Refine
Year of publication
- 2010 (90) (remove)
Document Type
- Article (66)
- Doctoral Thesis (21)
- Other (2)
- Monograph/Edited Volume (1)
Keywords
- Arrayseismologie (2)
- Cosmogenic nuclides (2)
- Erdbeben (2)
- Erdbebenkatalog (2)
- Erdbebenschwarm 2008/09 (2)
- InSAR (2)
- Kosmogene Nuklide (2)
- Standorteffekte (2)
- Vogtland/West Bohemia (2)
- Vogtland/Westböhmen (2)
Institute
- Institut für Geowissenschaften (90) (remove)
The subsurface harbors a large fraction of Earth's living biomass, forming complex microbial ecosystems. Without a profound knowledge of the ongoing biologically mediated processes and their reaction to anthropogenic changes it is difficult to assess the long-term stability and feasibility of any type of geotechnical utilization, as these influence subsurface ecosystems. Despite recent advances in many areas of subsurface microbiology, the direct quantification of turnover processes is still in its infancy, mainly due to the extremely low cell abundances. We provide an overview of the currently available techniques for the quantification of microbial turnover processes and discuss their specific strengths and limitations. Most techniques employed so far have focused on specific processes, e.g. sulfate reduction or methanogenesis. Recent studies show that processes that were previously thought to exclude each other can occur simultaneously, albeit at very low rates. Without the identification of the respective processes it is impossible to quantify total microbial activity. Even in cases where all simultaneously occurring processes can be identified, the typically very low rates prevent quantification. In many cases a simple measure of total microbial activity would be a better and more robust measure than assays for several specific processes. Enzyme or molecular assays provide a more general approach as they target key metabolic compounds. Depending on the compound targeted a broader spectrum of microbial processes can be quantified. The two most promising compounds are ATP and hydrogenase, as both are ubiquitous in microbes. Technical constraints limit the applicability of currently available ATP-assays for subsurface samples. A recently developed hydrogenase radiotracer assay has the potential to become a key tool for the quantification of subsurface microbial activity.
Seismic wide-angle data were collected along a 40-km-long profile centered at the geothermal research well GrSk 3/90 in the Northeast German Basin. Tomographic inversion of travel time data provided a velocity and a vertical velocity gradient model, indicative of Cenozoic to Pre-Permian sediments. Wide-angle reflections are modeled and interpreted as top Zechstein and top Pre-Permian. Changes in velocity gradients are interpreted as the transition from mechanical to chemical compaction at 2-3 km depth, and localized salt structures are imaged, suggesting a previously unknown salt pillow in the southern part of the seismic profile. The Zechstein salt shows decreased velocities in the adjacent salt pillows compared to the salt lows, which is confirmed by sonic log data. This decrease in velocity could be explained by the mobilization of less dense salt, which moved and formed the salt pillows, whereas the denser salt remained in place at the salt lows. We interpret a narrow subvertical low-velocity zone under the salt pillow at GrSk 3/ 90 as a fault in the deep Permian to Pre-Permian. This WNW-ESE trending fault influenced the location of the salt tectonics and led to the formation of a fault-bounded graben in the Rotliegend sandstones with optimal mechanical conditions for geothermal production. Thermal modeling showed that salt pillows are related to chimney effects, a decrease in temperature, and increasing velocity. The assumed variations in salt lithology, density, and strain must thus be even higher to compensate for the temperature effect.
Earthquake rupture length and width estimates are in demand in many seismological applications. Earthquake magnitude estimates are often available, whereas the geometrical extensions of the rupture fault mostly are lacking. Therefore, scaling relations are needed to derive length and width from magnitude. Most frequently used are the relationships of Wells and Coppersmith (1994) derived on the basis of a large dataset including all slip types with the exception of thrust faulting events in subduction environments. However, there are many applications dealing with earthquakes in subduction zones because of their high seismic and tsunamigenic potential. There are no well-established scaling relations for moment magnitude and length/width for subduction events. Within this study, we compiled a large database of source parameter estimates of 283 earthquakes. All focal mechanisms are represented, but special focus is set on (large) subduction zone events, in particular. Scaling relations were fitted with linear least-square as well as orthogonal regression and analyzed regarding the difference between continental and subduction zone/oceanic relationships. Additionally, the effect of technical progress in earthquake parameter estimation on scaling relations was tested as well as the influence of different fault mechanisms. For a given moment magnitude we found shorter but wider rupture areas of thrust events compared to Wells and Coppersmith (1994). The thrust event relationships for pure continental and pure subduction zone rupture areas were found to be almost identical. The scaling relations differ significantly for slip types. The exclusion of events prior to 1964 when the worldwide standard seismic network was established resulted in a remarkable effect on strike-slip scaling relations: the data do not show any saturation of rupture width of strike- slip earthquakes. Generally, rupture area seems to scale with mean slip independent of magnitude. The aspect ratio L/W, however, depends on moment and differs for each slip type.
