Refine
Year of publication
Document Type
- Article (53)
- Postprint (3)
- Doctoral Thesis (1)
- Other (1)
Is part of the Bibliography
- yes (58)
Keywords
- CU (2)
- DFT (2)
- EXAFS (2)
- MO (2)
- Paris-Edinburgh press (2)
- SIO₂ (2)
- X-ray absorption (2)
- complexes (2)
- crystalline (2)
- glass (2)
A confocal set-up is presented that improves micro-XRF and XAFS experiment with high-pressure e diamond-anvil cells (DACs) In this experiment a probing volume is defined by the focus of the incoming synchrotron radiation beam and that of a polycapillary X-ray half-lens with a very long working distance, which is placed in front of the fluorescence detector This set-up enhances the quality of the fluorescence and XAFS spectra, and thus the sensitivity for detecting elements at low concentrations. It efficiently suppresses signal from outside the sample chamber, which stems from elastic and inelastic scattering of the incoming beam by the diamond anvils as well as from excitation of fluorescence from the body of the DAC
We present a new autoclave that enables in situ characterization of hydrothermal fluids at high pressures and high temperatures at synchrotron x-ray radiation sources. The autoclave has been specifically designed to enable x-ray absorption spectroscopy in fluids with applications to mineral solubility and element speciation analysis in hydrothermal fluids in complex compositions. However, other applications, such as Raman spectroscopy, in high-pressure fluids are also possible with the autoclave. First experiments were run at pressures between 100 and 600 bars and at temperatures between 25 degrees C and 550 degrees C, and preliminary results on scheelite dissolution in fluids of different compositions show that the autoclave is well suited to study the behavior of ore-forming metals at P-T conditions relevant to the Earth's crust.
Sulfur is an important component in volcanic gases at the Earth surface but also present in the deep Earth in hydrothermal or magmatic fluids. Little is known about the evolution of such fluids during ascent in the crust. A new optical cell was developed for in situ Raman spectroscopic investigations on fluids allowing abrupt or continuous changes of pressure up to 200 MPa at temperatures up to 750 degrees C. The concept is based on a flexible gold bellow, which separates the sample fluid from the pressure medium water. To avoid reactions between aggressive fluids and the pressure cell, steel components in contact with the fluid are shielded by gold foil. The cell was tested to study redox reactions in fluids using aqueous ammonium sulfate solutions as a model system. During heating at constant pressure of 130 MPa, sulfate ions transform first to HSO4- ions and then to molecular units such as H2SO4. Variation of pressure shows that the stability of sulfate species relies on fluid density, i.e., highly charged species are stable only in high-density fluids. Partial decomposition of ammonium was evident above 550 degrees C by the occurrence of a nitrogen peak in the Raman spectra. Reduced sulfur species were observed above 700 degrees C by Raman signals near 2590 cm(-1) assigned to HS- and H2S. No clear evidence for the formation of sulfur dioxide was found in contrary to previous studies on aqueous H2SO4, suggesting very reducing conditions in our experiments. Fluid-mineral interaction was studied by inserting into the cell a small, semi-open capsule filled with a mixture of pyrite and pyrrhotite. Oxidation of the sample assembly was evident by transformation of pyrite to pyrrhotite. As a consequence, sulfide species were observed in the fluid already at temperatures of similar to 600 degrees C.
In this study transmission X-ray microscopy (TXM) was tested as a method to investigate the chemistry and structure of corroded silicate glasses at the nanometer scale. Three different silicate glasses were altered in static corrosion experiments for 1-336 hours at temperatures between 60 degrees C and 85 degrees C using a 25% HCl solution. Thin lamellas were cut perpendicular to the surface of corroded glass monoliths and were analysed with conventional TEM as well as with TXM. By recording optical density profiles at photon energies around the Na and O K-edges, the shape of the corrosion rim/pristine glass interfaces and the thickness of the corrosion rims has been determined. Na and O near-edge X-ray absorption fine-structure spectra (NEXAFS) were obtained without inducing irradiation damage and have been used to detect chemical changes in the corrosion rims. Spatially resolved NEXAFS spectra at the O K-edge provided insight to structural changes in the corrosion layer on the atomic scale. By comparison to O K-edge spectra of silicate minerals and (hydrous) albite glass as well as to O K-edge NEXAFS of model structures simulated with ab initio calculations, evidence is provided that changes of the fine structure at the O K-edge are assigned to the formation of siloxane groups in the corrosion rim.
