Refine
Year of publication
Document Type
- Article (36102)
- Doctoral Thesis (6536)
- Monograph/Edited Volume (5575)
- Postprint (3296)
- Review (2315)
- Part of a Book (1099)
- Other (973)
- Conference Proceeding (579)
- Preprint (569)
- Part of Periodical (531)
Language
- English (31132)
- German (26201)
- Spanish (365)
- French (330)
- Italian (115)
- Russian (113)
- Multiple languages (70)
- Hebrew (36)
- Portuguese (25)
- Polish (24)
Keywords
- Germany (209)
- climate change (182)
- Deutschland (146)
- machine learning (91)
- European Union (79)
- diffusion (78)
- Sprachtherapie (77)
- Migration (75)
- morphology (74)
- Logopädie (73)
Institute
- Institut für Biochemie und Biologie (5509)
- Institut für Physik und Astronomie (5471)
- Institut für Geowissenschaften (3688)
- Institut für Chemie (3494)
- Wirtschaftswissenschaften (2645)
- Historisches Institut (2528)
- Department Psychologie (2358)
- Institut für Mathematik (2160)
- Institut für Romanistik (2115)
- Sozialwissenschaften (1884)
We consider a solution of the nonlinear Klein-Gordon equation perturbed by a parametric driver. The frequency of parametric perturbation varies slowly and passes through a resonant value, which leads to a solution change. We obtain a new connection formula for the asymptotic solution before and after the resonance.
We consider a resonantly perturbed system of coupled nonlinear oscillators with small dissipation and outer periodic perturbation. We show that for the large time t similar to s(-2) one component of the system is described for the most part by the inhomogeneous Mathieu equation while the other component represents pulsation of large amplitude. A Hamiltonian system is obtained which describes for the most part the behavior of the envelope in a special case. The analytic results agree with numerical simulations.
We construct a special asymptotic solution for the forced KdV equation. In the frame of the shallow water model this kind of the external driving force is related to the atmospheric disturbance. The perturbation slowly passes through a resonance and it leads to the solution exchange. The detailed asymptotic description of the process is presented.
Jüdisches Selbstverständnis im Wandel : jiddische Literatur zu Beginn des zwanzigsten Jahrhunderts
(1999)
Homopolymers of N-acryloyl glycinamide were prepared by reversible addition-fragmentation chain transfer polymerization in water. The formed macromolecules exhibit strong polymer-polymer interactions in aqueous milieu and therefore form thermoreversible physical hydrogels in pure water, physiological buffer or cell medium.
Cellulose is the most abundant biopolymer on earth. In this work it has been used, in various forms ranging from wood to fully processed laboratory grade microcrystalline cellulose, to synthesise a variety of metal and metal carbide nanoparticles and to establish structuring and patterning methodologies that produce highly functional nano-hybrids. To achieve this, the mechanisms governing the catalytic processes that bring about graphitised carbons in the presence of iron have been investigated. It was found that, when infusing cellulose with an aqueous iron salt solution and heating this mixture under inert atmosphere to 640 °C and above, a liquid eutectic mixture of iron and carbon with an atom ratio of approximately 1:1 forms. The eutectic droplets were monitored with in-situ TEM at the reaction temperature where they could be seen dissolving amorphous carbon and leaving behind a trail of graphitised carbon sheets and subsequently iron carbide nanoparticles. These transformations turned ordinary cellulose into a conductive and porous matrix that is well suited for catalytic applications. Despite these significant changes on the nanometre scale the shape of the matrix as a whole was retained with remarkable precision. This was exemplified by folding a sheet of cellulose paper into origami cranes and converting them via the temperature treatment in to magnetic facsimiles of those cranes. The study showed that the catalytic mechanisms derived from controlled systems and described in the literature can be transferred to synthetic concepts beyond the lab without loss of generality. Once the processes determining the transformation of cellulose into functional materials were understood, the concept could be extended to other metals and metal-combinations. Firstly, the procedure was utilised to produce different ternary iron carbides in the form of MxFeyC (M = W, Mn). None of those ternary carbides have thus far been produced in a nanoparticle form. The next part of this work encompassed combinations of iron with cobalt, nickel, palladium and copper. All of those metals were also probed alone in combination with cellulose. This produced elemental metal and metal alloy particles of low polydispersity and high stability. Both features are something that is typically not associated with high temperature syntheses and enables to connect the good size control with a scalable process. Each of the probed reactions resulted in phase pure, single crystalline, stable materials. After showing that cellulose is a good stabilising and separating agent for all the investigated types of nanoparticles, the focus of the work at hand is shifted towards probing the limits of the structuring and pattering capabilities of cellulose. Moreover possible post-processing techniques to further broaden the applicability of the materials are evaluated. This showed that, by choosing an appropriate paper, products ranging from stiff, self-sustaining monoliths to ultra-thin and very flexible cloths can be obtained after high temperature treatment. Furthermore cellulose has been demonstrated to be a very good substrate for many structuring and patterning techniques from origami folding to ink-jet printing. The thereby resulting products have been employed as electrodes, which was exemplified by electrodepositing copper onto them. Via ink-jet printing they have additionally been patterned and the resulting electrodes have also been post functionalised by electro-deposition of copper onto the graphitised (printed) parts of the samples. Lastly in a preliminary test the possibility of printing several metals simultaneously and thereby producing finely tuneable gradients from one metal to another have successfully been made. Starting from these concepts future experiments were outlined. The last chapter of this thesis concerned itself with alternative synthesis methods of the iron-carbon composite, thereby testing the robustness of the devolved reactions. By performing the synthesis with partly dissolved scrap metal and pieces of raw, dry wood, some progress for further use of the general synthesis technique were made. For example by using wood instead of processed cellulose all the established shaping techniques available for wooden objects, such as CNC milling or 3D prototyping, become accessible for the synthesis path. Also by using wood its intrinsic well defined porosity and the fact that large monoliths are obtained help expanding the prospect of using the composite. It was also demonstrated in this chapter that the resulting material can be applied for the environmentally important issue of waste water cleansing. Additionally to being made from renewable resources and by a cheap and easy one-pot synthesis, the material is recyclable, since the pollutants can be recovered by washing with ethanol. Most importantly this chapter covered experiments where the reaction was performed in a crude, home-built glass vessel, fuelled – with the help of a Fresnel lens – only by direct concentrated sunlight irradiation. This concept carries the thus far presented synthetic procedures from being common laboratory syntheses to a real world application. Based on cellulose, transition metals and simple equipment, this work enabled the easy one-pot synthesis of nano-ceramic and metal nanoparticle composites otherwise not readily accessible. Furthermore were structuring and patterning techniques and synthesis routes involving only renewable resources and environmentally benign procedures established here. Thereby it has laid the foundation for a multitude of applications and pointed towards several future projects reaching from fundamental research, to application focussed research and even and industry relevant engineering project was envisioned.
Isoprene and beta-myrcene were polymerized by anionic polymerization in bulk and in the 'green' ether solvents cyclopentyl methyl ether and 2-methyltetrahydrofuran and, for comparison, in cyclohexane and tetrahydrofuran. The polydienes produced in bulk and in cyclohexane contained high amounts of 1,4 units (>90%) whereas those produced in ether solvents were rich in 1,2 and 3,4 units (36%-86%). Comparison of the microstructures and glass transition temperatures of the polydienes obtained in the various solvents suggests that conventionally used solvents can be substituted by environmentally more friendly alternatives.
We report a noise-memory induced phase transition in an array of oscillatory neural systems, which leads to the suppression of synchronous oscillations and restoration of excitable dynamics. This phenomenon is caused by the systematic contributions of temporally correlated parametric noise, i.e., possessing a memory, which stabilizes a deterministically unstable fixed point. Changing the noise correlation time, a reentrant phase transition to noise- induced excitability is observed in a globally coupled array. Since noise-induced excitability implies the restoration of the ability to transmit information, associated spatiotemporal patterns are observed afterwards. Furthermore, an analytic approach to predict the systematic effects of exponentially correlated noise is presented and its results are compared with the simulations
Rezensiertes Werk: Schmid, Heiko: Der Wiederaufbau des Beiruter Stadtzentrums : ein Beitrag zur handlungsorientierten politisch-geographischen Konfliktforschung ; mit 6 Tabellen / von Heiko Schmid. Geographisches Institut der Universität Heidelberg. - Heidelberg : Geographisches Inst., 2002. - X, 284 S. : Ill., graph. Darst., Kt. - (Heidelberger geographische Arbeiten ; H. 114) Zugl.: Heidelberg, Univ., Diss., 2001 ISBN 3-88570-114-6
Criticisms of the integration of psychotherapy-outcome research performed by Smith, Glass, and Miller (1980) are reviewed and answered. An attempt is made to account for the conflicting points of view in this disagreement in terms of certain issues that have engaged philosophers of science in the 20th century. It is hoped that, in passing, something useful is learned about research of many types on psychotherapy.
This paper highlights the different ways of perceiving video games and video game content, incorporating interactive and non-interactive methods. It examines varying cognitive and emotive reactions by persons who are used to play video games as well as persons who are unfamiliar with the aesthetics and the most basic game play rules incorporated within video games. Additionally, the principle of “Flow” serves as a theoretical and philosophical foundation. A small case-study featuring two games has been made to emphasize the numerous possible ways of perception of video games.
