit den di- als auch den trifunktionalen CTAs innerhalb von 3 h zu quantitativen Umsätzen verläuft, wird der quantitative Umsatz des Monomers bei der Polymerisation mit tetrafunktionalen CTAs erst nach 4 h erreicht. Diese Verzögerung ist auf eine Retardierung in der Anfangsphase der Polymerisation zurückzuführen, die sich aus der besonderen Struktur der tetrafunktionalen CTAs erklärt. Auf dem System zur Polymerisation von DMA aufbauend ließen sich Gradienten-Block-Copolymere in Eintopfreaktionen herstellen. Dazu wurde nach Erreichen des quantitativen Umsatzes von DMA ein zweites Monomer zur Reaktionsmischung gegeben. Mit Ethylacrylat (EtA) wurden so lineare amphiphile symmetrische Triblock-Copolymere erhalten. Dabei wurde die Länge des hydrophoben Blocks durch unterschiedliche Mengen an EtA variiert. Mit N,N-Diethylacrylamid (DEA) wurden lineare symmetrische Triblock-Copolymere sowie 3-Arm Stern-Diblock-Copolymere hergestellt, die über einen thermisch schaltbaren zweiten Block verfügen. Bei diesen Polymeren lässt sich die Länge des hydrophoben Teils in situ durch Veränderung der Temperatur variieren. Das Verhalten der amphiphilen Sternpolymere in wässriger Lösung und in Mikroemulsion wurde im Rahmen einer Kooperation an der TU Berlin mit Hilfe von Kleinwinkel-Neutronenstreuung (SANS), dynamischer Lichtstreuung (DLS) und Rheologie untersucht. Die Polymere wirken durch Assoziation der hydrophoben Endgruppen als effektive Verdicker sowohl allein in wässriger Lösung als auch in Mikroemulsion. Die Struktur des gebildeten Netzwerks hängt dabei von der Konzentration des Polymers in der Lösung und der Länge der Endgruppe (Hydrophobie) ab. Die dynamischen Eigenschaften der Lösungen werden außerdem durch die Anzahl der Arme der Polymere bestimmt.
Entwicklung multi-stimuli sensitiver Materialien auf der Basis von flüssigkristallinen Elastomeren
(2012)
Aufgrund der zunehmenden technischen Ansprüche der Gesellschaft sind sich aktiv bewegende Polymere in den Mittelpunkt aktueller Forschung gerückt. Diese spielen bei Anwen-dungen im Bereich von künstlichen Muskeln und Implantaten für die minimal invasive Chirurgie eine wichtige Rolle. Vor allem Formänderungs- und Formgedächtnispolymere stehen dabei im wissenschaftlichen Fokus. Während die kontaktlose Deformation einer permanenten Form in eine temporäre metastabile Form, charakteristisch für Formände-rungspolymere ist, kann bei Formgedächtnis-Materialien die temporäre Form, aufgrund der Ausbildung reversibler, temporärer Netzpunkte, fixiert werden. Ein Polymermaterial, das eine Kombination beider Funktionen aufweist würde zu einem Material führen welches kontaktlos in eine temporäre Form deformiert und in dieser fixiert werden kann. Zusätzlich würde aufgrund der kontaktlosen Deformation die Reversibilität dieser Funktion gewähr-leistet sein. Ein solches Material ist bislang noch nicht beschrieben worden. In dieser Arbeit wird untersucht, ob durch die Kopplung zweier separat schaltbarer, be-kannter Funktionen eine neue schaltbare Funktion erzielt werden kann. Daher wurden multi-stimuli sensitive Materialien entwickelt die eine Kopplung des Formänderungs- und des Formgedächtniseffektes aufweisen. Dazu wurden zwei Konzepte entwickelt, die sich hinsichtlich der Reihenfolge der verwendeten Stimuli unterscheiden. Im ersten Konzept wurden flüssigkristalline Elastomere basie-rend auf Azobenzenderivaten aufgebaut und hinsichtlich der Kombination des licht-induzierten Formänderungseffektes mit dem thermisch-induzierten Formgedächtniseffekt untersucht. Diese orientierten Netzwerke weisen oberhalb der Glasübergangstemperatur (Tg) eine kontaktlose Verformung (Biegung) durch Bestrahlung mit UV-Licht des geeigneten Wellenlängenbereichs auf, wodurch eine temporäre Form erhalten wurde. Hierbei spielt der Vernetzungsgrad eine entscheidende Rolle bezüglich der Ausprägung dieser Biegung. Eine fixierte, temporäre Form konnte durch gleichzeitiges Abkühlen des Materials unterhalb von Tg während der Bestrahlung mit UV-Licht erhalten werden. Nach erneutem Aufheizen über Tg konnte die Originalform wiederhergestellt werden. Dieser Vorgang konnte reversibel durchgeführt werden. Damit wurde gezeigt, dass eine neue schaltbare Funktion erzielt wurde, die auf der Kopplung des lichtinduzierten Formänderungs- mit dem thermisch-induzierten Formgedächtniseffekt basiert. Die Abstimmung der einzelnen Funktion wird in diesem Konzept über die Morphologie des Systems gewährleistet. Diese neue Funktion ermöglicht eine kontaktlose Deformation des Materials in eine temporäre Form, welche fixiert werden kann. Im zweiten Konzept wurde eine Kopplung des thermisch induzierten Formänderungs- mit dem licht-induzierten Formgedächtniseffekt angestrebt. Um dies zu realisieren wurden nematisch, flüssigkristalline Hauptkettenelastomere (NMC-LCE) entwickelt, die eine nied-rige Übergangstemperatur der nematischen in die isotrope Phase (TNI), als auch einen aus-geprägten thermisch induzierten Formänderungseffekt aufweisen. Zusätzlich wurde eine photosensitive Schicht aufgebaut, die Cinnamylidenessigsäuregruppen in der Seitenkette eines Polysiloxanrückgrates aufweist. Die Reversibilität der photoinduzierten [2+2]-Cycloaddition konnte für dieses photosensitive Polymer beobachtet werden, wodurch die-ses Polymersystem in der Lage ist reversible temporäre Netzpunkte, aufgrund der Bestrah-lung mit UV-Licht, auszubilden. Die kovalente Anbindung der photosensitiven Schicht an die Oberfläche des flüssigkristallinen Kerns wurde erfolgreich durchgeführt, wodurch ein Multi-Komponenten-System aufgebaut wurde. Die Kombination des thermisch-induzierten Formänderungs- mit dem licht-induzierten Formgedächtniseffektes wurde anhand dieses Systems untersucht. Während die Einzelkomponenten die erforderliche Funktion zeigten, ist hier noch Arbeit in der Abstimmung beider Strukturen zu leisten. Insbesondere die Variation der Schichtdicken beider Komponenten steht im Fokus zukünftiger Arbeiten. In dieser Arbeit wurde durch die Kopplung von zwei separat schaltbaren, bekannten Funktionen eine neue schaltbare Funktion erzielt. Dies setzt voraus, dass die Einzelkomponenten hinsichtlich einer Funktion schaltbar sind und in einem Material integriert werden können. Des Weiteren müssen die beiden Funktionen mit unterschiedlichen Stimuli geschaltet werden. Ein wichtiger Schritt bei der Kopplung der Funktionen, ist die Abstimmung der beiden Komponenten. Dies kann über die Variation der Morphologie oder der Struktur erzielt werden. Anhand der Vielzahl der vorhandenen stimuli-sensitiven Materialien sind verschiedene Kopplungsmöglichkeiten vorhanden. Demnach wird erwartet, dass auf diesem Gebiet weitere neue Funktionen erzielt werden können.
