Filtern
Volltext vorhanden
- ja (37) (entfernen)
Erscheinungsjahr
- 2015 (37) (entfernen)
Dokumenttyp
- Postprint (31)
- Dissertation (6)
Gehört zur Bibliographie
- ja (37) (entfernen)
Schlagworte
- Confocal microscopy (1)
- Debus-Radziszewski polymerization (1)
- Fluorescence imaging (1)
- Fluorescence spectroscopy (1)
- Fluorescent probes (1)
- Fluoreszenzsensor (1)
- Formationsfluid (1)
- Fällungsreaktion (1)
- Groß Schönebeck (1)
- Herkunft (1)
Institut
- Institut für Chemie (37) (entfernen)
The present article is among the first reports on the effects of poly(ampholyte)s and poly(betaine)s on the biomimetic formation of calcium phosphate. We have synthesized a series of di- and triblock copolymers based on a non-ionic poly(ethylene oxide) block and several charged methacrylate monomers, 2-(trimethylammonium)ethyl methacrylate chloride, 2-((3-cyanopropyl)-dimethylammonium)ethyl methacrylate chloride, 3-sulfopropyl methacrylate potassium salt, and [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide. The resulting copolymers are either positively charged, ampholytic, or betaine block copolymers. All the polymers have very high molecular weights of over 106 g mol−1. All polymers are water-soluble and show a strong effect on the precipitation and dissolution of calcium phosphate. The strongest effects are observed with triblock copolymers based on a large poly(ethylene oxide) middle block (nominal Mn = 100 000 g mol−1). Surprisingly, the data show that there is a need for positive charges in the polymers to exert tight control over mineralization and dissolution, but that the exact position of the charge in the polymer is of minor importance for both calcium phosphate precipitation and dissolution.
We investigate the ergodic properties of a random walker performing (anomalous) diffusion on a random fractal geometry. Extensive Monte Carlo simulations of the motion of tracer particles on an ensemble of realisations of percolation clusters are performed for a wide range of percolation densities. Single trajectories of the tracer motion are analysed to quantify the time averaged mean squared displacement (MSD) and to compare this with the ensemble averaged MSD of the particle motion. Other complementary physical observables associated with ergodicity are studied, as well. It turns out that the time averaged MSD of individual realisations exhibits non-vanishing fluctuations even in the limit of very long observation times as the percolation density approaches the critical value. This apparent non-ergodic behaviour concurs with the ergodic behaviour on the ensemble averaged level. We demonstrate how the non-vanishing fluctuations in single particle trajectories are analytically expressed in terms of the fractal dimension and the cluster size distribution of the random geometry, thus being of
purely geometrical origin. Moreover, we reveal that the convergence scaling law to ergodicity, which is known to be inversely proportional to the observation time T for ergodic diffusion processes, follows a power-law BT� h with h o 1 due to the fractal structure of the accessible space. These results provide useful measures for differentiating the subdiffusion on random fractals from an otherwise closely related process, namely, fractional Brownian motion. Implications of our results on the analysis of single particle tracking experiments are provided.
Ziel dieser Arbeit war die Synthese und Charakterisierung von neuartigen fluoreszierenden Copolymeren zur Analytdetektion in wässrigen Systemen. Das Detektionssystem sollte ein einfaches Schalten der Fluoreszenz bei Analytbindung „Aus“ bzw. Verdrängung „An“ ermöglichen. Dafür wurde die Synthese eines funktionalisierten Monomers so geplant, dass sich Fluorophor und Analyt innerhalb derselben Monomereinheit in direkter Nachbarschaft zueinander befinden. So sollten bei Erkennung des Analyten durch eine mit einem Fluoreszenzlöscher funktionalisierte Erkennungsstruktur Fluorophor und Löscher in einen vorgegebenen Abstand zueinander gezwungen und die Fluoreszenz des Fluorophors effizient gelöscht werden. Bei anschließender Verdrängung der Erkennungseinheit durch einen stärker bindenden Analyten sollte die Fluoreszenz wieder „angeschaltet“ werden. Eine weitere Zielstellung für das Detektionssystem war eine hohe Löslichkeit und