Refine
Has Fulltext
- yes (302) (remove)
Year of publication
Document Type
- Doctoral Thesis (302) (remove)
Language
- English (302) (remove)
Keywords
- Fernerkundung (14)
- Erdbeben (12)
- remote sensing (12)
- Anden (11)
- Andes (11)
- Klimawandel (11)
- climate change (11)
- Tektonik (10)
- Erosion (9)
- Geomorphologie (9)
Institute
- Institut für Geowissenschaften (302) (remove)
A multidisciplinary study has been carried out to contribute to the understanding of the geologic evolution of the largest known occurrence of ultra-high-pressure (UHP) rocks on Earth, the Dabie Shan of eastern China. Geophysical data, collected along a ca. 20 km E-W trending seismic line in the eastern Dabie Shan, indicate that the crust comprises three layers. The upper crust has a homogeneously low reflectivity and exhibits roughly subhorizontal reflectors down to ca. 15 km. It is therefore interpreted to portray a crustal UHP slab thrust over non-UHP crust. An aprubt change in intensity and geometry of observed reflectors marks the boundary of a mid- to lower crustal zone which is present down to ca. 33 km. This crustal zone likely represents cratonal Yangtze crust that was unaffected by the Triassic UHP event and which has acted as the footwall during exhumation of the crustal wedge. Strong and continuous reflectors occurring at ca. 33-40 km depth most likely trace the Moho at the base of the crust. Any trace of a crustal root, that may have formed in response to collision tectonics, is therefore not preserved. A shollow tomographic velocity modell based on inversion of the first arrivals is constructed additionally. This model clearly images the distinct lithologies on both sides of the Tan Lu fault. Sediments to the east exhibit velocities of about 3.4 - 5.0 km* s^-1, whereas the gneisses have 5.2 - 6.0 km*s^-1. Geometry of velocity isolines may trace the structures present in the rocks. Thus the sediments dip shallowly towards the fault, whereas isoclinal folds are imaged to occur in the gneisses. Field data from the UHP unit of the Dabie Shan enables definition of basement-cover sequences that represent sections of the former passive margin of the Yangtze craton. One of the cover sequences, the Changpu unit, still displays a stratigraphic contact with basement gneisses, while the other, the Ganghe unit, includes no relative basement exposure. The latter unit is in tectonic contact with the basement of the former unit via a greenschist-facies blastomylonite. The Changpu unit is chiefly constituted by calc-arenitic metasediments intercalated with meta-basalts, whereas the Ganghe unit contains arenitic-volcanoclastic metasediments that are likewise associated with meta-basalts. The basement comprises a variety of felsic gneisses, ranging from preserved eclogitic- to greenschist-facies paragenesis, and locally contains mafic-ultramafic meta-plutons in addition to minor basaltic rocks. Metabasites of all lithologies are eclogite-facies or are retrogressed equivalents, which, with the exception of those from the Ganghe unit, bear coesite and thus testify to an UHP metamorphic overprint. Mineral chemistry of the analysed samples reveal large compositional variations among the main minerals, i.e. garnet and omphacite, indicating either distinct protoliths or different degrees of interaction with their host-rocks. Contents of ferric iron in low Fetot omphacites are determined by wet chemical titration and found to be rather high, i.e. 30-40 %. However, a even more conservative estimate of 50% is applied in the corresponding calculations, in order to be comparable with previous studies. Textural constraints and compositional zonation pattern are compatible with equilibrium conditions during peak metamorphism followed by a retrogressive overprint. P-T data are calculated with special focus on the application of the garnet-omphacite-phengite barometer, combined with Fe-Mg exchange thermometers. Maximum pressures range from 42-48 kbar (for the Changpu unit) to ~37 kbar (for the Ganghe unit and basement rocks). Temperatures during the eclogite metamorphism reached ca. 750 °C. Although the sample suite reveals variable peak-pressures, temperatures are in reasonable agreement. Pressure differences are interpreted to be due to strongly Ca-dominated garnet (up to 50 mol % grossular in the Changpu unit) and modification of peak-compositions during retrogressive metamorphism. The integrated geological data presented in this thesis allow it to be concluded that, i) basement and cover rocks are present in the Dabie Shan and both experienced UHP conditions ii) the Dabie Shan is the metamorphic equivalent of the former passive margin of the Yangtze craton iii) felsic gneisses undergoing UHP metamorphism are affected by volume changes due to phase transitions (qtz <-> coe), which directly influence the tectono-metamorphic processes iv) initial differences in temperature may account for the general lack of lower crustal rocks in UHP-facies
Merapi volcano is one of the most active and dangerous volcanoes of the earth. Located in central part of Java island (Indonesia), even a moderate eruption of Merapi poses a high risk to the highly populated area. Due to the close relationship between the volcanic unrest and the occurrence of seismic events at Mt. Merapi, the monitoring of Merapi's seismicity plays an important role for recognizing major changes in the volcanic activity. An automatic seismic event detection and classification system, which is capable to characterize the actual seismic activity in near real-time, is an important tool which allows the scientists in charge to take immediate decisions during a volcanic crisis. In order to accomplish the task of detecting and classifying volcano-seismic signals automatically in the continuous data streams, a pattern recognition approach has been used. It is based on the method of hidden Markov models (HMM), a technique, which has proven to provide high recognition rates at high confidence levels in classification tasks of similar complexity (e.g. speech recognition). Any pattern recognition system relies on the appropriate representation of the input data in order to allow a reasonable class-decision by means of a mathematical test function. Based on the experiences from seismological observatory practice, a parametrization scheme of the seismic waveform data is derived using robust seismological analysis techniques. The wavefield parameters are summarized into a real-valued feature vector per time step. The time series of this feature vector build the basis for the HMM-based classification system. In order to make use of discrete hidden Markov (DHMM) techniques, the feature vectors are further processed by applying a de-correlating and prewhitening transformation and additional vector quantization. The seismic wavefield is finally represented as a discrete symbol sequence with a finite alphabet. This sequence is subject to a maximum likelihood test against the discrete hidden Markov models, learned from a representative set of training sequences for each seismic event type of interest. A time period from July, 1st to July, 5th, 1998 of rapidly increasing seismic activity prior to the eruptive cycle between July, 10th and July, 19th, 1998 at Merapi volcano is selected for evaluating the performance of this classification approach. Three distinct types of seismic events according to the established classification scheme of the Volcanological Survey of Indonesia (VSI) have been observed during this time period. Shallow volcano-tectonic events VTB (h < 2.5 km), very shallow dome-growth related seismic events MP (h < 1 km) and seismic signals connected to rockfall activity originating from the active lava dome, termed Guguran. The special configuration of the digital seismic station network at Merapi volcano, a combination of small-aperture array deployments surrounding Merapi's summit region, allows the use of array methods to parametrize the continuously recorded seismic wavefield. The individual signal parameters are analyzed to determine their relevance for the discrimination of seismic event classes. For each of the three observed event types a set of DHMMs has been trained using a selected set of seismic events with varying signal to noise ratios and signal durations. Additionally, two sets of discrete hidden Markov models have been derived for the seismic noise, incorporating the fact, that the wavefield properties of the ambient vibrations differ considerably during working hours and night time. A total recognition accuracy of 67% is obtained. The mean false alarm (FA) rate can be given by 41 FA/class/day. However, variations in the recognition capabilities for the individual seismic event classes are significant. Shallow volcano-tectonic signals (VTB) show very distinct wavefield properties and (at least in the selected time period) a stable time pattern of wavefield attributes. The DHMM-based classification performs therefore best for VTB-type events, with almost 89% recognition accuracy and 2 FA/day. Seismic signals of the MP- and Guguran-classes are more difficult to detect and classify. Around 64% of MP-events and 74% of Guguran signals are recognized correctly. The average false alarm rate for MP-events is 87 FA/day, whereas for Guguran signals 33 FA/day are obtained. However, the majority of missed events and false alarms for both MP and Guguran events are due to confusion errors between these two event classes in the recognition process. The confusion of MP and Guguran events is interpreted as being a consequence of the selected parametrization approach for the continuous seismic data streams. The observed patterns of the analyzed wavefield attributes for MP and Guguran events show a significant amount of similarity, thus providing not sufficient discriminative information for the numerical classification. The similarity of wavefield parameters obtained for seismic events of MP and Guguran type reflect the commonly observed dominance of path effects on the seismic wave propagation in volcanic environments. The recognition rates obtained for the five-day period of increasing seismicity show, that the presented DHMM-based automatic classification system is a promising approach for the difficult task of classifying volcano-seismic signals. Compared to standard signal detection algorithms, the most significant advantage of the discussed technique is, that the entire seismogram is detected and classified in a single step.
Combined structural and magnetotelluric investigation across the West Fault Zone in northern Chile
(2002)
The characterisation of the internal architecture of large-scale fault zones is usually restricted to the outcrop-based investigation of fault-related structural damage on the Earth's surface. A method to obtain information on the downward continuation of a fault is to image the subsurface electrical conductivity structure. This work deals with such a combined investigation of a segment of the West Fault, which itself is a part of the more than 2000 km long trench-linked Precordilleran Fault System in the northern Chilean Andes. Activity on the fault system lasted from Eocene to Quaternary times. In the working area (22°04'S, 68°53'W), the West Fault exhibits a clearly defined surface trace with a constant strike over many tens of kilometers. Outcrop condition and morphology of the study area allow ideally for a combination of structural geology investigation and magnetotelluric (MT) / geomagnetic depth sounding (GDS) experiments. The aim was to achieve an understanding of the correlation of the two methods and to obtain a comprehensive view of the West Fault's internal architecture. Fault-related brittle damage elements (minor faults and slip-surfaces with or without striation) record prevalent strike-slip deformation on subvertically oriented shear planes. Dextral and sinistral slip events occurred within the fault zone and indicate reactivation of the fault system. Youngest deformation increments mapped in the working area are extensional and the findings suggest a different orientation of the extension axes on either side of the fault. Damage element density increases with approach to the fault trace and marks an approximately 1000 m wide damage zone around the fault. A region of profound alteration and comminution of rocks, about 400 m wide, is centered in the damage zone. Damage elements in this central part are predominantly dipping steeply towards the east (70-80°). Within the same study area, the electrical conductivity image of the subsurface was measured along a 4 km long MT/GDS profile. This main profile trends perpendicular to the West Fault trace. The MT stations of the central 2 km were 100 m apart from each other. A second profile with 300 m site spacing and 9 recording sites crosses the fault a few kilometers away from the main study area. Data were recorded in the frequency range from 1000 Hz to 0.001 Hz with four real time instruments S.P.A.M. MkIII. The GDS data reveal the fault zone for both profiles at frequencies above 1 Hz. Induction arrows indicate a zone of enhanced conductivity several hundred meters wide, that aligns along the WF strike and lies mainly on the eastern side of the surface trace. A dimensionality analysis of the MT data justifies a two dimensional model approximation of the data for the frequency range from 1000 Hz to 0.1 Hz. For this frequency range a regional geoelectric strike parallel to the West Fault trace could be recovered. The data subset allows for a resolution of the conductivity structure of the uppermost crust down to at least 5 km. Modelling of the MT data is based on an inversion algorithm developed by Mackie et al. (1997). The features of the resulting resistivity models are tested for their robustness using empirical sensitivity studies. This involves variation of the properties (geometry, conductivity) of the anomalies, the subsequent calculation of forward or constrained inversion models and check for consistency of the obtained model results with the data. A fault zone conductor is resolved on both MT profiles. The zones of enhanced conductivity are located to the east of the West Fault surface trace. On the dense MT profile, the conductive zone is confined to a width of about 300 m and the anomaly exhibits a steep dip towards the east (about 70°). Modelling implies that the conductivity increase reaches to a depth of at least 1100 m and indicates a depth extent of less than 2000 m. Further conductive features are imaged but their geometry is less well constrained. The fault zone conductors of both MT profiles coincide in position with the alteration zone. For the dense profile, the dip of the conductive anomaly and the dip of the damage elements of the central part of the fault zone correlate. This suggests that the electrical conductivity enhancement is causally related to a mesh of minor faults and fractures, which is a likely pathway for fluids. The interconnected rock-porosity that is necessary to explain the observed conductivity enhancement by means of fluids is estimated on the basis of the salinity of several ground water samples (Archie's Law). The deeper the source of the water sample, the more saline it is due to longer exposure to fluid-rock interaction and the lower is the fluid's resistivity. A rock porosity in the range of 0.8% - 4% would be required at a depth of 200 m. That indicates that fluids penetrating the damaged fault zone from close to the surface are sufficient to explain the conductivity anomalies. This is as well supported by the preserved geochemical signature of rock samples in the alteration zone. Late stage alteration processes were active in a low temperature regime (<95°C) and the involvement of ascending brines from greater depth is not indicated. The limited depth extent of the fault zone conductors is a likely result of sealing and cementation of the fault fracture mesh due to dissolution and precipitation of minerals at greater depth and increased temperature. Comparison of the results of the apparently inactive West Fault with published studies on the electrical conductivity structure of the currently active San Andreas Fault, suggests that the depth extent and conductivity of the fault zone conductor may be correlated to fault activity. Ongoing deformation will keep the fault/fracture mesh permeable for fluids and impede cementation and sealing of fluid pathways.
Late Miocene to Quaternary volcanic rocks from the frontal arc to the back-arc region of the Central Volcanic Zone in the Andes show a wide range of delta 11B values (+4 to -7 ‰) and boron concentrations (6 to 60 ppm). Positive delta 11B values of samples from the volcanic front indicate involvement of a 11B-enriched slab component, most likely derived from altered oceanic crust, despite the thick Andean continental lithosphere, and rule out a pure crust-mantle origin for these lavas. The delta 11B values and B concentrations in the lavas decrease systematically with increasing depth of the Wadati-Benioff Zone. This across-arc variation in delta 11B values and decreasing B/Nb ratios from the arc to the back-arc samples are attributed to the combined effects of B-isotope fractionation during progressive dehydration in the slab and a steady decrease in slab-fluid flux towards the back arc, coupled with a relatively constant degree of crustal contamination as indicated by similar Sr, Nd and Pb isotope ratios in all samples. Modelling of fluid-mineral B-isotope fractionation as a function of temperature fits the across-arc variation in delta 11B and we conclude that the B-isotope composition of arc volcanics is dominated by changing delta 11B composition of B-rich slab-fluids during progressive dehydration. Crustal contamination becomes more important towards the back-arc due to the decrease in slab-derived fluid flux. Because of this isotope fractionation effect, high delta 11B signatures in volcanic arcs need not necessarily reflect differences in the initial composition of the subducting slab. Three-component mixing calculations for slab-derived fluid, the mantle wedge and the continental crust based on B, Sr and Nd isotope data indicate that the slab-fluid component dominates the B composition of the fertile mantle and that the primary arc magmas were contaminated by an average addition of 15 to 30 % crustal material.
In this work, an approach of paleoclimate reconstruction for tropical East Africa is presented. After giving a short summary of modern climate conditions in the tropics and the East African climate peculiarity, the potential of reconstructing climate from paleolake sediments is discussed. As demonstrated, the hydrologic sensitivity of high-elevated closed-basin lakes in the Central Kenya Rift yields valuable guaranties for the establishment of long-term climate records. Temporal fluctuations of the limnological characteristics saved in the lake sediments are used to define variations in the Quaternary climate history. Based on diatom analyses in radiocarbon- and 40Ar/39Ar-dated sediments, a chronology of paleoecologic fluctuations is developed for the Central Kenya Rift -lakes Nakuru, Elmenteita and Naivasha. At least during the penultimate interglacial (around 140 to 60 kyr BP) and during the last interglacial (around 12 to 4 kyr BP), these lakes experienced several transgression-regression cycles on time intervals of about 11,000 years. Additionally, a long-term trend of lake evolution is found suggesting the general succession from deep freshwater lakes towards more saline waters during the last million years. Using ecologic transfer functions and a simple lake-balance model, the observed paleohydrologic fluctuations are linked to potential precipitation-evaporation changes in the lake basins. Though also tectonic influences on the drainage pattern and the effect of varied seepage are investigated, it can be shown that already a small increase in precipitation of about 30±10 % may have affected the hydrologic budget of the intra-rift lakes within the reconstructed range. The findings of this study help to assess the natural climate variability of East Africa. They furthermore reflect the sensitivity of the Central Kenya Rift -lakes to fluctuations of large-scale climate parameters, such as solar radiation and sea-surface temperatures of the Indian Ocean.
The P- and S-wave velocity structure of the D” layer beneath the southwestern Pacific was investigated by using short-period data from 12 deep events in the Tonga-Fiji region recorded by the J-Array and the Hi-net in Japan. A migration method and reflected wave beamforming (RWB) were used in order to extract weak signals originating from small-scale heterogeneities in the lowermost mantle. In order to acquire high resolution, a double array method (DAM) which integrates source array beamforming with receiver array beamforming was applied to the data. A phase-weighted stacking technique, which reduces incoherent noise by employing complex trace analysis, was also applied to the data, amplifying the weak coherent signals from the lowermost mantle. This combination greatly enhances small phases common to the source and receiver beams. The results of the RWB method indicate that seismic energy is reflected at discontinuities near 2520 km and 2650 km, which have a negative P-wave velocity contrast of 1 % at the most. In addition, there is a positive seismic discontinuity at a depth of 2800 km. In the case of the S-wave, reflected energy is produced almost at the same depth (2550 km depth). The different depth (50 km) between the P-wave velocity discontinuity at the depth of 2800 and a further S-wave velocity discontinuity at the depth of 2850 km may indicate that the S-wave velocity reduction in the lowermost mantle is about 2-3 times stronger that that of P wave. A look at a 2D cross section, constructed with the RWB method, suggests that the observed discontinuities can be characterized as intermittent lateral heterogeneities whose lateral extent is a few hundred km, and that the CMB might have undulations on a scale of less than 10 km in amplitude. The migration shows only weak evidence for the existence of scattering objects. Heterogeneous regions in the migration belong to the detected seismic discontinuities. These anomalous structures may represent a part of hot plume generated beneath the southwestern Pacific in the lowermost mantle.
This study investigated the slope carbonates of two Miocene carbonate systems: the Maltese Islands (in the Central Mediterranean) and the Marion Plateau (Northeastern Australia, drilled during ODP Leg 194). The aim of the study was to trace the impact of the Miocene cooling steps (events Mi1-Mi6) in these carbonate systems, especially the Mi3 event, which took place around 13.6 Ma and deeply impacted the marine oxygen isotope record. This event also profoundly impacted oceanographic and climatic patterns, eventually leading to the establishment of the modern ice-house world. In particular, East Antarctica became ice covered at that period. The rational behind the present study was to investigate the impact that this event had on shallow water systems in order to complement the deep-sea record and hence acquire a more global perspective on Miocene climate change. The Maltese Islands were investigated for trends in bulk-rock carbon and oxygen isotopes, as well as bulk-rock mineralogy, clay minerals analysis and organic geochemisty. Results showed that the mid Miocene cooling event deeply impacted sedimentation at that location by changing sedimentation from carbonate to clay-rich sediments. Moreover, it was discovered that each phase of Antarctic glaciation, not just the major mid Miocene event, resulted in higher terrigenous input on Malta. Mass accumulation rates revealed that this was linked to increased runoff during periods when Antarctica was glaciated, and thus that the carbonate sediments were “diluted” by clay-rich sediments. The model subsequently developed to explain this implies feedback from Antarctic glaciations creating cold, dense air masses that push the ITCZ Northward, thus increasing precipitation on the North African subcontinent. Increased precipitation (or stronger African monsoon) accelerated continental weathering and runoff, thus bringing more terrigenous sediment to the paleo-location of the slope sediments of Malta. Spectral analysis of carbonate content and organic matter geochemical analysis furthermore suggest that the clay-rich intervals are similar to sapropelic deposits. On the Marion Plateau, trends in oxygen and carbon isotopes were obtained by measuring Cibicidoides spp foraminifers. Moreover, carbonate content was reconstructed using a chemical method (coulometer). Results show that the mid Miocene cooling step profoundly affected this system: a major drop in accumulation rates of carbonates occurs precisely at 13.8 Ma, around the time of the East Antarctic ice sheet formation. Moreover, sedimentation changes occurred at that time, carbonate fragments coming from neritic environments becoming less abundant, planktonic foraminifer content increasing and quartz and reworked glauconite being deposited. Conversely, a surprising result is that the major N12-N14 sea-level fall occurring around 11.5 Ma did not impact the accumulation of carbonates on the slope. This was unexpected since carbonate platform are very sensitive to sea-level changes. The model developed to explain that mass accumulation rates of carbonates diminished around 13.6 Ma (Mi3 Event) instead of 11.5 Ma (N12-N14 event), suggests that oceanic currents were controlling slope carbonate deposition on the Marion Plateau prior to the mid-Miocene, and that the mid Miocene event considerably increase their strength, hence reducing the amount of carbonate being deposited on slope sites. Moreover, by combining results from deep-sea oxygen isotopes with sea-level estimates based on coastal onlaps made during Leg 194, we constrain the amplitude of the N12-N14 sea-level fall to 90 meters. When integrating isotopic results from this study, this amplitude is lowered to 70 meters. A general conclusion of this work is that the mid Miocene climatic shift did impact carbonate systems, at least at the two locations studied. However, the nature of this response was highly dependant on the regional settings, in particular the presence of land mass (Malta) and the absence of a barrier to shelter from the effects of open ocean (Marion Plateau).
Western Anatolia that represents the eastward lateral continuation of the Aegean domain is composed of several tectono-metamorphic units showing occurrences of high-pressure/low-temperature (HP-LT) rocks. While some of these metamorphic rocks are vestiges of the Pan-African or Cimmerian orogenies, others are the result of the more recent Alpine orogenesis. In southwest Turkey, the Menderes Massif occupies an extensive area tectonically overlain by nappe units of the Izmir-Ankara Suture Zone in the north, the Afyon Zone in the east, and the Lycian Nappes in the south. In the present study, investigations in the metasediments of the Lycian Nappes and underlying southern Menderes Massif revealed widespread occurrences of Fe-Mg-carpholite-bearing rocks. This discovery leads to the very first consideration that both nappe complexes recorded HP-LT metamorphic conditions during the Alpine orogenesis. P-T conditions for the HP metamorphic peak are about 10-12 kbar/400°C in the Lycian Nappes, and 12-14 kbar/470-500°C in the southern Menderes Massif, documenting a burial of at least 30 km during subduction and nappe stacking. Ductile deformation analysis in concert with multi-equilibrium thermobarometric calculations reveals that metasediments from the Lycian Nappes recorded distinct exhumation patterns after a common HP metamorphic peak. The rocks located far from the contact separating the Lycian Nappes and the Menderes Massif, where HP parageneses are well preserved, retained a single HP cooling path associated with top-to-the-NNE shearing related to the Akçakaya shear zone. This zone of strain localization is an intra-nappe contact that was active in the early stages of exhumation of HP rocks, within the stability field of Fe-Mg-carpholite. The rocks located close to the contact with the Menderes Massif, where HP parageneses are completely retrogressed into chlorite and mica, recorded warmer exhumation paths associated with top-to-the-E intense shearing. This deformation occurred after the southward emplacement of Lycian Nappes, and is contemporaneous with the reactivation of the ’Lycian Nappes-Menderes Massif′ contact as a major shear zone (the Gerit shear zone) that allowed late exhumation of HP parageneses under warmer conditions. The HP rocks from the southern Menderes Massif recorded a simple isothermal decompression at about 450°C during exhumation, and deformation during HP event and its exhumation is characterized by a severe N-S to NE-SW stretching. The age of the HP metamorphism recorded in the Lycian Nappes is assumed to range between the Latest Cretaceous (age of the youngest sediments in the Lycian allochthonous unit) and the Eocene (age of the Cycladic Blueschists). A probable Palaeocene age is suggested. The age of the HP metamorphism that affected the cover series of the Menderes Massif is constrained between the Middle Palaeocene (age of the uppermost metaolistostrome of the Menderes ’cover′) and the Middle Eocene (age of the HP metamorphism in the Dilek-Selçuk region that belongs to the Cycladic Complex). Apatite fission track data for the rocks on both sides of the ’Lycian Nappes/Menderes Massif’ contact suggest that these rocks were very close to the paleo-Earth surface in the Late Oligocene-Early Miocene time. This study in the Lycian Nappes and in the Menderes Massif establishes the existence of an extensive Alpine HP metamorphic belt in southwest Turkey. HP rocks were involved in the accretionary complex related to northward-verging subduction of the Neo-Tethys Ocean, Late Cretaceous obduction and subsequent Early Tertiary continental collision of the passive margin (Anatolide-Tauride block) beneath the active margin of the northern plate (Sakarya micro-continent). During the Eocene, the accretionary complex was made of three stacked HP units. The lowermost corresponds to the imbricated ’core′ and HP ’cover′ of the Menderes Massif, the intermediate one consists of the Cycladic Blueschist Complex (Dilek-Selçuk unit), and the uppermost unit is made of the HP Lycian Nappes. Whereas the basement units of both Aegean and Anatolian regions underwent a different pre-Mesozoic tectonic history, they were probably juxtaposed by the end of the Paleozoic and underwent a common Mesozoic history. Then, the basements and their cover, as well as the Cycladic Blueschists and the Lycian Nappes were involved in similar evolutional accretionary complexes during the Eocene and Oligocene times.
Paleomagnetic dating of climatic events in Late Quaternary sediments of Lake Baikal (Siberia)
(2004)
Lake Baikal provides an excellent climatic archive for Central Eurasia as global climatic variations are continuously depicted in its sediments. We performed continuous rock magnetic and paleomagnetic analyses on hemipelagic sequences retrieved from 4 underwater highs reaching back 300 ka. The rock magnetic study combined with TEM, XRD, XRF and geochemical analyses evidenced that a magnetite of detrital origin dominates the magnetic signal in glacial sediments whereas interglacial sediments are affected by early diagenesis. HIRM roughly quantifies the hematite and goethite contributions and remains the best proxy for estimating the detrital input in Lake Baikal. Relative paleointensity records of the earth′s magnetic field show a reproducible pattern, which allows for correlation with well-dated reference curves and thus provides an alternative age model for Lake Baikal sediments. Using the paleomagnetic age model we observed that cooling in the Lake Baikal region and cooling of the sea surface water in the North Atlantic, as recorded in planktonic foraminifera δ18 O, are coeval. On the other hand, benthic δ18 O curves record mainly the global ice volume change, which occurs later than the sea surface temperature change. This proves that a dating bias results from an age model based on the correlation of Lake Baikal sedimentary records with benthic δ18 O curves. The compilation of paleomagnetic curves provides a new relative paleointensity curve, “Baikal 200”. With a laser-assisted grain size analysis of the detrital input, three facies types, reflecting different sedimentary dynamics can be distinguished. (1) Glacial periods are characterised by a high clay content mostly due to wind activity and by occurrence of a coarse fraction (sand) transported over the ice by local winds. This fraction gives evidence for aridity in the hinterland. (2) At glacial/interglacial transitions, the quantity of silt increases as the moisture increases, reflecting increased sedimentary dynamics. Wind transport and snow trapping are the dominant process bringing silt to a hemipelagic site (3) During the climatic optimum of the Eemian, the silt size and quantity are minimal due to blanketing of the detrital sources by the vegetal cover.
Following work is embedded in the multidisciplinary study DESERT (DEad SEa Rift Transect) that has been carried out in the Middle East since the beginning of the year 2000. It focuses on the structure of the southern Dead Sea Transform (DST), the transform plate boundary between Africa (Sinai) and the Arabian microplate. The left-lateral displacement along this major active strike-slip fault amounts to more than 100 km since Miocene times. The DESERT near-vertical seismic reflection (NVR) experiment crossed the DST in the Arava Valley between Red Sea and Dead Sea, where its main fault is called Arava Fault. The 100 km long profile extends in a NW—SE direction from Sede Boqer/Israel to Ma'an/Jordan and coincides with the central part of a wide-angle seismic refraction/reflection line. Near-vertical seismic reflection studies are powerful tools to study the crustal architecture down to the crust/mantle boundary. Although they cannot directly image steeply dipping fault zones, they can give indirect evidence for transform motion by offset reflectors or an abrupt change in reflectivity pattern. Since no seismic reflection profile had crossed the DST before DESERT, important aspects of this transform plate boundary and related crustal structures were not known. Thus this study aimed to resolve the DST's manifestation in both the upper and the lower crust. It was to show, whether the DST penetrates into the mantle and whether it is associated with an offset of the crust/mantle boundary, which is observed at other large strike-slip zones. In this work a short description of the seismic reflection method and the various processing steps is followed by a geological interpretation of the seismic data, taking into account relevant information from other studies. Geological investigations in the area of the NVR profile showed, that the Arava Fault can partly be recognized in the field by small scarps in the Neogene sediments, small pressure ridges or rhomb-shaped grabens. A typical fault zone architecture with a fault gauge, fault-related damage zone, and undeformed host rock, that has been reported from other large fault zones, could not be found. Therefore, as a complementary part to the NVR experiment, which was designed to resolve deeper crustal structures, ASTER (Advanced Spacebourne Thermal Emission and Reflection Radiometer) satellite images were used to analyze surface deformation and determine neotectonic activity.
Fault planes of large earthquakes incorporate inhomogeneous structures. This can be observed in teleseismic studies through the spatial distribution of slip and seismic moment release caused by the mainshock. Both parameters are often concentrated on patches on the fault plane with much higher values for slip and moment release than their adjacent areas. These patches are called asperities which obviously have a strong influence on the mainshock rupture propagation. Condition and properties of structures in the fault plane area, which are responsible for the evolution of such asperities or their significance on damage distributions of future earthquakes, are still not well understood and subject to recent geo-scientific studies. In the presented thesis asperity structures are identified on the fault plane of the Mw=8.0 Antofagasta earthquake in northern Chile which occurred on 30th of July, 1995. It was a thrust-type event in the seismogenic zone between the subducting pacific Nazca plate and the overriding South American plate. In cooperation of the German Task Force for Earthquakes and the CINCA'95 project a network of up to 44 seismic stations was set up to record the aftershock sequence. The seaward extension of the network with 9 OBH stations increased significantly the precision of hypocenter determinations. They were distributed mainly on the fault plane itself around the city of Antofagasta and Mejillones Peninsula. The asperity structures were recognized here by the spatial variations of local seismological parameters; at first by the spatial distribution of the seismic b-value on the fault plane, derived from the magnitude-frequency relation of Gutenberg-Richter. The correlation of this b-value map with other parameters like the mainshock source time function, the gravity isostatic residual anomalies, the aftershock radiated seismic energy distribution and the vp/vs ratios from a local earthquake tomograhpy study revealed some ideas about the composition and asperity generating processes. The investigation of 295 aftershock focal mechanism solutions supported the resulting fault plane structure and proposed a 3D similar stress state in the area of the Antofagasta fault plane.
The Dead Sea Transform (DST) is a prominent shear zone in the Middle East. It separates the Arabian plate from the Sinai microplate and stretches from the Red Sea rift in the south via the Dead Sea to the Taurus-Zagros collision zone in the north. Formed in the Miocene about 17 Ma ago and related to the breakup of the Afro-Arabian continent, the DST accommodates the left-lateral movement between the two plates. The study area is located in the Arava Valley between the Dead Sea and the Red Sea, centered across the Arava Fault (AF), which constitutes the major branch of the transform in this region. A set of seismic experiments comprising controlled sources, linear profiles across the fault, and specifically designed receiver arrays reveals the subsurface structure in the vicinity of the AF and of the fault zone itself down to about 3-4 km depth. A tomographically determined seismic P velocity model shows a pronounced velocity contrast near the fault with lower velocities on the western side than east of it. Additionally, S waves from local earthquakes provide an average P-to-S velocity ratio in the study area, and there are indications for a variations across the fault. High-resolution tomographic velocity sections and seismic reflection profiles confirm the surface trace of the AF, and observed features correlate well with fault-related geological observations. Coincident electrical resistivity sections from magnetotelluric measurements across the AF show a conductive layer west of the fault, resistive regions east of it, and a marked contrast near the trace of the AF, which seems to act as an impermeable barrier for fluid flow. The correlation of seismic velocities and electrical resistivities lead to a characterisation of subsurface lithologies from their physical properties. Whereas the western side of the fault is characterised by a layered structure, the eastern side is rather uniform. The vertical boundary between the western and the eastern units seems to be offset to the east of the AF surface trace. A modelling of fault-zone reflected waves indicates that the boundary between low and high velocities is possibly rather sharp but exhibits a rough surface on the length scale a few hundreds of metres. This gives rise to scattering of seismic waves at this boundary. The imaging (migration) method used is based on array beamforming and coherency analysis of P-to-P scattered seismic phases. Careful assessment of the resolution ensures reliable imaging results. The western low velocities correspond to the young sedimentary fill in the Arava Valley, and the high velocities in the east reflect mainly Precambrian igneous rocks. A 7 km long subvertical scattering zone reflector is offset about 1 km east of the AF surface trace and can be imaged from 1 km to about 4 km depth. The reflector marks the boundary between two lithological blocks juxtaposed most probably by displacement along the DST. This interpretation as a lithological boundary is supported by the combined seismic and magnetotelluric analysis. The boundary may be a strand of the AF, which is offset from the current, recently active surface trace. The total slip of the DST may be distributed spatially and in time over these two strands and possibly other faults in the area.
This thesis work describes a new experimental method for the determination of Mode II (shear) fracture toughness, KIIC of rock and compares the outcome to results from Mode I (tensile) fracture toughness, KIC, testing using the International Society of Rock Mechanics Chevron-Bend method.Critical Mode I fracture growth at ambient conditions was studied by carrying out a series of experiments on a sandstone at different loading rates. The mechanical and microstructural data show that time- and loading rate dependent crack growth occurs in the test material at constant energy requirement.The newly developed set-up for determination of the Mode II fracture toughness is called the Punch-Through Shear test. Notches were drilled to the end surfaces of core samples. An axial load punches down the central cylinder introducing a shear load in the remaining rock bridge. To the mantle of the cores a confining pressure may be applied. The application of confining pressure favours the growth of Mode II fractures as large pressures suppress the growth of tensile cracks.Variation of geometrical parameters leads to an optimisation of the PTS- geometry. Increase of normal load on the shear zone increases KIIC bi-linear. High slope is observed at low confining pressures; at pressures above 30 MPa low slope increase is evident. The maximum confining pressure applied is 70 MPa. The evolution of fracturing and its change with confining pressure is described.The existence of Mode II fracture in rock is a matter of debate in the literature. Comparison of the results from Mode I and Mode II testing, mainly regarding the resulting fracture pattern, and correlation analysis of KIC and KIIC to physico-mechanical parameters emphasised the differences between the response of rock to Mode I and Mode II loading. On the microscale, neither the fractures resulting from Mode I the Mode II loading are pure mode fractures. On macroscopic scale, Mode I and Mode II do exist.
The India-Eurasia continental collision zone provides a spectacular example of active mountain building and climatic forcing. In order to quantify the critically important process of mass removal, I analyzed spatial and temporal precipitation patterns of the oscillating monsoon system and their geomorphic imprints. I processed passive microwave satellite data to derive high-resolution rainfall estimates for the last decade and identified an abnormal monsoon year in 2002. During this year, precipitation migrated far into the Sutlej Valley in the northwestern part of the Himalaya and reached regions behind orographic barriers that are normally arid. There, sediment flux, mean basin denudation rates, and channel-forming processes such as erosion by debris-flows increased significantly. Similarly, during the late Pleistocene and early Holocene, solar forcing increased the strength of the Indian summer monsoon for several millennia and presumably lead to analogous precipitation distribution as were observed during 2002. However, the persistent humid conditions in the steep, high-elevation parts of the Sutlej River resulted in deep-seated landsliding. Landslides were exceptionally large, mainly due to two processes that I infer for this time: At the onset of the intensified monsoon at 9.7 ka BP heavy rainfall and high river discharge removed material stored along the river, and lowered the baselevel. Second, enhanced discharge, sediment flux, and increased pore-water pressures along the hillslopes eventually lead to exceptionally large landslides that have not been observed in other periods. The excess sediments that were removed from the upstream parts of the Sutlej Valley were rapidly deposited in the low-gradient sectors of the lower Sutlej River. Timing of downcutting correlates with centennial-long weaker monsoon periods that were characterized by lower rainfall. I explain this relationship by taking sediment flux and rainfall dynamics into account: High sediment flux derived from the upstream parts of the Sutlej River during strong monsoon phases prevents fluvial incision due to oversaturation the fluvial sediment-transport capacity. In contrast, weaker monsoons result in a lower sediment flux that allows incision in the low-elevation parts of the Sutlej River.
Subduction zones are regions of intense earthquake activity up to great depth. Sources are located inside the subducting lithosphere and, as a consequence, seismic radiation from subduction zone earthquakes is strongly affected by the interior slab structure. The wave field of these intraslab events observed in the forearc region is profoundly influenced by a seismically slow layer atop the slab surface. This several kilometer thick low-velocity channel (wave guide) causes the entrapment of seismic energy producing strong guided wave phases that appear in P onsets in certain regions of the forearc. Observations at the Chile-Peru subduction zone presented here, as well as observations at several other circum-pacific subduction zones show such signals. Guided wave analysis contributes details of immense value regarding the processes near the slab surface, such as layering of subducted lithosphere, source locations of intraslab seismicity and most of all, range and manner of mineralogical phase transitions. Seismological data stem from intermediate depth events (depth range 70 km - 300 km) recorded in northern Chile near 21 Grad S during the collaborative research initiative " Deformation Processes in the Andes" (SFB 267). A subset of stations - all located within a slab-parallel transect close to 69 Grad W - show low-frequency first arrivals (2 Hz), sometimes followed by a second high-frequency phase. We employ 2-dimensional finite-difference simulations of complete P-SV wave propagation to explore the parameter space of subduction zone wave guides and explain the observations. Key processes underlying the guided wave propagation are studied: Two distinct mechanisms of decoupling of trapped energy from the wave guide are analyzed - a prerequisite to observe the phases at stations located at large distances from the wave guide (up to 100 km). Variations of guided wave effects perpendicular to the strike of the subduction zone are investigated, such as the influence of phases traveling in the fast slab. Further, the merits and limits of guided wave analysis are assessed. Frequency spectra of the guided wave onsets prove to be a robust quantity that captures guided wave characteristics at subduction zones including higher mode excitation. They facilitate the inference of wave guide structure and source positioning: The peak frequency of the guided wave fundamental mode is associated with a certain combination of layer width and velocity contrast. The excitation strength of the guided wave fundamental mode and higher modes is associated with source position and orientation relative to the low-velocity layer. The guided wave signals at the Chile-Peru subduction zone are caused by energy that leaks from the subduction zone wave guide. On the one hand, the bend shape of the slab allows for leakage at a depth of 100 km. On the other, equalization of velocities between the wave guide and the host rocks causes further energy leakage at the contact zone between continental and oceanic crust (70 km depth). Guided waves bearing information on deep slab structure can therefore be recorded at specific regions in the forearc. These regions are determined based on slab geometry, and their locations coincide with the observations. A number of strong constraints on the structure of the Chile-Peru slab are inferred: The deep wave guide for intraslab events is formed by a layer of 2 km average width that remains seismically slow (7 percent velocity reduction compared to surrounding mantle). This low-velocity layer at the top of the Chile-Peru slab is imaged from a depth of 100 km down to at least 160 km. Intermediate depth events causing the observed phases are located inside the layer or directly beneath it in the slab mantle. The layer is interpreted as partially eclogized lower oceanic crust persisting to depth beyond the volcanic arc.