Für den Einsatz in Autobatterien gibt es besondere Anforderungen an den Elektrolyten im Bereich der Energie- und Leistungsdichten, um beispielsweise thermische Verluste gering zu halten. Hochleitfähige Elektrolyte mit Leitfähigkeiten im Millisiemensbereich sind hier ebenso notwendig wie auch sichere, d.h. möglichst nicht brennbare und einen niedrigen Dampfdruck besitzende Materialien. Um diese Vorgaben zu erreichen, ist es notwendig, einen polymeren Separator zu entwickeln, welcher auf brennbare organische Lösungsmittel verzichtet und damit eine drastische Steigerung der Sicherheit gewährleistet. Gleichzeitig müssen hierbei die Leistungsvorgaben bezüglich der Leitfähigkeit erfüllt werden. Zu diesem Zweck wurde ein Konzept basierend auf der Kombination von einer polymeren sauerstoffreichen Matrix und einer ionischen Flüssigkeit entwickelt und verifiziert. Dabei wurden folgende Erkenntnisse gewonnen: 1. Es wurden neuartige diacrylierte sauerstoffreiche Matrixkomponenten mit vielen Carbonylfunktionen, für eine gute Lithiumleitfähigkeit, synthetisiert. 2. Es wurden mehrere neue ionische Flüssigkeiten sowohl auf Imidazolbasis als auch auf Ammoniumbasis synthetisiert und charakterisiert. 3. Die Einflüsse der Kationenstruktur und der Einfluss der Gegenionen im Bezug auf Schmelzpunkte und Leitfähigkeiten wurden untersucht. 4. Aus den entwickelten Materialien wurden Blendsysteme hergestellt und mittels Impedanzspektrometrie untersucht: Leitfähigkeiten von 10-4S/cm bei Raumtemperatur sind realisierbar. 5. Die Blendsysteme wurden auf ihre thermische Stabilität hin untersucht: Stabilitäten bis 250°C sind erreichbar. Dabei wird keine kristalline Struktur beobachtet.
Metals are often used in environments that are conducive to corrosion, which leads to a reduction in their mechanical properties and durability. Coatings are applied to corrosion-prone metals such as aluminum alloys to inhibit the destructive surface process of corrosion in a passive or active way. Standard anticorrosive coatings function as a physical barrier between the material and the corrosive environment and provide passive protection only when intact. In contrast, active protection prevents or slows down corrosion even when the main barrier is damaged. The most effective industrially used active corrosion inhibition for aluminum alloys is provided by chromate conversion coatings. However, their toxicity and worldwide restriction provoke an urgent need for finding environmentally friendly corrosion preventing systems. A promising approach to replace the toxic chromate coatings is to embed particles containing nontoxic inhibitor in a passive coating matrix. This work presents the development and optimization of effective anticorrosive coatings for the industrially important aluminum alloy, AA2024-T3 using this approach. The protective coatings were prepared by dispersing mesoporous silica containers, loaded with the nontoxic corrosion inhibitor 2-mercaptobenzothiazole, in a passive sol-gel (SiOx/ZrOx) or organic water-based layer. Two types of porous silica containers with different sizes (d ≈ 80 and 700 nm, respectively) were investigated. The studied robust containers exhibit high surface area (≈ 1000 m² g-1), narrow pore size distribution (dpore ≈ 3 nm) and large pore volume (≈ 1 mL g-1) as determined by N2 sorption measurements. These properties favored the subsequent adsorption and storage of a relatively large amount of inhibitor as well as its release in response to pH changes induced by the corrosion process. The concentration, position and size of the embedded containers were varied to ascertain the optimum conditions for overall anticorrosion performance. Attaining high anticorrosion efficiency was found to require a compromise between delivering an optimal amount of corrosion inhibitor and preserving the coating barrier properties. This study broadens the knowledge about the main factors influencing the coating anticorrosion efficiency and assists the development of optimum active anticorrosive coatings doped with inhibitor loaded containers.
The underlying motivation for the work carried out for this thesis was the growing need for more sustainable technologies. The aim was to synthesize a “palette” of functional nanomaterials using the established technique of hydrothermal carbonization (HTC). The incredible diversity of HTC was demonstrated together with small but steady advances in how HTC can be manipulated to tailor material properties for specific applications. Two main strategies were used to modify the materials obtained by HTC of glucose, a model precursor representing biomass. The first approach was the introduction of heteroatoms, or “doping” of the carbon framework. Sulfur was for the first time introduced as a dopant in hydrothermal carbon. The synthesis of sulfur and sulfur/nitrogen doped microspheres was presented whereby it was shown that the binding state of sulfur could be influenced by varying the type of sulfur source. Pyrolysis may additionally be used to tune the heteroatom binding states which move to more stable motifs with increasing pyrolysis temperature. Importantly, the presence of aromatic binding states in the as synthesized hydrothermal carbon allows for higher heteroatom retention levels after pyrolysis and hence more efficient use of dopant sources. In this regard, HTC may be considered as an “intermediate” step in the formation of conductive heteroatom doped carbon. To assess the novel hydrothermal carbons in terms of their potential for electrochemical applications, materials with defined nano-architectures and high surface areas were synthesized via templated, as well as template-free routes. Sulfur and/or nitrogen doped carbon hollow spheres (CHS) were synthesized using a polystyrene hard templating approach and doped carbon aerogels (CA) were synthesized using either the albumin directed or borax-mediated hydrothermal carbonization of glucose. Electrochemical testing showed that S/N dual doped CHS and aerogels derived via the albumin approach exhibited superior catalytic performance compared to solely nitrogen or sulfur doped counterparts in the oxygen reduction reaction (ORR) relevant to fuel cells. Using the borax mediated aerogel formation, nitrogen content and surface area could be tuned and a carbon aerogel was engineered to maximize electrochemical performance. The obtained sample exhibited drastically improved current densities compared to a platinum catalyst (but lower onset potential), as well as excellent long term stability. In the second approach HTC was carried out at elevated temperatures (550 °C) and pressure (50 bar), corresponding to the superheated vapor regime (htHTC). It was demonstrated that the carbon materials obtained via htHTC are distinct from those obtained via ltHTC and subsequent pyrolysis at 550 °C. No difference in htHTC-derived material properties could be observed between pentoses and hexoses. The material obtained from a polysaccharide exhibited a slightly lower degree of carbonization but was otherwise similar to the monosaccharide derived samples. It was shown that in addition to thermally induced carbonization at 550 °C, the SHV environment exhibits a catalytic effect on the carbonization process. The resulting materials are chemically inert (i.e. they contain a negligible amount of reactive functional groups) and possess low surface area and electronic conductivity which distinguishes them from carbon obtained from pyrolysis. Compared to the materials presented in the previous chapters on chemical modifications of hydrothermal carbon, this makes them ill-suited candidates for electronic applications like lithium ion batteries or electrocatalysts. However, htHTC derived materials could be interesting for applications that require chemical inertness but do not require specific electronic properties. The final section of this thesis therefore revisited the latex hard templating approach to synthesize carbon hollow spheres using htHTC. However, by using htHTC it was possible to carry out template removal in situ because the second heating step at 550 °C was above the polystyrene latex decomposition temperature. Preliminary tests showed that the CHS could be dispersed in an aqueous polystyrene latex without monomer penetrating into the hollow sphere voids. This leaves the stagnant air inside the CHS intact which in turn is promising for their application in heat and sound insulating coatings. Overall the work carried out in this thesis represents a noteworthy development in demonstrating the great potential of sustainable carbon materials.