Computerspiele-Journalismus
(2009)
Der vorliegende Aufsatz liefert eine Kurzanalyse zur Entstehung des Computer- und Videospielejournalismus in den 1980er Jahren und gliedert seine unterschiedlichen Erscheinungsformen hinsichtlich Format, kulturellem Selbstverständnis und ideologischer Ausrichtung bis zu Publikationen der Gegenwart. Dabei wird verstärkt auf textbasierte Medien aus dem deutschsprachigen Raum Bezug genommen (Print und Online).
Einleitung
(2004)
Lernwerkstätten
(2004)
Mädchenbildung
(2004)
In Anlehnung an das Self-Regulated-Strategy-Development-Modell von Harris und Graham (1996) wurde das Selbstregulatorische Aufsatztraining (SAT) zur Förderung der Schreibkompetenz bei Grundschülern der 4. und 5. Klasse entwickelt. SAT integriert die Vermittlung von Schreibstrategien (hier: „Erzählendes Schreiben“) mit Merkmalen selbstgesteuerten Lernens (Zielsetzung, strategisches Planen, Selbstbewertung und Selbstkorrektur). Die Wirksamkeit des Trainings wurde in drei Studien untersucht: 1. Eine Pilotstudie diente der Überprüfung der prinzipiellen Eignung von SAT zur Förderung von Schreibleistungen bei Grundschülern der 5. Klassen (N = 42) und der Optimierung seiner Teilkomponenten und Vorgehensweisen. 2. In der Hauptuntersuchung wurden die Effektivität und Nachhaltigkeit des SAT-Programms bei Schülern der 4. Klasse (N = 154) im Vergleich zu zwei Bedingungen getestet: (a) der isolierten Einübung von Schreibstrategien (Aufsatztraining) und (b) konventionellem Aufsatzunterricht (Unterrichtskontrollgruppe). 3. In einer weiteren Studie wurde die Wirksamkeit des Trainings speziell bei Schülern mit ungünstigen Lernvoraussetzungen überprüft; die Studie diente zudem der Illustration des dabei gewählten Vorgehens am Einzelfall (N = 6). Die ermittelten Befunde sprechen übereinstimmend dafür, dass die Kombination aus strategischem plus selbstregulatorischem Training (SAT) die stärksten und nachhaltigsten Effekte auf die Schreibleistung erzielt. Der Trainingseffekt generalisiert zudem auf die Erinnerungsleistung bei der freien Wiedergabe einer Kurzgeschichte. Schüler mit schwachen Aufsatzleistungen und ungünstigen Lernvoraussetzungen profitieren von dem SAT-Programm in besonderem Maße. In der Diskussion werden Aufgaben für die zukünftige Forschung erörtert. Forschungsbedarf besteht u.a. hinsichtlich (a) einer stärkeren Verknüpfung von Schreibtrainings mit der kognitionspsychologischen Forschung; (b) der Dekomposition und gezielten Überprüfung der einzelnen Trainingskomponenten; (c) der Ausweitung des SAT-Programms auf andere Textgenre; (d) der Integration verfeinerter Revisionsstrategien in das Förderprogramm; und (e) dessen Implementierung in den Regelunterricht.
In times of digitalization, the collection and modeling of business processes is still a challenge for companies. The demand for trustworthy process models that reflect the actual execution steps therefore increases. The respective kinds of processes significantly determine both, business process analysis and the conception of future target processes and they are the starting point for any kind of change initiatives. Existing approaches to model as-is processes, like process mining, are exclusively focused on reconstruction. Therefore, transactional protocols and limited data from a single application system are used. Heterogeneous application landscapes and business processes that are executed across multiple application systems, on the contrary, are one of the main challenges in process mining research. Using RFID technology is hence one approach to close the existing gap between different application systems. This paper focuses on methods for data collection from real world objects via RFID technology and possible combinations with application data (process mining) in order to realize a cross system mining approach.
The Paris Climate Agreement aims to keep temperature rise well below 2 degrees C. This implies mitigation costs as well as avoided climate damages. Here we show that independent of the normative assumptions of inequality aversion and time preferences, the agreement constitutes the economically optimal policy pathway for the century. To this end we consistently incorporate a damage-cost curve reproducing the observed relation between temperature and economic growth into the integrated assessment model DICE. We thus provide an intertemporally optimizing cost-benefit analysis of this century's climate problem. We account for uncertainties regarding the damage curve, climate sensitivity, socioeconomic future, and mitigation costs. The resulting optimal temperature is robust as can be understood from the generic temperature-dependence of the mitigation costs and the level of damages inferred from the observed temperature-growth relationship. Our results show that the politically motivated Paris Climate Agreement also represents the economically favourable pathway, if carried out properly.
Virtual 3D city models increasingly cover whole city areas; hence, the perception of complex urban structures becomes increasingly difficult. Using abstract visualization, complexity of these models can be hidden where its visibility is unnecessary, while important features are maintained and highlighted for better comprehension and communication. We present a technique to automatically generalize a given virtual 3D city model consisting of building models, an infrastructure network and optional land coverage data; this technique creates several representations of increasing levels of abstraction. Using the infrastructure network, our technique groups building models and replaces them with cell blocks, while preserving local landmarks. By computing a landmark hierarchy, we reduce the set of initial landmarks in a spatially balanced manner for use in higher levels of abstraction. In four application examples, we demonstrate smooth visualization of transitions between precomputed representations; dynamic landmark highlighting according to virtual camera distance; an implementation of a cognitively enhanced route representation, and generalization lenses to combine precomputed representations in focus + context visualization.
Virtual 3D city and landscape models are the main subject investigated in this thesis. They digitally represent urban space and have many applications in different domains, e.g., simulation, cadastral management, and city planning. Visualization is an elementary component of these applications. Photo-realistic visualization with an increasingly high degree of detail leads to fundamental problems for comprehensible visualization. A large number of highly detailed and textured objects within a virtual 3D city model may create visual noise and overload the users with information. Objects are subject to perspective foreshortening and may be occluded or not displayed in a meaningful way, as they are too small. In this thesis we present abstraction techniques that automatically process virtual 3D city and landscape models to derive abstracted representations. These have a reduced degree of detail, while essential characteristics are preserved. After introducing definitions for model, scale, and multi-scale representations, we discuss the fundamentals of map generalization as well as techniques for 3D generalization. The first presented technique is a cell-based generalization of virtual 3D city models. It creates abstract representations that have a highly reduced level of detail while maintaining essential structures, e.g., the infrastructure network, landmark buildings, and free spaces. The technique automatically partitions the input virtual 3D city model into cells based on the infrastructure network. The single building models contained in each cell are aggregated to abstracted cell blocks. Using weighted infrastructure elements, cell blocks can be computed on different hierarchical levels, storing the hierarchy relation between the cell blocks. Furthermore, we identify initial landmark buildings within a cell by comparing the properties of individual buildings with the aggregated properties of the cell. For each block, the identified landmark building models are subtracted using Boolean operations and integrated in a photo-realistic way. Finally, for the interactive 3D visualization we discuss the creation of the virtual 3D geometry and their appearance styling through colors, labeling, and transparency. We demonstrate the technique with example data sets. Additionally, we discuss applications of generalization lenses and transitions between abstract representations. The second technique is a real-time-rendering technique for geometric enhancement of landmark objects within a virtual 3D city model. Depending on the virtual camera distance, landmark objects are scaled to ensure their visibility within a specific distance interval while deforming their environment. First, in a preprocessing step a landmark hierarchy is computed, this is then used to derive distance intervals for the interactive rendering. At runtime, using the virtual camera distance, a scaling factor is computed and applied to each landmark. The scaling factor is interpolated smoothly at the interval boundaries using cubic Bézier splines. Non-landmark geometry that is near landmark objects is deformed with respect to a limited number of landmarks. We demonstrate the technique by applying it to a highly detailed virtual 3D city model and a generalized 3D city model. In addition we discuss an adaptation of the technique for non-linear projections and mobile devices. The third technique is a real-time rendering technique to create abstract 3D isocontour visualization of virtual 3D terrain models. The virtual 3D terrain model is visualized as a layered or stepped relief. The technique works without preprocessing and, as it is implemented using programmable graphics hardware, can be integrated with minimal changes into common terrain rendering techniques. Consequently, the computation is done in the rendering pipeline for each vertex, primitive, i.e., triangle, and fragment. For each vertex, the height is quantized to the nearest isovalue. For each triangle, the vertex configuration with respect to their isovalues is determined first. Using the configuration, the triangle is then subdivided. The subdivision forms a partial step geometry aligned with the triangle. For each fragment, the surface appearance is determined, e.g., depending on the surface texture, shading, and height-color-mapping. Flexible usage of the technique is demonstrated with applications from focus+context visualization, out-of-core terrain rendering, and information visualization. This thesis presents components for the creation of abstract representations of virtual 3D city and landscape models. Re-using visual language from cartography, the techniques enable users to build on their experience with maps when interpreting these representations. Simultaneously, characteristics of 3D geovirtual environments are taken into account by addressing and discussing, e.g., continuous scale, interaction, and perspective.
