Refine
Has Fulltext
- no (26)
Document Type
- Article (26)
Language
- English (26)
Is part of the Bibliography
- yes (26)
Institute
- Interdisziplinäres Zentrum für Dünne Organische und Biochemische Schichten (26) (remove)
The surface structures of crystals based on aromatic oxadiazoles were investigated by AFM. The crystal structure for 2,5-di(p-tolyl)-1,3,4-oxadiazole (DTO) differs from that of 2,5-di (4-methoxycarbonyl-phenyl)-1,3,4- oxadiazole (DMPO). In DMPO all molecules show parallel orientation to the surface in such a way that the surface is formed as well as by the nitrogen atoms of the heterocyclic rings and the methyl groups of the ester substituents. By contrast, the oxadiazole molecules in DTO crystals are oriented perpendicular to the crystal surface. The experimental data are interpreted by molecular modelling. It is shown that there is a difference between molecular structure of the surface, as detected by AFM, and the bulk structure determined by X-ray diffraction.
New aromatic poly(1,3,4-oxadiazole)s were synthesized having excellent film forming properties due to their solubility in common organic solvents. The investigated new polyoxadiazoles can be used as emission material in single layer LED. The poly- oxadiazoles show an emission in the range of blue to yellow light. The external quantum efficiency as well as the turn-on voltage of the devices are influenced when blends of the polyoxadiazole with hole transport materials are used.
Poly(1,3,4-oxadiazole)s have been the focus of considerable interest with regard to the- production of high- performance materials, particularly owing to their high thermal stability in oxidative atmosphere and specific properties determined by the structure of 1,3,4-oxadiazole ring, which, from the spectral and electronic points of view, is similar to a p-phenylene structure.[1] Besides their excellent resistance to high temperature, polyoxadiazoles have many desirable characteristics, such as good hydrolytic stability, high glass transition temperatures, low dielectric constants, and tough mechanical properties. Some polyoxadiazoles have semiconductive properties, other structures can be electrochemically doped and thus made conductive, and other have liquid-crystalline properties, which make them very attractive for a wide range of high-performance applications. They exhibit excellent fiber- and film-forming capabilities, thus being considered for use as heat-resistant reinforcing fibers for advanced composite materials, highly resistant fabrics for the filtration of hot gases, special membranes for gas separation or reverse osmosis, precursors for highly oriented graphite fibers, films, and blocks to be used in the construction of electronic instruments based on X-rays, neutron beams, or a-particles, or in the construction of nuclear reactor walls. Since they were first reported in 1961,[2] a wide variety of polymers containing 1,3,4-oxadiazole rings have been synthesized, and their preparation, characterization, and physico-mechanical properties have been periodically reviewed .[3-8] This article will present a general overview of this class of polymers and will refer to the work carried out by different researchers in the last ten years with the emphasis on the potential uses of such polymers as advanced materials.
Two series of aromatic polyamides incorporating silicon together with phenylquinoxaline or with hexafluoroisopropylidene groups have been synthesized and their properties have been characterized and compared with those of related polymers. These polymers are easily soluble in polar amidic solvents such as N-rnethyl-2-pyrrolidinone and dimethylformamide, and in tetrahydrofuran, and can be cast into thin, transparent films from solution. The polyamides have weight- and number-average molecular weights in the range of 10000-40000 and 3000-6000, respectively, and polydispersities in the range of 3-10. They show glass transition temperatures in the range of 236 °C-275 °C and decomposition temperatures above 400 °C. The polymer films have low dielectric constants in the range of 3.26-3.68, and good mechanical properties (tensile strength 74-100 MPa, tensile modulus 180-386 MPa), thus being comparable with other high performance dielectrics.
A series of aromatic polyamides incorporating silicon together with phenylquinoxaline or with hexafluoroisopropylidene groups has been synthesized by solution polycondensation of a silicon-containing diacid chloride with aromatic diamines having phenylquinoxaline rings or hexafluoroisopropylidene groups. These polymers are easily soluble in polar aprotic solvents, such as N-methylpyrrolidinone and dimethylformamide, and in tetrahydrofurane, and can be solution-cast into thin, transparent films having low dielectric constant, in the range of 3.26 to 3.68. These polymers show high thermal stability with decomposition temperature being above 400 °C and glass transition temperature in the range of 236 °C to 275 °C.