This work describes the synthesis and characterization of stimuli-responsive polymers made by reversible addition-fragmentation chain transfer (RAFT) polymerization and the investigation of their self-assembly into “smart” hydrogels. In particular the hydrogels were designed to swell at low temperature and could be reversibly switched to a collapsed hydrophobic state by rising the temperature. Starting from two constituents, a short permanently hydrophobic polystyrene (PS) block and a thermo-responsive poly(methoxy diethylene glycol acrylate) (PMDEGA) block, various gelation behaviors and switching temperatures were achieved. New RAFT agents bearing tert-butyl benzoate or benzoic acid groups, were developed for the synthesis of diblock, symmetrical triblock and 3-arm star block copolymers. Thus, specific end groups were attached to the polymers that facilitate efficient macromolecular characterization, e.g by routine 1H-NMR spectroscopy. Further, the carboxyl end-groups allowed functionalizing the various polymers by a fluorophore. Because reports on PMDEGA have been extremely rare, at first, the thermo-responsive behavior of the polymer was investigated and the influence of factors such as molar mass, nature of the end-groups, and architecture, was studied. The use of special RAFT agents enabled the design of polymer with specific hydrophobic and hydrophilic end-groups. Cloud points (CP) of the polymers proved to be sensitive to all molecular variables studied, namely molar mass, nature and number of the end-groups, up to relatively high molar masses. Thus, by changing molecular parameters, CPs of the PMDEGA could be easily adjusted within the physiological interesting range of 20 to 40°C. A second responsivity, namely to light, was added to the PMDEGA system via random copolymerization of MDEGA with a specifically designed photo-switchable azobenzene acrylate. The composition of the copolymers was varied in order to determine the optimal conditions for an isothermal cloud point variation triggered by light. Though reversible light-induced solubility changes were achieved, the differences between the cloud points before and after the irradiation were small. Remarkably, the response to light differed from common observations for azobenzene-based systems, as CPs decreased after UV-irradiation, i.e with increasing content of cis-azobenzene units. The viscosifying and gelling abilities of the various block copolymers made from PS and PMDEGA blocks were studied by rheology. Important differences were observed between diblock copolymers, containing one hydrophobic PS block only, the telechelic symmetrical triblock copolymers made of two associating PS termini, and the star block copolymers having three associating end blocks. Regardless of their hydrophilic block length, diblock copolymers PS11 PMDEGAn were freely flowing even at concentrations as high as 40 wt. %. In contrast, all studied symmetrical triblock copolymers PS8-PMDEGAn-PS8 formed gels at low temperatures and at concentrations as low as 3.5 wt. % at best. When heated, these gels underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurs. The gel-sol transition shifted to markedly higher transition temperatures with increasing length of the hydrophilic inner block. This effect increased also with the number of arms, and with the length of the hydrophobic end blocks. The mechanical properties of the gels were significantly altered at the cloud point and liquid-like dispersions were formed. These could be reversibly transformed into hydrogels by cooling. This thesis demonstrates that high molar mass PMDEGA is an easily accessible, presumably also biocompatible and at ambient temperature well water-soluble, non-ionic thermo-responsive polymer. PMDEGA can be easily molecularly engineered via the RAFT method, implementing defined end-groups, and producing different, also complex, architectures, such as amphiphilic triblock and star block copolymers, having an analogous structure to associative telechelics. With appropriate design, such amphiphilic copolymers give way to efficient, “smart” viscosifiers and gelators displaying tunable gelling and mechanical properties.
The present work is devoted to establishing of a new generation of self-healing anti-corrosion coatings for protection of metals. The concept of self-healing anticorrosion coatings is based on the combination of the passive part, represented by the matrix of conventional coating, and the active part, represented by micron-sized capsules loaded with corrosion inhibitor. Polymers were chosen as the class of compounds most suitable for the capsule preparation. The morphology of capsules made of crosslinked polymers, however, was found to be dependent on the nature of the encapsulated liquid. Therefore, a systematic analysis of the morphology of capsules consisting of a crosslinked polymer and a solvent was performed. Three classes of polymers such as polyurethane, polyurea and polyamide were chosen. Capsules made of these polymers and eight solvents of different polarity were synthesized via interfacial polymerization. It was shown that the morphology of the resulting capsules is specific for every polymer-solvent pair. Formation of capsules with three general types of morphology, such as core-shell, compact and multicompartment, was demonstrated by means of Scanning Electron Microscopy. Compact morphology was assumed to be a result of the specific polymer-solvent interactions and be analogues to the process of swelling. In order to verify the hypothesis, pure polyurethane, polyurea and polyamide were synthesized; their swelling behavior in the solvents used as the encapsulated material was investigated. It was shown that the swelling behavior of the polymers in most cases correlates with the capsules morphology. Different morphologies (compact, core-shell and multicompartment) were therefore attributed to the specific polymer-solvent interactions and discussed in terms of “good” and “poor” solvent. Capsules with core-shell morphology are formed when the encapsulated liquid is a “poor” solvent for the chosen polymer while compact morphologies are formed when the solvent is “good”. Multicompartment morphology is explained by the formation of infinite networks or gelation of crosslinked polymers. If gelation occurs after the phase separation in the system is achieved, core-shell morphology is present. If gelation of the polymer occurs far before crosslinking is accomplished, further condensation of the polymer due to the crosslinking may lead to the formation of porous or multicompartment morphologies. It was concluded that in general, the morphology of capsules consisting of certain polymer-solvent pairs can be predicted on the basis of polymer-solvent behavior. In some cases, the swelling behavior and morphology may not match. The reasons for that are discussed in detail in the thesis. The discussed approach is only capable of predicting capsule morphology for certain polymer-solvent pairs. In practice, the design of the capsules assumes the trial of a great number of polymer-solvent combinations; more complex systems consisting of three, four or even more components are often used. Evaluation of the swelling behavior of each component pair of such systems becomes unreasonable. Therefore, exploitation of the solubility parameter approach was found to be more useful. The latter allows consideration of the properties of each single component instead of the pair of components. In such a manner, the Hansen Solubility Parameter (HSP) approach was used for further analysis. Solubility spheres were constructed for polyurethane, polyurea and polyamide. For this a three-dimensional graph is plotted with dispersion, polar and hydrogen bonding components of solubility parameter, obtained from literature, as the orthogonal axes. The HSP of the solvents are used as the coordinates for the points on the HSP graph. Then a sphere with a certain radius is located on a graph, and the “good” solvents would be located inside the sphere, while the “poor” ones are located outside. Both the location of the sphere center and the sphere radius should be fitted according to the information on polymer swelling behavior in a number of solvents. According to the existing correlation between the capsule morphology and swelling behavior of polymers, the solvents located inside the solubility sphere of a polymer give capsules with compact morphologies. The solvents located outside the solubility sphere of the solvent give either core-shell or multicompartment capsules in combination with the chosen polymer. Once the solubility sphere of a polymer is found, the solubility/swelling behavior is approximated to all possible substances. HSP theory allows therefore prediction of polymer solubility/swelling behavior and consequently the capsule morphology for any given substance with known HSP parameters on the basis of limited data. The latter makes the theory so attractive for application in chemistry and technology, since the choice of the system components is usually performed on the basis of a large number of different parameters that should mutually match. Even slight change of the technology sometimes leads to the necessity to find the analogue of this or that solvent in a sense of solvency but carrying different chemistry. Usage of the HSP approach in this case is indispensable. In the second part of the work examples of the HSP application for the fabrication of capsules with on-demand-morphology are presented. Capsules with compact or core-shell morphology containing corrosion inhibitors were synthesized. Thus, alkoxysilanes possessing long hydrophobic tail, combining passivating and water-repelling properties, were encapsulated in polyurethane shell. The mechanism of action of the active material required core-shell morphology of the capsules. The new hybrid corrosion inhibitor, cerium diethylhexyl phosphate, was encapsulated in polyamide shells in order to facilitate the dispersion of the substance and improve its adhesion to the coating matrix. The encapsulation of commercially available antifouling agents in polyurethane shells was carried out in order to control its release behavior and colloidal stability. Capsules with compact morphology made of polyurea containing the liquid corrosion inhibitor 2-methyl benzothiazole were synthesized in order to improve the colloidal stability of the substance. Capsules with compact morphology allow slower release of the liquid encapsulated material compared to the core-shell ones. If the “in-situ” encapsulation is not possible due to the reaction of the oil-soluble monomer with the encapsulated material, a solution was proposed: loading of the capsules should be performed after monomer deactivation due to the accomplishment of the polymerization reaction. Capsules of desired morphologies should be preformed followed by the loading step. In this way, compact polyurea capsules containing the highly effective but chemically active corrosion inhibitors 8-hydroxyquinoline and benzotriazole were fabricated. All the resulting capsules were successfully introduced into model coatings. The efficiency of the resulting “smart” self-healing anticorrosion coatings on steel and aluminium alloy of the AA-2024 series was evaluated using characterization techniques such as Scanning Vibrating Electron Spectroscopy, Electrochemical Impedance Spectroscopy and salt-spray chamber tests.