Diagenetic studies of carbonate rocks focused for a long time on photozoan carbonate assemblages deposited in tropical climates. The results of these investigations were taken as models for the diagenetic evolution of many fossil carbonates. Only in recent years the importance of heterozoan carbonates, generally formed out of the tropics or in deeper waters, was realized. Diagenetic studies focusing on this kind of rocks are still scarce, but indicate that the diagenetic evolution of these rocks might be a better model for many fossil carbonate settings ("calcite-sea" carbonates) than the photozoan model used before. This study deals with the determination of the diagenetic pathways and environments in such shallow-water heterozoan carbonate assemblages. Special emphasis is put on the identification of early, near-seafloor diagenetic processes and on the evaluation of the amount of constructive diagenesis in form of cementation in this diagenetic environment. As study area the Central Mediterranean, the Maltese Islands and Sicily, was chosen. Here two sections were logged in Olio-Miocene shallow-water carbonates consisting of different kinds of heterozoan assemblages. The study area is very suitable for the investigation of constructive early diagenetic processes, as the rocks were never deeply buried and burial diagenetic pressure solution and cementation as cause of lithification could be ruled out. Nevertheless, the carbonate rocks are well lithified and form steep cliffs, implying cementation/lithification in another, shallower diagenetic environment. To determine the diagenetic pathways and environments, detailed transmitted light and cathodoluminescence petrography was carried out on thin sections. Furthermore the stable isotope (δ<sup>18O and δ<sup>13C) composition of the bulk rock, single biota and single cement phases was determined, as well as the major and trace element composition of the single cement phases. Petrographically three (Sicily) to four (Maltese Islands) cementation phases, two phases of fabric selective and one of non-fabric selective dissolution, one phase of neomorphism and one of chemical compaction could be distinguished. The stable isotope measurements of the single cement phases pointed to cement precipitation from marine, marine-derived and meteoric waters. The trace element analysis indicated precipitation under reducing conditions, (A) in an open system with low rock-water interaction on the Maltese Islands and (B) in a closed system with high rock-water interaction on Sicily. For the closed systems case, aragonite as cement source could be concluded because its chemical composition was preserved in the newly formed cements. By integrating these results, diagenetic pathways and environments for the investigated locations were established, and the cement source(s) in the different environments were determined. The diagenetic evolution started in the marine environment with the precipitation of fibrous/fibrous-bladed and epitaxial cement I. These cements formed as High Mg Calcite (HMC) directly out of marine waters. The paleoenvironmentally shallowest part of the section on the Maltese Islands was also exposed to meteoric diagenetic fluids. This meteoric influence lead to the dissolution of aragonitic and HMC skeletons, which sourced the cementation by Low Mg Calcitic (LMC) epitaxial cement II in this part of the Maltese section. Entering the burial-marine environment the main part of dissolution, cementation and neomorphism started to take place. The elevated CO2 content in this environment, caused by the decay of organic matter, lead to the dissolution of aragonitic skeletons, which sourced the cementation by LMC epitaxial cement II, bladed and blocky cements. The earlier precipitated HMC cement phases were either partly dissolved (epitaxial cement I) or neomorphosed to LMC (fibrous/fibrous-bladed and epitaxial cement I). In the burial environment weak chemical compaction took place without sourcing significant amounts of cementation. In a last phase the rocks entered the meteoric realm by uplift, which caused non-fabric selective dissolution. This study shows that early diagenetic processes, taking place at or just below the sediment-water-interface, are very important for the mineralogical stabilization of heterozoan carbonate strata. The main amount of constructive diagenesis in form of cementation takes place in this environment, sourced by dissolution of aragonitic and, to a lesser degree, of HMC skeletons. The results of this study imply that the primary amount of aragonitic skeletons in heterozoan carbonate sediments must be carefully assessed, as they are the main early diagenetic cement source. In fossil heterozoan carbonate rocks, aragonitic skeletons might be the cement source even when no relict structures like micritic envelops or biomolds are preserved. In general, the diagenetic evolution of heterozoan carbonate rocks is a good model for the diagenesis of "calcite-sea" time carbonate rocks.
The role of feedback between erosional unloading and tectonics controlling the development of the Himalaya is a matter of current debate. The distribution of precipitation is thought to control surface erosion, which in turn results in tectonic exhumation as an isostatic compensation process. Alternatively, subsurface structures can have significant influence in the evolution of this actively growing orogen. Along the southern Himalayan front new 40Ar/39Ar white mica and apatite fission track (AFT) thermochronologic data provide the opportunity to determine the history of rock-uplift and exhumation paths along an approximately 120-km-wide NE-SW transect spanning the greater Sutlej region of the northwest Himalaya, India. 40Ar/39Ar data indicate, consistent with earlier studies that first the High Himalayan Crystalline, and subsequently the Lesser Himalayan Crystalline nappes were exhumed rapidly during Miocene time, while the deformation front propagated to the south. In contrast, new AFT data delineate synchronous exhumation of an elliptically shaped, NE-SW-oriented ~80 x 40 km region spanning both crystalline nappes during Pliocene-Quaternary time. The AFT ages correlate with elevation, but show within the resolution of the method no spatial relationship to preexisting major tectonic structures, such as the Main Central Thrust or the Southern Tibetan Fault System. Assuming constant exhumation rates and geothermal gradient, the rocks of two age vs. elevation transects were exhumed at ~1.4 ±0.2 and ~1.1 ±0.4 mm/a with an average cooling rate of ~50-60 °C/Ma during Pliocene-Quaternary time. The locus of pronounced exhumation defined by the AFT data coincides with a region of enhanced precipitation, high discharge, and sediment flux rates under present conditions. We therefore hypothesize that the distribution of AFT cooling ages might reflect the efficiency of surface processes and fluvial erosion, and thus demonstrate the influence of erosion in localizing rock-uplift and exhumation along southern Himalayan front, rather than encompassing the entire orogen.Despite a possible feedback between erosion and exhumation along the southern Himalayan front, we observe tectonically driven, crustal exhumation within the arid region behind the orographic barrier of the High Himalaya, which might be related to and driven by internal plateau forces. Several metamorphic-igneous gneiss dome complexes have been exhumed between the High Himalaya to the south and Indus-Tsangpo suture zone to the north since the onset of Indian-Eurasian collision ~50 Ma ago. Although the overall tectonic setting is characterized by convergence the exhumation of these domes is accommodated by extensional fault systems.Along the Indian-Tibetan border the poorly described Leo Pargil metamorphic-igneous gneiss dome (31-34°N/77-78°E) is located within the Tethyan Himalaya. New field mapping, structural, and geochronologic data document that the western flank of the Leo Pargil dome was formed by extension along temporally linked normal fault systems. Motion on a major detachment system, referred to as the Leo Pargil detachment zone (LPDZ) has led to the juxtaposition of low-grade metamorphic, sedimentary rocks in the hanging wall and high-grade metamorphic gneisses in the footwall. However, the distribution of new 40Ar/39Ar white mica data indicate a regional cooling event during middle Miocene time. New apatite fission track (AFT) data demonstrate that subsequently more of the footwall was extruded along the LPDZ in a brittle stage between 10 and 2 Ma with a minimum displacement of ~9 km. Additionally, AFT-data indicate a regional accelerated cooling and exhumation episode starting at ~4 Ma. Thus, tectonic processes can affect the entire orogenic system, while potential feedbacks between erosion and tectonics appear to be limited to the windward sides of an orogenic systems.
One of the most difficult issues when dealing with optical water remote-sensing is its acceptance as a useful application for environmental research. This problem is, on the one hand, concerned with the optical complexity and variability of the investigated natural media, and therefore the question arises as to the plausibility of the parameters derived from remote-sensing techniques. Detailed knowledge about the regional bio- and chemico-optical properties is required for such studies, however such information is seldom available for the sites of interest. On the other hand, the primary advantage of remote-sensing information, which is the provision of a spatial overview, may not be exploited fully by the disciplines that would benefit most from such information. It is often seen in a variety of disciplines that scientists have been primarily trained to look at discrete data sets, and therefore have no experience of incorporating information dealing with spatial heterogeneity. In this thesis, the opportunity was made available to assess the potential of Ocean Colour data to provide spatial and seasonal information about the surface waters of Lake Baikal (Siberia). While discrete limnological field data is available, the spatial extension of Lake Baikal is enormous (ca. 600 km), while the field data are limited to selected sites and expedition time windows. Therefore, this remote-sensing investigation aimed to support a multi-disciplinary limnological investigation within the framework of the paleoclimate EU-project ‘High Resolution CONTINENTal Paleoclimate Record in Lake Baikal, Siberia (CONTINENT)’ using spatial and seasonal information from the SeaWiFS satellite (NASA). From this, the SeaWiFS study evolved to become the first efficient bio-optical satellite study of Lake Baikal. During the course of three years, field work including spectral field measurements and water sampling, was carried out at Lake Baikal in Southern Siberia, and at the Mecklenburg and Brandenburg lake districts in Germany. The first step in processing the SeaWiFS satellite data involved adapting the SeaDAS (NASA) atmospheric-correction processing to match as close as possible the specific conditions of Lake Baikal. Next, various Chl-a algorithms were tested on the atmospherically-corrected optimized SeaWiFS data set (years 2001 to 2002), comparing the CONTINENT pigment ground-truth data with the Chl-a concentrations derived from the satellite data. This showed the high performance of the global Chl-a products OC2 and OC4 for the oligotrophic, transparent waters (bio-optical Case 1) of Lake Baikal. However, considerable Chl-a overestimation prevailed in bio-optical Case 2 areas for the case of discharge events. High-organic terrigenous input into Lake Baikal could be traced and information extracted using the SeaWiFS spectral data. Suspended Particulate Matter (SPM) was quantified by the regression of the SeaDAS attenuation coefficient as the optical parameter with SPM field data. Finally, the Chl-a and terrigenous input maps derived from the remote sensing data were used to assist with analyzing the relationships between the various discrete data obtained during the CONTINENT field work. Hence, plausible spatial and seasonal information describing autochthonous and allochthonous material in Lake Baikal could be provided by satellite data.Lake Baikal, with its bio-optical complexity and its different areas of Case 1 and Case 2 waters, is a very interesting case study for Ocean Colour analyses. Proposals for future Ocean Colour studies of Lake Baikal are discussed, including which bio-optical parameters for analytical models still need to be clarified by field investigations.
About 24 % of the land surface in the northern hemisphere are underlayed by permafrost in various states. Permafrost aggradation occurs under special environmental conditions with overall low annual precipitation rates and very low mean annual temperatures. Because the general permafrost occurrence is mainly driven by large-scale climatic conditions, the distribution of permafrost deposits can be considered as an important climate indicator. The region with the most extensive continuous permafrost is Siberia. In northeast Siberia, the ice- and organic-rich permafrost deposits of the Ice Complex are widely distributed. These deposits consist mostly of silty to fine-grained sandy sediments that were accumulated during the Late Pleistocene in an extensive plain on the then subaerial Laptev Sea shelf. One important precondition for the Ice Complex sedimentation was, that the Laptev Sea shelf was not glaciated during the Late Pleistocene, resulting in a mostly continuous accumulation of permafrost sediments for at least this period. This shelf landscape became inundated and eroded in large parts by the Holocene marine transgression after the Last Glacial Maximum. Remnants of this landscape are preserved only in the present day coastal areas. Because the Ice Complex deposits contain a wide variety of palaeo-environmental proxies, it is an excellent palaeo-climate archive for the Late Quaternary in the region. Furthermore, the ice-rich Ice Complex deposits are sensible to climatic change, i.e. climate warming. Because of the large-scale climatic changes at the transition from the Pleistocene to the Holocene, the Ice Complex was subject to extensive thermokarst processes since the Early Holocene. Permafrost deposits are not only an environmental indicator, but also an important climate factor. Tundra wetlands, which have developed in environments with aggrading permafrost, are considered a net sink for carbon, as organic matter is stored in peat or is syn-sedimentary frozen with permafrost aggradation. Contrary, the Holocene thermokarst development resulted in permafrost degradation and thus the release of formerly stored organic carbon. Modern tundra wetlands are also considered an important source for the climate-driving gas methane, originating mainly from microbial activity in the seasonal active layer. Most scenarios for future global climate development predict a strong warming trend especially in the Arctic. Consequently, for the understanding of how permafrost deposits will react and contribute to such scenarios, it is necessary to investigate and evaluate ice-rich permafrost deposits like the widespread Ice Complex as climate indicator and climate factor during the Late Quaternary. Such investigations are a pre-condition for the precise modelling of future developments in permafrost distribution and the influence of permafrost degradation on global climate. The focus of this work, which was conducted within the frame of the multi-disciplinary joint German-Russian research projects "Laptev Sea 2000" (1998-2002) and "Dynamics of Permafrost" (2003-2005), was twofold. First, the possibilities of using remote sensing and terrain modelling techniques for the observation of periglacial landscapes in Northeast Siberia in their present state was evaluated and applied to key sites in the Laptev Sea coastal lowlands. The key sites were situated in the eastern Laptev Sea (Bykovsky Peninsula and Khorogor Valley) and the western Laptev Sea (Cape Mamontovy Klyk region). For this task, techniques using CORONA satellite imagery, Landsat-7 satellite imagery, and digital elevation models were developed for the mapping of periglacial structures, which are especially indicative of permafrost degradation. The major goals were to quantify the extent of permafrost degradation structures and their distribution in the investigated key areas, and to establish techniques, which can be used also for the investigation of other regions with thermokarst occurrence. Geographical information systems were employed for the mapping, the spatial analysis, and the enhancement of classification results by rule-based stratification. The results from the key sites show, that thermokarst, and related processes and structures, completely re-shaped the former accumulation plain to a strongly degraded landscape, which is characterised by extensive deep depressions and erosional remnants of the Late Pleistocene surface. As a results of this rapid process, which in large parts happened within a short period during the Early Holocene, the hydrological and sedimentological regime was completely changed on a large scale. These events resulted also in a release of large amounts of organic carbon. Thermokarst is now the major component in the modern periglacial landscapes in terms of spatial extent, but also in its influence on hydrology, sedimentation and the development of vegetation assemblages. Second, the possibilities of using remote sensing and terrain modelling as a supplementary tool for palaeo-environmental reconstructions in the investigated regions were explored. For this task additionally a comprehensive cryolithological field database was developed for the Bykovsky Peninsula and the Khorogor Valley, which contains previously published data from boreholes, outcrops sections, subsurface samples, and subsurface samples, as well as additional own field data. The period covered by this database is mainly the Late Pleistocene and the Holocene, but also the basal deposits of the sedimentary sequence, interpreted as Pliocene to Early Pleistocene, are contained. Remote sensing was applied for the observation of periglacial strucures, which then were successfully related to distinct landscape development stages or time intervals in the investigation area. Terrain modelling was used for providing a general context of the landscape development. Finally, a scheme was developed describing mainly the Late Quaternary landscape evolution in this area. A major finding was the possibility of connecting periglacial surface structures to distinct landscape development stages, and thus use them as additional palaeo-environmental indicator together with other proxies for area-related palaeo-environmental reconstructions. In the landscape evolution scheme, i.e. of the genesis of the Late Pleistocene Ice Complex and the Holocene thermokarst development, some new aspects are presented in terms of sediment source and general sedimentation conditions. This findings apply also for other sites in the Laptev Sea region.
The intracontinental endorheic Aral Sea, remote from oceanic influences, represents an excellent sedimentary archive in Central Asia that can be used for high-resolution palaeoclimate studies. We performed palynological, microfacies and geochemical analyses on sediment cores retrieved from Chernyshov Bay, in the NW part of the modern Large Aral Sea. The most complete sedimentary sequence, whose total length is 11 m, covers approximately the past 2000 years of the late Holocene. High-resolution palynological analyses, conducted on both dinoflagellate cysts assemblages and pollen grains, evidenced prominent environmental change in the Aral Sea and in the catchment area. The diversity and the distribution of dinoflagellate cysts within the assemblages characterized the sequence of salinity and lake-level changes during the past 2000 years. Due to the strong dependence of the Aral Sea hydrology to inputs from its tributaries, the lake levels are ultimately linked to fluctuations in meltwater discharges during spring. As the amplitude of glacial meltwater inputs is largely controlled by temperature variations in the Tien Shan and Pamir Mountains during the melting season, salinity and lake-level changes of the Aral Sea reflect temperature fluctuations in the high catchment area during the past 2000 years. Dinoflagellate cyst assemblages document lake lowstands and hypersaline conditions during ca. 0–425 AD, 920–1230 AD, 1500 AD, 1600–1650 AD, 1800 AD and since the 1960s, whereas oligosaline conditions and higher lake levels prevailed during the intervening periods. Besides, reworked dinoflagellate cysts from Palaeogene and Neogene deposits happened to be a valuable proxy for extreme sheet-wash events, when precipitation is enhanced over the Aral Sea Basin as during 1230–1450 AD. We propose that the recorded environmental changes are related primarily to climate, but may have been possibly amplified during extreme conditions by human-controlled irrigation activities or military conflicts. Additionally, salinity levels and variations in solar activity show striking similarities over the past millennium, as during 1000–1300 AD, 1450–1550 and 1600–1700 AD when low lake levels match well with an increase in solar activity thus suggesting that an increase in the net radiative forcing reinforced past Aral Sea’s regressions. On the other hand, we used pollen analyses to quantify changes in moisture conditions in the Aral Sea Basin. High-resolution reconstruction of precipitation (mean annual) and temperature (mean annual, coldest versus warmest month) parameters are performed using the “probability mutual climatic spheres” method, providing the sequence of climate change for the past 2000 years in western Central Asia. Cold and arid conditions prevailed during ca. 0–400 AD, 900–1150 AD and 1500–1650 AD with the extension of xeric vegetation dominated by steppe elements. Conversely, warmer and less arid conditions occurred during ca. 400–900 AD and 1150–1450 AD, where steppe vegetation was enriched in plants requiring moister conditions. Change in the precipitation pattern over the Aral Sea Basin is shown to be predominantly controlled by the Eastern Mediterranean (EM) cyclonic system, which provides humidity to the Middle East and western Central Asia during winter and early spring. As the EM is significantly regulated by pressure modulations of the North Atlantic Oscillation (NAO) when the system is in a negative phase, a relationship between humidity over western Central Asia and the NAO is proposed. Besides, laminated sediments record shifts in sedimentary processes during the late Holocene that reflect pronounced changes in taphonomic dynamics. In Central Asia, the frequency of dust storms occurring during spring when the continent is heating up is mostly controlled by the intensity and the position of the Siberian High (SH) Pressure System. Using titanium (Ti) content in laminated sediments as a proxy for aeolian detrital inputs, changes in wind dynamics over Central Asia is documented for the past 1500 years, offering the longest reconstruction of SH variability to date. Based on high Ti content, stronger wind dynamics are reported from 450–700 AD, 1210–1265 AD, 1350–1750 AD and 1800–1975 AD, reporting a stronger SH during spring. In contrast, lower Ti content from 1750–1800 AD and 1980–1985 AD reflect a diminished influence of the SH and a reduced atmospheric circulation. During 1180–1210 AD and 1265–1310 AD, considerably weakened atmospheric circulation is evidenced. As a whole, though climate dynamics controlled environmental changes and ultimately modulated changes in the western Central Asia’s climate system, it is likely that changes in solar activity also had an impact by influencing to some extent the Aral Sea’s hydrology balance and also regional temperature patterns in the past. <hr> The appendix of the thesis is provided via the HTML document as ZIP download.
Earthquakes form by sudden brittle failure of rock mostly as shear ruptures along a rupture plane. Beside this, mechanisms other than pure shearing have been observed for some earthquakes mainly in volcanic areas. Possible explanations include complex rupture geometries and tensile earthquakes. Tensile earthquakes occur by opening or closure of cracks during rupturing. They are likely to be often connected with fluids that cause pressure changes in the pore space of rocks leading to earthquake triggering. Tensile components have been reported for swarm earthquakes in West Bohemia in 2000. The aim and subject of this work is an assessment and the accurate determination of such tensile components for earthquakes in anisotropic media. Currently used standard techniques for the retrieval of earthquake source mechanisms assume isotropic rock properties. By means of moment tensors, equivalent forces acting at the source are used to explain the radiated wavefield. Conversely, seismic anisotropy, i.e. directional dependence of elastic properties, has been observed in the earth's crust and mantle such as in West Bohemia. In comparison to isotropy, anisotropy causes modifications in wave amplitudes and shear-wave splitting. In this work, effects of seismic anisotropy on true or apparent tensile source components of earthquakes are investigated. In addition, earthquake source parameters are determined considering anisotropy. It is shown that moment tensors and radiation patterns due to shear sources in anisotropic media may be similar to those of tensile sources in isotropic media. In contrast, similarities between tensile earthquakes in anisotropic rocks and shear sources in isotropic media may exist. As a consequence, the interpretation of tensile source components is ambiguous. The effects that are due to anisotropy depend on the orientation of the earthquake source and the degree of anisotropy. The moment of an earthquake is also influenced by anisotropy. The orientation of fault planes can be reliably determined even if isotropy instead of anisotropy is assumed and if the spectra of the compressional waves are used. Greater difficulties may arise when the spectra of split shear waves are additionally included. Retrieved moment tensors show systematic artefacts. Observed tensile source components determined for events in West Bohemia in 1997 can only partly be attributed to the effects of moderate anisotropy. Furthermore, moment tensors determined earlier for earthquakes induced at the German Continental Deep Drilling Program (KTB), Bavaria, were reinterpreted under assumptions of anisotropic rock properties near the borehole. The events can be consistently identified as shear sources, although their moment tensors comprise tensile components that are considered to be apparent. These results emphasise the necessity to consider anisotropy to uniquely determine tensile source parameters. Therefore, a new inversion algorithm has been developed, tested, and successfully applied to 112 earthquakes that occurred during the most recent intense swarm episode in West Bohemia in 2000 at the German-Czech border. Their source mechanisms have been retrieved using isotropic and anisotropic velocity models. Determined local magnitudes are in the range between 1.6 and 3.2. Fault-plane solutions are similar to each other and characterised by left-lateral faulting on steeply dipping, roughly North-South oriented rupture planes. Their dip angles decrease above a depth of about 8.4km. Tensile source components indicating positive volume changes are found for more than 60% of the considered earthquakes. Their size depends on source time and location. They are significant at the beginning of the swarm and at depths below 8.4km but they decrease in importance later in the course of the swarm. Determined principle stress axes include P axes striking Northeast and Taxes striking Southeast. They resemble those found earlier in Central Europe. However, depth-dependence in plunge is observed. Plunge angles of the P axes decrease gradually from 50° towards shallow angles with increasing depth. In contrast, the plunge angles of the T axes change rapidly from about 8° above a depth of 8.4km to 21° below this depth. By this thesis, spatial and temporal variations in tensile source components and stress conditions have been reported for the first time for swarm earthquakes in West Bohemia in 2000. They also persist, when anisotropy is assumed and can be explained by intrusion of fluids into the opened cracks during tensile faulting.
The styles of deformation of the fore-arc wedges along the Chilean convergent margin are observed to vary significantly, despite similar plate kinematic conditions. Here, I focus on the analysis of fore-arc deformation on two regions along the Chilean convergent margin at 20°-24°S and 37°-42°S. Although both regions are subjected to the oblique subduction of the oceanic Nazca plate and backstopped by the Andes mountain chain; they display different patterns of deformation. The northern Chilean study area (20° - 24°S) is characterized by an exceptionally thick crust of about 60 km beneath the Altiplano – Puna plateau, lack of an accretionary wedge in the fore-arc due to hyperarid climate, and consequently a sediment starved trench. Two major margin parallel strike slip faults are observed in this area, the Atacama Fault Zone (AFZ) and the Precordilleran Fault System (PFS). Both strike-slip faults do not exhibit significant recent displacement. The southern study area (37° - 42°S), compared to the northern study area, is characterized by lower topography, high precipitation rates (~2000 mm/yr), and a younger subducted oceanic plate. An active strike-slip fault, the Liquiñe-Ofqui-Fault-Zone (LOFZ), shows ~1 cm/yr recent dextral movement and shapes the surface of this area. Thus, the southern Chilean study area exhibits localized strike-slip motion. Within this area the largest earthquake ever recorded, the 1960 Valdivia earthquake, occurred with a moment magnitude of MW=9.5. I have constructed 2D thermal models and 3D mechanical models for both Chilean study areas to study processes related to active subduction. The applied numerical method is the finite element technique by means of the commercial software package ABAQUS. The thermal models are focused on the thermal conditions along the plate interface. The thermal structure along the plate interface reveals the limits of coupling but also the type of transition from coupled to uncoupled and vice versa. The model results show that shear heating at the plate interface is an important mechanism that should be taken into account. The models also show that the thermal condition at the downdip limit of the coupling zone leads to a sharp decrease of friction along the interface. Due to the different geometries of the two Chilean study areas, such as the slab dip and the thickness of the continental crust, the downdip limit of the southern study area is slightly shallower than that of the northern study area. The results of the 2D thermal models are used to constrain the spatial extent of the coupling zone in the 3D mechanical models. 3D numerical simulations are used to investigate how geometry, rheology and mechanical parameters influence strain partitioning and styles of deformation in the Chilean fore-arc. The general outline of the models is based on the fore-arc geometry and boundary conditions as derived from geophysical and geological field data. I examined the influence of different rheological approaches and varying physical properties of the fore-arc to identify and constrain the parameters controlling the difference in surface deformation between the northern and southern study area. The results of numerical studies demonstrate that a small slab dip, a high coefficient of basal friction, a high obliquity of convergence, and a high Young’s modulus favour localisation of deformation in the fore-arc wedge. This parameter study helped me to constrain preferred models for the two Chilean study areas that fit to first order observations. These preferred models explain the difference in styles of deformation as controlled by the angle of obliquity, the dip of subducting slab, and the strength of wedge material. The difference in styles can be even larger if I apply stronger coupling between plates within the southern area; however, several independent observations indicate opposite tendency showing southward decrease of intensity of coupling. The weaker wedge material of the preferred model for the northern study area is associated with advanced development of the adjacent orogen, the Central Andes. Analysis of world-wide examples of oblique subduction zones supports the conclusion that more mature subduction zones demonstrate less pronounced localization of strike-slip motion.
Mafic magmatism in the Eastern Cordillera and Putumayo Basin, Colombia : causes and consequences
(2007)
The Eastern Cordillera of Colombia is mainly composed of sedimentary rocks deposited since early Mesozoic times. Magmatic rocks are scarce. They are represented only by a few locally restricted occurrences of dykes and sills of mafic composition presumably emplaced in the Cretaceous and of volcanic rocks of Neogene age. This work is focused on the study of the Cretaceous magmatism with the intention to understand the processes causing the genesis of these rocks and their significance in the regional tectonic setting of the Northern Andes. The magmatic rocks cut the Cretaceous sedimentary succession of black shales and marlstones that crop out in both flanks of the Eastern Cordillera. The studied rocks were classified as gabbros (Cáceres, Pacho, Rodrigoque), tonalites (Cáceres, La Corona), diorites and syenodiorites (La Corona), pyroxene-hornblende gabbros (Pacho), and pyroxene-hornblendites (Pajarito). The gabbroic samples are mainly composed of plagioclase, clinopyroxene, and/or green to brown hornblende, whereas the tonalitic rocks are mainly composed of plagioclase and quartz. The samples are highly variable in crystal sizes from fine- to coarse-grained. Accessory minerals such as biotite, titanite and zircon are present. Some samples are characterized by moderate to strong alteration, and show the presence of epidote, actinolite and chlorite. Major and trace element compositions of the rocks as well as the rock-forming minerals show significant differences in the geochemical and petrological characteristics for the different localities, suggesting that this magmatism does not result from a single melting process. The wide compositional spectrum of trace elements in the intrusions is characteristic for different degrees of mantle melting and enrichment of incompatible elements. MORB- and OIB-like compositions suggest at least two different sources of magma with tholeiitic and alkaline affinity, respectively. Evidence of slab-derived fluids can be recognized in the western part of the basin reflected in higher Ba/Nb and Sr/P ratios and also in the Sr radiogenic isotope ratios, which is possible a consequence of metasomatism in the mantle due to processes related to the presence of a previously subducted slab. The trace element patterns evidence an extensional setting in the Cretaceous basin producing a continental rift, with continental crust being stretched until oceanic crust was generated in the last stages of this extension. Electron microprobe analyses (EMPA) of the major elements and synchrotron radiation micro-X-ray fluorescence (μ-SRXRF) analyses of the trace element composition of the early crystallized minerals of the intrusions (clinopyroxenes and amphiboles) reflect the same dual character that has been found in the bulk-rock analyses. Despite the observed alteration of the rocks, the mineral composition shows evidences for an enriched and a relative depleted magma source. Even the normalization of the trace element concentrations of clinopyroxenes and amphiboles to the whole rock nearly follows the pattern predicted by published partition coefficients, suggesting that the alteration did not change the original trace element compositions of the investigated minerals. Sr-Nd-Pb isotope data reveal a large isotopic variation but still suggest an initial origin of the magmas in the mantle. Samples have moderate to highly radiogenic compositions of 143Nd/144Nd and high 87Sr/86Sr ratios and follow a trend towards enriched mantle compositions, like the local South American Paleozoic crust. The melts experienced variable degrees of contamination by sediments, crust, and seawater. The age corrected Pb isotope ratios show two separated groups of samples. This suggests that the chemical composition of the mantle below the Northern Andes has been modified by the interaction with other components resulting in a heterogeneous combination of materials of diverse origins. Although previous K/Ar age dating have shown that the magmatism took place in the Cretaceous, the high error of the analyses and the altered nature of the investigated minerals did preclude reliable interpretations. In the present work 40Ar/39Ar dating was carried out. The results show a prolonged history of magmatism during the Cretaceous over more than 60 Ma, from ~136 to ~74 Ma (Hauterivian to Campanian). Pre-Cretaceous rifting phases occurred in the Triassic-Jurassic for the western part of the basin and in the Paleozoic for the eastern part. Those previous rifting phases are decisive mechanisms controlling the localization and composition of the Cretaceous magmatism. Therefore, it is the structural position and not the age of the intrusions which preconditions the kind of magmatism and the degree of melting. The divergences on ages are the consequence of the segmentation of the basin in several sub-basins which stretching, thermal evolution and subsidence rate evolved independently. The first hypothesis formulated at the beginning of this investigation was that the Cretaceous gabbroic intrusions identified in northern Ecuador could be correlated with the intrusions described in the Eastern Cordillera. The mafic occurrences should mark the location of the most subsiding places of the large Cretaceous basin in northern South America. For this reason, the gabbroic intrusions cutting the Cretaceous succession in the Putumayo Basin, southern Colombia, were investigated. The results of the studies were quite unexpected. The petrologic and geochemical character of the magmatic rocks indicates subduction-related magmatism. K/Ar dating of amphibole yields a Late Miocene to Pliocene age (6.1 ± 0.7 Ma) for the igneous event in the basin. Although there is no correlation between this magmatic event and the Cretaceous magmatic event, the data obtained has significant tectonic and economic implications. The emplacement of the Neogene gabbroic rocks coincides with the late Miocene/Pliocene Andean orogenic uplift as well as with a significant pulse of hydrocarbon generation and expulsion.
The Andean orogen is the most outstanding example of mountain building caused by the subduction of oceanic below continental lithosphere. The Andes formed by the subduction of the Nazca and Antarctic oceanic plates under the South American continent over at least ~200 million years. Tectonic and climatic conditions vary markedly along this north-south–oriented plate boundary, which thus represents an ideal natural laboratory to study tectonic and climatic segmentation processes and their possible feedbacks. Most of the seismic energy on Earth is released by earthquakes in subduction zones, like the giant 1960, Mw 9.5 event in south-central Chile. However, the segmentation mechanisms of surface deformation during and between these giant events have remained poorly understood. The Andean margin is a key area to study seismotectonic processes because of its along-strike variability under similar plate kinematic boundary conditions. Active deformation has been widely studied in the central part of the Andes, but the south-central sector of the orogen has gathered less research efforts. This study focuses on tectonics at the Neogene and late Quaternary time scales in the Main Cordillera and coastal forearc of the south-central Andes. For both domains I document the existence of previously unrecognized active faults and present estimates of deformation rates and fault kinematics. Furthermore these data are correlated to address fundamental mountain building processes like strain partitioning and large-scale segmentation. In the Main Cordillera domain and at the Neogene timescale, I integrate structural and stratigraphic field observations with published isotopic ages to propose four main phases of coupled styles of tectonics and distribution of volcanism and magmatism. These phases can be related to the geometry and kinematics of plate convergence. At the late Pleistocene timescale, I integrate field observations with lake seismic and bathymetric profiles from the Lago Laja region, located near the Andean drainage divide. These data reveal Holocene extensional faults, which define the Lago Laja fault system. This fault system has no significant strike-slip component, contrasting with the Liquiñe-Ofqui dextral intra-arc system to the south, where Holocene strike-slip markers are ubiquitous. This contrast in structural style along the arc is coincident with a marked change in along-strike fault geometries in the forearc, across the Arauco Peninsula. Thereon I propose that a net gradient in the degree of partitioning of oblique subduction occurs across the Arauco transition zone. To the north, the margin parallel component of oblique convergence is distributed in a wide zone of diffuse deformation, while to the south it is partitioned along an intra-arc, margin-parallel strike-slip fault zone. In the coastal forearc domain and at the Neogene timescale, I integrate structural and stratigraphic data from field observations, industry reflection-seismic profiles and boreholes to emphasize the influence of climate-driven filling of the trench on the mechanics and kinematics of the margin. I show that forearc basins in the 34-45°S segment record Eocene to early Pliocene extension and subsidence followed by ongoing uplift and contraction since the late Pliocene. I interpret the first stage as caused by tectonic erosion due to high plate convergence rates and reduced trench fill. The subsequent stage, in turn, is related to accretion caused by low convergence rates and the rapid increase in trench fill after the onset of Patagonian glaciations and climate-driven exhumation at ~6-5 Ma. On the late Quaternary timescale, I integrate off-shore seismic profiles with the distribution of deformed marine terraces from Isla Santa María, dated by the radiocarbon method, to show that inverted reverse faulting controls the coastal geomorphology and segmentation of surface deformation. There, a cluster of microearthquakes illuminates one of these reverse faults, which presumingly reaches the plate interface. Furthermore, I use accounts of coseismic uplift during the 1835 M>8 earthquake made by Charles Darwin, to propose that this active reverse fault has been mechanically coupled to the megathrust. This has important implications on the assessment of seismic hazards in this, and other similar regions. These results underscore the need to study plate-boundary deformation processes at various temporal and spatial scales and to integrate geomorphologic, structural, stratigraphic, and geophysical data sets in order to understand the present distribution and causes of tectonic segmentation.
The South Chilean subduction zone between 41° and 43.5°S : seismicity, structure and state of stress
(2008)
While the northern and central part of the South American subduction zone has been intensively studied, the southern part has attracted less attention, which may be due to its difficult accessibility and lower seismic activity. However, the southern part exhibits strong seismic and tsunamogenic potential with the prominent example of the Mw=9.5 May 22, 1960 Valdivia earthquake. In this study data from an amphibious seismic array (Project TIPTEQ) is presented. The network reached from the trench to the active magmatic arc incorporating the Island of Chiloé and the north-south trending Liquiñe-Ofqui fault zone (LOFZ). 364 local events were observed in an 11-month period from November 2004 until October 2005. The observed seismicity allows to constrain for the first time the current state of stress of the subducting plate and magmatic arc, as well as the local seismic velocity structure. The downgoing Benioff zone is readily identifiable as an eastward dipping plane with an inclination of ~30°. Main seismic activity occurred predominantly in a belt parallel to the coast of Chiloé Island in a depth range of 12-30 km, which is presumably related to the plate interface. The down-dip termination of abundant intermediate depth seismicity at approximately 70 km depth seems to be related to the young age (and high temperature) of the oceanic plate. A high-quality subset of events was inverted for a 2-D velocity model. The vp model resolves the sedimentary basins and the downgoing slab. Increased velocities below the longitudinal valley and the eastern part of Chiloé Island suggest the existence of a mantle bulge. Apart from the events in the Benioff Zone, shallow crustal events were observed mainly in different clusters along the magmatic arc. These crustal clusters of seismicity are related to the LOFZ, as well as to the volcanoes Chaitén, Michinmahuida and Corcovado. Seismic activity up to a magnitude of 3.8 Mw reveals the recent activity of the fault zone. Focal mechanisms for the events along the LOFZ were calculated using a moment tensor inversion of amplitude spectra for body waves which mostly yield strike-slip mechanisms indicating a SW-NE striking of sigma_1 for the LOFZ. Focal mechanism stress inversion indicates a strike-slip regime along the arc and a thrust regime in the Benioff zone. The observed deformation - which is also revealed by teleseismic observations - suggests a confirmation for the proposed northward movement of a forearc sliver acting as a detached continental micro-plate.
Paleoenvironmental records provide ample information on the Late Quaternary climatic evolution. Due to the great diversity of continental mid-latitude environments the synthetic picture of the past mid-latitudinal climate changes is, however, far from being complete. Owing to its significant size and landlocked setting the Black Sea constitutes a perfect location to study patterns and mechanisms of climate change along the continental interior of Central and Eastern Europe and Asia Minor. Presently, the southern drainage area of the Black Sea is characterized by a Mediterranean-type climate while the northern drainage is under the influence of Central and Northern European climate. During the Last Glacial a decrease in the global sea level disconnected the Black Sea from the Mediterranean Sea transforming it into a giant closed lake. At that time atmospheric precipitation and related with it river run-off were the most important factors driving sediment supply and water chemistry of the Black ‘Lake’. Therefore studying properties of the Black Sea sediments provides important information on the interactions and development of the Mediterranean and Central and North European climate in the past. One significant outcome of my thesis is an improved chronostraphigraphical framework for the glacial lacustrine unit of the Black Sea sediment cores, which allowed to refine the environmental history of the Black Sea region and enabled a reliable correlation with data from other marine and terrestrial archives. Data gathered along a N-S transect presented on a common time scale revealed coherent changes in the basin and its surrounding. During the glacial, the southward-shifted Polar Front reduced moisture transport to the northern drainage of the Black Sea and let the southern drainage become dominant in freshwater and sediment supply into the basin. Changes in NW Anatolian precipitation reconstructed from the variability of the terrigenous input imply that during the glacial the regional rainfall variability was strongly influenced by Mediterranean sea surface temperatures and decreased in response to the cooling associated with the North Atlantic Heinrich Events H1 and H2. In contrast to regional precipitation changes, the hydrological properties of the Black Sea remained relatively stable under full glacial conditions. First significant modification in the freshwater/sediment sources reconstructed from changes in the sediment composition, lithology, and 18O of ostracods took place at around 16.4 cal ka BP, simultaneous to the early deglacial northward retreat of the oceanic and atmospheric polar fronts. Meltwater pulses, most probably derived from the disintegrating European ice sheets, changed the isotopic composition of the Black Sea and increased the supply from northern sediment sources. While these changes signalized a mitigation of the Northern European and Mediterranean climate, a decisive increase in local temperature was indicated only later at the transition from the Oldest Dryas to the Bølling around 14.6 cal ka BP. At that time the warming of the Black Sea surface initiated massive phytoplankton blooms, which in turn, induced the precipitation of inorganic carbonates. This biologically triggered process significantly changed the water chemistry and was recorded by simultaneous shifts in the elemental composition of ostracod shells and in the isotopic composition of the inorganically-precipitated carbonates. Starting with the B/A warming and continuing through the YD cold interval and the Early Holocene warming, the Black Sea temperature signal corresponds to the precipitation and temperature changes recorded in the wider Mediterranean region. Early Holocene conditions, similar to those of the Bølling/Allerød, were punctured by the marine inflow from the Mediterranean at ~ 9.3 cal ka BP, which terminated the lacustrine phase of the Black Sea and had a substantial impact on the chemical and physical properties of its water.
It has always been enigmatic which processes control the accretion of the North American terranes towards the Pacific plate and the landward migration of the San Andreas plate boundary. One of the theories suggests that the Pacific plate first cools and captures the uprising mantle in the slab window, and then it causes the accretion of the continental crustal blocks. The alternative theory attributes the accretion to the capture of Farallon plate fragments (microplates) stalled in the ceased Farallon-North America subduction zone. Quantitative judgement between these two end-member concepts requires a 3D thermomechanical numerical modeling. However, the software tool required for such modeling is not available at present in the geodynamic modeling community. The major aim of the presented work is comprised basically of two interconnected tasks. The first task is the development and testing of the research Finite Element code with sufficiently advanced facilities to perform the three-dimensional geological time scale simulations of lithospheric deformation. The second task consists in the application of the developed tool to the Neogene deformations of the crust and the mantle along the San Andreas Fault System in Central and northern California. The geological time scale modeling of lithospheric deformation poses numerous conceptual and implementation challenges for the software tools. Among them is the necessity to handle the brittle-ductile transition within the single computational domain, adequately represent the rock rheology in a broad range of temperatures and stresses, and resolve the extreme deformations of the free surface and internal boundaries. In the framework of this thesis the new Finite Element code (SLIM3D) has been successfully developed and tested. This code includes a coupled thermo-mechanical treatment of deformation processes and allows for an elasto-visco-plastic rheology with diffusion, dislocation and Peierls creep mechanisms and Mohr-Coulomb plasticity. The code incorporates an Arbitrary Lagrangian Eulerian formulation with free surface and Winkler boundary conditions. The modeling technique developed is used to study the aspects influencing the Neogene lithospheric deformation in central and northern California. The model setup is focused on the interaction between three major tectonic elements in the region: the North America plate, the Pacific plate and the Gorda plate, which join together near the Mendocino Triple Junction. Among the modeled effects is the influence of asthenosphere upwelling in the opening slab window on the overlying North American plate. The models also incorporate the captured microplate remnants in the fossil Farallon subduction zone, simplified subducting Gorda slab, and prominent crustal heterogeneity such as the Salinian block. The results show that heating of the mantle roots beneath the older fault zones and the transpression related to fault stepping, altogether, render cooling in the slab window alone incapable to explain eastward migration of the plate boundary. From the viewpoint of the thermomechanical modeling, the results confirm the geological concept, which assumes that a series of microplate capture events has been the primary reason of the inland migration of the San Andreas plate boundary over the recent 20 Ma. The remnants of the Farallon slab, stalled in the fossil subduction zone, create much stronger heterogeneity in the mantle than the cooling of the uprising asthenosphere, providing the more efficient and direct way for transferring the North American terranes to Pacific plate. The models demonstrate that a high effective friction coefficient on major faults fails to predict the distinct zones of strain localization in the brittle crust. The magnitude of friction coefficient inferred from the modeling is about 0.075, which is far less than typical values 0.6 – 0.8 obtained by variety of borehole stress measurements and laboratory data. Therefore, the model results presented in this thesis provide additional independent constrain which supports the “weak-fault” hypothesis in the long-term ongoing debate over the strength of major faults in the SAFS.