The search for alternative routes of organic thin film formation is stimulated by the outstanding properties of these films in such fields as nonlinear optics, photonic data processing and molecular electronics. The formation of highly ordered multilayer structures by thermal vacuum deposition (VD) of organic compounds is an essential step toward the application of supramolecular organic architectures in technical systems. The VD of an amphiphilic substituted 2,5- diphenylene-1,3,4-oxadiazole 1 onto silicon substrates at defined temperature was used for the formation of ultrathin films. The structural data obtained for the VD-films of oxadiazole 1 by means of X-ray reflectivity, X-ray grazing incidence diffraction and atomic force microscopy (AFM) investigations indicate the formation of well ordered oxadiazole multilayers. The structure of the VD-multilayers is compared with that of Langmuir-Blodgett (LB) films and thermally treated LB-multilayers prepared from the same compound.
Crystalline 2,5-di(4-nitrophenyl)-1,3,4-oxadiazole (DNO) has been investigated at pressures up to 5 GPa using Raman and optical spectroscopy as well as energy dispersive X-ray techniques. At ambient pressure DNO shows an orthorhombic unit cell (a = 0.5448 nm, b = 1.2758 nm, c = 1.9720 nm, density 1.513 g cm-3) with an appropriate space group Pbcn. From Raman spectroscopic investigations three phase transitions have been detected at 0.88, 1.28, and 2.2 GPa, respectively. These transitions have also been confirmed by absorption spectroscopy and X-ray measurements. Molecular modeling simulations have considerably contributed to the interpretation of the X-ray diffractograms. In general, the nearly flat structure of the oxadiazole molecule is preserved during the transitions. All subsequent structures are characterized by a stack-like arrangement of the DNO molecules. Only the mutual position of these molecular stacks changes due to the transformations so that this process may be described as a topotactical reaction. Phases II and III show a monoclinic symmetry with space group P21/c with cell parameters a = 1.990 nm, b = 0.500 nm, c = 1.240 nm, ß = 91.7°, density 1.681 g cm-3 (phase II, determined at 1. 1 GPa) and a = 1.890 nm, b = 0.510 nm, C = 1.242 nm, ß = 89.0°, density 1.733 g cm-3 (phase 111, determined at 2.0 GPa), respectively. The high-pressure phase IV stable at least up to 5 GPa shows again an orthorhombic structure with space group Pccn with corresponding cell parameters at 2.9 GPa: a = 0.465 nm, b = 1.920 nm, c = 1.230 nm and density 1.857 g cm-3 . For the first phase a blue pressure shift of the onset of absorption by about 0.032 eV GPa has been observed that may be explained by pressure influences on the electronic conjugation of the molecule. In the intermediate and high-pressure phases II-IV the onset of absorption shifts to increased wavelengths due to larger intermolecular interactions and enhanced excitation delocalization with decreasing intermolecular spacing.
The molecular structure of poly(p-phenylene-1,3,4-oxadiazole) (POD) is investigated using i.r. and Raman spectroscopy. Both methods reveal characteristic differences for the a- and b-POD forms that are most obvious in the spectral region between 1500 and 1650 cm-1. The spectra for dimer and tetramer compounds already show the same features as found for longer chains. Based on molecular modelling calculations these differences are assigned to cis and trans conformations of the main chain segments. High pressure measurements show a linear shift of the Raman lines and support the result of the thermodynamic stability of the trans conformation.
Flow birefringence induced in dilute solutions of poly[(1,4-naphthylene)-2,5-diyl-1,3,4-oxadiazole] and poly[2,6-naphthylene)-2,5-diyl-1,3,4-oxadiazole] in conc. sulphuric acid has been investigated. The shear optical coefficient was found for these polymers to be approximately double the value of that obtained in the same solvent for poly[(para-phenylene) -2,5-diyl-1,3,4-oxadiazole]. Rigid-chain behaviour of the polymers was characterized by hydrodynamic and dynamo-optical parameters evaluated with application of the worm-like chain model and the "method of similar structures". Change in optical anisotropy of a chain unit induced by incorporation of naphthylene groups into the main chain has been evaluated.
Poly[(1,4-naphthalene)-2,5-diyl-1,3,4-oxadiazole] and poly[(2,6-naphthalene)-2,5-diyl-1,3,4-oxadiazole] have been synthesized and investigated in conc. H2S04, by the flow birefringence method in comparison with poly(1,4- phenylene)-2,5-diyl-1,3,4-oxadiazole]. Changes in conformation parameters and optical anisotropy of a chain unit induced by incorporation of the naphthalene groups into the macromolecule backbone have been evaluated.
