Refine
Has Fulltext
- yes (4) (remove)
Document Type
- Doctoral Thesis (4) (remove)
Is part of the Bibliography
- yes (4)
Keywords
- monitoring (4) (remove)
Institute
Die zerstörungsfreien Prüfungen von Bauwerken mit Hilfe von Ultraschallmessverfahren haben in den letzten Jahren an Bedeutung gewonnen. Durch Ultraschallmessungen können die Geometrien von Bauteilen bestimmt sowie von außen nicht sichtbare Fehler wie Delaminationen und Kiesnester erkannt werden.
Mit neuartigen, in das Betonbauteil eingebetteten Ultraschallprüfköpfen sollen nun Bauwerke dauerhaft auf Veränderungen überprüft werden. Dazu werden Ultraschallsignale direkt im Inneren eines Bauteils erzeugt, was die Möglichkeiten der herkömmlichen Methoden der Bauwerksüberwachung wesentlich erweitert. Ein Ultraschallverfahren könnte mit eingebetteten Prüfköpfen ein Betonbauteil kontinuierlich integral überwachen und damit auch stetig fortschreitende Gefügeänderungen, wie beispielsweise Mikrorisse, registrieren.
Sicherheitsrelevante Bauteile, die nach dem Einbau für Messungen unzugänglich oder mittels Ultraschall, beispielsweise durch zusätzliche Beschichtungen der Oberfläche, nicht prüfbar sind, lassen sich mit eingebetteten Prüfköpfen überwachen. An bereits vorhandenen Bauwerken können die Ultraschallprüfköpfe mithilfe von Bohrlöchern und speziellem Verpressmörtel auch nachträglich in das Bauteil integriert werden. Für Fertigbauteile bieten sich eingebettete Prüfköpfe zur Herstellungskontrolle sowie zur Überwachung der Baudurchführung als Werkzeug der Qualitätssicherung an. Auch die schnelle Schadensanalyse eines Bauwerks nach Naturkatastrophen, wie beispielsweise einem Erdbeben oder einer Flut, ist denkbar.
Durch die gute Ankopplung ermöglichen diese neuartigen Prüfköpfe den Einsatz von empfindlichen Auswertungsmethoden, wie die Kreuzkorrelation, die Coda-Wellen-Interferometrie oder die Amplitudenauswertung, für die Signalanalyse. Bei regelmäßigen Messungen können somit sich anbahnende Schäden eines Bauwerks frühzeitig erkannt werden.
Da die Schädigung eines Bauwerks keine direkt messbare Größe darstellt, erfordert eine eindeutige Schadenserkennung in der Regel die Messung mehrerer physikalischer Größen die geeignet verknüpft werden. Physikalische Größen können sein: Ultraschalllaufzeit, Amplitude des Ultraschallsignals und Umgebungstemperatur. Dazu müssen Korrelationen zwischen dem Zustand des Bauwerks, den Umgebungsbedingungen und den Parametern des gemessenen Ultraschallsignals untersucht werden.
In dieser Arbeit werden die neuartigen Prüfköpfe vorgestellt. Es wird beschrieben, dass sie sich, sowohl in bereits errichtete Betonbauwerke als auch in der Konstruktion befindliche, einbauen lassen. Experimentell wird gezeigt, dass die Prüfköpfe in mehreren Ebenen eingebettet sein können da ihre Abstrahlcharakteristik im Beton nahezu ungerichtet ist. Die Mittenfrequenz von rund 62 kHz ermöglicht Abstände, je nach Betonart und SRV, von mindestens 3 m zwischen Prüfköpfen die als Sender und Empfänger arbeiten. Die Empfindlichkeit der eingebetteten Prüfköpfe gegenüber Veränderungen im Beton wird an Hand von zwei Laborexperimenten gezeigt, einem Drei-Punkt-Biegeversuch und einem Versuch zur Erzeugung von Frost-Tau-Wechsel Schäden. Die Ergebnisse werden mit anderen zerstörungsfreien Prüfverfahren verglichen. Es zeigt sich, dass die Prüfköpfe durch die Anwendung empfindlicher Auswertemethoden, auftretende Risse im Beton detektieren, bevor diese eine Gefahr für das Bauwerk darstellen. Abschließend werden Beispiele von Installation der neuartigen Ultraschallprüfköpfe in realen Bauteilen, zwei Brücken und einem Fundament, gezeigt und basierend auf dort gewonnenen ersten Erfahrungen ein Konzept für die Umsetzung einer Langzeitüberwachung aufgestellt.