This study investigated the warm-temperate to tropical shallow-water Miocene carbonates of the Perfugas basin (Anglona area), northern Sardinia, Italy (Central Mediterranean). The aim of this study was to identify and document the existence and significance of early diagenesis in this carbonate system, especially the diagenetic history, which reflects the diagenetic potential in terms of skeletal mineralogy. The motivation behind the present study was to investigate the role that early cementation has over facies stabilization linked to differences in biotic associations in shallow-water settings. Principal to this was to unravel the amount, kind and distribution of early cements in this type of carbonates, in order to complement previous studies, and hence acquire a more global perspective on non-tropical carbonate settings. The shallow-buried Sedini Limestone Unit was investigated for variations on early diagenetic features, as well as for the type of biotic association, and oxygen and carbon stable isotope stratigraphy. Results showed, that particularly at the Perfugas basin (< 15 km2), which evolves in time from a ramp into a steep-flanked platform, shallow-water facies are characterized by a “transitional” type of biotic association. The biotic assemblages change gradually over time from a heterozoan-rich into a photozoan-rich depositional system. This transition implies a change in the depositional environmental control factors such as temperature. It is considered that sedimentation took place under warm-temperate waters, which shifted to more warmer or tropical waters through time. Moreover, it was noticed that along with these changes, marine early syn-depositional cements (high-Mg calcite), with particular fabrics (e.g. fibrous), gradually contributed to the early lithification of rocks, favoring a steepening of the platform relief. The major controls for the shift of the depositional geometry was triggered by the change of the type of biotic associations (carbonate factory), related with the shift towards warmer conditions, and the development of early marine cementation. The identification of the amount and distribution of different cement phases, porosities and early diagenetic features, within facies and stratigraphy, showed that diagenesis is differential along depth, and within the depositional setting. High-Mg calcite cements (micrite, fibrous and syntaxial inclusion-rich) are early syn-depositional, facies-related (shallow-water), predominant at the platform phase, and marine in origin. Low-Mg calcite cements (bladed, syntaxial inclusionpoor and blocky) are early to late post-depositional, non-facies related (shallow- to deep-water) and shallow-burial marine in origin. However, a particular difference exists when looking at the amount and distribution of low-Mg calcite bladed cements. They become richer in shallow-water facies at the platform phase, suggesting that the enrichment of bladed cementation is linked to the appearance of metastable grains (e.g. aragonite). In both depositional profiles, the development of secondary porosity is the product of fabric-selective dissolution of grains (aragonite, high-Mg calcite) and/or cements (syntaxial inclusion-rich). However, stratigraphy and stable isotopes (oxygen and carbon), indicate that the molds found at shallower facies located beneath, and close to stratigraphic boundaries, have been produced by the infiltration of meteoric-derived water, which caused recrystallization without calcite cementation. Away from these stratigraphic locations, shallow- and deep-water facies show molds, and recrystallization, as well as low-Mg calcite cementation, interpreted as occurring during burial of these sediments by marine waters. The main cement source is suggested to be aragonite. Our results indicate that the Sedini Limestone Unit was transformed in three different diagenetic environments (marine, meteoric and shallow-burial marine); however, the degree of transformation in each diagenetic environment differs in the heterozoan-dominated ramp from the photozoan-dominated platform. It is suggested that the sediments from the ramp follow a diagenetic pathway similar to their heterozoan counterparts (i.e. lack of marine cementation, and loss of primary porosity by compaction), and the sediments from the platform follow a diagenetic pathway similar to their photozoan counterparts (i.e. marine cementation occluding primary porosity). However, in this carbonate setting, cements are Mg-calcite, no meteoric cementation was produced, and secondary porosity at shallow-water facies of the platform phase is mostly open and preserved. Despite the temporal and transitional change in biotic associations, ramp and platform facies (shallow- to deep-water facies) showed an oxygen isotope record overprinted by diagenesis. Oxygen primary marine signatures were not found. It is believed that burial diagenesis (recrystallization and low-Mg calcite cementation) was the main reason. This was unexpected at the ramp, since heterozoan-rich carbonates can hold isotope values close to primary marine signals due to their low-Mg calcite original composition. Ramp and platform facies (shallow- to deep-water facies) showed a carbon isotope record that was less affected by diagenesis. However, only at deep-water facies, did the carbon record show positive values comparable with carbon primary marine signals. The positive carbon values were noticed with major frequency at the platform deep-water facies. Moreover, these values usually showed a covariant trend with the oxygen isotope record; even that the latter did not hold positive values. The main conclusion of this work is that carbonates, deposited under warm-temperate to tropical conditions, have a unique facies, diagenesis and chemostratigraphic expression, which is different from their cool-water heterozoan or warm-water photozoan counterparts, reflecting the “transitional” nature of biotic association.
Landscapes evolve in a complex interplay between climate and tectonics. Thus, the geomorphic characteristics of a landscape can only be understood if both, climatic and tectonic signals of past and ongoing processes can be identified. In order to evaluate the impact of both forcing factors it is crucial to quantify the evolution of geomorphic markers in natural environments. The Cenozoic Andes are an ideal setting to evaluate tectonic and climatic aspects of landscape evolution at different time and length scales in different natural compartments. The Andean Cordillera constitutes the type subduction orogen and is associated with the subduction of the oceanic Nazca Plate beneath the South American continent since at least 200 million years. In Chile and the adjacent regions this convergent margin is characterized by active tectonics, volcanism, and mountain building. Importantly, along the coast of Chile megathrust earthquakes occur frequently and influence landscape evolution. In fact, the largest earthquake ever recorded occurred in south-central Chile in 1960 and comprised a rupture zone of ~ 1000 km length. However, on longer time scales beyond historic documentation of seismicity it is not well known, how such seismotectonic segments have behaved and how they influence the geomorphic evolution of the coastal realms. With several semi-independent morphotectonic segments, recurrent megathrust earthquakes, and a plethora of geomorphic features indicating sustained tectonism, the margin of Chile is thus a key area to study relationships between surface processes and tectonics. In this study, I combined geomorphology, geochronology, sedimentology, and morphometry to quantify the Pliocene-Pleistocene landscape evolution of the tectonically active south-central Chile forearc. Thereby, I provide (1) new results about the influence of seismotectonic forearc segmentation on the geomorphic evolution and (2) new insights in the interaction between climate and tectonics with respect to the morphology of the Chilean forearc region. In particular, I show that the forearc is characterized by three long-term segments that are not correlated with short-lived earthquake-rupture zones that may. These segments are the Nahuelbuta, Toltén, and Bueno segments, each recording a distinct geomorphic and tectonic evolution. The Nahuelbuta and Bueno segments are undergoing active tectonic uplift. The long-term behavior of these two segments is manifested in form of two doubly plunging, growing antiforms that constitute an integral part of the Coastal Cordillera and record the uplift of marine and river terraces. In addition, these uplifting areas have caused major changes in flow directions or rivers. In contrast, the Toltén segment, situated between the two other segments, appears to be quasi-stable. In order to further quantify uplift and incision in the actively deforming Nahuelbuta segment, I dated an erosion surface and fluvial terraces in the Coastal Cordillera with cosmogenic 10Be and 26Al and optically stimulated luminescence, respectively. According to my results, late Pleistocene uplift rates corresponding to 0.88 mm a-1 are faster than surface-uplift rates averaging over the last 5 Ma, which are in the range of 0.21 mm a-1. This discrepancy suggests that surface uplift is highly variable in time and space and might preferably concentrate along reverse faults as indicated by a late Pleistocene flow reversal. In addition, the results of exposure dating with cosmogenic 10Be and 26Al indicate that the morphotectonic segmentation of this region of the forearc has been established in Pliocene time, coeval with the initiation of uplift of the Coastal Cordillera about 5 Ma ago, inferred to be related to a shift in subduction mode from erosion to accretion. Finally, I dated volcanic clasts obtained from alluvial surfaces in the Central Depression, a low-relief sector separating the Coastal from the Main Cordillera, with stable cosmogenic 3He and 21Ne, in order to reveal the controls of sediment accumulation in the forearc. My results document that these gently sloping surfaces have been deposited 150 to 300 ka ago. This deposition may be related to changes in the erosional regime during glacial episodes. Taken together, the data indicates that the overall geomorphic expression of the forearc is of post-Miocene age and may be intimately related to a climatic overprint of the tectonic system. This climatic forcing is also reflected in the topography and local relief of the Central and Southern Andes that vary considerably along the margin, determined by the dominant surface process that in turn is eventually controlled by climate. However, relief also partly reflects surface processes that have taken place under past climatic conditions. This emphasizes that due care has to be exercised when interpreting landscapes as mirrors of modern climates.
The modern foreland basin straddling the eastern margin of the Andean orogen is the prime example of a retro-arc foreland basin system adjacent to a subduction orogen. While widely studied in the central and southern Andes, the spatial and temporal evolution of the Cenozoic foreland basin system in the northern Andes has received considerably less attention. This is in part due to the complex geodynamic boundary conditions, such as the oblique subduction and accretion of the Caribbean plates to the already complex interaction between the Nazca and the South American plates. In the Colombian Andes, for example, a foreland basin system has been forming since ~80 Ma over an area previously affected by rift tectonics during the Mesozoic. This setting of Cenozoic contractile deformation superposed on continental crust pre-strained by extensional processes thus represents a natural, yet poorly studied experimental set-up, where the role of tectonic inheritance on the development of foreland basin systems can be evaluated. However, a detailed documentation of the early foreland basin evolution in this part of the Andes has thus far only been accomplished in the more internal sectors of the orogen. In this study, I integrate new structural, sedimentological and biostratigraphic data with low-temperature thermochronology from the eastern sector of the Colombian Andes, in order to provide the first comprehensive account of mountain building and related foreland basin sedimentation in this part of the orogen, and to assess as to what extent pre-existent basement anisotropies have conditioned the locus of foreland deformation in space and time. In the Medina Basin, along the eastern flank of the Eastern Cordillera, I integrated detailed structural mapping and new sedimentological data with a new chronostratigraphic framework based on detailed palynology that links an eastward-thinning early Oligocene to early Miocene syntectonic wedge containing rapid facies changes with an episode of fast tectonic subsidence starting at ~30 Ma. This record represents the first evidence of topographic loading generated by slip along the principal basement-bounding thrusts in the Eastern Cordillera to the west of the basin and thus constrains the onset of mountain building in this area. A comprehensive assessment of exhumation patterns based on zircon fission-track (ZFT), apatite fission-track (AFT) analysis and thermal modelling reveals the location of these thrust loads to have been located along the contractionally reactivated Soapaga Fault in the axial sector of the Eastern Cordillera. Farther to the east, AFT and ZFT data also document the onset of thrust-induced exhumation associated with contractional reactivation of the main range-bounding Servita Fault at ~20 Ma. Associated with this episode of orogenic growth, peak burial temperature estimates based on vitrinite reflectance data in the Cenozoic sedimentary record of the adjacent Medina Basin documents earlier incorporation of the western sector of the basin into the advancing fold and thrust belt. I combined these new thermochronological data with published AFT analyses and known chronologic indicators of brittle deformation in order to evaluate the patterns of orogenic-front migration in the Andes of central Colombia. This spatiotemporal analysis of deformation reveals an episodic pattern of eastward migration of the orogenic front at an average rate of 2.5-2.7 mm/yr during the Late Cretaceous-Cenozoic. I identified three major stages of orogen propagation. First, following initiation of mountain building in the Central Cordillera during the Late Cretaceous, the orogenic front propagate eastward at slow rates (0.5-3.1 mm/yr) until early Eocene times. Such slow orogenic advance would have resulted from limited accretionary flux related to slow and oblique (SW-NE-oriented) convergence of the Farallon and South American plates during that time. A second stage of rapid orogenic advance (4.0-18.0 mm/yr) during the middle-late Eocene, and locally of at least 100 mm/yr in the middle Eocene, resulted from initial tectonic inversion of the Eastern Cordillera. I correlate this episode of rapid orogen-front migration with an increase in the accretionary flux triggered by acceleration in convergence and a rotation of the convergence vector to a more orogen-perpendicular direction. Finally, stagnation of the Miocene deformation front along former rift-bounding reactivated faults in the eastern flank of the Eastern Cordillera led to a decrease in the rates of orogenic advance. Post-late Miocene-Pliocene thrusting along the actively deforming front of the Eastern Cordillera at this latitude suggests averaged Miocene-Holocene orogen propagation rates of 1.2-2.1 mm/yr. In addition, ZFT data suggest that exhumation along the eastern flank of the orogen occurred at moderate rates of ~0.3 mm/yr during the Miocene, prior to an acceleration of exhumation since the Pliocene, as suggested by recently published AFT data. In order to evaluate the relations between thrust loading and sedimentary facies evolution in the foreland, I analyzed gravel progradation in the foreland basin system. In particular, I compared one-dimensional Eocene to Pliocene sediment accumulation rates in the Medina basin with a three-dimensional sedimentary budget based on the interpretation of ~1800 km of industry-style seismic reflection profiles and borehole data tied to the new chronostratigraphic framework. The sedimentological data from the Medina Basin reveal rapid accumulation of fluvial and lacustrine sediments at rates of up to ~ 0.5 mm/yr during the Miocene. Provenance data based on gravel petrography and paleocurrents reveal that these Miocene fluvial systems were sourced by Upper Cretaceous and Paleocene sedimentary units exposed to the west, in the Eastern Cordillera. Peak sediment-accumulation rates in the upper Carbonera Formation and the Guayabo Group occur during episodes of gravel progradation in the proximal foredeep in the Early and Late Miocene. I interpreted this positive correlation between sediment accumulation and gravel deposition as the direct consequence of thrust activity in the Servita-Lengupá Fault. This contrasts with current models relating gravel progradation to episodes of tectonic quiescence in more distal portions of foreland basin systems and calls for a re-evaluation of tectonic history interpretations inferred from sedimentary units in other mountain belts. In summary, my results document a late Eocene-early Miocene eastward advance of the topographic loads associated with the leading edge of deformation in the northern Andes of Colombia. Crustal thickening of the Eastern Cordillera associated with initiation of thrusting along the Servitá Fault illustrates that this sector of the Andean orogen acquired ~90% of its present width already by the early Miocene (~20 Ma). My data thus demonstrate that inherited crustal anisotropies, such as the former rift-bounding faults of the Eastern Cordillera, favour a non-systematic progression of foreland basin deformation through time by preferentially concentrating accommodation of slip and thrust-loading. These new chronology of exhumation and deformation associated with specific structures in the Colombian Andes also constitutes an important advance towards the understanding of models for hydrocarbon maturation, migration and trap formation along the prolific petroleum province of the Llanos Basin in the modern foredeep area.
The arctic region is undergoing the most rapid environmental change experienced on Earth, and the rate of change is expected to increase over the coming decades. Arctic coasts are particularly vulnerable because they lie at the interface between terrestrial systems dominated by permafrost and marine systems dominated by sea ice. An increased rise in sea level and degradation of sea-ice as predicted by the Intergovernmental Panel on Climate Change in its most recent report and as observed recently in the Arctic will likely result in greater rates of coastal retreat. An increase in coastal erosion would result in dramatic increases in the volume of sediment, organic carbon and contaminants to the Arctic Ocean. These in turn have the potential to create dramatic changes in the geochemistry and biodiversity of the nearshore zone and affect the Arctic Ocean carbon cycle. To calculate estimates of organic carbon input from coastal erosion to the Arctic Ocean, current methods rely on the length of the coastline in the form of non self-similar line datasets. This thesis however emphasizes that using shorelines drawn at different scales can induce changes in the amount of sediment released by 30% in some cases. It proposes a substitute method of computations of erosion based on areas instead of lengths (i.e. buffers instead of shoreline lengths) which can be easily implemented at the circum-Arctic scale. Using this method, variations in quantities of eroded sediment are, on average, 70% less affected by scale changes and are therefore a more reliable method of calculation. Current estimates of coastal erosion rates in the Arctic are scarce and long-term datasets are a handful, which complicates assessment and prognosis of coastal processes, in particular the occurrence of coastal hazards. This thesis aims at filling the gap by providing the first long-term dataset (1951-2006) of coastal erosion on the Bykovsky Peninsula, North-East Siberia. This study shows that the coastline, which is made of ice-rich permafrost, retreated at a mean annual rate of 0.59 m/yr between 1951and 2006. Rates were highly variable: 97.0 % of the rates observed were less than 2 m/yr and 81.6% were less than 1m/yr. However, no significant trend in erosion could be recorded despite the study of five temporal subperiods within 1951-2006. The juxtaposition of wind records could not help to explain erosion records either and this thesis emphasizes the local controls on erosion, in particular the cryostratigraphy, the proximity of the Peninsula to the Lena River Delta freshwater plume and the local topographical constraints on swell development. On ice-rich coastal stretches of the Artic, the interaction of coastal dynamics and permafrost leads to the occurrence of spectacular “C-shaped” depressions termed retrogressive thaw slumps which can reach lengths of up to 650 m. On Herschel Island and at King Point (Yukon Coastal Plain, northern Canada), topographical, sedimentological and biogeochemical surveys were conducted to investigate the present and past activity of these landforms. In particular, undisturbed tundra areas were compared with zones of former slump activity, now stabilized and re-vegetated. This thesis shows that stabilized areas are drier and less prone to plant growth than undisturbed areas and feature fundamentally different geotechnical properties. Radiocarbon dating and topographical surveys indicated until up to 300 BP a likely period of dramatic slump activity on Herschel Island, similar to the one currently observed, which led to the creation of these surfaces. This thesis hypothesizes the occurrence of a ~250 years cycle of slump activity on the Herschel Island shoreline based on the surveyed topography and cryostratigraphy and anticipates higher frequency of slump activity in the future. The variety of processes described in this thesis highlights the changing nature of the intensity and frequency of physical processes acting upon the arctic coast. It also challenges current perceptions of the threats to existing industry and community infrastructure in the Arctic. The increasing presence of humans on Artic coasts coupled with the expected development of shipping will drive an increase in economical and industrial activity on these coasts which remains to be addressed scientifically.
This study presents noble gas compositions (He, Ne, Ar, Kr, and Xe) of lavas from several Hawaiian volcanoes. Lavas from the Hawaii Scientific Drilling Project (HSDP) core, surface samples from Mauna Kea, Mauna Loa, Kilauea, Hualalai, Kohala and Haleakala as well as lavas from a deep well on the summit of Kilauea were investigated. Noble gases, especially helium, are used as tracers for mantle reservoirs, based on the assumption that high 3He/4He ratios (>8 RA) represent material from the deep and supposedly less degassed mantle, whereas lower ratios (~ 8 RA) are thought to represent the upper mantle. Shield stage Mauna Kea, Kohala and Kilauea lavas yielded MORB-like to moderately high 3He/4He ratios, while 3He/4He ratios in post-shield stage Haleakala lavas are MORB-like. Few samples show 20Ne/22Ne and 21Ne/22Ne ratios different from the atmospheric values, however, Mauna Kea and Kilauea lavas with excess in mantle Ne agree well with the Loihi-Kilauea line in a neon three-isotope plot, whereas one Kohala sample plots on the MORB correlation line. The values in the 4He/40Ar* (40Ar* denotes radiogenic Ar) versus 4He diagram imply open system fractionation of He from Ar, with a deficiency in 4He. Calculated 4He/40Ar*, 3He/22Nes (22NeS denotes solar Ne) and 4He/21Ne ratios for the sample suite are lower than the respective production and primordial ratios, supporting the observation of a fractionation of He from the heavier noble gases, with a depletion of He with respect to Ne and Ar. The depletion of He is interpreted to be partly due to solubility controlled gas loss during magma ascent. However, the preferential He loss suggests that He is more incompatible than Ne and Ar during magmatic processes. In a binary mixing model, the isotopic He and Ne pattern are best explained by a mixture of a MORB-like end-member with a plume like or primordial end-member with a fractionation in 3He/22Ne, represented by a curve parameter r of 15 (r=(³He/²²Ne)MORB/(³He/²²Ne)PLUME or PRIMORDIAL). Whether the high 3He/4He ratios in Hawaiian lavas are indicative of a primitive component within the Hawaiian plume or are rather a product of the crystal-melt- partitioning behavior during partial melting remains to be resolved.
The seismicity of the Dead Sea fault zone (DSFZ) during the last two millennia is characterized by a number of damaging and partly devastating earthquakes. These events pose a considerable seismic hazard and seismic risk to Syria, Lebanon, Palestine, Jordan, and Israel. The occurrence rates for large earthquakes along the DSFZ show indications to temporal changes in the long-term view. The aim of this thesis is to find out, if the occurrence rates of large earthquakes (Mw ≥ 6) in different parts of the DSFZ are time-dependent and how. The results are applied to probabilistic seismic hazard assessments (PSHA) in the DSFZ and neighboring areas. Therefore, four time-dependent statistical models (distributions), including Weibull, Gamma, Lognormal and Brownian Passage Time (BPT), are applied beside the exponential distribution (Poisson process) as the classical time-independent model. In order to make sure, if the earthquake occurrence rate follows a unimodal or a multimodal form, a nonparametric bootstrap test of multimodality has been done. A modified method of weighted Maximum Likelihood Estimation (MLE) is applied to estimate the parameters of the models. For the multimodal cases, an Expectation Maximization (EM) method is used in addition to the MLE method. The selection of the best model is done by two methods; the Bayesian Information Criterion (BIC) as well as a modified Kolmogorov-Smirnov goodness-of-fit test. Finally, the confidence intervals of the estimated parameters corresponding to the candidate models are calculated, using the bootstrap confidence sets. In this thesis, earthquakes with Mw ≥ 6 along the DSFZ, with a width of about 20 km and inside 29.5° ≤ latitude ≤ 37° are considered as the dataset. The completeness of this dataset is calculated since 300 A.D. The DSFZ has been divided into three sub zones; the southern, the central and the northern sub zone respectively. The central and the northern sub zones have been investigated but not the southern sub zone, because of the lack of sufficient data. The results of the thesis for the central part of the DSFZ show that the earthquake occurrence rate does not significantly pursue a multimodal form. There is also no considerable difference between the time-dependent and time-independent models. Since the time-independent model is easier to interpret, the earthquake occurrence rate in this sub zone has been estimated under the exponential distribution assumption (Poisson process) and will be considered as time-independent with the amount of 9.72 * 10-3 events/year. The northern part of the DSFZ is a special case, where the last earthquake has occurred in 1872 (about 137 years ago). However, the mean recurrence time of Mw ≥ 6 events in this area is about 51 years. Moreover, about 96 percent of the observed earthquake inter-event times (the time between two successive earthquakes) in the dataset regarding to this sub zone are smaller than 137 years. Therefore, it is a zone with an overdue earthquake. The results for this sub zone verify that the earthquake occurrence rate is strongly time-dependent, especially shortly after an earthquake occurrence. A bimodal Weibull-Weibull model has been selected as the best fit for this sub zone. The earthquake occurrence rate, corresponding to the selected model, is a smooth function of time and reveals two clusters within the time after an earthquake occurrence. The first cluster begins right after an earthquake occurrence, lasts about 80 years, and is explicitly time-dependent. The occurrence rate, regarding to this cluster, is considerably lower right after an earthquake occurrence, increases strongly during the following ten years and reaches its maximum about 0.024 events/year, then decreases over the next 70 years to its minimum about 0.0145 events/year. The second cluster begins 80 years after an earthquake occurrence and lasts until the next earthquake occurs. The earthquake occurrence rate, corresponding to this cluster, increases extremely slowly, such as it can be considered as an almost constant rate about 0.015 events/year. The results are applied to calculate the time-dependent PSHA in the northern part of the DSFZ and neighbouring areas.
This thesis presents investigations on sediments from two African lakes which have been recording changes in their surrounding environmental and climate conditions since more than 200,000 years. Focus of this work is the time of the last Glacial and the Holocene (the last ~100,000 years before present [in the following 100 kyr BP]). One important precondition for this kind of research is a good understanding of the present ecosystems in and around the lakes and of the sediment formation under modern climate conditions. Both studies therefore include investigations on the modern environment (including organisms, soils, rocks, lake water and sediments). A 90 m long sediment sequence was investigated from Lake Tswaing (north-eastern South Africa) using geochemical analyses. These investigations document alternating periods of high detrital input and low (especially autochthonous) organic matter content and periods of low detrital input, carbonatic or evaporitic sedimentation and high autochthonous organic matter content. These alternations are interpreted as changes between relatively humid and arid conditions, respectively. Before c. 75 kyr BP, they seem to follow changes in local insolation whereas afterwards they appear to be acyclic and are probably caused by changes in ocean circulation and/or in the mean position of the Inter-Tropical Convergence Zone (ITCZ). Today, these factors have main influence on precipitation in this area where rainfall occurs almost exclusively during austral summer. All modern organisms were analysed for their biomarker and bulk organic and compound-specific stable carbon isotope composition. The same investigations on sediments from the modern lake floor document the mixed input of the investigated individual organisms and reveal additional influences by methanotrophic bacteria. A comparison of modern sediment characteristics with those of sediments covering the time 14 to 2 kyr BP shows changes in the productivity of the lake and the surrounding vegetation which are best explained by changes in hydrology. More humid conditions are indicated for times older than 10 kyr BP and younger than 7.5 kyr BP, whereas arid conditions prevailed in between. These observations agree with the results from sediment composition and indications from other climate archives nearby. The second lake study deals with Lake Challa, a small, deep crater lake on the foot of Mount Kilimanjaro. In this lake form mm-scale laminated sediments which were analyses with micro-XRF scanning for changes in the element composition. By comparing these results with investigations on thin sections, results from ongoing sediment trap studies, meteorological data, and investigations on the surrounding rocks and soils, I develop a model for seasonal variability in the limnology and sedimentation of Lake Challa. The lake appears to be stratified during the warm rain seasons (October – December and March – May) during which detrital material is delivered to the lake and carbonates precipitate. On the lake floor forms a dark lamina with high contents of Fe and Ti and high Ca/Al and low Mn/Fe ratios. Diatoms bloom during the cool and windy season (June – September) when mixing down to c. 60 m depth provides easily bio-available nutrients. Contemporaneously, Fe and Mn-oxides are precipitating which cause high Mn/Fe ratios in the light diatom-rich laminae of the sediments. Trends in the Mn/Fe ratio of the sediments are interpreted to reflect changes in the intensity or duration of seasonal mixing in Lake Challa. This interpretation is supported by parallel changes in the organic matter and biogenic silica content observed in the 22 m long profile recovered from Lake Challa. This covers the time of the last 25 kyr BP. It documents a transition around 16 kyr BP from relatively well-mixed conditions with high detrital input during glacial times to stronger stratified conditions which are probably related to increasing lake levels in Challa and generally more humid conditions in East Africa. Intensified mixing is recorded for the time of the Younger Dryas and the period between 11.4 and 10.7 kyr BP. For these periods, reduced intensity of the SW monsoon and intensified NE monsoon are reported from archives of the Indian-Asian Monsoon region, arguing for the latter as a probable source for wind mixing in Lake Challa. This connection is probably also responsible for contemporaneous events in the Mn/Fe ratios of the Lake Challa sediments and in other records of northern hemisphere monsoon intensity during the Holocene and underlines the close interaction of global low latitude atmospheric circulation.
Submarine landslides can generate local tsunamis posing a hazard to human lives and coastal facilities. Two major related problems are: (i) quantitative estimation of tsunami hazard and (ii) early detection of the most dangerous landslides. This thesis focuses on both those issues by providing numerical modeling of landslide-induced tsunamis and by suggesting and justifying a new method for fast detection of tsunamigenic landslides by means of tiltmeters. Due to the proximity to the Sunda subduction zone, Indonesian coasts are prone to earthquake, but also landslide tsunamis. The aim of the GITEWS-project (German-Indonesian Tsunami Early Warning System) is to provide fast and reliable tsunami warnings, but also to deepen the knowledge about tsunami hazards. New bathymetric data at the Sunda Arc provide the opportunity to evaluate the hazard potential of landslide tsunamis for the adjacent Indonesian islands. I present nine large mass movements in proximity to Sumatra, Java, Sumbawa and Sumba, whereof the largest event displaced 20 km³ of sediments. Using numerical modeling, I compute the generated tsunami of each event, its propagation and runup at the coast. Moreover, I investigate the age of the largest slope failures by relating them to the Great 1977 Sumba earthquake. Continental slopes off northwest Europe are well known for their history of huge underwater landslides. The current geological situation west of Spitsbergen is comparable to the continental margin off Norway after the last glaciation, when the large tsunamigenic Storegga slide took place. The influence of Arctic warming on the stability of the Svalbard glacial margin is discussed. Based on new geophysical data, I present four possible landslide scenarios and compute the generated tsunamis. Waves of 6 m height would be capable of reaching northwest Europe threatening coastal areas. I present a novel technique to detect large submarine landslides using an array of tiltmeters, as a possible tool in future tsunami early warning systems. The dislocation of a large amount of sediment during a landslide produces a permanent elastic response of the earth. I analyze this response with a mathematical model and calculate the theoretical tilt signal. Applications to the hypothetical Spitsbergen event and the historical Storegga slide show tilt signals exceeding 1000 nrad. The amplitude of landslide tsunamis is controlled by the product of slide volume and maximal velocity (slide tsunamigenic potential). I introduce an inversion routine that provides slide location and tsunamigenic potential, based on tiltmeter measurements. The accuracy of the inversion and of the estimated tsunami height near the coast depends on the noise level of tiltmeter measurements, the distance of tiltmeters from the slide, and the slide tsunamigenic potential. Finally, I estimate the applicability scope of this method by employing it to known landslide events worldwide.
Active continental margins are affected by complex feedbacks between tectonic, climate and surface processes, the intricate relations of which are still a matter of discussion. The Chilean convergent margin, forming the outstanding Andean subduction orogen, constitutes an ideal natural laboratory for the investigation of climate, tectonics and their interactions. In order to study both processes, I examined marine and lacustrine sediments from different depositional environments on- and offshore the south-central Chilean coast (38-40°S). I combined sedimentological, geochemical and isotopical analyses to identify climatic and tectonic signals within the sedimentary records. The investigation of marine trench sediments (ODP Site 1232, SONNE core 50SL) focused on frequency changes of turbiditic event layers since the late Pleistocene. In the active margin setting of south-central Chile, these layers were considered to reflect periodically occurring earthquakes and to constitute an archive of the regional paleoseismicity. The new results indicate glacial-interglacial changes in turbidite frequencies during the last 140 kyr, with short recurrence times (~200 years) during glacial and long recurrence times (~1000 years) during interglacial periods. Hence, the generation of turbidites appears to be strongly influenced by climate and sea level changes, which control on the amount of sediment delivered to the shelf edge and therewith the stability of the continental slope: more stable slope conditions during interglacial periods entail lower turbidite frequencies than in glacial periods. Since glacial turbidite recurrence times are congruent with earthquake recurrence times derived from the historical record and other paleoseismic archives of the region, I concluded that only during cold stages the sediment availability and slope instability enabled the complete series of large earthquakes to be recorded. The sediment transport to the shelf region is not only driven by climate conditions but also influenced by local forearc tectonics. Accelerating uplift rates along major tectonic structures involved drainage anomalies and river flow inversions, which seriously altered the sediment supply to the Pacific Ocean. Two examples for the tectonic hindrance of fluvial systems are the coastal lakes Lago Lanalhue and Lago Lleu Lleu. Both lakes developed within former river valleys, which once discharged towards the Pacific and were dammed by tectonically uplifted sills at ~8000 yr BP. Analyses of sediment cores from the lakes showed similar successions of marine/brackish deposits at the bottom, covered by lacustrine sediments on top. Dating of the transitions between these different units and the comparison with global sea level curves allowed me to calculate local Holocene uplift rates, which are distinctly higher for the upraised sills (Lanalhue: 8.83 ± 2.7 mm/yr, Lleu Lleu: 11.36 ± 1.77 mm/yr) than for the lake basins (Lanalhue: 0.42 ± 0.71 mm/yr, Lleu Lleu: 0.49 ± 0.44 mm/yr). I hence considered the sills to be the surface expression of a blind thrust associated with a prominent inverse fault that is controlling regional uplift and folding. After the final separation of Lago Lanalhue and Lago Lleu Lleu from the Pacific, a constant deposition of lacustrine sediments preserved continuous records of local environmental changes. Sequences from both lakes indicate a long-term climate trend with a significant shift from more arid conditions during the Mid-Holocene (8000 – 4200 cal yr BP) to more humid conditions during the Late Holocene (4200 cal yr BP – present). This trend is consistent with other regional paleoclimatic data and interpreted to reflect changes in the strength/position of the Southern Westerly Winds. Since ~5000 years, sediments of Lago Lleu Lleu are marked by numerous intercalated detrital layers that recur with a mean frequency of ~210 years. Deposition of these layers may be triggered by local tectonics (i.e. earthquakes), but may also originate from changes in the local climate (e.g. onset of modern ENSO conditions). During the last 2000 years, pronounced variations in the terrigenous sediment supply to both lakes suggest important hydrological changes on the centennial time-scale as well. A lower input of terrigenous matter points to less humid phases between 200 cal yr B.C. - 150 cal yr A.D., 900 - 1350 cal yr A.D. and 1850 cal yr A.D. to present (broadly corresponding to the Roman, Medieval, and Modern Warm Periods). More humid periods persisted from 150 - 900 cal yr A.D. and 1350 - 1850 cal yr A.D. (broadly corresponding to the Dark Ages and the Little Ice Age). In conclusion, the combined investigation of marine and lacustrine sediments is a feasible method for the reconstruction of climatic and tectonic processes on different time scales. My approach allows exploring both climate and tectonics in one and the same archive, and is largely transferable to other active margins worldwide.
The Earth’s magnetic field (EMF) is generated by convections in the electrically conducting liquid iron-rich outer core, modified by the Earth’s rotation. A drastic manifestation of the dynamics of this fluid body is the occurrence of geomagnetic field reversals in the Earth’s history but also geomagnetic excursions, which are more frequent features of otherwise stable polarity chrons, but often poorly constrained in the geological record. To better understand the origin of the field, we need to know how the field has varied on different geological timescales. This includes not only information about changes in the ancient field’s direction but also about the absolute intensity (palaeointensity) and the age. This palaeointensity record is needed for compiling a full-vector description of the field. A palaeomagnetic and palaeointensity study on lava flows allows gaining insights about the evolution of the EMF through time and space. However, constraining the EMF evolution over different geological timescales remains a difficult objective due to the paucity of available palaeointensity data. One new alternative approach in palaeointensity studies is the recently proposed multispecimen parallel differential pTRM (MS) method, which has potentially several advantages over the commonly used Thellier method, because it is in theory independent of magnetic domain state, less prone to biasing effects, such as thermal alteration and significantly faster to perform in the laboratory. A study of highly active volcanic regions, such as the Trans-Mexican Volcanic Belt, seems promising when attempting a full-vector reconstruction or when looking for field excursions. One aim of this thesis was to gain new information about the occurrence and global validity of geomagnetic excursions from the Brunhes- or Matuyama Chron. For this purpose some 75 lava flows from within the Trans-Mexican Volcanic Belt were sampled for palaeomagnetic analyses. The scatter of virtual geomagnetic poles from lavas younger than 1.7 Ma was used for estimating palaeosecular variation and was found to be consistent with latitude dependent Model G and other high quality palaeomagnetic data from Mexico. The palaeomagnetic mean-vectors of 56 lavas were correlated to the Geomagnetic Polarity Timescale supplemented with information on geomagnetic excursions. On the grounds of their associated radioisotopic ages, four lavas were tentatively correlated with known excursions from marine records. Two lava flows dating of Brunhes Chron were associated with the Big Lost and Delts/Stage 17 excursions, respectively. From further two flows dating of Matuyama Chron, one flow was associated with either the Santa Rosa- or Kamikatsura excursions, while the other could have been emplaced during the Gilsa excursion. The most significant outcome was the finding that both Brunhes excursional flows display nearly fully reversed directions that deviate almost 180°C from the expected normal polarity direction. This observation could indicate that in particular the Big Lost and Delta/Stage17 excursions may represent other short periods during which the field completed a full reversal for a short time, such as was previously found for other older cryptochrons or tiny wiggles. Another focus of this thesis was set on estimating the feasibility of the new MS method for routine palaeointensity determination. This was accomplished by applying the MS method to samples from 11 historical lava flows from Mexico and Iceland from which the actual field intensity was either known from contemporary observatory data, or deduced from magnetic field models. Comparing observed with expected intensity values allowed to test the accuracy of the MS method. It a was found that the majority of palaeointensity estimates after the MS method yielded results that were very close or indistinguishable within the range of uncertainty from the expected values. However, a general trend towards an overestimate in the palaeointensity was also observed, which, on the grounds of corroborating rock magnetic analyses, was associated with multidomain material. This observation was taken as first evidence that the MS method is not entirely independent of magnetic domain state, as was originally claimed. However, a second experiment in which a modification of the most widely used Thellier method was applied to sister samples from 5 Icelandic flows revealed that, in comparison to the MS method, the latter produced more accurate and statistically better defined palaeointensities. Thus, from these first results, the MS method appeared as a viable alternative for future palaeointensity studies. Subsequently it was attempted to corroborate the directional record from Mexican lavas with palaeointensity data. It was possible to acquire palaeointensity estimates for 32 out of 51 investigated lava flows. These new results revealed that the new MS palaeointensities for Mexico are, with a high degree of statistical significance, around 30% higher than expected. The generally high palaeointensities seem to corroborate the results obtained from historical lava flows in this study and other previous studies on synthetic samples where domain state effects were found to cause overestimates in the palaeointensity of up to 30 per cent in the MS method. The primary process that leads to this overestimate is assigned to an asymmetry in the demagnetisation and remagnetisation process. Yet, this overestimate is expected to be no larger than what might be expected from Thellier experiments performed on samples with a given degree of multidomain behaviour.
