Refine
Has Fulltext
- yes (6)
Document Type
- Other (4)
- Article (1)
- Doctoral Thesis (1)
Language
- English (6)
Keywords
- Erdbeben (6) (remove)
Institute
- Institut für Geowissenschaften (6) (remove)
An der Universität Potsdam wird seit 2008 ein automatisiertes Verfahren angewandt, um Bruchparamter großer Erdbeben in quasi-Echtzeit, d.h. wenige Minuten nachdem sich das Beben ereignet hat, zu bestimmen und der Öffentlichkeit via Internet zur Verfügung zu stellen. Es ist vorgesehen, das System in das Deutsch-Indonesische Tsunamifrühwarnsystem (GITEWS) zu integrieren, für das es speziell konfiguriert ist. Wir bestimmen insbesondere die Dauer und die Ausdehnung des Erdbebens, sowie dessen Bruchgeschwindigkeit und -richtung. Dabei benutzen wir die Seismogramme der zuerst eintreffenden P Wellen vom Breitbandstationen in teleseimischer Entfernung vom Beben sowie herkömmliche Arrayverfahren in teilweise modifizierter Form. Die Semblance wir als Ähnlichkeitsmaß verwendet, um Seismogramme eines Stationsnetzes zu vergleichen. Im Falle eines Erdbebens ist die Semblance unter Berücksichtigung des Hypozentrums zur Herdzeit und während des Bruchvorgangs deutlich zeitlich und räumlich erhöht und konzentriert. Indem wir die Ergebnisse verschiedener Stationsnetzwerke kombinieren, erreichen wir Unabhängigkeit von der Herdcharakteristik und eine raum-zeitliche Auflösung, die es erlaubt die o.g. Parameter abzuleiten. In unserem Beitrag skizzieren wir die Methode. Anhand der beiden M8.0 Benkulu Erdbeben (Sumatra, Indonesien) vom 12.09.2007 und dem M8.0 Sichuan Ereignis (China) vom 12.05.2008 demonstrieren wir Auflösungsmöglichkeiten und vergleichen die Ergebnisse der automatisierten Echtzeitanwendung mit nachträglichen Berechnungen. Weiterhin stellen wir eine Internetseite zur Verfügung, die die Ergebnisse präsentiert und animiert. Diese kann z.B. in geowissenschaftlichen Einrichtungen an Computerterminals gezeigt werden. Die Internetauftritte haben die folgenden Adressen: http://www.geo.uni-potsdam.de/arbeitsgruppen/Geophysik_Seismologie/forschung/ruptrack/openday http://www.geo.uni-potsdam.de/arbeitsgruppen/Geophysik_Seismologie/forschung/ruptrack
Earthquakes form by sudden brittle failure of rock mostly as shear ruptures along a rupture plane. Beside this, mechanisms other than pure shearing have been observed for some earthquakes mainly in volcanic areas. Possible explanations include complex rupture geometries and tensile earthquakes. Tensile earthquakes occur by opening or closure of cracks during rupturing. They are likely to be often connected with fluids that cause pressure changes in the pore space of rocks leading to earthquake triggering. Tensile components have been reported for swarm earthquakes in West Bohemia in 2000. The aim and subject of this work is an assessment and the accurate determination of such tensile components for earthquakes in anisotropic media. Currently used standard techniques for the retrieval of earthquake source mechanisms assume isotropic rock properties. By means of moment tensors, equivalent forces acting at the source are used to explain the radiated wavefield. Conversely, seismic anisotropy, i.e. directional dependence of elastic properties, has been observed in the earth's crust and mantle such as in West Bohemia. In comparison to isotropy, anisotropy causes modifications in wave amplitudes and shear-wave splitting. In this work, effects of seismic anisotropy on true or apparent tensile source components of earthquakes are investigated. In addition, earthquake source parameters are determined considering anisotropy. It is shown that moment tensors and radiation patterns due to shear sources in anisotropic media may be similar to those of tensile sources in isotropic media. In contrast, similarities between tensile earthquakes in anisotropic rocks and shear sources in isotropic media may exist. As a consequence, the interpretation of tensile source components is ambiguous. The effects that are due to anisotropy depend on the orientation of the earthquake source and the degree of anisotropy. The moment of an earthquake is also influenced by anisotropy. The orientation of fault planes can be reliably determined even if isotropy instead of anisotropy is assumed and if the spectra of the compressional waves are used. Greater difficulties may arise when the spectra of split shear waves are additionally included. Retrieved moment tensors show systematic artefacts. Observed tensile source components determined for events in West Bohemia in 1997 can only partly be attributed to the effects of moderate anisotropy. Furthermore, moment tensors determined earlier for earthquakes induced at the German Continental Deep Drilling Program (KTB), Bavaria, were reinterpreted under assumptions of anisotropic rock properties near the borehole. The events can be consistently identified as shear sources, although their moment tensors comprise tensile components that are considered to be apparent. These results emphasise the necessity to consider anisotropy to uniquely determine tensile source parameters. Therefore, a new inversion algorithm has been developed, tested, and successfully applied to 112 earthquakes that occurred during the most recent intense swarm episode in West Bohemia in 2000 at the German-Czech border. Their source mechanisms have been retrieved using isotropic and anisotropic velocity models. Determined local magnitudes are in the range between 1.6 and 3.2. Fault-plane solutions are similar to each other and characterised by left-lateral faulting on steeply dipping, roughly North-South oriented rupture planes. Their dip angles decrease above a depth of about 8.4km. Tensile source components indicating positive volume changes are found for more than 60% of the considered earthquakes. Their size depends on source time and location. They are significant at the beginning of the swarm and at depths below 8.4km but they decrease in importance later in the course of the swarm. Determined principle stress axes include P axes striking Northeast and Taxes striking Southeast. They resemble those found earlier in Central Europe. However, depth-dependence in plunge is observed. Plunge angles of the P axes decrease gradually from 50° towards shallow angles with increasing depth. In contrast, the plunge angles of the T axes change rapidly from about 8° above a depth of 8.4km to 21° below this depth. By this thesis, spatial and temporal variations in tensile source components and stress conditions have been reported for the first time for swarm earthquakes in West Bohemia in 2000. They also persist, when anisotropy is assumed and can be explained by intrusion of fluids into the opened cracks during tensile faulting.