Amides as thermo-sensitive tracers for investigating the thermal state of geothermal reservoirs
(2016)
The application of thermo-sensitive tracers is a promising technique for evaluating the thermal state of geothermal reservoirs. To extend the compound spectrum for hydrolyzable compounds to reservoir temperatures between 100 and 200 degrees C carboxamides were studied. The kinetic parameters of 17 self-synthesized amides were determined in hydrothermal batch and autoclave experiments. The influence of the molecular structure and the role of pH/pOH on hydrolysis kinetics were studied. Additionally, the thermal stabilities of the hydrolysis products were evaluated. The results demonstrate the high potential of tracers based on amide hydrolysis for use in medium enthalpy reservoirs. (C) 2016 Elsevier Ltd. All rights reserved.
We present a study of the local atomic environment of the oxygen atoms in the aqueous solutions of NaOH and HCl under simultaneous high-temperature and high-pressure conditions. Experimental nonresonant X-ray Raman scattering core-level spectra at the oxygen K-edge show systematic changes as a function of temperature and pressure. These systematic changes are distinct for the two different solutes and are described well by calculations within the Bethe- Salpeter formalism for snapshots from ab initio molecular dynamics simulations. The agreement between experimental and simulation results allows us to use the computations for a detailed fingerprinting analysis in an effort to elucidate the local atomic structure and hydrogen-bonding topology in these relevant solutions. We observe that both electrolytes, especially NaOH, enhance hydrogen bonding and tetrahedrality in the water structure at supercritical conditions, in particular in the vicinity of the hydration shells. This effect is accompanied with the association of the HCl and NaOH molecules at elevated temperatures.
A confocal set-up for three-dimensional (3D) micro X-ray fluorescence (micro-XRF) was used at the mySpot beamline at BESSY II, which allows compositional depth profiling for various applications. We present results obtained with a confocal 3D micro-XRF set-up for chemical age dating using the U, Th and Pb concentrations of monazite within rock thin sections. The probing volume was determined to be approximately 21 x 21 x 24 mu m(3) for W-L alpha using an excitation energy of 19 keV. The relative detection limits particularly for Pb are below 10 ppm (for Counting times
X-ray emission and X-ray Raman scattering spectroscopy are powerful tools to investigate the local electronic and atomic structure of high and low Z elements in situ. Notably, these methods can be applied for in situ spectroscopy at high pressure and high temperature using resistively or laser-heated diamond anvil cells in order to achieve thermodynamic conditions which appear in the Earth's interior. We present a setup for combined X-ray emission and X-ray Raman scattering studies at beamline P01 of PETRA III using a portable wavelength-dispersive von Hamos spectrometer together with the permanently installed multiple-analyzer Johann-type spectrometer. The capabilities of this setup are exemplified by investigating the iron spin crossover of siderite FeCO3 up to 49.3 GPa by measuring the Fe M2,3-edge and the Fe Kβ1,3 emission line simultaneously. With this setup, the Fe valence-to-core emission can be detected together with the Kβ1,3 emission line providing complementary information on the sample's electronic structure. By implementing a laser-heating device, we demonstrate the strength of using a von Hamos type spectrometer for spin state mapping at extreme conditions. Finally, we give different examples of low Z elements' absorption edges relevant for application in geoscience that are accessible with the Johann-type XRS spectrometer. With this setup new insights into the spin transition and compression mechanisms of Earth's mantle materials can be obtained of importance for comprehension of the macroscopic physical and chemical properties of the Earth's interior.