Modern acquisition of seismic data on receiver networks worldwide produces an increasing amount of continuous wavefield recordings. Hence, in addition to manual data inspection, seismogram interpretation requires new processing utilities for event detection, signal classification and data visualization. Various machine learning algorithms, which can be adapted to seismological problems, have been suggested in the field of pattern recognition. This can be done either by means of supervised learning using manually defined training data or by unsupervised clustering and visualization. The latter allows the recognition of wavefield patterns, such as short-term transients and long-term variations, with a minimum of domain knowledge. Besides classical earthquake seismology, investigations of temporal patterns in seismic data also concern novel approaches such as noise cross-correlation or ambient seismic vibration analysis in general, which have moved into focus within the last decade. In order to find records suitable for the respective approach or simply for quality control, unsupervised preprocessing becomes important and valuable for large data sets. Machine learning techniques require the parametrization of the data using feature vectors. Applied to seismic recordings, wavefield properties have to be computed from the raw seismograms. For an unsupervised approach, all potential wavefield features have to be considered to reduce subjectivity to a minimum. Furthermore, automatic dimensionality reduction, i.e. feature selection, is required in order to decrease computational cost, enhance interpretability and improve discriminative power. This study presents an unsupervised feature selection and learning approach for the discovery, imaging and interpretation of significant temporal patterns in seismic single-station or network recordings. In particular, techniques permitting an intuitive, quickly interpretable and concise overview of available records are suggested. For this purpose, the data is parametrized by real-valued feature vectors for short time windows using standard seismic analysis tools as feature generation methods, such as frequency-wavenumber, polarization, and spectral analysis. The choice of the time window length is dependent on the expected durations of patterns to be recognized or discriminated. We use Self-Organizing Maps (SOMs) for a data-driven feature selection, visualization and clustering procedure, which is particularly suitable for high-dimensional data sets. Using synthetics composed of Rayleigh and Love waves and three different types of real-world data sets, we show the robustness and reliability of our unsupervised learning approach with respect to the effect of algorithm parameters and data set properties. Furthermore, we approve the capability of the clustering and imaging techniques. For all data, we find improved discriminative power of our feature selection procedure compared to feature subsets manually selected from individual wavefield parametrization methods. In particular, enhanced performance is observed compared to the most favorable individual feature generation method, which is found to be the frequency spectrum. The method is applied to regional earthquake records at the European Broadband Network with the aim to define suitable features for earthquake detection and seismic phase classification. For the latter, we find that a combination of spectral and polarization features favor S wave detection at a single receiver. However, SOM-based visualization of phase discrimination shows that clustering applied to the records of two stations only allows onset or P wave detection, respectively. In order to improve the discrimination of S waves on receiver networks, we recommend to consider additionally the temporal context of feature vectors. The application to continuous recordings of seismicity close to an active volcano (Mount Merapi, Java, Indonesia) shows that two typical volcano-seismic events (VTB and Guguran) can be detected and distinguished by clustering. In contrast, so-called MP events cannot be discriminated. Comparable results are obtained for selected features and recognition rates regarding a previously implemented supervised classification system. Finally, we test the reliability of wavefield clustering to improve common ambient vibration analysis methods such as estimation of dispersion curves and horizontal to vertical spectral ratios. It is found, that in general, the identified short- and long-term patterns have no significant impact on those estimates. However, for individual sites, effects of local sources can be identified. Leaving out the corresponding clusters, yields reduced uncertainties or allows for improving estimation of dispersion curves.
Modern anthropogenic forcing of atmospheric chemistry poses the question of how the Earth System will respond as thousands of gigatons of greenhouse gas are rapidly added to the atmosphere. A similar, albeit nonanthropogenic, situation occurred during the early Paleogene, when catastrophic release of carbon to the atmosphere triggered abrupt increase in global temperatures. The best documented of these events is the Paleocene-Eocene Thermal Maximum (PETM, ~55 Ma) when the magnitude of carbon addition to the oceans and atmosphere was similar to those expected for the future. This event initiated global warming, changes in hydrological cycles, biotic extinction and migrations. A recently proposed hypothesis concerning changes in marine ecosystems suggests that this global warming strongly influenced the shallow-water biosphere, triggering extinctions and turnover in the Larger Foraminifera (LF) community and the demise of corals. The successions from the Adriatic Carbonate Platform (SW Slovenia) represent an ideal location to test the hypothesis of a possible causal link between the PETM and evolution of shallow-water organisms because they record continuous sedimentation from the Late Paleocene to the Early Eocene and are characterized by a rich biota, especially LF, fundamental for detailed biostratigraphic studies. In order to reconstruct paleoenvironmental conditions during deposition, I focused on sedimentological analysis and paleoecological study of benthic assemblages. During the Late Paleocene-earliest Eocene, sedimentation occurred on a shallow-water carbonate ramp system characterized by enhanced nutrient levels. LF represent the common constituent of the benthic assemblages that thrived in this setting throughout the Late Paleocene to the Early Eocene. With detailed biostratigraphic and chemostratigraphic analyses documenting the most complete record to date available for the PETM event in a shallow-water marine environment, I correlated chemostratigraphically for the first time the evolution of LF with the δ¹³C curves. This correlation demonstrated that no major turnover in the LF communities occurred synchronous with the PETM; thus the evolution of LF was mainly controlled by endogenous biotic forces. The study of Late Thanetian metric-sized microbialite-coral mounds which developed in the middle part of the ramp, documented the first Cenozoic occurrence of microbially-cemented mounds. The development of these mounds, with temporary dominance of microbial communities over corals, suggest environmentally-triggered “phase shifts” related to frequent fluctuations of nutrient/turbidity levels during recurrent wet phases which preceding the extreme greenhouse conditions of the PETM. The paleoecological study of the coral community in the microbialites-coral mounds, the study of corals from Early Eocene platform from SW France, and a critical, extensive literature research of Late Paleocene – Early Eocene coral occurrences from the Tethys, the Atlantic, the Caribbean realms suggested that these corals types, even if not forming extensive reefs, are common in the biofacies as small isolated colonies, piles of rubble or small patch-reefs. These corals might have developed ‘alternative’ life strategies to cope with harsh conditions (high/fluctuating nutrients/turbidity, extreme temperatures, perturbation of aragonite saturation state) during the greenhouse times of the early Paleogene, representing a good fossil analogue to modern corals thriving close to their thresholds for survival. These results demonstrate the complexity of the biological responses to extreme conditions, not only in terms of temperature but also nutrient supply, physical disturbance and their temporal variability and oscillating character.
Foreland-basin systems are excellent archives to decipher the feedbacks between surface and tectonic processes in orogens. The sedimentary architecture of a foreland-basin system reflects the balance between tectonic subsidence causing long-term accommodation space and sediment influx corresponding to efficiency of erosion and mass-redistribution processes. In order to explore the effects of climatic and tectonic forcing in such a system, I investigated the Oligo-Miocene foreland-basin sediments of the southern Alborz mountains, an intracontinental orogen in northern Iran, related to the Arabia-Eurasia continental collision. This work includes absolute dating methods such as 40Ar/39Ar and zircon (U-Th)/He thermochronology, magnetostratigraphy, sedimentological analysis, sandstone and conglomerate provenance study, carbon and oxygen isotope analysis, and clay mineralogy study. Results show a systematic correlation between coarsening-upward cycles and sediment accumulation rates in the basin on 105 to 106yr time scales. During thrust loading phases, the coarse-grained fraction supplied by the uplifting range is stored in the proximal part of the basin (sedimentary facies retrogradation), while fine-grained sediments are deposited in distal sectors. Variations in sediment provenance during these phases of enhanced tectonic activity give evidence for erosional unroofing phases and/or drainage-reorganization events. In addition, enhanced tectonic activity promoted the growth of topography and associated orographic barrier effects, as demonstrated by sedimentologic indicators and the analysis of stable C and O isotopes from calcareous paleosols and lacustrine/palustrine samples. Extensive progradation of coarse-grained deposits occurs during phases of decreased subsidence, when the coarse-grained fraction supplied by the uplifting range cannot be completely stored in the proximal part of the basin. In this environment, a reduction in basin subsidence is associated with laterally stacked fluvial channel deposits, and is related to intra-foreland uplift, as documented by growth strata, tectonic tilting, and sediment reworking. Increase in sediment accumulation rate associated with progradation of vertically-stacked coarse-grained fluvial channels also occurs. Paleosol O-isotope data shows that this increase is related to wetter climatic phases, suggesting that surface processes are more efficient and exhumation rates increase, giving rise to a positive feedback. Furthermore, isotopic and sedimentologic data show that starting from 10-9 Ma, climate became less arid with an increase in seasonality of precipitation. Because important changes were also recorded in the Mediterranean Sea and Asia at that time, the evidence for climatic variability observed in the Alborz mountains most likely reflects changes in Northern Hemisphere atmospheric circulation patterns. This study has additional implications for the evolution of the Alborz mountains and the Arabia-Eurasia continental collision zone. At the orogenic scale, the locus of deformation did not move steadily southward, but stepped forward and backward since Oligocene time. In particular, from ~ 17.5 to 6.2 Ma the orogen grew by a combination of frontal accretion and wedge-internal deformation on time scales of ca. 0.7 to 2 m.y. Moreover, the provenance data suggest that prior to 10-9 Ma the shortening direction changed from NW-SE to NNE-SSW, in agreement with structural data. On the scale of the entire collision zone, the evolution of the studied basins and adjacent mountain ranges suggests a new geodynamic model for the evolution of the Arabia-Eurasia continental collision zone. Numerous sedimentary basins in the Alborz mountains and in other locations of the Arabia-Eurasia collision zone record a change from a tensional (transtensional) to a compressional (transpressional) tectonic setting by ~ 36 Ma. I interpret this to reflect the onset of subduction of the stretched Arabian continental lithosphere beneath central Iran, leading to moderate plate coupling and lower- and upper-plate deformation (soft continental collision). The increase in deformation rates in the southern Alborz mountains from ~ 17.5 Ma suggests that significant upper-plate deformation must have started by the early Miocene most likely in response to an increase in degree of plate coupling. I suggest that this was related to the subduction of thicker Arabian continental lithosphere and the consequent onset of hard continental collision. This model reconciles the apparent lag time of 15-20 m.y between the late Eocene to early Oligocene age for the initial Arabia-Eurasia continental collision and the onset of widespread deformation across the collision zone to the north in early to late Miocene time.
Recent years witnessed a vast advent of stalagmites as palaeoclimate archives. The multitude of geochemical and physical proxies and a promise of a precise and accurate age model greatly appeal to palaeoclimatologists. Although substantial progress was made in speleothem-based palaeoclimate research and despite high-resolution records from low-latitudinal regions, proving that palaeo-environmental changes can be archived on sub-annual to millennial time scales our comprehension of climate dynamics is still fragmentary. This is in particular true for the summer monsoon system on the Indian subcontinent. The Indian summer monsoon (ISM) is an integral part of the intertropical convergence zone (ITCZ). As this rainfall belt migrates northward during boreal summer, it brings monsoonal rainfall. ISM strength depends however on a variety of factors, including snow cover in Central Asia and oceanic conditions in the Indic and Pacific. Presently, many of the factors influencing the ISM are known, though their exact forcing mechanism and mutual relations remain ambiguous. Attempts to make an accurate prediction of rainfall intensity and frequency and drought recurrence, which is extremely important for South Asian countries, resemble a puzzle game; all interaction need to fall into the right place to obtain a complete picture. My thesis aims to create a faithful picture of climate change in India, covering the last 11,000 ka. NE India represents a key region for the Bay of Bengal (BoB) branch of the ISM, as it is here where the monsoon splits into a northwestward and a northeastward directed arm. The Meghalaya Plateau is the first barrier for northward moving air masses and receives excessive summer rainfall, while the winter season is very dry. The proximity of Meghalaya to the Tibetan Plateau on the one hand and the BoB on the other hand make the study area a key location for investigating the interaction between different forcings that governs the ISM. A basis for the interpretation of palaeoclimate records, and a first important outcome of my thesis is a conceptual model which explains the observed pattern of seasonal changes in stable isotopes (d18O and d2H) in rainfall. I show that although in tropical and subtropical regions the amount effect is commonly called to explain strongly depleted isotope values during enhanced rainfall, alone it cannot account for observed rainwater isotope variability in Meghalaya. Monitoring of rainwater isotopes shows no expected negative correlation between precipitation amount and d18O of rainfall. In turn I find evidence that the runoff from high elevations carries an inherited isotopic signature into the BoB, where during the ISM season the freshwater builds a strongly depleted plume on top of the marine water. The vapor originating from this plume is likely to memorize' and transmit further very negative d18O values. The lack of data does not allow for quantication of this plume effect' on isotopes in rainfall over Meghalaya but I suggest that it varies on seasonal to millennial timescales, depending on the runoff amount and source characteristics. The focal point of my thesis is the extraction of climatic signals archived in stalagmites from NE India. High uranium concentration in the stalagmites ensured excellent age control required for successful high-resolution climate reconstructions. Stable isotope (d18O and d13C) and grey-scale data allow unprecedented insights into millennial to seasonal dynamics of the summer and winter monsoon in NE India. ISM strength (i. e. rainfall amount) is recorded in changes in d18Ostalagmites. The d13C signal, reflecting drip rate changes, renders a powerful proxy for dry season conditions, and shows similarities to temperature-related changes on the Tibetan Plateau. A sub-annual grey-scale profile supports a concept of lower drip rate and slower stalagmite growth during dry conditions. During the Holocene, ISM followed a millennial-scale decrease of insolation, with decadal to centennial failures resulting from atmospheric changes. The period of maximum rainfall and enhanced seasonality corresponds to the Holocene Thermal Optimum observed in Europe. After a phase of rather stable conditions, 4.5 kyr ago, the strengthening ENSO system dominated the ISM. Strong El Nino events weakened the ISM, especially when in concert with positive Indian Ocean dipole events. The strongest droughts of the last 11 kyr are recorded during the past 2 kyr. Using the advantage of a well-dated stalagmite record at hand I tested the application of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) to detect sub-annual to sub-decadal changes in element concentrations in stalagmites. The development of a large ablation cell allows for ablating sample slabs of up to 22 cm total length. Each analyzed element is a potential proxy for different climatic parameters. Combining my previous results with the LAICP- MS-generated data shows that element concentration depends not only on rainfall amount and associated leaching from the soil. Additional factors, like biological activity and hydrogeochemical conditions in the soil and vadose zone can eventually affect the element content in drip water and in stalagmites. I present a theoretical conceptual model for my study site to explain how climatic signals can be transmitted and archived in stalagmite carbonate. Further, I establish a first 1500 year long element record, reconstructing rainfall variability. Additionally, I hypothesize that volcanic eruptions, producing large amounts of sulfuric acid, can influence soil acidity and hence element mobilization.
The Tibetan Plateau is the largest elevated landmass in the world and profoundly influences atmospheric circulation patterns such as the Asian monsoon system. Therefore this area has been increasingly in focus of palaeoenvironmental studies. This thesis evaluates the applicability of organic biomarkers for palaeolimnological purposes on the Tibetan Plateau with a focus on aquatic macrophyte-derived biomarkers. Submerged aquatic macrophytes have to be considered to significantly influence the sediment organic matter due to their high abundance in many Tibetan lakes. They can show highly 13C-enriched biomass because of their carbon metabolism and it is therefore crucial for the interpretation of δ13C values in sediment cores to understand to which extent aquatic macrophytes contribute to the isotopic signal of the sediments in Tibetan lakes and in which way variations can be explained in a palaeolimnological context. Additionally, the high abundance of macrophytes makes them interesting as potential recorders of lake water δD. Hydrogen isotope analysis of biomarkers is a rapidly evolving field to reconstruct past hydrological conditions and therefore of special relevance on the Tibetan Plateau due to the direct linkage between variations of monsoon intensity and changes in regional precipitation / evaporation balances. A set of surface sediment and aquatic macrophyte samples from the central and eastern Tibetan Plateau was analysed for composition as well as carbon and hydrogen isotopes of n-alkanes. It was shown how variable δ13C values of bulk organic matter and leaf lipids can be in submerged macrophytes even of a single species and how strongly these parameters are affected by them in corresponding sediments. The estimated contribution of the macrophytes by means of a binary isotopic model was calculated to be up to 60% (mean: 40%) to total organic carbon and up to 100% (mean: 66%) to mid-chain n-alkanes. Hydrogen isotopes of n-alkanes turned out to record δD of meteoric water of the summer precipitation. The apparent enrichment factor between water and n-alkanes was in range of previously reported ones (≈-130‰) at the most humid sites, but smaller (average: -86‰) at sites with a negative moisture budget. This indicates an influence of evaporation and evapotranspiration on δD of source water for aquatic and terrestrial plants. The offset between δD of mid- and long-chain n-alkanes was close to zero in most of the samples, suggesting that lake water as well as soil and leaf water are affected to a similar extent by those effects. To apply biomarkers in a palaeolimnological context, the aliphatic biomarker fraction of a sediment core from Lake Koucha (34.0° N; 97.2° E; eastern Tibetan Plateau) was analysed for concentrations, δ13C and δD values of compounds. Before ca. 8 cal ka BP, the lake was dominated by aquatic macrophyte-derived mid-chain n-alkanes, while after 6 cal ka BP high concentrations of a C20 highly branched isoprenoid compound indicate a predominance of phytoplankton. Those two principally different states of the lake were linked by a transition period with high abundances of microbial biomarkers. δ13C values were relatively constant for long-chain n-alkanes, while mid-chain n-alkanes showed variations between -23.5 to -12.6‰. Highest values were observed for the assumed period of maximum macrophyte growth during the late glacial and for the phytoplankton maximum during the middle and late Holocene. Therefore, the enriched values were interpreted to be caused by carbon limitation which in turn was induced by high macrophyte and primary productivity, respectively. Hydrogen isotope signatures of mid-chain n-alkanes have been shown to be able to track a previously deduced episode of reduced moisture availability between ca. 10 and 7 cal ka BP, indicated by a 20‰ shift towards higher δD values. Indications for cooler episodes at 6.0, 3.1 and 1.8 cal ka BP were gained from drops of biomarker concentrations, especially microbial-derived hopanoids, and from coincidental shifts towards lower δ13C values. Those episodes correspond well with cool events reported from other locations on the Tibetan Plateau as well as in the Northern Hemisphere. To conclude, the study of recent sediments and plants improved the understanding of factors affecting the composition and isotopic signatures of aliphatic biomarkers in sediments. Concentrations and isotopic signatures of the biomarkers in Lake Koucha could be interpreted in a palaeolimnological context and contribute to the knowledge about the history of the lake. Aquatic macrophyte-derived mid-chain n-alkanes were especially useful, due to their high abundance in many Tibetan Lakes and their ability to record major changes of lake productivity and palaeo-hydrological conditions. Therefore, they have the potential to contribute to a fuller understanding of past climate variability in this key region for atmospheric circulation systems.
Crustal deformation can be the result of volcanic and tectonic activity such as fault dislocation and magma intrusion. The crustal deformation may precede and/or succeed the earthquake occurrence and eruption. Mitigating the associated hazard, continuous monitoring of the crustal deformation accordingly has become an important task for geo-observatories and fast response systems. Due to highly non-linear behavior of the crustal deformation fields in time and space, which are not always measurable using conventional geodetic methods (e.g., Leveling), innovative techniques of monitoring and analysis are required. In this thesis I describe novel methods to improve the ability for precise and accurate mapping the spatiotemporal surface deformation field using multi acquisitions of satellite radar data. Furthermore, to better understand the source of such spatiotemporal deformation fields, I present novel static and time dependent model inversion approaches. Almost any interferograms include areas where the signal decorrelates and is distorted by atmospheric delay. In this thesis I detail new analysis methods to reduce the limitations of conventional InSAR, by combining the benefits of advanced InSAR methods such as the permanent scatterer InSAR (PSI) and the small baseline subsets (SBAS) with a wavelet based data filtering scheme. This novel InSAR time series methodology is applied, for instance, to monitor the non-linear deformation processes at Hawaii Island. The radar phase change at Hawaii is found to be due to intrusions, eruptions, earthquakes and flank movement processes and superimposed by significant environmental artifacts (e.g., atmospheric). The deformation field, I obtained using the new InSAR analysis method, is in good agreement with continuous GPS data. This provides an accurate spatiotemporal deformation field at Hawaii, which allows time dependent source modeling. Conventional source modeling methods usually deal with static deformation field, while retrieving the dynamics of the source requires more sophisticated time dependent optimization approaches. This problem I address by combining Monte Carlo based optimization approaches with a Kalman Filter, which provides the model parameters of the deformation source consistent in time. I found there are numerous deformation sources at Hawaii Island which are spatiotemporally interacting, such as volcano inflation is associated to changes in the rifting behavior, and temporally linked to silent earthquakes. I applied these new methods to other tectonic and volcanic terrains, most of which revealing the importance of associated or coupled deformation sources. The findings are 1) the relation between deep and shallow hydrothermal and magmatic sources underneath the Campi Flegrei volcano, 2) gravity-driven deformation at Damavand volcano, 3) fault interaction associated with the 2010 Haiti earthquake, 4) independent block wise flank motion at the Hilina Fault system, Kilauea, and 5) interaction between salt diapir and the 2005 Qeshm earthquake in southern Iran. This thesis, written in cumulative form including 9 manuscripts published or under review in peer reviewed journals, improves the techniques for InSAR time series analysis and source modeling and shows the mutual dependence between adjacent deformation sources. These findings allow more realistic estimation of the hazard associated with complex volcanic and tectonic systems.
The origin and evolution of granites has been widely studied because granitoid rocks constitute a major portion of the Earth ́s crust. The formation of granitic magma is, besides temperature mainly triggered by the water content of these rocks. The presence of water in magmas plays an important role due to the ability of aqueous fluids to change the chemical composition of the magma. The exsolution of aqueous fluids from melts is closely linked to a fractionation of elements between the two phases. Then, aqueous fluids migrate to shallower parts of the Earth ́s crust because of it ́s lower density compared to that of melts and adjacent rocks. This process separates fluids and melts, and furthermore, during the ascent, aqueous fluids can react with the adjacent rocks and alter their chemical signature. This is particularly impor- tant during the formation of magmatic-hydrothermal ore deposits or in the late stages of the evolution of magmatic complexes. For a deeper insight to these processes, it is essential to improve our knowledge on element behavior in such systems. In particular, trace elements are used for these studies and petrogenetic interpretations because, unlike major elements, they are not essential for the stability of the phases involved and often reflect magmatic processes with less ambiguity. However, for the majority of important trace elements, the dependence of the geochemical behavior on temperature, pressure, and in particular on the composition of the system are only incompletely or not at all experimentally studied. Former studies often fo- cus on the determination of fluid−melt partition coefficients (Df/m=cfluid/cmelt) of economically interesting elements, e.g., Mo, Sn, Cu, and there are some partitioning data available for ele- ments that are also commonly used for petrological interpretations. At present, no systematic experimental data on trace element behavior in fluid−melt systems as function of pressure, temperature, and chemical composition are available. Additionally, almost all existing data are based on the analysis of quenched phases. This results in substantial uncertainties, particularly for the quenched aqueous fluid because trace element concentrations may change upon cooling. The objective of this PhD thesis consisted in the study of fluid−melt partition coefficients between aqueous solutions and granitic melts for different trace elements (Rb, Sr, Ba, La, Y, and Yb) as a function of temperature, pressure, salinity of the fluid, composition of the melt, and experimental and analytical approach. The latter included the refinement of an existing method to measure trace element concentrations in fluids equilibrated with silicate melts di- rectly at elevated pressures and temperatures using a hydrothermal diamond-anvil cell and synchrotron radiation X-ray fluorescence microanalysis. The application of this in-situ method enables to avoid the main source of error in data from quench experiments, i.e., trace element concentration in the fluid. A comparison of the in-situ results to data of conventional quench experiments allows a critical evaluation of quench data from this study and literature data. In detail, starting materials consisted of a suite of trace element doped haplogranitic glasses with ASI varying between 0.8 and 1.4 and H2O or a chloridic solution with m NaCl/KCl=1 and different salinities (1.16 to 3.56 m (NaCl+KCl)). Experiments were performed at 750 to 950◦C and 0.2 or 0.5 GPa using conventional quench devices (externally and internally heated pressure vessels) with different quench rates, and at 750◦C and 0.2 to 1.4 GPa with in-situ analysis of the trace element concentration in the fluids. The fluid−melt partitioning data of all studied trace elements show 1. a preference for the melt (Df/m < 1) at all studied conditions, 2. one to two orders of magnitude higher Df/m using chloridic solutions compared to experiments with H2O, 3. a clear dependence on the melt composition for fluid−melt partitioning of Sr, Ba, La, Y, and Yb in experiments using chloridic solutions, 4. quench rate−related differences of fluid−melt partition coefficients of Rb and Sr, and 5. distinctly higher fluid−melt partitioning data obtained from in-situ experiments than from comparable quench runs, particularly in the case of H2O as starting solution. The data point to a preference of all studied trace elements for the melt even at fairly high salinities, which contrasts with other experimental studies, but is supported by data from studies of natural co-genetically trapped fluid and melt inclusions. The in-situ measurements of trace element concentrations in the fluid verify that aqueous fluids will change their composition upon cooling, which is in particular important for Cl free systems. The distinct differences of the in-situ results to quench data of this study as well as to data from the literature signify the im- portance of a careful fluid sampling and analysis. Therefore, the direct measurement of trace element contents in fluids equilibrated with silicate melts at elevated PT conditions represents an important development to obtain more reliable fluid−melt partition coefficients. For further improvement, both the aqueous fluid and the silicate melt need to be analyzed in-situ because partitioning data that are based on the direct measurement of the trace element content in the fluid and analysis of a quenched melt are still not completely free of quench effects. At present, all available data on element complexation in aqueous fluids in equilibrium with silicate melts at high PT are indirectly derived from partitioning data, which involves in these experiments assumptions on the species present in the fluid. However, the activities of chemical components in these partitioning experiments are not well constrained, which is required for the definition of exchange equilibria between melt and fluid species. For example, the melt-dependent variation of partition coefficient observed for Sr imply that this element can not only be complexed by Cl− as suggested previously. The data indicate a more complicated complexation of Sr in the aqueous fluid. To verify this hypothesis, the in-situ setup was also used to determine strontium complexation in fluids equilibrated with silicate melts at desired PT conditions by the application of X-ray absorption near edge structure (XANES) spectroscopy. First results show a strong effect of both fluid and melt composition on the resulting XANES spectra, which indicates different complexation environments for Sr.
Temporal gravimeter observations, used in geodesy and geophysics to study variation of the Earth’s gravity field, are influenced by local water storage changes (WSC) and – from this perspective – add noise to the gravimeter signal records. At the same time, the part of the gravity signal caused by WSC may provide substantial information for hydrologists. Water storages are the fundamental state variable of hydrological systems, but comprehensive data on total WSC are practically inaccessible and their quantification is associated with a high level of uncertainty at the field scale. This study investigates the relationship between temporal gravity measurements and WSC in order to reduce the hydrological interfering signal from temporal gravity measurements and to explore the value of temporal gravity measurements for hydrology for the superconducting gravimeter (SG) of the Geodetic Observatory Wettzell, Germany. A 4D forward model with a spatially nested discretization domain was developed to simulate and calculate the local hydrological effect on the temporal gravity observations. An intensive measurement system was installed at the Geodetic Observatory Wettzell and WSC were measured in all relevant storage components, namely groundwater, saprolite, soil, top soil and snow storage. The monitoring system comprised also a suction-controlled, weighable, monolith-filled lysimeter, allowing an all time first comparison of a lysimeter and a gravimeter. Lysimeter data were used to estimate WSC at the field scale in combination with complementary observations and a hydrological 1D model. Total local WSC were derived, uncertainties were assessed and the hydrological gravity response was calculated from the WSC. A simple conceptual hydrological model was calibrated and evaluated against records of a superconducting gravimeter, soil moisture and groundwater time series. The model was evaluated by a split sample test and validated against independently estimated WSC from the lysimeter-based approach. A simulation of the hydrological gravity effect showed that WSC of one meter height along the topography caused a gravity response of 52 µGal, whereas, generally in geodesy, on flat terrain, the same water mass variation causes a gravity change of only 42 µGal (Bouguer approximation). The radius of influence of local water storage variations can be limited to 1000 m and 50 % to 80 % of the local hydro¬logical gravity signal is generated within a radius of 50 m around the gravimeter. At the Geodetic Observatory Wettzell, WSC in the snow pack, top soil, unsaturated saprolite and fractured aquifer are all important terms of the local water budget. With the exception of snow, all storage components have gravity responses of the same order of magnitude and are therefore relevant for gravity observations. The comparison of the total hydrological gravity response to the gravity residuals obtained from the SG, showed similarities in both short-term and seasonal dynamics. However, the results demonstrated the limitations of estimating total local WSC using hydrological point measurements. The results of the lysimeter-based approach showed that gravity residuals are caused to a larger extent by local WSC than previously estimated. A comparison of the results with other methods used in the past to correct temporal gravity observations for the local hydrological influence showed that the lysimeter measurements improved the independent estimation of WSC significantly and thus provided a better way of estimating the local hydrological gravity effect. In the context of hydrological noise reduction, at sites where temporal gravity observations are used for geophysical studies beyond local hydrology, the installation of a lysimeter in combination with complementary hydrological measurements is recommended. From the hydrological view point, using gravimeter data as a calibration constraint improved the model results in comparison to hydrological point measurements. Thanks to their capacity to integrate over different storage components and a larger area, gravimeters provide generalized information on total WSC at the field scale. Due to their integrative nature, gravity data must be interpreted with great care in hydrological studies. However, gravimeters can serve as a novel measurement instrument for hydrology and the application of gravimeters especially designed to study open research questions in hydrology is recommended.
In 1915, Alfred Wegener published his hypotheses of plate tectonics that revolutionised the world for geologists. Since then, many scientists have studied the evolution of continents and especially the geologic structure of orogens: the most visible consequence of tectonic processes. Although the morphology and landscape evolution of mountain belts can be observed due to surface processes, the driving force and dynamics at lithosphere scale are less well understood despite the fact that rocks from deeper levels of orogenic belts are in places exposed at the surface. In this thesis, such formerly deeply-buried (ultra-) high-pressure rocks, in particular eclogite facies series, have been studied in order to reveal details about the formation and exhumation conditions and rates and thus provide insights into the geodynamics of the most spectacular orogenic belt in the world: the Himalaya. The specific area investigated was the Kaghan Valley in Pakistan (NW Himalaya). Following closure of the Tethyan Ocean by ca. 55-50 Ma, the northward subduction of the leading edge of India beneath the Eurasian Plate and subsequent collision initiated a long-lived process of intracrustal thrusting that continues today. The continental crust of India – granitic basement, Paleozoic and Mesozoic cover series and Permo-Triassic dykes, sills and lavas – has been buried partly to mantle depths. Today, these rocks crop out as eclogites, amphibolites and gneisses within the Higher Himalayan Crystalline between low-grade metamorphosed rocks (600-640°C/ ca. 5 kbar) of the Lesser Himalaya and Tethyan sediments. Beside tectonically driven exhumation mechanisms the channel flow model, that describes a denudation focused ductile extrusion of low viscosity material developed in the middle to lower crust beneath the Tibetan Plateau, has been postulated. To get insights into the lithospheric and crustal processes that have initiated and driven the exhumation of this (ultra-) high-pressure rocks, mineralogical, petrological and isotope-geochemical investigations have been performed. They provide insights into 1) the depths and temperatures to which these rocks were buried, 2) the pressures and temperatures the rocks have experienced during their exhumation, 3) the timing of these processes 4) and the velocity with which these rocks have been brought back to the surface. In detail, through microscopical studies, the identification of key minerals, microprobe analyses, standard geothermobarometry and modelling using an effective bulk rock composition it has been shown that published exhumation paths are incomplete. In particular, the eclogites of the northern Kaghan Valley were buried to depths of 140-100 km (36-30 kbar) at 790-640°C. Subsequently, cooling during decompression (exhumation) towards 40-35 km (17-10 kbar) and 630-580°C has been superseded by a phase of reheating to about 720-650°C at roughly the same depth before final exhumation has taken place. In the southern-most part of the study area, amphibolite facies assemblages with formation conditions similar to the deduced reheating phase indicate a juxtaposition of both areas after the eclogite facies stage and thus a stacking of Indian Plate units. Radiometric dating of zircon, titanite and rutile by U-Pb and amphibole and micas by Ar-Ar reveal peak pressure conditions at 47-48 Ma. With a maximum exhumation rate of 14 cm/a these rocks reached the crust-mantle boundary at 40-35 km within 1 Ma. Subsequent exhumation (46-41 Ma, 40-35 km) decelerated to ca. 1 mm/a at the base of the continental crust but rose again to about 2 mm/a in the period of 41-31 Ma, equivalent to 35-20 km. Apatite fission track (AFT) and (U-Th)/He ages from eclogites, amphibolites, micaschists and gneisses yielded moderate Oligocene to Miocene cooling rates of about 10°C/Ma in the high altitude northern parts of the Kaghan Valley using the mineral-pair method. AFT ages are of 24.5±3.8 to 15.6±2.1 Ma whereas apatite (U-Th)/He analyses yielded ages between 21.0±0.6 and 5.3±0.2 Ma. The southern-most part of the Valley is dominated by younger late Miocene to Pliocene apatite fission track ages of 7.6±2.1 and 4.0±0.5 Ma that support earlier tectonically and petrologically findings of a juxtaposition and stack of Indian Plate units. As this nappe is tectonically lowermost, a later distinct exhumation and uplift driven by thrusting along the Main Boundary Thrust is inferred. A multi-stage exhumation path is evident from petrological, isotope-geochemical and low temperature thermochronology investigations. Buoyancy driven exhumation caused an initial rapid exhumation: exhumation as fast as recent normal plate movements (ca. 10 cm/a). As the exhuming units reached the crust-mantle boundary the process slowed down due to changes in buoyancy. Most likely, this exhumation pause has initiated the reheating event that is petrologically evident (e.g. glaucophane rimmed by hornblende, ilmenite overgrowth of rutile). Late stage processes involved widespread thrusting and folding with accompanied regional greenschist facies metamorphism, whereby contemporaneous thrusting on the Batal Thrust (seen by some authors equivalent to the MCT) and back sliding of the Kohistan Arc along the inverse reactivated Main Mantle Thrust caused final exposure of these rocks. Similar circumstances have been seen at Tso Morari, Ladakh, India, 200 km further east where comparable rock assemblages occur. In conclusion, as exhumation was already done well before the initiation of the monsoonal system, climate dependent effects (erosion) appear negligible in comparison to far-field tectonic effects.
Large-scale volcanic deformation recently detected by radar interferometry (InSAR) provides new information and thus new scientific challenges for understanding volcano-tectonic activity and magmatic systems. The destabilization of such a system at depth noticeably affects the surrounding environment through magma injection, ground displacement and volcanic eruptions. To determine the spatiotemporal evolution of the Lazufre volcanic area located in the central Andes, we combined short-term ground displacement acquired by InSAR with long-term geological observations. Ground displacement was first detected using InSAR in 1997. By 2008, this displacement affected 1800 km2 of the surface, an area comparable in size to the deformation observed at caldera systems. The original displacement was followed in 2000 by a second, small-scale, neighbouring deformation located on the Lastarria volcano. We performed a detailed analysis of the volcanic structures at Lazufre and found relationships with the volcano deformations observed with InSAR. We infer that these observations are both likely to be the surface expression of a long-lived magmatic system evolving at depth. It is not yet clear whether Lazufre may trigger larger unrest or volcanic eruptions; however, the second deformation detected at Lastarria and the clear increase of the large-scale deformation rate make this an area of particular interest for closer continuous monitoring.
Development of techniques for earthquake microzonation studies in different urban environment
(2010)
The proliferation of megacities in many developing countries, and their location in areas where they are exposed to a high risk from large earthquakes, coupled with a lack of preparation, demonstrates the requirement for improved capabilities in hazard assessment, as well as the rapid adjustment and development of land-use planning. In particular, within the context of seismic hazard assessment, the evaluation of local site effects and their influence on the spatial distribution of ground shaking generated by an earthquake plays an important role. It follows that the carrying out of earthquake microzonation studies, which aim at identify areas within the urban environment that are expected to respond in a similar way to a seismic event, are essential to the reliable risk assessment of large urban areas. Considering the rate at which many large towns in developing countries that are prone to large earthquakes are growing, their seismic microzonation has become mandatory. Such activities are challenging and techniques suitable for identifying site effects within such contexts are needed. In this dissertation, I develop techniques for investigating large-scale urban environments that aim at being non-invasive, cost-effective and quickly deployable. These peculiarities allow one to investigate large areas over a relative short time frame, with a spatial sampling resolution sufficient to provide reliable microzonation. Although there is a negative trade-off between the completeness of available information and extent of the investigated area, I attempt to mitigate this limitation by combining two, what I term layers, of information: in the first layer, the site effects at a few calibration points are well constrained by analyzing earthquake data or using other geophysical information (e.g., shear-wave velocity profiles); in the second layer, the site effects over a larger areal coverage are estimated by means of single-station noise measurements. The microzonation is performed in terms of problem-dependent quantities, by considering a proxy suitable to link information from the first layer to the second one. In order to define the microzonation approach proposed in this work, different methods for estimating site effects have been combined and tested in Potenza (Italy), where a considerable amount of data was available. In particular, the horizontal-to-vertical spectral ratio computed for seismic noise recorded at different sites has been used as a proxy to combine the two levels of information together and to create a microzonation map in terms of spectral intensity ratio (SIR). In the next step, I applied this two-layer approach to Istanbul (Turkey) and Bishkek (Kyrgyzstan). A similar hybrid approach, i.e., combining earthquake and noise data, has been used for the microzonation of these two different urban environments. For both cities, after having calibrated the fundamental frequencies of resonance estimated from seismic noise with those obtained by analysing earthquakes (first layer), a fundamental frequency map has been computed using the noise measurements carried out within the town (second layer). By applying this new approach, maps of the fundamental frequency of resonance for Istanbul and Bishkek have been published for the first time. In parallel, a microzonation map in terms of SIR has been incorporated into a risk scenario for the Potenza test site by means of a dedicated regression between spectral intensity (SI) and macroseismic intensity (EMS). The scenario study confirms the importance of site effects within the risk chain. In fact, their introduction into the scenario led to an increase of about 50% in estimates of the number of buildings that would be partially or totally collapsed. Last, but not least, considering that the approach developed and applied in this work is based on measurements of seismic noise, their reliability has been assessed. A theoretical model describing the self-noise curves of different instruments usually adopted in microzonation studies (e.g., those used in Potenza, Istanbul and Bishkek) have been considered and compared with empirical data recorded in Cologne (Germany) and Gubbio (Italy). The results show that, depending on the geological and environmental conditions, the instrumental noise could severely bias the results obtained by recording and analysing ambient noise. Therefore, in this work I also provide some guidelines for measuring seismic noise.
The Antarctic plays an important role in the global climate system. On the one hand, the Antarctic Ice Sheet is the largest freshwater reservoir on Earth. On the other hand, a major proportion of the global bottom-water formation takes place in Antarctic shelf regions, forcing the global thermohaline circulation. The main goal of this dissertation is to provide new insights into the dynamics and stability of the EAIS during the Quaternary. Additionally, variations in the activity of bottom-water formation and their causes are investigated. The dissertation is a German contribution to the International Polar Year 2007/ 2008 and was funded by the ‘Deutsche Forschungsgesellschaft’ (DFG) within the scope of priority program 1158 ‘Antarctic research with comparative studies in Arctic ice regions’. During RV Polarstern expedition ANT-XXIII/9, glaciomarine sediments were recovered from the Prydz Bay-Kerguelen region. Prydz Bay is a key region for the study of East EAIS dynamics, as 16% of the EAIS are drained through the Lambert Glacier into the bay. Thereby, the glacier transports sediment into Prydz Bay which is then further distributed by calving icebergs or by current transport. The scientific approach of this dissertation is the reconstruction of past glaciomarine environments to infer on the response of the Lambert Glacier-Amery Ice Shelf system to climate shifts during the Quaternary. To characterize the depositional setting, sedimentological methods are used and statistical analyses are applied. Mineralogical and (bio)geochemical methods provide a means to reconstruct sediment provenances and to provide evidence on changes in the primary production in the surface water column. Age-depth models were constructed based on palaeomagnetic and palaeointensity measurements, diatom stratigraphy and radiocarbon dating. Sea-bed surface sediments in the investigation area show distinct variations in terms of their clay minerals and heavy-mineral assemblages. Considerable differences in the mineralogical composition of surface sediments are determined on the continental shelf. Clay minerals as well as heavy minerals provide useful parameters to differentiate between sediments which originated from erosion of crystalline rocks and sediments originating from Permo-Triassic deposits. Consequently, mineralogical parameters can be used to reconstruct the provenance of current-transported and ice-rafted material. The investigated sediment cores cover the time intervals of the last 1.4 Ma (continental slope) and the last 12.8 cal. ka BP (MacRobertson shelf). The sediment deposits were mainly influenced by glacial and oceanographic processes and further by biological activity (continental shelf), meltwater input and possibly gravitational transport. Sediments from the continental slope document two major deglacial events: the first deglaciation is associated with the mid-Pleistocene warming recognized around the Antarctic. In Prydz Bay, the Lambert Glacier-Amery Ice Shelf retreated far to the south and high biogenic productivity commenced or biogenic remains were better preserved due to increased sedimentation rates. Thereafter, stable glacial conditions continued until 400 - 500 ka BP. Calving of icebergs was restricted to the western part of the Lambert Glacier. The deeper bathymetry in this area allows for floating ice shelf even during times of decreased sea-level. Between 400 - 500 ka BP and the last interglacial (marine isotope stage 5) the glacier was more dynamic. During or shortly after the last interglacial the LAIS retreated again due to sea-level rise of 6 - 9 m. Both deglacial events correlate with a reduction in the thickness of ice masses in the Prince Charles Mountains. It indicates that a disintegration of the Amery Ice Shelf possibly led to increased drainage of ice masses from the Prydz Bay hinterland. A new end-member modelling algorithm was successfully applied on sediments from the MacRobertson shelf used to unmix the sand grain size fractions sorted by current activity and ice transport, respectively. Ice retreat on MacRobertson Shelf commenced 12.8 cal. ka BP and ended around 5.5 cal. ka BP. During the Holocene, strong fluctuations of the bottomwater activity were observed, probably related to variations of sea-ice formation in the Cape Darnley polynya. Increased activity of bottom-water flow was reconstructed at transitions from warm to cool conditions, whereas bottom-water activity receded during the mid- Holocene climate optimum. It can be concluded that the Lambert Glacier-Amery Ice Shelf system was relatively stable in terms of climate variations during the Quaternary. In contrast, bottom-water formation due to polynya activity was very sensitive to changes in atmospheric forcing and should gain more attention in future research.