Porous materials (e.g. zeolites, activated carbon, etc.) have found various applications in industry, such as the use as sorbents, catalyst supports and membranes for separation processes. Recently, much attention has been focused on synthesizing porous polymer materials. A vast amount of tailor-made polymeric systems with tunable properties has been investigated. Very often, however, the starting substances for these polymers are of petrochemical origin, and the processes are all in all not sustainable. Moreover, the new polymers have challenged existing characterizing methodologies. These have to be further developed to address the upcoming demands of the novel materials. Some standard techniques for the analysis of porous substances like nitrogen sorption at 77 K do not seem to be sufficient to answer all arising questions about the microstructure of such materials. In this thesis, microporous polymers from an abundant natural resource, betulin, will be presented. Betulin is a large-scale byproduct of the wood industry, and its content in birch bark can reach 30 wt.%. Based on its rigid structure, polymer networks with intrinsic microporosity could be synthesized and characterized. Apart from standard nitrogen and carbon dioxide sorption at 77 K and 273 K, respectively, gas sorption has been examined not only with various gases (hydrogen and argon) but also at various temperatures. Additional techniques such as X-ray scattering and xenon NMR have been utilized to enable insight into the microporous structure of the material. Starting from insoluble polymer networks with promising gas selectivities, soluble polyesters have been synthesized and processed to a cast film. Such materials are feasible for membrane applications in gas separation. Betulin as a starting compound for polyester synthesis has aided to prepare, and for the first time to thoroughly analyse a microporous polyester with respect to its pores and microstructure. It was established that nitrogen adsorption at 87 K can be a better method to solve the microstructure of the material. In addition to that, other betulin-based polymers such as polyurethanes and polyethylene glycol bioconjugates are presented. Altogether, it has been shown that as an abundant natural resource betulin is a suitable and cheap starting compound for some polymers with various potential applications.
Die Photophysik und Photochemie von Flavinen sind aufgrund ihrer biologischen Funktion, inbesondere von Flavoproteinen, von großen Interesse. Flavoproteine spielen eine große Rolle in einer Vielzahl von biologischen Prozessen, z.B. Biolumineszenz, Entfernung von Radikalen, die bei oxidativem Stress entstehen, Photosynthese und DNA-Reparatur. Die spektroskopischen Eigenschaften des Flavin-Cofaktors machen diesen zu einem natürlichen Reporter für Veränderungen innerhalb des aktiven Zentrums. Deshalb sind die Flavoproteine eine der am meisten untersuchten Enzymfamilien. Eine biologische Aktivität des Flavins führt über einen elektronisch angeregten Zustand, wo dann, abhängig von der Aminosäureumgebung, ein bestimmter Mechanismus zu einem biologischen Prozess führt (Photozyklus). Ein wichtiges Analysetool zum Verständnis des anfänglichen Photoanregungsschritts der Flavine sind die elektronische und die Schwingungsspektroskopie. In dieser Arbeit wurden die Prozesse von Riboflavin (RF) während und nach optischer Anregung mit theoretischen Mitteln beleuchtet. Dazu wurden quantenchemische Berechnungen für Schwingungsspektren (vibratorische) von Riboflavin, auch Laktoflavin oder Vitamin B2 genannt, dem Grundmolekül der Chromophore biologischer Blaulichtrezeptoren, in dessen elektronischem Grundzustand und dessen niedrigsten angeregten Zustand durchgeführt. Weiterhin wurden vibronische (vibratorische+elektronische) Absorptionsspektren und ein vibronisches Emissionsspektrum berechnet. Die so berechneten Schwingungs- und elektronischen Spektren sind in guter qualitativer wie quantitativer Übereinstimmung mit gemessenen Werten, und helfen so, die experimentellen Signale der Photoanregung von Flavinen zuzuweisen. Unmittelbar nach der Photoanregung wurde ein Verlust des Doppelbindungscharakters im polaren Bereich des Ringssystems beobachtet, was zu der vibronischen Feinstruktur im elektronischen Absorptions- und Emissionsspektrum führte. Hier zeigte sich zudem, dass neben den vibronischen Effekten auch die Lösungsmitteleffekte wichtig für das quantitative Verständnis der Photophysik der Flavine in Lösung sind. Um Details des optischen Anregungsprozesses als initialen, elementaren Schritt zur Signalweiterleitung zu entschlüsseln, wurden ultraschnelle (femtosekundenaufgelöste) Experimente durchgeführt, die die Photoaktivierung des Flavins untersuchen. Diese Arbeit soll zu einem weiteren Verständnis und der Interpretation dieser Experimente durch das Studium der Post-Anregungsschwingungsdynamik von Riboflavin und mikrosolvatisiertem Riboflavin beitragen. Dazu wurde eine 200 fs lange Molekulardynamik in angeregten Zuständen betrachtet. Durch die Analyse charakteristischer Atombewegungen und durch die Berechnungen zeitaufgelöster Emissionsspektren fand man heraus, dass nach der optischen Anregung Schwingungen im Ringssystem des Riboflavins einsetzen. Mit Hilfe dieser Berechnungen kann die Umverteilung der Energie im angeregten Zustand beobachtet werden. Neben den theoretischen Untersuchungen zu Riboflavin in der Gasphase und auch in Lösung wurde ein Modell für eine BLUF (Blue-Light Photoreceptor Using Flavin) Domäne, ein Flavin benutzender Photorezeptor, erstellt. Hierbei zeigt sich, dass man die in dieser Arbeit angewendeten Analysemethoden auch auf biologisch relevante Systeme anwenden kann.