Kim et al. recently measured the structure factor of deeply supercooled water droplets (Reports, 22 December 2017, p. 1589). We raise several concerns about their data analysis and interpretation. In our opinion, the reported data do not lead to clear conclusions about the origins of water’s anomalies.
Water keeps puzzling scientists because of its numerous properties which behave oppositely to those of usual liquids: for instance, water expands upon cooling, and liquid water is denser than ice. To explain this anomalous behavior, several theories have been proposed, with different predictions for the properties of supercooled water (liquid at conditions where ice is stable). However, discriminating between those theories with experiments has remained elusive because of spontaneous ice nucleation. Here we measure the sound velocity in liquid water stretched to negative pressure and derive an experimental equation of state, which reveals compressibility anomalies. We show by rigorous thermodynamic relations how these anomalies are intricately linked with the density anomaly. Some features we observe are necessary conditions for the validity of two theories of water.
The metastable paragenesis of corundum and quartz is rare in nature but common in laboratory experiments where according to thermodynamic predictions aluminum-silicate polymorphs should form. We demonstrate here that the existence of a hydrous, silicon-bearing, nanometer-thick layer (called "HSNL") on the corundum surface can explain this metastability in experimental studies without invoking unspecific kinetic inhibition. We investigated experimentally formed corundum reaction products synthesized during hydrothermal and piston-cylinder experiments at 500-800 degrees C and 0.25-1.8 GPa and found that this HSNL formed inside and on the corundum crystals, thereby controlling the growth behavior of its host. The HSNL represents a substitution of Al with Si and H along the basal plane of corundum. Along the interface of corundum and quartz, the HSNL effectively isolates the bulk phases corundum and quartz from each other, thus apparently preventing their reaction to the stable aluminum silicate. High temperatures and prolonged experimental duration lead to recrystallization of corundum including the HSNL and to the formation of quartz + fluid inclusions inside the host crystal. This process reduces the phase boundary area between the bulk phases, thereby providing further opportunity to expand their coexistence. In addition to its small size, its transient nature makes it difficult to detect the HSNL in experiments and even more so in natural samples. Our findings emphasize the potential impact of nanometer-sized phases on geochemical reaction pathways and kinetics under metamorphic conditions in one of the most important chemical systems of the Earth's crust.
Fe K-edge X-ray absorption near edge structure (XANES) and Mossbauer spectra were collected on synthetic glasses of basaltic composition and of glasses on the sodium oxide-silica binary to establish a relation between the pre- edge of the XANES at the K-edge and the Fe oxidation state of depolymerised glasses. Charges of sample material were equilibrated at ambient pressure, superliquidus temperatures and oxygen fugacities that were varied over a range of about 15 orders of magnitude. Most experiments were carried out in gas-flow furnaces, either with pure oxygen, air, or different CO/CO2 mixtures. For the most reduced conditions, the samples charges were enclosed together with a pellet of the IQF oxygen buffer in an evacuated silica glass ampoule. Fe3+/Sigma Fe x 100 of the samples determined by Mossbauer spectroscopy range between 0% and 100%. Position and intensity of the pre-edge centroid position vary strongly depending on the Fe oxidation state. The pre-edge centroid position and the Fe oxidation state determined by Mossbauer spectroscopy are nonlinearly related and have been fitted by a quadratic polynomial. Alternatively, the ratio of intensities measured at positions sensitive to Fe2+ and Fe3+, respectively, provides an even more sensitive method. Pre- edge intensities of the sample suite indicate average Fe co-ordination between 4 and 6 for all samples regardless of oxidation state. A potential application of the calibration given here opens the possibility of determining Fe oxidation state in glasses of similar compositions with high spatial resolution by use of a Micro-XANES setup (e.g., glass inclusions in natural minerals). (c) 2004 Elsevier B.V. All rights reserved