Situated in an active tectonic region, Santiago de Chile, the country´s capital with more than six million inhabitants, faces tremendous earthquake hazard. Macroseismic data for the 1985 Valparaiso and the 2010 Maule events show large variations in the distribution of damage to buildings within short distances indicating strong influence of local sediments and the shape of the sediment-bedrock interface on ground motion. Therefore, a temporary seismic network was installed in the urban area for recording earthquake activity, and a study was carried out aiming to estimate site amplification derived from earthquake data and ambient noise. The analysis of earthquake data shows significant dependence on the local geological structure with regards to amplitude and duration. Moreover, the analysis of noise spectral ratios shows that they can provide a lower bound in amplitude for site amplification and, since no variability in terms of time and amplitude is observed, that it is possible to map the fundamental resonance frequency of the soil for a 26 km x 12 km area in the northern part of the Santiago de Chile basin. By inverting the noise spectral rations, local shear wave velocity profiles could be derived under the constraint of the thickness of the sedimentary cover which had previously been determined by gravimetric measurements. The resulting 3D model was derived by interpolation between the single shear wave velocity profiles and shows locally good agreement with the few existing velocity profile data, but allows the entire area, as well as deeper parts of the basin, to be represented in greater detail. The wealth of available data allowed further to check if any correlation between the shear wave velocity in the uppermost 30 m (vs30) and the slope of topography, a new technique recently proposed by Wald and Allen (2007), exists on a local scale. While one lithology might provide a greater scatter in the velocity values for the investigated area, almost no correlation between topographic gradient and calculated vs30 exists, whereas a better link is found between vs30 and the local geology. When comparing the vs30 distribution with the MSK intensities for the 1985 Valparaiso event it becomes clear that high intensities are found where the expected vs30 values are low and over a thick sedimentary cover. Although this evidence cannot be generalized for all possible earthquakes, it indicates the influence of site effects modifying the ground motion when earthquakes occur well outside of the Santiago basin. Using the attained knowledge on the basin characteristics, simulations of strong ground motion within the Santiago Metropolitan area were carried out by means of the spectral element technique. The simulation of a regional event, which has also been recorded by a dense network installed in the city of Santiago for recording aftershock activity following the 27 February 2010 Maule earthquake, shows that the model is capable to realistically calculate ground motion in terms of amplitude, duration, and frequency and, moreover, that the surface topography and the shape of the sediment bedrock interface strongly modify ground motion in the Santiago basin. An examination on the dependency of ground motion on the hypocenter location for a hypothetical event occurring along the active San Ramón fault, which is crossing the eastern outskirts of the city, shows that the unfavorable interaction between fault rupture, radiation mechanism, and complex geological conditions in the near-field may give rise to large values of peak ground velocity and therefore considerably increase the level of seismic risk for Santiago de Chile.
Recent large earthquakes put in evidence the need of improving and developing robust and rapid procedures to properly calculate the magnitude of an earthquake in a short time after its occurrence. The most famous example is the 26 December 2004 Sumatra earthquake, when the limitations of the standard procedures adopted at that time by many agencies failed to provide accurate magnitude estimates of this exceptional event in time to launch early enough warnings and appropriate response. Being related to the radiated seismic energy ES, the energy magnitude ME is a good estimator of the high frequency content radiated by the source which goes into the seismic waves. However, a procedure to rapidly determine ME (that is to say, within 15 minutes after the earthquake occurrence) was required. Here it is presented a procedure able to provide in a rapid way the energy magnitude ME for shallow earthquakes by analyzing teleseismic P‑waves in the distance range 20-98. To account for the energy loss experienced by the seismic waves from the source to the receivers, spectral amplitude decay functions obtained from numerical simulations of Greens functions based on the average global model AK135Q are used. The proposed method has been tested using a large global dataset (~1000 earthquakes) and the obtained rapid ME estimations have been compared to other magnitude scales from different agencies. Special emphasis is given to the comparison with the moment magnitude MW, since the latter is very popular and extensively used in common seismological practice. However, it is shown that MW alone provide only limited information about the seismic source properties, and that disaster management organizations would benefit from a combined use of MW and ME in the prompt evaluation of an earthquake’s tsunami and shaking potential. In addition, since the proposed approach for ME is intended to work without knowledge of the fault plane geometry (often available only hours after an earthquake occurrence), the suitability of this method is discussed by grouping the analyzed earthquakes according to their type of mechanism (strike-slip, normal faulting, thrust faulting, etc.). No clear trend is found from the rapid ME estimates with the different fault plane solution groups. This is not the case for the ME routinely determined by the U.S. Geological Survey, which uses specific radiation pattern corrections. Further studies are needed to verify the effect of such corrections on ME estimates. Finally, exploiting the redundancy of the information provided by the analyzed dataset, the components of variance on the single station ME estimates are investigated. The largest component of variance is due to the intra-station (record-to-record) error, although the inter-station (station-to-station) error is not negligible and is of several magnitude units for some stations. Moreover, it is shown that the intra-station component of error is not random but depends on the travel path from a source area to a given station. Consequently, empirical corrections may be used to account for the heterogeneities of the real Earth not considered in the theoretical calculations of the spectral amplitude decay functions used to correct the recorded data for the propagation effects.
The seismically active Alborz mountains of northern Iran are an integral part of the Arabia-Eurasia collision. Linked strike-slip and thrust/reverse-fault systems in this mountain belt are characterized by slow loading rates, and large earthquakes are highly disparate in space and time. Similar to other intracontinental deformation zones such a pattern of tectonic activity is still insufficiently understood, because recurrence intervals between seismic events may be on the order of thousands of years, and are thus beyond the resolution of short term measurements based on GPS or instrumentally recorded seismicity. This study bridges the gap of deformation processes on different time scales. In particular, my investigation focuses on deformation on the Quaternary time scale, beyond present-day deformation rates, and it uses present-day and paleotectonic characteristics to model fault behavior. The study includes data based on structural and geomorphic mapping, faultkinematic analysis, DEM-based morphometry, and numerical fault-interaction modeling. In order to better understand the long- to short term behavior of such complex fault systems, I used geomorphic surfaces as strain markers and dated fluvial and alluvial surfaces using terrestrial cosmogenic nuclides (TCN, 10Be, 26Al, 36Cl) and optically stimulated luminescence (OSL). My investigation focuses on the seismically active Mosha-Fasham fault (MFF) and the seismically virtually inactive North Tehran Thrust (NTT), adjacent to the Tehran metropolitan area. Fault-kinematic data reveal an early mechanical linkage of the NTT and MFF during an earlier dextral transpressional stage, when the shortening direction was oriented northwest. This regime was superseded by Pliocene to Recent NE-oriented shortening, which caused thrusting and sinistral strike-slip faulting. In the course of this kinematic changeover, the NTT and MFF were reactivated and incorporated into a nascent transpressional duplex, which has significantly affected landscape evolution in this part of the range. Two of three distinctive features which characterize topography and relief in the study area can be directly related to their location inside the duplex array and are thus linked to interaction between eastern MFF and NTT, and between western MFF and Taleghan fault, respectively. To account for inferred inherited topography from the previous dextral-transpression regime, a new concept of tectonic landscape characterization has been used. Accordingly, I define simple landscapes as those environments, which have developed during the influence of a sustained tectonic regime. In contrast, composite landscapes contain topographic elements inherited from previous tectonic conditions that are inconsistent with the regional present-day stress field and kinematic style. Using numerical fault-interaction modeling with different tectonic boundary conditions, I calculated synoptic snapshots of artificial topography to compare it with the real topographic metrics. However, in the Alborz mountains, E-W faults are favorably oriented to accommodate the entire range of NW- to NE-directed compression. These faults show the highest total displacement which might indicate sustained faulting under changing boundary conditions. In contrast to the fault system within and at the flanks of the Alborz mountains, Quaternary deformation in the adjacent Tehran plain is characterized by oblique motion and thrust and strike-slip fault systems. In this morphotectonic province fault-propagation folding along major faults, limited strike-slip motion, and en-échelon arrays of second-order upper plate thrusts are typical. While the Tehran plain is characterized by young deformation phenomena, the majority of faulting took place in the early stages of the Quaternary and during late Pliocene time. TCN-dating, which was performed for the first time on geomorphic surfaces in the Tehran plain, revealed that the oldest two phases of alluviation (units A and B) must be older than late Pleistocene. While urban development in Tehran increasingly covers and obliterates the active fault traces, the present-day kinematic style, the vestiges of formerly undeformed Quaternary landforms, and paleo earthquake indicators from the last millennia attest to the threat that these faults and their related structures pose for the megacity.
In the high mountains of Asia, glaciers cover an area of approximately 115,000 km² and constitute one of the largest continental ice accumulations outside Greenland and Antarctica. Their sensitivity to climate change makes them valuable palaeoclimate archives, but also vulnerable to current and predicted Global Warming. This is a pressing problem as snow and glacial melt waters are important sources for agriculture and power supply of densely populated regions in south, east, and central Asia. Successful prediction of the glacial response to climate change in Asia and mitigation of the socioeconomic impacts requires profound knowledge of the climatic controls and the dynamics of Asian glaciers. However, due to their remoteness and difficult accessibility, ground-based studies are rare, as well as temporally and spatially limited. We therefore lack basic information on the vast majority of these glaciers. In this thesis, I employ different methods to assess the dynamics of Asian glaciers on multiple time scales. First, I tested a method for precise satellite-based measurement of glacier-surface velocities and conducted a comprehensive and regional survey of glacial flow and terminus dynamics of Asian glaciers between 2000 and 2008. This novel and unprecedented dataset provides unique insights into the contrasting topographic and climatic controls of glacial flow velocities across the Asian highlands. The data document disparate recent glacial behavior between the Karakoram and the Himalaya, which I attribute to the competing influence of the mid-latitude westerlies during winter and the Indian monsoon during summer. Second, I tested whether such climate-related longitudinal differences in glacial behavior also prevail on longer time scales, and potentially account for observed regionally asynchronous glacial advances. I used cosmogenic nuclide surface exposure dating of erratic boulders on moraines to obtain a glacial chronology for the upper Tons Valley, situated in the headwaters of the Ganges River. This area is located in the transition zone from monsoonal to westerly moisture supply and therefore ideal to examine the influence of these two atmospheric circulation regimes on glacial advances. The new glacial chronology documents multiple glacial oscillations during the last glacial termination and during the Holocene, suggesting largely synchronous glacial changes in the western Himalayan region that are related to gradual glacial-interglacial temperature oscillations with superimposed monsoonal precipitation changes of higher frequency. In a third step, I combine results from short-term satellite-based climate records and surface velocity-derived ice-flux estimates, with topographic analyses to deduce the erosional impact of glaciations on long-term landscape evolution in the Himalayan-Tibetan realm. The results provide evidence for the long-term effects of pronounced east-west differences in glaciation and glacial erosion, depending on climatic and topographic factors. Contrary to common belief the data suggest that monsoonal climate in the central Himalaya weakens glacial erosion at high elevations, helping to maintain a steep southern orographic barrier that protects the Tibetan Plateau from lateral destruction. The results of this thesis highlight how climatic and topographic gradients across the high mountains of Asia affect glacier dynamics on time scales ranging from 10^0 to 10^6 years. Glacial response times to climate changes are tightly linked to properties such as debris cover and surface slope, which are controlled by the topographic setting, and which need to be taken into account when reconstructing mountainous palaeoclimate from glacial histories or assessing the future evolution of Asian glaciers. Conversely, the regional topographic differences of glacial landscapes in Asia are partly controlled by climatic gradients and the long-term influence of glaciers on the topographic evolution of the orogenic system.
Flood design necessitates discharge estimates for large recurrence intervals. However, in a flood frequency analysis, the uncertainty of discharge estimates increases with higher recurrence intervals, particularly due to the small number of available flood data. Furthermore, traditional distribution functions increase unlimitedly without consideration of an upper bound discharge. Hence, additional information needs to be considered which is representative for high recurrence intervals. Envelope curves which bound the maximum observed discharges of a region are an adequate regionalisation method to provide additional spatial information for the upper tail of a distribution function. Probabilistic regional envelope curves (PRECs) are an extension of the traditional empirical envelope curve approach, in which a recurrence interval is estimated for a regional envelope curve (REC). The REC is constructed for a homogeneous pooling group of sites. The estimation of this recurrence interval is based on the effective sample years of data considering the intersite dependence among all sites of the pooling group. The core idea of this thesis was an improvement of discharge estimates for high recurrence intervals by integrating empirical and probabilistic regional envelope curves into the flood frequency analysis. Therefore, the method of probabilistic regional envelope curves was investigated in detail. Several pooling groups were derived by modifying candidate sets of catchment descriptors and settings of two different pooling methods. These were used to construct PRECs. A sensitivity analysis shows the variability of discharges and the recurrence intervals for a given site due to the different assumptions. The unit flood of record which governs the intercept of PREC was determined as the most influential aspect. By separating the catchments into nested and unnested pairs, the calculation algorithm for the effective sample years of data was refined. In this way, the estimation of the recurrence intervals was improved, and therefore the use of different parameter sets for nested and unnested pairs of catchments is recommended. In the second part of this thesis, PRECs were introduced into a distribution function. Whereas in the traditional approach only discharge values are used, PRECs provide a discharge and its corresponding recurrence interval. Hence, a novel approach was developed, which allows a combination of the PREC results with the traditional systematic flood series while taking the PREC recurrence interval into consideration. An adequate mixed bounded distribution function was presented, which in addition to the PREC results also uses an upper bound discharge derived by an empirical envelope curve. By doing so, two types of additional information which are representative for the upper tail of a distribution function were included in the flood frequency analysis. The integration of both types of additional information leads to an improved discharge estimation for recurrence intervals between 100 and 1000 years.
Based on technological advances made within the past decades, ground-penetrating radar (GPR) has become a well-established, non-destructive subsurface imaging technique. Catalyzed by recent demands for high-resolution, near-surface imaging (e.g., the detection of unexploded ordnances and subsurface utilities, or hydrological investigations), the quality of today's GPR-based, near-surface images has significantly matured. At the same time, the analysis of oil and gas related reflection seismic data sets has experienced significant advances. Considering the sensitivity of attribute analysis with respect to data positioning in general, and multi-trace attributes in particular, trace positioning accuracy is of major importance for the success of attribute-based analysis flows. Therefore, to study the feasibility of GPR-based attribute analyses, I first developed and evaluated a real-time GPR surveying setup based on a modern tracking total station (TTS). The combination of current GPR systems capability of fusing global positioning system (GPS) and geophysical data in real-time, the ability of modern TTS systems to generate a GPS-like positional output and wireless data transmission using radio modems results in a flexible and robust surveying setup. To elaborate the feasibility of this setup, I studied the major limitations of such an approach: system cross-talk and data delays known as latencies. Experimental studies have shown that when a minimal distance of ~5 m between the GPR and the TTS system is considered, the signal-to-noise ratio of the acquired GPR data using radio communication equals the one without radio communication. To address the limitations imposed by system latencies, inherent to all real-time data fusion approaches, I developed a novel correction (calibration) strategy to assess the gross system latency and to correct for it. This resulted in the centimeter trace accuracy required by high-frequency and/or three-dimensional (3D) GPR surveys. Having introduced this flexible high-precision surveying setup, I successfully demonstrated the application of attribute-based processing to GPR specific problems, which may differ significantly from the geological ones typically addressed by the oil and gas industry using seismic data. In this thesis, I concentrated on archaeological and subsurface utility problems, as they represent typical near-surface geophysical targets. Enhancing 3D archaeological GPR data sets using a dip-steered filtering approach, followed by calculation of coherency and similarity, allowed me to conduct subsurface interpretations far beyond those obtained by classical time-slice analyses. I could show that the incorporation of additional data sets (magnetic and topographic) and attributes derived from these data sets can further improve the interpretation. In a case study, such an approach revealed the complementary nature of the individual data sets and, for example, allowed conclusions about the source location of magnetic anomalies by concurrently analyzing GPR time/depth slices to be made. In addition to archaeological targets, subsurface utility detection and characterization is a steadily growing field of application for GPR. I developed a novel attribute called depolarization. Incorporation of geometrical and physical feature characteristics into the depolarization attribute allowed me to display the observed polarization phenomena efficiently. Geometrical enhancement makes use of an improved symmetry extraction algorithm based on Laplacian high-boosting, followed by a phase-based symmetry calculation using a two-dimensional (2D) log-Gabor filterbank decomposition of the data volume. To extract the physical information from the dual-component data set, I employed a sliding-window principle component analysis. The combination of the geometrically derived feature angle and the physically derived polarization angle allowed me to enhance the polarization characteristics of subsurface features. Ground-truth information obtained by excavations confirmed this interpretation. In the future, inclusion of cross-polarized antennae configurations into the processing scheme may further improve the quality of the depolarization attribute. In addition to polarization phenomena, the time-dependent frequency evolution of GPR signals might hold further information on the subsurface architecture and/or material properties. High-resolution, sparsity promoting decomposition approaches have recently had a significant impact on the image and signal processing community. In this thesis, I introduced a modified tree-based matching pursuit approach. Based on different synthetic examples, I showed that the modified tree-based pursuit approach clearly outperforms other commonly used time-frequency decomposition approaches with respect to both time and frequency resolutions. Apart from the investigation of tuning effects in GPR data, I also demonstrated the potential of high-resolution sparse decompositions for advanced data processing. Frequency modulation of individual atoms themselves allows to efficiently correct frequency attenuation effects and improve resolution based on shifting the average frequency level. GPR-based attribute analysis is still in its infancy. Considering the growing widespread realization of 3D GPR studies there will certainly be an increasing demand towards improved subsurface interpretations in the future. Similar to the assessment of quantitative reservoir properties through the combination of 3D seismic attribute volumes with sparse well-log information, parameter estimation in a combined manner represents another step in emphasizing the potential of attribute-driven GPR data analyses.
Indonesia is one of the countries most prone to natural hazards. Complex interaction of several tectonic plates with high relative velocities leads to approximately two earthquakes with magnitude Mw>7 every year, being more than 15% of the events worldwide. Earthquakes with magnitude above 9 happen far more infrequently, but with catastrophic effects. The most severe consequences thereby arise from tsunamis triggered by these subduction-related earthquakes, as the Sumatra-Andaman event in 2004 showed. In order to enable efficient tsunami early warning, which includes the estimation of wave heights and arrival times, it is necessary to combine different types of real-time sensor data with numerical models of earthquake sources and tsunami propagation. This thesis was created as a result of the GITEWS project (German Indonesian Tsunami Early Warning System). It is based on five research papers and manuscripts. Main project-related task was the development of a database containing realistic earthquake scenarios for the Sunda Arc. This database provides initial conditions for tsunami propagation modeling used by the simulation system at the early warning center. An accurate discretization of the subduction geometry, consisting of 25x150 subfaults was constructed based on seismic data. Green’s functions, representing the deformational response to unit dip- and strike slip at the subfaults, were computed using a layered half-space approach. Different scaling relations for earthquake dimensions and slip distribution were implemented. Another project-related task was the further development of the ‘GPS-shield’ concept. It consists of a constellation of near field GPS-receivers, which are shown to be very valuable for tsunami early warning. The major part of this thesis is related to the geophysical interpretation of GPS data. Coseismic surface displacements caused by the 2004 Sumatra earthquake are inverted for slip at the fault. The effect of different Earth layer models is tested, favoring continental structure. The possibility of splay faulting is considered and shown to be a secondary order effect in respect to tsunamigenity for this event. Tsunami models based on source inversions are compared to satellite radar altimetry observations. Postseismic GPS time series are used to test a wide parameter range of uni- and biviscous rheological models of the asthenosphere. Steady-state Maxwell rheology is shown to be incompatible with near-field GPS data, unless large afterslip, amounting to more than 10% of the coseismic moment is assumed. In contrast, transient Burgers rheology is in agreement with data without the need for large aseismic afterslip. Comparison to postseismic geoid observation by the GRACE satellites reveals that even with afterslip, the model implementing Maxwell rheology results in amplitudes being too small, and thus supports a biviscous asthenosphere. A simple approach based on the assumption of quasi-static deformation propagation is introduced and proposed for inversion of coseismic near-field GPS time series. Application of this approach to observations from the 2004 Sumatra event fails to quantitatively reconstruct the rupture propagation, since a priori conditions are not fulfilled in this case. However, synthetic tests reveal the feasibility of such an approach for fast estimation of rupturing properties.
Rainfall, snow-, and glacial melt throughout the Himalaya control river discharge, which is vital for maintaining agriculture, drinking water and hydropower generation. However, the spatiotemporal contribution of these discharge components to Himalayan rivers is not well understood, mainly because of the scarcity of ground-based observations. Consequently, there is also little known about the triggers and sources of peak sediment flux events, which account for extensive hydropower reservoir filling and turbine abrasion. We therefore lack basic information on the distribution of water resources and controls of erosion processes. In this thesis, I employ various methods to assess and quantify general characteristics of and links between precipitation, river discharge, and sediment flux in the Sutlej Valley. First, I analyze daily precipitation data (1998-2007) from 80 weather stations in the western Himalaya, to decipher the distribution of rain- and snowfall. Rainfall magnitude frequency analyses indicate that 40% of the summer rainfall budget is attributed to monsoonal rainstorms, which show higher variability in the orogenic interior than in frontal regions. Combined analysis of rainstorms and sediment flux data of a major Sutlej River tributary indicate that monsoonal rainfall has a first order control on erosion processes in the orogenic interior, despite the dominance of snowfall in this region. Second, I examine the contribution of rainfall, snow and glacial melt to river discharge in the Sutlej Valley (s55,000 km2), based on a distributed hydrological model, which covers the period 2000-2008. To achieve high spatial and daily resolution despite limited ground-based observations the hydrological model is forced by daily remote sensing data, which I adjusted and calibrated with ground station data. The calibration shows that the Tropical Rainfall Measuring Mission (TRMM) 3B42 rainfall product systematically overestimates rainfall in semi-arid and arid regions, increasing with aridity. The model results indicate that snowmelt-derived discharge (74%) is most important during the pre-monsoon season (April to June) whereas rainfall (56%) and glacial melt (17%) dominate the monsoon season (July-September). Therefore, climate change most likely causes a reduction in river discharge during the pre-monsoon season, which especially affects the orogenic interior. Third, I investigate the controls on suspended sediment flux in different parts of the Sutlej catchments, based on daily gauging data from the past decade. In conjunction with meteorological data, earthquake records, and rock strength measurements I find that rainstorms are the most frequent trigger of high-discharge events with peaks in suspended sediment concentrations (SSC) that account for the bulk of the suspended sediment flux. The suspended sediment flux increases downstream, mainly due to increases in runoff. Pronounced erosion along the Himalayan Front occurs throughout the monsoon season, whereas efficient erosion of the orogenic interior is confined to single extreme events. The results of this thesis highlight the importance of snow and glacially derived melt waters in the western Himalaya, where extensive regions receive only limited amounts of monsoonal rainfall. These regions are therefore particularly susceptible to global warming with major implications on the hydrological cycle. However, the sediment discharge data show that infrequent monsoonal rainstorms that pass the orographic barrier of the Higher Himalaya are still the primary trigger of the highest-impact erosion events, despite being subordinate to snow and glacially–derived discharge. These findings may help to predict peak sediment flux events and could underpin the strategic development of preventative measures for hydropower infrastructures.
The East African Plateau provides a spectacular example of geodynamic plateau uplift, active continental rifting, and associated climatic forcing. It is an integral part of the East African Rift System and has an average elevation of approximately 1,000 m. Its location coincides with a negative Bouguer gravity anomaly with a semi-circular shape, closely related to a mantle plume, which influences the Cenozoic crustal development since its impingement in Eocene-Oligocene time. The uplift of the East African Plateau, preceding volcanism, and rifting formed an important orographic barrier and tectonically controlled environment, which is profoundly influenced by climate driven processes. Its location within the equatorial realm supports recently proposed hypotheses, that topographic changes in this region must be considered as the dominant forcing factor influencing atmospheric circulation patterns and rainfall distribution. The uplift of this region has therefore often been associated with fundamental climatic and environmental changes in East Africa and adjacent regions. While the far-reaching influence of the plateau uplift is widely accepted, the timing and the magnitude of the uplift are ambiguous and are still subject to ongoing discussion. This dilemma stems from the lack of datable, geomorphically meaningful reference horizons that could record surface uplift. In order to quantify the amount of plateau uplift and to find evidence for the existence of significant relief along the East African Plateau prior to rifting, I analyzed and modeled one of the longest terrestrial lava flows; the 300-km-long Yatta phonolite flow in Kenya. This lava flow is 13.5 Ma old and originated in the region that now corresponds to the eastern rift shoulders. The phonolitic flow utilized an old riverbed that once drained the eastern flank of the plateau. Due to differential erosion this lava flow now forms a positive relief above the parallel-flowing Athi River, which is mimicking the course of the paleo-river. My approach is a lava-flow modeling, based on an improved composition and temperature dependent method to parameterize the flow of an arbitrary lava in a rectangular-shaped channel. The essential growth pattern is described by a one-dimensional model, in which Newtonian rheological flow advance is governed by the development of viscosity and/or velocity in the internal parts of the lava-flow front. Comparing assessments of different magma compositions reveal that length-dominated, channelized lava flows are characterized by high effusion rates, rapid emplacement under approximately isothermal conditions, and laminar flow. By integrating the Yatta lava flow dimensions and the covered paleo-topography (slope angle) into the model, I was able to determine the pre-rift topography of the East African Plateau. The modeling results yield a pre-rift slope of at least 0.2°, suggesting that the lava flow must have originated at a minimum elevation of 1,400 m. Hence, high topography in the region of the present-day Kenya Rift must have existed by at least 13.5 Ma. This inferred mid-Miocene uplift coincides with the two-step expansion of grasslands, as well as important radiation and speciation events in tropical Africa. Accordingly, the combination of my results regarding the Yatta lava flow emplacement history, its location, and its morphologic character, validates it as a suitable “paleo-tiltmeter” and has thus to be considered as an important topographic and volcanic feature for the topographic evolution in East Africa.
Soil moisture is a key state variable that controls runoff formation, infiltration and partitioning of radiation into latent and sensible heat. However, the experimental characterisation of near surface soil moisture patterns and their controls on runoff formation remains a challenge. This subject was one aspect of the BMBF-funded OPAQUE project (operational discharge and flooding predictions in head catchments). As part of that project the focus of this dissertation is on: (1) testing the methodology and feasibility of the Spatial TDR technology in producing soil moisture profiles along TDR probes, including an inversion technique of the recorded signal in heterogeneous field soils, (2) the analysis of spatial variability and temporal dynamics of soil moisture at the field scale including field experiments and hydrological modelling, (3) the application of models of different complexity for understanding soil moisture dynamics and its importance for runoff generation as well as for improving the prediction of runoff volumes. To fulfil objective 1, several laboratory experiments were conducted to understand the influence of probe rod geometry and heterogeneities in the sampling volume under different wetness conditions. This includes a detailed analysis on how these error sources affect retrieval of soil moisture profiles in soils. Concerning objective 2 a sampling strategy of two TDR clusters installed in the head water of the Wilde Weißeritz catchment (Eastern Ore Mountains, Germany) was used to investigate how well “the catchment state” can be characterised by means of distributed soil moisture data observed at the field scale. A grassland site and a forested site both located on gentle slopes were instrumented with two Spatial TDR clusters that consist of up to 39 TDR probes. Process understanding was gained by modelling the interaction of evapotranspiration and soil moisture with the hydrological process model CATFLOW. A field scale irrigation experiment was carried out to investigate near subsurface processes at the hillslope scale. The interactions of soil moisture and runoff formation were analysed using discharge data from three nested catchments: the Becherbach with a size of 2 km², the Rehefeld catchment (17 km²) and the superordinate Ammelsdorf catchment (49 km²). Statistical analyses including observations of pre-event runoff, soil moisture and different rainfall characteristics were employed to predict stream flow volume. On the different scales a strong correlation between the average soil moisture and the runoff coefficients of rainfall-runoff events could be found, which almost explains equivalent variability as the pre-event runoff. Furthermore, there was a strong correlation between surface soil moisture and subsurface wetness with a hysteretic behaviour between runoff soil moisture. To fulfil objective 3 these findings were used in a generalised linear model (GLM) analysis which combines state variables describing the catchments antecedent wetness and variables describing the meteorological forcing in order to predict event runoff coefficients. GLM results were compared to simulations with the catchment model WaSiM ETH. Hereby were the model results of the GLMs always better than the simulations with WaSiM ETH. The GLM analysis indicated that the proposed sampling strategy of clustering TDR probes in typical functional units is a promising technique to explore soil moisture controls on runoff generation and can be an important link between the scales. Long term monitoring of such sites could yield valuable information for flood warning and forecasting by identifying critical soil moisture conditions for the former and providing a better representation of the initial moisture conditions for the latter.
The lakes of the East African Rift System (EARS) have been intensively studied to better understand the influence of climate change on hydrological systems. The exceptional sensitivity of these rift lakes, however, is both a challenge and an opportunity when trying to reconstruct past climate changes from changes in the hydrological budget of lake basins on timescales 100 to 104 years. On one hand, differences in basin geometrics (shape, area, volume, depth), catchment rainfall distributions and varying erosion-deposition rates complicate regional interpretation of paleoclimate information from lacustrine sediment proxies. On the other hand, the sensitivity of rift lakes often provides paleoclimate records of excellent quality characterized by a high signal-to-noise ratio. This study aims at better understanding of the climate-proxy generating process in rift lakes by parameterizing the geomorphological and hydroclimatic conditions of a particular site providing a step towards the establishment of regional calibrations of transfer functions for climate reconstructions. The knowledge of the sensitivity of a lake basin to climate change furthermore is crucial for a better assessment of the probability of catastrophic changes in the future, which bear risks for landscapes, ecosystems, and organisms of all sorts, including humans. Part 1 of this thesis explores the effect of the morphology and the effective moisture of a lake catchment. The availability of digital elevation models (DEM) and gridded climate data sets facilitates the comparison of the morphological and hydroclimatic conditions of rift lakes. I used the hypsometric integral (HI) calculated from Shuttle Radar Topography Mission (SRTM) data to describe the morphology of ten lake basins in Kenya and Ethiopia. The aridity index (AI) describing the difference in the precipitation/evaporation balance within a catchment was used to compare the hydroclimatic of these basins. Correlating HI and AI with published Holocene lake-level variations revealed that lakes responding sensitively to relatively moderate climate change are typically graben shaped and characterized by a HI between 0.23-0.30, and relatively humid conditions with AI >1. These amplifier lakes, a term first introduced but not fully parameterized by Alayne Street-Perrott in the early 80s, are unexceptionally located in the crest of the Kenyan and Ethiopian domes. The non-amplifier lakes in the EARS either have lower HI 0.13-0.22 and higher AI (>1) or higher HI (0.31-0.37) and low AI (<1), reflecting pan-shaped morphologies with more arid hydroclimatic conditions. Part 2 of this work addresses the third important factor to be considered when using lake-level and proxy records to unravel past climate changes in the EARS: interbasin connectivity and groundwater flow through faulted and porous subsurface lithologies in a rift setting. First, I have compiled the available hydrogeological data including lithology, resistivity and water-well data for the adjacent Naivasha and Elmenteita-Nakuru basins in the Central Kenya Rift. Using this subsurface information and established records of lake-level decline at the last wet-dry climate transitions, i.e., the termination of the African Humid Period (AHP, 15 to 5 kyr BP), I used a linear decay model to estimate typical groundwater flow between the two basins. The results suggest a delayed response of the groundwater levels of ca. 5 kyrs if no recharge of groundwater occurs during the wet-dry transition, whereas the lag is 2-2.7 kyrs only using the modern recharge of ca. 0.52 m/yr. The estimated total groundwater flow from higher Lake Naivasha (1,880 m a.s.l. during the AHP) to Nakuru-Elmenteita (1,770 m) was 40 cubic kilometers. The unexpectedly large volume, more than half of the volume of the paleo-Lake Naivasha during the Early Holocene, emphasizes the importance of groundwater in hydrological modeling of paleo-lakes in rifts. Moreover, the subsurface connectivity of rift lakes also causes a significant lag time to the system introducing a nonlinear component to the system that has to be considered while interpreting paleo-lake records. Part 3 of this thesis investigated the modern intraseasonal precipitation variability within eleven lake basins discussed in the first section of the study excluding Lake Victoria and including Lake Tana. Remotely sensed rainfall estimates (RFE) from FEWS NET for 1996-2010, are used for the, March April May (MAM) July August September (JAS), October November (ON) and December January February (DJF). The seasonal precipitation are averaged and correlated with the prevailing regional and local climatic mechanisms. Results show high variability with Biennial to Triennial precipitation patterns. The spatial distribution of precipitation in JAS are linked to the onset and strength of the Congo Air Boundary (CAB) and Indian Summer Monsoon (ISM) dynamics. while in ON they are related to the strength of Positive ENSO and IOD phases This study describes the influence of graben morphologies, extreme climate constrasts within catchments and basins connectivity through faults and porous lithologies on rift lakes. Hence, it shows the importance of a careful characterization of a rift lake by these parameters prior to concluding from lake-level and proxy records to climate changes. Furthermore, this study highlights the exceptional sensitivity of rift lakes to relatively moderate climate change and its consequences for water availability to the biosphere including humans.
Motivation | Societal and economic needs of East Africa rely entirely on the availability of water, which is governed by the regular onset and retreat of the rainy seasons. Fluctuations in the amounts of rainfall has tremendous impact causing widespread famine, disease outbreaks and human migrations. Efforts towards high resolution forecasting of seasonal precipitation and hydrological systems are therefore needed, which requires high frequency short to long-term analyses of available climate data that I am going to present in this doctoral thesis by three different studies. 15,000 years - Suguta Valley | The main study of this thesis concentrated on the understanding of humidity changes within the last African Humid Period (AHP, 14.8-5.5 ka BP). The nature and causes of intensity variations of the West-African (WAM) and Indian Summer monsoons (ISM) during the AHP, especially their exact influence on regional climate relative to each other, is currently intensely debated. Here, I present a high-resolution multiproxy lake-level record spanning the AHP from the remote Suguta Valley in the northern Kenya Rift, located between the WAM and ISM domains. The presently desiccated valley was during the AHP filled by a 300 m deep and 2200 km2 large palaeo-lake due to an increase in precipitation of only 26%. The record explains the synchronous onset of large lakes in the East African Rift System (EARS) with the longitudinal shift of the Congo Air Boundary (CAB) over the East African and Ethiopian Plateaus, as the direct consequence of an enhanced atmospheric pressure gradient between East-Africa and India due to a precessional-forced northern hemisphere insolation maximum. Pronounced, and abrupt lake level fluctuations during the generally wet AHP are explained by small-scale solar irradiation changes weakening this pressure gradient atmospheric moisture availability preventing the CAB from reaching the study area. Instead, the termination of the AHP occurred, in a non-linear manner due to a change towards an equatorial insolation maximum ca. 6.5 ka ago extending the AHP over Ethiopia and West-Africa. 200 years - Lake Naivasha | The second part of the thesis focused on the analysis of a 200 year-old sediment core from Lake Naivasha in the Central Kenya Rift, one of the very few present freshwater lakes in East Africa. The results revealed and confirmed, that the appliance of proxy records for palaeo-climate reconstruction for the last 100 years within a time of increasing industrialisation and therefore human impact to the proxy-record containing sites are broadly limited. Since the middle of the 20th century, intense anthropogenic activity around Lake Naivasha has led to cultural eutrophication, which has overprinted the influence of natural climate variation to the lake usually inferred from proxy records such as diatoms, transfer-functions, geochemical and sedimentological analysis as used in this study. The results clarify the need for proxy records from remote unsettled areas to contribute with pristine data sets to current debates about anthropologic induced global warming since the past 100 years. 14 years - East African Rift | In order to avoid human influenced data sets and validate spatial and temporal heterogeneities of proxy-records from East Africa, the third part of the thesis therefore concentrated on the most recent past 14 years (1996-2010) detecting climate variability by using remotely sensed rainfall data. The advancement in the spatial coverage and temporal resolutions of rainfall data allow a better understanding of influencing climate mechanisms and help to better interpret proxy-records from the EARS in order to reconstruct past climate conditions. The study focuses on the dynamics of intraseasonal rainfall distribution within catchments of eleven lake basins in the EARS that are often used for palaeo-climate studies. We discovered that rainfall in adjacent basins exhibits high complexities in the magnitudes of intraseasonal variability, biennial to triennial precipitation patterns and even are not necessarily correlated often showing opposite trends. The variability among the watersheds is driven by the complex interaction of topography, in particular the shape, length and elevation of the catchment and its relative location to the East African Rift System and predominant influence of the ITCZ or CAB, whose locations and intensities are dependent on the strength of low pressure cells over India, SST variations in the Atlantic, Pacific or Indian Ocean, QBO phases and the 11-year solar cycle. Among all seasons we observed, January-September is the season of highest and most complex rainfall variability, especially for the East African Plateau basins, most likely due to the irregular penetration and sensitivity of the CAB.
The complete consumption of the oceanic domain of a tectonic plate by subduction into the upper mantle results in continent subduction, although continental crust is typically of lower density than the upper mantle. Thus, the sites of former oceanic domains (named suture zones) are generally decorated with stratigraphic sequences deposited along continental passive margins that were metamorphosed under low-grade, high-pressure conditions, i.e., low temperature/depth ratios (< 15°C/km) with respect to geothermal gradients in tectonically stable regions. Throughout the Mesozoic and Cenozoic (i.e., since ca. 250 Ma), the Mediterranean realm was shaped by the closure of the Tethyan Ocean, which likely consisted in numerous oceanic domains and microcontinents. However, the exact number and position of Tethyan oceans and continents (i.e., the Tethyan palaeogeography) remains debated. This is particularly the case of Western and Central Anatolia, where a continental fragment was accreted to the southern composite margin of the Eurasia sometime between the Late Cretaceous and the early Cenozoic. The most frontal part of this microcontinent experienced subduction-related metamorphism around 85-80 Ma, and collision-related metamorphism affected more external parts around 35 Ma. This unsually-long period between subduction- and collision-related metamorphisms (ca. 50 Ma) in units ascribed to the same continental edge constitutes a crucial issue to address in order to unravel how Anatolia was assembled. The Afyon Zone is a tectono-sedimentary unit exposed south and structurally below the front high-pressure belt. It is composed of a Mesozoic sedimentary sequence deposited on top of a Precambrian to Palaeozoic continental substratum, which can be traced from Northwestern to southern Central Anatolia, along a possible Tethyan suture. Whereas the Afyon Zone was defined as a low-pressure metamorphic unit, high-pressure minerals (mainly Fe-Mg-carpholite in metasediments) were recently reported from its central part. These findings shattered previous conceptions on the tectono-metamorphic evolution of the Afyon Zone in particular, and of the entire region in general, and shed light on the necessity to revise the regional extent of subduction-related metamorphism by re-inspecting the petrology of poorly-studied metasediments. In this purpose, I re-evaluated the metamorphic evolution of the entire Afyon Zone starting from field observations. Low-grade, high-pressure mineral assemblages (Fe-Mg-carpholite and glaucophane) are reported throughout the unit. Well-preserved carpholite-chloritoid assemblages are useful to improve our understanding of mineral relations and transitions in the FeO-MgO-Al2O3-SiO2-H2O system during rocks’ travel down to depth (prograde metamorphism). Inspection of petrographic textures, minute variations in mineral composition and Mg-Fe distribution among carpholite-chloritoid assemblages documents multistage mineral growth, accompanied by a progressive enrichment in Mg, and strong element partitioning. Using an updated database of mineral thermodynamic properties, I modelled the pressure and temperature conditions that are consistent with textural and chemical observations. Carpholite-bearing assemblages in the Afyon Zone account for a temperature increase from 280 to 380°C between 0.9 and 1.1 GPa (equivalent to a depth of 30-35 km). In order to further constrain regional geodynamics, first radiometric ages were determined in close association with pressure-temperature estimates for the Afyon Zone, as well as two other tectono-sedimentary units from the same continental passive margin (the Ören and Kurudere-Nebiler Units from SW Anatolia). For age determination, I employed 40Ar-39Ar geochronology on white mica in carpholite-bearing rocks. For thermobarometry, a multi-equilibrium approach was used based on quartz-chlorite-mica and quartz-chlorite-chloritoid associations formed at the expense of carpholite-bearing assemblages, i.e., during the exhumation from the subduction zone. This combination allows deciphering the significance of the calculated radiometric ages in terms of metamorphic conditions. Results show that the Afyon Zone and the Ören Unit represent a latest Cretaceous high-pressure metamorphic belt, and the Kurudere-Nebiler Unit was affected by subduction-related metamorphism around 45 Ma and cooled down after collision-related metamorphism around 26 Ma. The results provided in the present thesis and from the literature allow better understanding continental amalgamation in Western Anatolia. It is shown that at least two distinct oceanic branches, whereas only one was previously considered, have closed during continuous north-dipping subduction between 92 and 45 Ma. Between 85-80 and 70-65 Ma, a narrow continental domain (including the Afyon Zone) was buried into a subduction zone within the northern oceanic strand. Parts of the subducted continent crust were exhumed while the upper oceanic plate was transported southwards. Subduction of underlying lithosphere persisted, leading to the closure of the southern oceanic branch and to subduct the front of a second continental domain (including the Kurudere-Nebiler Unit). This followed by a continental collisional stage characterized by the cease of subduction, crustal thicknening and the detachment of the subducting oceanic slab from the accreted continent lithosphere. The present study supports that in the late Mesozoic the East Mediterranean realm had a complex tectonic configuration similar to present Southeast Asia or the Caribbean, with multiple, coexisting oceanic basins, microcontinents and subduction zones.