In den letzten 20 Jahren hat sich der Maiszünsler (Ostrinia nubilalis HÜBNER), aus der Schmetterlingsfamilie der Pyralidae oder Zünsler, zum bedeutendsten tierischen Schädling des Maises (Zea mays) entwickelt. Eine Möglichkeit den Befall des Maiszünslers abzuwenden, bietet der Anbau von Bacillus thuringiensis-Mais (Bt-Mais). Mit Hilfe der Gentechnik wurden Gene des Bakteriums Bacillus thuringiensis übertragen, die einen für Fraßinsekten giftigen Wirkstoff bilden, wodurch die Pflanzen während der kompletten Vegetation vor den Larven des Maiszünslers geschützt sind. Ziel des vorliegenden Projektes war es, in einer 3-jährigen Studie die Auswirkungen des großflächigen Anbaus von Bt-Mais auf die ökologische Situation und den Handlungsrahmen des integrierten Pflanzenschutzes komplex zu untersuchen. Dazu wurden in Betrieben im Oderbruch, das als permanentes Befallsgebiet des Maiszünslers gilt, in den Jahren 2002 bis 2004 jährlich zwei Felder mit jeweils einer Bt-Sorte und einer konventionellen Sorte angelegt. Zusätzlich wurden biologische und chemische Maiszünsler-Bekämpfungsvarianten geprüft. Durch verschiedene Methoden wie Bonituren, Ganzpflanzenernten, Bodenfallenfänge und Beobachtungen des Wahlverhaltens von (Flug-)insekten konnten Aussagen zum Vorkommen von Insekten und Spinnentieren getroffen werden, wobei hierfür Daten aus Untersuchungen der Jahre 2000 und 2001 im Oderbruch ergänzend herangezogen werden konnten. Durch Ertragsmessungen, Energie- und Qualitätsermittlungen, sowie Fusarium- und Mykotoxinanalysen konnte der Anbau von Bt-Mais als neue Alternative zur Bekämpfung des Maiszünslers bewertet werden. Bezüglich des Auftretens von Insekten und Spinnentieren wurden im Mittel der fünfjährigen Datenerhebung beim Vergleich der Bt-Sorte zur konventionellen Sorte, mit Ausnahme der fast 100 %igen Bekämpfung des Maiszünslers, keine signifikanten Unterschiede festgestellt. Hierfür wurde ein besonderes Augenmerk auf Thripse, Wanzen, Blattläuse und deren Fraßfeinde, sowie mittels Bodenfallenfängen auf Laufkäfer und Spinnen gerichtet. Die erwarteten ökonomischen Vorteile wie etwa Ertragsplus oder bessere Nährstoff- und Energiegehalte durch geringeren Schaden beim Anbau von Bt-Mais als Silomais blieben in den Untersuchungsjahren aus. Allerdings zeigten Fusarium- und Mykotoxinanalysen eine geringere Belastung des Bt-Maises, was möglicherweise auf den geringeren Schaden zurückzuführen ist, da beschädigte Pflanzen für Fusarium und Mykotoxine anfälliger sind. Desweiteren konnten erste methodische Ansätze für ein auf EU-Ebene gefordertes, den Anbau von Bt-Mais begleitendes Monitoring, erarbeitet werden. So konnten Vorschläge für geeignete Methoden, deren Umfang sowie des Zeitpunktes der Durchführungen gemacht werden.
