Refine
Year of publication
Document Type
- Article (84)
- Monograph/Edited Volume (13)
- Postprint (8)
- Doctoral Thesis (7)
- Conference Proceeding (2)
Is part of the Bibliography
- no (114) (remove)
Keywords
- Curriculum Framework (34)
- European values education (34)
- Europäische Werteerziehung (34)
- Familie (34)
- Family (34)
- Lehrevaluation (34)
- Studierendenaustausch (34)
- Unterrichtseinheiten (34)
- curriculum framework (34)
- lesson evaluation (34)
Institute
- Institut für Umweltwissenschaften und Geographie (114) (remove)
River reaches protected by dikes exhibit high damage potential due to strong value accumulation in the hinterland areas. While providing an efficient protection against low magnitude flood events, dikes may fail under the load of extreme water levels and long flood durations. Hazard and risk assessments for river reaches protected by dikes have not adequately considered the fluvial inundation processes up to now. Particularly, the processes of dike failures and their influence on the hinterland inundation and flood wave propagation lack comprehensive consideration. This study focuses on the development and application of a new modelling system which allows a comprehensive flood hazard assessment along diked river reaches under consideration of dike failures. The proposed Inundation Hazard Assessment Model (IHAM) represents a hybrid probabilistic-deterministic model. It comprises three models interactively coupled at runtime. These are: (1) 1D unsteady hydrodynamic model of river channel and floodplain flow between dikes, (2) probabilistic dike breach model which determines possible dike breach locations, breach widths and breach outflow discharges, and (3) 2D raster-based diffusion wave storage cell model of the hinterland areas behind the dikes. Due to the unsteady nature of the 1D and 2D coupled models, the dependence between hydraulic load at various locations along the reach is explicitly considered. The probabilistic dike breach model describes dike failures due to three failure mechanisms: overtopping, piping and slope instability caused by the seepage flow through the dike core (micro-instability). The 2D storage cell model driven by the breach outflow boundary conditions computes an extended spectrum of flood intensity indicators such as water depth, flow velocity, impulse, inundation duration and rate of water rise. IHAM is embedded in a Monte Carlo simulation in order to account for the natural variability of the flood generation processes reflected in the form of input hydrographs and for the randomness of dike failures given by breach locations, times and widths. The model was developed and tested on a ca. 91 km heavily diked river reach on the German part of the Elbe River between gauges Torgau and Vockerode. The reach is characterised by low slope and fairly flat extended hinterland areas. The scenario calculations for the developed synthetic input hydrographs for the main river and tributary were carried out for floods with return periods of T = 100, 200, 500, 1000 a. Based on the modelling results, probabilistic dike hazard maps could be generated that indicate the failure probability of each discretised dike section for every scenario magnitude. In the disaggregated display mode, the dike hazard maps indicate the failure probabilities for each considered breach mechanism. Besides the binary inundation patterns that indicate the probability of raster cells being inundated, IHAM generates probabilistic flood hazard maps. These maps display spatial patterns of the considered flood intensity indicators and their associated return periods. Finally, scenarios of polder deployment for the extreme floods with T = 200, 500, 1000 were simulated with IHAM. The developed IHAM simulation system represents a new scientific tool for studying fluvial inundation dynamics under extreme conditions incorporating effects of technical flood protection measures. With its major outputs in form of novel probabilistic inundation and dike hazard maps, the IHAM system has a high practical value for decision support in flood management.