Three dimensional modelling of fractured and faulted reservoirs : framework and implementation
(2010)
Modelling of coupled physical processes in fractured and faulted media is a major challenge for the geoscience community. Due to the complexity related to the geometry of real fracture networks and fault systems, modelling studies have been mainly restricted either to two dimensional cases or to simplified orthogonal fracture systems consisting of vertical and horizontal fractures. An approach to generate three dimensional meshes for realistic fault geometries is presented. The method enables representation of faults in an arbitrary incline as two dimensional planes within a three dimensional, stratified porous matrix of a generic geometry. Based on a structural geological model, the method creates three dimensional unstructured tetrahedral meshes. These meshes can be used for finite element and finite volume numerical simulations. A simulation of a coupled fluid flow and heat transport problem for a two layered porous medium cut by two crossing faults is presented to test the reliability of the method.
Three-dimensional (3D) ground-penetrating radar (GPR) represents an efficient high-resolution geophysical surveying method allowing to explore archaeological sites in a non-destructive manner. To effectively analyze large 3D GPR data sets, their combination with modern visualization techniques (e.g., 3D isoamplitude displays) has been acknowledged to facilitate interpretation beyond classical time-slice analysis. In this study, we focus on the application of data attributes (namely energy, coherency, and similarity), originally developed for petroleum reservoir related problems addressed by reflection seismology, to emphasize temporal and spatial variations within GPR data cubes. Based on two case studies, we illustrate the potential of such attribute based analyses towards a more comprehensive 3D GPR data interpretation. The main goal of both case studies was to localize and potentially characterize tombs inside medieval chapels situated in the state of Brandenburg, Germany. By comparing the calculated data attributes to the conventionally processed data cubes, we demonstrate the superior interpretability of the coherency and the similarity attribute for target identification and characterization.
We have collected magnetic, 3D ground-penetrating-radar (GPR), and topographic data at an archaeological site within the Palace Garden of Paretz, Germany. The survey site covers an area of approximately 35 x 40 m across a hill structure (dips of up to 15 degrees) that is partly covered by trees. The primary goal of this study was to detect and locate the remains of ancient architectural elements, which, from historical records, were expected to be buried in the subsurface at this site. To acquire our geophysical data, we used a recently developed surveying approach that combines the magnetic and GPR instrument with a tracking total station (TTS). Besides efficient data acquisition, this approach provides positional information at an accuracy within the centimeter range. At the Paretz field site, this information was critical for processing and analyzing our geophysical data (in particular, GPR data) and enabled us to generate a high-resolution digital terrain model (DTM) of the surveyed area. Integrated analysis and interpretation based on composite images of the magnetic, 3D GPR, and high-resolution DTM data as well as selected attributes derived from these data sets allowed us to outline the remains of an artificial grotto and temple. Our work illustrates the benefit of using multiple surveying technologies, analyzing and interpreting the resulting data in an integrated fashion. It further demonstrates how modern surveying solutions allow for efficient, accurate data acquisition even in difficult terrain.
In this paper, we present an efficient kinematic ground-penetrating radar (GPR) surveying setup using a self- tracking total station (TTS). This setup combines the ability of modern GPR systems to interface with Global Positioning System (GPS) and the capability of the employed TTS system to immediately make the positioning information available in a standardized GPS data format. Wireless communication between the GPR and the TTS system is established by using gain variable radio modems. Such a kinematic surveying setup faces two major potential limitations. First, possible crosstalk effects between the GPR and the positioning system have to be evaluated. Based on multiple walkaway experiments, we show that, for reasonable field setups, instrumental crosstalk has no significant impact on GPR data quality. Second, we investigate systematic latency (i.e., the time delay between the actual position measurement by TTS and its fusion with the GPR data) and its impact on the positional precision of kinematically acquired 2-D and 3-D GPR data. To quantify latency for our kinematic survey setup, we acquired forward-reverse profile pairs across a well-known subsurface target. Comparing the forward and reverse GPR images using three fidelity measures allows determining the optimum latency value and correcting for it. Accounting for both of these potential limitations allows us to kinematically acquire high- quality and high-precision GPR data using off-the-shelf instrumentation without further hardware modifications. Until now, these issues have not been investigated in detail, and thus, we believe that our findings have significant implications also for other geophysical surveying approaches.