The impact of global warming on human water resources is attracting increasing attention. No other region in this world is so strongly affected by changes in water supply than the tropics. Especially in Africa, the availability and access to water is more crucial to existence (basic livelihoods and economic growth) than anywhere else on Earth. In East Africa, rainfall is mainly influenced by the migration of the Inter-Tropical Convergence Zone (ITCZ) and by the El Niño Southern Oscillation (ENSO) with more rain and floods during El Niño and severe droughts during La Niña. The forecasting of East African rainfall in a warming world requires a better understanding of the response of ENSO-driven variability to mean climate. Unfortunately, existing meteorological data sets are too short or incomplete to establish a precise evaluation of future climate. From Lake Challa near Mount Kilimanjaro, we report records from a laminated lake sediment core spanning the last 25,000 years. Analyzing a monthly cleared sediment trap confirms the annual origin of the laminations and demonstrates that the varve-thicknesses are strongly linked to the duration and strength of the windy season. Given the modern control of seasonal ITCZ location on wind and rain in this region and the inverse relation between the two, thicker varves represent windier and thus drier years. El Niño (La Niña) events are associated with wetter (drier) conditions in east Africa and decreased (increased) surface wind speeds. Based on this fact, the thickness of the varves can be used as a tool to reconstruct a) annual rainfall b) wind season strength, and c) ENSO variability. Within this thesis, I found evidence for centennialscale changes in ENSO-related rainfall variability during the last three millennia, abrupt changes in variability during the Medieval Climate Anomaly and the Little Ice Age, and an overall reduction in East African rainfall and its variability during the Last Glacial period. Climate model simulations support forward extrapolation from these lake-sediment data, indicating that a future Indian Ocean warming will enhance East Africa’s hydrological cycle and its interannual variability in rainfall. Furthermore, I compared geochemical analyses from the sediment trap samples with a broad range of limnological, meteorological, and geological parameters to characterize the impact of sedimentation processes from the in-situ rocks to the deposited sediments. As a result an excellent calibration for existing μXRF data from Lake Challa over the entire 25,000 year long profile was provided. The climate development during the last 25,000 years as reconstructed from the Lake Challa sediments is in good agreement with other studies and highlights the complex interactions between long-term orbital forcing, atmosphere, ocean and land surface conditions. My findings help to understand how abrupt climate changes occur and how these changes correlate with climate changes elsewhere on Earth.
Sediment records of three European lakes were investigated in order to reconstruct the regional climate development during the Lateglacial and Holocene, to investigate the response of local ecosystems to climatic fluctuations and human impact and to relate regional peculiarities of past climate development to climatic changes on a larger spatial scale. The Lake Hańcza (NE Poland) sediment record was studied with a focus on reconstructing the early Holocene climate development and identifying possible differences to Western Europe. Following the initial Holocene climatic improvement, a further climatic improvement occurred between 10 000 and 9000 cal. a BP. Apparently, relatively cold and dry climate conditions persisted in NE Poland during the first ca. 1500 years of the Holocene, most likely due to a specific regional atmospheric circulation pattern. Prevailing anticyclonic circulation linked to a high-pressure cell above the remaining Scandinavian Ice Sheet (SIS) might have blocked the eastward propagation of warm and moist Westerlies and thus attenuated the early Holocene climatic amelioration in this region until the final decay of the SIS, a pattern different from climate development in Western Europe. The Lateglacial sediment record of Lake Mondsee (Upper Austria) was investigated in order to study the regional climate development and the environmental response to rapid climatic fluctuations. While the temperature rise and environmental response at the onset of the Holocene took place quasi-synchronously, major leads and lags in proxy responses characterize the onset of the Lateglacial Interstadial. In particular, the spread of coniferous woodlands and the reduction of detrital flux lagged the initial Lateglacial warming by ca. 500–750 years. Major cooling at the onset of the Younger Dryas took place synchronously with a change in vegetation, while the increase of detrital matter flux was delayed by about 150–300 years. Complex proxy responses are also detected for short-term Lateglacial climatic fluctuations. In summary, periods of abrupt climatic changes are characterized by complex and temporally variable proxy responses, mainly controlled by ecosystem inertia and the environmental preconditions. A second study on the Lake Mondsee sediment record focused on two small-scale climate deteriorations around 8200 and 9100 cal. a BP, which have been triggered by freshwater discharges to the North Atlantic, causing a shutdown of the Atlantic meridional overturning circulation (MOC). Combining microscopic varve counting and AMS 14C dating yielded a precise duration estimate (ca. 150 years) and absolute dating of the 8.2 ka cold event, both being in good agreement with results from other palaeoclimate records. Moreover, a sudden temperature overshoot after the 8.2 ka cold event was identified, also seen in other proxy records around the North Atlantic. This was most likely caused by enhanced resumption of the MOC, which also initiated substantial shifts of oceanic and atmospheric front systems. Although there is also evidence from other proxy records for pronounced recovery of the MOC and atmospheric circulation changes after the 9.1 ka cold event, no temperature overshoot is seen in the Lake Mondsee record, indicating the complex behaviour of the global climate system. The Holocene sediment record of Lake Iseo (northern Italy) was studied to shed light on regional earthquake activity and the influence of climate variability and anthropogenic impact on catchment erosion and detrital flux into the lake. Frequent small-scale detrital layers within the sediments reflect allochthonous sediment supply by extreme surface runoff events. During the early to mid-Holocene, increased detrital flux coincides with periods of cold and wet climate conditions, thus apparently being mainly controlled by climate variability. In contrast, intervals of high detrital flux during the late Holocene partly also correlate with phases of increased human impact, reflecting the complex influences on catchment erosion processes. Five large-scale event layers within the sediments, which are composed of mass-wasting deposits and turbidites, are supposed to have been triggered by strong local earthquakes. While the uppermost of these event layers is assigned to a documented adjacent earthquake in AD 1222, the four other layers are supposed to be related to previously undocumented prehistorical earthquakes.
Dryland vulnerability : typical patterns and dynamics in support of vulnerability reduction efforts
(2011)
The pronounced constraints on ecosystem functioning and human livelihoods in drylands are frequently exacerbated by natural and socio-economic stresses, including weather extremes and inequitable trade conditions. Therefore, a better understanding of the relation between these stresses and the socio-ecological systems is important for advancing dryland development. The concept of vulnerability as applied in this dissertation describes this relation as encompassing the exposure to climate, market and other stresses as well as the sensitivity of the systems to these stresses and their capacity to adapt. With regard to the interest in improving environmental and living conditions in drylands, this dissertation aims at a meaningful generalisation of heterogeneous vulnerability situations. A pattern recognition approach based on clustering revealed typical vulnerability-creating mechanisms at global and local scales. One study presents the first analysis of dryland vulnerability with global coverage at a sub-national resolution. The cluster analysis resulted in seven typical patterns of vulnerability according to quantitative indication of poverty, water stress, soil degradation, natural agro-constraints and isolation. Independent case studies served to validate the identified patterns and to prove the transferability of vulnerability-reducing approaches. Due to their worldwide coverage, the global results allow the evaluation of a specific system’s vulnerability in its wider context, even in poorly-documented areas. Moreover, climate vulnerability of smallholders was investigated with regard to their food security in the Peruvian Altiplano. Four typical groups of households were identified in this local dryland context using indicators for harvest failure risk, agricultural resources, education and non-agricultural income. An elaborate validation relying on independently acquired information demonstrated the clear correlation between weather-related damages and the identified clusters. It also showed that household-specific causes of vulnerability were consistent with the mechanisms implied by the corresponding patterns. The synthesis of the local study provides valuable insights into the tailoring of interventions that reflect the heterogeneity within the social group of smallholders. The conditions necessary to identify typical vulnerability patterns were summarised in five methodological steps. They aim to motivate and to facilitate the application of the selected pattern recognition approach in future vulnerability analyses. The five steps outline the elicitation of relevant cause-effect hypotheses and the quantitative indication of mechanisms as well as an evaluation of robustness, a validation and a ranking of the identified patterns. The precise definition of the hypotheses is essential to appropriately quantify the basic processes as well as to consistently interpret, validate and rank the clusters. In particular, the five steps reflect scale-dependent opportunities, such as the outcome-oriented aspect of validation in the local study. Furthermore, the clusters identified in Northeast Brazil were assessed in the light of important endogenous processes in the smallholder systems which dominate this region. In order to capture these processes, a qualitative dynamic model was developed using generalised rules of labour allocation, yield extraction, budget constitution and the dynamics of natural and technological resources. The model resulted in a cyclic trajectory encompassing four states with differing degree of criticality. The joint assessment revealed aggravating conditions in major parts of the study region due to the overuse of natural resources and the potential for impoverishment. The changes in vulnerability-creating mechanisms identified in Northeast Brazil are well-suited to informing local adjustments to large-scale intervention programmes, such as “Avança Brasil”. Overall, the categorisation of a limited number of typical patterns and dynamics presents an efficient approach to improving our understanding of dryland vulnerability. Appropriate decision-making for sustainable dryland development through vulnerability reduction can be significantly enhanced by pattern-specific entry points combined with insights into changing hotspots of vulnerability and the transferability of successful adaptation strategies.
The past climate in central Asia, and especially on the Tibetan Plateau (TP), is of great importance for an understanding of global climate processes and for predicting the future climate. As a major influence on the climate in this region, the Asian Summer Monsoon (ASM) and its evolutionary history are of vital importance for accurate predictions. However, neither the evolutionary pattern of the summer monsoon nor the driving mechanisms behind it are yet clearly understood. For this research, I first synthesized previously published Late Glacial to Holocene climatic records from monsoonal central Asia in order to extract the general climate signals and the associated summer monsoon intensities. New climate and vegetation sequences were then established using improved quantitative methods, focusing on fossil pollen records recovered from Tibetan lakes and also incorporating new modern datasets. The pollen-vegetation and vegetation-climate relationships on the TP were also evaluated in order to achieve a better understanding of fossil pollen records. The synthesis of previously published moisture-related palaeoclimate records in monsoonal central Asia revealed generally different temporal patterns for the two monsoonal subsystems, i.e. the Indian Summer Monsoon (ISM) and East Asian Summer Monsoon (EASM). The ISM appears to have experienced maximum wet conditions during the early Holocene, while many records from the area affected by the EASM indicate relatively dry conditions at that time, particularly in north-central China where the maximum moisture levels occurred during the middle Holocene. A detailed consideration of possible driving factors affecting the summer monsoon, including summer solar insolation and sea surface temperatures, revealed that the ISM was primarily driven by variations in northern hemisphere solar insolation, and that the EASM may have been constrained by the ISM resulting in asynchronous patterns of evolution for these two subsystems. This hypothesis is further supported by modern monsoon indices estimated using the NCEP/NCAR Reanalysis data from the last 50 years, which indicate a significant negative correlation between the two summer monsoon subsystems. By analogy with the early Holocene, intensification of the ISM during coming decades could lead to increased aridification elsewhere as a result of the asynchronous nature of the monsoon subsystems, as can already be observed in the meteorological data from the last 15 years. A quantitative climate reconstruction using fossil pollen records was achieved through analysis of sediment core recovered from Lake Donggi Cona (in the north-eastern part of the TP) which has been dated back to the Last Glacial Maximum (LGM). A new data-set of modern pollen collected from large lakes in arid to semi-arid regions of central Asia is also presented herein. The concept of "pollen source area" was introduced to modern climate calibration based on pollen from large lakes, and was applied to the fossil pollen sequence from Lake Donggi Cona. Extremely dry conditions were found to have dominated the LGM, and a subsequent gradually increasing trend in moisture during the Late Glacial period was terminated by an abrupt reversion to a dry phase that lasted for about 1000 years and coincided with the first Heinrich Event of the northern Atlantic region. Subsequent periods corresponding to the warm Bølling-Allerød period and the Younger Dryas cold event were followed by moist conditions during the early Holocene, with annual precipitation of up to about 400 mm. A slightly drier trend after 9 cal ka BP was then followed by a second wet phase during the middle Holocene that lasted until 4.5 cal ka BP. Relatively steady conditions with only slight fluctuations then dominated the late Holocene, resulting in the present climatic conditions. In order to investigate the relationship between vegetation and climate, temporal variations in the possible driving factors for vegetation change on the northern TP were examined using a high resolution late Holocene pollen record from Lake Kusai. Moving-window Redundancy Analyses (RDAs) were used to evaluate the correlations between pollen assemblages and individual sedimentary proxies. These analyses have revealed frequent fluctuations in the relative abundances of alpine steppe and alpine desert components, and in particular a decrease in the total vegetation cover at around 1500 cal a BP. The climate was found to have had an important influence on vegetation changes when conditions were relatively wet and stable. However, after the 1500 cal a BP threshold in vegetation cover was crossed the vegetation appears to have been affected more by extreme events such as dust storms or fluvial erosion than by the general climatic trends. In addition, pollen spectra over the last 600 years have been revealed by Procrustes analysis to be significantly different from those recovered from older samples, which is attributed to an increased human impact that resulted in unprecedented changes to the composition of the vegetation. Theoretical models that have been developed and widely applied to the European area (i.e. the Extended R-Value (ERV) model and the Regional Estimates of Vegetation Abundance from Large Sites (REVEALS) model) have been applied to the high alpine TP ecosystems in order to investigate the pollen-vegetation relationships, as well as for quantitative reconstructions of vegetation abundance. The modern pollen–vegetation relationships for four common pollen species on the TP have been investigated using Poaceae as the reference taxa. The ERV Submodel 2 yielded relatively high PPEs for the steppe and desert taxa (Artemisia Chenopodiaceae), and low PPEs for the Cyperaceae that are characteristic of the alpine Kobresia meadows. The plant abundances on the central and north-eastern TP were quantified by applying these PPEs to four post-Late Glacial fossil pollen sequences. The reconstructed vegetation assemblages for the four pollen sequences always yielded smaller compositional species turnovers than suggested by the pollen spectra, indicating that the strength of the previously-reported vegetation changes may therefore have been overestimated. In summary, the key findings of this thesis are that (a) the two ASM subsystems show asynchronous patterns during both the Holocene and modern time periods, (b) fossil pollen records from large lakes reflect regional signals for which the pollen source areas need to be taken into account, (c) climate is not always the main driver for vegetation change, and (d) previously reported vegetation changes on the TP may have been overestimated because they ignored inter-species variations in pollen productivity.
Spatial and temporal temperature and moisture patterns across the Tibetan Plateau are very complex. The onset and magnitude of the Holocene climate optimum in the Asian monsoon realm, in particular, is a subject of considerable debate as this time period is often used as an analogue for recent global warming. In the light of contradictory inferences regarding past climate and environmental change on the Tibetan Plateau, I have attempted to explain mismatches in the timing and magnitude of change. Therefore, I analysed the temporal variation of fossil pollen and diatom spectra and the geochemical record from palaeo-ecological records covering different time scales (late Quaternary and the last 200 years) from two core regions in the NE and SE Tibetan Plateau. For interpretation purposes I combined my data with other available palaeo-ecological data to set up corresponding aquatic and terrestrial proxy data sets of two lake pairs and two sets of sites. I focused on the direct comparison of proxies representing lacustrine response to climate signals (e.g., diatoms, ostracods, geochemical record) and proxies representing changes in the terrestrial environment (i.e., terrestrial pollen), in order to asses whether the lake and its catchments respond at similar times and magnitudes to environmental changes. Therefore, I introduced the established numerical technique procrustes rotation as a new approach in palaeoecology to quantitatively compare raw data of any two sedimentary records of interest in order to assess their degree of concordance. Focusing on the late Quaternary, sediment cores from two lakes (Kuhai Lake 35.3°N; 99.2°E; 4150 m asl; and Koucha Lake 34.0°N; 97.2°E; 4540 m asl) on the semi-arid northeastern Tibetan Plateau were analysed to identify post-glacial vegetation and environmental changes, and to investigate the responses of lake ecosystems to such changes. Based on the pollen record, five major vegetation and climate changes could be identified: (1) A shift from alpine desert to alpine steppe indicates a change from cold, dry conditions to warmer and more moist conditions at 14.8 cal. ka BP, (2) alpine steppe with tundra elements points to conditions of higher effective moisture and a stepwise warming climate at 13.6 cal. ka BP, (3) the appearance of high-alpine meadow vegetation indicates a further change towards increased moisture, but with colder temperatures, at 7.0 cal. ka BP, (4) the reoccurrence of alpine steppe with desert elements suggests a return to a significantly colder and drier phase at 6.3 cal. ka BP, and (5) the establishment of alpine steppe-meadow vegetation indicates a change back to relatively moist conditions at 2.2 cal. ka BP. To place the reconstructed climate inferences from the NE Tibetan Plateau into the context of Holocene moisture evolution across the Tibetan Plateau, I applied a five-scale moisture index and average link clustering to all available continuous pollen and non-pollen palaeoclimate records from the Tibetan Plateau, in an attempt to detect coherent regional and temporal patterns of moisture evolution on the Plateau. However, no common temporal or spatial pattern of moisture evolution during the Holocene could be detected, which can be assigned to the complex responses of different proxies to environmental changes in an already very heterogeneous mountain landscape, where minor differences in elevation can result in marked variations in microenvironments. Focusing on the past 200 years, I analysed the sedimentary records (LC6 Lake 29.5°N, 94.3°E, 4132 m asl; and Wuxu Lake 29.9°N, 101.1°E, 3705 m asl) from the southeastern Tibetan Plateau. I found that despite presumed significant temperature increases over that period, pollen and diatom records from the SE Tibetan Plateau reveal only very subtle changes throughout their profiles. The compositional species turnover investigated over the last 200 years appears relatively low in comparison to the species reorganisations during the Holocene. The results indicate that climatically induced ecological thresholds are not yet crossed, but that human activity has an increasing influence, particularly on the terrestrial ecosystem. Forest clearances and reforestation have not caused forest decline in our study area, but a conversion of natural forests to semi-natural secondary forests. The results from the numerical proxy comparison of the two sets of two pairs of Tibetan lakes indicate that the use of different proxies and the work with palaeo-ecological records from different lake types can cause deviant stories of inferred change. Irrespective of the timescale (Holocene or last 200 years) or region (SE or NE Tibetan Plateau) analysed, the agreement in terms of the direction, timing, and magnitude of change between the corresponding terrestrial data sets is generally better than the match between the corresponding lacustrine data sets, suggesting that lacustrine proxies may partly be influenced by in-lake or local catchment processes whereas the terrestrial proxy reflects a more regional climatic signal. The current disaccord on coherent temporal and spatial climate patterns on the Tibetan Plateau can partly be ascribed to the complexity of proxy response and lake systems on the Tibetan Plateau. Therefore, a multi-proxy, multi-site approach is important in order to gain a reliable climate interpretation for the complex mountain landscape of the Tibetan Plateau.
Climate is the principal driving force of hydrological extremes like floods and attributing generating mechanisms is an essential prerequisite for understanding past, present, and future flood variability. Successively enhanced radiative forcing under global warming enhances atmospheric water-holding capacity and is expected to increase the likelihood of strong floods. In addition, natural climate variability affects the frequency and magnitude of these events on annual to millennial time-scales. Particularly in the mid-latitudes of the Northern Hemisphere, correlations between meteorological variables and hydrological indices suggest significant effects of changing climate boundary conditions on floods. To date, however, understanding of flood responses to changing climate boundary conditions is limited due to the scarcity of hydrological data in space and time. Exploring paleoclimate archives like annually laminated (varved) lake sediments allows to fill this gap in knowledge offering precise dated time-series of flood variability for millennia. During river floods, detrital catchment material is eroded and transported in suspension by fluid turbulence into downstream lakes. In the water body the transport capacity of the inflowing turbidity current successively diminishes leading to the deposition of detrital layers on the lake floor. Intercalated into annual laminations these detrital layers can be dated down to seasonal resolution. Microfacies analyses and X-ray fluorescence scanning (µ-XRF) at 200 µm resolution were conducted on the varved Mid- to Late Holocene interval of two sediment profiles from pre-alpine Lake Ammersee (southern Germany) located in a proximal (AS10prox) and distal (AS10dist) position towards the main tributary River Ammer. To shed light on sediment distribution within the lake, particular emphasis was (1) the detection of intercalated detrital layers and their micro-sedimentological features, and (2) intra-basin correlation of these deposits. Detrital layers were dated down to the season by microscopic varve counting and determination of the microstratigraphic position within a varve. The resulting chronology is verified by accelerator mass spectrometry (AMS) 14C dating of 14 terrestrial plant macrofossils. Since ~5500 varve years before present (vyr BP), in total 1573 detrital layers were detected in either one or both of the investigated sediment profiles. Based on their microfacies, geochemistry, and proximal-distal deposition pattern, detrital layers were interpreted as River Ammer flood deposits. Calibration of the flood layer record using instrumental daily River Ammer runoff data from AD 1926 to 1999 proves the flood layer succession to represent a significant time-series of major River Ammer floods in spring and summer, the flood season in the Ammersee region. Flood layer frequency trends are in agreement with decadal variations of the East Atlantic-Western Russia (EA-WR) atmospheric pattern back to 200 yr BP (end of the used atmospheric data) and solar activity back to 5500 vyr BP. Enhanced flood frequency corresponds to the negative EA-WR phase and reduced solar activity. These common links point to a central role of varying large-scale atmospheric circulation over Europe for flood frequency in the Ammersee region and suggest that these atmospheric variations, in turn, are likely modified by solar variability during the past 5500 years. Furthermore, the flood layer record indicates three shifts in mean layer thickness and frequency of different manifestation in both sediment profiles at ~5500, ~2800, and ~500 vyr BP. Combining information from both sediment profiles enabled to interpret these shifts in terms of stepwise increases in mean flood intensity. Likely triggers of these shifts are gradual reduction of Northern Hemisphere orbital summer forcing and long-term solar activity minima. Hypothesized atmospheric response to this forcing is hemispheric cooling that enhances equator-to-pole temperature gradients and potential energy in the troposphere. This energy is transferred into stronger westerly cyclones, more extreme precipitation, and intensified floods at Lake Ammersee. Interpretation of flood layer frequency and thickness data in combination with reanalysis models and time-series analysis allowed to reconstruct the flood history and to decipher flood triggering climate mechanisms in the Ammersee region throughout the past 5500 years. Flood frequency and intensity are not stationary, but influenced by multi-causal climate forcing of large-scale atmospheric modes on time-scales from years to millennia. These results challenge future projections that propose an increase in floods when Earth warms based only on the assumption of an enhanced hydrological cycle.
The potential increase in frequency and magnitude of extreme floods is currently discussed in terms of global warming and the intensification of the hydrological cycle. The profound knowledge of past natural variability of floods is of utmost importance in order to assess flood risk for the future. Since instrumental flood series cover only the last ~150 years, other approaches to reconstruct historical and pre-historical flood events are needed. Annually laminated (varved) lake sediments are meaningful natural geoarchives because they provide continuous records of environmental changes > 10000 years down to a seasonal resolution. Since lake basins additionally act as natural sediment traps, the riverine sediment supply, which is preserved as detrital event layers in the lake sediments, can be used as a proxy for extreme discharge events. Within my thesis I examined a ~ 8.50 m long sedimentary record from the pre-Alpine Lake Mondsee (Northeast European Alps), which covered the last 7000 years. This sediment record consists of calcite varves and intercalated detrital layers, which range in thickness from 0.05 to 32 mm. Detrital layer deposition was analysed by a combined method of microfacies analysis via thin sections, Scanning Electron Microscopy (SEM), μX-ray fluorescence (μXRF) scanning and magnetic susceptibility. This approach allows characterizing individual detrital event layers and assigning a corresponding input mechanism and catchment. Based on varve counting and controlled by 14C age dates, the main goals of this thesis are (i) to identify seasonal runoff processes, which lead to significant sediment supply from the catchment into the lake basin and (ii) to investigate flood frequency under changing climate boundary conditions. This thesis follows a line of different time slices, presenting an integrative approach linking instrumental and historical flood data from Lake Mondsee in order to evaluate the flood record inferred from Lake Mondsee sediments. The investigation of eleven short cores covering the last 100 years reveals the abundance of 12 detrital layers. Therein, two types of detrital layers are distinguished by grain size, geochemical composition and distribution pattern within the lake basin. Detrital layers, which are enriched in siliciclastic and dolomitic material, reveal sediment supply from the Flysch sediments and Northern Calcareous Alps into the lake basin. These layers are thicker in the northern lake basin (0.1-3.9 mm) and thinner in the southern lake basin (0.05-1.6 mm). Detrital layers, which are enriched in dolomitic components forming graded detrital layers (turbidites), indicate the provenance from the Northern Calcareous Alps. These layers are generally thicker (0.65-32 mm) and are solely recorded within the southern lake basin. In comparison with instrumental data, thicker graded layers result from local debris flow events in summer, whereas thin layers are deposited during regional flood events in spring/summer. Extreme summer floods as reported from flood layer deposition are principally caused by cyclonic activity from the Mediterranean Sea, e.g. July 1954, July 1997 and August 2002. During the last two millennia, Lake Mondsee sediments reveal two significant flood intervals with decadal-scale flood episodes, during the Dark Ages Cold Period (DACP) and the transition from the Medieval Climate Anomaly (MCA) into the Little Ice Age (LIA) suggesting a linkage of transition to climate cooling and summer flood recurrences in the Northeastern Alps. In contrast, intermediate or decreased flood episodes appeared during the MWP and the LIA. This indicates a non-straightforward relationship between temperature and flood recurrence, suggesting higher cyclonic activity during climate transition in the Northeast Alps. The 7000-year flood chronology reveals 47 debris flows and 269 floods, with increased flood activity shifting around 3500 and 1500 varve yr BP (varve yr BP = varve years before present, before present = AD 1950). This significant increase in flood activity shows a coincidence with millennial-scale climate cooling that is reported from main Alpine glacier advances and lower tree lines in the European Alps since about 3300 cal. yr BP (calibrated years before present). Despite relatively low flood occurrence prior to 1500 varve yr BP, floods at Lake Mondsee could have also influenced human life in early Neolithic lake dwellings (5750-4750 cal. yr BP). While the first lake dwellings were constructed on wetlands, the later lake dwellings were built on piles in the water suggesting an early flood risk adaptation of humans and/or a general change of the Late Neolithic Culture of lake-dwellers because of socio-economic reasons. However, a direct relationship between the final abandonment of the lake dwellings and higher flood frequencies is not evidenced.
Agriculture is one of the most important human activities providing food and more agricultural goods for seven billion people around the world and is of special importance in sub-Saharan Africa. The majority of people depends on the agricultural sector for their livelihoods and will suffer from negative climate change impacts on agriculture until the middle and end of the 21st century, even more if weak governments, economic crises or violent conflicts endanger the countries’ food security. The impact of temperature increases and changing precipitation patterns on agricultural vegetation motivated this thesis in the first place. Analyzing the potentials of reducing negative climate change impacts by adapting crop management to changing climate is a second objective of the thesis. As a precondition for simulating climate change impacts on agricultural crops with a global crop model first the timing of sowing in the tropics was improved and validated as this is an important factor determining the length and timing of the crops´ development phases, the occurrence of water stress and final crop yield. Crop yields are projected to decline in most regions which is evident from the results of this thesis, but the uncertainties that exist in climate projections and in the efficiency of adaptation options because of political, economical or institutional obstacles have to be considered. The effect of temperature increases and changing precipitation patterns on crop yields can be analyzed separately and varies in space across the continent. Southern Africa is clearly the region most susceptible to climate change, especially to precipitation changes. The Sahel north of 13° N and parts of Eastern Africa with short growing seasons below 120 days and limited wet season precipitation of less than 500 mm are also vulnerable to precipitation changes while in most other part of East and Central Africa, in contrast, the effect of temperature increase on crops overbalances the precipitation effect and is most pronounced in a band stretching from Angola to Ethiopia in the 2060s. The results of this thesis confirm the findings from previous studies on the magnitude of climate change impact on crops in sub-Saharan Africa but beyond that helps to understand the drivers of these changes and the potential of certain management strategies for adaptation in more detail. Crop yield changes depend on the initial growing conditions, on the magnitude of climate change, and on the crop, cropping system and adaptive capacity of African farmers which is only now evident from this comprehensive study for sub-Saharan Africa. Furthermore this study improves the representation of tropical cropping systems in a global crop model and considers the major food crops cultivated in sub-Saharan Africa and climate change impacts throughout the continent.
Growing populations, continued economic development, and limited natural resources are critical factors affecting sustainable development. These factors are particularly pertinent in developing countries in which large parts of the population live at a subsistence level and options for sustainable development are limited. Therefore, addressing sustainable land use strategies in such contexts requires that decision makers have access to evidence-based impact assessment tools that can help in policy design and implementation. Ex-ante impact assessment is an emerging field poised at the science-policy interface and is used to assess the potential impacts of policy while also exploring trade-offs between economic, social and environmental sustainability targets. The objective of this study was to operationalise the impact assessment of land use scenarios in the context of developing countries that are characterised by limited data availability and quality. The Framework for Participatory Impact Assessment (FoPIA) was selected for this study because it allows for the integration of various sustainability dimensions, the handling of complexity, and the incorporation of local stakeholder perceptions. FoPIA, which was originally developed for the European context, was adapted to the conditions of developing countries, and its implementation was demonstrated in five selected case studies. In each case study, different land use options were assessed, including (i) alternative spatial planning policies aimed at the controlled expansion of rural-urban development in the Yogyakarta region (Indonesia), (ii) the expansion of soil and water conservation measures in the Oum Zessar watershed (Tunisia), (iii) the use of land conversion and the afforestation of agricultural areas to reduce soil erosion in Guyuan district (China), (iv) agricultural intensification and the potential for organic agriculture in Bijapur district (India), and (v) land division and privatisation in Narok district (Kenya). The FoPIA method was effectively adapted by dividing the assessment into three conceptual steps: (i) scenario development; (ii) specification of the sustainability context; and (iii) scenario impact assessment. A new methodological approach was developed for communicating alternative land use scenarios to local stakeholders and experts and for identifying recommendations for future land use strategies. Stakeholder and expert knowledge was used as the main sources of information for the impact assessment and was complemented by available quantitative data. Based on the findings from the five case studies, FoPIA was found to be suitable for implementing the impact assessment at case study level while ensuring a high level of transparency. FoPIA supports the identification of causal relationships underlying regional land use problems, facilitates communication among stakeholders and illustrates the effects of alternative decision options with respect to all three dimensions of sustainable development. Overall, FoPIA is an appropriate tool for performing preliminary assessments but cannot replace a comprehensive quantitative impact assessment, and FoPIA should, whenever possible, be accompanied by evidence from monitoring data or analytical tools. When using FoPIA for a policy oriented impact assessment, it is recommended that the process should follow an integrated, complementary approach that combines quantitative models, scenario techniques, and participatory methods.
The Indian summer monsoon (ISM) is one of the largest climate systems on earth and impacts the livelihood of nearly 40% of the world’s population. Despite dedicated efforts, a comprehensive picture of monsoon variability has proved elusive largely due to the absence of long term high resolution records, spatial inhomogeneity of the monsoon precipitation, and the complex forcing mechanisms (solar insolation, internal teleconnections for e.g., El Niño-Southern Oscillation, tropical-midlatitude interactions). My work aims to improve the understanding of monsoon variability through generation of long term high resolution palaeoclimate data from climatically sensitive regions in the ISM and westerlies domain. To achieve this aim I have (i) identified proxies (sedimentological, geochemical, isotopic, and mineralogical) that are sensitive to environmental changes; (ii) used the identified proxies to generate long term palaeoclimate data from two climatically sensitive regions, one in NW Himalayas (transitional westerlies and ISM domain in the Spiti valley and one in the core monsoon zone (Lonar lake) in central India); (iii) undertaken a regional overview to generate “snapshots” of selected time slices; and (iv) interpreted the spatial precipitation anomalies in terms of those caused by modern teleconnections. This approach must be considered only as the first step towards identifying the past teleconnections as the boundary conditions in the past were significantly different from today and would have impacted the precipitation anomalies. As the Spiti valley is located in the in the active tectonic orogen of Himalayas, it was essential to understand the role of regional tectonics to make valid interpretations of catchment erosion and detrital influx into the lake. My approach of using integrated structural/morphometric and geomorphic signatures provided clear evidence for active tectonics in this area and demonstrated the suitability of these lacustrine sediments as palaleoseismic archives. The investigations on the lacustrine outcrops in Spiti valley also provided information on changes in seasonality of precipitation and occurrence of frequent and intense periods (ca. 6.8-6.1 cal ka BP) of detrital influx indicating extreme hydrological events in the past. Regional comparison for this time slice indicates a possible extended “break-monsoon like” mode for the monsoon that favors enhanced precipitation over the Tibetan plateau, Himalayas and their foothills. My studies on surface sediments from Lonar lake helped to identify environmentally sensitive proxies which could also be used to interpret palaeodata obtained from a ca. 10m long core raised from the lake in 2008. The core encompasses the entire Holocene and is the first well dated (by 14C) archive from the core monsoon zone of central India. My identification of authigenic evaporite gaylussite crystals within the core sediments provided evidence of exceptionally drier conditions during 4.7-3.9 and 2.0-0.5 cal ka BP. Additionally, isotopic investigations on these crystals provided information on eutrophication, stratification, and carbon cycling processes in the lake.
Tectonic and geological processes on Earth often result in structural anisotropy of the subsurface, which can be imaged by various geophysical methods. In order to achieve appropriate and realistic Earth models for interpretation, inversion algorithms have to allow for an anisotropic subsurface. Within the framework of this thesis, I analyzed a magnetotelluric (MT) data set taken from the Cape Fold Belt in South Africa. This data set exhibited strong indications for crustal anisotropy, e.g. MT phases out of the expected quadrant, which are beyond of fitting and interpreting with standard isotropic inversion algorithms. To overcome this obstacle, I have developed a two-dimensional inversion method for reconstructing anisotropic electrical conductivity distributions. The MT inverse problem represents in general a non-linear and ill-posed minimization problem with many degrees of freedom: In isotropic case, we have to assign an electrical conductivity value to each cell of a large grid to assimilate the Earth's subsurface, e.g. a grid with 100 x 50 cells results in 5000 unknown model parameters in an isotropic case; in contrast, we have the sixfold in an anisotropic scenario where the single value of electrical conductivity becomes a symmetric, real-valued tensor while the number of the data remains unchanged. In order to successfully invert for anisotropic conductivities and to overcome the non-uniqueness of the solution of the inverse problem it is necessary to use appropriate constraints on the class of allowed models. This becomes even more important as MT data is not equally sensitive to all anisotropic parameters. In this thesis, I have developed an algorithm through which the solution of the anisotropic inversion problem is calculated by minimization of a global penalty functional consisting of three entries: the data misfit, the model roughness constraint and the anisotropy constraint. For comparison, in an isotropic approach only the first two entries are minimized. The newly defined anisotropy term is measured by the sum of the square difference of the principal conductivity values of the model. The basic idea of this constraint is straightforward. If an isotropic model is already adequate to explain the data, there is no need to introduce electrical anisotropy at all. In order to ensure successful inversion, appropriate trade-off parameters, also known as regularization parameters, have to be chosen for the different model constraints. Synthetic tests show that using fixed trade-off parameters usually causes the inversion to end up by either a smooth model with large RMS error or a rough model with small RMS error. Using of a relaxation approach on the regularization parameters after each successful inversion iteration will result in smoother inversion model and a better convergence. This approach seems to be a sophisticated way for the selection of trade-off parameters. In general, the proposed inversion method is adequate for resolving the principal conductivities defined in horizontal plane. Once none of the principal directions of the anisotropic structure is coincided with the predefined strike direction, only the corresponding effective conductivities, which is the projection of the principal conductivities onto the model coordinate axes direction, can be resolved and the information about the rotation angles is lost. In the end the MT data from the Cape Fold Belt in South Africa has been analyzed. The MT data exhibits an area (> 10 km) where MT phases over 90 degrees occur. This part of data cannot be modeled by standard isotropic modeling procedures and hence can not be properly interpreted. The proposed inversion method, however, could not reproduce the anomalous large phases as desired because of losing the information about rotation angles. MT phases outside the first quadrant are usually obtained by different anisotropic anomalies with oblique anisotropy strike. In order to achieve this challenge, the algorithm needs further developments. However, forward modeling studies with the MT data have shown that surface highly conductive heterogeneity in combination with a mid-crustal electrically anisotropic zone are required to fit the data. According to known geological and tectonic information the mid-crustal zone is interpreted as a deep aquifer related to the fractured Table Mountain Group rocks in the Cape Fold Belt.
Soil conditions under vegetation cover and their spatial and temporal variations from point to catchment scale are crucial for understanding hydrological processes within the vadose zone, for managing irrigation and consequently maximizing yield by precision farming. Soil moisture and soil roughness are the key parameters that characterize the soil status. In order to monitor their spatial and temporal variability on large scales, remote sensing techniques are required. Therefore the determination of soil parameters under vegetation cover was approached in this thesis by means of (multi-angular) polarimetric SAR acquisitions at a longer wavelength (L-band, lambda=23cm). In this thesis, the penetration capabilities of L-band are combined with newly developed (multi-angular) polarimetric decomposition techniques to separate the different scattering contributions, which are occurring in vegetation and on ground. Subsequently the ground components are inverted to estimate the soil characteristics. The novel (multi-angular) polarimetric decomposition techniques for soil parameter retrieval are physically-based, computationally inexpensive and can be solved analytically without any a priori knowledge. Therefore they can be applied without test site calibration directly to agricultural areas. The developed algorithms are validated with fully polarimetric SAR data acquired by the airborne E-SAR sensor of the German Aerospace Center (DLR) for three different study areas in Germany. The achieved results reveal inversion rates up to 99% for the soil moisture and soil roughness retrieval in agricultural areas. However, in forested areas the inversion rate drops significantly for most of the algorithms, because the inversion in forests is invalid for the applied scattering models at L-band. The validation against simultaneously acquired field measurements indicates an estimation accuracy (root mean square error) of 5-10vol.% for the soil moisture (range of in situ values: 1-46vol.%) and of 0.37-0.45cm for the soil roughness (range of in situ values: 0.5-4.0cm) within the catchment. Hence, a continuous monitoring of soil parameters with the obtained precision, excluding frozen and snow covered conditions, is possible. Especially future, fully polarimetric, space-borne, long wavelength SAR missions can profit distinctively from the developed polarimetric decomposition techniques for separation of ground and volume contributions as well as for soil parameter retrieval on large spatial scales.
