Refine
Document Type
- Article (4)
- Doctoral Thesis (4)
- Postprint (1)
Is part of the Bibliography
- yes (9) (remove)
Keywords
- antibody (9) (remove)
The discovery that certain diseases have specific miRNA signatures which correspond to disease progression opens a new biomarker category. The detection of these small non-coding RNAs is performed routinely using body fluids or tissues with real-time PCR, next-generation sequencing, or amplification-based miRNA assays. Antibody-based detection systems allow an easy onset handling compared to PCR or sequencing and can be considered as alternative methods to support miRNA diagnostic in the future. In this study, we describe the generation of a camelid heavy-chain-only antibody specifically recognizing miRNAs to establish an antibody-based detection method. The generation of nucleic acid-specific binders is a challenge. We selected camelid binders via phage display, expressed them as VHH as well as full-length antibodies, and characterized the binding to several miRNAs from a signature specific for dilated cardiomyopathy. The described workflow can be used to create miRNA-specific binders and establish antibody-based detection methods to provide an additional way to analyze disease-specific miRNA signatures.
The discovery that certain diseases have specific miRNA signatures which correspond to disease progression opens a new biomarker category. The detection of these small non-coding RNAs is performed routinely using body fluids or tissues with real-time PCR, next-generation sequencing, or amplification-based miRNA assays. Antibody-based detection systems allow an easy onset handling compared to PCR or sequencing and can be considered as alternative methods to support miRNA diagnostic in the future. In this study, we describe the generation of a camelid heavy-chain-only antibody specifically recognizing miRNAs to establish an antibody-based detection method. The generation of nucleic acid-specific binders is a challenge. We selected camelid binders via phage display, expressed them as VHH as well as full-length antibodies, and characterized the binding to several miRNAs from a signature specific for dilated cardiomyopathy. The described workflow can be used to create miRNA-specific binders and establish antibody-based detection methods to provide an additional way to analyze disease-specific miRNA signatures.
Monoklonale Antikörper (mAK) sind eines der wichtigsten Biomoleküle für die Umweltanalytik und die medizinische Diagnostik. Für die Detektion von Mikroorganismen bilden sie die Grundlage für ein schnelles und präzises Testverfahren. Bis heute gibt es, aufgrund des hohen zeitlichen und materiellen Aufwandes und der unspezifischen Immunisierungsstrategien, nur wenige mAK, die spezifisch Mikroorganismen erkennen.
Zu diesem Zweck sollte ein anwendbares Verfahren für die Generierung von mAK gegen Mikroorganismen entwickelt werden, welches anhand von Escherichia coli O157:H7 und Legionella pneumophila validiert wurde. In dieser Dissertation konnten neue Oberflächenstrukturen auf den Mikroorganismen mittels vergleichender Genomanalysen und in silico Epitopanalysen identifiziert werden. Diese wurden in das Virushüllprotein VP1 integriert und für eine gezielte Immunisierungsstrategie verwendet. Für die Bestimmung antigenspezifischer antikörperproduzierender Hybridome wurde ein Immunfärbeprotokoll entwickelt und etabliert, um die Hybridome im Durchflusszytometer zu sortieren.
In der vorliegenden Studie konnten für E. coli O157:H7 insgesamt 53 potenzielle Proteinkandidaten und für L. pneumophila 38 Proteine mithilfe der bioinformatischen Analyse identifiziert werden. Fünf verschiedene potenzielle Epitope wurden für E. coli O157:H7 und drei verschiedenen für L. pneumophila ausgewählt und für die Immunisierung mit chimären VP1 verwendet. Alle Immunseren zeigten eine antigenspezifische Immunantwort. Aus den nachfolgend generierten Hybridomzellen konnten mehrere Antikörperkandidaten gewonnen werden, welche in Charakterisierungsstudien eine starke Bindung zu E. coli O157:H7 bzw. L. pneumophila vorwiesen. Kreuzreaktivitäten zu anderen relevanten Mikroorganismen konnten keine bzw. nur in geringem Maße festgestellt werden.
