Refine
Has Fulltext
- no (105) (remove)
Year of publication
- 2009 (105) (remove)
Document Type
- Article (99)
- Doctoral Thesis (4)
- Monograph/Edited Volume (2)
Is part of the Bibliography
- yes (105)
Institute
- Institut für Geowissenschaften (105) (remove)
We present observations from a continuous exposure of an ancient plate interface in the depth range of its former seismogenic zone in the central Alps of Europe related to Late Cretaceous-early Tertiary subduction and accretion of the South Penninic lower plate underneath the Adriatic upper plate. The material forming the exposed plate interface zone has experienced flow and fracturing over an extended period of time followed by syncollisional exhumation, thus reflecting a multistage evolution. Fabric formation and metamorphism, however, chiefly record the deformation conditions of the precollisional setting along the plate interface. We identify an unstable slip domain from pseudotachylytes occurring in the temperature range between 200 and 300 degrees C. This zone coincides with a domain of intense veining in the subduction melange with mineral growth into open cavities, indicating fast, possibly seismic, rupture. Evidence for transient near-lithostatic fluid pressure as well as brittle fractures competing with mylonitic shear zones continues into the region below the occurrence of pseudotachylytes, possibly reflecting a zone of conditionally stable slip. The zone above the unstable slip area is devoid of veins but displays ample evidence of fluid-assisted processes similar to the deeper zone: solution-precipitation creep and dehydration reactions in the melange matrix, hydration, and sealing of the base of the upper plate. Seismic rupture here is possibly expressed by ubiquitous localized deformation zones. We hypothesize that trenchward sealing of parts of the plate interface as well as reaction-enhanced destruction of upper plate permeability is an important component, localizing the unstable slip zone. This relation may result from the competition of the pervasive, presumably interseismic, pressure solution creep destroying permeability and building elevated fluid pressure until the strength threshold is reached with seismic failure.
Accretionary orogens are considered major sites of formation of juvenile continental crust. In the central and southern Andes this is contradicted by two observations: siliciclastic fills of Paleozoic basins in the central Andean segment of the accretionary Terra Australis Orogen consist almost exclusively of shales and mature sandstones; and magmatic rocks connected to the Famatinian (Ordovician) and Late Paleozoic magmatic arcs are predominantly felsic and characterized by significant crustal contamination and strongly unradiogenic Nd isotope compositions. Evidence of juvenile crustal additions is scarce. We present laser ablation (LA)-ICPMS U-Pb ages and LA-MC-ICPMS Hf isotope data of detrital zircons from seven Devonian to Permian turbidite sandstones incorporated into a Late Paleozoic accretionary wedge at the western margin of Gondwana in northern Chile. The combination with Nd whole-rock isotope data permits us to trace the evolution of the South American continental crust through several Proterozoic and Paleozoic orogenic cycles. The analyzed detrital zircon spectra reflect all Proterozoic orogenic cycles representing the step-wise evolution of the accretionary SW Amazonia Orogenic System between 2.0 and 0.9 Ga, followed by the Terra Australis Orogen between 0.9 and 0.25 Ga. The zircon populations are characterized by two prominent maxima reflecting input from Sunsas (Grenville) age magmatic rocks (1.2-0.9 Ga) and from the Ordovician to Silurian Famatinian magmatic arc (0.52-0.42 Ga). Grains of Devonian age are scarce or absent from the analyzed zircon populations. The Hf isotopic compositions of selected dated zircons at the time of their crystallization (epsilon Hf-(T); T = 3.3-0.25 Ga) vary between -18 and +11. All sandstones have a significant juvenile component; between 20 and 50% of the zircons from each sedimentary rock have positive epsilon Hf-(T) and can be considered juvenile. The majority of the juvenile grains have Hf-depleted mantle model ages (Hf T-DM) between 1.55 and 0.8 Ga. the time of the Rondonia-San Ignacio and Sunsas orogenic events on the Amazonia craton. The corresponding whole-rock epsilon Nd-(T) values fot these same rocks are between -8 and -3 indicating a mixture of older evolved and juvenile sources. Nd-depleted mantle model ages (Nd T-DM*) are between 1.5 and 1.2 Ga and coincide broadly with the zircon Hf model ages. Our data indicate that the Paleo- and Mesoproterozoic SW Amazonia Orogenic System, and the subsequent Neoproterozoic and Paleozoic Terra Australis Orogen in the region of the central and southern Andes, developed following two markedly different patterns of accretionary orogenic crustal evolution. The SW Amazonia Orogenic System developed by southwestward growth over approximately 1.1 Ga through a combination of accretion of juvenile material and crustal recycling typical of the extensional or retreating mode of accretionary orogens. In contrast, the central Andean segment of the Terra Australis Orogen evolved from 0.9 to 0.25 Ga in the compressional or advancing mode in a relatively fixed position without the accretion of oceanic crustal units or large scale input of juvenile material to the orogenic crust. Here, recycling mainly of Mesoproterozoic continental crust has been the dominant process of crustal evolution. (C) 2009 Elsevier B.V. All rights reserved.