Modelling of environmental change impacts on water resources and hydrological extremes in Germany
(2012)
Water resources, in terms of quantity and quality, are significantly influenced by environmental changes, especially by climate and land use changes. The main objective of the present study is to project climate change impacts on the seasonal dynamics of water fluxes, spatial changes in water balance components as well as the future flood and low flow conditions in Germany. This study is based on the modeling results of the process-based eco-hydrological model SWIM (Soil and Water Integrated Model) driven by various regional climate scenarios on one hand. On the other hand, it is supported by statistical analysis on long-term trends of observed and simulated time series. In addition, this study evaluates the impacts of potential land use changes on water quality in terms of NO3-N load in selected sub-regions of the Elbe basin. In the context of climate change, the actual evapotransipration is likely to increase in most parts of Germany, while total runoff generation may decrease in south and east regions in the scenario period 2051-2060. Water discharge in all six studied large rivers (Ems, Weser, Saale, Danube, Main and Neckar) would be 8 – 30% lower in summer and autumn compared to the reference period (1961 – 1990), and the strongest decline is expected for the Saale, Danube and Neckar. The 50-year low flow is likely to occur more frequently in western, southern and central Germany after 2061 as suggested by more than 80% of the model runs. The current low flow period (from August to September) may be extended until the late autumn at the end of this century. Higher winter flow is expected in all of these rivers, and the increase is most significant for the Ems (about 18%). No general pattern of changes in flood directions can be concluded according to the results driven by different RCMs, emission scenarios and multi-realizations. An optimal agricultural land use and management are essential for the reduction in nutrient loads and improvement of water quality. In the Weiße Elster and Unstrut sub-basins (Elbe), an increase of 10% in the winter rape area can result in 12-19% more NO3-N load in rivers. In contrast, another energy plant, maize, has a moderate effect on the water environment. Mineral fertilizers have a much stronger effect on the NO3-N load than organic fertilizers. Cover crops, which play an important role in the reduction of nitrate losses from fields, should be maintained on cropland. The uncertainty in estimating future high flows and, in particular, extreme floods remain high due to different RCM structures, emission scenarios and multi-realizations. In contrast, the projection of low flows under warmer climate conditions appears to be more pronounced and consistent. The largest source of uncertainty related to NO3-N modelling originates from the input data on the agricultural management.
One of the major problems for the implementation of water resources planning and management in arid and semi-arid environments is the scarcity of hydrological data and, consequently, research studies. In this thesis, the hydrology of dryland river systems was analyzed and a semi-distributed hydrological model and a forecasting approach were developed for flow transmission processes in river-systems with a focus on semi-arid conditions. Three different sources of hydrological data (streamflow series, groundwater level series and multi-temporal satellite data) were combined in order to analyze the channel transmission losses of a large reach of the Jaguaribe River in NE Brazil. A perceptual model of this reach was derived suggesting that the application of models, which were developed for sub-humid and temperate regions, may be more suitable for this reach than classical models, which were developed for arid and semi-arid regions. Summarily, it was shown that this river reach is hydraulically connected with groundwater and shifts from being a losing river at the dry and beginning of rainy seasons to become a losing/gaining (mostly losing) river at the middle and end of rainy seasons. A new semi-distributed channel transmission losses model was developed, which was based primarily on the capability of simulation in very different dryland environments and flexible model structures for testing hypotheses on the dominant hydrological processes of rivers. This model was successfully tested in a large reach of the Jaguaribe River in NE Brazil and a small stream in the Walnut Gulch Experimental Watershed in the SW USA. Hypotheses on the dominant processes of the channel transmission losses (different model structures) in the Jaguaribe river were evaluated, showing that both lateral (stream-)aquifer water fluxes and ground-water flow in the underlying alluvium parallel to the river course are necessary to predict streamflow and channel transmission losses, the former process being more relevant than the latter. This procedure not only reduced model structure uncertainties, but also reported modelling failures rejecting model structure hypotheses, namely streamflow without river-aquifer interaction and stream-aquifer flow without groundwater flow parallel to the river course. The application of the model to different dryland environments enabled learning about the model itself from differences in channel reach responses. For example, the parameters related to the unsaturated part of the model, which were active for the small reach in the USA, presented a much greater variation in the sensitivity coefficients than those which drove the saturated part of the model, which were active for the large reach in Brazil. Moreover, a nonparametric approach, which dealt with both deterministic evolution and inherent fluctuations in river discharge data, was developed based on a qualitative dynamical system-based criterion, which involved a learning process about the structure of the time series, instead of a fitting procedure only. This approach, which was based only on the discharge time series itself, was applied to a headwater catchment in Germany, in which runoff are induced by either convective rainfall during the summer or snow melt in the spring. The application showed the following important features: • the differences between runoff measurements were more suitable than the actual runoff measurements when using regression models; • the catchment runoff system shifted from being a possible dynamical system contaminated with noise to a linear random process when the interval time of the discharge time series increased; • and runoff underestimation can be expected for rising limbs and overestimation for falling limbs. This nonparametric approach was compared with a distributed hydrological model designed for real-time flood forecasting, with both presenting similar results on average. Finally, a benchmark for hydrological research using semi-distributed modelling was proposed, based on the aforementioned analysis, modelling and forecasting of flow transmission processes. The aim of this benchmark was not to describe a blue-print for hydrological modelling design, but rather to propose a scientific method to improve hydrological knowledge using semi-distributed hydrological modelling. Following the application of the proposed benchmark to a case study, the actual state of its hydrological knowledge and its predictive uncertainty can be determined, primarily through rejected hypotheses on the dominant hydrological processes and differences in catchment/variables responses.
Current climate warming is affecting arctic regions at a faster rate than the rest of the world. This has profound effects on permafrost that underlies most of the arctic land area. Permafrost thawing can lead to the liberation of considerable amounts of greenhouse gases as well as to significant changes in the geomorphology, hydrology, and ecology of the corresponding landscapes, which may in turn act as a positive feedback to the climate system. Vast areas of the east Siberian lowlands, which are underlain by permafrost of the Yedoma-type Ice Complex, are particularly sensitive to climate warming because of the high ice content of these permafrost deposits. Thermokarst and thermal erosion are two major types of permafrost degradation in periglacial landscapes. The associated landforms are prominent indicators of climate-induced environmental variations on the regional scale. Thermokarst lakes and basins (alasses) as well as thermo-erosional valleys are widely distributed in the coastal lowlands adjacent to the Laptev Sea. This thesis investigates the spatial distribution and morphometric properties of these degradational features to reconstruct their evolutionary conditions during the Holocene and to deduce information on the potential impact of future permafrost degradation under the projected climate warming. The methodological approach is a combination of remote sensing, geoinformation, and field investigations, which integrates analyses on local to regional spatial scales. Thermokarst and thermal erosion have affected the study region to a great extent. In the Ice Complex area of the Lena River Delta, thermokarst basins cover a much larger area than do present thermokarst lakes on Yedoma uplands (20.0 and 2.2 %, respectively), which indicates that the conditions for large-area thermokarst development were more suitable in the past. This is supported by the reconstruction of the development of an individual alas in the Lena River Delta, which reveals a prolonged phase of high thermokarst activity since the Pleistocene/Holocene transition that created a large and deep basin. After the drainage of the primary thermokarst lake during the mid-Holocene, permafrost aggradation and degradation have occurred in parallel and in shorter alternating stages within the alas, resulting in a complex thermokarst landscape. Though more dynamic than during the first phase, late Holocene thermokarst activity in the alas was not capable of degrading large portions of Pleistocene Ice Complex deposits and substantially altering the Yedoma relief. Further thermokarst development in existing alasses is restricted to thin layers of Holocene ice-rich alas sediments, because the Ice Complex deposits underneath the large primary thermokarst lakes have thawed completely and the underlying deposits are ice-poor fluvial sands. Thermokarst processes on undisturbed Yedoma uplands have the highest impact on the alteration of Ice Complex deposits, but will be limited to smaller areal extents in the future because of the reduced availability of large undisturbed upland surfaces with poor drainage. On Kurungnakh Island in the central Lena River Delta, the area of Yedoma uplands available for future thermokarst development amounts to only 33.7 %. The increasing proximity of newly developing thermokarst lakes on Yedoma uplands to existing degradational features and other topographic lows decreases the possibility for thermokarst lakes to reach large sizes before drainage occurs. Drainage of thermokarst lakes due to thermal erosion is common in the study region, but thermo-erosional valleys also provide water to thermokarst lakes and alasses. Besides these direct hydrological interactions between thermokarst and thermal erosion on the local scale, an interdependence between both processes exists on the regional scale. A regional analysis of extensive networks of thermo-erosional valleys in three lowland regions of the Laptev Sea with a total study area of 5,800 km² found that these features are more common in areas with higher slopes and relief gradients, whereas thermokarst development is more pronounced in flat lowlands with lower relief gradients. The combined results of this thesis highlight the need for comprehensive analyses of both, thermokarst and thermal erosion, in order to assess past and future impacts and feedbacks of the degradation of ice-rich permafrost on hydrology and climate of a certain region.
Landslides are one of the biggest natural hazards in Georgia, a mountainous country in the Caucasus. So far, no systematic monitoring and analysis of the dynamics of landslides in Georgia has been made. Especially as landslides are triggered by extrinsic processes, the analysis of landslides together with precipitation and earthquakes is challenging. In this thesis I describe the advantages and limits of remote sensing to detect and better understand the nature of landslide in Georgia. The thesis is written in a cumulative form, composing a general introduction, three manuscripts and a summary and outlook chapter. In the present work, I measure the surface displacement due to active landslides with different interferometric synthetic aperture radar (InSAR) methods. The slow landslides (several cm per year) are well detectable with two-pass interferometry. In same time, the extremely slow landslides (several mm per year) could be detected only with time series InSAR techniques. I exemplify the success of InSAR techniques by showing hitherto unknown landslides, located in the central part of Georgia. Both, the landslide extent and displacement rate is quantified. Further, to determine a possible depth and position of potential sliding planes, inverse models were developed. Inverse modeling searches for parameters of source which can create observed displacement distribution. I also empirically estimate the volume of the investigated landslide using displacement distributions as derived from InSAR combined with morphology from an aerial photography. I adapted a volume formula for our case, and also combined available seismicity and precipitation data to analyze potential triggering factors. A governing question was: What causes landslide acceleration as observed in the InSAR data? The investigated area (central Georgia) is seismically highly active. As an additional product of the InSAR data analysis, a deformation area associated with the 7th September Mw=6.0 earthquake was found. Evidences of surface ruptures directly associated with the earthquake could not be found in the field, however, during and after the earthquake new landslides were observed. The thesis highlights that deformation from InSAR may help to map area prone landslides triggering by earthquake, potentially providing a technique that is of relevance for country wide landslide monitoring, especially as new satellite sensors will emerge in the coming years.
Several mechanisms are proposed to be part of the earthquake triggering process, including static stress interactions and dynamic stress transfer. Significant differences of these mechanisms are particularly expected in the spatial distribution of aftershocks. However, testing the different hypotheses is challenging because it requires the consideration of the large uncertainties involved in stress calculations as well as the appropriate consideration of secondary aftershock triggering which is related to stress changes induced by smaller pre- and aftershocks. In order to evaluate the forecast capability of different mechanisms, I take the effect of smaller--magnitude earthquakes into account by using the epidemic type aftershock sequence (ETAS) model where the spatial probability distribution of direct aftershocks, if available, is correlated to alternative source information and mechanisms. Surface shaking, rupture geometry, and slip distributions are tested. As an approximation of the shaking level, ShakeMaps are used which are available in near real-time after a mainshock and thus could be used for first-order forecasts of the spatial aftershock distribution. Alternatively, the use of empirical decay laws related to minimum fault distance is tested and Coulomb stress change calculations based on published and random slip models. For comparison, the likelihood values of the different model combinations are analyzed in the case of several well-known aftershock sequences (1992 Landers, 1999 Hector Mine, 2004 Parkfield). The tests show that the fault geometry is the most valuable information for improving aftershock forecasts. Furthermore, they reveal that static stress maps can additionally improve the forecasts of off--fault aftershock locations, while the integration of ground shaking data could not upgrade the results significantly. In the second part of this work, I focused on a procedure to test the information content of inverted slip models. This allows to quantify the information gain if this kind of data is included in aftershock forecasts. For this purpose, the ETAS model based on static stress changes, which is introduced in part one, is applied. The forecast ability of the models is systematically tested for several earthquake sequences and compared to models using random slip distributions. The influence of subfault resolution and segment strike and dip is tested. Some of the tested slip models perform very good, in that cases almost no random slip models are found to perform better. Contrastingly, for some of the published slip models, almost all random slip models perform better than the published slip model. Choosing a different subfault resolution hardly influences the result, as long the general slip pattern is still reproducible. Whereas different strike and dip values strongly influence the results depending on the standard deviation chosen, which is applied in the process of randomly selecting the strike and dip values.
Black shales are sedimentary rocks with a high content of organic carbon, which leads to a dark grayish to black color. Due to their potential to contain oil or gas, black shales are of great interest for the support of the worldwide energy supply. An integrated seismic investigation of the Lower Palaeozoic black shales was carried out at the Danish island Bornholm to locate the shallow-lying Alum Shale layer and its surrounding formations and to characterize its potential as a source rock. Therefore, two seismic experiments at a total of three crossing profiles were carried out in October 2010 and in June 2012 in the southern part of the island. Two different active measurements were conducted with either a weight drop source or a minivibrator. Additionally, the ambient noise field was recorded at the study location over a time interval of about one day, and also a laboratory analysis of borehole samples was carried out. The seismic profiles were positioned as close as possible to two scientific boreholes which were used for comparative purposes. The seismic field data was analyzed with traveltime tomography, surface wave inversion and seismic interferometry to obtain the P-wave and S-wave velocity models of the subsurface. The P-wave velocity models which were determined for all three profiles clearly locate the Alum Shale layer between the Komstad Limestone layer on top and the Læså Sandstone Formation at the base of the models. The black shale layer has P-wave velocities around 3 km/s which are lower compared to the adjacent formations. Due to a very good agreement of the sonic log and the vertical velocity profiles of the two seismic lines, which are directly crossing the borehole where the sonic log was conducted, the reliability of the traveltime tomography is proven. A correlation of the seismic velocities with the content of organic carbon is an important task for the characterization of the reservoir properties of a black shale formation. It is not possible without calibration but in combination with a full 2D tomographic image of the subsurface it gives the subsurface distribution of the organic material. The S-wave model obtained with surface wave inversion of the vibroseis data of one of the profiles images the Alum Shale layer also very well with S-wave velocities around 2 km/s. Although individual 1D velocity models for each of the source positions were determined, the subsurface S-wave velocity distribution is very uniform with a good match between the single models. A really new approach described here is the application of seismic interferometry to a really small study area and a quite short time interval. Also new is the selective procedure of only using time windows with the best crosscorrelation signals to achieve the final interferograms. Due to the small scale of the interferometry even P-wave signals can be observed in the final crosscorrelations. In the laboratory measurements the seismic body waves were recorded for different pressure and temperature stages. Therefore, samples of different depths of the Alum Shale were available from one of the scientific boreholes at the study location. The measured velocities have a high variance with changing pressure or temperature. Recordings with wave propagation both parallel and perpendicular to the bedding of the samples reveal a great amount of anisotropy for the P-wave velocity, whereas the S-wave velocity is almost independent of the wave direction. The calculated velocity ratio is also highly anisotropic with very low values for the perpendicular samples and very high values for the parallel ones. Interestingly, the laboratory velocities of the perpendicular samples are comparable to the velocities of the field experiments indicating that the field measurements are sensitive to wave propagation in vertical direction. The velocity ratio is also calculated with the P-wave and S-wave velocity models of the field experiments. Again, the Alum Shale can be clearly separated from the adjacent formations because it shows overall very low vP/vS ratios around 1.4. The very low velocity ratio indicates the content of gas in the black shale formation. With the combination of all the different methods described here, a comprehensive interpretation of the seismic response of the black shale layer can be made and the hydrocarbon source rock potential can be estimated.
The main intention of the PhD project was to create a varve chronology for the Suigetsu Varves 2006' (SG06) composite profile from Lake Suigetsu (Japan) by thin section microscopy. The chronology was not only to provide an age-scale for the various palaeo-environmental proxies analysed within the SG06 project, but also and foremost to contribute, in combination with the SG06 14C chronology, to the international atmospheric radiocarbon calibration curve (IntCal). The SG06 14C data are based on terrestrial leaf fossils and therefore record atmospheric 14C values directly, avoiding the corrections necessary for the reservoir ages of the marine datasets, which are currently used beyond the tree-ring limit in the IntCal09 dataset (Reimer et al., 2009). The SG06 project is a follow up of the SG93 project (Kitagawa & van der Plicht, 2000), which aimed to produce an atmospheric calibration dataset, too, but suffered from incomplete core recovery and varve count uncertainties. For the SG06 project the complete Lake Suigetsu sediment sequence was recovered continuously, leaving the task to produce an improved varve count. Varve counting was carried out using a dual method approach utilizing thin section microscopy and micro X-Ray Fluorescence (µXRF). The latter was carried out by Dr. Michael Marshall in cooperation with the PhD candidate. The varve count covers 19 m of composite core, which corresponds to the time frame from ≈10 to ≈40 kyr BP. The count result showed that seasonal layers did not form in every year. Hence, the varve counts from either method were incomplete. This rather common problem in varve counting is usually solved by manual varve interpolation. But manual interpolation often suffers from subjectivity. Furthermore, sedimentation rate estimates (which are the basis for interpolation) are generally derived from neighbouring, well varved intervals. This assumes that the sedimentation rates in neighbouring intervals are identical to those in the incompletely varved section, which is not necessarily true. To overcome these problems a novel interpolation method was devised. It is computer based and automated (i.e. avoids subjectivity and ensures reproducibility) and derives the sedimentation rate estimate directly from the incompletely varved interval by statistically analysing distances between successive seasonal layers. Therefore, the interpolation approach is also suitable for sediments which do not contain well varved intervals. Another benefit of the novel method is that it provides objective interpolation error estimates. Interpolation results from the two counting methods were combined and the resulting chronology compared to the 14C chronology from Lake Suigetsu, calibrated with the tree-ring derived section of IntCal09 (which is considered accurate). The varve and 14C chronology showed a high degree of similarity, demonstrating that the novel interpolation method produces reliable results. In order to constrain the uncertainties of the varve chronology, especially the cumulative error estimates, U-Th dated speleothem data were used by linking the low frequency 14C signal of Lake Suigetsu and the speleothems, increasing the accuracy and precision of the Suigetsu calibration dataset. The resulting chronology also represents the age-scale for the various palaeo-environmental proxies analysed in the SG06 project. One proxy analysed within the PhD project was the distribution of event layers, which are often representatives of past floods or earthquakes. A detailed microfacies analysis revealed three different types of event layers, two of which are described here for the first time for the Suigetsu sediment. The types are: matrix supported layers produced as result of subaqueous slope failures, turbidites produced as result of landslides and turbidites produced as result of flood events. The former two are likely to have been triggered by earthquakes. The vast majority of event layers was related to floods (362 out of 369), which allowed the construction of a respective chronology for the last 40 kyr. Flood frequencies were highly variable, reaching their greatest values during the global sea level low-stand of the Glacial, their lowest values during Heinrich Event 1. Typhoons affecting the region represent the most likely control on the flood frequency, especially during the Glacial. However, also local, non-climatic controls are suggested by the data. In summary, the work presented here expands and revises knowledge on the Lake Suigetsu sediment and enabls the construction of a far more precise varve chronology. The 14C calibration dataset is the first such derived from lacustrine sediments to be included into the (next) IntCal dataset. References: Kitagawa & van der Plicht, 2000, Radiocarbon, Vol 42(3), 370-381 Reimer et al., 2009, Radiocarbon, Vol 51(4), 1111-1150
Water management and environmental protection is vulnerable to extreme low flows during streamflow droughts. During the last decades, in most rivers of Central Europe summer runoff and low flows have decreased. Discharge projections agree that future decrease in runoff is likely for catchments in Brandenburg, Germany. Depending on the first-order controls on low flows, different adaption measures are expected to be appropriate. Small catchments were analyzed because they are expected to be more vulnerable to a changing climate than larger rivers. They are mainly headwater catchments with smaller ground water storage. Local characteristics are more important at this scale and can increase vulnerability. This thesis mutually evaluates potential adaption measures to sustain minimum runoff in small catchments of Brandenburg, Germany, and similarities of these catchments regarding low flows. The following guiding questions are addressed: (i) Which first-order controls on low flows and related time scales exist? (ii) Which are the differences between small catchments regarding low flow vulnerability? (iii) Which adaption measures to sustain minimum runoff in small catchments of Brandenburg are appropriate considering regional low flow patterns? Potential adaption measures to sustain minimum runoff during periods of low flows can be classified into three categories: (i) increase of groundwater recharge and subsequent baseflow by land use change, land management and artificial ground water recharge, (ii) increase of water storage with regulated outflow by reservoirs, lakes and wetland water management and (iii) regional low flow patterns have to be considered during planning of measures with multiple purposes (urban water management, waste water recycling and inter-basin water transfer). The question remained whether water management of areas with shallow groundwater tables can efficiently sustain minimum runoff. Exemplary, water management scenarios of a ditch irrigated area were evaluated using the model Hydrus-2D. Increasing antecedent water levels and stopping ditch irrigation during periods of low flows increased fluxes from the pasture to the stream, but storage was depleted faster during the summer months due to higher evapotranspiration. Fluxes from this approx. 1 km long pasture with an area of approx. 13 ha ranged from 0.3 to 0.7 l\s depending on scenario. This demonstrates that numerous of such small decentralized measures are necessary to sustain minimum runoff in meso-scale catchments. Differences in the low flow risk of catchments and meteorological low flow predictors were analyzed. A principal component analysis was applied on daily discharge of 37 catchments between 1991 and 2006. Flows decreased more in Southeast Brandenburg according to meteorological forcing. Low flow risk was highest in a region east of Berlin because of intersection of a more continental climate and the specific geohydrology. In these catchments, flows decreased faster during summer and the low flow period was prolonged. A non-linear support vector machine regression was applied to iteratively select meteorological predictors for annual 30-day minimum runoff in 16 catchments between 1965 and 2006. The potential evapotranspiration sum of the previous 48 months was the most important predictor (r²=0.28). The potential evapotranspiration of the previous 3 months and the precipitation of the previous 3 months and last year increased model performance (r²=0.49, including all four predictors). Model performance was higher for catchments with low yield and more damped runoff. In catchments with high low flow risk, explanatory power of long term potential evapotranspiration was high. Catchments with a high low flow risk as well as catchments with a considerable decrease in flows in southeast Brandenburg have the highest demand for adaption. Measures increasing groundwater recharge are to be preferred. Catchments with high low flow risk showed relatively deep and decreasing groundwater heads allowing increased groundwater recharge at recharge areas with higher altitude away from the streams. Low flows are expected to stay low or decrease even further because long term potential evapotranspiration was the most important low flow predictor and is projected to increase during climate change. Differences in low flow risk and runoff dynamics between catchments have to be considered for management and planning of measures which do not only have the task to sustain minimum runoff.
Even though quite different in occurrence and consequences, from a modeling perspective many natural hazards share similar properties and challenges. Their complex nature as well as lacking knowledge about their driving forces and potential effects make their analysis demanding: uncertainty about the modeling framework, inaccurate or incomplete event observations and the intrinsic randomness of the natural phenomenon add up to different interacting layers of uncertainty, which require a careful handling. Nevertheless deterministic approaches are still widely used in natural hazard assessments, holding the risk of underestimating the hazard with disastrous effects. The all-round probabilistic framework of Bayesian networks constitutes an attractive alternative. In contrast to deterministic proceedings, it treats response variables as well as explanatory variables as random variables making no difference between input and output variables. Using a graphical representation Bayesian networks encode the dependency relations between the variables in a directed acyclic graph: variables are represented as nodes and (in-)dependencies between variables as (missing) edges between the nodes. The joint distribution of all variables can thus be described by decomposing it, according to the depicted independences, into a product of local conditional probability distributions, which are defined by the parameters of the Bayesian network. In the framework of this thesis the Bayesian network approach is applied to different natural hazard domains (i.e. seismic hazard, flood damage and landslide assessments). Learning the network structure and parameters from data, Bayesian networks reveal relevant dependency relations between the included variables and help to gain knowledge about the underlying processes. The problem of Bayesian network learning is cast in a Bayesian framework, considering the network structure and parameters as random variables itself and searching for the most likely combination of both, which corresponds to the maximum a posteriori (MAP score) of their joint distribution given the observed data. Although well studied in theory the learning of Bayesian networks based on real-world data is usually not straight forward and requires an adoption of existing algorithms. Typically arising problems are the handling of continuous variables, incomplete observations and the interaction of both. Working with continuous distributions requires assumptions about the allowed families of distributions. To "let the data speak" and avoid wrong assumptions, continuous variables are instead discretized here, thus allowing for a completely data-driven and distribution-free learning. An extension of the MAP score, considering the discretization as random variable as well, is developed for an automatic multivariate discretization, that takes interactions between the variables into account. The discretization process is nested into the network learning and requires several iterations. Having to face incomplete observations on top, this may pose a computational burden. Iterative proceedings for missing value estimation become quickly infeasible. A more efficient albeit approximate method is used instead, estimating the missing values based only on the observations of variables directly interacting with the missing variable. Moreover natural hazard assessments often have a primary interest in a certain target variable. The discretization learned for this variable does not always have the required resolution for a good prediction performance. Finer resolutions for (conditional) continuous distributions are achieved with continuous approximations subsequent to the Bayesian network learning, using kernel density estimations or mixtures of truncated exponential functions. All our proceedings are completely data-driven. We thus avoid assumptions that require expert knowledge and instead provide domain independent solutions, that are applicable not only in other natural hazard assessments, but in a variety of domains struggling with uncertainties.
Climatic variations and human activity now and increasingly in the future cause land cover changes and introduce perturbations in the terrestrial carbon reservoirs in vegetation, soil and detritus. Optical remote sensing and in particular Imaging Spectroscopy has shown the potential to quantify land surface parameters over large areas, which is accomplished by taking advantage of the characteristic interactions of incident radiation and the physico-chemical properties of a material. The objective of this thesis is to quantify key soil parameters, including soil organic carbon, using field and Imaging Spectroscopy. Organic carbon, iron oxides and clay content are selected to be analyzed to provide indicators for ecosystem function in relation to land degradation, and additionally to facilitate a quantification of carbon inventories in semiarid soils. The semiarid Albany Thicket Biome in the Eastern Cape Province of South Africa is chosen as study site. It provides a regional example for a semiarid ecosystem that currently undergoes land changes due to unadapted management practices and furthermore has to face climate change induced land changes in the future. The thesis is divided in three methodical steps. Based on reflectance spectra measured in the field and chemically determined constituents of the upper topsoil, physically based models are developed to quantify soil organic carbon, iron oxides and clay content. Taking account of the benefits limitations of existing methods, the approach is based on the direct application of known diagnostic spectral features and their combination with multivariate statistical approaches. It benefits from the collinearity of several diagnostic features and a number of their properties to reduce signal disturbances by influences of other spectral features. In a following step, the acquired hyperspectral image data are prepared for an analysis of soil constituents. The data show a large spatial heterogeneity that is caused by the patchiness of the natural vegetation in the study area that is inherent to most semiarid landscapes. Spectral mixture analysis is performed and used to deconvolve non-homogenous pixels into their constituent components. For soil dominated pixels, the subpixel information is used to remove the spectral influence of vegetation and to approximate the pure spectral signature coming from the soil. This step is an integral part when working in natural non-agricultural areas where pure bare soil pixels are rare. It is identified as the largest benefit within the multi-stage methodology, providing the basis for a successful and unbiased prediction of soil constituents from hyperspectral imagery. With the proposed approach it is possible (1) to significantly increase the spatial extent of derived information of soil constituents to areas with about 40 % vegetation coverage and (2) to reduce the influence of materials such as vegetation on the quantification of soil constituents to a minimum. Subsequently, soil parameter quantities are predicted by the application of the feature-based soil prediction models to the maps of locally approximated soil signatures. Thematic maps showing the spatial distribution of the three considered soil parameters in October 2009 are produced for the Albany Thicket Biome of South Africa. The maps are evaluated for their potential to detect erosion affected areas as effects of land changes and to identify degradation hot spots in regard to support local restoration efforts. A regional validation, carried out using available ground truth sites, suggests remaining factors disturbing the correlation of spectral characteristics and chemical soil constituents. The approach is developed for semiarid areas in general and not adapted to specific conditions in the study area. All processing steps of the developed methodology are implemented in software modules, where crucial steps of the workflow are fully automated. The transferability of the methodology is shown for simulated data of the future EnMAP hyperspectral satellite. Soil parameters are successfully predicted from these data despite intense spectral mixing within the lower spatial resolution EnMAP pixels. This study shows an innovative approach to use Imaging Spectroscopy for mapping of key soil constituents, including soil organic carbon, for large areas in a non-agricultural ecosystem and under consideration of a partially vegetation coverage. It can contribute to a better assessment of soil constituents that describe ecosystem processes relevant to detect and monitor land changes. The maps further provide an assessment of the current carbon inventory in soils, valuable for carbon balances and carbon mitigation products.
The study of outcrop modeling is located at the interface between two fields of expertise, Sedimentology and Computing Geoscience, which respectively investigates and simulates geological heterogeneity observed in the sedimentary record. During the last past years, modeling tools and techniques were constantly improved. In parallel, the study of Phanerozoic carbonate deposits emphasized the common occurrence of a random facies distribution along single depositional domain. Although both fields of expertise are intrinsically linked during outcrop simulation, their respective advances have not been combined in literature to enhance carbonate modeling studies. The present study re-examines the modeling strategy adapted to the simulation of shallow-water carbonate systems, based on a close relationship between field sedimentology and modeling capabilities. In the present study, the evaluation of three commonly used algorithms Truncated Gaussian Simulation (TGSim), Sequential Indicator Simulation (SISim), and Indicator Kriging (IK), were performed for the first time using visual and quantitative comparisons on an ideally suited carbonate outcrop. The results show that the heterogeneity of carbonate rocks cannot be fully simulated using one single algorithm. The operating mode of each algorithm involves capabilities as well as drawbacks that are not capable to match all field observations carried out across the modeling area. Two end members in the spectrum of carbonate depositional settings, a low-angle Jurassic ramp (High Atlas, Morocco) and a Triassic isolated platform (Dolomites, Italy), were investigated to obtain a complete overview of the geological heterogeneity in shallow-water carbonate systems. Field sedimentology and statistical analysis performed on the type, morphology, distribution, and association of carbonate bodies and combined with palaeodepositional reconstructions, emphasize similar results. At the basin scale (x 1 km), facies association, composed of facies recording similar depositional conditions, displays linear and ordered transitions between depositional domains. Contrarily, at the bedding scale (x 0.1 km), individual lithofacies type shows a mosaic-like distribution consisting of an arrangement of spatially independent lithofacies bodies along the depositional profile. The increase of spatial disorder from the basin to bedding scale results from the influence of autocyclic factors on the transport and deposition of carbonate sediments. Scale-dependent types of carbonate heterogeneity are linked with the evaluation of algorithms in order to establish a modeling strategy that considers both the sedimentary characteristics of the outcrop and the modeling capabilities. A surface-based modeling approach was used to model depositional sequences. Facies associations were populated using TGSim to preserve ordered trends between depositional domains. At the lithofacies scale, a fully stochastic approach with SISim was applied to simulate a mosaic-like lithofacies distribution. This new workflow is designed to improve the simulation of carbonate rocks, based on the modeling of each scale of heterogeneity individually. Contrarily to simulation methods applied in literature, the present study considers that the use of one single simulation technique is unlikely to correctly model the natural patterns and variability of carbonate rocks. The implementation of different techniques customized for each level of the stratigraphic hierarchy provides the essential computing flexibility to model carbonate systems. Closer feedback between advances carried out in the field of Sedimentology and Computing Geoscience should be promoted during future outcrop simulations for the enhancement of 3-D geological models.
Intra-continental mountain belts typically form as a result of tectonic forces associated with distant plate collisions. In general, each mountain belt has a distinctive morphology and orogenic evolution that is highly dependent on the unique distribution and geometries of inherited structures and other crustal weaknesses. In this thesis, I have investigated the complex and irregular Cenozoic orogenic evolution of the Central Kyrgyz Tien Shan in Central Asia, which is presently one of the most active intra-continental mountain belts in the world. This work involved combining a broad array of datasets, including thermochronologic, magnetostratigraphic, sediment provenance and stable isotope data, to identify and date various changes in tectonic deformation, climate and surface processes. Many of these changes are linked and can ultimately be related to regional-scale processes that altered the orogenic evolution of the Central Kyrgyz Tien Shan. The Central Kyrgyz Tien Shan contains a sub-parallel series of structures that were reactivated in the late Cenozoic in response to the tectonic forces associated with the distant India-Eurasia collision. Over time, slip on the various reactivated structures created the succession of mountain ranges and intermontane basins which characterises the modern morphology of the region. In this thesis, new quantitative constraints on the exhumation histories of several mountain ranges have been obtained by using low temperature thermochronological data from 95 samples (zircon (U-Th)/He, apatite fission track and (U-Th)/He). Time-temperature histories derived by modelling the thermochronologic data of individual samples identify at least two stages of Cenozoic cooling in most of the region’s mountain ranges: (1) initially low cooling rates (<1°C/Myr) during the tectonic quiescent period and (2) increased cooling in the late Cenozoic, which occurred diachronously and with variable magnitude in different ranges. This second cooling stage is interpreted to represent increased erosion caused by active deformation, and in many of the sampled mountain ranges, provides the first available constraints on the timing of late Cenozoic deformation. New constraints on the timing of deformation have also been derived from the sedimentary record of intermontane basins. In the intermontane Issyk Kul basin, new magnetostratigraphic data from two sedimentary sections suggests that deposition of the first Cenozoic syn-tectonic sediments commenced at ~26 Ma. Zircon U-Pb provenance data, paleocurrent and conglomerate clast analysis reveals that these sediments were sourced from the Terskey Range to the south of the basin, suggesting that the onset of the late Cenozoic deformation occurred >26 Ma in that particular range. Elsewhere, growth strata relationships are used to identify syn-tecotnic deposition and constrain the timing of nearby deformation. Collectively, these new constraints obtained from thermochronologic and sedimentary data have allowed me to infer the spatiotemporal distribution of deformation in a transect through the Central Kyrgyz Tien Shan, and determine the order in which mountain ranges started deforming. These data suggest that deformation began in a few widely-spaced mountain ranges in the late Oligocene and early Miocene. Typically, these earlier mountain ranges are bounded on at least one side by a reactivated structure, which probably corresponds to the frictionally weakest and most suitably orientated inherited structures for accommodating the roughly north-south directed horizontal crustal shortening of the late Cenozoic. Moreover, tectonically-induced rock uplift in the Terskey Range, following the reactivation of the bounding structure before 26 Ma, likely caused significant surface uplift across the range, which in turn lead to enhanced orographic precipitation. These wetter conditions have been inferred from stable isotope data collected in the two magnetostratigraphically-dated sections in the Issyk Kul basin. Subsequently, in the late Miocene (~12‒5 Ma), more mountain ranges and inherited structures appear to have started actively deforming. Importantly, the onset of deformation at these locations in the late Miocene coincides with an increase in exhumation of ranges that had started deforming earlier in the late Oligocene‒early Miocene. Based on this observation, I have suggested that there must have been an overall increase in the rate of horizontal crustal shortening across the Central Kyrgyz Tien Shan, which likely relates to regional tectonic changes that affected much of Central Asia. Many of the mountain ranges that started deforming in the late Miocene were associated with out-of-sequence tectonic reactivation and initiation, which lead to the partitioning of larger intermontane basins. Moreover, within most of the intermontane basins in the Central Kyrgyz Tien Shan, this inferred late Miocene increase in horizontal crustal shortening occurs roughly at the same time as an increase in sedimentation rates and a significant change sediment composition. Therefore, I have suggested that the overall magnitude of deformational processes increased in the late Miocene, promoting more flexural subsidence in the intermontane basins of the Central Kyrgyz Tien Shan.
Die Anpassung von Sektoren an veränderte klimatische Bedingungen erfordert ein Verständnis von regionalen Vulnerabilitäten. Vulnerabilität ist als Funktion von Sensitivität und Exposition, welche potentielle Auswirkungen des Klimawandels darstellen, und der Anpassungsfähigkeit von Systemen definiert. Vulnerabilitätsstudien, die diese Komponenten quantifizieren, sind zu einem wichtigen Werkzeug in der Klimawissenschaft geworden. Allerdings besteht von der wissenschaftlichen Perspektive aus gesehen Uneinigkeit darüber, wie diese Definition in Studien umgesetzt werden soll. Ausdiesem Konflikt ergeben sich viele Herausforderungen, vor allem bezüglich der Quantifizierung und Aggregierung der einzelnen Komponenten und deren angemessenen Komplexitätsniveaus. Die vorliegende Dissertation hat daher zum Ziel die Anwendbarkeit des Vulnerabilitätskonzepts voranzubringen, indem es in eine systematische Struktur übersetzt wird. Dies beinhaltet alle Komponenten und schlägt für jede Klimaauswirkung (z.B. Sturzfluten) eine Beschreibung des vulnerablen Systems vor (z.B. Siedlungen), welches direkt mit einer bestimmten Richtung eines relevanten klimatischen Stimulus in Verbindung gebracht wird (z.B. stärkere Auswirkungen bei Zunahme der Starkregentage). Bezüglich der herausfordernden Prozedur der Aggregierung werden zwei alternative Methoden, die einen sektorübergreifenden Überblick ermöglichen, vorgestellt und deren Vor- und Nachteile diskutiert. Anschließend wird die entwickelte Struktur einer Vulnerabilitätsstudie mittels eines indikatorbasierten und deduktiven Ansatzes beispielhaft für Gemeinden in Nordrhein-Westfalen in Deutschland angewandt. Eine Übertragbarkeit auf andere Regionen ist dennoch möglich. Die Quantifizierung für die Gemeinden stützt sich dabei auf Informationen aus der Literatur. Da für viele Sektoren keine geeigneten Indikatoren vorhanden waren, werden in dieser Arbeit neue Indikatoren entwickelt und angewandt, beispielsweise für den Forst- oder Gesundheitssektor. Allerdings stellen fehlende empirische Daten bezüglich relevanter Schwellenwerte eine Lücke dar, beispielsweise welche Stärke von Klimaänderungen eine signifikante Auswirkung hervorruft. Dies führt dazu, dass die Studie nur relative Aussagen zum Grad der Vulnerabilität jeder Gemeinde im Vergleich zum Rest des Bundeslandes machen kann. Um diese Lücke zu füllen, wird für den Forstsektor beispielhaft die heutige und zukünftige Sturmwurfgefahr von Wäldern berechnet. Zu diesem Zweck werden die Eigenschaften der Wälder mit empirischen Schadensdaten eines vergangenen Sturmereignisses in Verbindung gebracht. Der sich daraus ergebende Sensitivitätswert wird anschließend mit den Windverhältnissen verknüpft. Sektorübergreifende Vulnerabilitätsstudien erfordern beträchtliche Ressourcen, was oft deren Anwendbarkeit erschwert. In einem nächsten Schritt wird daher das Potential einer Vereinfachung der Komplexität anhand zweier sektoraler Beispiele untersucht. Um das Auftreten von Waldbränden vorherzusagen, stehen zahlreiche meteorologische Indices zur Verfügung, welche eine Spannbreite unterschiedlicher Komplexitäten aufweisen. Bezüglich der Anzahl monatlicher Waldbrände weist die relative Luftfeuchtigkeit für die meisten deutschen Bundesländer eine bessere Vorhersagekraft als komplexere Indices auf. Dies ist er Fall, obgleich sie selbst als Eingangsvariable für die komplexeren Indices verwendet wird. Mit Hilfe dieses einzelnen meteorologischen Faktors kann also die Waldbrandgefahr in deutschen Region ausreichend genau ausgedrückt werden, was die Ressourceneffizienz von Studien erhöht. Die Methodenkomplexität wird auf ähnliche Weise hinsichtlich der Anwendung des ökohydrologischen Modells SWIM für die Region Brandenburg untersucht. Die interannuellen Bodenwasserwerte, welche durch dieses Modell simuliert werden, können nur unzureichend durch ein einfacheres statistisches Modell, welches auf denselben Eingangsdaten aufbaut, abgebildet werden. Innerhalb eines Zeithorizonts von Jahrzehnten, kann der statistische Ansatz jedoch das Bodenwasser zufriedenstellend abbilden und zeigt eine Dominanz der Bodeneigenschaft Feldkapazität. Dies deutet darauf hin, dass die Komplexität im Hinblick auf die Anzahl der Eingangsvariablen für langfristige Berechnungen reduziert werden kann. Allerdings sind die Aussagen durch fehlende beobachtete Bodenwasserwerte zur Validierung beschränkt. Die vorliegenden Studien zur Vulnerabilität und ihren Komponenten haben gezeigt, dass eine Anwendung noch immer wissenschaftlich herausfordernd ist. Folgt man der hier verwendeten Vulnerabilitätsdefinition, treten zahlreiche Probleme bei der Implementierung in regionalen Studien auf. Mit dieser Dissertation wurden Fortschritte bezüglich der aufgezeigten Lücken bisheriger Studien erzielt, indem eine systematische Struktur für die Beschreibung und Aggregierung von Vulnerabilitätskomponenten erarbeitet wurde. Hierfür wurden mehrere Ansätze diskutiert, die jedoch Vor- und Nachteile besitzen. Diese sollten vor der Anwendung von zukünftigen Studien daher ebenfalls sorgfältig abgewogen werden. Darüber hinaus hat sich gezeigt, dass ein Potential besteht einige Ansätze zu vereinfachen, jedoch sind hierfür weitere Untersuchungen nötig. Insgesamt konnte die Dissertation die Anwendung von Vulnerabilitätsstudien als Werkzeug zur Unterstützung von Anpassungsmaßnahmen stärken.
