Refine
Has Fulltext
- yes (8) (remove)
Document Type
- Doctoral Thesis (6)
- Postprint (2)
Is part of the Bibliography
- yes (8)
Keywords
- synthesis (8) (remove)
Institute
- Institut für Chemie (8) (remove)
The remarkable antifouling properties of zwitterionic polymers in controlled environments are often counteracted by their delicate mechanical stability. In order to improve the mechanical stabilities of zwitterionic hydrogels, the effect of increased crosslinker densities was thus explored. In a first approach, terpolymers of zwitterionic monomer 3-[N -2(methacryloyloxy)ethyl-N,N-dimethyl]ammonio propane-1-sulfonate (SPE), hydrophobic monomer butyl methacrylate (BMA), and photo-crosslinker 2-(4-benzoylphenoxy)ethyl methacrylate (BPEMA) were synthesized. Thin hydrogel coatings of the copolymers were then produced and photo-crosslinked. Studies of the swollen hydrogel films showed that not only the mechanical stability but also, unexpectedly, the antifouling properties were improved by the presence of hydrophobic BMA units in the terpolymers.
Based on the positive results shown by the amphiphilic terpolymers and in order to further test the impact that hydrophobicity has on both the antifouling properties of zwitterionic hydrogels and on their mechanical stability, a new amphiphilic zwitterionic methacrylic monomer, 3-((2-(methacryloyloxy)hexyl)dimethylammonio)propane-1-sulfonate (M1), was synthesized in good yields in a multistep synthesis. Homopolymers of M1 were obtained by free-radical polymerization. Similarly, terpolymers of M1, zwitterionic monomer SPE, and photo-crosslinker BPEMA were synthesized by free-radical copolymerization and thoroughly characterized, including its solubilities in selected solvents.
Also, a new family of vinyl amide zwitterionic monomomers, namely 3-(dimethyl(2-(N -vinylacetamido)ethyl)ammonio)propane-1-sulfonate (M2), 4-(dimethyl(2-(N-vinylacetamido)ethyl)ammonio)butane-1-sulfonate (M3), and 3-(dimethyl(2-(N-vinylacetamido)ethyl)ammonio)propyl sulfate (M4), together with the new photo-crosslinker 4-benzoyl-N-vinylbenzamide (M5) that is well-suited for copolymerization with vinylamides, are introduced within the scope of the present work. The monomers are synthesized with good yields developing a multistep synthesis. Homopolymers of the new vinyl amide zwitterionic monomers are obtained by free-radical polymerization and thoroughly characterized. From the solubility tests, it is remarkable that the homopolymers produced are fully soluble in water, evidence of their high hydrophilicity. Copolymerization of the vinyl amide zwitterionic monomers, M2, M3, and M4 with the vinyl amide photo-crosslinker M5 proved to require very specific polymerization conditions. Nevertheless, copolymers were successfully obtained by free-radical copolymerization under appropriate conditions.
Moreover, in an attempt to mitigate the intrinsic hydrophobicity introduced in the copolymers by the photo-crosslinkers, and based on the proven affinity of quaternized diallylamines to copolymerize with vinyl amides, a new quaternized diallylamine sulfobetaine photo-crosslinker 3-(diallyl(2-(4-benzoylphenoxy)ethyl)ammonio)propane-1-sulfonate (M6) is synthesized. However, despite a priori promising copolymerization suitability, copolymerization with the vinyl amide zwitterionic monomers could not be achieved.