The Antarctic plays an important role in the global climate system. On the one hand, the Antarctic Ice Sheet is the largest freshwater reservoir on Earth. On the other hand, a major proportion of the global bottom-water formation takes place in Antarctic shelf regions, forcing the global thermohaline circulation. The main goal of this dissertation is to provide new insights into the dynamics and stability of the EAIS during the Quaternary. Additionally, variations in the activity of bottom-water formation and their causes are investigated. The dissertation is a German contribution to the International Polar Year 2007/ 2008 and was funded by the ‘Deutsche Forschungsgesellschaft’ (DFG) within the scope of priority program 1158 ‘Antarctic research with comparative studies in Arctic ice regions’. During RV Polarstern expedition ANT-XXIII/9, glaciomarine sediments were recovered from the Prydz Bay-Kerguelen region. Prydz Bay is a key region for the study of East EAIS dynamics, as 16% of the EAIS are drained through the Lambert Glacier into the bay. Thereby, the glacier transports sediment into Prydz Bay which is then further distributed by calving icebergs or by current transport. The scientific approach of this dissertation is the reconstruction of past glaciomarine environments to infer on the response of the Lambert Glacier-Amery Ice Shelf system to climate shifts during the Quaternary. To characterize the depositional setting, sedimentological methods are used and statistical analyses are applied. Mineralogical and (bio)geochemical methods provide a means to reconstruct sediment provenances and to provide evidence on changes in the primary production in the surface water column. Age-depth models were constructed based on palaeomagnetic and palaeointensity measurements, diatom stratigraphy and radiocarbon dating. Sea-bed surface sediments in the investigation area show distinct variations in terms of their clay minerals and heavy-mineral assemblages. Considerable differences in the mineralogical composition of surface sediments are determined on the continental shelf. Clay minerals as well as heavy minerals provide useful parameters to differentiate between sediments which originated from erosion of crystalline rocks and sediments originating from Permo-Triassic deposits. Consequently, mineralogical parameters can be used to reconstruct the provenance of current-transported and ice-rafted material. The investigated sediment cores cover the time intervals of the last 1.4 Ma (continental slope) and the last 12.8 cal. ka BP (MacRobertson shelf). The sediment deposits were mainly influenced by glacial and oceanographic processes and further by biological activity (continental shelf), meltwater input and possibly gravitational transport. Sediments from the continental slope document two major deglacial events: the first deglaciation is associated with the mid-Pleistocene warming recognized around the Antarctic. In Prydz Bay, the Lambert Glacier-Amery Ice Shelf retreated far to the south and high biogenic productivity commenced or biogenic remains were better preserved due to increased sedimentation rates. Thereafter, stable glacial conditions continued until 400 - 500 ka BP. Calving of icebergs was restricted to the western part of the Lambert Glacier. The deeper bathymetry in this area allows for floating ice shelf even during times of decreased sea-level. Between 400 - 500 ka BP and the last interglacial (marine isotope stage 5) the glacier was more dynamic. During or shortly after the last interglacial the LAIS retreated again due to sea-level rise of 6 - 9 m. Both deglacial events correlate with a reduction in the thickness of ice masses in the Prince Charles Mountains. It indicates that a disintegration of the Amery Ice Shelf possibly led to increased drainage of ice masses from the Prydz Bay hinterland. A new end-member modelling algorithm was successfully applied on sediments from the MacRobertson shelf used to unmix the sand grain size fractions sorted by current activity and ice transport, respectively. Ice retreat on MacRobertson Shelf commenced 12.8 cal. ka BP and ended around 5.5 cal. ka BP. During the Holocene, strong fluctuations of the bottomwater activity were observed, probably related to variations of sea-ice formation in the Cape Darnley polynya. Increased activity of bottom-water flow was reconstructed at transitions from warm to cool conditions, whereas bottom-water activity receded during the mid- Holocene climate optimum. It can be concluded that the Lambert Glacier-Amery Ice Shelf system was relatively stable in terms of climate variations during the Quaternary. In contrast, bottom-water formation due to polynya activity was very sensitive to changes in atmospheric forcing and should gain more attention in future research.