The Younger Dryas event, which began approximately 12,900 years ago, was a period of rapid cooling in the Northern Hemisphere, driven by large-scale reorganizations of patterns of atmospheric and oceanic circulation(1-3). Environmental changes during this period have been documented by both proxy-based reconstructions(3) and model simulations(4), but there is currently no consensus on the exact mechanisms of onset, stabilization or termination of the Younger Dryas(5-8). Here we present high-resolution records from two sediment cores obtained from Lake Krakenes in western Norway and the Nordic seas. Multiple proxies from Lake Krakenes are indicative of rapid alternations between glacial growth and melting during the later Younger Dryas. Meanwhile, reconstructed sea surface temperature and salinity from the Nordic seas show an alternation between sea-ice cover and the influx of warm, salty North Atlantic waters. We suggest that the influx of warm water enabled the westerly wind systems to drift northward, closer to their present-day positions. The winds thus brought relatively warm maritime air to Northern Europe, resulting in rising temperatures and the melting of glaciers. Subsequent input of this fresh meltwater into the ocean spurred the formation of sea ice, which forced the westerly winds back to the south, cooling Northern Europe. We conclude that rapid alternations between these two states immediately preceded the termination of the Younger Dryas and the permanent transition to an interglacial state.
There are far-reaching conceptual similarities between bi-static surface georadar and post-stack, "zero-offset" seismic reflection data, which is expressed in largely identical processing flows. One important difference is, however, that standard deconvolution algorithms routinely used to enhance the vertical resolution of seismic data are notoriously problematic or even detrimental to the overall signal quality when applied to surface georadar data. We have explored various options for alleviating this problem and have tested them on a geologically well-constrained surface georadar dataset. Standard stochastic and direct deterministic deconvolution approaches proved to be largely unsatisfactory. While least-squares-type deterministic deconvolution showed some promise, the inherent uncertainties involved in estimating the source wavelet introduced some artificial "ringiness". In contrast, we found spectral balancing approaches to be effective, practical and robust means for enhancing the vertical resolution of surface georadar data, particularly, but not exclusively, in the uppermost part of the georadar section, which is notoriously plagued by the interference of the direct air- and groundwaves. For the data considered in this study, it can be argued that band- limited spectral blueing may provide somewhat better results than standard band-limited spectral whitening, particularly in the uppermost part of the section affected by the interference of the air- and groundwaves. Interestingly, this finding is consistent with the fact that the amplitude spectrum resulting from least-squares-type deterministic deconvolution is characterized by a systematic enhancement of higher frequencies at the expense of lower frequencies and hence is blue rather than white. It is also consistent with increasing evidence that spectral "blueness" is a seemingly universal, albeit enigmatic, property of the distribution of reflection coefficients in the Earth. Our results therefore indicate that spectral balancing techniques in general and spectral blueing in particular represent simple, yet effective means of enhancing the vertical resolution of surface georadar data and, in many cases, could turn out to be a preferable alternative to standard deconvolution approaches.
The rhodolithic slope deposits of a Burdigalian carbonate platform in Sardinia near Sedini were analyzed to reconstruct facies and palaeobathymetry. There is a distinct red-algal growth zonation along the platform slope. The clinoform rollover area consists of coralline-algal bindstones, which downslope change into a zone where rhodoliths are locally fused by progressive encrustation. Mid-slope rhodoliths are moderately branched, and downslope rhodoliths have fruticose protuberances, resulting in branching rhodolith growth patterns. There is a sharp change from the rhodolitic rudstones to the basinal, bivalve-dominated rudstones at the clinoform bottomsets. Red-algal genera identified include Sporolithon, Lithophyllum, Spongites, Hydrolithon, Mesophyllum, Lithoporella, Neogoniolithon, and other mastophoroids and melobesioids. Genera and subfamilies show a zonation along the clinoforms, allowing palaeobathymetric estimates. The clinoform rollovers formed at a water depth of around 40 m and the bottomsets around 60 m. Results from geometrical reconstruction show that coral reefs in the inner platform formed at water depths of around 20 m. Therefore, the Sedini carbonate platform is an example of a reef-bearing platform in which the edge or the platform-interior reefs do not build up to sea level.
