Filtern
Erscheinungsjahr
- 2006 (91) (entfernen)
Dokumenttyp
- Wissenschaftlicher Artikel (64)
- Dissertation (18)
- Postprint (8)
- Sonstiges (1)
Schlagworte
- polyelectrolyte (4)
- Fluoreszenz-Resonanz-Energie-Transfer (3)
- Immunoassay (3)
- Nanopartikel (3)
- microemulsion (3)
- Energietransfer (2)
- FRET (2)
- Lumineszenz (2)
- Quantenpunkt (2)
- nanoparticles (2)
Institut
- Institut für Chemie (91) (entfernen)
The influence of branched poly(ethyleneimine) on the phase behavior of the system sodium dodecylsulfate/toluene-pentanol (1:1)/water has been studied. The isotropic microemulsions still exist when water is replaced with aqueous solutions of PEI (up to 30% in weight), but their stability is significantly influenced. From a polymer concentration of 20 wt%, the polymer enhances the solubilization of water in oil, changes the sign of the spontaneous curvature of the surfactant film, and induces an inversion of the microemulsion type from water-in-oil (L-2) to oil-in-water (L-1), by the formation of a bicontinuous channel. Further investigations show that the addition of polymer in the L-2 phase changes the droplet-droplet interactions as the conductivity drops and the percolation disappears. In the bicontinuous channel, higher viscosities can be detected, as well as a weak percolation followed by a steep increase of the conductivity, which can be related to evident structural changes in the system. DSC measurements allow then to follow the changes of the water properties in the system, from interfacial-water in the L-2 phase to free-water in the sponge-like phase. Finally, all the measurements performed permit to characterize the structural transitions in the system and to understand the role of the added polymer.
The nanostructuring of ORMOCER (R) to form inverse opals is described. For this purpose a polymer opal is used as a template and infiltrated with liquid ORMOCER (R). After photopolymerization of the resin the host opal is dissolved in tetrahydrofuran and an ORMOCER (R) inverse opal is obtained. It shows excellent periodicity (by SEM) and optical properties to reveal a high degree of face centered cubic order. This replication process leads to a nanostructured photonic crystal with the outstanding mechanical properties of ORMOCER (R) and high temperature stability up to 350 degrees C.
A cysteine mutant of a monomeric human Cu, Zn-SOD (Glycine 61, Serine 142) has been immobilized directly on gold electrodes using the thiol groups introduced. The electrochemical behavior of the surface confined protein was studied in mixtures of aqueous buffer and DMSO up to an organic solvent content of 60%. The formal potential was found to be rather independent of the DMSO content. However, half peak width increased and the redoxactive amount clearly decreased with raising DMSO content. In addition, the kinetics of the heterogeneous electron transfer became slower; but still a quasireversible electrochemical conversion of the mutant SOD was feasible. Thus, the electrodes were applied for sensorial superoxide detection. At a potential of +220 mV vs. Ag/AgCl advantage was taken of the partial oxidation reaction of the enzyme. A defined superoxide signal was obtained in solutions up to 40% DMSO. The sensitivity of the mutant electrodes decreased linearly with the organic solvent content in solution but was still higher compared to conventional cyt.c based sensors. At DMSO concentrations higher than 40% no sensor response was detected.
Water-soluble, amphiphilic diblock copolymers were synthesized by reversible addition fragmentation chain transfer polymerization. They consist of poly(butyl acrylate) as hydrophobic block with a low glass transition temperature and three different nonionic water-soluble blocks, namely, the classical hydrophilic block poly(dimethylacrylamide), the strongly hydrophilic poly(acryloyloxyethyl methylsulfoxide), and the thermally sensitive poly(N-acryloylpyrrolidine). Aqueous micellar solutions of the block copolymers were prepared and characterized by static and dynamic light scattering analysis (DLS and SLS). No critical micelle concentration could be detected. The micellization was thermodynamically favored, although kinetically slow, exhibiting a marked dependence on the preparation conditions. The polymers formed micelles with a hydrodynamic diameter from 20 to 100 nm, which were stable upon dilution. The micellar size was correlated with the composition of the block copolymers and their overall molar mass. The micelles formed with the two most hydrophilic blocks were particularly stable upon temperature cycles, whereas the thermally sensitive poly(N-acryloylpyrrolidine) block showed a temperature-induced precipitation. According to combined SLS and DLS analysis, the micelles exhibited an elongated shape such as rods or worms. It should be noted that the block copolymers with the most hydrophilic poly(sulfoxide) block formed inverse micelles in certain organic solvents.