Fluoreszenzintensität in Wasser. Da die Anwendung solcher Sensoren besonders in der Medizin und Biologie, z.B. für Schnellerkennungstest von Pathogenen, von Interesse ist, ist die Kompatibilität mit wässrigen Medien essentiell. Die funktionalisierten Monomere wurden frei radikalisch mit N Vinyl-pyrrolidon bzw. N Vinyl¬caprolactam zu wasserlöslichen, fluoreszierenden Copolymeren umgesetzt. In den N-Vinyl¬pyrrolidon-Polymeren (PNVP) wurde RhodaminB, in den thermoresponsiven N Vinyl¬caprolactam-Polymeren (PNVCL) ein Naphthalsäureimid als Fluorophor verwendet. Während Rhodamine eine hohe Fluoreszenzintensität, gute Quantenausbeuten und hohen Extinktionskoeffizienten in Wasser zeigen, sind Naphthalsäure¬imide umgebungssensitive Chromophore, die bei Änderung ihrer Lösungsmittelumgebung, wie z.B. beim Kollaps eines thermoresponsiven Polymers in Wasser, ihre Fluoreszenzintensität und Quantenausbeute drastisch ändern können. Der Vorteil der hier verwendeten Strategie der Monomersynthese liegt darin, dass bei jeder spezifischen Analytdetektion durch eine Erkennungseinheit die Fluoreszenz effizient gelöscht bzw. bei Verdrängung durch einen stärker bindenden Analyten wieder „angeschaltet“ wird. Dieses Prinzip wird bereits vielfach in der Biologie in sogenannten „Molecular Beacons“ ausgenutzt, wobei ein Fluorophor und ein Löscher durch spezifische DNA Basenpaarung in einen vorgegebenen Abstand zueinander gezwungen werden und so ein „Schalten“ der Fluoreszenz ermöglichen. Aufgrund der vorgegebenen Struktur der DNA Basensequenzen ist es jedoch nicht direkt auf andere Erkennungsreaktionen übertragbar. Daher wurde ein Modellsystem entwickelt, welches die Möglichkeit bietet Analyt, Erkennungseinheit und Signalgeber variabel, je nach Anforderungen des Systems, auszutauschen. So soll es möglich sein, den Sensor a priori für jede Erkennungs¬reaktion zu verwenden. Als Modell Bindungs¬paare wurden ß Cyclodextrin/Adamantan und Con¬cana¬valinA/Mannose ausgewählt. Adamantan bzw. Mannose wurde als Analyt zusammen mit dem Fluorophor in das Polymer eingebunden. ß Cyclo¬dextrin (ß CD) bzw. ConcanavalinA (ConA) wurde als Erkennungsstruktur an einem Fluoreszenzlöscher immobilisiert. Polymer-basierte Fluoreszenzsensoren sind in der Fachliteratur gut dokumentiert. In der Regel sind Signalgeber und Analyt jedoch statistisch im Polymer verteilt, da sie sich entweder in unterschiedlichen Monomereinheiten befinden oder die Funktionalisierung durch eine polymeranaloge Umsetzung erfolgt. Der gewählte Ansatz Fluorophor und Analyt innerhalb derselben Monomereinheit einzubinden, soll bei jeder Erkennungsreaktion des Analyten zu einer Änderung der Signalintensität des Fluorophors führen. Eine hohe Signalintensität bei Analytdetektion ist wünschenswert, insbesondere für Erkennungsreaktionen, die mit möglichst geringem apparativem Aufwand, am besten mit dem bloßen Auge zu verfolgen sein sollen. Des Weiteren ist es möglich den Fluorophorgehalt im Polymer genau einzustellen und so Selbstlöschung zu vermeiden. Die synthetisierten Polymere haben einen Fluorophorgehalt von 0,01 mol% bis 0,5 mol%. Für die RhodaminB haltigen Polymere zeigte sich, dass ein Fluorophorgehalt unterhalb 0,1 mol% im Polymer die höchsten Ausbeuten, Molmassen und Quantenausbeuten liefert. Für die Naphthalsäureimid haltigen Polymere hingegen wurden auch für einen Fluorophorgehalt von bis zu 1 mol% hohe Ausbeuten und Molmassen erreicht. Die Naphthalsäureimid haltigen Polymere haben jedoch in wässriger Lösungsmittelumgebung nur geringe Quantenausbeuten. Als Fluoreszenzlöscher wurden Goldnanopartikel synthetisiert, die mit den entsprechenden Erkennungsstrukturen (ß-CD oder ConA) für den verwendeten Analyten funktionalisiert wurden. Goldnanopartikel als Löscher bieten den Vorteil, dass ihre Dispergierbarkeit in einem Lösemittel durch Funktionalisierung ihrer Hülle gezielt gesteuert werden kann. Durch die hohe Affinität von Goldnanopartikeln zu Thiolen und Aminen konnten sie mit Hilfe einfacher Syntheseschritte mit Thio ß CD Derivaten bzw. ConA funktionalisiert werden. In der hier vorgelegten Arbeit sollte ein Modellsystem für einen solches fluoreszenz-basiertes Detektionssystem in Wasser entwickelt werden. Nachfolgend werden die zu erfüllenden strukturellen Voraussetzungen für die Synthese eines solchen Sensors nochmals zusammengefasst:
