Refine
Document Type
- Article (2)
- Doctoral Thesis (1)
Is part of the Bibliography
- yes (3)
Keywords
- surface charge (3) (remove)
Institute
The addition of nano-Al2O3 has been shown to enhance the breakdown voltage of epoxy resin, but its flashover results appeared with disputation. This work concentrates on the surface charge variation and dc flashover performance of epoxy resin with nano-Al2O3 doping. The dispersion of nano-Al2O3 in epoxy is characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The dc flashover voltages of samples under either positive or negative polarity are measured with a finger-electrode system, and the surface charge variations before and after flashovers were identified from the surface potential mapping. The results evidence that nano-Al2O3 would lead to a 16.9% voltage drop for the negative flashovers and a 6.8% drop for positive cases. It is found that one-time flashover clears most of the accumulated surface charges, regardless of positive or negative. As a result, the ground electrode is neighbored by an equipotential zone enclosed with low-density heterocharges. The equipotential zone tends to be broadened after 20 flashovers. The nano-Al2O3 is noticed as beneficial to downsize the equipotential zone due to its capability on charge migration, which is reasonable to maintain flashover voltage at a high level after multiple flashovers. Hence, nano-Al2O3 plays a significant role in improving epoxy with high resistance to multiple flashovers.
Chemische und physikalische Eigenschaften von Polymeren können verschiedene Zelltypen unterschiedlich, z. B. hinsichtlich Adhärenz oder Funktionalität, beeinflussen. Die Elastizität eines Polymers beeinflusst vor allem, welche Zugkräfte eine Zelle gegenüber ihrem Substrat entwickeln kann. Das Zellverhalten wird dann über intrazelluläre Rückkopplungsmechanismen reguliert. Die Oberflächenladung und/oder Hydrophilie eines Polymers beeinflusst zunächst die Adsorption von Ionen, Proteinen und anderen Molekülen. Vor allem über die Zusammensetzung, Dichte und Konformation der adsorbierten Komponenten werden anschließend die Wechselwirkungen mit den Zellen vermittelt. Des Weiteren können verschiedene Zelltypen unterschiedliche membranassoziierte Proteine, Zucker und Lipide aufweisen, so dass Polymereigenschaften zellspezifische Effekte bewirken können. Für biotechnologische Anwendungen und für den Einsatz in der regenerativen Medizin gewinnen Polymere, die spezifische Zellreaktionen regulieren können, immer weiter an Bedeutung. Die Isolierung und Kultur von primären Keratinozyten ist noch immer anspruchsvoll und die adäquate Heilung von Hautwunden stellt eine fortwährende medizinische Herausforderung dar. Ein Polymer, das eine bevorzugte Adhärenz von Keratinozyten bei gleichzeitig verminderter Anheftung dermaler Fibroblasten ermöglicht, würde erhebliche Vorteile für den Einsatz in der Keratinozyten-Zellkultur und als Wundauflage bieten. Um den potentiell spezifischen Einfluss bestimmter Polymereigenschaften auf primäre humane Keratinozyten und dermale Fibroblasten zu untersuchen, wurde in der vorliegenden Arbeit ein Zellkultursystem für die Mono- und Cokultur beider Zelltypen entwickelt. Das Testsystem wurde als Screening konzipiert, um den Einfluss unterschiedlicher Polymereigenschaften in mehreren Abstufungen auf die Zellen zu untersuchen. Folgende Parameter wurden untersucht: 1. Vitalität und Dichte adhärenter und nicht-adhärierter Zellen, 2. Schädigung der Zellmembran, 3. selektive Adhärenz von Keratinozyten in Cokultur durch die spezifische immunzytochemische Färbung von Keratin14 und Vimentin. Für die Polymere mit variabler Elastizität wurden zusätzlich die Ablagerung extrazellulärer Matrixkomponenten