Merapi volcano is one of the most active and dangerous volcanoes of the earth. Located in central part of Java island (Indonesia), even a moderate eruption of Merapi poses a high risk to the highly populated area. Due to the close relationship between the volcanic unrest and the occurrence of seismic events at Mt. Merapi, the monitoring of Merapi's seismicity plays an important role for recognizing major changes in the volcanic activity. An automatic seismic event detection and classification system, which is capable to characterize the actual seismic activity in near real-time, is an important tool which allows the scientists in charge to take immediate decisions during a volcanic crisis. In order to accomplish the task of detecting and classifying volcano-seismic signals automatically in the continuous data streams, a pattern recognition approach has been used. It is based on the method of hidden Markov models (HMM), a technique, which has proven to provide high recognition rates at high confidence levels in classification tasks of similar complexity (e.g. speech recognition). Any pattern recognition system relies on the appropriate representation of the input data in order to allow a reasonable class-decision by means of a mathematical test function. Based on the experiences from seismological observatory practice, a parametrization scheme of the seismic waveform data is derived using robust seismological analysis techniques. The wavefield parameters are summarized into a real-valued feature vector per time step. The time series of this feature vector build the basis for the HMM-based classification system. In order to make use of discrete hidden Markov (DHMM) techniques, the feature vectors are further processed by applying a de-correlating and prewhitening transformation and additional vector quantization. The seismic wavefield is finally represented as a discrete symbol sequence with a finite alphabet. This sequence is subject to a maximum likelihood test against the discrete hidden Markov models, learned from a representative set of training sequences for each seismic event type of interest. A time period from July, 1st to July, 5th, 1998 of rapidly increasing seismic activity prior to the eruptive cycle between July, 10th and July, 19th, 1998 at Merapi volcano is selected for evaluating the performance of this classification approach. Three distinct types of seismic events according to the established classification scheme of the Volcanological Survey of Indonesia (VSI) have been observed during this time period. Shallow volcano-tectonic events VTB (h < 2.5 km), very shallow dome-growth related seismic events MP (h < 1 km) and seismic signals connected to rockfall activity originating from the active lava dome, termed Guguran. The special configuration of the digital seismic station network at Merapi volcano, a combination of small-aperture array deployments surrounding Merapi's summit region, allows the use of array methods to parametrize the continuously recorded seismic wavefield. The individual signal parameters are analyzed to determine their relevance for the discrimination of seismic event classes. For each of the three observed event types a set of DHMMs has been trained using a selected set of seismic events with varying signal to noise ratios and signal durations. Additionally, two sets of discrete hidden Markov models have been derived for the seismic noise, incorporating the fact, that the wavefield properties of the ambient vibrations differ considerably during working hours and night time. A total recognition accuracy of 67% is obtained. The mean false alarm (FA) rate can be given by 41 FA/class/day. However, variations in the recognition capabilities for the individual seismic event classes are significant. Shallow volcano-tectonic signals (VTB) show very distinct wavefield properties and (at least in the selected time period) a stable time pattern of wavefield attributes. The DHMM-based classification performs therefore best for VTB-type events, with almost 89% recognition accuracy and 2 FA/day. Seismic signals of the MP- and Guguran-classes are more difficult to detect and classify. Around 64% of MP-events and 74% of Guguran signals are recognized correctly. The average false alarm rate for MP-events is 87 FA/day, whereas for Guguran signals 33 FA/day are obtained. However, the majority of missed events and false alarms for both MP and Guguran events are due to confusion errors between these two event classes in the recognition process. The confusion of MP and Guguran events is interpreted as being a consequence of the selected parametrization approach for the continuous seismic data streams. The observed patterns of the analyzed wavefield attributes for MP and Guguran events show a significant amount of similarity, thus providing not sufficient discriminative information for the numerical classification. The similarity of wavefield parameters obtained for seismic events of MP and Guguran type reflect the commonly observed dominance of path effects on the seismic wave propagation in volcanic environments. The recognition rates obtained for the five-day period of increasing seismicity show, that the presented DHMM-based automatic classification system is a promising approach for the difficult task of classifying volcano-seismic signals. Compared to standard signal detection algorithms, the most significant advantage of the discussed technique is, that the entire seismogram is detected and classified in a single step.