Fe K-edge X-ray absorption near edge structure (XANES) and Mossbauer spectra were collected on synthetic glasses of basaltic composition and of glasses on the sodium oxide-silica binary to establish a relation between the pre- edge of the XANES at the K-edge and the Fe oxidation state of depolymerised glasses. Charges of sample material were equilibrated at ambient pressure, superliquidus temperatures and oxygen fugacities that were varied over a range of about 15 orders of magnitude. Most experiments were carried out in gas-flow furnaces, either with pure oxygen, air, or different CO/CO2 mixtures. For the most reduced conditions, the samples charges were enclosed together with a pellet of the IQF oxygen buffer in an evacuated silica glass ampoule. Fe3+/SigmaFe x 100 of the samples determined by Mossbauer spectroscopy range between 0% and 100%. Position and intensity of the pre-edge centroid position vary strongly depending on the Fe oxidation state. The pre-edge centroid position and the Fe oxidation state determined by Mossbauer spectroscopy are nonlinearly related and have been fitted by a quadratic polynomial. Alternatively, the ratio of intensities measured at positions sensitive to Fe2+ and Fe3+, respectively, provides an even more sensitive method. Pre- edge intensities of the sample suite indicate average Fe co-ordination between 4 and 6 for all samples regardless of oxidation state. A potential application of the calibration given here opens the possibility of determining Fe oxidation state in glasses of similar compositions with high spatial resolution by use of a Micro-XANES setup (e.g., glass inclusions in natural minerals). (C) 2004 Elsevier B.V. All rights reserved
Determination of the iron oxidation state in Earth materials using XANES pre-edge information
(2001)
We present a combination of first-principles and experimental results regarding the structural and magnetic properties of olivine-type LiFePO4 under pressure. Our investigations indicate that the starting Pbnm phase of LiFePO4 persists up to 70 GPa. Further compression leads to an isostructural transition in the pressure range of 70-75 GPa, inconsistent with a former theoretical study. Considering our first-principles prediction for a high-spin to low-spin transition of Fe2+ close to 72 GPa, we attribute the experimentally observed isostructural transition to a change in the spin state of Fe2+ in LiFePO4. Compared to relevant Fe-bearing minerals, LiFePO4 exhibits the largest onset pressure for a pressure-induced spin state transition.
The crystallization kinetics of silicate liquids were studied experimentally in the system haplogranite-B-Li-H2O, at variable degrees of undercooling and variable water concentration. We investigated the kinetics of nucleation and crystallization of unseeded synthetic hydrous haplogranite with 1 wt % Li2O + 2 center dot 3 wt % B2O3 added (composition C1) and 2 wt % Li2O + 4 center dot 6 wt % B2O3 added (composition C2). Compositions C1 and C2 are simplified representative bulk compositions of Li-rich pegmatites and their highly differentiated cores, respectively. Starting water contents varied between 3 and 9 wt %. With few exceptions, the system remained water-undersaturated. About 86 isothermal runs of 1-60 days duration, grouped in 25 time series of constant temperature and initial H2O content, were carried out at temperatures from 400 to 700A degrees C at 300 MPa, corresponding to variable degrees of undercooling between the liquidus and glass transition. Viscosity measurements indicate that the glass transition for both compositions is below 400A degrees C for 3 wt % water and below 300A degrees C for 6 center dot 5 wt % water. The melts remained virtually crystal free at 400A degrees C, about 100A degrees C and 120A degrees C above the glass transition for compositions C1 and C2, respectively, in experiments up to 30 days long. This result is consistent with the existence of low-temperature, undercooled melts in the crust. At lower values of undercooling the runs crystallized partially, up to about 70% volume fraction. Undercooling and the amount of water are the main factors controlling nucleation and growth rates, and therefore textures. Minerals nucleate and grow sequentially according to mineral-specific nucleation delays. The mineral assemblage started with Li-Al stuffed quartz (in C1) and virgilite (in C2), solid-solutions between quartz and gamma-spodumene. The quartz-like phases were typically followed by spherulitic alkali feldspar-quartz intergrowths, euhedral petalite, and fine-grained muscovite. Nearly pure quartz formed as rims and replacement of metastable virgilite and stuffed quartz, in particular at the boron- and water-rich crystallization front of large feldspar or petalite. With the exception of muscovite, all minerals nucleated heterogeneously, on the capsule wall or on pre-existing minerals, and grew inwards, towards the capsule center. Experimental textures resembled the textures of zoned pegmatites, including skeletal, graphic, unidirectional, radiating, spherulitic, massive, and replacement textures. In some cases, when fluid saturation was reached, miarolitic cavities developed containing euhedral crystals. Although unidirectional growth rates appeared to slow down in time, volumetric rates for stable graphic alkali-feldspar quartz intergrowths and petalite remained constant for up to 60 days and similar to 70% crystallization. Metastable stuffed quartz and virgilite diminished in their growth rates in runs of 30 days or longer, were resorbed in the melt, and were partially replaced by second-generation quartz. Unobstructed, self-sustained crystal growth in conditions of very low nucleation density appears to be the dominant mechanism to form giant pegmatitic crystals, although experimental growth rates are much slower than predicted in nature based on conductive-cooling models.