The fabrication of compartmented micellar systems is an exciting new area of research in the field of polymer self-assembly. Multicompartment micelles composed of a water-soluble shell and a segregated hydrophobic core can be obtained via direct aqueous self-assembly of preformed polymeric amphiphiles possessing one hydrophilic segment and two incompatible hydrophobic segments (e.g. hydrocarbon and fluorocarbon blocks). Such macromolecular building-blocks were prepared in the present work principally via reversible addition-fragmentation transfer polymerization (RAFT). Polysoaps or triblock macrosurfactants can be synthesized in high yields by RAFT under relatively straightforward experimental conditions.
The trans diesters of 1,4-cyclohexanediol with a number of acetic acid analogues, CX3COOH, of varying steric hindrance and polarity (CX3 = Me, Et, iso-Pr, tert-Bu, CF3, CH2Cl, CHCl2, CCl3, CH2Br, CHBr2, CBr3) were synthesized, and the axial, axial/equatorial, equatorial conformational equilibria were studied by low-temperature H-1 NMR spectroscopy in CD2Cl2. The structures and relative energies of the axial, axial and equatorial, equatorial conformers were calculated at both the MP2/6-311G* and the MP2/6-311+G* levels of theory, and it was only by including diffuse functions that a good correlation of Delta G degrees(calcd) vs Delta G(exptl) could be obtained. Both the structures and the energy differences of the axial, axial and equatorial, equatorial conformers are discussed with respect to the established models of conformational analysis, viz., steric 1,3-diaxial and hyperconjugative interactions. Interestingly, the hyperconjugative interactions sigma(C-C)/sigma(C-H)->sigma*(C-O), together with a steric effect which also destabilizes the equatorial, equatorial conformers on increasing bulk of the substituents, proved to dominate the position of the conformational equilibria. In addition, the preference of the axial, axial conformers with respect to their equatorial, equatorial analogues was greater than expected from the conformational energies of the corresponding substituents in the monosubstituted cyclohexyl esters. The reason for this very interesting and unexpected result is also discussed
In this work, ion mobility (IM) spectra of more than 50 aromatic compounds were recorded with a laser-based IM spectrometer at atmospheric pressure. IM spectra of PAH in the laser desorption experiment show a high complexity resulting from the occurrence of monomeric, dimeric, and oligomeric cluster ions. The mobilities of all compounds were determined in helium as drift gas. This allows the calculation of the diffusion cross sections (Omega(calc)) on the basis of the exact hard sphere scattering model and their comparison with the experimentally determined diffusion cross sections (Omega(exp)). Extended Omega(exp)/Omega(calc) and Omega(exp/)mass correlations were performed in order to gain insight into conformational properties of cationic alkyl benzenes and internal rotation of phenyl rings in aromatic ions. This is demonstrated with some examples, such as the evaluation of the dihedral angle of the ions of 9,10- diphenylanthracene, o- and m-terphenyl, and 1,2,3- and 1,3,5-triphenylbenzene. Furthermore, sandwich and T-structures of dimeric PAH cations are discussed. The analysis was extended to oligomeric ions with up to nine monomer units. Experimental evidence is presented suggesting the formation of pi-stacks with a transition toward modified pi-stacks with increasing cluster size. The distance between monomeric units in dimeric and oligomeric ions was obtained
We report here for the first time on surface immobilization of hollow faceted polyhedrons formed from catanionic surfactant mixtures. We find that electrostatic interaction with the substrate dominates their adhesion behavior. Using polyelectrolyte coated surfaces with tailored charge densities, polyhedrons can thus be immobilized without complete spreading, which allows for further study of their mechanical properties using AFM force measurements. The elastic response of individual polyhedrons can be locally resolved, showing pronounced differences in stiffness between faces and vertexes of the structure, which makes these systems interesting as models for structurally similar colloidal scale objects such as viruses, where such effects are predicted but cannot be directly observed due to the smaller dimensions. Elastic constants of the wall material are estimated using shell and plate deformation models and are found to be a factor of 5 larger than those for neutral lipidic bilayers in the gel state. We discuss the molecular origins of this high stiffness