Folglich konnte der hier beschriebene interdisziplinäre Ansatz zur Generierung spezifischer mAK gegen Mikroorganismen nachweislich spezifische mAK hervorbringen und ist als hocheffizienter Arbeitsablauf für die Herstellung von Antikörpern gegen Mikroorganismen einsetzbar.
Incorporation of noncanonical amino acids (ncAAs) with bioorthogonal reactive groups by amber suppression allows the generation of synthetic proteins with desired novel properties. Such modified molecules are in high demand for basic research and therapeutic applications such as cancer treatment and in vivo imaging. The positioning of the ncAA-responsive codon within the protein's coding sequence is critical in order to maintain protein function, achieve high yields of ncAA-containing protein, and allow effective conjugation. Cell-free ncAA incorporation is of particular interest due to the open nature of cell-free systems and their concurrent ease of manipulation. In this study, we report a straightforward workflow to inquire ncAA positions in regard to incorporation efficiency and protein functionality in a Chinese hamster ovary (CHO) cell-free system. As a model, the well-established orthogonal translation components Escherichia coli tyrosyl-tRNA synthetase (TyrRS) and tRNATyr(CUA) were used to site-specifically incorporate the ncAA p-azido-l-phenylalanine (AzF) in response to UAG codons. A total of seven ncAA sites within an anti-epidermal growth factor receptor (EGFR) single-chain variable fragment (scFv) N-terminally fused to the red fluorescent protein mRFP1 and C-terminally fused to the green fluorescent protein sfGFP were investigated for ncAA incorporation efficiency and impact on antigen binding. The characterized cell-free dual fluorescence reporter system allows screening for ncAA incorporation sites with high incorporation efficiency that maintain protein activity. It is parallelizable, scalable, and easy to operate. We propose that the established CHO-based cell-free dual fluorescence reporter system can be of particular interest for the development of antibody-drug conjugates (ADCs).
Antikörper werden in verschiedensten Bereichen, sowohl zu therapeutischen als auch zu diagnostischen und forschungsorientierten Zwecken verwendet. Vor der Verwendung des Antikörpers bedarf es der Charakterisierung seiner Eigenschaften, in Bezug auf sein Epitop und sein Bindeverhalten gegenüber dem Paratop. Gleichzeitig muss, in Abhängigkeit des Einsatzes, der Antikörper, für den gewünschten Gebrauch, validiert werden. Zu diesem Zweck wurden in der vorliegenden Arbeit Bead-basierte, multiplexe Testsysteme entworfen, ausgetestet und etabliert mit dem Ziel, eine einfache Screeningmethode zu entwickeln, um eine hohe Anzahl an Proben beziehungsweise Analyten gleichzeitig bestimmen zu können. Dafür wurden drei verschiedene Herangehensweisen etabliert.
So wurden ein phospho-PKA-Substrat Antikörper, welcher phosphorylierte Bindemotive der PKA der Form RRxpS erkennt, gleichzeitig mit einer Reihe an Peptide getestet, welche Punktmutationen im Vergleich zur Konsensussequenz enthielten, um den Einfluss einzelner Aminosäuren auf die Bindung des Antikörpers zu untersuchen. Es konnte im Multiplex gezeigt werden, dass die Unterschiede im Antikörperbindungsverhalten in Abhängigkeit der Aminosäure an verschiedenen P-Positionen detektierbar waren. Mit dem Bead-basierten Multiplexansatz konnten, durch Messungen von Konzentrationsreihen des Antikörpers, Bindungskinetiken aufgenommen und diese mit bereits etablierten Methoden verglichen werden.
Des Weiteren wurden verschiedene Antikörper, welche essenzielle Bestandteile von Bead-basierten Testsystemen darstellten, validiert. Es wurden dabei verschiedene Antikörper, welche spezifisch THC und CBD erkennen ausgetestet und anschließend ein kompetitiver Assay zur Detektion von THC und CBD in humanem Serum etabliert, und die Nachweisgrenzen bestimmt.