Translational diffusion of the macromolecules, intrinsic viscosity and flow birefringence induced in dilute solutions of poly(1,3-phenylene-1,3,4-oxadiazole) (PMOD) in conc. sulphuric acid has been investigated. Molecular-weight dependences of hydrodynamic and dynamo-optical properties are established over the M range from 8.1 103 to 87 103. Experimental data agree well with the theories developed for translational friction and intrinsic viscosity of the wormlike chains with the following molecular parameters: mass per chain unit ML = 22.7 Dalton/Å, the Kuhn segment length A = 59 ± 4 Å, the chain diameter d = 4 ± 1.5 Å. Hindrance to intramolecular rotation is characterized by the parameter s = 1.7. The shear optical coefficient was found to be approximately 1.7 times lower the value of that obtained in the same solvent for the para-phenylene isomer of this polymer, being in good agreement with higher equilibrium flexibility of the PMOD molecule chains in solutions as determined herein from the hydrodynamic data.
The translational diffusion coefficient and intrinsic viscosity of poly(1,4-phenylene-1,3,4-oxadiazole) molecules in 96% H2S04 have been determined at different stages of degradation of the molecules in acid solution at temperature ranging from 82 to 105 °C. The degradation rate constant, k, has been obtained from the change in the molecular weight, M, of the product degraded in solution with time at high temperature. The activation energy of the hydrolysis process was 103 ± 7 kJmol-1, which is smaller than that of aromatic polyamides in the same solvent. According to our hydrodynamic data, the degree of coiling of the molecules of degraded products does not differ from that of undegraded samples, and our conclusion was that the degradation is not accompanied with a noticeable change in the short- range interactions in the molecular chain and may be understood as a random chain scission.
Translational diffusion of poly(1,4-phenylene-1,3,4-oxadiazole) in 96% H2S04 was studied, and the intrinsic viscosity of the polymer solution was measured in various stages of degradation at temperatures from 82 to 105°C. The rate constant of the degradation process was determined from variation of the molecular mass of the degradation products with time at a fixed solution temperature, and the activation energy of the process was calculated using the temperature dependence of the rate constant. The activation energy (E = 103 ± 7 kJ/mol) is lower than that for the hydrolysis of aromatic polyamides in sulfuric acid. According to the hydrodynamic data, the degree of coiling of the degradation products is the saine as that of the intact (non-degraded) macromolecules. This indicates that elements of the chernical structure responsible for the short-range order in the macromolecular chain are retained in the course of degradation.
A series of new arornatic poly(hydrazide-ester)s has been synthesized by solution polycondensation of two diacid dichlorides containing preformed ester groups with phenoxyterephthaloyl dihydrazide or with a mixture of phenoxyterephthaloyl dihydrazide with terephthaloyl- or isophthaloyl dihydrazide in N-methyl-2-pyrrolidinone. The thermal cyclization of the poly(hydrazide-ester)s gave the corresponding poly(1,3,4-oxadiazole-ester)s containing pendent phenoxy groups. The polymers were characterized by viscometry, solubility measurements, IR spectroscopy, differential scanning calorimetry and thermogravimetric analysis.
The electrochemical behaviour of new amphiphilic 1,3,4-oxadiazoles were studied by cyclic voltammetry. The influence of the supra- molecular structure on the redox behaviour in liquid or solid solutions, in Langmuir-Blodgett multilayers, and in amorphous films is investigated in detail. The reversible reduction of amphiphilic 2,5-diarylene- 1,3,4-oxadiazoles is significantly influenced by substituents in the para position of the phenylene ring. In the solid states the reduction peak potentials are shifted to more negative values compared to data measured in solution. This shift increases as the film thickness is increased. An influence of the supramolecular order in the solid films was not found. In-situ UV-vis spectroelectrochemistry of LB-multilayers deposited onto indium tin oxide (ITO) glass give evidence for the formation of radical anions in the highly ordered layer.
Aromatic polyamides containing silicon and phenylquinoxaline rings in the main chain have been prepared by polycondensation reaction of a silicon-containing diacid chloride, namely bis(p-chlorocarbonylphenyl) -diphenylsilane, with various aromatic diamines having preformed phenylquinoxaline units. These polymers were easily soluble in polar aprotic solvents, such as N-methylpyrrolidinone (NMP) and dimethylformamide (DMF), and in tetrahydrofurane. They showed high thermal stability with decomposition temperature being above 450°C and glass transition temperature in the range of 253-304°C. Polymer solutions in NMP were processed into thin films having the thickness of tens of nanometer to 10 mm, by spin-coating onto glass plates or silicon wafers. The films had strong adhesion to substrates and exhibited very smooth surfaces, free of pinholes, in atomic force microscopy (AFM) studies. The free-standing films had dielectric constant in the range of 3.48-3.69. Thermal treatment of the films up to 350°C rendered them completely insoluble in organic solvents, while maintaining their smoothness and strong adhesion to the silicon substrate, and with no Tg in DSC experiments. Their FTIR spectra did not show any changes compared to the untreated films, meaning that polymers maintain their structural integrity at high temperature. Ó 1999 Elsevier Science S.A. All rights reserved.