We studied FeCO3 using Fe K-edge X-ray absorption near-edge structure (XANES) spectroscopy at pressures up to 54 GPa and temperatures above 2000 K. First-principles calculations of Fe at the K-edge in FeCO3 were performed to support the interpretation of the XANES spectra. The variation of iron absorption edge features with pressure and temperature in FeCO3 matches well with recently reported observations on FeCO3 at extreme conditions, and provides new insight into the stability of Fe-carbonates in Earth's mantle. Here we show that at conditions of the mid-lower mantle, ~50 GPa and ~2200 K, FeCO3 melts and partially decomposes to high-pressure Fe3O4. Carbon (diamond) and oxygen are also inferred products of the reaction. We constrained the thermodynamic phase boundary between crystalline FeCO3 and melt to be at 51(1) GPa and ~1850 K. We observe that at 54(1) GPa, temperature-induced spin crossover of Fe2+ takes place from low to high spin such that at 1735(100) K, all iron in FeCO3 is in the high-spin state. A comparison between experiment and theory provides a more detailed understanding of FeCO3 decomposition observed in X-ray absorption spectra and helps to explain spectral changes due to pressure-induced spin crossover in FeCO3 at ambient temperature.
We present new experimental data of the low-temperature metastable region of liquid water derived from high-density synthetic fluid inclusions (996-916 kg m(-3)) in quartz. Microthermometric measurements include: (i) prograde (upon heating) and retrograde (upon cooling) liquid-vapour homogenisation. We used single ultrashort laser pulses to stimulate vapour bubble nucleation in initially monophase liquid inclusions. Water densities were calculated based on prograde homogenisation temperatures using the IAPWS-95 formulation. We found retrograde liquid-vapour homogenisation temperatures in excellent agreement with IAPWS-95. (ii) Retrograde ice nucleation. Raman spectroscopy was used to determine the nucleation of ice in the absence of the vapour bubble. Our ice nucleation data in the doubly metastable region are inconsistent with the low-temperature trend of the spinodal predicted by IAPWS-95, as liquid water with a density of 921 kg m(-3) remains in a homogeneous state during cooling down to a temperature of -30.5 degrees C, where it is transformed into ice whose density corresponds to zero pressure. (iii) Ice melting. Ice melting temperatures of up to 6.8 degrees C were measured in the absence of the vapour bubble, i.e. in the negative pressure region. (iv) Spontaneous retrograde and, for the first time, prograde vapour bubble nucleation. Prograde bubble nucleation occurred upon heating at temperatures above ice melting. The occurrence of prograde and retrograde vapour bubble nucleation in the same inclusions indicates a maximum of the bubble nucleation curve in the R-T plane at around 40 degrees C. The new experimental data represent valuable benchmarks to evaluate and further improve theoretical models describing the p-V-T properties of metastable water in the low-temperature region.