Refine
Has Fulltext
- no (57)
Year of publication
Document Type
- Article (55)
- Doctoral Thesis (1)
- Review (1)
Is part of the Bibliography
- yes (57)
Keywords
- Biomaterial (1)
- Degradable polymer (1)
- Enzymatic degradation (1)
- Hydrolytic degradation (1)
- Monolayer (1)
Langmuir monolayer degradation (LMD) experiments with polymers possessing outstanding biomedical application potential yield information regarding the kinetics of their hydrolytic or enzymatic chain scission under well-defined and adjustable degradation conditions. A brief review is given of LMD investigations, including the author's own work on 2-dimensional (2D) polymer systems, providing chain scission data, which are not disturbed by simultaneously occurring transport phenomena, such as water penetration into the sample or transport of scission fragments out of the sample.
A knowledge-based approach for the description and simulation of polymer hydrolytic and enzymatic degradation based on a combination of fast LMD experiments and computer simulation of the water penetration is briefly introduced. Finally, the advantages and disadvantages of this approach are discussed.
The influence of the subphase temperature on the stripe pattern formation during Langmuir-Blodgett transfer (LB patterning) is investigated in a combined experimental and theoretical study. According to our experiments on the LB transfer of dipalmitoylphosphatidylcholine (DPPC) on planar mica substrates, even small temperature changes between 21.5 and 24.5 degrees C lead to significant changes in the monolayer patterns. For a constant surface pressure and dipper speed, the width of the stripes and the overall spatial period of the patterns increase with increasing subphase temperature. Because the stripe patterns are ascribed to alternating monolayer domains in the liquid-expanded and the liquid-condensed phases, the working regime for the formation of stripes is found to depend strongly on the respective surface pressure-area isotherm. These experimental findings are in accordance with the results of a theoretical investigation based on a model that takes hydrodynamics and the monolayer thermodynamics into account.
New amphiphilic compounds 1-9 that feature a construction with dendronized hydrophilic and hydrophobic segment groups connected to a specific aromatic or aliphatic spacer unit have been synthesized, following a modular building block strategy. The hydrophilic dendrons are typically branched elements with peripheral carboxylic groups, unlike the hydrophobic dendrons that contain peripheral alkyl chains as part of respective amide functions. The hydrophilic dendrons are in different generations of branching, while the hydrophobic dendrons are all in the first generation of branching (three terminal branching), but differ in the length of the alkyl chains, thus giving rise to designed structure and amphiphilic properties in the new compounds. The resulting surfactants are capable of forming well-defined Langmuir films of remarkable stability when spread from a solution onto an aqueous subphase. Nevertheless, specific packing behaviour and orientation of the amphiphilic molecules were found, depending on the molecular structure, as determined using analysis of the surface pressure-area (pi-A) isotherms. Langmuir-Blodgett transfer of the first monolayer from a pure water subphase to a clean silicon wafer proved possible for the amphiphiles of peripheral alkyl chain length C-12, while the amphiphiles with the longer alkyl chains failed, possibly due to the more rigid monolayers they form, impeding the transfer.
The surfaces of ordered films formed from an amphiphilic derivative of 2,5-diphenyl-1,3,4-oxadiazole by the Langmuir-Blodgett (LB) technique and organic molecular beam deposition (OMBD) were investigated by the use of near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. For the assignment of the spectral features of the C, N, and O K- edge absorption spectra, fingerprint spectra of poly(p-phenylene terephthalamide)(Kevlar), poly(ethylene terephthalate), poly(p-phenylene-1,3,4-oxadiazole), and 2,5-di- (pentadecyl)-1,3,4-oxadiazole, which contain related chemical moieties, were recorded. Ab initio molecular orbital calculations, performed with explicit treatment of the core hole, are used to support the spectral interpretations. Angle-resolved NEXAFS spectroscopy at the C, N, and O K-edges suggests a preferentially upright orientation of the oxadiazole derivative in the outermost layer of the films. X-ray specular reflectivity data and molecular modeling results suggest a similar interpretation.