The crystal and molecular structures of sodium and barium complexes of dibenzo-24-crown-8 ether
(2006)
The sodium and barium isothiocyanate complexes of 6,7,9,10,12,13,20,21,23,24,26,27-dodecahydrodibenzo[b,n]- 1,4,7,10,13,16,19,22-octaoxacyclotetracosin (dibenzo-24-crown-8 ether = DB24C8) were synthesized and analyzed by X-ray diffraction. The sodium complex, [Na(DB24C8)(NCS)(H2O)] 1, crystallizes in the orthorhombic space group Fdd2 with 16 molecules in the unit cell. The coordination number of Na is 6 and the central ion is located in a distorted octahedric environment. Only four of the crown ether oxygen atoms are involved. The coordination polyhedron is completed by the isothiocanate anion and by a water molecule, which is stabilized by hydrogen bonds. The barium complex, [Ba(DB24C8)(NCS)(2)] 2, crystallizes in the trigonale space group P3(1)21 with 3 molecules in the unit cell. Crystallographic C-2 symmetry is observed for the complex. The coordination number of Ba is 10. Barium is coordinated with the eight oxygen atoms of the macrocyclic ligand and with two isothiocyanate anions. The absolute structure was estimated using the FLACK parameter
The regioselectivities of methyl- and phenylhydrazine with acridin-9-yl isothiocyanate (thus yielding thiosemicarbazides with acridine substituted on the urea-type side) were examined. Methythydrazine regioselectivity was high with the alpha-nitrogen atom overwhelmingly more nucleophilic than the beta-nitrogen atom; phenylhydrazine regioselectivity was poor but varied with the solvent and only in the case of ethanol was nucleophilic predominance of the alpha-nitrogen atom pronounced. Of note, whilst both phenyl thiosemicarbazides were present in solution only as spiro forms, the methyl product was present as an equilibrium mixture of open-chain and spiro thiosemicarbazides. Reactions on the NH2 blocked analogue of methyl acridin-9-ylthiosemicarbazide (1-isopropylidene-2- methylthiosemicarbazide) were also examined. Interestingly, present in the starting material itself was a structural motif of novelty wherein a triazolethione represented the major species of an equilibrium between cyclic and open-chain forms
New amphiphilic diblock copolymers : surfactant properties and solubilization in their micelles
(2006)
Several series of amphiphilic diblock copolymers are investigated as macrosurfactants in comparison to reference low-molar-mass and polymeric surfactants. The various copolymers share poly(butyl acrylate) as a common hydrophobic block but are distinguished by six different hydrophilic blocks (one anionic, one cationic, and four nonionic hydrophilic blocks) with various compositions. Dynamic light scattering experiments indicate the presence of micelles over the whole concentration range from 10(-4) to 10 g(.)L(-1). Accordingly, the critical micellization concentrations are very low. Still, the surface tension of aqueous solutions of block copolymers decreases slowly but continuously with increasing concentration, without exhibiting a plateau. The longer the hydrophobic block, the shorter the hydrophilic block, and the less hydrophilic the monomer of the hydrophilic block is, the lower the surface tension is. However, the effects are small, and the copolymers reduce the surface tension much less than standard low-molar-mass surfactants. Also, the copolymers foam much less and even act as anti-foaming agents in classical foaming systems composed of standard surfactants. The copolymers stabilize O/W emulsions made of methyl palmitate as equally well as standard surfactants but are less efficient for O/W emulsions made of tributyrine. However, the copolymer micelles exhibit a high solubilization power for hydrophobic dyes, probably at their core-corona interface, in dependence on the initial geometry of the micelles and the composition of the block copolymers. Whereas micelles of copolymers with strongly hydrophilic blocks are stable upon solubilization, solubilization-induced micellar growth is observed for copolymers with moderately hydrophilic blocks
Variously substituted tolanes were employed to show that the push-pull effect is also active in C equivalent to C triple bonds by the successful correlation of the occupation quotient pi*/pi of the pi orbital in resonance with the substituted phenyl moieties of tolanes versus the bond length of the C equivalent to C triple bond. In addition, the influences of the ortho phenyl ring substituents on the C-13 chemical shifts of the triple bond carbon atoms, which were estimated by Rubin et al.(4) to be "inapplicable for describing triple bond polarization", were re-evaluated, leading to the conclusion that, while anisotropic effects of ortho substituents are negligible, the steric ortho-substituent effects do in fact dominate the deviations obtained. A detailed theoretical NBO/NCS study has been employed to illuminate the facts of this case