Der Förster-Resonanzenergietransfer (FRET) liefert einen wichtigen Beitrag bei der Untersuchung kleinskaliger biologischer Systeme und Prozesse. Möglich wird dies durch die r-6-Abhängigkeit des FRET, die es erlaubt Abstände und strukturelle Änderungen weit unterhalb der Beugungsgrenze des Lichts mit hoher Sensitivität und geringem Aufwand zu bestimmen. Die besonderen photophysikalischen Eigenschaften von Terbiumkomplexen (LTC) und Quantenpunkten (QD) machen sie zu geeigneten Kandidaten für hochsensitive und störungsarme Multiplex-Abstandsmessungen in biologischen Systemen und Prozessen. Die Abstandsbestimmungen setzen jedoch eine genaueste Kenntnis des Mechanismus des Energietransfers von LTC auf QD ebenso voraus, wie das Wissen um Größe und Gestalt letzterer. Quantenpunkte haben im Vergleich zu biologischen Strukturen ähnliche Dimensionen und können nicht als punktförmig betrachtet werden, wie es bei einfacheren Farbstoffen möglich ist. Durch ihre Form kommt es zu einer Abstandsverteilung innerhalb des Donor-Akzeptorsystems. Dies beeinflusst den Energietransfer und damit die experimentellen Ergebnisse. In dieser Arbeit wurde der Energietransfer von LTC auf QD untersucht, um zu einer Aussage hinsichtlich des Mechanismus der Energieübertragung und der dabei zu berücksichtigenden photophysikalischen und strukturellen Parameter von LTC und QD zu gelangen. Mit der Annahme einer Abstandsverteilung sollten die Größen der Quantenpunkte bestimmt und der Einfluss von Form und Gestalt auf den Energietransfer betrachtet werden. Die notwendigen theoretischen und praktischen Grundlagen wurden eingangs dargestellt. Daran schlossen sich Messungen zur photophysikalischen Charakterisierung der Donoren und Akzeptoren an, die Grundlage der Berechnung der FRET-Parameter waren. Die Förster-Radien zeigten die für den FRET von LTC auf QD typischen extrem hohen Werte von bis zu 11 nm. Zeitaufgelöste Messungen der FRET-induzierten Lumineszenz der Donoren und Akzeptoren in den beiden biomolekularen Modellsystemen Zink-Histidin und Biotin-Streptavidin beschlossen den praktischen Teil. Als Donor wurde Lumi4Tb gebunden an ein Peptid bzw. Streptavidin genutzt, Akzeptoren waren fünf verschiedene, kommerziell erhältliche Quantenpunkte mit Carboxyl- bzw. Biotinfunktionalisierung. Bei allen Donor-Akzeptor-Paarungen konnte FRET beobachtet und ausgewertet werden. Es konnte gezeigt werden, dass die gesamte Emission des Terbiums zum Energietransfer beiträgt und der Orientierungsfaktor ² den Wert 2/3 annimmt. Die Charakterisierung der Bindungsverhältnisse innerhalb der FRET-Paare von LTC und QD über Verteilungsfunktionen bietet über die Form der Verteilungskurve die Möglichkeit Aussagen über die Gestalt der FRET-Partner zu treffen. So war es möglich, die mittlere Form der Quantenpunkte als Sphäre zu bestimmen. Dies entsprach, insbesondere bei den in z-Richtung des Kristallgitters elongierten Quantenpunkten, nicht den Erwartungen. Dieser Befund ermöglicht daher bei zukünftigen Messungen eine Verbesserung der Genauigkeit bei Abstandsbestimmungen mit Quantenpunkten. Neben der Ermittlung der die FRET-Verteilung bestimmenden Gestalt der Quantenpunkte konnte im Rahmen dieser Arbeit anhand vergleichender Messungen die Dicke der Polymerhülle der QD bestimmt und so gezeigt werden, dass FRET-Paare aus lumineszenten Terbiumkomplexen und Quantenpunkten in der Lage sind, Abstände im Nano- bis Sub-Nanometerbereich aufzulösen.
The aim of this thesis is the quantum dynamical study of two examples of scanning tunneling microscope (STM)-controllable, Si(100)(2x1) surface-mounted switches of atomic and molecular scale. The first example considers the switching of single H-atoms between two dangling-bond chemisorption sites on a Si-dimer of the Si(100) surface (Grey et al., 1996). The second system examines the conformational switching of single 1,5-cyclooctadiene molecules chemisorbed on the Si(100) surface (Nacci et al., 2008). The temporal dynamics are provided by the propagation of the density matrix in time via an according set of equations of motion (EQM). The latter are based on the open-system density matrix theory in Lindblad form. First order perturbation theory is used to evaluate those transition rates between vibrational levels of the system part. In order to account for interactions with the surface phonons, two different dissipative models are used, namely the bilinear, harmonic and the Ohmic bath model. IET-induced vibrational transitions in the system are due to the dipole- and the resonance-mechanism. A single surface approach is used to study the influence of dipole scattering and resonance scattering in the below-threshold regime. Further, a second electronic surface was included to study the resonance-induced switching in the above-threshold regime. Static properties of the adsorbate, e.g., potentials and dipole function and potentials, are obtained from quantum chemistry and used within the established quantum dynamical models.
The present thesis is to be brought into line with the current need for alternative and sustainable approaches toward energy management and materials design. In this context, carbon in particular has become the material of choice in many fields such as energy conversion and storage. Herein, three main topics are covered: 1)An alternative synthesis strategy toward highly porous functional carbons with tunable porosity using ordinary salts as porogen (denoted as “salt templating”) 2)The one-pot synthesis of porous metal nitride containing functional carbon composites 3)The combination of both approaches, enabling the generation of highly porous composites with finely tunable properties All approaches have in common that they are based on the utilization of ionic liquids, salts which are liquid below 100 °C, as precursors. Just recently, ionic liquids were shown to be versatile precursors for the generation of heteroatom-doped carbons since the liquid state and a negligible vapor pressure are highly advantageous properties. However, in most cases the products do not possess any porosity which is essential for many applications. In the first part, “salt templating”, the utilization of salts as diverse and sustainable porogens, is introduced. Exemplarily shown for ionic liquid derived nitrogen- and nitrogen-boron-co-doped carbons, the control of the porosity and morphology on the nanometer scale by salt templating is presented. The studies within this thesis were conducted with the ionic liquids 1-Butyl-3-methyl-pyridinium dicyanamide (Bmp-dca), 1-Ethyl-3-methyl-imidazolium dicyanamide (Emim-dca) and 1 Ethyl 3-methyl-imidazolium tetracyanoborate (Emim-tcb). The materials are generated through thermal treatment of precursor mixtures containing one of the ionic liquids and a porogen salt. By simple removal of the non-carbonizable template salt with water, functional graphitic carbons with pore sizes ranging from micro- to mesoporous and surface areas up to 2000 m2g-1 are obtained. The carbon morphologies, which presumably originate from different onsets of demixing, mainly depend on the nature of the porogen salt whereas the nature of the ionic liquid plays a minor role. Thus, a structural effect of the porogen salt rather than activation can be assumed. This offers an alternative to conventional activation and templating methods, enabling to avoid multiple-step and energy-consuming synthesis pathways as well as employment of hazardous chemicals for the template removal. The composition of the carbons can be altered via the heat-treatment procedure, thus at lower synthesis temperatures rather polymeric carbonaceous materials with a high degree of functional groups and high surface areas are accessible. First results suggest the suitability of the materials for CO2 utilization. In order to further illustrate the potential of ionic liquids as carbon precursors and to expand the class of carbons which can be obtained, the ionic liquid 1-Ethyl-3-methyl-imidazolium thiocyanate (Emim-scn) is introduced for the generation of nitrogen-sulfur-co-doped carbons in combination with the already studied ionic liquids Bmp-dca and Emim-dca. Here, the salt templating approach should also be applicable eventually further illustrating the potential of salt templating, too. In the second part, a one-pot and template-free synthesis approach toward inherently porous metal nitride nanoparticle containing nitrogen-doped carbon composites is presented. Since ionic liquids also offer outstanding solubility properties, the materials can be generated through the carbonization of homogeneous solutions of an ionic liquid acting as nitrogen as well as carbon source and the respective metal precursor. The metal content and surface area are easily tunable via the initial metal precursor amount. Furthermore, it is also possible to synthesize composites with ternary nitride nanoparticles whose composition is adjustable by the metal ratio in the precursor solution. Finally, both approaches are combined into salt templating of the one-pot composites. This opens the way to the one-step synthesis of composites with tunable composition, particle size as well as precisely controllable porosity and morphology. Thereby, common synthesis strategies where the product composition is often negatively affected by the template removal procedure can be avoided. The composites are further shown to be suitable as electrodes for supercapacitors. Here, different properties such as porosity, metal content and particle size are investigated and discussed with respect to their influence on the energy storage performance. Because a variety of ionic liquids, metal precursors and salts can be combined and a simple closed-loop process including salt recycling is imaginable, the approaches present a promising platform toward sustainable materials design.