The search for alternative routes of organic thin film formation is stimulated by the outstanding properties of these films in such fields as nonlinear optics, photonic data processing and molecular electronics. The formation of highly ordered multilayer structures by thermal vacuum deposition (VD) of organic compounds is an essential step toward the application of supramolecular organic architectures in technical systems. The VD of an amphiphilic substituted 2,5- diphenylene-1,3,4-oxadiazole 1 onto silicon substrates at defined temperature was used for the formation of ultrathin films. The structural data obtained for the VD-films of oxadiazole 1 by means of X-ray reflectivity, X-ray grazing incidence diffraction and atomic force microscopy (AFM) investigations indicate the formation of well ordered oxadiazole multilayers. The structure of the VD-multilayers is compared with that of Langmuir-Blodgett (LB) films and thermally treated LB-multilayers prepared from the same compound.
We have formed Y layers of perfluorododecanoic acid CF3(CF2)10COOH by thermal evaporation in vacuo and of perfluorotetradecanoic acid CF3(CF2)12COOH by thermal evaporation and by the Langmuir-Blodgett (LB) technique. We have obtained the bilayer spacing of both these materials by X-ray diffraction and have also studied the in-plane structure of these materials by means of grazing incidence diffraction (GID). Computer modelling was used to interpret the results obtained. For the perfluorododecanoic acid, we find two stable untwisted phases at 25°C and a combination of these two predicts both the Bragg peaks arising from the layer structure and the GID results. Our experimental results show that the perfluorotetradecanoic acid exists in the generally accepted helical structure. Computer modelling leads to the conclusion that closely packed perfluorinated chains with 12 or less carbon atoms should exist in an untwisted state while molecules having more than 12 carbon atoms show the onset of the helical conformation.
Investigation of molecular diffusion across organic multilayers using neutron specular reflectivity
(1999)
Langmuir floating layers of two phthalocyanine derivatives, ytterbium bisphthalocyanine and tetra-tert-butyl nickel phthalocyanine, were investigated by means of compression isotherms, surface potential kinetics and Brewster angle microscopy (BAM) in order to study the influence of peripheral substituents on the structure and stability of these films and on their suitability for a subsequent transfer onto solid substrates. Specific substitutions that may lead to amphiphilic molecular units seem to play a key role in the development of well organised thin films prepared with this technique.
Grazing incidence x-ray diffraction (GIXD) measurements of uranyl arachidate (UO2A2) LB films
(1998)
The influence of polyelectrolytes on structure formation in liquid crystalline Na-dodecylsulfate/decanol/water systems was investigated by means of small angle X-ray diffraction, rheology, NMR spectroscopy, and microscopy. By adding Na-polyacrylate (PAA) into the mesophase, the one-phase region is left and phenomena of phase separation into a solvent-rich and a polymer/surfactantrich phase occurs. By incoporating an anionic and cationic polyelectrolyte step by step the tendency of phase separation is increased drastically. The self-organization process can be regulated directly by varying the water content of the system. However, at a water content of 30% the properties of the resulting liquid crystal were changed drastically. X-ray diffraction shows a multitude of Bragg peaks, NMR shows a peak-splitting, and rheology shows a change from non-Newtonian to Newtonian-flow behavior. On the basis of the experimental results an ordered multilayer associate structure can be assumed.
The pendant drop technique was used to determine p/A isotherms of docosanic acid spread on the drop surface of an aqueous polymer solution. Two water soluble polymers were used, poly(dimethyl-diallyl-ammoniumchloride) and sodium poly(styrene sulfonate-b-ethylethylene). By fast changes of the drop volume, the monolayers were compressed and dilated. The stress relaxation was monitored and surface rheological dilation parameters were obtained. It is shown that the fatty acid monolayer can be mechanically stabilized by both interacting anionic and cationic polymers. In the case of the anionic polymer, the interaction becomes more pronounced in the presence of salts in the subphase (counterions). Brewster angle microscopy shows that the typical tilt-orientation of crystalline domains of the fatty acid monolayers transforms into a more uniform and fluid-like structure caused by the polymer/monolayer interaction. The surface rheological behavior is dramatically influenced by the polymer binding. The interaction results in surface dilational viscoelastic properties and show that there is a strong resistance against expansion of the complex fatty acid/polymer layer.