Light excitation of humic matter generates reactive oxygen species (ROS) in surface waters of aquatic ecosystems. Abundant ROS generated in humic matter rich lakes include singlet oxygen (O-1(2)) and hydrogen peroxide (H2O2). Because these ROS differ in half-life time and toxicity, we compared their effects on microbial activity (C-14-Leucine incorporation) and bacterial community composition (BCC) in surface waters of humic Lake Grosse Fuchskuhle (North-eastern Germany). For this purpose, experiments with water samples collected from the lake were conducted in July 2006, September 2008 and August 2009. Artificially increased O-1(2) and H2O2 concentrations inhibited microbial activity in water samples to a similar extent, but the effect of the respective ROS on BCC varied strongly. BCC analysis by 16S rRNA gene clone libraries and RT-PCR DGGE revealed ROS specific changes in relative abundance and activity of major bacterial groups and composition of dominating phylotypes. These changes were consistent in the three experiments performed in different years. The relative abundance of Polynucleobacter necessarius, Limnohabitans-related phylotypes (Betaproteobacteria), and Novosphingobium acidiphilum (Alphaproteobacteria) increased or was not affected by photo-sensitized O-1(2) exposure, but decreased after H2O2 exposure. The opposite pattern was found for Actinobacteria of the freshwater AcI-B cluster which were highly sensitive to O-1(2) but not to H2O2 exposure. Furthermore, group-specific RT-PCR DGGE analysis revealed that particle-attached P. necessarius and Limnohabitans-related phylotypes exhibit higher resistance to O-1(2) exposure compared to free-living populations. These results imply that O-1(2) acts as a factor in niche separation of closely affiliated Polynucleobacter and Limnohabitans-related phylotypes. Consequently, oxidative stress caused by photochemical ROS generation should be regarded as an environmental variable determining abundance, activity, and phylotype composition of environmentally relevant bacterial groups, in particular in illuminated and humic matter rich waters.
Focusing on the passive use of Instagram, we apply the affordance perspective to deeply explore its use and use-related outcomes. In the qualitative study, we uncover the affordances of focal social media features. Two distinct groups of affordances (self- and others-oriented) emerge. Following the grounded theory methodology, we develop the affordances-actualizations-outcomes model, explaining how immediate goals associated with features translate into outcomes. In the quantitative study, we test the model by applying structural equation modeling. Our findings confirm that actualizations of self- and others-oriented affordances are associated with distinct outcomes: social connectedness, positive affect, and overall satisfaction with Instagram experience.
Stadt, Land, Mord
(2019)
In the last century, several astronomical measurements have supported that a significant percentage (about 22%) of the total mass of the Universe, on galactic and extragalactic scales, is composed of a mysterious ”dark” matter (DM). DM does not interact with the electromagnetic force; in other words it does not reflect, absorb or emit light. It is possible that DM particles are weakly interacting massive particles (WIMPs) that can annihilate (or decay) into Standard Model (SM) particles, and modern very- high-energy (VHE; > 100 GeV) instruments such as imaging atmospheric Cherenkov telescopes (IACTs) can play an important role in constraining the main properties of such DM particles, by detecting these products. One of the most privileged targets where to look for DM signal are dwarf spheroidal galaxies (dSphs), as they are expected to be high DM-dominated objects with a clean, gas-free environment. Some dSphs could be considered as extended sources, considering the angular resolution of IACTs; their angu- lar resolution is adequate to detect extended emission from dSphs. For this reason, we performed an extended-source analysis, by taking into account in the unbinned maximum likelihood estimation both the energy and the angular extension dependency of observed events. The goal was to set more constrained upper limits on the velocity-averaged cross-section annihilation of WIMPs with VERITAS data. VERITAS is an array of four IACTs, able to detect γ-ray photons ranging between 100 GeV and 30 TeV. The results of this extended analysis were compared against the traditional spectral analysis. We found that a 2D analysis may lead to more constrained results, depending on the DM mass, channel, and source. Moreover, in this thesis, the results of a multi-instrument project are presented too. Its goal was to combine already published 20 dSphs data from five different experiments, such as Fermi-LAT, MAGIC, H.E.S.S., VERITAS and HAWC, in order to set upper limits on the WIMP annihilation cross-section in the widest mass range ever reported.
Breaking the barrier
(2018)
Topical administration permits targeted, sustained delivery of therapeutics to human skin. Delivery to the skin, however, is typically limited to lipophilic molecules with molecular weight of < 500 Da, capable of crossing the stratum corneum. Nevertheless, there are indications protein delivery may be possible in barrier deficient skin, a condition found in several inflammatory skin diseases such as psoriasis, using novel nanocarrier systems.
Methods: Water in water thermo-nanoprecipitation; dynamic light scattering; zeta potential measurement; nanoparticle tracking analysis; atomic force microscopy; cryogenic transmission electron microscopy; UV absorption; centrifugal separation membranes; bicinchoninic acid assay; circular dichroism; TNF alpha binding ELISA; inflammatory skin equivalent construction; human skin biopsies; immunohistochemistry; fluorescence microscopy; western blot; monocyte derived Langerhans cells; ELISA
Results: Here, we report the novel synthesis of thermoresponsive nanogels (tNG) and the stable encapsulation of the anti-TNFa fusion protein etanercept (ETR) (similar to 150 kDa) without alteration to its structure, as well as temperature triggered release from the tNGs. Novel tNG synthesis without the use of organic solvents was conducted, permitting in situ encapsulation of protein during assembly, something that holds great promise for easy manufacture and storage. Topical application of ETR loaded tNGs to inflammatory skin equivalents or tape striped human skin resulted in efficient ETR delivery throughout the SC and into the viable epidermis that correlated with clear anti-inflammatory effects. Notably, effective ETR delivery depended on temperature triggered release following topical application.
Conclusion: Together these results indicate tNGs hold promise as a biocompatible and easy to manufacture vehicle for stable protein encapsulation and topical delivery into barrier-deficient skin.
Breaking the Barrier
(2018)
Topical administration permits targeted, sustained delivery of therapeutics to human skin. Delivery to the skin, however, is typically limited to lipophilic molecules with molecular weight of < 500 Da, capable of crossing the stratum corneum. Nevertheless, there are indications protein delivery may be possible in barrier deficient skin, a condition found in several inflammatory skin diseases such as psoriasis, using novel nanocarrier systems. Methods: Water in water thermo-nanoprecipitation; dynamic light scattering; zeta potential measurement; nanoparticle tracking analysis; atomic force microscopy; cryogenic transmission electron microscopy; UV absorption; centrifugal separation membranes; bicinchoninic acid assay; circular dichroism; TNF alpha binding ELISA; inflammatory skin equivalent construction; human skin biopsies; immunohistochemistry; fluorescence microscopy; western blot; monocyte derived Langerhans cells; ELISA Results: Here, we report the novel synthesis of thermoresponsive nanogels (tNG) and the stable encapsulation of the anti-TNFa fusion protein etanercept (ETR) (similar to 150 kDa) without alteration to its structure, as well as temperature triggered release from the tNGs. Novel tNG synthesis without the use of organic solvents was conducted, permitting in situ encapsulation of protein during assembly, something that holds great promise for easy manufacture and storage. Topical application of ETR loaded tNGs to inflammatory skin equivalents or tape striped human skin resulted in efficient ETR delivery throughout the SC and into the viable epidermis that correlated with clear anti-inflammatory effects. Notably, effective ETR delivery depended on temperature triggered release following topical application. Conclusion: Together these results indicate tNGs hold promise as a biocompatible and easy to manufacture vehicle for stable protein encapsulation and topical delivery into barrier-deficient skin.
Enhanced topical delivery of dexamethasone by beta-cyclodextrin decorated thermoresponsive nanogels
(2018)
Highly hydrophilic, responsive nanogels are attractive as potential systems for the topical delivery of bioactives encapsulated in their three-dimensional polymeric scaffold. Yet, these drug carrier systems suffer from drawbacks for efficient delivery of hydrophobic drugs. Addressing this, β-cyclodextrin (βCD) could be successfully introduced into the drug carrier systems by exploiting its unique affinity toward dexamethasone (DXM) as well as its role as topical penetration enhancer. The properties of βCD could be combined with those of thermoresponsive nanogels (tNGs) based on dendritic polyglycerol (dPG) as a crosslinker and linear thermoresponsive polyglycerol (tPG) inducing responsiveness to temperature changes. Electron paramagnetic resonance (EPR) studies localized the drug within the hydrophobic cavity of βCD by differences in its mobility and environmental polarity. In fact, the fabricated carriers combining a particulate delivery system with a conventional penetration enhancer, resulted in an efficient delivery of DXM to the epidermis and the dermis of human skin ex vivo (enhancement compared to commercial DXM cream: ∼2.5 fold in epidermis, ∼30 fold in dermis). Furthermore, DXM encapsulated in βCD tNGs applied to skin equivalents downregulated the expression of proinflammatory thymic stromal lymphopoietin (TSLP) and outperformed a commercially available DXM cream.
Adequate irrigation inputs are essential for the application of hydrological models in irrigated catchments, but reliable data on both the amount and the frequency of irrigation applications are often missing at an appropriate spatial scale. In this paper, we demonstrate and test approaches to estimate irrigation inputs for distributed hydrological modelling. In this context, the Soil and Water Assessment Tool was applied to simulate water balances for an irrigated catchment in southeast Australia during the period 2008–2010. Two methods for estimating irrigation inputs were tested. One method was based on a fixed irrigation application rate, whereas the other one had variable irrigation rates depending on season and the irrigated crop. These two approaches were also compared with the ‘auto-irrigation’ method within the Soil and Water Assessment Tool model. The method with variable irrigation rates resulted in the most reasonable interpretation of the readily available irrigation data, consistent estimates of irrigation runoff coefficients throughout the year and the best fit to observed data on both drain flows at the catchment outlet and spatial evapotranspiration patterns. We also found that the different irrigation inputs significantly affected simulated water balances, in particular deep percolation under relatively dry climatic conditions. All these results suggest that it is possible to infer irrigation inputs from readily available data and local knowledge, adequate for hydrological modelling in irrigated catchments. Our study also demonstrates that, in order to predict reliable water balances in irrigated catchments, an accurate knowledge of irrigation scheduling and irrigation runoff is required. Copyright © 2015 John Wiley & Sons, Ltd.