The origin and evolution of granites has been widely studied because granitoid rocks constitute a major portion of the Earth ́s crust. The formation of granitic magma is, besides temperature mainly triggered by the water content of these rocks. The presence of water in magmas plays an important role due to the ability of aqueous fluids to change the chemical composition of the magma. The exsolution of aqueous fluids from melts is closely linked to a fractionation of elements between the two phases. Then, aqueous fluids migrate to shallower parts of the Earth ́s crust because of it ́s lower density compared to that of melts and adjacent rocks. This process separates fluids and melts, and furthermore, during the ascent, aqueous fluids can react with the adjacent rocks and alter their chemical signature. This is particularly impor- tant during the formation of magmatic-hydrothermal ore deposits or in the late stages of the evolution of magmatic complexes. For a deeper insight to these processes, it is essential to improve our knowledge on element behavior in such systems. In particular, trace elements are used for these studies and petrogenetic interpretations because, unlike major elements, they are not essential for the stability of the phases involved and often reflect magmatic processes with less ambiguity. However, for the majority of important trace elements, the dependence of the geochemical behavior on temperature, pressure, and in particular on the composition of the system are only incompletely or not at all experimentally studied. Former studies often fo- cus on the determination of fluid−melt partition coefficients (Df/m=cfluid/cmelt) of economically interesting elements, e.g., Mo, Sn, Cu, and there are some partitioning data available for ele- ments that are also commonly used for petrological interpretations. At present, no systematic experimental data on trace element behavior in fluid−melt systems as function of pressure, temperature, and chemical composition are available. Additionally, almost all existing data are based on the analysis of quenched phases. This results in substantial uncertainties, particularly for the quenched aqueous fluid because trace element concentrations may change upon cooling. The objective of this PhD thesis consisted in the study of fluid−melt partition coefficients between aqueous solutions and granitic melts for different trace elements (Rb, Sr, Ba, La, Y, and Yb) as a function of temperature, pressure, salinity of the fluid, composition of the melt, and experimental and analytical approach. The latter included the refinement of an existing method to measure trace element concentrations in fluids equilibrated with silicate melts di- rectly at elevated pressures and temperatures using a hydrothermal diamond-anvil cell and synchrotron radiation X-ray fluorescence microanalysis. The application of this in-situ method enables to avoid the main source of error in data from quench experiments, i.e., trace element concentration in the fluid. A comparison of the in-situ results to data of conventional quench experiments allows a critical evaluation of quench data from this study and literature data. In detail, starting materials consisted of a suite of trace element doped haplogranitic glasses with ASI varying between 0.8 and 1.4 and H2O or a chloridic solution with m NaCl/KCl=1 and different salinities (1.16 to 3.56 m (NaCl+KCl)). Experiments were performed at 750 to 950◦C and 0.2 or 0.5 GPa using conventional quench devices (externally and internally heated pressure vessels) with different quench rates, and at 750◦C and 0.2 to 1.4 GPa with in-situ analysis of the trace element concentration in the fluids. The fluid−melt partitioning data of all studied trace elements show 1. a preference for the melt (Df/m < 1) at all studied conditions, 2. one to two orders of magnitude higher Df/m using chloridic solutions compared to experiments with H2O, 3. a clear dependence on the melt composition for fluid−melt partitioning of Sr, Ba, La, Y, and Yb in experiments using chloridic solutions, 4. quench rate−related differences of fluid−melt partition coefficients of Rb and Sr, and 5. distinctly higher fluid−melt partitioning data obtained from in-situ experiments than from comparable quench runs, particularly in the case of H2O as starting solution. The data point to a preference of all studied trace elements for the melt even at fairly high salinities, which contrasts with other experimental studies, but is supported by data from studies of natural co-genetically trapped fluid and melt inclusions. The in-situ measurements of trace element concentrations in the fluid verify that aqueous fluids will change their composition upon cooling, which is in particular important for Cl free systems. The distinct differences of the in-situ results to quench data of this study as well as to data from the literature signify the im- portance of a careful fluid sampling and analysis. Therefore, the direct measurement of trace element contents in fluids equilibrated with silicate melts at elevated PT conditions represents an important development to obtain more reliable fluid−melt partition coefficients. For further improvement, both the aqueous fluid and the silicate melt need to be analyzed in-situ because partitioning data that are based on the direct measurement of the trace element content in the fluid and analysis of a quenched melt are still not completely free of quench effects. At present, all available data on element complexation in aqueous fluids in equilibrium with silicate melts at high PT are indirectly derived from partitioning data, which involves in these experiments assumptions on the species present in the fluid. However, the activities of chemical components in these partitioning experiments are not well constrained, which is required for the definition of exchange equilibria between melt and fluid species. For example, the melt-dependent variation of partition coefficient observed for Sr imply that this element can not only be complexed by Cl− as suggested previously. The data indicate a more complicated complexation of Sr in the aqueous fluid. To verify this hypothesis, the in-situ setup was also used to determine strontium complexation in fluids equilibrated with silicate melts at desired PT conditions by the application of X-ray absorption near edge structure (XANES) spectroscopy. First results show a strong effect of both fluid and melt composition on the resulting XANES spectra, which indicates different complexation environments for Sr.