Ferner sollten Pferdeseren von Tieren, welche am Sommerekzem leiden, auf ihren IgE-Gehalt hin bestimmt werden. Dafür wurden relevante Proteine rekombinant hergestellt und durch Immobilisierung an Beads im Multiplex mit Serum inkubiert. Die spezifische Bindung des IgE an die Allergen sollte damit messbar gemacht werden können. Für die Gesamtvalidierung des Testsystems wurden zuvor sämtliche Einzelschritte einzeln validiert, um im Anschluss im multiplexen Screening zu vermessen.
Die Nutzung von Bead-basierten Multiplexmessungen als eine Plattformtechnologie erleichtert die Charakterisierung von Antikörpern sowie ihre Validierung für verschiedene Testsysteme.
In the present thesis, AC electrokinetic forces, like dielectrophoresis and AC electroosmosis, were demonstrated as a simple and fast method to functionalize the surface of nanoelectrodes with submicrometer sized biological objects. These nanoelectrodes have a cylindrical shape with a diameter of 500 nm arranged in an array of 6256 electrodes. Due to its medical relevance influenza virus as well as anti-influenza antibodies were chosen as a model organism. Common methods to bring antibodies or proteins to biosensor surfaces are complex and time-consuming. In the present work, it was demonstrated that by applying AC electric fields influenza viruses and antibodies can be immobilized onto the nanoelectrodes within seconds without any prior chemical modification of neither the surface nor the immobilized biological object. The distribution of these immobilized objects is not uniform over the entire array, it exhibits a decreasing gradient from the outer row to the inner ones. Different causes for this gradient have been discussed, such as the vortex-shaped fluid motion above the nanoelectrodes generated by, among others, electrothermal fluid flow. It was demonstrated that parts of the accumulated material are permanently immobilized to the electrodes. This is a unique characteristic of the presented system since in the literature the AC electrokinetic immobilization is almost entirely presented as a method just for temporary immobilization. The spatial distribution of the immobilized viral material or the anti-influenza antibodies at the electrodes was observed by either the combination of fluorescence microscopy and deconvolution or by super-resolution microscopy (STED). On-chip immunoassays were performed to examine the suitability of the functionalized electrodes as a potential affinity-based biosensor. Two approaches were pursued: A) the influenza virus as the bio-receptor or B) the influenza virus as the analyte. Different sources of error were eliminated by ELISA and passivation experiments. Hence, the activity of the immobilized object was inspected by incubation with the analyte. This resulted in the successful detection of anti-influenza antibodies by the immobilized viral material. On the other hand, a detection of influenza virus particles by the immobilized anti-influenza antibodies was not possible. The latter might be due to lost activity or wrong orientation of the antibodies. Thus, further examinations on the activity of by AC electric fields immobilized antibodies should follow. When combined with microfluidics and an electrical read-out system, the functionalized chips possess the potential to serve as a rapid, portable, and cost-effective point-of-care (POC) device. This device can be utilized as a basis for diverse applications in diagnosing and treating influenza, as well as various other pathogens.