Different chemical and enzymatic methods were applied for the hydrolysis of main stems from Lupinus nootkatensis (harvest November 2002). The whole process (all steps) is based on the lignocellulose-feedstock biorefinery regime. The acid hydrolysis of L. was performed with concentrated hydrochloric acid; advantages in this process are exothermic hydrolysis and the possibility of acid recovery. Enzymatic hydrolysis achieved high yields of fermentable carbohydrates (regarding to input cellulose) with high selectivity. However, this way requires the generation of cellulose from L. by chemical pulping. Monosaccharide derivatives thus obtained were identified by their GC retention times and the corresponding MS fragmentation. Hexamethyldisilazane was used as derivatization reagent to prepare the trimethylsilyl derivatives of the carbohydrates and of the degradations products of cellulose from the different fractions. The glucose content was quantified by GC peak integration with respect to an internal standard.
The acinar salivary glands of cockroaches receive a dual innervation from the subesophageal ganglion and the stomatogastric nervous system. Acinar cells are surrounded by a plexus of dopaminergic and serotonergic varicose fibers. In addition, seroton-ergic terminals lie deep in the extracellulor spaces between acinar cells. Excitation-secretion coupling in cockroach salivary glands is stimulated by both dopamine and serotonin. These monoamines cause increases in the intracellular concentrations of cAMP and Ca2+. Stimulation of the glands by serotonin results in the production of a protein-rich saliva, whereas stimulation by dopamine results in saliva that is protein-free. Thus, two elementary secretary processes, namely electrolyte/water secretion and protein secretion, are triggered by different aminergic transmitters. Because of its simplicity and experimental accessibility, cockroach salivary glands have been used extensively as a model system to study the cellular actions of biogenic amines and to examine the pharmacological properties of biogenic amine receptors. In this review, we summarize current knowledge concerning the aminergic control of cockroach salivary glands and discuss our efforts to characterize Periplaneta biogenic amine receptors molecularly
A short and convenient synthesis of metallochlorin-C-60 dyads based on a Heck-type hetero coupling at the 3(2) position of a chlorin is described. p-Bromobenzaldehyde was treated with Zn-metalated 13(2)- demethoxycarbonylmethylpheophorbide a, using a palladium acetate/LiCl catalyst mixture under phase-transfer conditions in DMF at 70 degrees C. The resulting asymmetric olefin was obtained in a high trans/cis ratio. The desired trans isomer was separated and subsequently transformed into a donor-acceptor dyad by a 1,3-dipolar cycloaddition to C-60 in the presence of sarcosine in refluxing toluene. The resulting dyads are expected to undergo efficient photoinduced electron transfer and can potentially be utilized in solar energy conversion devices.
Highly fluorescent crystalline and liquid crystalline columnar phases of pyrene-based structures
(2006)
A concept for highly ordered solid-state structures with bright fluorescence is proposed: liquid crystals based on tetraethynylpyrene chromophores, where the rigid core is functionalized with flexible, promesogenic alkoxy chains. The synthesis of this novel material is presented. The therniotropic properties are studied by means of differential scanning calorimetry (DSC), cross-polarized optical microscopy (POM), and X-ray diffraction. The mesogen possesses an enantiotropic Col(h) phase over a large temperature range before clearing. The material is highly fluorescent in solution and, most remarkably, in the condensed state, with a broad, strongly red shifted emission. Fluorescence quantum yields (Phi(F)) have been determined to be 70% in dichloromethane solution and 62% in the solid state. Concentration- and temperature-dependent absorption and emission studies as well as quantum-chemical calculations on isolated molecules and dimers are used to clarify the type of intermolecular interactions present as well as their influence on the fluorescence quantum yield and spectral properties of the material. The high luminescence efficiency in the solid state is ascribed to rotated chromophores, leading to an optically allowed lowest optical transition