Barium, lanthanum, ytterbium, and yttrium partitioning experiments between fluid-saturated haplogranitic melts and aqueous solutions were conducted at 750 to 950 degrees C and 0.2 to 1 GPa to investigate the effects of melt and fluid composition, pressure, and temperature. Partition coefficients were determined using different experimental methods. On one hand quenched experiments were performed, and on the other hand, trace element contents in the aqueous fluid were determined directly using a hydrothermal diamond-anvil cell and synchrotron radiation X-ray fluorescence microanalysis of K-lines. The latter required a high excitation energy of 50 key due to the high energies necessary to excite the K-lines of the studied elements. The data from these two techniques showed good agreement for chloridic solutions, whereas quenching had a significant effect on results of the experiments with only water in the case of Ba. In Cl-free experiments, lanthanum and yttrium, trace element contents were even below detection limit in the quenched fluids, whereas small concentrations were detected in comparable in-situ experiments. This distinct difference is likely due to back reactions between fluid and melt upon cooling. The partitioning data of all elements show no dependence on the temperature and only small dependence on pressure. In contrast, the partitioning is strongly influenced by the composition of the starting fluid and melt. For chloridic fluids, there was a sharp increase in the Ba, La, Y and Yb partition coefficients with the alumina saturation index (ASI). The Ba partition coefficient increased from 0.002 at an ASI of 0.8 to 0.55 at an ASI of 1.07. At higher ASI, it decreased slightly to 0.2 at an ASI of similar to 1.3. Likewise, it was one to two orders of magnitude higher in chloridic fluids compared to those found in H2O experiments. Fluid-melt partition coefficients of La and Y increased from 0.002 at an ASI of similar to 0.8 to similar to 0.1 at an ASI of 1.2. In the same ASI range, the Yb partition coefficient increased to a maximum value of 0.02. Even at high salinities all elements fractionate into the melt. The compositional dependence of the partitioning data imply that both melt composition and fluid composition have a strong influence on trace element behavior and that complexation of Ba. REE and Y tin the fluid is not only controlled by the presence of Cl- in the fluid. Instead, interaction of these elements with major melt components dissolved in the fluid is very likely.
Cities often have higher species diversity than the surrounding landscape. This diversity is important for both nature conservation and urban planning. The recreation of residents and the protection of species and habitats are simultaneous targets of maintaining urban green spaces. Data about the distribution and richness of species and their habitats have been compiled frequently; however, it is difficult and costly to measure the complete biodiversity of a region, necessitating useful surrogates. We tested species and habitat data in 27 protected areas in a Central German city and asked (1) whether the diversity of selected taxa acts as a surrogate for the diversity of other taxa and total investigated diversity, and (2) whether landscape structure and human impact explain species richness. Landscape structure metrics were based on soil and habitat types; human influence was measured as the degree of hemeroby. We tested and accounted for sample bias prior to analyses. (1) Vascular plant species richness explained total richness and single taxon richness best. (2) The size of a protected area was the most important predictor of species richness. After correcting for the effect of size, shape complexity, isolation, and matrix properties remained significant. Accordingly, the type of data frequently used for urban planning - collected over several years, by various persons for various purposes - is suitable regarding systematic conservation planning for species richness. The surrogate taxa concept applies in urban areas but with restrictions. Additionally, species richness should be examined in the context of both the city and its surrounding countryside.