A Rhodobacter capsulatus member of a universal permease family imports molybdate and other oxyanions
(2010)
Molybdenum (Mo) is an important trace element that is toxic at high concentrations. To resolve the mechanisms underlying Mo toxicity, Rhodobacter capsulatus mutants tolerant to high Mo concentrations were isolated by random transposon Tn5 mutagenesis. The insertion sites of six independent isolates mapped within the same gene predicted to code for a permease of unknown function located in the cytoplasmic membrane. During growth under Mo-replete conditions, the wild-type strain accumulated considerably more Mo than the permease mutant. For mutants defective for the permease, the high-affinity molybdate importer ModABC, or both transporters, in vivo Mo-dependent nitrogenase (Mo-nitrogenase) activities at different Mo concentrations suggested that ModABC and the permease import molybdate in nanomolar and micromolar ranges, respectively. Like the permease mutants, a mutant defective for ATP sulfurylase tolerated high Mo concentrations, suggesting that ATP sulfurylase is the main target of Mo inhibition in R. capsulatus. Sulfate-dependent growth of a double mutant defective for the permease and the high-affinity sulfate importer CysTWA was reduced compared to those of the single mutants, implying that the permease plays an important role in sulfate uptake. In addition, permease mutants tolerated higher tungstate and vanadate concentrations than the wild type, suggesting that the permease acts as a general oxyanion importer. We propose to call this permease PerO (for oxyanion permease). It is the first reported bacterial molybdate transporter outside the ABC transporter family.
The Western honey bee (Apis mellifera) is widely used as commercial pollinator in worldwide agriculture and, therefore, plays an important role in global food security. Among the parasites and pathogens threatening health and survival of honey bees are two species of microsporidia, Nosema apis and Nosema ceranae. Nosema ceranae is considered an emerging pathogen of the Western honey bee. Reports on the spread of N. ceranae suggested that this presumably highly virulent species is replacing its more benign congener N. apis in the global A. mellifera population. We here present a 12 year longitudinal cohort study on the prevalence of N. apis and N. ceranae in Northeast Germany. Between 2005 and 2016, a cohort of about 230 honey bee colonies originating from 23 apiaries was sampled twice a year (spring and autumn) resulting in a total of 5,600 bee samples which were subjected to microscopic and molecular analysis for determining the presence of infections with N. apis or/and N. ceranae. Throughout the entire study period, both N. apis- and N. ceranae-infections could be diagnosed within the cohort. Logistic regression analysis of the prevalence data demonstrated a significant increase of N. ceranae-infections over the last 12 years, both in autumn (reflecting the development during the summer) and in spring (reflecting the development over winter) samples. Cell culture experiments confirmed that N. ceranae has a higher proliferative potential than N. apis at 27. and 33 degrees C potentially explaining the increase in N. ceranae prevalence during summer. In autumn, characterized by generally low infection prevalence, this increase was accompanied by a significant decrease in N. apis- infection prevalence. In contrast, in spring, the season with a higher prevalence of infection, no significant decrease of N. apis infections despite a significant increase in N. ceranae infections could be observed. Therefore, our data do not support a general advantage of N. ceranae over N. apis and an overall replacement of N. apis by N. ceranae in the studied honey bee population.
Mastery is a psychological resource that is defined as the extent to which individuals perceive having control over important circumstances of their lives. Although mastery has been associated with various physical and psychological health outcomes, studies assessing its relationship with weight status and dietary behavior are lacking. The aim of this cross-sectional study was to assess the relationship between mastery and weight status, food intake, snacking, and eating disorder (ED) symptoms in the NutriNet-Sante cohort study. Mastery was measured with the Pearlin Mastery Scale (PMS) in 32,588 adults (77.45% female), the mean age was 50.04 (14.53) years. Height and weight were self-reported. Overall diet quality and food group consumption were evaluated with >= 3 self-reported 24-h dietary records (range: 3-27). Snacking was assessed with an ad-hoc question. ED symptoms were assessed with the Sick-Control-One-Fat-Food Questionnaire (SCOFF). Linear and logistic regression analyses were conducted to assess the relationship between mastery and weight status, food intake, snacking, and ED symptoms, controlling for sociodemographic and lifestyle characteristics. Females with a higher level of mastery were less likely to be underweight (OR: 0.88; 95%CI: 0.84, 0.93), overweight [OR: 0.94 (0.91, 0.97)], or obese [class I: OR: 0.86 (0.82, 0.90); class II: OR: 0.76 (0.71, 0.82); class III: OR: 0.77 (0.69, 0.86)]. Males with a higher level of mastery were less likely to be obese [class III: OR: 0.75 (0.57, 0.99)]. Mastery was associated with better diet quality overall, a higher consumption of fruit and vegetables, seafood, wholegrain foods, legumes, non-salted oleaginous fruits, and alcoholic beverages and with a lower consumption of meat and poultry, dairy products, sugary and fatty products, milk-based desserts, and sweetened beverages. Mastery was also associated with lower snacking frequency [OR: 0.89 (0.86, 0.91)] and less ED symptoms [OR: 0.73 (0.71, 0.75)]. As mastery was associated with favorable dietary behavior and weight status, targeting mastery might be a promising approach in promoting healthy behaviors.
Huntington disease (HD), a dominantly inherited neurodegenerative disorder caused by the expansion of a CAG-encoded polyglutamine (polyQ) repeat in huntingtin (Htt), displays a highly heterogeneous etiopathology and disease onset. Here, we show that the translation of expanded CAG repeats in mutant Htt exon 1 leads to a depletion of charged glutaminyl-transfer RNA (tRNA) Gln-CUG that pairs exclusively to the CAG codon. This results in translational frameshifting and the generation of various transframe-encoded species that differently modulate the conformational switch to nucleate fibrillization of the parental polyQ protein. Intriguingly, the frameshifting frequency varies strongly among different cell lines and is higher in cells with intrinsically lower concentrations of tRNA Gln-CUG. The concentration of tRNA Gln-CUG also differs among different brain areas in the mouse. We propose that translational frameshifting may act as a significant disease modifier that contributes to the cell-selective neurotoxicity and disease course heterogeneity of HD on both cellular and individual levels.
Die tagespolitische Auseinandersetzung stellt sich als eine Für- und Gegenrede zu politischen Problemen, Herausforderungen oder Handlungsinitiativen dar: Verschiedene Akteure äußern sich kritisch oder befürwortend zu vollzogenen oder geplanten politischen Maßnahmen wie auch – ebenso kritisch oder befürwortend – zu getätigten Äußerungen anderer politischer und medialer Akteure. Insgesamt werden dabei eine Vielzahl von Argumenten mit unterschiedlicher Reichweite und Intensität ausgetauscht, aufgegriffen und verworfen. Der Beitrag argumentiert, dass solche sprachlich verfassten Auseinandersetzungen Legitimationsdiskurse sind, in denen Legitimität anhand normativer Werte verhandelt wird. Dort genutzte Wertkategorien bleiben jedoch deutungsoffen und oft implizit. Um politisches Lernen zu fördern, erweist sich eine gemeinsame Bearbeitung solcher Legitimationsdiskurse als gewinnbringend. Zentral dafür ist, dass Legitimationsargumente in Lehr-Lernarrangements explizit und verhandelbar werden.
Demokratie und politische Bildung stehen in einem sich zugewandten Verhältnis. Doch folgt daraus, dass politische Urteile stets demokratisch sein müssen? Der Beitrag diskutiert diese Frage vor dem Hintergrund der derzeitigen Debatte um antidemokratische Bewegungen in der Gesellschaft, der Rolle politischer Bildung als Förderin von Demokratie und der individuellen Herausforderung für Lehrpersonen in der Unterrichtspraxis.
Qualitative Inhaltsanalyse
(2021)
Die qualitative Inhaltsanalyse dient als Auswertungsinstrument für Textmaterial, kann aber auch für die Analyse von Ton- und Bildmaterial genutzt werden. Anders als die quantitative Inhaltsanalyse zielt sie darauf ab, dem Material auch Informationen zu entnehmen, auf die ausschließlich interpretativ geschlossen werden kann. Die qualitative Inhaltsanalyse knüpft an die hermeneutische Tradition des Verstehens an. Der Verstehensprozess wird jedoch in einen vordefinierten, theorie- und regelgeleiteten Forschungsablauf gebettet, um dem wissenschaftlichen Anspruch an Systematik und Intersubjektivität nachzukommen.
Rates of multiple paternities were investigated in the sailfin molly (Poecilia latipinna), using eight microsatellite loci. Genotyping was performed for offspring and mothers in 40 broods from four allopatric populations from the south-eastern U.S.A. along a geographic stretch of 1200 km in west-east direction and approximately 200 km from north to south. No significant differences regarding rates of multiple paternities were found between populations despite sample populations stemming from ecologically divergent habitats. Even the most conservative statistical approach revealed a minimum of 70% of the broods being sired by at least two males, with an average of 1.80-2.95 putative fathers per brood. Within broods, one male typically sired far more offspring than would be expected under an assumed equal probability of all detected males siring offspring.