Tectonic and climatic control on evolution of rift lakes in the Central Kenya Rift, East Africa
(2009)
The long-term histories of the neighboring Nakuru-Elmenteita and Naivasha lake basins in the Central Kenya Rift illustrate the relative importance of tectonic versus climatic effects on rift-lake evolution and the formation of disparate sedimentary environments. Although modem climate conditions in the Central Kenya Rift are very similar for these basins, hydrology and hydrochemistry of present-day lakes Nakuru, Elmenteita and Naivasha contrast dramatically due to tectonically controlled differences in basin geometries, catchment size, and fluvial processes. In this study, we use eighteen C-14 and Ar-40/Ar-39 dated fluvio-lacustrine sedimentary sections to unravel the spatiotemporal evolution of the lake basins in response to tectonic and climatic influences. We reconstruct paleoclimatic and ecological trends recorded in these basins based on fossil diatom assemblages and geologic field mapping. Our study shows a tendency towards increasing alkalinity and shrinkage of water bodies in both lake basins during the last million years. Ongoing volcano-tectonic segmentation of the lake basins, as well as reorganization of upstream drainage networks have led to contrasting hydrologic regimes with adjacent alkaline and freshwater conditions. During extreme wet periods in the past, such as during the early Holocene climate optimum, lake levels were high and all basins evolved toward freshwater systems. During drier periods some of these lakes revert back to alkaline conditions, while others maintain freshwater characteristics. Our results have important implications for the use and interpretation of lake sediment as climate archives in tectonically active regions and emphasize the need to deconvolve lacustrine records with respect to tectonics versus climatic forcing mechanisms.
In this work, we analyse continuous measurements of microseisms to assess the reliability of the fundamental resonance frequency estimated by means of the horizontal-to-vertical (H/V) spectral ratio within the 0.1-1 Hz frequency range, using short-period sensors (natural period of 1 s). We apply the H/V technique to recordings of stations installed in two alluvial basins with different sedimentary cover thicknesses-the Lower Rhine Embayment (Germany) and the Gubbio Plain (Central Italy). The spectral ratios are estimated over the time-frequency domain, and we discuss the reliability of the results considering both the variability of the microseism activity and the amplitude of the instrumental noise. We show that microseisms measured by short period sensors allow the retrieval of fundamental resonance frequencies greater than about 0.1-0.2 Hz, with this lower frequency bound depending on the relative amplitude of the microseism signal and the self-noise of the instruments. In particular, we show an example where the considered short-period sensor is connected to instruments characterized by an instrumental noise level which allows detecting only fundamental frequencies greater than about 0.4 Hz. Since the frequency at which the peak of the H/V spectral ratio is biased depends upon the seismic signal-to-instrument noise ratio, the power spectral amplitude of instrumental self- noise should be always considered when interpreting the frequency of the peak as the fundamental resonance frequency of the investigated site.
Trace element concentrations in aqueous fluids in equilibrium with haplogranitic melt were determined in situ at elevated P-T conditions using hydrothermal diamond-anvil cells and synchrotron-radiation XRF microanalyses. Time- resolved analyses showed that the Rb and Sr concentrations in the fluids became constant in less than 2000 s at all temperatures (500 to 780 degrees C). Although fluid-melt equilibration was very rapid, the change in the concentration of both elements in the fluid with temperature was fairly small (a slight increase for Rb and a slight decrease for Sr). This permitted partitioning data for Rb and Sr between haplogranitic melt and H2O or NaCl+KCl+HCl aqueous solutions at 750 degrees C and 200 to 700 MPa to be obtained from EMP analyses of the quenched melt and the in situ SR-XRF analyses of the equilibrated fluid. The resulting D-Rb(f/m) and D-Sr(f/m) were 0.01 +/- 0.002 and 0.006 +/- 0.001 for water as starting fluid, and increased to 0.47 +/- 0.08 and 0.23 +/- 0.03 for 3.56 m (NaCl+KCl)+0.04 in HCl at pressures of 224 to 360 MPa. In the experiments with H2O as starting fluid, the partition coefficients increased with pressure, i.e. D- Rb(f/m) from 0.01 +/- 0.002 to 0.22 +/- 0.02 and D-Sr(f/m) from 0.006 0.001 to 0.02 +/- 0.005 with a change in pressure from 360 to 700 MPa. At pressures to 360 MPa, the Rb/Sr ratio in the fluid was found to be independent of the initial salt concentration (Rb/Sr = 1.45 +/- 0.6). This ratio increased to 7.89 +/- 1.95 at 700 MPa in experiments with chloride free fluids, which indicates different changes in the Rb and Sr speciation with pressure.