Two approaches for the synthesis of prenylated isoflavones were explored: the 2,3-oxidative rearrangement/cross metathesis approach, using hypervalent iodine reagents as oxidants and the Suzuki-Miyaura cross-coupling/cross metathesis approach. Three natural prenylated isoflavones: 5-deoxy-3′-prenylbiochanin A (59), erysubin F (61) and 7-methoxyebenosin (64), and non-natural analogues: 7,4′-dimethoxy-8,3′-diprenylisoflavone (126j) and 4′-hydroxy-7-methoxy-8,3′-diprenylisoflavone (128) were synthesized for the first time via the 2,3-oxidative rearrangement/cross metathesis approach, using mono- or diallylated flavanones as key intermediates. The reaction of flavanones with hypervalent iodine reagents afforded isoflavones via a 2,3-oxidative rearrangement and the corresponding flavone isomers via a 2,3-dehydrogenation. This afforded the synthesis of 7,4′-dimethoxy-8-prenylflavone (127g), 7,4′-dimethoxy-8,3′-diprenylflavone (127j), 7,4′-dihydroxy-8,3′-diprenylflavone (129) and 4′-hydroxy-7-methoxy-8,3′-diprenylflavone (130), the non-natural regioisomers of 7-methoxyebenosin, 126j, erysubin F and 128 respectively. Three natural prenylated isoflavones: 3′-prenylbiochanin A (58), neobavaisoflavone (66) and 7-methoxyneobavaisoflavone (137) were synthesized for the first time using the Suzuki-Miyaura cross-coupling/cross metathesis approach. The structures of 3′-prenylbiochanin A (58) and 5-deoxy-3′-prenylbiochanin A (59) were confirmed by single crystal X-ray diffraction analysis. The 2,3-oxidative rearrangement approach appears to be limited to the substitution pattern on both rings A and B of the flavanone while the Suzuki-Miyaura cross-coupling approach appears to be the most suitable for the synthesis of simple isoflavones or prenylated isoflavones whose prenyl substituents or allyl groups, the substituents that are essential precursors for the prenyl side chains, can be regioselectively introduced after the construction of the isoflavone core.
The chalcone-flavanone hybrids 146, 147 and 148, hybrids of the naturally occurring bioactive flavanones liquiritigenin-7-methyl ether, liquiritigenin and liquiritigenin-4′-methyl ether respectively were also synthesized for the first time, using Matsuda-Heck arylation and allylic/benzylic oxidation as key steps.
The intermolecular interactions of 5-deoxy-3′-prenylbiochanin A (59) and its two closely related precursors 106a and 106b was investigated by single crystal and Hirshfeld surface analyses to comprehend their different physicochemical properties. The results indicate that the presence of strong intermolecular O-H···O hydrogen bonds and an increase in the number of π-stacking interactions increases the melting point and lowers the solubility of isoflavone derivatives. However, the strong intermolecular O-H···O hydrogen bonds have a greater effect than the π-stacking interactions.
5-Deoxy-3′-prenylbiochanin A (59), erysubin F (61) and 7,4′-dihydroxy-8,3′-diprenylflavone (129), were tested against three bacterial strains and one fungal pathogen. All the three compounds were inactive against Salmonella enterica subsp. enterica (NCTC 13349), Escherichia coli (ATCC 25922), and Candida albicans (ATCC 90028), with MIC values greater than 80.0 μM. The diprenylated isoflavone erysubin F (61) and its flavone isomer 129 showed in vitro activity against methicillin-resistant Staphylococcus aureus (MRSA, ATCC 43300) at MIC values of 15.4 and 20.5 μM, respectively. 5-Deoxy-3′-prenylbiochanin A (59) was inactive against this MRSA strain. Erysubin F (61) and its flavone isomer 129 could serve as lead compounds for the development of new alternative drugs for the treatment of MRSA infections.