In dieser Arbeit wird die Entwicklung eines bifunktionellen Biosensors nach dem Vorbild eines Baukastensystems beschrieben. Das Ziel wird durch die Kombination verschiedenster molekularer Erkennungselemente erreicht. Solche molekularen Erkennungselemente im verwendeten System sind: • Propidium und die periphere anionische Bindungsstelle der Acetylcholinesterase (AChE) • Organophosphate und das aktive Zentrum der AChE • ein an die AChE gekoppeltes Hapten und das Epitop eines Antikörpers • ein an die AChE gekoppeltes Hapten, das als Ligand ein weiteres Enzym bindet Neben dem molekularen Erkennungselement wird ein Biosensor ebenso durch die Art des Transducers charakterisiert. Hier werden Quarzplättchen mit Goldelektroden zur Signalumwandlung eingesetzt. Die Verwendung solcher Sensoren mit einem EQCM-Gerät (electrochemical quartz crystal microbalance) ermöglicht es zwei Messsignale gleichzeitig aufzunehmen: die piezoelektrische Bestimmung einer Massebeladung und die amperometrische Detektion von Enzymaktivität auf der Sensoroberfläche. Für die Analytik stehen somit zwei verschiedene Assay-Varianten zur Verfügung: die Bestimmung der Inhibition der ACHE-Aktivität und ein Bindungstest über das Hapten. Die Basis beider Tests ist die Modifizierung der piezoelektrischen Kristalle mit Propidium – einem reversiblen Inhibitor der Acetylcholinesterase. Dies ermöglicht die Beladung des Sensors mit AChE über die Wechselwirkung mit der peripheren anionischen Bindungsstelle des Enzyms. Die Aktivität der so immobilisierten AChE und die Inhibition durch Organophosphate (Pestizide) werden amperometrisch bestimmt. Durch die chemische Kopplung eines Hapten an die Cholinesterase wird ein weiteres Erkennungselement eingeführt. Das eröffnet die Möglichkeit, an die auf dem Propidium-modifizierten Sensor immobilisierte, haptenisierte Cholinesterase einen Antikörper zu binden. Als Voraussetzung für elektrochemische Bestimmung der AChE-Aktivität wurde zunächst die Optimierung der amperometrischen Messmethode vorgenommen. Die Oxidatationspotentiale für die Detektion von Thiocholin wurden im Bereich von 150 mV bis 300 mV variiert. Dabei wurde für die nachfolgenden Untersuchungen eine Arbeitspotential von 200 mV (vs. Ag/AgCl) festgelegt, da hier das beste Verhältnis von gemessenem Oxidationsstrom und Langzeitstabilität der Propidium-modifizierten Sensoren erzielt wurde. Dieses Potential war deutlich geringer als die bisher publizierten Mediator-freien AChE-Biosensoren. Es wurde ein Vergleich verschiedener Organophosphate über ihre Inhibitionskonstanten durchgeführt, um diejenigen herauszufinden, die möglichst schnell mit dem aktiven Zentrum der Acetylcholinesterase reagieren. Das verwendete Messsystem beruht nicht auf der Vorinkubation der AChE und damit einer Einstellung des Inhibitionsgleichgewichts. Stattdessen wurde die Inhibition der AChE direkt im Fließsystem verfolgt. Daher war eine schnelle Inhibitionskinetik für einen empfindlichen Organophosphat-Nachweis erforderlich. Da einige Inhibitoren nur als Phosphothionat vorlagen, wurde die Überführung dieser Substanzen in die entsprechenden Oxo-Formen mittels N-Bromsuccinimid untersucht. Die NBS-Aktivierung wurde erfolgreich durchgeführt, die erwartete Inhibitionsstärke konnte jedoch aufgrund hydrolytischer Vorgänge nicht erreicht werden. Untersuchungen mit Diisopropylfluorophosphat (DFP) und Chlorpyriphos-oxon (CPO) konnten die Voruntersuchungen über die Inhibitionskinetik in Bezug auf die erreichten Nachweisgrenzen von 2E-06 M für DFP und 5E-08 M für CPO bestätigen. Für die chemische Modifizierung der Acetylcholinesterase wurde zunächst 2,4-Dichlorphenoxyessigsäure (2,4-D) als Hapten ausgewählt. 2,4-D wird als Herbizid eingesetzt und in der EU über die Gewässerschutzrichtlinie reguliert. 