Ziel dieser Arbeit war es, die Stickstoff- und Phosphorprozesse im nordostdeutschen Tiefland detailliert zu untersuchen und Handlungsoptionen hinsichtlich der Landnutzung zur nachhaltigen Steuerung der Stickstoff- und Phosphoreinträge in die Fließgewässer aufzuzeigen. Als Grundvoraussetzung für die Modellierung des Nährstoffhaushaltes mussten zunächst die hydrologischen Prozesse und die Abflüsse für die Einzugsgebiete validiert werden. Dafür wurde in dieser Arbeit das ökohydrologische Modell SWIM verwendet. Die Abflussmodellierung umfasste den Zeitraum 1991 - 2000. Die Ergebnisse dazu zeigen, dass SWIM in der Lage war, die hydrologischen Prozesse in den Untersuchungsgebieten adäquat wiederzugeben. Auf der Grundlage der Modellierung des Wasserhaushaltes wurden mit SWIM die Stoffumsatzprozesse für den Zeitraum 1996 - 2000 simuliert. Um dabei besonders das Prozessgeschehen im Tiefland zu berücksichtigen, war die Erweiterung von SWIM um einen Ammonium-Pool mit dessen Umsatzprozessen erforderlich. Außerdem wurde der Prozess der Nährstoffversickerung so ergänzt, dass neben Nitrat auch Ammonium und Phosphat durch das gesamte Bodenprofil verlagert und über die Abflusskomponenten zum Gebietsauslass transportiert werden können. Mit diesen Modellerweiterungen konnten die Stickstoff und Phosphorprozesse in den Untersuchungsgebieten gut abgebildet werden. Mit dem so validierten Modell wurden weitere Anwendungen ermöglicht. Nährstoffsimulationen für den Zeitraum 1981 bis 2000 dienten der Untersuchung des abnehmenden Trends in den Nährstoffkonzentrationen der Nuthe. Die Untersuchungsergebnisse lassen deutlich erkennen, dass sich die Konzentrationen nach 1990 hauptsächlich auf Grund der Reduzierung der Einträge aus punktförmigen Quellen und Rieselfeldern verringert haben. Weitere Modellrechnungen zur Herkunft der Nährstoffe haben ergeben, dass Nitrat überwiegend aus diffusen Quellen, Ammonium und Phosphat dagegen aus punktförmigen Quellen stammen. Als besonders sensitiv auf die Modellergebnisse haben sich die Parameter zu Landnutzung und -management und die Durchwurzelungstiefe der Pflanzen herausgestellt. Abschließend wurden verschiedene Landnutzungsszenarien angewendet. Die Ergebnisse zu den Szenariorechnungen zeigen, dass fast alle vorgegebenen Landnutzungsszenarien zu einer Verringerung der Stickstoff- bzw. Phosphoremissionen führten. Die Anwendung von Szenarien, die alle relevanten Zielvorgaben und Empfehlungen zum Ressourcenschutz berücksichtigen, zeigen die größten Veränderungen.
This thesis aims to quantify the human impact on the natural resource water at the landscape scale. The drivers in the federal state of Brandenburg (Germany), the area under investigation, are land-use changes induced by policy decisions at European and federal state level. The water resources of the federal state are particularly sensitive to changes in land-use due to low precipitation rates in the summer combined with sandy soils and high evapotranspiration rates. Key elements in landscape hydrology are forests because of their unique capacity to transport water from the soil to the atmosphere. Given these circumstances, decisions made at any level of administration that may have effects on the forest sector in the state are critical in relation to the water cycle. It is therefore essential to evaluate any decision that may change forest area and structure in such a sensitive region. Thus, as a first step, it was necessary to develop and implement a model able to simulate possible interactions and feedbacks between forested surfaces and the hydrological cycle at the landscape scale. The result is a model for simulating the hydrological properties of forest stands based on a robust computation of the temporal and spatial LAI (leaf area index) dynamics. The approach allows the simulation of all relevant hydrological processes with a low parameter demand. It includes the interception of precipitation and transpiration of forest stands with and without groundwater in the rooting zone. The model also considers phenology, biomass allocation, as well as mortality and simple management practices. It has been implemented as a module in the eco-hydrological model SWIM (Soil and Water Integrated Model). This model has been tested in two pre-studies to verify the applicability of its hydrological process description for the hydrological conditions typical for the state. The newly implemented forest module has been tested for Scots Pine (Pinus sylvestris) and in parts for Common Oak (Quercus robur and Q. petraea) in Brandenburg. For Scots Pine the results demonstrate a good simulation of annual biomass increase and LAI in addition to the satisfactory simulation of litter production. A comparison of the simulated and measured data of the May sprout for Scots pine and leaf unfolding for Oak, as well as the evaluation against daily transpiration measurements for Scots Pine, does support the applicability of the approach. The interception of precipitation has also been simulated and compared with weekly observed data for a Scots Pine stand which displays satisfactory results in both the vegetation periods and annual sums. After the development and testing phase, the model is used