This paper analyses the effect of spatial resolution and distribution of model input data on the results of regional-scale land use scenarios using three different hydrological catchment models. A 25 m resolution data set of a mesoscale catchment and three land use scenarios are used. Data are systematically aggregated to resolutions up to 2 kill. Land use scenarios are spatially redistributed, both randomly and topography based. Using these data, water fluxes are calculated on a daily time step for a 16 year time period without further calibration. Simulation results are used to identify grid size, distribution and model dependent scenario effects. In the case of data aggregation, all applied models react sensitively to grid size. WASIM and TOPLATS simulate constant water balances for grid sizes from 50 m to 300-500 m, SWAT is more sensitive to input data aggregation, simulating constant water balances between 50 m and 200 m grid size. The calculation of scenario effects is less robust to data aggregation. The maximum acceptable grid size reduces to 200-300 m for TOPLATS and WASIM. In case of spatial distribution, SWAT and TOPLATS are slightly sensitive to a redistribution of land use (below 1.5% for water balance terms), whereas WASIM shows almost no reaction. Because the aggregation effects were stronger than the redistribution effects, it is concluded that spatial discretisation is more important than spatial distribution. As the aggregation effect was mainly associated with a change in land use fraction, it is concluded that accuracy of data sets is much more important than a high spatial resolution.
This paper introduces the project on 'Assessing the impact of land use change on hydrology by ensemble modeling (LUCHEM)' that aims at investigating the envelope of predictions on changes in hydrological fluxes due to land use change. As part of a series of four papers, this paper outlines the motivation and setup of LUCHEM, and presents a model intercomparison for the present-day simulation results. Such an intercomparison provides a valuable basis to investigate the effects of different model structures on model predictions and paves the ground for the analysis of the performance of multi-model ensembles and the reliability of the scenario predictions in companion papers. in this study, we applied a set of 10 lumped, semi-lumped and fully distributed hydrological models that have been previously used in land use change studies to the low mountainous Dill catchment. Germany. Substantial differences in model performance were observed with Nash-Sutcliffe efficiencies ranging from 0.53 to 0.92. Differences in model performance were attributed to (1) model input data, (2) model calibration and (3) the physical basis of the models. The models were applied with two sets of input data: an original and a homogenized data set. This homogenization of precipitation, temperature and leaf area index was performed to reduce the variation between the models. Homogenization improved the comparability of model simulations and resulted in a reduced average bias, although some variation in model data input remained. The effect of the physical differences between models on the long-term water balance was mainly attributed to differences in how models represent evapotranspiration. Semi-lumped and lumped conceptual models slightly outperformed the fully distributed and physically based models. This was attributed to the automatic model calibration typically used for this type of models. Overall, however, we conclude that there was no superior model if several measures of model performance are considered and that all models are suitable to participate in further multi-model ensemble set-ups and land use change scenario investigations.