1. Verwendung eines Fluorophors, der eine hohe Signalintensität zeigt.
2. Analyt bzw. Erkennungseinheit soll sich im Abstand von wenigen Nanometern zum Signalgeber befinden, um bei jeder Detektionsreaktion die Signalintensität des Signalgebers beeinflussen zu können.
3. Die Detektionseinheit benötigt eine funktionelle Gruppe zur Immobilisierung. Immobilisierung kann z.B. durch Einbindung in ein Polymer erfolgen.
4. Der Fluorophor soll bei Änderung seiner lokalen Umgebung, durch Binden eines Löschers oder Änderung seiner Lösemittelumgebung seine Fluoreszenzeigenschaften drastisch ändern.
5. Die Reaktion sollte schnell und mit möglichst geringem apparativem Aufwand, am besten mit bloßem Auge zu verfolgen sein.
Für das ß-CD/Adamantan Modellsystem wurde ein Fluoreszenz Aus/An Sensor entwickelt, der bei Binden ß CD funktionalisierter Goldnanopartikel an das polymergebundene Adamantan die Fluoreszenz des RhodaminB Fluorophors effizient löscht und bei Verdrängung der Goldnanopartikel wieder zurück gewinnt. Dies konnte auch mit bloßem Auge verfolgt werden.
Für die Naphthalsäureimid Monomere, die mit NVCL copolymerisiert wurden, wurde abhängig von der lokalen Umgebung des Fluorophors eine unterschiedliche Verstärkung der Fluoreszenzintensität bei Überschreiten des Trübungspunktes des Polymers gefunden. Dabei zeigte sich, dass die Einführung eines Abstandshalters zwischen Polymerrückgrat und Fluorophor zu einer großen Fluoreszenz¬verstärkung führt, während sich ohne Abstandshalter die Fluoreszenzintensität bei Über¬schreiten des Trübungspunktes kaum ändert.
In living cells, there are always a plethora of processes taking place at the same time. Their precise regulation is the basis of cellular functions, since small failures can lead to severe dysfunctions. For a comprehensive understanding of intracellular homeostasis, simultaneous multiparameter detection is a versatile tool for revealing the spatial and temporal interactions of intracellular parameters. Here, a recently developed time-correlated single-photon counting (TCSPC) board was evaluated for simultaneous fluorescence and phosphorescence lifetime imaging microscopy (FLIM/PLIM). Therefore, the metabolic activity in insect salivary glands was investigated by recording ns-decaying intrinsic cellular fluorescence, mainly related to oxidized flavin adenine dinucleotide (FAD) and the μs-decaying phosphorescence of the oxygen-sensitive ruthenium-complex Kr341. Due to dopamine stimulation, the metabolic activity of salivary glands increased, causing a higher pericellular oxygen consumption and a resulting increase in Kr341 phosphorescence decay time. Furthermore, FAD fluorescence decay time decreased, presumably due to protein binding, thus inducing a quenching of FAD fluorescence decay time. Through application of the metabolic drugs antimycin and FCCP, the recorded signals could be assigned to a mitochondrial origin. The dopamine-induced changes could be observed in sequential FLIM and PLIM recordings, as well as in simultaneous FLIM/PLIM recordings using an intermediate TCSPC timing resolution.
The distinction of enantiomers is a key aspect of chemical analysis. In mass spectrometry the distinction of enantiomers has been achieved by ionizing the sample with circularly polarized laser pulses and comparing the ion yields for light of opposite handedness. While resonant excitation conditions are expected to be most efficient, they are not required for the detection of a circular dichroism (CD) in the ion yield. However, the prediction of the size and sign of the circular dichroism becomes challenging if non-resonant multiphoton excitations are used to ionize the sample. Employing femtosecond laser pulses to drive electron wavepacket dynamics based on ab initio calculations, we attempt to reveal underlying mechanisms that determine the CD under non-resonant excitation conditions. Simulations were done for (R)-1,2-propylene oxide, using time-dependent configuration interaction singles with perturbative doubles (TD-CIS(D)) and the aug-cc-pVTZ basis set. Interactions between the electric field and the electric dipole and quadrupole as well as between the magnetic field and the magnetic dipole were explicitly accounted for. The ion yield was determined by treating states above the ionization potential as either stationary or non-stationary with energy-dependent lifetimes based on an approved heuristic approach. The observed population dynamics do not allow for a simple interpretation, because of highly non-linear interactions. Still, the various transition pathways are governed by resonant enantiospecific n-photon excitation, with preferably high transition dipole moments, which eventually dominate the CD in the ionized population.