Rapid and robust characterization of large earthquakes in terms of their spatial extent and temporal duration is of high importance for disaster mitigation and early warning applications. Backtracking of seismic P-waves was successfully used by several authors to image the rupture process of the great Sumatra earthquake (26.12.2004) using short period and broadband arrays. We follow here an approach of Walker et al. to backtrack and stack broadband waveforms from global network stations using traveltimes for a global Earth model to obtain the overall spatio-temporal development of the energy radiation of large earthquakes in a quick and robust way. We present results for selected events with well studied source processes (Kokoxili 14.11.2001, Tokachi-Oki 25.09.2003, Nias 28.03.2005). Further, we apply the technique in a semi-real time fashion to broadband data of earthquakes with a broadband magnitude >= 7 (roughly corresponding to Mw 6.5). Processing is based on first automatic detection messages from the GEOFON extended virtual network (GEVN).
The spatio-temporal evolution of the three recent tsunamogenic earthquakes (TsE) off-coast N-Sumatra (Mw9.3), 28/03/2005 (Mw8.5) off-coast Nias, on 17/07/2006 (Mw7.7) off-coast Java. Start time, duration, and propagation of the rupture are retrieved. All parameters can be obtained rapidly after recording of the first-arrival phases in near-real time processing. We exploit semblance analysis, backpropagation and broad-band seismograms within 30°-95° distance. Image enhancement is reached by stacking the semblance of arrays within different directions. For the three events, the rupture extends over about 1150, 150, and 200km, respectively. The events in 2004, 2005, and 2006 had source durations of at least 480s, 120s, and 180s, respectively. We observe unilateral rupture propagation for all events except for the rupture onset and the Nias event, where there is evidence for a bilateral start of the rupture. Whereas average rupture speed of the events in 2004 and 2005 is in the order of the S-wave speed (≈2.5-3km/s), unusually slow rupturing (≈1.5 km/s) is indicated for the July 2006 event. For the July 2006 event we find rupturing of a 200 x 100 km wide area in at least 2 phases with propagation from NW to SE. The event has some characteristics of a circular rupture followed by unilateral faulting with change in slip rate. Fault area and aftershock distribution coincide. Spatial and temporal resolution are frequency dependent. Studies of a Mw6.0 earthquake on 2006/09/21 and one synthetic source show a ≈1° limit in resolution. Retrieved source area, source duration as well as peak values for semblance and beam power generally increase with the size of the earthquake making possible an automatic detection and classification of large and small earthquakes.
We study the rupture propagation of the 2008/05/12 Ms8.0 Wenchuan Earthquake. We apply array techniques such as semblance vespagram analysis to P waves recorded at seismic broadband station within 30-100° epicentral distance. By combination of multiple large aperture station groups spatial and temporal resolution is enhanced and problems due source directivity and source mechanism are avoided. We find that seismic energy was released for at least 110 s. Propagating unilaterally at sub-shear rupture velocity of about 2.5 km/s in NE direction, the earthquake reaches a lateral extent of more than 300 km. Whereas high semblance during within 70 s from rupture start indicates simple propagation more complex source processes are indicated thereafter by decreases coherency in seismograms. At this stage of the event coherency is low but significantly above noise level. We emphasize that first result of our computations where obtain within 30 minutes after source time by using an atomized algorithm. This procedure has been routinely and globally applied to major earthquakes. Results are made public through internet.
The Mw=7.7 tsunamogenic earthquake (TsE) on 17 July 2006, 08:19:28 shock the Indian Ocean at about 15 km depth off-coast Java, Indonesia. It caused a local tsunami with wave heights exceeding 2 m. The death toll reached several hundred. Thousands of people were displaced. By means of standard array methods, we have investigated the propagation and the extent of the rupture front of the causative earthquake. Waveform similarity is expressed by means of the semblance. We back-propagate the semblance for first-arrival phases recorded at broad-band stations within teleseismic distances (30°-95°). Image enhancement is realised by stacking the semblance of 8 arrays within different epicentral and azimuthal directions. From teleseismic observations we find rupturing of a 200 x 100 km wide area in at least 2 phases with propagation from NW to SE and source duration >125 s. The event has some characteristics of a circular rupture followed by unilateral faulting with change in slip rate. Unusually slow rupturing (≈1.5 km/s) is indicated. Fault area and aftershock distribution coincide. Spatial and temporal resolution are frequency dependent. Studies of a Mw6.0 earthquake on 2006/09/21 and one synthetic source show a ≈1° limit in resolution. Retrieved source area, source duration as well as peak values for semblance and beam power increase with the size of the earthquake making possible an automatic detection and classification of large and small earthquakes.