to analyse the effects of two scenarios. The first scenario is an increase in forest area on abandoned agricultural land that is triggered by a decrease in European agricultural production support. The second one is a shift in species composition from predominant Scots Pine to Common Oak that is based on decisions of the regional forestry authority to support a more natural species composition. The scenario effects are modelled for the federal state of Brandenburg on a 50m grid utilising spatially explicit land-use patterns. The results, for the first scenario, suggest a negative impact of an increase in forest area (9.4% total state area) on the regional water balance, causing an increase in mean long-term annual evapotranspiration of 3.7% at 100% afforestation when compared to no afforestation. The relatively small annual change conceals a much more pronounced seasonal effect of a mean long-term evapotranspiration increase by 25.1% in the spring causing a pronounced reduction in groundwater recharge and runoff. The reduction causes a lag effect that aggravates the scarcity of water resources in the summer. In contrast, in the second scenario, a change in species composition in existing forests (29.2% total state area) from predominantly Scots Pine to Common Oak decreases the long-term annual mean evapotranspiration by 3.4%, accompanied by a much weaker, but apparent, seasonal pattern. Both scenarios exhibit a high spatial heterogeneity because of the distinct natural conditions in the different regions of the state. Areas with groundwater levels near the surface are particularly sensitive to changes in forest area and regions with relatively high proportion of forest respond strongly to the change in species composition. In both cases this regional response is masked by a smaller linear mean effect for the total state area. Two critical sources of uncertainty in the model results have been investigated. The first one originates from the model calibration parameters estimated in the pre-study for lowland regions, such as the federal state. The combined effect of the parameters, when changed within their physical meaningful limits, unveils an overestimation of the mean water balance by 1.6%. However, the distribution has a wide spread with 14.7% for the 90th percentile and -9.9% for the 10th percentile. The second source of uncertainty emerges from the parameterisation of the forest module. The analysis exhibits a standard deviation of 0.6 % over a ten year period in the mean of the simulated evapotranspiration as a result of variance in the key forest parameters. The analysis suggests that the combined uncertainty in the model results is dominated by the uncertainties of calibration parameters. Therefore, the effect of the first scenario might be underestimated because the calculated increase in evapotranspiration is too small. This may lead to an overestimation of the water balance towards runoff and groundwater recharge. The opposite can be assumed for the second scenario in which the decrease in evapotranspiration might be overestimated.
Arbeitsgruppe Internet
(1999)
Ethologie und Umweltbildung
(1998)
Umweltbildung im Cyberspace
(1999)
Predictability of hydrologic response at the plot and catchment scales: Role of initial conditions
(2004)
This paper examines the effect of uncertain initial soil moisture on hydrologic response at the plot scale (1 m2) and the catchment scale (3.6 km2) in the presence of threshold transitions between matrix and preferential flow. We adopt the concepts of microstates and macrostates from statistical mechanics. The microstates are the detailed patterns of initial soil moisture that are inherently unknown, while the macrostates are specified by the statistical distributions of initial soil moisture that can be derived from the measurements typically available in field experiments. We use a physically based model and ensure that it closely represents the processes in the Weiherbach catchment, Germany. We then use the model to generate hydrologic response to hypothetical irrigation events and rainfall events for multiple realizations of initial soil moisture microstates that are all consistent with the same macrostate. As the measures of uncertainty at the plot scale we use the coefficient of variation and the scaled range of simulated vertical bromide transport distances between realizations. At the catchment scale we use similar statistics derived from simulated flood peak discharges. The simulations indicate that at both scales the predictability depends on the average initial soil moisture state and is at a minimum around the soil moisture value where the transition from matrix to macropore flow occurs. The predictability increases with rainfall intensity. The predictability increases with scale with maximum absolute errors of 90 and 32% at the plot scale and the catchment scale, respectively. It is argued that even if we assume perfect knowledge on the processes, the level of detail with which one can measure the initial conditions along with the nonlinearity of the system will set limits to the repeatability of experiments and limits to the predictability of models at the plot and catchment scales.