Exposure to organic mercury compounds promotes primarily neurological effects. Although methylmercury is recognized as a potent neurotoxicant, its transfer into the central nervous system (CNS) is not fully evaluated. While methylmercury and thiomersal pass the blood–brain barrier, limited data are available regarding the second brain regulating interface, the blood–cerebrospinal fluid (CSF) barrier. This novel study was designed to investigate the effects of organic as well as inorganic mercury compounds on, and their transfer across, a porcine in vitro model of the blood–CSF barrier for the first time. The barrier system is significantly more sensitive towards organic Hg compounds as compared to inorganic compounds regarding the endpoints cytotoxicity and barrier integrity. Whereas there are low transfer rates from the blood side to the CSF side, our results strongly indicate an active transfer of the organic mercury compounds out of the CSF. These results are the first to demonstrate an efflux of organic mercury compounds regarding the CNS and provide a completely new approach in the understanding of mercury compounds specific transport.
Arsenic-containing fatty acids are a group of fat-soluble arsenic species (arsenolipids) which are present in marine fish and other seafood. Recently, it has been shown that arsenic-containing hydrocarbons, another group of arsenolipids, exert toxicity in similar concentrations comparable to arsenite although the toxic modes of action differ. Hence, a risk assessment of arsenolipids is urgently needed. In this study the cellular toxicity of a saturated (AsFA 362) and an unsaturated (AsFA 388) arsenic-containing fatty acid and three of their proposed metabolites (DMAV, DMAPr and thio-DMAPr) were investigated in human liver cells (HepG2). Even though both arsenic-containing fatty acids were less toxic as compared to arsenic-containing hydrocarbons and arsenite, significant effects were observable at μM concentrations. DMAV causes effects in a similar concentration range and it could be seen that it is metabolised to its highly toxic thio analogue thio-DMAV in HepG2 cells. Nevertheless, DMAPr and thio-DMAPr did not exert any cytotoxicity. In summary, our data indicate that risks to human health related to the presence of arsenic-containing fatty acids in marine food cannot be excluded. This stresses the need for a full in vitro and in vivo toxicological characterisation of these arsenolipids.
Fully renewable pyridinium ionic liquids were synthesised via the hydrothermal decarboxylation of pyridinium zwitterions derived from furfural and amino acids in flow. The functionality of the resulting ionic liquid (IL) can be tuned by choice of different amino acids as well as different natural carboxylic acids as the counterions. A representative member of this new class of ionic liquids was successfully used for the synthesis of ionogels and as a solvent for the Heck coupling.
Double cyclization of short linear peptides obtained by solid phase peptide synthesis was used to prepare bridged bicyclic peptides (BBPs) corresponding to the topology of bridged bicyclic alkanes such as norbornane. Diastereomeric norbornapeptides were investigated by 1H-NMR, X-ray crystallography and CD spectroscopy and found to represent rigid globular scaffolds stabilized by intramolecular backbone hydrogen bonds with scaffold geometries determined by the chirality of amino acid residues and sharing structural features of β-turns and α-helices. Proteome profiling by capture compound mass spectrometry (CCMS) led to the discovery of the norbornapeptide 27c binding selectively to calmodulin as an example of a BBP protein binder. This and other BBPs showed high stability towards proteolytic degradation in serum.
Nonlinear optical response of photochromic azobenzene-functionalized self-assembled monolayers
(2015)
The combination of photochromic and nonlinear optical (NLO) properties of azobenzene-functionalized self-assembled monolayers (SAMs) constitutes an intriguing step towards novel photonic and optoelectronic devices. By utilizing the second-order NLO process of second harmonic generation (SHG), supported by density-functional theory and correlated wave function method calculations, we demonstrate that the photochromic interface provides the necessary prerequisites en route towards possible future technical applications: we find a high NLO contrast on the order of 16% between the switching states. These are furthermore accessible reversibly and with high efficiencies in terms of cross sections on the order of 10−18 cm2 for both photoisomerization reactions, i.e., drivable by means of low-power LED light sources. Finally, both photostationary states (PSSs) are thermally stable at ambient conditions.