Natural products have proved to be a major resource in the discovery and development of many pharmaceuticals that are in use today. There is a wide variety of biologically active natural products that contain conjugated polyenes or benzofuran structures. Therefore, new synthetic methods for the construction of such building blocks are of great interest to synthetic chemists. The recently developed one-pot tethered ring-closing metathesis approach allows for the formation of Z,E-dienoates in high stereoselectivity. The extension of this method with a Julia-Kocienski olefination protocol would allow for the formation of conjugated trienes in a stereoselective manner. This strategy was applied in the total synthesis of conjugated triene containing (+)-bretonin B. Additionally, investigations of cross metathesis using methyl substituted olefins were pursued. This methodology was applied, as a one-pot cross metathesis/ring-closing metathesis sequence, in the total synthesis of benzofuran containing 7-methoxywutaifuranal. Finally, the design and synthesis of a catalyst for stereoretentive metathesis in aqueous media was investigated.
The structures and synthesis of polyzwitterions ("polybetaines") are reviewed, emphasizing the literature of the past decade. Particular attention is given to the general challenges faced, and to successful strategies to obtain polymers with a true balance of permanent cationic and anionic groups, thus resulting in an overall zero charge. Also, the progress due to applying new methodologies from general polymer synthesis, such as controlled polymerization methods or the use of "click" chemical reactions is presented. Furthermore, the emerging topic of responsive ("smart") polyzwitterions is addressed. The considerations and critical discussions are illustrated by typical examples.
Radical reactions have found many applications in carbohydrate chemistry, especially in the construction of carbon–carbon bonds. The formation of carbon–heteroatom bonds has been less intensively studied. This mini-review will summarize the efforts to add heteroatom radicals to unsaturated carbohydrates like endo-glycals. Starting from early examples, developed more than 50 years ago, the importance of such reactions for carbohydrate chemistry and recent applications will be discussed. After a short introduction, the mini-review is divided in sub-chapters according to the heteroatoms halogen, nitrogen, phosphorus, and sulfur. The mechanisms of radical generation by chemical or photochemical processes and the subsequent reactions of the radicals at the 1-position will be discussed. This mini-review cannot cover all aspects of heteroatom-centered radicals in carbohydrate chemistry, but should provide an overview of the various strategies and future perspectives
In the interest of producing functional catalysts from sustainable building-blocks, 1, 3-dicarboxylate imidazolium salts derived from amino acids were successfully modified to be suitable as N-Heterocyclic carbene (NHC) ligands within metal complexes. Complexes of Ag(I), Pd(II), and Ir(I) were successfully produced using known procedures using ligands derived from glycine, alanine, β-alanine and phenylalanine. The complexes were characterized in solid state using X-Ray crystallography, which allowed for the steric and electronic comparison of these ligands to well-known NHC ligands within analogous metal complexes.
The palladium complexes were tested as catalysts for aqueous-phase Suzuki-Miyaura cross-coupling. Water-solubility could be induced via ester hydrolysis of the N-bound groups in the presence of base. The mono-NHC–Pd complexes were seen to be highly active in the coupling of aryl bromides with phenylboronic acid; the active catalyst of which was determined to be mostly Pd(0) nanoparticles. Kinetic studies determined that reaction proceeds quickly in the coupling of bromoacetophenone, for both pre-hydrolyzed and in-situ hydrolysis catalyst dissolution. The catalyst could also be recycled for an extra run by simply re-using the aqueous layer.
The imidazolium salts were also used to produce organosilica hybrid materials. This was attempted via two methods: by post-grafting onto a commercial organosilica, and co-condensation of the corresponding organosilane. The co-condensation technique harbours potential for the production of solid-support catalysts.