To calibrate delta O-18 time-series from speleothems in the eastern Indian summer monsoon (ISM) region of India, and to understand the moisture regime over the northern Bay of Bengal (BoB) we analyze the delta O-18 and delta D of rainwater, collected in 2007 and 2008 near Cherrapunji, India. delta D values range from + 18.5 parts per thousand to 144.4 parts per thousand, while delta O-18 varies between +0.8 parts per thousand and 18.8 parts per thousand. The Local Meteoric Water Line (LMWL) is found to be indistinguishable from the Global Meteoric Water Line (GMWL). Late ISM (September-October) rainfall exhibits lowest delta O-18 and delta D values, with little relationship to the local precipitation amount. There is a trend to lighter isotope values over the course of the ISM, but it does not correlate with the patterns of temperature and rainfall amount delta O-18 and delta D time-series have to be interpreted with caution in terms of the 'amount effect' in this subtropical region. We find that the temporal trend in delta O-18 reflects increasing transport distance during the ISM, isotopic changes in the northern BoB surface waters during late ISM, and vapor re-equilibration with rain droplets. Using an isotope box model for surface ocean waters, we quantify the potential influence of river runoff on the isotopic composition of the seasonal freshwater plume in the northern BoB. Temporal variations in this source can contribute up to 25% of the observed changes in stable isotopes of precipitation in NE India. To delineate other moisture sources, we use backward trajectory computations and find a strong correlation between source region and isotopic composition. Palaeoclimatic stable isotope time-series from northeast Indian speleothems likely reflect changes in moisture source and transport pathway, as well as the isotopic composition of the BoB surface water, all of which in turn reflect ISM strength. Stalagmite records from the region can therefore be interpreted as integrated measures of the ISM strength.
In piston cores from the open subarctic Pacific and the Okhotsk Sea, diatom-bound delta N-15 (delta N-15(db)), biogenic opal, calcium carbonate, and barium were measured from coretop to the previous glacial maximum (MIS 6). Glacial intervals are generally characterized by high delta N-15(db) (similar to 8 parts per thousand) and low productivity, whereas interglacial intervals have a lower delta N-15(db) (5.7-6.3 parts per thousand) and indicate high biogenic productivity. These data extend the regional swath of evidence for nearly complete surface nutrient utilization during glacial maxima, consistent with stronger upper water column stratification throughout the subarctic region during colder intervals. An early deglacial decline in delta N-15(db) of 2 parts per thousand at similar to 17.5 ka, previously observed in the Bering Sea, is found here in the open subarctic Pacific record and arguably also in the Okhotsk, and a case can be made that a similar decrease in delta N-15(db) occurred in both regions at the previous deglaciation as well. The early deglacial delta N-15(db) decrease, best explained by a decrease in surface nutrient utilization, appears synchronous with southern hemisphere-associated deglacial changes and with the Heinrich 1 event in the North Atlantic. This delta N-15(db) decrease may signal the initial deglacial weakening in subarctic North Pacific stratification and/or a deglacial increase in shallow subsurface nitrate concentration. If the former, it would be the North Pacific analogue to the increase in vertical exchange inferred for the Southern Ocean at the time of Heinrich Event 1. In either case, the lack of any clear change in paleoproductivity proxies during this interval would seem to require an early deglacial decrease in the iron-to-nitrate ratio of subsurface nutrient supply or the predominance of light limitation of phytoplankton growth during the deglaciation prior to Bolling-Allerod warming.