In this work we present a CMOS high frequency direct immunosensor operating at 6 GHz (C-band) for label free determination of creatinine. The sensor is fabricated in standard 0.13 μm SiGe:C BiCMOS process. The report also demonstrates the ability to immobilize creatinine molecules on a Si3N4 passivation layer of the standard BiCMOS/CMOS process, therefore, evading any further need of cumbersome post processing of the fabricated sensor chip. The sensor is based on capacitive detection of the amount of non-creatinine bound antibodies binding to an immobilized creatinine layer on the passivated sensor. The chip bound antibody amount in turn corresponds indirectly to the creatinine concentration used in the incubation phase. The determination of creatinine in the concentration range of 0.88–880 μM is successfully demonstrated in this work. A sensitivity of 35 MHz/10 fold increase in creatinine concentration (during incubation) at the centre frequency of 6 GHz is gained by the immunosensor. The results are compared with a standard optical measurement technique and the dynamic range and sensitivity is of the order of the established optical indication technique. The C-band immunosensor chip comprising an area of 0.3 mm2 reduces the sensing area considerably, therefore, requiring a sample volume as low as 2 μl. The small analyte sample volume and label free approach also reduce the experimental costs in addition to the low fabrication costs offered by the batch fabrication technique of CMOS/BiCMOS process.
Paper-based microfluidics provide an inexpensive, easy to use technology for point-of-care diagnostics in developing countries. Here, we combine paper-based microfluidic devices with responsive hydrogels to add an entire new class of functions to these versatile low-cost fluidic systems. The hydrogels serve as fluid reservoirs. In response to an external stimulus, e.g. an increase in temperature, the hydrogels collapse and release fluid into the structured paper substrate. In this way, chemicals that are either stored on the paper substrate or inside the hydrogel pads can be dissolved, premixed, and brought to reaction to fulfill specific analytic tasks. We demonstrate that multi-step sequences of chemical reactions can be implemented in a paper-based system and operated without the need for external precision pumps. We exemplify this technology by integrating an antibody-based E. coli test on a small and easy to use paper device.
Temperature-memory polymers remember the temperature, where they were deformed recently, enabled by broad thermal transitions. In this study, we explored a series of crosslinked poly[ethylene-co-(vinyl acetate)] networks (cPEVAs) comprising crystallizable polyethylene (PE) controlling units exhibiting a pronounced temperature-memory effect (TME) between 16 and 99 °C related to a broad melting transition (∼100 °C). The nanostructural changes in such cPEVAs during programming and activation of the TME were analyzed via in situ X-ray scattering and specific annealing experiments. Different contributions to the mechanism of memorizing high or low deformation temperatures (Tdeform) were observed in cPEVA, which can be associated to the average PE crystal sizes. At high deformation temperatures (>50 °C), newly formed PE crystals, which are established during cooling when fixing the temporary shape, dominated the TME mechanism. In contrast, at low Tdeform (<50 °C), corresponding to a cold drawing scenario, the deformation led preferably to a disruption of existing large crystals into smaller ones, which then fix the temporary shape upon cooling. The observed mechanism of memorizing a deformation temperature might enable the prediction of the TME behavior and the knowledge based design of other TMPs with crystallizable controlling units.
The main focus of the present thesis was to investigate the stabilization ability of poly(ionic liquid)s (PILs) in several examples as well as develop novel chemical structures and synthetic routes of PILs. The performed research can be specifically divided into three parts that include synthesis and application of hybrid material composed of PIL and cellulose nanofibers (CNFs), thiazolium-containing PILs, and main-chain imidazolium-type PILs.
In the first chapter, a vinylimidazolium-type IL was polymerized in water in the presence of CNFs resulting in the in situ electrostatic grafting of polymeric chains onto the surface of CNFs. The synthesized hybrid material merged advantages of its two components, that is, superior mechanical strength of CNFs and anion dependent solution properties of PILs. In contrast to unmodified CNFs, the hybrid could be stabilized and processed in organic solvents enabling its application as reinforcing agent for porous polyelectrolyte membranes.
In the second part, PILs and ionic polymers containing two types of thiazolium repeating units were synthesized. Such polymers displayed counterion dependent thermal stability and solubility in organic solvents of various dielectric constants. This new class of PILs was tested as stabilizers and phase transfer agents for carbon nanotubes in aqueous and organic media, and as binder materials to disperse electroactive powders and carbon additives in solid electrode in lithium-ion batteries. The incorporation of S and N atoms into the polymeric structures make such PILs also potential precursors for S, N - co-doped carbons.