Typische assoziative Verdicker für wässrige Systeme basieren auf linearen, doppelt hydrophob endmodifizierten Poly(ethylenglykolen) (PEGs). Diese Polymere aggregieren aufgrund ihrer Struktur in wässriger Lösung und bilden ein Netzwerk aus verbrückten Polymer-Mizellen. Dabei kann ein Polymer-Molekül maximal zwei Mizellen miteinander verbinden. Bisher ist unklar, wie die Anzahl der Endgruppen eines verzweigten, mehrfach hydrophob endmodifizierten hydrophilen Polymers die Struktur und Dynamik solcher Netzwerke beeinflusst. Die Synthese verzweigter Polymere auf PEG-Basis erfolgt mittels lebender ionischer Polymerisation und ist experimentell aufwändig. Das Einführen hydrophober Endgruppen erfordert zusätzliche Synthese-Schritte. In dieser Arbeit wurden hydrophile Sternpolymere mit hydrophoben Endgruppen in einem Schritt hergestellt. Dazu wurde die Technik der radikalischen Polymerisation unter Kettenübertragung durch reversible Addition und anschließende Fragmentierung (reversible addition-fragmentation chain transfer, RAFT) genutzt. Die Synthese der Sternpolymere erfolgte von einem multifunktionalen Kern, der die R-Gruppe der RAFT-Kettenüberträger (chain transfer agents, CTAs) bildete. Die dazu benötigten CTAs wurden so konzipiert, dass mit ihrer Hilfe sowohl die Anzahl der Arme des Sternpolymers (von 2 bis 4), als auch die Länge der hydrophoben Endgruppe (C4, C12, C18) variiert werden konnte. Der große Vorteil der RAFT-Polymerisation ist, dass sie viele polare Monomere für die Synthese der hydrophilen Arme des Sternpolymers toleriert. In dieser Arbeit wurden als Modell-Monomere Oligo(ethylenglykol)methylether-acrylat (OEGA) und N,N-Dimethylacrylamid (DMA) eingesetzt. Beide Monomere bilden nicht-ionische hydrophile Polymere. Poly(OEGA) ist ein Kammpolymer, das auf PEG basiert. Poly(DMA) besitzt dagegen eine deutlich kompaktere Struktur. Die erhaltenen amphiphilen Sternpolymere wurden umfassend molekular charakterisiert. Die Molmassen wurden mit verschiedenen GPC-Systemen bestimmt und der Grad der Endgruppenfunktionalisierung wurde mittels UV/Vis- und 1H-NMR-Spektroskopie überprüft. Die Polymerisation von OEGA zeigt mit den CTAs einige Charakteristika der Polymerisation mit reversibler Deaktivierung (RDRP, auch „kontrollierte radikalische Polymerisation“), wird aber durch Kettenübertragung zum Monomer bzw. Polymer gestört. Diese Nebenreaktion ist auf die Struktur des Monomers als Oligoether zurückzuführen. Bei allen untersuchten Polymerisationen von DMA mit den multifunktionalen CTAs steigt die Molmasse linear mit dem Umsatz. Die erhaltenen Polymere zeigen durchweg monomodale und enge Molmassenverteilungen (PDI ≤ 1,2). Die Molmassen lassen sich in einem weiten Bereich von 25 kg/mol bis 150 kg/mol einstellen und die Endgruppen der Polymere bleiben zu 90 % erhalten. Während die Polymerisation von DMA sowohl mit den di- als auch den trifunktionalen CTAs innerhalb von 3 h zu quantitativen Umsätzen verläuft, wird der quantitative Umsatz des Monomers bei der Polymerisation mit tetrafunktionalen CTAs erst nach 4 h erreicht. Diese Verzögerung ist auf eine Retardierung in der Anfangsphase der Polymerisation zurückzuführen, die sich aus der besonderen Struktur der tetrafunktionalen CTAs erklärt. Auf dem System zur Polymerisation von DMA aufbauend ließen sich Gradienten-Block-Copolymere in Eintopfreaktionen herstellen. Dazu wurde nach Erreichen des quantitativen Umsatzes von DMA ein zweites Monomer zur Reaktionsmischung gegeben. Mit Ethylacrylat (EtA) wurden so lineare amphiphile symmetrische Triblock-Copolymere erhalten. Dabei wurde die Länge des hydrophoben Blocks durch unterschiedliche Mengen an EtA variiert. Mit N,N-Diethylacrylamid (DEA) wurden lineare symmetrische Triblock-Copolymere sowie 3-Arm Stern-Diblock-Copolymere hergestellt, die über einen thermisch schaltbaren zweiten Block verfügen. Bei diesen Polymeren lässt sich die Länge des hydrophoben Teils in situ durch Veränderung der Temperatur variieren. Das Verhalten der amphiphilen Sternpolymere in wässriger Lösung und in Mikroemulsion wurde im Rahmen einer Kooperation an der TU Berlin mit Hilfe von Kleinwinkel-Neutronenstreuung (SANS), dynamischer Lichtstreuung (DLS) und Rheologie untersucht. Die Polymere wirken durch Assoziation der hydrophoben Endgruppen als effektive Verdicker sowohl allein in wässriger Lösung als auch in Mikroemulsion. Die Struktur des gebildeten Netzwerks hängt dabei von der Konzentration des Polymers in der Lösung und der Länge der Endgruppe (Hydrophobie) ab. Die dynamischen Eigenschaften der Lösungen werden außerdem durch die Anzahl der Arme der Polymere bestimmt.