Structural kinetic modeling (SKM) enables the analysis of dynamical properties of metabolic networks solely based on topological information and experimental data. Current SKM-based experiments are hampered by the time-intensive process of assigning model parameters and choosing appropriate sampling intervals for MonteCarlo experiments. We introduce a toolbox for the automatic and efficient construction and evaluation of structural kinetic models (SK models). Quantitative and qualitative analyses of network stability properties are performed in an automated manner. We illustrate the model building and analysis process in detailed example scripts that provide toolbox implementations of previously published literature models.
Metabolic networks are characterized by complex interactions and regulatory mechanisms between many individual components. These interactions determine whether a steady state is stable to perturbations. Structural kinetic modeling (SKM) is a framework to analyze the stability of metabolic steady states that allows the study of the system Jacobian without requiring detailed knowledge about individual rate equations. Stability criteria can be derived by generating a large number of structural kinetic models (SK-models) with randomly sampled parameter sets and evaluating the resulting Jacobian matrices. Until now, SKM experiments applied univariate tests to detect the network components with the largest influence on stability. In this work, we present an extended SKM approach relying on supervised machine learning to detect patterns of enzyme-metabolite interactions that act together in an orchestrated manner to ensure stability. We demonstrate its application on a detailed SK-model of the Calvin-Benson cycle and connected pathways. The identified stability patterns are highly complex reflecting that changes in dynamic properties depend on concerted interactions between several network components. In total, we find more patterns that reliably ensure stability than patterns ensuring instability. This shows that the design of this system is strongly targeted towards maintaining stability. We also investigate the effect of allosteric regulators revealing that the tendency to stability is significantly increased by including experimentally determined regulatory mechanisms that have not yet been integrated into existing kinetic models.
Metabolic systems tend to exhibit steady states that can be measured in terms of their concentrations and fluxes. These measurements can be regarded as a phenotypic representation of all the complex interactions and regulatory mechanisms taking place in the underlying metabolic network. Such interactions determine the system's response to external perturbations and are responsible, for example, for its asymptotic stability or for oscillatory trajectories around the steady state. However, determining these perturbation responses in the absence of fully specified kinetic models remains an important challenge of computational systems biology. Structural kinetic modeling (SKM) is a framework to analyse whether a metabolic steady state remains stable under perturbation, without requiring detailed knowledge about individual rate equations. It provides a parameterised representation of the system's Jacobian matrix in which the model parameters encode information about the enzyme-metabolite interactions. Stability criteria can be derived by generating a large number of structural kinetic models (SK-models) with randomly sampled parameter sets and evaluating the resulting Jacobian matrices. The parameter space can be analysed statistically in order to detect network positions that contribute significantly to the perturbation response. Because the sampled parameters are equivalent to the elasticities used in metabolic control analysis (MCA), the results are easy to interpret biologically. In this project, the SKM framework was extended by several novel methodological improvements. These improvements were evaluated in a simulation study using a set of small example pathways with simple Michaelis Menten rate laws. Afterwards, a detailed analysis of the dynamic properties of the neuronal TCA cycle was performed in order to demonstrate how the new insights obtained in this work could be used for the study of complex metabolic systems. The first improvement was achieved by examining the biological feasibility of the elasticity combinations created during Monte Carlo sampling. Using a set of small example systems, the findings showed that the majority of sampled SK-models would yield negative kinetic parameters if they were translated back into kinetic models. To overcome this problem, a simple criterion was formulated that mitigates such infeasible models and the application of this criterion changed the conclusions of the SKM experiment. The second improvement of this work was the application of supervised machine-learning approaches in order to analyse SKM experiments. So far, SKM experiments have focused on the detection of individual enzymes to identify single reactions important for maintaining the stability or oscillatory trajectories. In this work, this approach was extended by demonstrating how SKM enables the detection of ensembles of enzymes or metabolites that act together in an orchestrated manner to coordinate the pathways response to perturbations. In doing so, stable and unstable states served as class labels, and classifiers were trained to detect elasticity regions associated with stability and instability. Classification was performed using decision trees and relevance vector machines (RVMs). The decision trees produced good classification accuracy in terms of model bias and generalizability. RVMs outperformed decision trees when applied to small models, but encountered severe problems when applied to larger systems because of their high runtime requirements. The decision tree rulesets were analysed statistically and individually in order to explore the role of individual enzymes or metabolites in controlling the system's trajectories around steady states. The third improvement of this work was the establishment of a relationship between the SKM framework and the related field of MCA. In particular, it was shown how the sampled elasticities could be converted to flux control coefficients, which were then investigated for their predictive information content in classifier training. After evaluation on the small example pathways, the methodology was used to study two steady states of the neuronal TCA cycle with respect to their intrinsic mechanisms responsible for stability or instability. The findings showed that several elasticities were jointly coordinated to control stability and that the main source for potential instabilities were mutations in the enzyme alpha-ketoglutarate dehydrogenase.
Previous clinical research found that invasive vagus nerve stimulation (VNS) enhanced word recognition memory in epileptic patients, an effect assumed to be related to the activation of brainstem arousal systems. In this study, we applied non-invasive transcutaneous auricular VNS (tVNS) to replicate and extend the previous work. Using a single-blind, randomized, between-subject design, 60 healthy volunteers received active or sham stimulation during a lexical decision task, in which emotional and neutral stimuli were classified as words or non-words. In a subsequent recognition memory task (1 day after stimulation), participants' memory performance on these words and their subjective memory confidence were tested. Salivary alpha-amylase (sAA) levels, a putative indirect measure of central noradrenergic activation, were also measured before and after stimulation. During encoding, pleasant words were more accurately detected than neutral and unpleasant words. However, no tVNS effects were observed on task performance or on overall sAA level changes. tVNS also did not modulate overall recognition memory, which was particularly enhanced for pleasant emotional words. However, when hit rates were split based on confidence ratings reflecting familiarity- and recollection-based memory, higher recollection-based memory performance (irrespective of emotional category) was observed during active stimulation than during sham stimulation. To summarize, we replicated prior findings of enhanced processing and memory for emotional (pleasant) words. Whereas tVNS showed no effects on word processing, subtle effects on recollection-based memory performance emerged, which may indicate that tVNS facilitates hippocampus-mediated consolidation processes.
Previous clinical research found that invasive vagus nerve stimulation (VNS) enhanced word recognition memory in epileptic patients, an effect assumed to be related to the activation of brainstem arousal systems. In this study, we applied non-invasive transcutaneous auricular VNS (tVNS) to replicate and extend the previous work. Using a single-blind, randomized, between-subject design, 60 healthy volunteers received active or sham stimulation during a lexical decision task, in which emotional and neutral stimuli were classified as words or non-words. In a subsequent recognition memory task (1 day after stimulation), participants' memory performance on these words and their subjective memory confidence were tested. Salivary alpha-amylase (sAA) levels, a putative indirect measure of central noradrenergic activation, were also measured before and after stimulation. During encoding, pleasant words were more accurately detected than neutral and unpleasant words. However, no tVNS effects were observed on task performance or on overall sAA level changes. tVNS also did not modulate overall recognition memory, which was particularly enhanced for pleasant emotional words. However, when hit rates were split based on confidence ratings reflecting familiarity- and recollection-based memory, higher recollection-based memory performance (irrespective of emotional category) was observed during active stimulation than during sham stimulation. To summarize, we replicated prior findings of enhanced processing and memory for emotional (pleasant) words. Whereas tVNS showed no effects on word processing, subtle effects on recollection-based memory performance emerged, which may indicate that tVNS facilitates hippocampus-mediated consolidation processes.
The Covid-19 pandemic imposed new constraints on empirical research and forced researchers to transfer from traditional laboratory research to the online environment. This study tested the validity of a web-based episodic memory paradigm by comparing participants’ memory performance for trustworthy and untrustworthy facial stimuli in a supervised laboratory setting and an unsupervised web setting. Consistent with previous results, we observed enhanced episodic memory for untrustworthy compared to trustworthy faces. Most importantly, this memory bias was comparable in the online and the laboratory experiment, suggesting that web-based procedures are a promising tool for memory research.
The Covid-19 pandemic imposed new constraints on empirical research and forced researchers to transfer from traditional laboratory research to the online environment. This study tested the validity of a web-based episodic memory paradigm by comparing participants' memory performance for trustworthy and untrustworthy facial stimuli in a supervised laboratory setting and an unsupervised web setting. Consistent with previous results, we observed enhanced episodic memory for untrustworthy compared to trustworthy faces. Most importantly, this memory bias was comparable in the online and the laboratory experiment, suggesting that web-based procedures are a promising tool for memory research.
The Covid-19 pandemic imposed new constraints on empirical research and forced researchers to transfer from traditional laboratory research to the online environment. This study tested the validity of a web-based episodic memory paradigm by comparing participants’ memory performance for trustworthy and untrustworthy facial stimuli in a supervised laboratory setting and an unsupervised web setting. Consistent with previous results, we observed enhanced episodic memory for untrustworthy compared to trustworthy faces. Most importantly, this memory bias was comparable in the online and the laboratory experiment, suggesting that web-based procedures are a promising tool for memory research.
Background
Non-invasive transcutaneous auricular vagus nerve stimulation (taVNS) has received tremendous attention as a potential neuromodulator of cognitive and affective functions, which likely exerts its effects via activation of the locus coeruleus-noradrenaline (LC-NA) system. Reliable effects of taVNS on markers of LC-NA system activity, however, have not been demonstrated yet.
Methods
The aim of the present study was to overcome previous limitations by pooling raw data from a large sample of ten taVNS studies (371 healthy participants) that collected salivary alpha-amylase (sAA) as a potential marker of central NA release.