und die Sekretion löslicher Faktoren durch die Zellen untersucht. Als Modellpolymere für die Variation der Elastizität wurden vernetzte Poly(n-butylacrylate) (cPnBA) verwendet, da deren Elastizität durch den Anteil des Vernetzers eingestellt werden kann. Auf dem weniger elastischen cPnBA zeigte sich in der Cokultur ein doppelt so hohes Verhältnis von Keratinozyten zu Fibroblasten wie auf dem elastischeren cPnBA, so dass ein leichter zellselektiver Effekt angenommen werden kann. Acrylnitril-basierte Copolymere wurden als Modellpolymere für die Variation der Oberflächenladung und Hydrophilie verwendet, da die Eigenschaften durch Art und molaren Anteil des Comonomers eingestellt werden können. Durch Variation des molaren Anteils der Comonomere mit positiver bzw. negativer Ladung, Methacrylsäure-2-aminoethylester-hydrochhlorid (AEMA) und N-3-Aminopropyl-methacrylamid-hydro-chlorid (APMA) bzw. Natriumsalz der 2-Methyl-2-propen-1-sulfonsäure (NaMAS), wurde der Anteil der positiven bzw. negativen Ladung im Copolymer variiert. Durch die Erhöhung des molaren Anteils des hydrophilen Comonomers N-Vinylpyrrolidon (NVP) wurde die Hydrophilie des Copolymers gesteigert. Die Erhöhung des molaren Anteils an positiv geladenem Comonomer AEMA im Copolymer führte tendenziell zu einer höheren Keratinozytendichte, wobei die Fibroblastendichte unverändert blieb. Durch die Erhöhung des molaren Anteils des positiv geladenen Comonomers APMA ergaben sich keine deutlichen Unterschiede in Dichte, Vitalität oder Selektivität der Zellen. Durch die stufenweise Erhöhung des molaren Anteils des negativ geladenen Comonomers NaMAS konnte, wie im Falle von AEMA, eine Tendenz zur verbesserten Keratinozytenadhärenz beobachtet werden. Die Steigerung der Hydrophilie der Copolymere führte sowohl für Keratinozyten als auch für Fibroblasten zu einer reduzierten Adhärenz und Vitalität. In der vorliegenden Doktorarbeit wurde ein Testverfahren etabliert, das die Untersuchung von primären humanen Keratinozyten und primären humanen Fibroblasten in Monokultur und Cokultur auf verschiedenen Polymeren ermöglicht. Die bisherigen Ergebnisse zeigen, dass sich durch die gezielte Modifizierung verschiedener Polymereigenschaften die Adhärenz und Vitalität beider Zelltypen beeinflussen lässt. Die Reduktion der Elastizität sowie die Erhöhung des molaren Anteils geladener Comonomere führten zu einer Zunahme der Keratinozytenadhärenz. Da die Fibroblasten unbeeinflusst blieben, zeigte sich für einige der untersuchten Polymere eine leichte Zellselektivität. Diese könnte durch die weitere Erhöhung der Steifigkeit oder des Anteils geladener Comonomere möglicherweise weiter gesteigert werden.
Polyelectrolytes in dilute solutions (0.01 mmol/L) adsorb in a two-dimensional lamellar phase to oppositely charged lipid monolayers at the air/water interface. The interchain separation is monitored by Grazing Incidence X-ray Diffraction. On monolayer compression, the interchain separation decreases to a factor of two. To investigate the influence of the electrostatic interaction, either the line charge density of the polymer is reduced (a statistic copolymer with 90% and 50% charged monomers) or mixtures between charged and uncharged lipids are used (dipalmitoylphosphatidylcholine (DPPC)/dioctadecyldimethylammonium bromide (DODAB)) On decrease of the surface charge density, the interchain separation increases, while on decrease of the linear charge density, the interchain separation decreases. The ratio between charged monomers and charged lipid molecules is fairly constant; it decreases up to 30% when the lipids are in the fluid phase. With decreasing surface charge or linear charge density, the correlation length of the lamellar order decreases.