2,4-D konnte in unterschiedlichen molaren Verhältnissen von 2,6 : 1 bis 260 : 1 (2,4-D : AChE) nach Aktivierung mit einem Norbornendicarboximido-Derivat an die AChE gekoppelt werden. Dabei konnte die spezifische Aktivität der Acetylcholinesterase erhalten und die Bindung eines anti-2,4-D-Antikörpers ermöglicht werden. Zur Verstärkung des piezolelektrischen Signals der Antikörperbindung wurden die Immunoglobuline zunächst an Goldnanopartikel gekoppelt. Damit konnte eine Verstärkung um den Faktor 10 erreicht werden. Allerdings waren die Antikörper-modifizierten Goldnanopartikel nicht langzeitstabil. Daher wurden auch Silica-Nanopartikel als Matrix für die Antikörperkopplung getestet. Mit diesem System konnte eine Verstärkung um den Faktor von 5 bis 13 je nach Grad der Beladung den Nanopartikel mit Antikörper bestimmt werden. Die hohe unspezifische Bindung der Antikörper-Nanopartikel-Konjugate an den Propidium-modifizierten QCM-Sensor konnte keinen empfindlichen 2,4-D-Nachweis ermöglichen. Als Alternative wurde Kokain (Benzoylecgonin, BZE) als Hapten an die Aceytlcholinesterase gekoppelt. Da Kokain selbst auch als Inhibitor im aktiven Zentrum der AChE binden kann, wurden zwei verschiedene Strategien zur Konjugatsynthese verfolgt. Durch Zugabe von Kokain während der Kopplung sollte die kovalente Fixierung des Kokain-Derivats BZE-DADOO im aktiven Zentrum verhindert werden (Konjugat B). In der Tat konnten mit dieser Synthesestrategie 67% der spezifischen Cholinesterase-Aktivität erhalten werden, während im Kokain-freien Ansatz (Konjugat A) nur 2% der Ausgangsaktivität wiedergefunden wurden. Das BZE-AChE-Konjugat ermöglichte auch die Untersuchung der Bindungskinetik der anti-BZE-Antikörper. Dabei konnte eine Assoziationsgeschwindigkeitskonstante ka von 12911 l/(mol•s) berechnet werden. Dieser Wert ist trotz der vergleichsweise geringen Oberflächenbeladung vergleichbar mit den in der Literatur angegebenen Werten. Die Dissoziationsgeschwindigkeitskonstante ist mit 2,89E−3 1/s um den Faktor 30 höher als der Literaturwert. Diese Abweichung ist auf Unterschiede im Bindungsmodell zurückzuführen. Mit beiden BZE-AChE-Konjugaten konnte ein kompetetiver Immunoassay mit Kokain im Fließsystem durchgeführt werden. Dabei zeigte sich für beide Konjugate ein ähnlicher Testmittelpunkt: IC50 = 4,40E−8 mol/l für Konjugat A bzw. IC50 = 1,77E−8 mol/l für Konjugat B. Diese Werte sind vergleichbar zu bereits publizierten Kokainassays im Fließsystem. Wie vorstehend beschrieben, bindet Kokain als Inhibitor auch im aktiven Zentrum von Cholinesterasen. Diese Eigenschaft wurde genutzt, um ein zweites Enzym – Butyrylcholinesterase (BChE) – an die BZE-AChE zu binden. Die Spezifität dieser Bindung konnte durch die Abwesenheit einer Affinität der BChE zum Propidium und durch die Blockierbarkeit der Bindung von BChE und BZE-AChE durch Kokain nachgewiesen werden. Damit konnte erfolgreich die Kombination mehrere molekularer Erkennungselemente demonstriert werden. Die Propidium-Plattform ermöglicht den Aufbau einer Architektur aus verschiedenen Cholinesterasen, die über unterschiedliche Bindungsstellen wechselwirken. Sowohl freie als auch BZE-modifizierte AChE können über die Affinität zum Propidium auf dem EQCM-Sensor immobilisiert werden. Mit Kokain als Substrat der Butyrylcholinesterase kann Benzoylecgonin nicht nur als Epitop für die Bindung eines Antikörpers, sondern auch als Erkennungselement für die BChE genutzt werden. Auf der anderen Seite erschwert die geringe Affinität der BChE im Gegensatz zum anti-BZE-Antikörper den Einsatz dieses Systems für analytische Zwecke. Durch die Verwendung anderer Ligand-Enzym-Kombinationen läßt sich das in dieser Arbeit vorgestellte Konzept noch weiter ausbauen und ermöglicht damit eine Entwicklung ausgehend von „einfachen“ molekularen Erkennungselementen (MRE) hin zu „multifunktionellen“ Erkennungselementsystemen. In dieser Arbeit konnte demonstriert werden, dass der Aufbau solch komplexe Systeme möglich ist, ohne Abstriche in Bezug auf die Empfindlichkeit der einzelnen Assays hinzunehmen.