Ein Spezialgebiet der modernen Mikroelektronik ist die Miniaturisierung und Entwicklung von neuen nanostrukturierten und Komposit-Materialen aus 3d-Metallen. Durch geeignete Zusammensetzungen können diese sowohl mit einer hohen Sättigungsmagnetisierung und Koerzitivfeldstärke als mit besserer Oxidationsbeständigkeit im Vergleich zu den reinen Elementen erzielt werden. In der vorliegenden Arbeit werden neue Methoden für die Herstellung von bimetallischen kolloidalen Nanopartikeln vor allem mit einer Kern-Hülle-Struktur (Kern@Hülle) präsentiert. Bei der überwiegenden Zahl der vorgestellten Reaktionen handelt es sich um die thermische Zersetzung von metallorganischen Verbindungen wie Kobaltcarbonyl, Palladium- und Platinacetylacetonate oder die chemische Reduktion von Metallsalze mit langkettigem Alkohol in organischem Lösungsmittel. Daneben sind auch Kombinationen aus diesen beiden Verfahren beschrieben. Es wurden Kolloide aus einem reinen Edelmetall (Pt, Pd, Ag) in einem organischen Lösungsmittel synthetisiert und daraus neue, bisher in dieser Form nicht bekannte Ag@Co-, Pt@Co-, Pd@Co- und Pt@Pd@Co-Nanopartikel gewonnen. Der Kobaltgehalt der Ag@Co-, Teilchen konnte im Bereich von 5 bis 73 At. % beliebig eingestellt werden. Der mittlere Durchmesser der Ag@Co-Partikel wurde von 5 nm bis 15 nm variiert. Bei der Herstellung von Pt@Co-Teilchen wurde eine unterschiedlich dicke Kobalt-Hülle von ca. 1,0 bis 2,5 nm erzielt. Im Fall des Palladiums wurden sowohl monodispere als auch polydisperse Pd-Nanopartikel mit einer maximal 1,7-2,0nm dicken Kobalthülle synthetisiert. Ein großer Teil dieser Arbeit befasst sich mit den magnetischen Eigenschaften der kolloidalen Teilchen, wobei die SQUID-Magnetometrie und Röntgenzirkulardichroismus (XMCD) dafür eingesetzt wurden. Weil magnetische Messungen alleine nur indirekte Schlüsse über die untersuchten Systeme erlauben, wurde dabei besonderer Wert auf die möglichst genaue strukturelle Charakterisierung der Proben mittels moderner Untersuchungsmethoden gelegt. Röntgendiffraktometrie (XRD), Röntgenabsorptionsfeinstruktur- (EXAFS) und UV-Vis-Spektroskopie sowie Transmissionselektronenmikroskopie (TEM) in Kombination mit Elektronen Energieverlustspektroskopie (EELS) und energiedispersive Röntgenfluoreszensanalyse (EDX) wurden verwendet.