The hydrological cycle is a dynamic system by its nature, but sometimes accelerated through anthropogenic activity. A "hydrological change" (i.e. a water cycle that is significantly changing over a longer period of time) can be very different in character, depending on the specific natural conditions and the underlying spatial and temporal scales. Such changes may affect the availability and quality of water as essential pre-requisites for human development and ecosystem stability. Hydrological extremes, such as floods and droughts, may also be affected, what is also vitally important, because of their profound economic and societal impacts. Anthropogenically induced hydrological change can be attributed to three main external causes: first, the Earth's climate is changing significantly and thus directly affecting the terrestrial hydro-systems via the exchange of energy and heat. The second major issue is the land cover and its management that has been modified fundamentally by conversion of land for agriculture, forestry, and other purposes such as industrialisation and urbanisation. Finally, water resources are being used more than ever for human development, especially for agriculture, industrial activities, and navigation. If the regional terrestrial hydrological cycle is changing and counter-measures are desirable, it is from a scientific perspective mandatory to understand the extent and nature of such changes, and, especially, to identify their possible anthropogenic origin. There are, however, fundamental gaps in our knowledge, in particular about the role of feedbacks between individual processes and compartments of the hydrological cycle or the relevance of the interactions with other sub-systems of our planet, such as the atmosphere or the vegetation. This paper mentions several examples of hydrological change and discusses their identification, interaction processes, and feedback mechanisms, along with modelling issues. The possibilities and limitations of modelling are demonstrated by means of two studies: one from the river-lake system on the Middle-Havel River and one from the catchment of the Wahnbach Reservoir. The applied model systems comprise a series of consecutively coupled individual models (so-called one-way-coupling). Model systems that are able reflect feedback effects (two-way- coupling) are still in the development stage. It became clear that the applied model systems were able to reproduce the observed dynamics of the hydrological cycle and of selected matter fluxes. However, one has to be aware that the simulated time periods and scenarios represent rather moderately transient conditions, what is the justification why the one-way-coupling seems to be applicable. Furthermore, it was shown that the modelling uncertainty is considerably large. Nevertheless, this uncertainty can be distinguished from effects of changed internal systems dynamics or from changed boundary conditions, what is a basis for the usability of such model systems for prognostic purposes.
We applied apatite U-Pb, fission track, and (U-Th)/He triple dating and white mica Ar-40/Ar-39 thermochronology to syntectonic sedimentary rocks from the central Andean Puna plateau in order to determine the source-area geochronology and source sedimentary basin thermal histories, and ultimately the timing of multiple tectonothermal events in the Central Andes. Apatite triple dating of samples from the Eocene Geste Formation in the Salar de Pastos Grandes basin shows late Precambrian-Devonian apatite U-Pb crystallization ages, Eocene apatite fission track (AFT), and Eocene-Miocene (U-Th)/He (ca. 8-47 Ma) cooling ages. Double dating of cobbles from equivalent strata in the Arizaro basin documents early Eocene (46.2 +/- 3.9 Ma) and Cretaceous (107.6 +/- 7.6, 109.5 +/- 7.7 Ma) AFT and Eocene-Oligocene (ca. 55-30 Ma) (U-Th)/He ages. Thermal modeling suggests relatively rapid cooling between ca. 80 and 50 Ma and reheating and subsequent diachronous basin exhumation between ca. 30 Ma and 5 Ma. The Ar-40/Ar-39 white mica ages from the same samples in the Salar de Pastos Grandes area are mainly 400-350 Ma, younger than apatite U-Pb ages, suggesting source- terrane cooling and exhumation during the Devonian-early Carboniferous. Together these data reveal multiple phases of mountain building in the Paleozoic and Cenozoic. Basin burial temperatures within the plateau were limited to <80 degrees C and incision occurred diachronously during the Cenozoic.
The low-productivity South Pacific Gyre (SPG) is Earth's largest oceanic province. Its sediment accumulates extraordinarily slowly (0.1-1 m per million years). This sediment contains a living community that is characterized by very low biomass and very low metabolic activity. At every depth in cored SPG sediment, mean cell abundances are 3 to 4 orders of magnitude lower than at the same depths in all previously explored subseafloor communities. The net rate of respiration by the subseafloor sedimentary community at each SPG site is 1 to 3 orders of magnitude lower than the rates at previously explored sites. Because of the low respiration rates and the thinness of the sediment, interstitial waters are oxic throughout the sediment column in most of this region. Consequently, the sedimentary community of the SPG is predominantly aerobic, unlike previously explored subseafloor communities. Generation of H-2 by radiolysis of water is a significant electron-donor source for this community. The per-cell respiration rates of this community are about 2 orders of magnitude higher (in oxidation/reduction equivalents) than in previously explored anaerobic subseafloor communities. Respiration rates and cell concentrations in subseafloor sediment throughout almost half of the world ocean may approach those in SPG sediment.