Results
While a meta-analytic approach using summary statistics did not yield any significant effects, linear mixed model analyses showed that afferent stimulation of the vagus nerve via taVNS increased sAA levels compared to sham stimulation (b = 0.16, SE = 0.05, p = 0.001). When considering potential confounders of sAA, we further replicated previous findings on the diurnal trajectory of sAA activity.
Conclusion(s)
Vagal activation via taVNS increases sAA release compared to sham stimulation, which likely substantiates the assumption that taVNS triggers NA release. Moreover, our results highlight the benefits of data pooling and data sharing in order to allow stronger conclusions in research.
Background
Non-invasive transcutaneous auricular vagus nerve stimulation (taVNS) has received tremendous attention as a potential neuromodulator of cognitive and affective functions, which likely exerts its effects via activation of the locus coeruleus-noradrenaline (LC-NA) system. Reliable effects of taVNS on markers of LC-NA system activity, however, have not been demonstrated yet.
Methods
The aim of the present study was to overcome previous limitations by pooling raw data from a large sample of ten taVNS studies (371 healthy participants) that collected salivary alpha-amylase (sAA) as a potential marker of central NA release.
Results
While a meta-analytic approach using summary statistics did not yield any significant effects, linear mixed model analyses showed that afferent stimulation of the vagus nerve via taVNS increased sAA levels compared to sham stimulation (b = 0.16, SE = 0.05, p = 0.001). When considering potential confounders of sAA, we further replicated previous findings on the diurnal trajectory of sAA activity.
Conclusion(s)
Vagal activation via taVNS increases sAA release compared to sham stimulation, which likely substantiates the assumption that taVNS triggers NA release. Moreover, our results highlight the benefits of data pooling and data sharing in order to allow stronger conclusions in research.
Alix Giraud-Willer untersucht die Berechtigung starrer Mindeststrafen auf rechtsvergleichender Basis. Sie schränken den Entscheidungsspielraum des Richters bei der Strafzumessung erheblich ein. Absolute Strafen, eine extreme Ausprägung starrer Mindeststrafen, schließen einen richterlichen Entscheidungsspielraum im Grundsatz sogar gänzlich aus. Während das deutsche Strafrecht starre Mindeststrafen, einschließlich absoluter Strafen, vorsieht, nahm das französische Recht von starren (erhöhten) Mindeststrafen inzwischen Abstand. Die Autorin untersucht die Wechselwirkungen zwischen gesetzlicher Fixierung hoher Strafen, Reaktionen der Strafpraxis und gesetzlicher Lockerung der Strafdrohungen in beiden Rechtsordnungen. Durch ihren Blick auf zwei Jurisdiktionen bietet sie Erklärungsansätze für bestimmte Erscheinungen des geltenden Sanktionenrechts sowie Denkanstöße für seine Reformierung an.
The Chinese coastal cities play an increasing economic role in the Yellow Sea region. The inclusion of these cities into the intra Asian economic cooperation is accomplished not only in the conventional sphere of trade but also by a growing involvement in telecommunication networks, technological exchange and the circulation of human resources. That is why these cities emerge as autonomous actors in the East Asian integration process. In this context national states face deep structural change, especially in the field of sovereignty and territory. Concerning the internal situation of China, this change could also cause a turn over of the relationship between the central government and the regions.
We use the prolonged Greek crisis as a case study to understand how a lasting economic shock affects the innovation strategies of firms in economies with moderate innovation activities. Adopting the 3-stage CDM model, we explore the link between R&D, innovation, and productivity for different size groups of Greek manufacturing firms during the prolonged crisis. At the first stage, we find that the continuation of the crisis is harmful for the R&D engagement of smaller firms while it increased the willingness for R&D activities among the larger ones. At the second stage, among smaller firms the knowledge production remains unaffected by R&D investments, while among larger firms the R&D decision is positively correlated with the probability of producing innovation, albeit the relationship is weakened as the crisis continues. At the third stage, innovation output benefits only larger firms in terms of labor productivity, while the innovation-productivity nexus is insignificant for smaller firms during the lasting crisis.
We use the prolonged Greek crisis as a case study to understand how a lasting economic shock affects the innovation strategies of firms in economies with moderate innovation activities. Adopting the 3-stage CDM model, we explore the link between R&D, innovation, and productivity for different size groups of Greek manufacturing firms during the prolonged crisis. At the first stage, we find that the continuation of the crisis is harmful for the R&D engagement of smaller firms while it increased the willingness for R&D activities among the larger ones. At the second stage, among smaller firms the knowledge production remains unaffected by R&D investments, while among larger firms the R&D decision is positively correlated with the probability of producing innovation, albeit the relationship is weakened as the crisis continues. At the third stage, innovation output benefits only larger firms in terms of labor productivity, while the innovation-productivity nexus is insignificant for smaller firms during the lasting crisis.
Regulation of gene transcription plays a major role in mediating cellular responses and physiological behavior in all known organisms. The finding that similar genes are often regulated in a similar manner (co-regulated or "co-expressed") has directed several "guilt-by-association" approaches in order to reverse-engineer the cellular transcriptional networks using gene expression data as a compass. This kind of studies has been considerably assisted in the recent years by the development of high-throughput transcript measurement platforms, specifically gene microarrays and next-generation sequencing. In this thesis, I describe several approaches for improving the extraction and interpretation of the information contained in microarray based gene expression data, through four steps: (1) microarray platform design, (2) microarray data normalization, (3) gene network reverse engineering based on expression data and (4) experimental validation of expression-based guilt-by-association inferences. In the first part test case is shown aimed at the generation of a microarray for Thellungiella salsuginea, a salt and drought resistant close relative to the model plant Arabidopsis thaliana; the transcripts of this organism are generated on the combination of publicly available ESTs and newly generated ad-hoc next-generation sequencing data. Since the design of a microarray platform requires the availability of highly reliable and non-redundant transcript models, these issues are addressed consecutively, proposing several different technical solutions. In the second part I describe how inter-array correlation artifacts are generated by the common microarray normalization methods RMA and GCRMA, together with the technical and mathematical characteristics underlying the problem. A solution is proposed in the form of a novel normalization method, called tRMA. The third part of the thesis deals with the field of expression-based gene network reverse engineering. It is shown how different centrality measures in reverse engineered gene networks can be used to distinguish specific classes of genes, in particular essential genes in Arabidopsis thaliana, and how the use of conditional correlation can add a layer of understanding over the information flow processes underlying transcript regulation. Furthermore, several network reverse engineering approaches are compared, with a particular focus on the LASSO, a linear regression derivative rarely applied before in global gene network reconstruction, despite its theoretical advantages in robustness and interpretability over more standard methods. The performance of LASSO is assessed through several in silico analyses dealing with the reliability of the inferred gene networks. In the final part, LASSO and other reverse engineering methods are used to experimentally identify novel genes involved in two independent scenarios: the seed coat mucilage pathway in Arabidopsis thaliana and the hypoxic tuber development in Solanum tuberosum. In both cases an interesting method complementarity is shown, which strongly suggests a general use of hybrid approaches for transcript expression-based inferences. In conclusion, this work has helped to improve our understanding of gene transcription regulation through a better interpretation of high-throughput expression data. Part of the network reverse engineering methods described in this thesis have been included in a tool (CorTo) for gene network reverse engineering and annotated visualization from custom transcription datasets.
Potentiality of nanosized materials has been largely proved but a closer look shows that a significant percentage of this research is related to oxides and metals, while the number drastically drops for metallic ceramics, namely transition metal nitrides and metal carbides. The lack of related publications do not reflect their potential but rather the difficulties related to their synthesis as dense and defect-free structures, fundamental prerequisites for advanced mechanical applications.
The present habilitation work aims to close the gap between preparation and processing, indicating novel synthetic pathways for a simpler and sustainable synthesis of transition metal nitride (MN) and carbide (MC) based nanostructures and easier processing thereafter. In spite of simplicity and reliability, the designed synthetic processes allow the production of functional materials, with the demanded size and morphology.
The goal was achieved exploiting classical and less-classical precursors, ranging from common metal salts and molecules (e.g. urea, gelatin, agar, etc), to more exotic materials, such as leafs, filter paper and even wood. It was found that the choice of precursors and reaction conditions makes it possible to control chemical composition (going for instance from metal oxides to metal oxy-nitrides to metal nitrides, or from metal nitrides to metal carbides, up to quaternary systems), size (from 5 to 50 nm) and morphology (going from mere spherical nanoparticles to rod-like shapes, fibers, layers, meso-porous and hierarchical structures, etc). The nature of the mixed precursors also allows the preparation of metal nitrides/carbides based nanocomposites, thus leading to multifunctional materials (e.g. MN/MC@C, MN/MC@PILs, etc) but also allowing dispersion in liquid media. Control over composition, size and morphology is obtained with simple adjustment of the main route, but also coupling it with processes such as electrospin, aerosol spray, bio-templating, etc. Last but not least, the nature of the precursor materials also allows easy processing, including printing, coating, casting, film and thin layers preparation, etc).
The designed routes are, concept-wise, similar and they all start by building up a secondary metal ion-N/C precursor network, which converts, upon heat treatment, into an intermediate “glass”. This glass stabilizes the nascent nanoparticles during their nucleation and impairs their uncontrolled growth during the heat treatment (scheme 1). This way, one of the main problems related to the synthesis of MN/MC, i.e. the need of very high temperature, could also be overcome (from up to 2000°C, for classical synthesis, down to 700°C in the present cases). The designed synthetic pathways are also conceived to allow usage of non-toxic compounds and to minimize (or even avoid) post-synthesis purification, still bringing to phase pure and well-defined (crystalline) nanoparticles.