Langmuir-Blodgett films of zinc 11,18,25-tri(tert-butyl)-4-sulfo-phthalocyanine (ZNPctSO3Na) have been deposited onto hydrophilic and hydrophobic silicon wafers. Y-type films were formed on both types of substrate, and the transfer ratio was very close to unity. The organization of the films on the molecular level was probed by X-ray specular reflectivity.
The molecular in-plane structure of uranyl arachidate Langmuir-Blodgett (LB) films formed at different subphase pH values was analysed by means of X-ray grazing-incidence diffraction. For multilayers formed at low subphase pH a reorganisation of the arachidic acid film structure is confirmed. At appropriate subphase pH values, reorganisation of the film structure, e.g. via the formation of three-dimensional crystallites, is prevented by the presence of the uranyl ions and by the subsequent introduction of conformational disorder (gauche defects) in the alkyl chains. The observation of a macroscopic flow-induced in-plane texture in these uranyl arachidate LB films has profound implications for the design of ordered, supramolecular structures by the Langmuir-Blodgett technique.
The thermal treatment of Y-type Langmuir-Blodgett (LB) films formed from the amphiphilic derivative of 2,5- diphenyl-1,3,4-oxadiazole 1 results in changes of the molecular packing. These changes have been analysed by a combination of X-ray specular reflectivity data, X-ray grazing incidence diffraction data and scanning force microscopy images, On the basis of these experimental data we have simulated possible supramolecular structures, These simulations provide insight into the intermolecular interactions giving rise to the observed structural transitions. The crystalline structure induced by thermal treatment of the LB films is characterized by a uniaxial texture, which is correlated with the dipping direction during deposition of the LB film.
The complexation of highly ordered fatty acid monolayers with polyelectrolytes is expected to yield well- ordered Langmuir films suitable for the formation of Langmuir-Blodgett multilayers with improved long-term stability. Studies of the surface pressure-area isotherms and of the surface potential kinetics yield detailed information regarding the influence of these polymeric counterions on the monolayer properties. The injection of bivalent metal salts into the subphase after the complexation was used to improve the order and stability of the mono- and multilayers. The corresponding Langmuir-Blodgett films were investigated by means of X-ray reflectivity measurements and scanning force microscopy. The polyion complex multilayers show a strongly increased mechanical stability compared with films of fatty acid salts formed with bivalent metal ions. These structures are expected to be suitable as ultrathin separation layer for gas separation or ultrafiltration membranes.
This paper describes the formation and structure investigation of Langmuir monolayers and Langmuir-Blodgett multilayers formed from amphiphilic derivatives of 2,5-diphenyl-1,3,4-oxadiazole. The 2,5-diphenyl-1,3,4-oxadiazole group as a functional unit with interesting physical and chemical properties is maintained, while the head group, the length of the alkyl chain and the structure of the coupling unit between aromatic and aliphatic part of these linear short-chain amphiphiles is systematically varied in order to explore the influence of this change on the film forming properties and the stability of Langmuir and Langmuir-Blodgett films. Molecular mechanics simulations are shown by these systematic variations to be suitable for the prediction of optimal chemical structures allowing for a stable stratified molecular packing. The combination of a detailed structure investigation of the multilayers based on scanning force microscopy and X-ray data with molecular mechanics simulations yields an insight into the packing of the molecules and the intermolecular interactions.
Langmuir-Blodgett films of bolaamphiphiles with reactive head groups can be used for the surface modification of composite membranes for gas separation processes. The scope of our investigations was to get a detailed insight in the monolayer behaviour and LB film structure of previously synthesized bisaroyl azide bolaamphiphiles. The layers have been analyses by means of surface potential measurements and Brewster angle microscopy. Furthermore parameters for a successful LB Film deposition were found. As expected for a molecule with two hydrophilic ends the transfer ratio on upstroke was close to one and on downstroke no transfer occurred. The multilayer structure was analysed by scanning force microscopy and X-ray reflectivity measurements. The SFM images revealed a periodic in plane structure on molecular level. Based on a combination of the X-ray data with results of other methods two possible models of the multilayer structure are presented