The surface heat flow (qs) is paramount for modeling the thermal structure of the lithosphere. Changes in the qs over a distinct lithospheric unit are normally directly reflecting changes in the crustal composition and therewith the radiogenic heat budget (e.g., Rudnick et al., 1998; Förster and Förster, 2000; Mareschal and Jaupart, 2004; Perry et al., 2006; Hasterok and Chapman, 2011, and references therein) or, less usual, changes in the mantle heat flow (e.g., Pollack and Chapman, 1977). Knowledge of this physical property is therefore of great interest for both academic research and the energy industry. The present study focuses on the qs of central and southern Israel as part of the Sinai Microplate (SM). Having formed during Oligocene to Miocene rifting and break-up of the African and Arabian plates, the SM is characterized by a young and complex tectonic history. Resulting from the time thermal diffusion needs to pass through the lithosphere, on the order of several tens-of-millions of years (e.g., Fowler, 1990); qs-values of the area reflect conditions of pre-Oligocene times. The thermal structure of the lithosphere beneath the SM in general, and south-central Israel in particular, has remained poorly understood. To address this problem, the two parameters needed for the qs determination were investigated. Temperature measurements were made at ten pre-existing oil and water exploration wells, and the thermal conductivity of 240 drill core and outcrop samples was measured in the lab. The thermal conductivity is the sensitive parameter in this determination. Lab measurements were performed on both, dry and water-saturated samples, which is labor- and time-consuming. Another possibility is the measurement of thermal conductivity in dry state and the conversion to a saturated value by using mean model approaches. The availability of a voluminous and diverse dataset of thermal conductivity values in this study allowed (1) in connection with the temperature gradient to calculate new reliable qs values and to use them to model the thermal pattern of the crust in south-central Israel, prior to young tectonic events, and (2) in connection with comparable datasets, controlling the quality of different mean model approaches for indirect determination of bulk thermal conductivity (BTC) of rocks. The reliability of numerically derived BTC values appears to vary between different mean models, and is also strongly dependent upon sample lithology. Yet, correction algorithms may significantly reduce the mismatch between measured and calculated conductivity values based on the different mean models. Furthermore, the dataset allowed the derivation of lithotype-specific conversion equations to calculate the water-saturated BTC directly from data of dry-measured BTC and porosity (e.g., well log derived porosity) with no use of any mean model and thus provide a suitable tool for fast analysis of large datasets. The results of the study indicate that the qs in the study area is significantly higher than previously assumed. The new presented qs values range between 50 and 62 mW m⁻². A weak trend of decreasing heat flow can be identified from the east to the west (55-50 mW m⁻²), and an increase from the Dead Sea Basin to the south (55-62 mW m⁻²). The observed range can be explained by variation in the composition (heat production) of the upper crust, accompanied by more systematic spatial changes in its thickness. The new qs data then can be used, in conjunction with petrophysical data and information on the structure and composition of the lithosphere, to adjust a model of the pre-Oligocene thermal state of the crust in south-central Israel. The 2-D steady-state temperature model was calculated along an E-W traverse based on the DESIRE seismic profile (Mechie et al., 2009). The model comprises the entire lithosphere down to the lithosphere–asthenosphere boundary (LAB) involving the most recent knowledge of the lithosphere in pre-Oligocene time, i.e., prior to the onset of rifting and plume-related lithospheric thermal perturbations. The adjustment of modeled and measured qs allows conclusions about the pre-Oligocene LAB-depth. After the best fitting the most likely depth is 150 km which is consistent with estimations made in comparable regions of the Arabian Shield. It therefore comprises the first ever modelled pre-Oligocene LAB depth, and provides important clues on the thermal state of lithosphere before rifting. This, in turn, is vital for a better understanding of the (thermo)-dynamic processes associated with lithosphere extension and continental break-up.
Large areas in the humid tropics are currently undergoing land-use change. The decrease of tropical rainforest, which is felled for land clearing and timber production, is countered by increasing areas of tree plantations and secondary forests. These changes are known to affect the regional water cycle as a result of plant-specific water demand and by influencing key soil properties which determine hydrological flow paths. One of these key properties sensitive to land-use change is the saturated hydraulic conductivity (Ks) as it governs vertical percolation of water within the soil profile. Low values of Ks in a certain soil depth can form an impeding layer and lead to perched water tables and the development of predominantly lateral flow paths such as overland flow. These processes can induce nutrient redistribution, erosion and soil degradation and thus affect ecosystem services and human livelihoods. Due to its sensitivity to land-use change, Ks is commonly used to assess the associated changes in hydrological flow paths. The objective of this dissertation was to assess the effect of land-use change on hydrological flow paths by analysing Ks as indicator variable. Sources of Ks variability, their implications for Ks monitoring and the relationship between Ks and near-surface hydrological flow paths in the context of land-use change were studied. The research area was located in central Panama, a country widely experiencing the abovementioned changes in land use. Ks is dependent on both static, soil-inherent properties such as particle size and clay mineralogy and dynamic, land use-dependent properties such as organic carbon content. By conducting a pair of studies with one of these influences held constant in each, the importance of static and dynamic properties for Ks was assessed. Applying a space-for-time approach to sample Ks under secondary forests of different age classes on comparable soils, a recovery of Ks from the former pasture use was shown to require more than eight years. The process was limited to the 0−6 cm sampling depth and showed large variability among replicates. A wavelet analysis of a Ks transect crossing different soil map units under comparable land cover, old-growth tropical rainforest, showed large small-scale variability, which was attributed to biotic influences, as well as a possible but non-conclusive influence of soil types. The two results highlight the importance of dynamic, land use-dependent influences on Ks. Monitoring studies can help to quantify land use-induced change of Ks, but there is a variety of sampling designs which differ in efficiency of estimating mean Ks. A comparative study of four designs and their suitability for Ks monitoring is used to give recommendations about designing a Ks monitoring scheme. Quantifying changes in spatial means of Ks for small catchments with a rotational stratified sampling design did not prove to be more efficient than Simple Random Sampling. The lack of large-scale spatial structure prevented benefits of stratification, and large small-scale variability resulting from local biotic processes and artificial effects of destructive sampling caused a lack of temporal consistency in the re-sampling of locations, which is part of the rotational design. The relationship between Ks and near-surface hydrological flow paths is of critical importance when assessing the consequences of land-use change in the humid tropics. The last part of this dissertation aimed at disclosing spatial relationships between Ks and overland flow as influenced by different land cover types. The effects of Ks on overland-flow generation were spatially variable, different between planar plots and incised flowlines and strongly influenced by land-cover characteristics. A simple comparison of Ks values and rainfall intensities was insufficient to describe the observed pattern of overland flow. Likewise, event flow in the stream was apparently not directly related to overland flow response patterns within the catchments. The study emphasises the importance of combining pedological, hydrological, meteorological and botanical measurements to comprehensively understand the land use-driven change in hydrological flow paths. In summary, Ks proved to be a suitable parameter for assessing the influence of land-use change on soils and hydrological processes. The results illustrated the importance of land cover and spatial variability of Ks for decisions on sampling designs and for interpreting overland-flow generation. As relationships between Ks and overland flow were shown to be complex and dependent on land cover, an interdisciplinary approach is required to comprehensively understand the effects of land-use change on soils and near-surface hydrological flow paths in the humid tropics.
In sedimentary basins, rock thermal conductivity can vary both laterally and vertically, thus altering the basin’s thermal structure locally and regionally. Knowledge of the thermal conductivity of geological formations and its spatial variations is essential, not only for quantifying basin evolution and hydrocarbon maturation processes, but also for understanding geothermal conditions in a geological setting. In conjunction with the temperature gradient, thermal conductivity represents the basic input parameter for the determination of the heat-flow density; which, in turn, is applied as a major input parameter in thermal modeling at different scales. Drill-core samples, which are necessary to determine thermal properties by laboratory measurements, are rarely available and often limited to previously explored reservoir formations. Thus, thermal conductivities of Mesozoic rocks in the North German Basin (NGB) are largely unknown. In contrast, geophysical borehole measurements are often available for the entire drilled sequence. Therefore, prediction equations to determine thermal conductivity based on well-log data are desirable. In this study rock thermal conductivity was investigated on different scales by (1) providing thermal-conductivity measurements on Mesozoic rocks, (2) evaluating and improving commonly applied mixing models which were used to estimate matrix and pore-filled rock thermal conductivities, and (3) developing new well-log based equations to predict thermal conductivity in boreholes without core control. Laboratory measurements are performed on sedimentary rock of major geothermal reservoirs in the Northeast German Basin (NEGB) (Aalenian, Rhaethian-Liassic, Stuttgart Fm., and Middle Buntsandstein). Samples are obtained from eight deep geothermal wells that approach depths of up to 2,500 m. Bulk thermal conductivities of Mesozoic sandstones range between 2.1 and 3.9 W/(m∙K), while matrix thermal conductivity ranges between 3.4 and 7.4 W/(m∙K). Local heat flow for the Stralsund location averages 76 mW/m², which is in good agreement to values reported previously for the NEGB. For the first time, in-situ bulk thermal conductivity is indirectly calculated for entire borehole profiles in the NEGB using the determined surface heat flow and measured temperature data. Average bulk thermal conductivity, derived for geological formations within the Mesozoic section, ranges between 1.5 and 3.1 W/(m∙K). The measurement of both dry- and water-saturated thermal conductivities allow further evaluation of different two-component mixing models which are often applied in geothermal calculations (e.g., arithmetic mean, geometric mean, harmonic mean, Hashin-Shtrikman mean, and effective-medium theory mean). It is found that the geometric-mean model shows the best correlation between calculated and measured bulk thermal conductivity. However, by applying new model-dependent correction, equations the quality of fit could be significantly improved and the error diffusion of each model reduced. The ‘corrected’ geometric mean provides the most satisfying results and constitutes a universally applicable model for sedimentary rocks. Furthermore, lithotype-specific and model-independent conversion equations are developed permitting a calculation of water-saturated thermal conductivity from dry-measured thermal conductivity and porosity within an error range of 5 to 10%. The limited availability of core samples and the expensive core-based laboratory measurements make it worthwhile to use petrophysical well logs to determine thermal conductivity for sedimentary rocks. The approach followed in this study is based on the detailed analyses of the relationships between thermal conductivity of rock-forming minerals, which are most abundant in sedimentary rocks, and the properties measured by standard logging tools. By using multivariate statistics separately for clastic, carbonate and evaporite rocks, the findings from these analyses allow the development of prediction equations from large artificial data sets that predict matrix thermal conductivity within an error of 4 to 11%. These equations are validated successfully on a comprehensive subsurface data set from the NGB. In comparison to the application of earlier published approaches formation-dependent developed for certain areas, the new developed equations show a significant error reduction of up to 50%. These results are used to infer rock thermal conductivity for entire borehole profiles. By inversion of corrected in-situ thermal-conductivity profiles, temperature profiles are calculated and compared to measured high-precision temperature logs. The resulting uncertainty in temperature prediction averages < 5%, which reveals the excellent temperature prediction capabilities using the presented approach. In conclusion, data and methods are provided to achieve a much more detailed parameterization of thermal models.
The evolution of most orogens typically records cogenetic shortening and extension. Pervasive normal faulting in an orogen, however, has been related to late syn- and post-collisional stages of mountain building with shortening focused along the peripheral sectors of the orogen. While extensional processes constitute an integral part of orogenic evolution, the spatiotemporal characteristics and the kinematic linkage of structures related to shortening and extension in the core regions of the orogen are often not well known. Related to the India-Eurasia collision, the Himalaya forms the southern margin of the Tibetan Plateau and constitutes the most prominent Cenozoic type example of a collisional orogen. While thrusting is presently observed along the foothills of the orogen, several generations of extensional structures have been detected in the internal, high-elevation regions, both oriented either parallel or perpendicular to the strike of the orogen. In the NW Indian Himalaya, earthquake focal mechanisms, seismites and ubiquitous normal faulting in Quaternary deposits, and regional GPS measurements reveal ongoing E-W extension. In contrast to other extensional structures observed in the Himalaya, this extension direction is neither parallel nor perpendicular to the NE-SW regional shortening direction. In this study, I took advantage of this obliquity between the trend of the orogen and structures related to E-W oriented extension in order to address the question of the driving forces of different extension directions. Thus, extension might be triggered triggered by processes within the Tibetan Plateau or originates from the curvature of the Himalayan orogen. In order to elaborate on this topic, I present new fault-kinematic data based on systematic measurements of approximately 2000 outcrop-scale brittle fault planes with displacements of up to several centimeters that cover a large area of the NW Indian Himalaya. This new data set together with field observations relevant for relative chronology allows me to distinguish six different deformation styles. One of the main results are that the overall strain pattern derived from this data reflects the regionally important contractional deformation pattern very well, but also reveals significant extensional deformation. In total, I was able to identify six deformation styles, most of which are temporally and spatially linked and represent protracted shortening, but also significant extensional directions. For example, this is the first data set where a succession of both, arc-normal and E-W extension have been documented in the Himalaya. My observations also furnish the basis for a detailed overview of the younger extensional deformation history in the NW Indian Himalaya. Field and remote-sensing based geomorphic analyses, and geochronologic 40Ar/39Ar data on synkinematic muscovites along normal faults help elucidate widespread E-W extension in the NW Indian Himalaya which must have started at approximately 14-16 Ma, if not earlier. In addition, I documented and mapped fault scarps in Quaternary sedimentary deposits using satellite imagery and field inspection. Furthermore, I made field observations of regional normal faults, compiled structures from geological maps and put them in a regional context. Finally, I documented seismites in lake sediments close to the currently most active normal fault in the study area in order to extend the (paleo) seismic record of this particular fault. Taken together, this data sets document that E-W extension is the dominant active deformation style in the internal parts of the orogen. In addition, the combined field, geomorphic and remote-sensing data sets prove that E-W extension occurs in a much more larger region toward the south and west than the seismicity data have suggested. In conclusion, the data presented here reveal the importance of extension in a region, which is still dominated by ongoing collision and shortening. The regional fault distribution and cross-cutting relationships suggest that extension parallel and perpendicular to the strike of the orogen are an integral part of the southward propagation of the active thrust front and the associated lateral growth of the Himalayan arc. In the light of a wide range of models proposed for extension in the Himalaya and the Tibetan plateau, I propose that E-W extension in the NW Indian Himalaya is transferred from the Tibetan Plateau due the inability of the Karakorum fault (KF) to adequately accommodate ongoing E-W extension on the Tibetan Plateau. Furthermore, in line with other observations from Tibet, the onset of E-W normal faulting in the NW Himalaya may also reflect the attainment of high topography in this region, which generated crustal stresses conducive to spatially extensive extension.
Metabolically active microbial communities are present in a wide range of subsurface environments. Techniques like enumeration of microbial cells, activity measurements with radiotracer assays and the analysis of porewater constituents are currently being used to explore the subsurface biosphere, alongside with molecular biological analyses. However, many of these techniques reach their detection limits due to low microbial activity and abundance. Direct measurements of microbial turnover not just face issues of insufficient sensitivity, they only provide information about a single specific process but in sediments many different process can occur simultaneously. Therefore, the development of a new technique to measure total microbial activity would be a major improvement. A new tritium-based hydrogenase-enzyme assay appeared to be a promising tool to quantify total living biomass, even in low activity subsurface environments. In this PhD project total microbial biomass and microbial activity was quantified in different subsurface sediments using established techniques (cell enumeration and pore water geochemistry) as well as a new tritium-based hydrogenase enzyme assay. By using a large database of our own cell enumeration data from equatorial Pacific and north Pacific sediments and published data it was shown that the global geographic distribution of subseafloor sedimentary microbes varies between sites by 5 to 6 orders of magnitude and correlates with the sedimentation rate and distance from land. Based on these correlations, global subseafloor biomass was estimated to be 4.1 petagram-C and ~0.6 % of Earth's total living biomass, which is significantly lower than previous estimates. Despite the massive reduction in biomass the subseafloor biosphere is still an important player in global biogeochemical cycles. To understand the relationship between microbial activity, abundance and organic matter flux into the sediment an expedition to the equatorial Pacific upwelling area and the north Pacific Gyre was carried out. Oxygen respiration rates in subseafloor sediments from the north Pacific Gyre, which are deposited at sedimentation rates of 1 mm per 1000 years, showed that microbial communities could survive for millions of years without fresh supply of organic carbon. Contrary to the north Pacific Gyre oxygen was completely depleted within the upper few millimeters to centimeters in sediments of the equatorial upwelling region due to a higher supply of organic matter and higher metabolic activity. So occurrence and variability of electron acceptors over depth and sites make the subsurface a complex environment for the quantification of total microbial activity. Recent studies showed that electron acceptor processes, which were previously thought to thermodynamically exclude each other can occur simultaneously. So in many cases a simple measure of the total microbial activity would be a better and more robust solution than assays for several specific processes, for example sulfate reduction rates or methanogenesis. Enzyme or molecular assays provide a more general approach as they target key metabolic compounds. Since hydrogenase enzymes are ubiquitous in microbes, the recently developed tritium-based hydrogenase radiotracer assay is applied to quantify hydrogenase enzyme activity as a parameter of total living cell activity. Hydrogenase enzyme activity was measured in sediments from different locations (Lake Van, Barents Sea, Equatorial Pacific and Gulf of Mexico). In sediment samples that contained nitrate, we found the lowest cell specific enzyme activity around 10^(-5) nmol H_(2) cell^(-1) d^(-1). With decreasing energy yield of the electron acceptor used, cell-specific hydrogenase activity increased and maximum values of up to 1 nmol H_(2) cell^(-1) d^(-1) were found in samples with methane concentrations of >10 ppm. Although hydrogenase activity cannot be converted directly into a turnover rate of a specific process, cell-specific activity factors can be used to identify specific metabolism and to quantify the metabolically active microbial population. In another study on sediments from the Nankai Trough microbial abundance and hydrogenase activity data show that both the habitat and the activity of subseafloor sedimentary microbial communities have been impacted by seismic activities. An increase in hydrogenase activity near the fault zone revealed that the microbial community was supplied with hydrogen as an energy source and that the microbes were specialized to hydrogen metabolism.
This cumulative dissertation explored the use of the detection of natural background of fast neutrons, the so-called cosmic-ray neutron sensing (CRS) approach to measure field-scale soil moisture in cropped fields. Primary cosmic rays penetrate the top atmosphere and interact with atmospheric particles. Such interaction results on a cascade of high-energy neutrons, which continue traveling through the atmospheric column. Finally, neutrons penetrate the soil surface and a second cascade is produced with the so-called secondary cosmic-ray neutrons (fast neutrons). Partly, fast neutrons are absorbed by hydrogen (soil moisture). Remaining neutrons scatter back to the atmosphere, where its flux is inversely correlated to the soil moisture content, therefore allowing a non-invasive indirect measurement of soil moisture. The CRS methodology is mainly evaluated based on a field study carried out on a farmland in Potsdam (Brandenburg, Germany) along three crop seasons with corn, sunflower and winter rye; a bare soil period; and two winter periods. Also, field monitoring was carried out in the Schaefertal catchment (Harz, Germany) for long-term testing of CRS against ancillary data. In the first experimental site, the CRS method was calibrated and validated using different approaches of soil moisture measurements. In a period with corn, soil moisture measurement at the local scale was performed at near-surface only, and in subsequent periods (sunflower and winter rye) sensors were placed in three depths (5 cm, 20 cm and 40 cm). The direct transfer of CRS calibration parameters between two vegetation periods led to a large overestimation of soil moisture by the CRS. Part of this soil moisture overestimation was attributed to an underestimation of the CRS observation depth during the corn period ( 5-10 cm), which was later recalculated to values between 20-40 cm in other crop periods (sunflower and winter rye). According to results from these monitoring periods with different crops, vegetation played an important role on the CRS measurements. Water contained also in crop biomass, above and below ground, produces important neutron moderation. This effect was accounted for by a simple model for neutron corrections due to vegetation. It followed crop development and reduced overall CRS soil moisture error for periods of sunflower and winter rye. In Potsdam farmland also inversely-estimated soil hydraulic parameters were determined at the field scale, using CRS soil moisture from the sunflower period. A modelling framework coupling HYDRUS-1D and PEST was applied. Subsequently, field-scale soil hydraulic properties were compared against local scale soil properties (modelling and measurements). Successful results were obtained here, despite large difference in support volume. Simple modelling framework emphasizes future research directions with CRS soil moisture to parameterize field scale models. In Schaefertal catchment, CRS measurements were verified using precipitation and evapotranspiration data. At the monthly resolution, CRS soil water storage was well correlated to these two weather variables. Also clearly, water balance could not be closed due to missing information from other compartments such as groundwater, catchment discharge, etc. In the catchment, the snow influence to natural neutrons was also evaluated. As also observed in Potsdam farmland, CRS signal was strongly influenced by snow fall and snow accumulation. A simple strategy to measure snow was presented for Schaefertal case. Concluding remarks of this dissertation showed that (a) the cosmic-ray neutron sensing (CRS) has a strong potential to provide feasible measurement of mean soil moisture at the field scale in cropped fields; (b) CRS soil moisture is strongly influenced by other environmental water pools such as vegetation and snow, therefore these should be considered in analysis; (c) CRS water storage can be used for soil hydrology modelling for determination of soil hydraulic parameters; and (d) CRS approach has strong potential for long term monitoring of soil moisture and for addressing studies of water balance.
In soils and sediments there is a strong coupling between local biogeochemical processes and the distribution of water, electron acceptors, acids and nutrients. Both sides are closely related and affect each other from small scale to larger scales. Soil structures such as aggregates, roots, layers or macropores enhance the patchiness of these distributions. At the same time it is difficult to access the spatial distribution and temporal dynamics of these parameter. Noninvasive imaging techniques with high spatial and temporal resolution overcome these limitations. And new non-invasive techniques are needed to study the dynamic interaction of plant roots with the surrounding soil, but also the complex physical and chemical processes in structured soils. In this study we developed an efficient non-destructive in-situ method to determine biogeochemical parameters relevant to plant roots growing in soil. This is a quantitative fluorescence imaging method suitable for visualizing the spatial and temporal pH changes around roots. We adapted the fluorescence imaging set-up and coupled it with neutron radiography to study simultaneously root growth, oxygen depletion by respiration activity and root water uptake. The combined set up was subsequently applied to a structured soil system to map the patchy structure of oxic and anoxic zones induced by a chemical oxygen consumption reaction for spatially varying water contents. Moreover, results from a similar fluorescence imaging technique for nitrate detection were complemented by a numerical modeling study where we used imaging data, aiming to simulate biodegradation under anaerobic, nitrate reducing conditions.
Antarctic glacier forfields are extreme environments and pioneer sites for ecological succession. The Antarctic continent shows microbial community development as a natural laboratory because of its special environment, geographic isolation and little anthropogenic influence. Increasing temperatures due to global warming lead to enhanced deglaciation processes in cold-affected habitats and new terrain is becoming exposed to soil formation and accessible for microbial colonisation. This study aims to understand the structure and development of glacier forefield bacterial communities, especially how soil parameters impact the microorganisms and how those are adapted to the extreme conditions of the habitat. To this effect, a combination of cultivation experiments, molecular, geophysical and geochemical analysis was applied to examine two glacier forfields of the Larsemann Hills, East Antarctica. Culture-independent molecular tools such as terminal restriction length polymorphism (T-RFLP), clone libraries and quantitative real-time PCR (qPCR) were used to determine bacterial diversity and distribution. Cultivation of yet unknown species was carried out to get insights in the physiology and adaptation of the microorganisms. Adaptation strategies of the microorganisms were studied by determining changes of the cell membrane phospholipid fatty acid (PLFA) inventory of an isolated bacterium in response to temperature and pH fluctuations and by measuring enzyme activity at low temperature in environmental soil samples. The two studied glacier forefields are extreme habitats characterised by low temperatures, low water availability and small oligotrophic nutrient pools and represent sites of different bacterial succession in relation to soil parameters. The investigated sites showed microbial succession at an early step of soil formation near the ice tongue in comparison to closely located but rather older and more developed soil from the forefield. At the early step the succession is influenced by a deglaciation-dependent areal shift of soil parameters followed by a variable and prevalently depth-related distribution of the soil parameters that is driven by the extreme Antarctic conditions. The dominant taxa in the glacier forefields are Actinobacteria, Acidobacteria, Proteobacteria, Bacteroidetes, Cyanobacteria and Chloroflexi. The connection of soil characteristics with bacterial community structure showed that soil parameter and soil formation along the glacier forefield influence the distribution of certain phyla. In the early step of succession the relative undifferentiated bacterial diversity reflects the undifferentiated soil development and has a high potential to shift according to past and present environmental conditions. With progressing development environmental constraints such as water or carbon limitation have a greater influence. Adapting the culturing conditions to the cold and oligotrophic environment, the number of culturable heterotrophic bacteria reached up to 108 colony forming units per gram soil and 148 isolates were obtained. Two new psychrotolerant bacteria, Herbaspirillum psychrotolerans PB1T and Chryseobacterium frigidisoli PB4T, were characterised in detail and described as novel species in the family of Oxalobacteraceae and Flavobacteriaceae, respectively. The isolates are able to grow at low temperatures tolerating temperature fluctuations and they are not specialised to a certain substrate, therefore they are well-adapted to the cold and oligotrophic environment. The adaptation strategies of the microorganisms were analysed in environmental samples and cultures focussing on extracellular enzyme activity at low temperature and PLFA analyses. Extracellular phosphatases (pH 11 and pH 6.5), β-glucosidase, invertase and urease activity were detected in the glacier forefield soils at low temperature (14°C) catalysing the conversion of various compounds providing necessary substrates and may further play a role in the soil formation and total carbon turnover of the habitat. The PLFA analysis of the newly isolated species C. frigidisoli showed that the cold-adapted strain develops different strategies to maintain the cell membrane function under changing environmental conditions by altering the PLFA inventory at different temperatures and pH values. A newly discovered fatty acid, which was not found in any other microorganism so far, significantly increased at decreasing temperature and low pH and thus plays an important role in the adaption of C. frigidisoli. This work gives insights into the diversity, distribution and adaptation mechanisms of microbial communities in oligotrophic cold-affected soils and shows that Antarctic glacier forefields are suitable model systems to study bacterial colonisation in connection to soil formation.
Within a research project about future sustainable water management options in the Elbe River basin, quasi-natural discharge scenarios had to be provided. The semi-distributed eco-hydrological model SWIM was utilised for this task. According to scenario simulations driven by the stochastical climate model STAR, the region would get distinctly drier. However, this thesis focuses on the challenge of meeting the requirement of high model fidelity even for smaller sub-basins. Usually, the quality of the simulations is lower at inner points than at the outlet. Four research paper chapters and the discussion chapter deal with the reasons for local model deviations and the problem of optimal spatial calibration. Besides other assessments, the Markov Chain Monte Carlo method is applied to show whether evapotranspiration or precipitation should be corrected to minimise runoff deviations, principal component analysis is used in an unusual way to evaluate local precipitation alterations by land cover changes, and remotely sensed surface temperatures allow for an independent view on the evapotranspiration landscape. The overall insight is that spatially explicit hydrological modelling of such a large river basin requires a lot of local knowledge. It probably needs more time to obtain such knowledge as is usually provided for hydrological modelling studies.
Logging and large earthquakes are disturbances that may significantly affect hydrological and erosional processes and process rates, although in decisively different ways. Despite numerous studies that have documented the impacts of both deforestation and earthquakes on water and sediment fluxes, a number of details regarding the timing and type of de- and reforestation; seismic impacts on subsurface water fluxes; or the overall geomorphic work involved have remained unresolved. The main objective of this thesis is to address these shortcomings and to better understand and compare the hydrological and erosional process responses to such natural and man-made disturbances. To this end, south-central Chile provides an excellent natural laboratory owing to its high seismicity and the ongoing conversion of land into highly productive plantation forests. In this dissertation I combine paired catchment experiments, data analysis techniques, and physics-based modelling to investigate: 1) the effect of plantation forests on water resources, 2) the source and sink behavior of timber harvest areas in terms of overland flow generation and sediment fluxes, 3) geomorphic work and its efficiency as a function of seasonal logging, 4) possible hydrologic responses of the saturated zone to the 2010 Maule earthquake and 5) responses of the vadose zone to this earthquake. Re 1) In order to quantify the hydrologic impact of plantation forests, it is fundamental to first establish their water balances. I show that tree species is not significant in this regard, i.e. Pinus radiata and Eucalyptus globulus do not trigger any decisive different hydrologic response. Instead, water consumption is more sensitive to soil-water supply for the local hydro-climatic conditions. Re 2) Contradictory opinions exist about whether timber harvest areas (THA) generate or capture overland flow and sediment. Although THAs contribute significantly to hydrology and sediment transport because of their spatial extent, little is known about the hydrological and erosional processes occurring on them. I show that THAs may act as both sources and sinks for overland flow, which in turn intensifies surface erosion. Above a rainfall intensity of ~20 mm/h, which corresponds to <10% of all rainfall, THAs may generate runoff whereas below that threshold they remain sinks. The overall contribution of Hortonian runoff is thus secondary considering the local rainfall regime. The bulk of both runoff and sediment is generated by Dunne, saturation excess, overland flow. I also show that logging may increase infiltrability on THAs which may cause an initial decrease in streamflow followed by an increase after the groundwater storage has been refilled. Re 3) I present changes in frequency-magnitude distributions following seasonal logging by applying Quantile Regression Forests at hitherto unprecedented detail. It is clearly the season that controls the hydro-geomorphic work efficiency of clear cutting. Logging, particularly dry seasonal logging, caused a shift of work efficiency towards less flashy and mere but more frequent moderate rainfall-runoff events. The sediment transport is dominated by Dunne overland flow which is consistent with physics-based modelling using WASA-SED. Re 4) It is well accepted that earthquakes may affect hydrological processes in the saturated zone. Assuming such flow conditions, consolidation of saturated saprolitic material is one possible response. Consolidation raises the hydraulic gradients which may explain the observed increase in discharge following earthquakes. By doing so, squeezed water saturates the soil which in turn increases the water accessible for plant transpiration. Post-seismic enhanced transpiration is reflected in the intensification of diurnal cycling. Re 5) Assuming unsaturated conditions, I present the first evidence that the vadose zone may also respond to seismic waves by releasing pore water which in turn feeds groundwater reservoirs. By doing so, water tables along the valley bottoms are elevated thus providing additional water resources to the riparian vegetation. By inverse modelling, the transient increase in transpiration is found to be 30-60%. Based on the data available, both hypotheses, are not testable. Finally, when comparing the hydrological and erosional effects of the Maule earthquake with the impact of planting exotic plantation forests, the overall observed earthquake effects are comparably small, and limited to short time scales.
The Arctic is considered as a focal region in the ongoing climate change debate. The currently observed and predicted climate warming is particularly pronounced in the high northern latitudes. Rising temperatures in the Arctic cause progressive deepening and duration of permafrost thawing during the arctic summer, creating an ‘active layer’ with high bioavailability of nutrients and labile carbon for microbial consumption. The microbial mineralization of permafrost carbon creates large amounts of greenhouse gases, including carbon dioxide and methane, which can be released to the atmosphere, creating a positive feedback to global warming. However, to date, the microbial communities that drive the overall carbon cycle and specifically methane production in the Arctic are poorly constrained. To assess how these microbial communities will respond to the predicted climate changes, such as an increase in atmospheric and soil temperatures causing increased bioavailability of organic carbon, it is necessary to investigate the current status of this environment, but also how these microbial communities reacted to climate changes in the past. This PhD thesis investigated three records from two different study sites in the Russian Arctic, including permafrost, lake shore and lake deposits from Siberia and Chukotka. A combined stratigraphic approach of microbial and molecular organic geochemical techniques were used to identify and quantify characteristic microbial gene and lipid biomarkers. Based on this data it was possible to characterize and identify the climate response of microbial communities involved in past carbon cycling during the Middle Pleistocene and the Late Pleistocene to Holocene. It is shown that previous warmer periods were associated with an expansion of bacterial and archaeal communities throughout the Russian Arctic, similar to present day conditions. Different from this situation, past glacial and stadial periods experienced a substantial decrease in the abundance of Bacteria and Archaea. This trend can also be confirmed for the community of methanogenic archaea that were highly abundant and diverse during warm and particularly wet conditions. For the terrestrial permafrost, a direct effect of the temperature on the microbial communities is likely. In contrast, it is suggested that the temperature rise in scope of the glacial-interglacial climate variations led to an increase of the primary production in the Arctic lake setting, as can be seen in the corresponding biogenic silica distribution. The availability of this algae-derived carbon is suggested to be a driver for the observed pattern in the microbial abundance. This work demonstrates the effect of climate changes on the community composition of methanogenic archae. Methanosarcina-related species were abundant throughout the Russian Arctic and were able to adapt to changing environmental conditions. In contrast, members of Methanocellales and Methanomicrobiales were not able to adapt to past climate changes. This PhD thesis provides first evidence that past climatic warming led to an increased abundance of microbial communities in the Arctic, closely linked to the cycling of carbon and methane production. With the predicted climate warming, it may, therefore, be anticipated that extensive amounts of microbial communities will develop. Increasing temperatures in the Arctic will affect the temperature sensitive parts of the current microbiological communities, possibly leading to a suppression of cold adapted species and the prevalence of methanogenic archaea that tolerate or adapt to increasing temperatures. These changes in the composition of methanogenic archaea will likely increase the methane production potential of high latitude terrestrial regions, changing the Arctic from a carbon sink to a source.
The Arctic tundra, covering approx. 5.5 % of the Earth’s land surface, is one of the last ecosystems remaining closest to its untouched condition. Remote sensing is able to provide information at regular time intervals and large spatial scales on the structure and function of Arctic ecosystems. But almost all natural surfaces reveal individual anisotropic reflectance behaviors, which can be described by the bidirectional reflectance distribution function (BRDF). This effect can cause significant changes in the measured surface reflectance depending on solar illumination and sensor viewing geometries. The aim of this thesis is the hyperspectral and spectro-directional reflectance characterization of important Arctic tundra vegetation communities at representative Siberian and Alaskan tundra sites as basis for the extraction of vegetation parameters, and the normalization of BRDF effects in off-nadir and multi-temporal remote sensing data. Moreover, in preparation for the upcoming German EnMAP (Environmental Mapping and Analysis Program) satellite mission, the understanding of BRDF effects in Arctic tundra is essential for the retrieval of high quality, consistent and therefore comparable datasets. The research in this doctoral thesis is based on field spectroscopic and field spectro-goniometric investigations of representative Siberian and Alaskan measurement grids. The first objective of this thesis was the development of a lightweight, transportable, and easily managed field spectro-goniometer system which nevertheless provides reliable spectro-directional data. I developed the Manual Transportable Instrument platform for ground-based Spectro-directional observations (ManTIS). The outcome of the field spectro-radiometrical measurements at the Low Arctic study sites along important environmental gradients (regional climate, soil pH, toposequence, and soil moisture) show that the different plant communities can be distinguished by their nadir-view reflectance spectra. The results especially reveal separation possibilities between the different tundra vegetation communities in the visible (VIS) blue and red wavelength regions. Additionally, the near-infrared (NIR) shoulder and NIR reflectance plateau, despite their relatively low values due to the low structure of tundra vegetation, are still valuable information sources and can separate communities according to their biomass and vegetation structure. In general, all different tundra plant communities show: (i) low maximum NIR reflectance; (ii) a weakly or nonexistent visible green reflectance peak in the VIS spectrum; (iii) a narrow “red-edge” region between the red and NIR wavelength regions; and (iv) no distinct NIR reflectance plateau. These common nadir-view reflectance characteristics are essential for the understanding of the variability of BRDF effects in Arctic tundra. None of the analyzed tundra communities showed an even closely isotropic reflectance behavior. In general, tundra vegetation communities: (i) usually show the highest BRDF effects in the solar principal plane; (ii) usually show the reflectance maximum in the backward viewing directions, and the reflectance minimum in the nadir to forward viewing directions; (iii) usually have a higher degree of reflectance anisotropy in the VIS wavelength region than in the NIR wavelength region; and (iv) show a more bowl-shaped reflectance distribution in longer wavelength bands (>700 nm). The results of the analysis of the influence of high sun zenith angles on the reflectance anisotropy show that with increasing sun zenith angles, the reflectance anisotropy changes to azimuthally symmetrical, bowl-shaped reflectance distributions with the lowest reflectance values in the nadir view position. The spectro-directional analyses also show that remote sensing products such as the NDVI or relative absorption depth products are strongly influenced by BRDF effects, and that the anisotropic characteristics of the remote sensing products can significantly differ from the observed BRDF effects in the original reflectance data. But the results further show that the NDVI can minimize view angle effects relative to the contrary spectro-directional effects in the red and NIR bands. For the researched tundra plant communities, the overall difference of the off-nadir NDVI values compared to the nadir value increases with increasing sensor viewing angles, but on average never exceeds 10 %. In conclusion, this study shows that changes in the illumination-target-viewing geometry directly lead to an altering of the reflectance spectra of Arctic tundra communities according to their object-specific BRDFs. Since the different tundra communities show only small, but nonetheless significant differences in the surface reflectance, it is important to include spectro-directional reflectance characteristics in the algorithm development for remote sensing products.
In March 2010, the project CoCoCo (incipient COntinent-COntinent COllision) recorded a 650 km long amphibian N-S wide-angle seismic profile, extending from the Eratosthenes Seamount (ESM) across Cyprus and southern Turkey to the Anatolian plateau. The aim of the project is to reveal the impact of the transition from subduction to continent-continent collision of the African plate with the Cyprus-Anatolian plate. A visual quality check, frequency analysis and filtering were applied to the seismic data and reveal a good data quality. Subsequent first break picking, finite-differences ray tracing and inversion of the offshore wide-angle data leads to a first-arrival tomographic model. This model reveals (1) P-wave velocities lower than 6.5 km/s in the crust, (2) a variable crustal thickness of about 28 - 37 km and (3) an upper crustal reflection at 5 km depth beneath the ESM. Two land shots on Turkey, also recorded on Cyprus, airgun shots south of Cyprus and geological and previous seismic investigations provide the information to derive a layered velocity model beneath the Anatolian plateau and for the ophiolite complex on Cyprus. The analysis of the reflections provides evidence for a north-dipping plate subducting beneath Cyprus. The main features of this layered velocity model are (1) an upper and lower crust with large lateral changes of the velocity structure and thickness, (2) a Moho depth of about 38 - 45 km beneath the Anatolian plateau, (3) a shallow north-dipping subducting plate below Cyprus with an increasing dip and (4) a typical ophiolite sequence on Cyprus with a total thickness of about 12 km. The offshore-onshore seismic data complete and improve the information about the velocity structure beneath Cyprus and the deeper part of the offshore tomographic model. Thus, the wide-angle seismic data provide detailed insights into the 2-D geometry and velocity structures of the uplifted and overriding Cyprus-Anatolian plate. Subsequent gravity modelling confirms and extends the crustal P-wave velocity model. The deeper part of the subducting plate is constrained by the gravity data and has a dip angle of ~ 28°. Finally, an integrated analysis of the geophysical and geological information allows a comprehensive interpretation of the crustal structure related to the collision process.