Large areas in the humid tropics are currently undergoing land-use change. The decrease of tropical rainforest, which is felled for land clearing and timber production, is countered by increasing areas of tree plantations and secondary forests. These changes are known to affect the regional water cycle as a result of plant-specific water demand and by influencing key soil properties which determine hydrological flow paths. One of these key properties sensitive to land-use change is the saturated hydraulic conductivity (Ks) as it governs vertical percolation of water within the soil profile. Low values of Ks in a certain soil depth can form an impeding layer and lead to perched water tables and the development of predominantly lateral flow paths such as overland flow. These processes can induce nutrient redistribution, erosion and soil degradation and thus affect ecosystem services and human livelihoods. Due to its sensitivity to land-use change, Ks is commonly used to assess the associated changes in hydrological flow paths. The objective of this dissertation was to assess the effect of land-use change on hydrological flow paths by analysing Ks as indicator variable. Sources of Ks variability, their implications for Ks monitoring and the relationship between Ks and near-surface hydrological flow paths in the context of land-use change were studied. The research area was located in central Panama, a country widely experiencing the abovementioned changes in land use. Ks is dependent on both static, soil-inherent properties such as particle size and clay mineralogy and dynamic, land use-dependent properties such as organic carbon content. By conducting a pair of studies with one of these influences held constant in each, the importance of static and dynamic properties for Ks was assessed. Applying a space-for-time approach to sample Ks under secondary forests of different age classes on comparable soils, a recovery of Ks from the former pasture use was shown to require more than eight years. The process was limited to the 0−6 cm sampling depth and showed large variability among replicates. A wavelet analysis of a Ks transect crossing different soil map units under comparable land cover, old-growth tropical rainforest, showed large small-scale variability, which was attributed to biotic influences, as well as a possible but non-conclusive influence of soil types. The two results highlight the importance of dynamic, land use-dependent influences on Ks. Monitoring studies can help to quantify land use-induced change of Ks, but there is a variety of sampling designs which differ in efficiency of estimating mean Ks. A comparative study of four designs and their suitability for Ks monitoring is used to give recommendations about designing a Ks monitoring scheme. Quantifying changes in spatial means of Ks for small catchments with a rotational stratified sampling design did not prove to be more efficient than Simple Random Sampling. The lack of large-scale spatial structure prevented benefits of stratification, and large small-scale variability resulting from local biotic processes and artificial effects of destructive sampling caused a lack of temporal consistency in the re-sampling of locations, which is part of the rotational design. The relationship between Ks and near-surface hydrological flow paths is of critical importance when assessing the consequences of land-use change in the humid tropics. The last part of this dissertation aimed at disclosing spatial relationships between Ks and overland flow as influenced by different land cover types. The effects of Ks on overland-flow generation were spatially variable, different between planar plots and incised flowlines and strongly influenced by land-cover characteristics. A simple comparison of Ks values and rainfall intensities was insufficient to describe the observed pattern of overland flow. Likewise, event flow in the stream was apparently not directly related to overland flow response patterns within the catchments. The study emphasises the importance of combining pedological, hydrological, meteorological and botanical measurements to comprehensively understand the land use-driven change in hydrological flow paths. In summary, Ks proved to be a suitable parameter for assessing the influence of land-use change on soils and hydrological processes. The results illustrated the importance of land cover and spatial variability of Ks for decisions on sampling designs and for interpreting overland-flow generation. As relationships between Ks and overland flow were shown to be complex and dependent on land cover, an interdisciplinary approach is required to comprehensively understand the effects of land-use change on soils and near-surface hydrological flow paths in the humid tropics.