Tyramine is an important neurotransmitter, neuromodulator, and neurohormone in insects. In honeybees, it is assumed to have functions in modulating sensory responsiveness and controlling motor behavior. Tyramine can bind to two characterized receptors in honeybees, both of which are coupled to intracellular cAMP pathways. How tyramine acts on neuronal, cellular and circuit levels is unclear. We investigated the spatial brain expression of the tyramine receptor AmTAR1 using a specific antibody. This antibody detects a membrane protein of the expected molecular weight in western blot analysis. In honeybee brains, it labels different structures which process sensory information. Labeling along the antennal nerve, in projections of the dorsal lobe and in the gnathal ganglion suggest that tyramine receptors are involved in modulating gustatory and tactile perception. Furthermore, the ellipsoid body of the central complex and giant synapses in the lateral complex show AmTAR1-like immunoreactivity (AmTAR1-IR), suggesting a role of this receptor in modulating sky-compass information and/or higher sensor-motor control. Additionally, intense signals derive from the mushroom bodies, higher-order integration centers for olfactory, visual, gustatory and tactile information. To investigate whether AmTAR1-expressing brain structures are in vicinity to tyramine releasing sites, a specific tyramine antibody was applied. Tyramine-like labeling was observed in AmTAR1-IR positive structures, although it was sometimes weak and we did not always find a direct match of ligand and receptor. Moreover, tyramine-like immunoreactivity was also found in brain regions without AmTAR1-IR (optic lobes, antennal lobes), indicating that other tyramine-specific receptors may be expressed there.
MALDI-TOF-MS-based identification of monoclonal murine Anti-SARS-CoV-2 antibodies within one hour
(2022)
During the SARS-CoV-2 pandemic, many virus-binding monoclonal antibodies have been developed for clinical and diagnostic purposes. This underlines the importance of antibodies as universal bioanalytical reagents. However, little attention is given to the reproducibility crisis that scientific studies are still facing to date. In a recent study, not even half of all research antibodies mentioned in publications could be identified at all. This should spark more efforts in the search for practical solutions for the traceability of antibodies. For this purpose, we used 35 monoclonal antibodies against SARS-CoV-2 to demonstrate how sequence-independent antibody identification can be achieved by simple means applied to the protein. First, we examined the intact and light chain masses of the antibodies relative to the reference material NIST-mAb 8671. Already half of the antibodies could be identified based solely on these two parameters. In addition, we developed two complementary peptide mass fingerprinting methods with MALDI-TOF-MS that can be performed in 60 min and had a combined sequence coverage of over 80%. One method is based on the partial acidic hydrolysis of the protein by 5 mM of sulfuric acid at 99 degrees C. Furthermore, we established a fast way for a tryptic digest without an alkylation step. We were able to show that the distinction of clones is possible simply by a brief visual comparison of the mass spectra. In this work, two clones originating from the same immunization gave the same fingerprints. Later, a hybridoma sequencing confirmed the sequence identity of these sister clones. In order to automate the spectral comparison for larger libraries of antibodies, we developed the online software ABID 2.0. This open-source software determines the number of matching peptides in the fingerprint spectra. We propose that publications and other documents critically relying on monoclonal antibodies with unknown amino acid sequences should include at least one antibody fingerprint. By fingerprinting an antibody in question, its identity can be confirmed by comparison with a library spectrum at any time and context.