Based on technological advances made within the past decades, ground-penetrating radar (GPR) has become a well-established, non-destructive subsurface imaging technique. Catalyzed by recent demands for high-resolution, near-surface imaging (e.g., the detection of unexploded ordnances and subsurface utilities, or hydrological investigations), the quality of today's GPR-based, near-surface images has significantly matured. At the same time, the analysis of oil and gas related reflection seismic data sets has experienced significant advances. Considering the sensitivity of attribute analysis with respect to data positioning in general, and multi-trace attributes in particular, trace positioning accuracy is of major importance for the success of attribute-based analysis flows. Therefore, to study the feasibility of GPR-based attribute analyses, I first developed and evaluated a real-time GPR surveying setup based on a modern tracking total station (TTS). The combination of current GPR systems capability of fusing global positioning system (GPS) and geophysical data in real-time, the ability of modern TTS systems to generate a GPS-like positional output and wireless data transmission using radio modems results in a flexible and robust surveying setup. To elaborate the feasibility of this setup, I studied the major limitations of such an approach: system cross-talk and data delays known as latencies. Experimental studies have shown that when a minimal distance of ~5 m between the GPR and the TTS system is considered, the signal-to-noise ratio of the acquired GPR data using radio communication equals the one without radio communication. To address the limitations imposed by system latencies, inherent to all real-time data fusion approaches, I developed a novel correction (calibration) strategy to assess the gross system latency and to correct for it. This resulted in the centimeter trace accuracy required by high-frequency and/or three-dimensional (3D) GPR surveys. Having introduced this flexible high-precision surveying setup, I successfully demonstrated the application of attribute-based processing to GPR specific problems, which may differ significantly from the geological ones typically addressed by the oil and gas industry using seismic data. In this thesis, I concentrated on archaeological and subsurface utility problems, as they represent typical near-surface geophysical targets. Enhancing 3D archaeological GPR data sets using a dip-steered filtering approach, followed by calculation of coherency and similarity, allowed me to conduct subsurface interpretations far beyond those obtained by classical time-slice analyses. I could show that the incorporation of additional data sets (magnetic and topographic) and attributes derived from these data sets can further improve the interpretation. In a case study, such an approach revealed the complementary nature of the individual data sets and, for example, allowed conclusions about the source location of magnetic anomalies by concurrently analyzing GPR time/depth slices to be made. In addition to archaeological targets, subsurface utility detection and characterization is a steadily growing field of application for GPR. I developed a novel attribute called depolarization. Incorporation of geometrical and physical feature characteristics into the depolarization attribute allowed me to display the observed polarization phenomena efficiently. Geometrical enhancement makes use of an improved symmetry extraction algorithm based on Laplacian high-boosting, followed by a phase-based symmetry calculation using a two-dimensional (2D) log-Gabor filterbank decomposition of the data volume. To extract the physical information from the dual-component data set, I employed a sliding-window principle component analysis. The combination of the geometrically derived feature angle and the physically derived polarization angle allowed me to enhance the polarization characteristics of subsurface features. Ground-truth information obtained by excavations confirmed this interpretation. In the future, inclusion of cross-polarized antennae configurations into the processing scheme may further improve the quality of the depolarization attribute. In addition to polarization phenomena, the time-dependent frequency evolution of GPR signals might hold further information on the subsurface architecture and/or material properties. High-resolution, sparsity promoting decomposition approaches have recently had a significant impact on the image and signal processing community. In this thesis, I introduced a modified tree-based matching pursuit approach. Based on different synthetic examples, I showed that the modified tree-based pursuit approach clearly outperforms other commonly used time-frequency decomposition approaches with respect to both time and frequency resolutions. Apart from the investigation of tuning effects in GPR data, I also demonstrated the potential of high-resolution sparse decompositions for advanced data processing. Frequency modulation of individual atoms themselves allows to efficiently correct frequency attenuation effects and improve resolution based on shifting the average frequency level. GPR-based attribute analysis is still in its infancy. Considering the growing widespread realization of 3D GPR studies there will certainly be an increasing demand towards improved subsurface interpretations in the future. Similar to the assessment of quantitative reservoir properties through the combination of 3D seismic attribute volumes with sparse well-log information, parameter estimation in a combined manner represents another step in emphasizing the potential of attribute-driven GPR data analyses.
Understanding the interactions between the different processes that control the geothermal and fluid flow fields in sedimentary basins is crucial for exploitation of geothermal energy. Numerical models provide predictive and feasible information for a correct assessment of geothermal resources especially in areas where data acquisition is demanding. Here, we present results from numerical efforts to characterize the thermal structure and its interaction with the fluid system for the area of the North East German Basin (NEGB). The relative impact of the different (diffusive and advective) processes affecting the hydrothermal setting of the basin are investigated by means of three- dimensional numerical simulations. Lithospheric-scale numerical models are evaluated to understand the specific thermal signature of the relevant factors influencing the present-day conductive geothermal field in the NEGB. Shallow and deep structural controls on the thermal configuration of the basin are addressed and quantified. Interaction between the resulting thermal field and the active fluid system is investigated by means of three-dimensional simulations of coupled fluid flow and heat transport. Factors influencing stability and reliability of modeling predictions are discussed. The main effort is to build a physically consistent model for the basin which integrates the impacts of thermal gradients on the regional fluid regime and their coupling with the main geological units defining the basin.