In the last chapter, reactants originating from biomass were successfully harnessed to synthesize main-chain imidazolium-type PILs. An imidazolium-type diester IL obtained via a modified Debus-Radziszewski reaction underwent transesterification with diol in a polycondensation reaction. This yielded a polyester-type PIL which CO2 sorption properties were investigated. In the next step, the modified Debus-Radziszewski reaction was further applied to synthesize main-chain PILs according to a convenient, one-step protocol, using water as a green solvent and simple organic molecules as reagents. Depending on the structure of the employed diamine, the synthesized PILs after anion exchange showed superior thermal stability with unusually high carbonization yields.
Overall, the outcome of these studies will actively contribute to the current research on PILs by introducing novel PIL chemical structures, improved synthetic routes, and new examples of stabilized materials. The synthesis of main-chain imidazolium-type PILs by a modified Debus-Radziszewski reaction is of a special interest for the future work on porous ionic liquid networks as well as colloidal PIL nanoparticles.
The simulation of the optical properties of supramolecular aggregates requires the development of methods, which are able to treat a large number of coupled chromophores interacting with the environment. Since it is currently not possible to treat large systems by quantum chemistry, the Frenkel exciton model is a valuable alternative. In this work we show how the Frenkel exciton model can be extended in order to explain the excitonic spectra of a specific double-walled tubular dye aggregate explicitly taking into account dispersive energy shifts of ground and excited states due to van der Waals interaction with all surrounding molecules. The experimentally observed splitting is well explained by the site-dependent energy shift of molecules placed at the inner or outer side of the double-walled tube, respectively. Therefore we can conclude that inclusion of the site-dependent dispersive effect in the theoretical description of optical properties of nanoscaled dye aggregates is mandatory.
cis-Diamminedichloroplatinum(II) (Cisplatin) is one of the most important and frequently used cytostatic drugs for the treatment of various solid tumors. Herein, a laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) method incorporating a fast and simple sample preparation protocol was developed for the elemental mapping of Cisplatin in the model organism Caenorhabditis elegans (C. elegans). The method allows imaging of the spatially-resolved elemental distribution of platinum in the whole organism with respect to the anatomic structure in L4 stage worms at a lateral resolution of 5 μm. In addition, a dose- and time-dependent Cisplatin uptake was corroborated quantitatively by a total reflection X-ray fluorescence spectroscopy (TXRF) method, and the elemental mapping indicated that Cisplatin is located in the intestine and in the head of the worms. Better understanding of the distribution of Cisplatin in this well-established model organism will be instrumental in deciphering Cisplatin toxicity and pharmacokinetics. Since the cytostatic effect of Cisplatin is based on binding the DNA by forming intra- and interstrand crosslinks, the response of poly(ADP-ribose)metabolism enzyme 1 (pme-1) deletion mutants to Cisplatin was also examined. Loss of pme-1, which is the C. elegans ortholog of human poly(ADP-ribose) polymerase 1 (PARP-1) led to disturbed DNA damage response. With respect to survival and brood size, pme-1 deletion mutants were more sensitive to Cisplatin as compared to wildtype worms, while Cisplatin uptake was indistinguishable.
Die Doktorarbeit behandelt die Synthese Kohlenstoffnitrid basierter Materialien in eutektischen Mischungen bivalenter Metallchloride. Der Fokus liegt dabei auf ZnCl2-, SnCl2- und CoCl2-haltigen eutektischen Mischungen, in denen die Kondensation gebräuchlicher organischer Precursoren durchgeführt wird. Im Rahmen dessen wird untersucht wie durch die Reaktionsführung in Salzschmelzen unterschiedlicher Lewis-Acidität, neben der Molekülstruktur andere charakteristische Eigenschaften, wie Morphologie, Kristallinität und spezifische Oberflächen, der Materialien kontrolliert werden können. Darüber hinaus werden die optischen Eigenschaften der Materialien erörtert und in diesem Zusammenhang die Eignung als Photokatalysatoren für den oxidativen Abbau organischer Farbstoffe und für die photokatalytische Wasserreduktion bzw. –oxidation untersucht. Zusätzlich wird gezeigt, wie im System LiCl/KCl in einem einstufigen Prozess edelmetallfreie Kohlenstoffnitrid Komposite zur photokatalytischen Wasserreduktion hergestellt werden können.