This research aids to simplify the preparation of MN/MC, making these systems now readily available in suitable amounts both for fundamental and applied science. The prepared systems have been tested (in some cases for the first time) in many different fields, e.g. battery (MnN0.43@C shown a capacity stabilized at a value of 230 mAh/g, with coulombic efficiencies close to 100%), as alternative magnetic materials (Fe3C nanoparticles were prepared with different size and therefore different magnetic behavior, superparamagnetic or ferromagnetic, showing a saturation magnetization value up to 130 emu/g, i.e. similar to the value expected for the bulk material), as filters and for the degradation of organic dyes (outmatching the performance of carbon), as catalysts (both as active phase but also as active support, leading to high turnover rate and, more interesting, to tunable selectivity). Furthermore, with this route, it was possible to prepare for the first time, to the best of our knowledge, well-defined and crystalline MnN0.43, Fe3C and Zn1.7GeN1.8O nanoparticles via bottom-up approaches.
Once the synthesis of these materials can be made straightforward, any further modification, combination, manipulation, is in principle possible and new systems can be purposely conceived (e.g. hybrids, nanocomposites, ferrofluids, etc).
Regulating public space
(2009)
We study a natural Dirac operator on a Lagrangian submanifold of a Kähler manifold. We first show that its square coincides with the Hodge-de Rham Laplacian provided the complex structure identifies the Spin structures of the tangent and normal bundles of the submanifold. We then give extrinsic estimates for the eigenvalues of that operator and discuss some examples.
We study a natural Dirac operator on a Lagrangian submanifold of a Kähler manifold. We first show that its square coincides with the Hodge - de Rham Laplacian provided the complex structure identifies the Spin structures of the tangent and normal bundles of the submanifold. We then give extrinsic estimates for the eigenvalues of that operator and discuss some examples.
Any conception in linguistics and linguistic philosophy that prioritizes the world-disclosing function over the world-representing function of language can be regarded as a kind of linguistic hermeneutics. The paper tries to specify this general thesis by picking up and analysing historical trends in the philosophy of language. It spells out the relationship between the situatedness of locutors in the medium of linguistic practices and the way in which they (through their speech acts) articulate this medium by actualizing possibilities for personal expressivity and interpersonal communication. It is argued that the starting point from the medium that always already transcends the particular speech acts offers an alternative to inferential semantics. From the perspective of linguistic hermeneutics, the world is disclosed and exposed to ongoing articulation in characteristic hermeneutic situations of language use. The concepts of linguistic medium and discursive articulation of the world are treated in terms of hermeneutic trans- subjectivity as enabling all forms of communicative intersubjectivity. If one ignores the fore-structuring role of the former, one would hypostatise the latter. With regard to this claim, the theory of formal pragmatics is critically discussed.
A simple one-dimensional microscopic model of the depinning transition of an interface from an attractive hard wall is introduced and investigated. Upon varying a control parameter, the critical behavior observed along the transition line changes from a directed-percolation type to a multiplicative-noise type. Numerical simulations allow for a quantitative study of the multicritical point separating the two regions. Mean-field arguments and the mapping on yet a simpler model provide some further insight on the overall scenario
We present a comprehensive analysis of the whole sample of available XMM-Newton observations of high-mass X-ray binaries (HMXBs) until August 2013, focusing on the FeK alpha emission line. This line is key to better understanding the physical properties of the material surrounding the X-ray source within a few stellar radii (the circumstellar medium). We collected observations from 46 HMXBs and detected FeK alpha in 21 of them. We used the standard classification of HMXBs to divide the sample into different groups. We find that (1) different classes of HMXBs display different qualitative behaviours in the FeK alpha spectral region. This is visible especially in SGXBs (showing ubiquitous Fe fluorescence but not recombination Fe lines) and in gamma Cass analogues (showing both fluorescent and recombination Fe lines). (2) FeK alpha is centred at a mean value of 6.42 keV. Considering the instrumental and fits uncertainties, this value is compatible with ionization states that are lower than Fe xviii. (3) The flux of the continuum is well correlated with the flux of the line, as expected. Eclipse observations show that the Fe fluorescence emission comes from an extended region surrounding the X-ray source. (4) We observe an inverse correlation between the X-ray luminosity and the equivalent width of FeK alpha (EW). This phenomenon is known as the X-ray Baldwin effect. (5) FeK alpha is narrow (sigma(line) < 0.15 keV), reflecting that the reprocessing material does not move at high speeds. We attempt to explain the broadness of the line in terms of three possible broadening phenomena: line blending, Compton scattering, and Doppler shifts (with velocities of the reprocessing material V similar to 1000 km s(-1)). (6) The equivalent hydrogen column (N-H) directly correlates to the EW of FeK alpha, displaying clear similarities to numerical simulations. It highlights the strong link between the absorbing and the fluorescent matter. (7) The observed NH in supergiant X-ray binaries (SGXBs) is in general higher than in supergiant fast X-ray transients (SFXTs). We suggest two possible explanations: different orbital configurations or a different interaction compact object - wind. (8) Finally, we analysed the sources IGR J16320-4751 and 4U 1700-37 in more detail, covering several orbital phases. The observed variation in NH between phases is compatible with the absorption produced by the wind of their optical companions. The results clearly point to a very important contribution of the donor's wind in the FeK alpha emission and the absorption when the donor is a supergiant massive star.
Aims. To close this gap, we perform a comparative analysis of the optical companion in two important systems: IGR J175442619 (SFXT) and Vela X-1 (SGXB). We analyze the spectra of each star in detail and derive their stellar and wind properties. As a next step, we compare the wind parameters, giving us an excellent chance of recognizing key differences between donor winds in SFXTs and SGXBs. Methods. We use archival infrared, optical and ultraviolet observations, and analyze them with the non-local thermodynamic equilibrium (NLTE) Potsdam Wolf-Rayet model atmosphere code. We derive the physical properties of the stars and their stellar winds, accounting for the influence of X-rays on the stellar winds. Results. We find that the stellar parameters derived from the analysis generally agree well with the spectral types of the two donors: O9I (IGR J17544-2619) and B0.5Iae (Vela X-1). The distance to the sources have been revised and also agree well with the estimations already available in the literature. In IGR J17544-2619 we are able to narrow the uncertainty to d = 3.0 +/- 0.2 kpc. From the stellar radius of the donor and its X-ray behavior, the eccentricity of IGR J17544-2619 is constrained to e < 0.25. The derived chemical abundances point to certain mixing during the lifetime of the donors. An important difference between the stellar winds of the two stars is their terminal velocities (v(infinity) = 1500 km s(-1) in IGR J17544-2619 and v(infinity) = 700 km s(-1) in Vela X-1), which have important consequences on the X-ray luminosity of these sources. Conclusions. The donors of IGR J17544-2619 and Vela X-1 have similar spectral types as well as similar parameters that physically characterize them and their spectra. In addition, the orbital parameters of the systems are similar too, with a nearly circular orbit and short orbital period. However, they show moderate differences in their stellar wind velocity and the spin period of their neutron star which has a strong impact on the X-ray luminosity of the sources. This specific combination of wind speed and pulsar spin favors an accretion regime with a persistently high luminosity in Vela X-1, while it favors an inhibiting accretion mechanism in IGR J17544-2619. Our study demonstrates that the relative wind velocity is critical in class determination for the HMXBs hosting a supergiant donor, given that it may shift the accretion mechanism from direct accretion to propeller regimes when combined with other parameters.
This article draws lessons from experiences of developing the photovoltaic (PV) and onshore wind power sectors in China for the development of Chinese Concentrated Solar Power (CSP) into an internationally competitive industry. We analyze the sectoral development with a framework that expands on the concept of lead markets, identifying factors that determine whether domestic industrial development paths may or may not generate export success. We find that the Chinese CSP sector has good potential for becoming internationally competitive because of a strong Chinese knowledge base, a clear eye for product quality, standard-setting, and a focus on the high-efficiency and large-storage technological routes most likely to see growing demand in future international markets. Chinese solar towers are already cheaper than international competitors and so far, appear reliable. However, continued and stable deployment support for CSP, designed to reward dispatchable solar power generation, enabling continued domestic learning-by-doing and -interacting is likely required to realize this export potential. To date, Chinese CSP policy has done many things right and, if the domestic market is maintained through renewed support, has put the Chinese industry well on the path to international competitiveness.
Background: Prenatal maternal stress might be a risk for the developing fetus and may have long-lasting effects on child and adult vulnerability to somatic and psychiatric disease. Over-exposure of the unborn to excess glucocorticoids and subsequent alteration of fetal development is hypothesized to be one of the key mechanisms linking prenatal stress with negative child outcome. Methods: In this prospective longitudinal study, mothers-to-be (n = 405) in late pregnancy (36.8 +/- 1.9 weeks of gestational age) and their singleton neonates were studied. We investigated the impact of different prenatal stress indices derived from six stress variables (perceived stress, specific prenatal worries, negative life events, symptoms of depression, trait anxiety, neuroticism) and diurnal maternal saliva cortisol secretion on gestational age and anthropometric measures at birth.