The need to reduce humankind reliance on fossil fuels by exploiting sustainably the planet renewable resources is a major driving force determining the focus of modern material research. For this reason great interest is nowadays focused on finding alternatives to fossil fuels derived products/materials. For the short term the most promising substitute is undoubtedly biomass, since it is the only renewable and sustainable alternative to fossil fuels as carbon source. As a consequence efforts, aimed at finding new synthetic approaches to convert biomass and its derivatives into carbon-based materials, are constantly increasing. In this regard, hydrothermal carbonisation (HTC) has shown to be an effective means of conversion of biomass-derived precursors into functional carbon materials. However the attempts to convert raw biomass, in particular lignocellulosic one, directly into such products have certainly been rarer. Unlocking the direct use of these raw materials as carbon precursors would definitely be beneficial in terms of HTC sustainability. For this reason, in this thesis the HTC of carbohydrate and protein-rich biomass was systematically investigated, in order to obtain more insights on the potentials of this thermochemical processing technique in relation to the production of functional carbon materials from crude biomass. First a detailed investigation on the HTC conversion mechanism of lignocellulosic biomass and its single components (i.e. cellulose, lignin) was developed based on a comparison with glucose HTC, which was adopted as a reference model. In the glucose case it was demonstrated that varying the HTC temperature allowed tuning the chemical structure of the synthesised carbon materials from a highly cross-linked furan-based structure (T = 180oC) to a carbon framework composed of polyaromatic arene-like domains. When cellulose or lignocellulosic biomass was used as carbon precursor, the furan rich structure could not be isolated at any of the investigated processing conditions. These evidences were indicative of a different HTC conversion mechanism for cellulose, involving reactions that are commonly observed during pyrolytic processes. The evolution of glucose-derived HTC carbon chemical structure upon pyrolysis was also investigated. These studies revealed that upon heat treatment (Investigated temperatures 350 – 900 oC) the furan-based structure was progressively converted into highly curved aromatic pre-graphenic domains. This thermal degradation process was observed to produce an increasingly more hydrophobic surface and considerable microporosity within the HTC carbon structure. In order to introduce porosity in the HTC carbons derived from lignocellulosic biomass, KOH chemical activation was investigated as an HTC post-synthesis functionalisation step. These studies demonstrated that HTC carbons are excellent precursors for the production of highly microporous activated carbons (ACs) and that the porosity development upon KOH chemical activation is dependent on the chemical structure of the HTC carbon, tuned by employing different HTC temperatures. Preliminary testing of the ACs for CO2 capture or high pressure CH4 storage yielded very promising results, since the measured uptakes of both adsorbates (i.e. CO2 and CH4) were comparable to top-performing and commercially available adsorbents, usually employed for these end-applications. The combined use of HTC and KOH chemical activation was also employed to produce highly microporous N-doped ACs from microalgae. The hydrothermal treatment of the microalgae substrate was observed to cause the depletion of the protein and carbohydrate fractions and the near complete loss (i.e. 90%) of the microalgae N-content, as liquid hydrolysis/degradation products. The obtained carbonaceous product showed a predominantly aliphatic character indicating the presence of alkyl chains presumably derived from the lipid fractions. Addition of glucose to the initial reaction mixture was found out to be extremely beneficial, because it allowed the fixation of a higher N amount, in the algae derived HTC carbons (i.e. 60%), and the attainment of higher product yields (50%). Both positive effects were attributed to Maillard type cascade reactions taking place between the monosaccharides and the microalgae derived liquid hydrolysis/degradation products, which were in this way recovered from the liquid phase. KOH chemical activation of the microalgae/glucose mixture derived HTC carbons produced highly microporous N-doped carbons. Although the activation process led to a major reduction of the N-content, the retained N-amount in the ACs was still considerable. These features render these materials ideal candidates for supercapacitors electrodes, since they provide extremely high surface areas, for the formation of electric double-layer, coupled to abundant heteroatom doping (i.e. N and O) necessary to obtain a pseudocapacitance contribution.
Ein viel diskutiertes Thema unserer Zeit ist die Zukunft der Energiegewinnung und Speicherung. Dabei nimmt die Nanowissenschaft eine bedeutende Rolle ein; sie führt zu einer Effizienzsteigerung bei der Speicherung und Gewinnung durch bereits bekannte Materialien und durch neue Materialien. In diesem Zusammenhang ist die Chemie Wegbereiter für Nanomaterialien. Allerdings führen bisher die meisten bekannten Synthesen von Nanopartikeln zu undefinierten Partikeln. Eine einfache, kostengünstige und sichere Synthese würde die Möglichkeit einer breiten Anwendung und Skalierbarkeit bieten. In dieser Arbeit soll daher die Darstellung der einfachen Synthese von Mangannitrid-, Aluminiumnitrid-, Lithiummangansilicat-, Zirkonium-oxinitrid- und Mangancarbonatnanopartikel betrachtet werden. Dabei werden die sogenannte Harnstoff-Glas-Route als eine Festphasensynthese und die Solvothermalsynthese als typische Flüssigphasensynthese eingesetzt. Beide Synthesewege führen zu definierten Partikelgrößen und interessanten Morphologien und ermöglichen eine Einflussnahme auf die Produkte. Im Falle der Synthese der Mangannitridnanopartikel mithilfe der Harnstoff-Glas-Route führt diese zu Nanopartikeln mit Kern-Hülle-Struktur, deren Einsatz als Konversionsmaterial erstmalig vorgestellt wird. Mit dem Ziel einer leichteren Anwendung von Nanopartikeln wird eine einfache Beschichtung von Oberflächen mit Nanopartikeln mithilfe der Rotationsbeschichtung beschrieben. Es entstand ein Gemisch aus MnN0,43/MnO-Nanopartikeln, eingebettet in einem Kohlenstofffilm, dessen Untersuchung als Konversionsmaterial hohe spezifische Kapazitäten (811 mAh/g) zeigt, die die von dem konventionellen Anodenmaterial Graphit (372 mAh/g) übersteigt. Neben der Synthese des Anodenmaterials wurde ebenfalls die des Kathodenmaterials Li2MnSiO4-Nanopartikeln mithilfe der Harnstoff-Glas-Route vorgestellt. Mithilfe der Synthese von Zirkoniumoxinitridnanopartikeln Zr2ON2 kann eine einfache Einflussnahme auf das gewünschte Produkt durch die Variation derReaktionsbedingungen, wie Harnstoffmenge oder Reaktionstemperatur, bei der Harnstoff-Glas-Route demonstriert werden. Der Zusatz von kleinsten Mengen an Ammoniumchlorid vermeidet, dass sich Kohlenstoff im Endprodukt bildet und führt so zu gelben Zr2ON2-Nanopartikeln mit einer Größe d = 8 nm, die Halbleitereigen-schaften besitzen. Die Synthese von Aluminiumnitridnanopartikeln führt zu kristallinen Nanopartikeln, die in eine amorphe Matrix eingebettet sind. Die Solvothermalsynthese von Mangancarbonatnanopartikel lässt neue Morphologien in Form von Nanostäbchen entstehen, die zu schuppenartigen sphärischen Überstrukturen agglomeriert sind.