Considering the increasing number and complexity of ground-motion prediction equations available for seismic hazard assessment, there is a definite need for an efficient, quantitative, and robust method to select and rank these models for a particular region of interest. In a recent article, Scherbaum et al. (2009) have suggested an information- theoretic approach for this purpose that overcomes several shortcomings of earlier attempts at using data-driven ground- motion prediction equation selection procedures. The results of their theoretical study provides evidence that in addition to observed response spectra, macroseismic intensity data might be useful for model selection and ranking. We present here an applicability study for this approach using response spectra and macroseismic intensities from eight Californian earthquakes. A total of 17 ground-motion prediction equations, from different regions, for response spectra, combined with the equation of Atkinson and Kaka (2007) for macroseismic intensities are tested for their relative performance. The resulting data-driven rankings show that the models that best estimate ground motion in California are, as one would expect, Californian and western U. S. models, while some European models also perform fairly well. Moreover, the model performance appears to be strongly dependent on both distance and frequency. The relative information of intensity versus response spectral data is also explored. The strong correlation we obtain between intensity-based rankings and spectral-based ones demonstrates the great potential of macroseismic intensities data for model selection in the context of seismic hazard assessment.
We present cross-hole P- and S-wave seismic experiments that have been performed along a similar to 100 m long transect for the detailed characterization of a contaminated sedimentary site (Bitterfeld research test site, Germany). We invert the corresponding first break arrival times for the P- and S-wave velocity structure and compare two different strategies to interpret these models in terms of pertinent lithological and geotechnical parameter variations. The first (common) approach is based on directly translating the tomographic velocity models into the parameters of interest (e.g., elastic moduli). The second (zonal) approach first reduces the tomographic parameter information to a limited number of characteristic velocity combinations via k-means cluster analysis. Then, for each zone (cluster) further parameters including uncertainties can be estimated. In the presented case study, Our results indicate that the zonal approach provides an effective means for the integrated interpretation of different co-located data.
The aim of this paper is to characterize the spatio-temporal distribution of Central-Europe seismicity. Specifically, by using a non-parametric statistical approach, the proportional hazard model, leading to an empirical estimation of the hazard function, we provide some constrains on the time behavior of earthquake generation mechanisms. The results indicate that the most conspicuous characteristics of M-w 4.0+ earthquakes is a temporal clustering lasting a couple of years. This suggests that the probability of occurrence increases immediately after a previous event. After a few years, the process becomes almost time independent. Furthermore, we investigate the cluster properties of the seismicity of Central-Europe, by comparing the obtained result with the one of synthetic catalogs generated by the epidemic type aftershock sequences (ETAS) model, which previously have been successfully applied for short term clustering. Our results indicate that the ETAS is not well suited to describe the seismicity as a whole, while it is able to capture the features of the short- term behaviour. Remarkably, similar results have been previously found for Italy using a higher magnitude threshold.
The Aue-Schwarzenberg Granite Zone (ASGZ), in the western Erzgebirge of Germany, is composed of small, late- Variscan F-poor biotite and two-mica granites. The biotite granites (Aue granite suite, Beierfeld, Bernsbach) are weakly to mildly peraluminous (A/CNK = 1.07-1.14; 70-76 wt% SiO2), display similar Sr-87/Sr-86 initial ratios (0.7065-0.7077; t = 325 Ma), and exhibit a narrow range in epsilon Nd-325 (-2.6 to -3.5). They are closely affiliated compositionally with the biotite granites in the distant, more voluminous Nejdek massif (Czech Republic). The two-mica granites (Schwarzenberg granite suite, Lauter) are Si-rich (74-77 wt% SiO2) and mildly to strongly peraluminous (A/CNK = 1.17- 1.26). The granites from Schwarzenberg Lire distinctly higher in their Sr(i)ratios (0.709-0.713; t = 325 Ma) and possess lower values of epsilon Nd-325 (-4.9 to -5.2) relative to the biotite granites. The Lauter granites have a Nd-isotopic composition between -3.6 and -4.0 (t = 325 Ma). Mean Th-U-total Pb uraninite ages (Ma +/- 2 sigma) obtained for the granites from the Aue Suite (324.3 +/- 3. 1), Beierfeld (323.7 +/- 3.1), Bernsbach (320.7 +/- 2.9), Schwarzenberg (323.3 +/- 2.4), and the Kirchberg granite al Burkersdorf (322.7 +/- 3.5) indicate that magmatism in the ASGZ commenced in the Namurian and took place early within the major episode of granite formation in the Erzgebirge-Vogtland zone (327-318 Ma). Geochemical and mineralogical patterns of variably altered samples imply that the ASGZ granites are unlikely to have significantly contributed to the formation of spatially associated metalliferous ore deposits (Sn, W, Mo, Ph, Zn, Bi, Co, Ni), except for uranium. In particular the Aue granite suite should have served as major Source for U accumulated in the economically important post-granitic deposits of Schneeberg and Schlema-Alberoda.