Many lakes exhibit seasonal stratification, during which they develop strong thermal and chemical gradients. An expansion of depth-integrated monitoring programs has provided insight into the importance of organic carbon processing that occurs below the upper mixed layer. However, the chemical and physical drivers of metabolism and metabolic coupling remain unresolved, especially in the metalimnion. In this depth zone, sharp gradients in key resources such as light and temperature co-occur with dynamic physical conditions that influence metabolic processes directly and simultaneously hamper the accurate tracing of biological activity. We evaluated the drivers of metalimnetic metabolism and its associated uncertainty across 10 stratified lakes in Europe and North America. We hypothesized that the metalimnion would contribute highly to whole-lake functioning in clear oligotrophic lakes, and that metabolic rates would be highly variable in unstable polymictic lakes. Depth-integrated rates of gross primary production (GPP) and ecosystem respiration (ER) were modelled from diel dissolved oxygen curves using a Bayesian approach. Metabolic estimates were more uncertain below the epilimnion, but uncertainty was not consistently related to lake morphology or mixing regime. Metalimnetic rates exhibited high day-to-day variability in all trophic states, with the metalimnetic contribution to daily whole-lake GPP and ER ranging from 0% to 87% and < 1% to 92%, respectively. Nonetheless, the metalimnion of low-nutrient lakes contributed strongly to whole-lake metabolism on average, driven by a collinear combination of highlight, low surface-water phosphorous concentration and high metalimnetic volume. Consequently, a single-sensor approach does not necessarily reflect whole-ecosystem carbon dynamics in stratified lakes.
Extreme weather events can pervasively influence ecosystems. Observations in lakes indicate that severe storms in particular can have pronounced ecosystem-scale consequences, but the underlying mechanisms have not been rigorously assessed in experiments. One major effect of storms on lakes is the redistribution of mineral resources and plankton communities as a result of abrupt thermocline deepening. We aimed at elucidating the importance of this effect by mimicking in replicated large enclosures (each 9 m in diameter, ca. 20 m deep, ca. 1300 m 3 in volume) a mixing event caused by a severe natural storm that was previously observed in a deep clear-water lake. Metabolic rates were derived from diel changes in vertical profiles of dissolved oxygen concentrations using a Bayesian modelling approach, based on high-frequency measurements. Experimental thermocline deepening stimulated daily gross primary production (GPP) in surface waters by an average of 63% for > 4 weeks even though thermal stratification re-established within 5 days. Ecosystem respiration (ER) was tightly coupled to GPP, exceeding that in control enclosures by 53% over the same period. As GPP responded more strongly than ER, net ecosystem productivity (NEP) of the entire water column was also increased. These protracted increases in ecosystem metabolism and autotrophy were driven by a proliferation of inedible filamentous cyanobacteria released from light and nutrient limitation after they were entrained from below the thermocline into the surface water. Thus, thermocline deepening by a single severe storm can induce prolonged responses of lake ecosystem metabolism independent of other storm-induced effects, such as inputs of terrestrial materials by increased catchment run-off. This highlights that future shifts in frequency, severity or timing of storms are an important component of climate change, whose impacts on lake thermal structure will superimpose upon climate trends to influence algal dynamics and organic matter cycling in clear-water lakes. Keywords: climate variability, ecosystem productivity, extreme events, gross primary production, mesocosm, respiration stratified lakes
Scale-dependent determinants of plant species richness in a semi-arid fragmented agro-ecosystem
(2011)
Aims: (1) Understanding how the relationship between species richness and its determinants depends on the interaction between scales at which the response and explanatory variables are measured. (2) Quantifying the relative contributions of local, intermediate and large-scale determinants of species richness in a fragmented agro-ecosystem. (3) Testing the hypothesis that the relative contribution of these determinants varies with the grain size at which species richness is measured.
Location: A fragmented agro-ecosystem in the Southern Judea Lowland, Israel, within a desert-Mediterranean transition zone.
Methods: Plant species richness was estimated using hierarchical nested sampling in 81 plots, positioned in 38 natural vegetation patches within an agricultural matrix (mainly wheat fields) among three land units along a sharp precipitation gradient. Explanatory variables included position along that gradient, patch area, patch isolation, habitat heterogeneity and overall plant density. We used general linear models and hierarchical partitioning of variance to test and quantify the effect of each explanatory variable on species richness at four grain sizes (0.0625, 1, 25 and 225m(2)).
Results: Species richness was mainly affected by position along a precipitation gradient and overall plant density, and to a lesser extent by habitat heterogeneity. It was also significantly affected by patch area and patch isolation, but only for small grain sizes. The contribution of each explanatory variable to explained variance in species richness varied with grain size, i.e. scale-dependent. The influence of geographic position and habitat heterogeneity on species richness increased with grain size, while the influence of plant density decreased with grain size.
Main conclusions: Species richness is determined by the combined effect of several scale-dependent determinants. Ability to detect an effect and effect size of each determinant varies with the scale (grain size) at which it is measured. The combination of a multi-factorial approach and multi-scale sampling reveals that conclusions drawn from studies that ignore these dimensions are restricted and potentially misleading.
Aim Patterns that relate species richness with fragment area (the species-area relationship, SAR) and with isolation (the species-isolation relationship, SIR) are well documented. However, those that relate species density - the number of species within a standardized area - with fragment area (D-SAR) or isolation (D-SIR) have not been sufficiently explored, despite the potential for such an analysis to disentangle the underlying mechanisms of SARs and SIRs. Previous spatial theory predicts that a significant D-SAR or D-SIR is unlikely to emerge in taxa with high dispersal limitation, such as plants. Furthermore, a recent model predicts that the detection and the significance of D-SARs or D-SIRs may decrease with grain size. We combined a literature review with grain size-dependent sampling in a fragmented landscape to evaluate the prevalence and grain size-dependent nature of D-SARs and D-SIRs in plants. Location Worldwide (review) and a semi-arid agro-ecosystem in Israel (case study). Methods We combined an extensive literature review of 31 D-SAR studies of plants in fragmented landscapes with an empirical study in which we analysed grain size-dependent D-SARs and D-SIRs using a grain size-dependent hierarchical sampling of species density and species richness in a fragmented, semi-arid agro-ecosystem. Results We found that significantly increasing D-SARs are rare in plant studies. Furthermore, we found that the detection of a significant D-SAR is often possible only after the data have been stratified by species, habitat or landscape characteristics. The results from our case study indicated that the significance and the slopes of both D-SARs and D-SIRs increase as grain size decreases. Main conclusions These results call for a careful consideration of scale while analysing and interpreting the responses of species richness and species density to fragmentation. Our results suggest that grain size-dependent analyses of D-SARs and D-SIRs may help to disentangle the mechanisms that generate SARs and SIRs and may enable early detection of the effects of fragmentation on plant biodiversity.
In this thesis the gravitational lensing effect is used to explore a number of cosmological topics. We determine the time delay in the gravitationally lensed quasar system HE1104-1805 using different techniques. We obtain a time delay Delta_t(A-B) Delta_t(A-B) =-310 +- 20 days (2 sigma errors) between the two components. We also study the double quasar Q0957+561 during a three years monitoring campaign. The fluctuations we find in the difference light curves are completely consistent with noise and no microlensing is needed to explain these fluctuations. Microlensing is also studied in the quadruple quasar Q2237+0305 during the GLITP collaboration (Oct.1999-Feb.2000). We use the absence of a strong microlensing signal to obtain an upper limit of v=600 km/s for the effective transverse velocity of the lens galaxy (considering microlenses with 0.1 solar masses). The distribution of dark matter in galaxy clusters is also studied in the second part of the thesis. In the cluster of galaxies Cl0024+1654 we obtain a mass-to-light ratio of M/L = 200 M_sun/L_sun (within a radius of 3 arcminutes). In the galaxy cluster RBS380 we find a relatively low X-ray luminosity for a massive cluster of L =2*10^(44) erg/s, but a rich distribution of galaxies in the optical band.
We present a new determination of the time delay of the gravitational lens system HE 1104-1805 (``Double Hamburger'') based on a previously unpublished dataset. We argue that the previously published value of Delta tA-B=0.73 years was affected by a bias of the employed method. We determine a new value of Delta tA-B=0.85+/-0.05 years (2sigma confidence level), using six different techniques based on non interpolation methods in the time domain. The result demonstrates that even in the case of poorly sampled lightcurves, useful information can be obtained with regard to the time delay. The error estimates were calculated through Monte Carlo simulations. With two already existing models for the lens and using its recently determined redshift, we infer a range of values of the Hubble parameter: H0=48+/-4 km s-1 Mpc-1 (2sigma ) for a singular isothermal ellipsoid (SIE) and H0=62+/-4 km s-1 Mpc-1 (2sigma ) for a constant mass-to-light ratio plus shear model (M/L+gamma ). The possibly much larger errors due to systematic uncertainties in modeling the lens potential are not included in this error estimate.
We present CHANDRA X-ray and NTT optical observations of the distant z=0.52 galaxy cluster RBS380 -- the most distant cluster of the ROSAT Bright Source (RBS) catalogue. We find diffuse, non-spherically symmetric X-ray emission with a X-ray luminosity of L_X(0.3-10 keV)=1.6 10^(44) erg/s, which is lower than expected from the RBS. The reason is a bright AGN in the centre of the cluster contributing considerably to the X-ray flux. This AGN could not be resolved with ROSAT. In optical wavelength we identify several galaxies belonging to the cluster. The galaxy density is at least 2 times higher than expected for such a X-ray faint cluster, which is another confirmation of the weak correlation between X-ray luminosity and optical richness. The example of the source confusion in this cluster shows how important high- resolution X-ray imaging is for cosmological research.