Diese Arbeit befasst sich mit der Synthese und Charakterisierung von organolöslichen Thiophen und Benzodithiophen basierten Materialien und ihrer Anwendung als aktive lochleitende Halbleiterschichten in Feldeffekttransistoren. Im ersten Teil der Arbeit wird durch eine gezielte Modifikation des Thiophengrundgerüstes eine neue Comonomer-Einheit für die Synthese von Thiophen basierten Copolymeren erfolgreich dargestellt. Die hydrophoben Hexylgruppen in der 3-Position des Thiophens werden teilweise durch hydrophile 3,6-Dioxaheptylgruppen ersetzt. Über die Grignard-Metathese nach McCullough werden statistische Copolymere mit unterschiedlichen molaren Anteilen vom hydrophoben Hexyl- und hydrophilem 3,6-Dioxaheptylgruppen 1:1 (P-1), 1:2 (P-2) und 2:1 (P-3) erfolgreich hergestellt. Auch die Synthese eines definierten Blockcopolymers BP-1 durch sequentielle Addition der Comonomere wird realisiert. Optische und elektrochemische Eigenschaften der neuartigen Copolymere sind vergleichbar mit P3HT. Mit allen Copolymeren wird ein charakteristisches Transistorverhalten in einem Top-Gate/Bottom-Kontakt-Aufbau erhalten. Dabei werden mit P-1 als die aktive Halbleiterschicht im Bauteil, PMMA als Dielektrikum und Silber als Gate-Elektrode Mobilitäten von bis zu 10-2 cm2/Vs erzielt. Als Folge der optimierten Grenzfläche zwischen Dielektrikum und Halbleiter wird eine Verbesserung der Luftstabilität der Transistoren über mehrere Monate festgestellt. Im zweiten Teil der Arbeit werden Benzodithiophen basierte organische Materialien hergestellt. Für die Synthese der neuartigen Benzodithiophen-Derivate wird die Schlüsselverbindung TIPS-BDT in guter Ausbeute dargestellt. Die Difunktionalisierung von TIPS-BDT in den 2,6-Positionen über eine elektrophile Substitution liefert die gewünschten Dibrom- und Distannylmonomere. Zunächst werden über die Stille-Reaktion alternierende Copolymere mit alkylierten Fluoren- und Chinoxalin-Einheiten realisiert. Alle Copolymere zeichnen sich durch eine gute Löslichkeit in gängigen organischen Lösungsmitteln, hohe thermische Stabilität und durch gute Filmbildungseigenschaften aus. Des Weiteren sind alle Copolymere mit HOMO Lagen höher als -6.3 eV, verglichen mit den Thiophen basierten Copolymeren (P-1 bis P-3), sehr oxidationsstabil. Diese Copolymere zeigen amorphes Verhalten in den Halbleiterschichten in OFETs auf und es werden Mobilitäten bis zu 10-4 cm2/Vs erreicht. Eine Abhängigkeit der Bauteil-Leistung von dem Zinngehalt-Rest im Polymer wird nachgewiesen. Ein Zinngehalt von über 0.6 % kann enormen Einfluss auf die Mobilität ausüben, da die funktionellen SnMe3-Gruppen als Fallenzustände wirken können. Alternativ wird das alternierende TIPS-BDT/Fluoren-Copolymer P-5-Stille nach der Suzuki-Methode polymerisiert. Mit P-5-Suzuki als die aktive organische Halbleiterschicht im OFET wird die höchste Mobilität von 10-2 cm2/Vs erzielt. Diese Mobilität ist somit um zwei Größenordnungen höher als bei P-5-Stille, da die Fallenzustände in diesem Fall minimiert werden und folglich der Ladungstransport verbessert wird. Sowohl das Homopolymer P-12 als auch das Copolymer mit dem aromatischen Akzeptor Benzothiadiazol P-9 führen zu schwerlöslichen Polymeren. Aus diesem Grund werden einerseits Terpolymere aus TIPS-BDT/Fluoren/BTD-Einheiten P-10 und P-11 aufgebaut und andererseits wird versucht die TIPS-BDT-Einheit in die Seitenkette des Styrols einzubringen. Mit der Einführung von BTD in die Hauptpolymerkette werden insbesondere die Absorptions- und die elektrochemischen Eigenschaften beeinflusst. Im Vergleich zu dem TIPS-BDT/Fluoren-Copolymer reicht die Absorption bis in den sichtbaren Bereich und die LUMO Lage wird zu niederen Werten verschoben. Eine Verbesserung der Leistung in den Bauteilen wird jedoch nicht festgestellt. Die erfolgreiche erstmalige Synthese von TIPS-BDT als Seitenkettenpolymer an Styrol P-13 führt zu einem löslichen und amorphen Polymer mit vergleichbaren Mobilitäten von Styrol basierten Polymeren (µ = 10-5 cm2/Vs) im OFET. Ein weiteres Ziel dieser Arbeit ist die Synthese von niedermolekularen organolöslichen Benzodithiophen-Derivaten. Über Suzuki- und Stille-Reaktionen ist es erstmals möglich, verschiedenartige Aromaten über eine σ-Bindung an TIPS-BDT in den 2,6-Positionen zu knüpfen. Die UV/VIS-Untersuchungen zeigen, dass die Absorption durch die Verlängerung der π-Konjugationslänge zu höheren Wellenlängen verschoben wird. Darüber hinaus ist es möglich, thermisch vernetzbare Gruppen wie Allyloxy in das Molekülgerüst einzubauen. Das Einführen von F-Atomen in das Molekülgerüst resultiert in einer verstärkten Packungsordnung im Fluorbenzen funktionalisiertem TIPS-BDT (SM-4) im Festkörper mit sehr guten elektronischen Eigenschaften im OFET, wobei Mobilitäten bis zu 0.09 cm2/Vs erreicht werden.
Die Entwicklung neuer Verfahren für die Rückführung von Palladium aus Altmaterialien, wie gebrauchten Autoabgaskatalysatoren, in den Stoffstromkreislauf ist sowohl aus ökologischer als auch ökonomischer Sicht erstrebenswert. In dieser Arbeit wurden neue Flüssig-Flüssig- und Fest-Flüssig-Extraktionsmittel entwickelt, mit denen Palladium(II) aus einer oxidierenden, salzsauren Laugungslösung, die neben Palladium auch Platin und Rhodium sowie zahlreiche unedle Metalle enthält, zurückgewonnen werden kann. Die neuen Extraktionsmittel ungesättigte monomere 1,2-Dithioether und oligomere Ligandenmischungen mit vicinalen Dithioether-Einheiten – sind im Gegensatz zu vielen in der Literatur aufgeführten Extraktionsmitteln hochselektiv. Aufgrund ihrer geometrischen und elektronischen Präorganisation bilden sie mit Palladium(II) stabile quadratisch-planare Chelatkomplexe. Für die Entwicklung des Flüssig-Flüssig-Extraktionsmittels wurde eine Reihe von ungesättigten 1,2-Dithioetherliganden dargestellt, welche auf einer starren 1,2-Dithioethen-Einheit, die in ein variierendes elektronenziehendes Grundgerüst eingebettet ist, basieren und polare Seitenketten besitzen. Neben der Bestimmung der Kristallstrukturen der Liganden und ihrer Palladiumdichlorid-Komplexe wurden die elektro- und photochemischen Eigenschaften, die Komplexstabilität und das Verhalten in Lösung untersucht. In Flüssig-Flüssig-Extraktionsuntersuchungen konnte gezeigt werden, dass einige der neuen Liganden industriell genutzten Extraktionsmitteln durch eine schnellere Einstellung des Extraktionsgleichgewichts überlegen sind. Anhand von Kriterien, die für eine industrielle Nutzbarkeit entscheidend sind, wie: guter Oxidationsbeständigkeit, einer hohen Extraktionsausbeute (auch bei hohen Salzsäurekonzentrationen der Speiselösung), schneller Extraktionskinetik und einer hohen Selektivität für Palladium(II) wurde aus der Reihe der sechs Liganden ein geeignetes Flüssig-Flüssig-Extraktionsmittel ausgewählt: 1,2-Bis(2-methoxyethylthio)benzen. Mit diesem wurde ein praxisnahes Flüssig-Flüssig-Extraktionssystem entwickelt. Nach der schrittweisen Adaption der wässrigen Phase von einer Modelllösung hin zu der oxidierenden, salzsauren Laugungslösung erfolgte die Auswahl eines geeigneten großtechnisch, einsetzbaren Lösemittels (1,2-Dichlorbenzen) und eines effizienten Reextraktionsmittels (0,5 M Thioharnstoff in 0,1 M HCl). Die hohe Palladium(II)-Selektivität dieses Flüssig-Flüssig-Extraktionssystems konnte verifiziert und seine Wiederverwendbarkeit und Praxistauglichkeit unter Beweis gestellt werden. Weiterhin wurde gezeigt, dass sich beim Kontakt mit oxidierenden Medien aus dem Dithioether 1,2-Bis(2-methoxyethylthio)benzen geringe Mengen des Thioethersulfoxids 1-(2-Methoxyethylsulfinyl)-2-(2-methoxyethylthio)benzen bilden. Dieses wird im sauren Milieu protoniert und beschleunigt die Extraktion wie ein Phasentransferkatalysator, ohne jedoch die Palladium(II)-Selektivität herabzusetzen. Die Kristallstruktur des Palladiumdichlorid-Komplexes des Tioethersulfoxids zeigt, dass der unprotonierte Ligand Palladium(II), analog zum Dithioether, über die chelatisierenden Schwefelatome koordiniert. Verschiedene Mischungen von Oligo(dithioether)-Liganden und der monomere Ligand 1,2-Bis(2-methoxyethylthio)benzen dienten als Extraktionsmittel für Fest-Flüssig-Extraktionsversuche mit SIRs (solvent impregnated resins) und wurden zu diesem Zweck auf hydrophilem Kieselgel und organophilem Amberlite® XAD 2 adsorbiert. Die Oligo(dithioether)-Liganden basieren auf 1,2-Dithiobenzen oder 1,2-Dithiomaleonitril-Einheiten, welche über Tris(oxyethylen)ethylen- oder Trimethylen-Brücken miteinander verknüpft sind. Mit Hilfe von Batch-Versuchen konnte gezeigt werden, dass sich strukturelle Unterschiede - wie die Art der chelatisierenden Einheit, die Art der verbrückenden Ketten und das Trägermaterial - auf die Extraktionsausbeuten, die Extraktionskinetik und die Beladungskapazität auswirken. Die kieselgelhaltigen SIRs stellen das Extraktionsgleichgewicht viel schneller ein als die Amberlite® XAD 2-haltigen. Jedoch bleiben die Extraktionsmittel auf Amberlite® XAD 2, im Gegensatz zu Kieselgel, dauerhaft haften. Im salzsauren Milieu sind die 1,2-Dithiobenzen-derivate besser als Extraktionsmittel geeignet als die 1,2-Dithiomaleonitrilderivate. In Säulenversuchen mit der oxidierenden, salzsauren Laugungslösung und wiederverwendbaren, mit 1,2-Dithiobenzenderivaten imprägnierten, Amberlite® XAD 2-haltigen SIRs zeigte sich, dass für die Realisierung hoher Beladungskapazitäten sehr geringe Pumpraten benötigt werden. Trotzdem konnte die gute Palladium(II)-Selektivität dieser Festphasenmaterialien demonstriert werden. Allerdings wurden in den Eluaten im Gegensatz zu den Eluaten, die aus Flüssig-Flüssig-Extraktion resultierten neben dem Palladium auch geringe Mengen an Platin, Aluminium, Eisen und Blei gefunden.
In dieser Arbeit wurden sphärische Gold Nanopartikel (NP) mit einem Durchmesser größer ~ 2 nm, Gold Quantenpunkte (QDs) mit einem Durchmesser kleiner ~ 2 nm sowie Gold Nanostäbchen (NRs) unterschiedlicher Länge hergestellt und optisch charakterisiert. Zudem wurden zwei neue Synthesevarianten für die Herstellung thermosensitiver Gold QDs entwickelt werden. Sphärische Gold NP zeigen eine Plasmonenbande bei ~ 520 nm, die auf die kollektive Oszillation von Elektronen zurückzuführen ist. Gold NRs weisen aufgrund ihrer anisotropen Form zwei Plasmonenbanden auf, eine transversale Plasmonenbande bei ~ 520 nm und eine longitudinale Plasmonenbande, die vom Länge-zu-Durchmesser-Verhältnis der Gold NRs abhängig ist. Gold QDs besitzen keine Plasmonenbande, da ihre Elektronen Quantenbeschränkungen unterliegen. Gold QDs zeigen jedoch aufgrund diskreter Energieniveaus und einer Bandlücke Photolumineszenz (PL). Die synthetisierten Gold QDs besitzen eine Breitbandlumineszenz im Bereich von ~ 500-800 nm, wobei die Lumineszenz-eigenschaften (Emissionspeak, Quantenausbeute, Lebenszeiten) stark von den Herstellungs-bedingungen und den Oberflächenliganden abhängen. Die PL in Gold QDs ist ein sehr komplexes Phänomen und rührt vermutlich von Singulett- und Triplett-Zuständen her. Gold NRs und Gold QDs konnten in verschiedene Polymere wie bspw. Cellulosetriacetat eingearbeitet werden. Polymernanokomposite mit Gold NRs wurden erstmals unter definierten Bedingungen mechanisch gezogen, um Filme mit optisch anisotropen (richtungsabhängigen) Eigenschaften zu erhalten. Zudem wurde das Temperaturverhalten von Gold NRs und Gold QDs untersucht. Es konnte gezeigt werden, dass eine lokale Variation der Größe und Form von Gold NRs in Polymernanokompositen durch Temperaturerhöhung auf 225-250 °C erzielt werden kann. Es zeigte sich, dass die PL der Gold QDs stark temperaturabhängig ist, wodurch die PL QY der Proben beim Abkühlen (-7 °C) auf knapp 30 % verdoppelt und beim Erhitzen auf 70 °C nahezu vollständig gelöscht werden konnte. Es konnte demonstriert werden, dass die Länge der Alkylkette des Oberflächenliganden einen Einfluss auf die Temperaturstabilität der Gold QDs hat. Zudem wurden verschiedene neuartige und optisch anisotrope Sicherheitslabels mit Gold NRs sowie thermosensitive Sicherheitslabel mit Gold QDs entwickelt. Ebenso scheinen Gold NRs und QDs für die und die Optoelektronik (bspw. Datenspeicherung) und die Medizin (bspw. Krebsdiagnostik bzw. -therapie) von großem Interesse zu sein.